iwlwifi: move DVM code into subdirectory

Since we're working on another mode/driver
inside iwlwifi, move the current one into a
subdirectory to more cleanly separate the
code. While at it, rename all the files.

Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

1 files changed, 0 insertions, 3369 deletions

diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-rs.c b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c
deleted file mode 100644
index 8cebd7c363fc..000000000000
--- a/drivers/net/wireless/iwlwifi/iwl-agn-rs.c
+++ /dev/null
@@ -1,3369 +0,0 @@
-/******************************************************************************
- *
- * Copyright(c) 2005 - 2012 Intel Corporation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
- *
- * The full GNU General Public License is included in this distribution in the
- * file called LICENSE.
- *
- * Contact Information:
- *  Intel Linux Wireless <ilw@linux.intel.com>
- * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
- *
- *****************************************************************************/
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/skbuff.h>
-#include <linux/slab.h>
-#include <net/mac80211.h>
-
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/delay.h>
-
-#include <linux/workqueue.h>
-
-#include "iwl-dev.h"
-#include "iwl-agn.h"
-#include "iwl-op-mode.h"
-#include "iwl-modparams.h"
-
-#define RS_NAME "iwl-agn-rs"
-
-#define NUM_TRY_BEFORE_ANT_TOGGLE 1
-#define IWL_NUMBER_TRY      1
-#define IWL_HT_NUMBER_TRY   3
-
-#define IWL_RATE_MAX_WINDOW		62	/* # tx in history window */
-#define IWL_RATE_MIN_FAILURE_TH		6	/* min failures to calc tpt */
-#define IWL_RATE_MIN_SUCCESS_TH		8	/* min successes to calc tpt */
-
-/* max allowed rate miss before sync LQ cmd */
-#define IWL_MISSED_RATE_MAX		15
-/* max time to accum history 2 seconds */
-#define IWL_RATE_SCALE_FLUSH_INTVL   (3*HZ)
-
-static u8 rs_ht_to_legacy[] = {
-	IWL_RATE_6M_INDEX, IWL_RATE_6M_INDEX,
-	IWL_RATE_6M_INDEX, IWL_RATE_6M_INDEX,
-	IWL_RATE_6M_INDEX,
-	IWL_RATE_6M_INDEX, IWL_RATE_9M_INDEX,
-	IWL_RATE_12M_INDEX, IWL_RATE_18M_INDEX,
-	IWL_RATE_24M_INDEX, IWL_RATE_36M_INDEX,
-	IWL_RATE_48M_INDEX, IWL_RATE_54M_INDEX
-};
-
-static const u8 ant_toggle_lookup[] = {
-	/*ANT_NONE -> */ ANT_NONE,
-	/*ANT_A    -> */ ANT_B,
-	/*ANT_B    -> */ ANT_C,
-	/*ANT_AB   -> */ ANT_BC,
-	/*ANT_C    -> */ ANT_A,
-	/*ANT_AC   -> */ ANT_AB,
-	/*ANT_BC   -> */ ANT_AC,
-	/*ANT_ABC  -> */ ANT_ABC,
-};
-
-#define IWL_DECLARE_RATE_INFO(r, s, ip, in, rp, rn, pp, np)    \
-	[IWL_RATE_##r##M_INDEX] = { IWL_RATE_##r##M_PLCP,      \
-				    IWL_RATE_SISO_##s##M_PLCP, \
-				    IWL_RATE_MIMO2_##s##M_PLCP,\
-				    IWL_RATE_MIMO3_##s##M_PLCP,\
-				    IWL_RATE_##r##M_IEEE,      \
-				    IWL_RATE_##ip##M_INDEX,    \
-				    IWL_RATE_##in##M_INDEX,    \
-				    IWL_RATE_##rp##M_INDEX,    \
-				    IWL_RATE_##rn##M_INDEX,    \
-				    IWL_RATE_##pp##M_INDEX,    \
-				    IWL_RATE_##np##M_INDEX }
-
-/*
- * Parameter order:
- *   rate, ht rate, prev rate, next rate, prev tgg rate, next tgg rate
- *
- * If there isn't a valid next or previous rate then INV is used which
- * maps to IWL_RATE_INVALID
- *
- */
-const struct iwl_rate_info iwl_rates[IWL_RATE_COUNT] = {
-	IWL_DECLARE_RATE_INFO(1, INV, INV, 2, INV, 2, INV, 2),    /*  1mbps */
-	IWL_DECLARE_RATE_INFO(2, INV, 1, 5, 1, 5, 1, 5),          /*  2mbps */
-	IWL_DECLARE_RATE_INFO(5, INV, 2, 6, 2, 11, 2, 11),        /*5.5mbps */
-	IWL_DECLARE_RATE_INFO(11, INV, 9, 12, 9, 12, 5, 18),      /* 11mbps */
-	IWL_DECLARE_RATE_INFO(6, 6, 5, 9, 5, 11, 5, 11),        /*  6mbps */
-	IWL_DECLARE_RATE_INFO(9, 6, 6, 11, 6, 11, 5, 11),       /*  9mbps */
-	IWL_DECLARE_RATE_INFO(12, 12, 11, 18, 11, 18, 11, 18),   /* 12mbps */
-	IWL_DECLARE_RATE_INFO(18, 18, 12, 24, 12, 24, 11, 24),   /* 18mbps */
-	IWL_DECLARE_RATE_INFO(24, 24, 18, 36, 18, 36, 18, 36),   /* 24mbps */
-	IWL_DECLARE_RATE_INFO(36, 36, 24, 48, 24, 48, 24, 48),   /* 36mbps */
-	IWL_DECLARE_RATE_INFO(48, 48, 36, 54, 36, 54, 36, 54),   /* 48mbps */
-	IWL_DECLARE_RATE_INFO(54, 54, 48, INV, 48, INV, 48, INV),/* 54mbps */
-	IWL_DECLARE_RATE_INFO(60, 60, 48, INV, 48, INV, 48, INV),/* 60mbps */
-	/* FIXME:RS:          ^^    should be INV (legacy) */
-};
-
-static inline u8 rs_extract_rate(u32 rate_n_flags)
-{
-	return (u8)(rate_n_flags & RATE_MCS_RATE_MSK);
-}
-
-static int iwl_hwrate_to_plcp_idx(u32 rate_n_flags)
-{
-	int idx = 0;
-
-	/* HT rate format */
-	if (rate_n_flags & RATE_MCS_HT_MSK) {
-		idx = rs_extract_rate(rate_n_flags);
-
-		if (idx >= IWL_RATE_MIMO3_6M_PLCP)
-			idx = idx - IWL_RATE_MIMO3_6M_PLCP;
-		else if (idx >= IWL_RATE_MIMO2_6M_PLCP)
-			idx = idx - IWL_RATE_MIMO2_6M_PLCP;
-
-		idx += IWL_FIRST_OFDM_RATE;
-		/* skip 9M not supported in ht*/
-		if (idx >= IWL_RATE_9M_INDEX)
-			idx += 1;
-		if ((idx >= IWL_FIRST_OFDM_RATE) && (idx <= IWL_LAST_OFDM_RATE))
-			return idx;
-
-	/* legacy rate format, search for match in table */
-	} else {
-		for (idx = 0; idx < ARRAY_SIZE(iwl_rates); idx++)
-			if (iwl_rates[idx].plcp ==
-					rs_extract_rate(rate_n_flags))
-				return idx;
-	}
-
-	return -1;
-}
-
-static void rs_rate_scale_perform(struct iwl_priv *priv,
-				   struct sk_buff *skb,
-				   struct ieee80211_sta *sta,
-				   struct iwl_lq_sta *lq_sta);
-static void rs_fill_link_cmd(struct iwl_priv *priv,
-			     struct iwl_lq_sta *lq_sta, u32 rate_n_flags);
-static void rs_stay_in_table(struct iwl_lq_sta *lq_sta, bool force_search);
-
-
-#ifdef CONFIG_MAC80211_DEBUGFS
-static void rs_dbgfs_set_mcs(struct iwl_lq_sta *lq_sta,
-			     u32 *rate_n_flags, int index);
-#else
-static void rs_dbgfs_set_mcs(struct iwl_lq_sta *lq_sta,
-			     u32 *rate_n_flags, int index)
-{}
-#endif
-
-/**
- * The following tables contain the expected throughput metrics for all rates
- *
- *	1, 2, 5.5, 11, 6, 9, 12, 18, 24, 36, 48, 54, 60 MBits
- *
- * where invalid entries are zeros.
- *
- * CCK rates are only valid in legacy table and will only be used in G
- * (2.4 GHz) band.
- */
-
-static s32 expected_tpt_legacy[IWL_RATE_COUNT] = {
-	7, 13, 35, 58, 40, 57, 72, 98, 121, 154, 177, 186, 0
-};
-
-static s32 expected_tpt_siso20MHz[4][IWL_RATE_COUNT] = {
-	{0, 0, 0, 0, 42, 0,  76, 102, 124, 159, 183, 193, 202}, /* Norm */
-	{0, 0, 0, 0, 46, 0,  82, 110, 132, 168, 192, 202, 210}, /* SGI */
-	{0, 0, 0, 0, 47, 0,  91, 133, 171, 242, 305, 334, 362}, /* AGG */
-	{0, 0, 0, 0, 52, 0, 101, 145, 187, 264, 330, 361, 390}, /* AGG+SGI */
-};
-
-static s32 expected_tpt_siso40MHz[4][IWL_RATE_COUNT] = {
-	{0, 0, 0, 0,  77, 0, 127, 160, 184, 220, 242, 250, 257}, /* Norm */
-	{0, 0, 0, 0,  83, 0, 135, 169, 193, 229, 250, 257, 264}, /* SGI */
-	{0, 0, 0, 0,  94, 0, 177, 249, 313, 423, 512, 550, 586}, /* AGG */
-	{0, 0, 0, 0, 104, 0, 193, 270, 338, 454, 545, 584, 620}, /* AGG+SGI */
-};
-
-static s32 expected_tpt_mimo2_20MHz[4][IWL_RATE_COUNT] = {
-	{0, 0, 0, 0,  74, 0, 123, 155, 179, 214, 236, 244, 251}, /* Norm */
-	{0, 0, 0, 0,  81, 0, 131, 164, 188, 223, 243, 251, 257}, /* SGI */
-	{0, 0, 0, 0,  89, 0, 167, 235, 296, 402, 488, 526, 560}, /* AGG */
-	{0, 0, 0, 0,  97, 0, 182, 255, 320, 431, 520, 558, 593}, /* AGG+SGI*/
-};
-
-static s32 expected_tpt_mimo2_40MHz[4][IWL_RATE_COUNT] = {
-	{0, 0, 0, 0, 123, 0, 182, 214, 235, 264, 279, 285, 289}, /* Norm */
-	{0, 0, 0, 0, 131, 0, 191, 222, 242, 270, 284, 289, 293}, /* SGI */
-	{0, 0, 0, 0, 171, 0, 305, 410, 496, 634, 731, 771, 805}, /* AGG */
-	{0, 0, 0, 0, 186, 0, 329, 439, 527, 667, 764, 803, 838}, /* AGG+SGI */
-};
-
-static s32 expected_tpt_mimo3_20MHz[4][IWL_RATE_COUNT] = {
-	{0, 0, 0, 0,  99, 0, 153, 186, 208, 239, 256, 263, 268}, /* Norm */
-	{0, 0, 0, 0, 106, 0, 162, 194, 215, 246, 262, 268, 273}, /* SGI */
-	{0, 0, 0, 0, 134, 0, 249, 346, 431, 574, 685, 732, 775}, /* AGG */
-	{0, 0, 0, 0, 148, 0, 272, 376, 465, 614, 727, 775, 818}, /* AGG+SGI */
-};
-
-static s32 expected_tpt_mimo3_40MHz[4][IWL_RATE_COUNT] = {
-	{0, 0, 0, 0, 152, 0, 211, 239, 255, 279,  290,  294,  297}, /* Norm */
-	{0, 0, 0, 0, 160, 0, 219, 245, 261, 284,  294,  297,  300}, /* SGI */
-	{0, 0, 0, 0, 254, 0, 443, 584, 695, 868,  984, 1030, 1070}, /* AGG */
-	{0, 0, 0, 0, 277, 0, 478, 624, 737, 911, 1026, 1070, 1109}, /* AGG+SGI */
-};
-
-/* mbps, mcs */
-static const struct iwl_rate_mcs_info iwl_rate_mcs[IWL_RATE_COUNT] = {
-	{  "1", "BPSK DSSS"},
-	{  "2", "QPSK DSSS"},
-	{"5.5", "BPSK CCK"},
-	{ "11", "QPSK CCK"},
-	{  "6", "BPSK 1/2"},
-	{  "9", "BPSK 1/2"},
-	{ "12", "QPSK 1/2"},
-	{ "18", "QPSK 3/4"},
-	{ "24", "16QAM 1/2"},
-	{ "36", "16QAM 3/4"},
-	{ "48", "64QAM 2/3"},
-	{ "54", "64QAM 3/4"},
-	{ "60", "64QAM 5/6"},
-};
-
-#define MCS_INDEX_PER_STREAM	(8)
-
-static void rs_rate_scale_clear_window(struct iwl_rate_scale_data *window)
-{
-	window->data = 0;
-	window->success_counter = 0;
-	window->success_ratio = IWL_INVALID_VALUE;
-	window->counter = 0;
-	window->average_tpt = IWL_INVALID_VALUE;
-	window->stamp = 0;
-}
-
-static inline u8 rs_is_valid_ant(u8 valid_antenna, u8 ant_type)
-{
-	return (ant_type & valid_antenna) == ant_type;
-}
-
-/*
- *	removes the old data from the statistics. All data that is older than
- *	TID_MAX_TIME_DIFF, will be deleted.
- */
-static void rs_tl_rm_old_stats(struct iwl_traffic_load *tl, u32 curr_time)
-{
-	/* The oldest age we want to keep */
-	u32 oldest_time = curr_time - TID_MAX_TIME_DIFF;
-
-	while (tl->queue_count &&
-	       (tl->time_stamp < oldest_time)) {
-		tl->total -= tl->packet_count[tl->head];
-		tl->packet_count[tl->head] = 0;
-		tl->time_stamp += TID_QUEUE_CELL_SPACING;
-		tl->queue_count--;
-		tl->head++;
-		if (tl->head >= TID_QUEUE_MAX_SIZE)
-			tl->head = 0;
-	}
-}
-
-/*
- *	increment traffic load value for tid and also remove
- *	any old values if passed the certain time period
- */
-static u8 rs_tl_add_packet(struct iwl_lq_sta *lq_data,
-			   struct ieee80211_hdr *hdr)
-{
-	u32 curr_time = jiffies_to_msecs(jiffies);
-	u32 time_diff;
-	s32 index;
-	struct iwl_traffic_load *tl = NULL;
-	u8 tid;
-
-	if (ieee80211_is_data_qos(hdr->frame_control)) {
-		u8 *qc = ieee80211_get_qos_ctl(hdr);
-		tid = qc[0] & 0xf;
-	} else
-		return IWL_MAX_TID_COUNT;
-
-	if (unlikely(tid >= IWL_MAX_TID_COUNT))
-		return IWL_MAX_TID_COUNT;
-
-	tl = &lq_data->load[tid];
-
-	curr_time -= curr_time % TID_ROUND_VALUE;
-
-	/* Happens only for the first packet. Initialize the data */
-	if (!(tl->queue_count)) {
-		tl->total = 1;
-		tl->time_stamp = curr_time;
-		tl->queue_count = 1;
-		tl->head = 0;
-		tl->packet_count[0] = 1;
-		return IWL_MAX_TID_COUNT;
-	}
-
-	time_diff = TIME_WRAP_AROUND(tl->time_stamp, curr_time);
-	index = time_diff / TID_QUEUE_CELL_SPACING;
-
-	/* The history is too long: remove data that is older than */
-	/* TID_MAX_TIME_DIFF */
-	if (index >= TID_QUEUE_MAX_SIZE)
-		rs_tl_rm_old_stats(tl, curr_time);
-
-	index = (tl->head + index) % TID_QUEUE_MAX_SIZE;
-	tl->packet_count[index] = tl->packet_count[index] + 1;
-	tl->total = tl->total + 1;
-
-	if ((index + 1) > tl->queue_count)
-		tl->queue_count = index + 1;
-
-	return tid;
-}
-
-#ifdef CONFIG_MAC80211_DEBUGFS
-/**
- * Program the device to use fixed rate for frame transmit
- * This is for debugging/testing only
- * once the device start use fixed rate, we need to reload the module
- * to being back the normal operation.
- */
-static void rs_program_fix_rate(struct iwl_priv *priv,
-				struct iwl_lq_sta *lq_sta)
-{
-	struct iwl_station_priv *sta_priv =
-		container_of(lq_sta, struct iwl_station_priv, lq_sta);
-	struct iwl_rxon_context *ctx = sta_priv->ctx;
-
-	lq_sta->active_legacy_rate = 0x0FFF;	/* 1 - 54 MBits, includes CCK */
-	lq_sta->active_siso_rate   = 0x1FD0;	/* 6 - 60 MBits, no 9, no CCK */
-	lq_sta->active_mimo2_rate  = 0x1FD0;	/* 6 - 60 MBits, no 9, no CCK */
-	lq_sta->active_mimo3_rate  = 0x1FD0;	/* 6 - 60 MBits, no 9, no CCK */
-
-#ifdef CONFIG_IWLWIFI_DEVICE_TESTMODE
-	/* testmode has higher priority to overwirte the fixed rate */
-	if (priv->tm_fixed_rate)
-		lq_sta->dbg_fixed_rate = priv->tm_fixed_rate;
-#endif
-
-	IWL_DEBUG_RATE(priv, "sta_id %d rate 0x%X\n",
-		lq_sta->lq.sta_id, lq_sta->dbg_fixed_rate);
-
-	if (lq_sta->dbg_fixed_rate) {
-		rs_fill_link_cmd(NULL, lq_sta, lq_sta->dbg_fixed_rate);
-		iwl_send_lq_cmd(lq_sta->drv, ctx, &lq_sta->lq, CMD_ASYNC,
-				false);
-	}
-}
-#endif
-
-/*
-	get the traffic load value for tid
-*/
-static u32 rs_tl_get_load(struct iwl_lq_sta *lq_data, u8 tid)
-{
-	u32 curr_time = jiffies_to_msecs(jiffies);
-	u32 time_diff;
-	s32 index;
-	struct iwl_traffic_load *tl = NULL;
-
-	if (tid >= IWL_MAX_TID_COUNT)
-		return 0;
-
-	tl = &(lq_data->load[tid]);
-
-	curr_time -= curr_time % TID_ROUND_VALUE;
-
-	if (!(tl->queue_count))
-		return 0;
-
-	time_diff = TIME_WRAP_AROUND(tl->time_stamp, curr_time);
-	index = time_diff / TID_QUEUE_CELL_SPACING;
-
-	/* The history is too long: remove data that is older than */
-	/* TID_MAX_TIME_DIFF */
-	if (index >= TID_QUEUE_MAX_SIZE)
-		rs_tl_rm_old_stats(tl, curr_time);
-
-	return tl->total;
-}
-
-static int rs_tl_turn_on_agg_for_tid(struct iwl_priv *priv,
-				      struct iwl_lq_sta *lq_data, u8 tid,
-				      struct ieee80211_sta *sta)
-{
-	int ret = -EAGAIN;
-	u32 load;
-
-	/*
-	 * Don't create TX aggregation sessions when in high
-	 * BT traffic, as they would just be disrupted by BT.
-	 */
-	if (priv->bt_traffic_load >= IWL_BT_COEX_TRAFFIC_LOAD_HIGH) {
-		IWL_ERR(priv, "BT traffic (%d), no aggregation allowed\n",
-			priv->bt_traffic_load);
-		return ret;
-	}
-
-	load = rs_tl_get_load(lq_data, tid);
-
-	if ((iwlwifi_mod_params.auto_agg) || (load > IWL_AGG_LOAD_THRESHOLD)) {
-		IWL_DEBUG_HT(priv, "Starting Tx agg: STA: %pM tid: %d\n",
-				sta->addr, tid);
-		ret = ieee80211_start_tx_ba_session(sta, tid, 5000);
-		if (ret == -EAGAIN) {
-			/*
-			 * driver and mac80211 is out of sync
-			 * this might be cause by reloading firmware
-			 * stop the tx ba session here
-			 */
-			IWL_ERR(priv, "Fail start Tx agg on tid: %d\n",
-				tid);
-			ieee80211_stop_tx_ba_session(sta, tid);
-		}
-	} else {
-		IWL_DEBUG_HT(priv, "Aggregation not enabled for tid %d "
-			"because load = %u\n", tid, load);
-	}
-	return ret;
-}
-
-static void rs_tl_turn_on_agg(struct iwl_priv *priv, u8 tid,
-			      struct iwl_lq_sta *lq_data,
-			      struct ieee80211_sta *sta)
-{
-	if (tid < IWL_MAX_TID_COUNT)
-		rs_tl_turn_on_agg_for_tid(priv, lq_data, tid, sta);
-	else
-		IWL_ERR(priv, "tid exceeds max TID count: %d/%d\n",
-			tid, IWL_MAX_TID_COUNT);
-}
-
-static inline int get_num_of_ant_from_rate(u32 rate_n_flags)
-{
-	return !!(rate_n_flags & RATE_MCS_ANT_A_MSK) +
-	       !!(rate_n_flags & RATE_MCS_ANT_B_MSK) +
-	       !!(rate_n_flags & RATE_MCS_ANT_C_MSK);
-}
-
-/*
- * Static function to get the expected throughput from an iwl_scale_tbl_info
- * that wraps a NULL pointer check
- */
-static s32 get_expected_tpt(struct iwl_scale_tbl_info *tbl, int rs_index)
-{
-	if (tbl->expected_tpt)
-		return tbl->expected_tpt[rs_index];
-	return 0;
-}
-
-/**
- * rs_collect_tx_data - Update the success/failure sliding window
- *
- * We keep a sliding window of the last 62 packets transmitted
- * at this rate.  window->data contains the bitmask of successful
- * packets.
- */
-static int rs_collect_tx_data(struct iwl_scale_tbl_info *tbl,
-			      int scale_index, int attempts, int successes)
-{
-	struct iwl_rate_scale_data *window = NULL;
-	static const u64 mask = (((u64)1) << (IWL_RATE_MAX_WINDOW - 1));
-	s32 fail_count, tpt;
-
-	if (scale_index < 0 || scale_index >= IWL_RATE_COUNT)
-		return -EINVAL;
-
-	/* Select window for current tx bit rate */
-	window = &(tbl->win[scale_index]);
-
-	/* Get expected throughput */
-	tpt = get_expected_tpt(tbl, scale_index);
-
-	/*
-	 * Keep track of only the latest 62 tx frame attempts in this rate's
-	 * history window; anything older isn't really relevant any more.
-	 * If we have filled up the sliding window, drop the oldest attempt;
-	 * if the oldest attempt (highest bit in bitmap) shows "success",
-	 * subtract "1" from the success counter (this is the main reason
-	 * we keep these bitmaps!).
-	 */
-	while (attempts > 0) {
-		if (window->counter >= IWL_RATE_MAX_WINDOW) {
-
-			/* remove earliest */
-			window->counter = IWL_RATE_MAX_WINDOW - 1;
-
-			if (window->data & mask) {
-				window->data &= ~mask;
-				window->success_counter--;
-			}
-		}
-
-		/* Increment frames-attempted counter */
-		window->counter++;
-
-		/* Shift bitmap by one frame to throw away oldest history */
-		window->data <<= 1;
-
-		/* Mark the most recent #successes attempts as successful */
-		if (successes > 0) {
-			window->success_counter++;
-			window->data |= 0x1;
-			successes--;
-		}
-
-		attempts--;
-	}
-
-	/* Calculate current success ratio, avoid divide-by-0! */
-	if (window->counter > 0)
-		window->success_ratio = 128 * (100 * window->success_counter)
-					/ window->counter;
-	else
-		window->success_ratio = IWL_INVALID_VALUE;
-
-	fail_count = window->counter - window->success_counter;
-
-	/* Calculate average throughput, if we have enough history. */
-	if ((fail_count >= IWL_RATE_MIN_FAILURE_TH) ||
-	    (window->success_counter >= IWL_RATE_MIN_SUCCESS_TH))
-		window->average_tpt = (window->success_ratio * tpt + 64) / 128;
-	else
-		window->average_tpt = IWL_INVALID_VALUE;
-
-	/* Tag this window as having been updated */
-	window->stamp = jiffies;
-
-	return 0;
-}
-
-/*
- * Fill uCode API rate_n_flags field, based on "search" or "active" table.
- */
-/* FIXME:RS:remove this function and put the flags statically in the table */
-static u32 rate_n_flags_from_tbl(struct iwl_priv *priv,
-				 struct iwl_scale_tbl_info *tbl,
-				 int index, u8 use_green)
-{
-	u32 rate_n_flags = 0;
-
-	if (is_legacy(tbl->lq_type)) {
-		rate_n_flags = iwl_rates[index].plcp;
-		if (index >= IWL_FIRST_CCK_RATE && index <= IWL_LAST_CCK_RATE)
-			rate_n_flags |= RATE_MCS_CCK_MSK;
-
-	} else if (is_Ht(tbl->lq_type)) {
-		if (index > IWL_LAST_OFDM_RATE) {
-			IWL_ERR(priv, "Invalid HT rate index %d\n", index);
-			index = IWL_LAST_OFDM_RATE;
-		}
-		rate_n_flags = RATE_MCS_HT_MSK;
-
-		if (is_siso(tbl->lq_type))
-			rate_n_flags |=	iwl_rates[index].plcp_siso;
-		else if (is_mimo2(tbl->lq_type))
-			rate_n_flags |=	iwl_rates[index].plcp_mimo2;
-		else
-			rate_n_flags |=	iwl_rates[index].plcp_mimo3;
-	} else {
-		IWL_ERR(priv, "Invalid tbl->lq_type %d\n", tbl->lq_type);
-	}
-
-	rate_n_flags |= ((tbl->ant_type << RATE_MCS_ANT_POS) &
-						     RATE_MCS_ANT_ABC_MSK);
-
-	if (is_Ht(tbl->lq_type)) {
-		if (tbl->is_ht40) {
-			if (tbl->is_dup)
-				rate_n_flags |= RATE_MCS_DUP_MSK;
-			else
-				rate_n_flags |= RATE_MCS_HT40_MSK;
-		}
-		if (tbl->is_SGI)
-			rate_n_flags |= RATE_MCS_SGI_MSK;
-
-		if (use_green) {
-			rate_n_flags |= RATE_MCS_GF_MSK;
-			if (is_siso(tbl->lq_type) && tbl->is_SGI) {
-				rate_n_flags &= ~RATE_MCS_SGI_MSK;
-				IWL_ERR(priv, "GF was set with SGI:SISO\n");
-			}
-		}
-	}
-	return rate_n_flags;
-}
-
-/*
- * Interpret uCode API's rate_n_flags format,
- * fill "search" or "active" tx mode table.
- */
-static int rs_get_tbl_info_from_mcs(const u32 rate_n_flags,
-				    enum ieee80211_band band,
-				    struct iwl_scale_tbl_info *tbl,
-				    int *rate_idx)
-{
-	u32 ant_msk = (rate_n_flags & RATE_MCS_ANT_ABC_MSK);
-	u8 num_of_ant = get_num_of_ant_from_rate(rate_n_flags);
-	u8 mcs;
-
-	memset(tbl, 0, sizeof(struct iwl_scale_tbl_info));
-	*rate_idx = iwl_hwrate_to_plcp_idx(rate_n_flags);
-
-	if (*rate_idx  == IWL_RATE_INVALID) {
-		*rate_idx = -1;
-		return -EINVAL;
-	}
-	tbl->is_SGI = 0;	/* default legacy setup */
-	tbl->is_ht40 = 0;
-	tbl->is_dup = 0;
-	tbl->ant_type = (ant_msk >> RATE_MCS_ANT_POS);
-	tbl->lq_type = LQ_NONE;
-	tbl->max_search = IWL_MAX_SEARCH;
-
-	/* legacy rate format */
-	if (!(rate_n_flags & RATE_MCS_HT_MSK)) {
-		if (num_of_ant == 1) {
-			if (band == IEEE80211_BAND_5GHZ)
-				tbl->lq_type = LQ_A;
-			else
-				tbl->lq_type = LQ_G;
-		}
-	/* HT rate format */
-	} else {
-		if (rate_n_flags & RATE_MCS_SGI_MSK)
-			tbl->is_SGI = 1;
-
-		if ((rate_n_flags & RATE_MCS_HT40_MSK) ||
-		    (rate_n_flags & RATE_MCS_DUP_MSK))
-			tbl->is_ht40 = 1;
-
-		if (rate_n_flags & RATE_MCS_DUP_MSK)
-			tbl->is_dup = 1;
-
-		mcs = rs_extract_rate(rate_n_flags);
-
-		/* SISO */
-		if (mcs <= IWL_RATE_SISO_60M_PLCP) {
-			if (num_of_ant == 1)
-				tbl->lq_type = LQ_SISO; /*else NONE*/
-		/* MIMO2 */
-		} else if (mcs <= IWL_RATE_MIMO2_60M_PLCP) {
-			if (num_of_ant == 2)
-				tbl->lq_type = LQ_MIMO2;
-		/* MIMO3 */
-		} else {
-			if (num_of_ant == 3) {
-				tbl->max_search = IWL_MAX_11N_MIMO3_SEARCH;
-				tbl->lq_type = LQ_MIMO3;
-			}
-		}
-	}
-	return 0;
-}
-
-/* switch to another antenna/antennas and return 1 */
-/* if no other valid antenna found, return 0 */
-static int rs_toggle_antenna(u32 valid_ant, u32 *rate_n_flags,
-			     struct iwl_scale_tbl_info *tbl)
-{
-	u8 new_ant_type;
-
-	if (!tbl->ant_type || tbl->ant_type > ANT_ABC)
-		return 0;
-
-	if (!rs_is_valid_ant(valid_ant, tbl->ant_type))
-		return 0;
-
-	new_ant_type = ant_toggle_lookup[tbl->ant_type];
-
-	while ((new_ant_type != tbl->ant_type) &&
-	       !rs_is_valid_ant(valid_ant, new_ant_type))
-		new_ant_type = ant_toggle_lookup[new_ant_type];
-
-	if (new_ant_type == tbl->ant_type)
-		return 0;
-
-	tbl->ant_type = new_ant_type;
-	*rate_n_flags &= ~RATE_MCS_ANT_ABC_MSK;
-	*rate_n_flags |= new_ant_type << RATE_MCS_ANT_POS;
-	return 1;
-}
-
-/**
- * Green-field mode is valid if the station supports it and
- * there are no non-GF stations present in the BSS.
- */
-static bool rs_use_green(struct ieee80211_sta *sta)
-{
-	struct iwl_station_priv *sta_priv = (void *)sta->drv_priv;
-	struct iwl_rxon_context *ctx = sta_priv->ctx;
-
-	return (sta->ht_cap.cap & IEEE80211_HT_CAP_GRN_FLD) &&
-		!(ctx->ht.non_gf_sta_present);
-}
-
-/**
- * rs_get_supported_rates - get the available rates
- *
- * if management frame or broadcast frame only return
- * basic available rates.
- *
- */
-static u16 rs_get_supported_rates(struct iwl_lq_sta *lq_sta,
-				  struct ieee80211_hdr *hdr,
-				  enum iwl_table_type rate_type)
-{
-	if (is_legacy(rate_type)) {
-		return lq_sta->active_legacy_rate;
-	} else {
-		if (is_siso(rate_type))
-			return lq_sta->active_siso_rate;
-		else if (is_mimo2(rate_type))
-			return lq_sta->active_mimo2_rate;
-		else
-			return lq_sta->active_mimo3_rate;
-	}
-}
-
-static u16 rs_get_adjacent_rate(struct iwl_priv *priv, u8 index, u16 rate_mask,
-				int rate_type)
-{
-	u8 high = IWL_RATE_INVALID;
-	u8 low = IWL_RATE_INVALID;
-
-	/* 802.11A or ht walks to the next literal adjacent rate in
-	 * the rate table */
-	if (is_a_band(rate_type) || !is_legacy(rate_type)) {
-		int i;
-		u32 mask;
-
-		/* Find the previous rate that is in the rate mask */
-		i = index - 1;
-		for (mask = (1 << i); i >= 0; i--, mask >>= 1) {
-			if (rate_mask & mask) {
-				low = i;
-				break;
-			}
-		}
-
-		/* Find the next rate that is in the rate mask */
-		i = index + 1;
-		for (mask = (1 << i); i < IWL_RATE_COUNT; i++, mask <<= 1) {
-			if (rate_mask & mask) {
-				high = i;
-				break;
-			}
-		}
-
-		return (high << 8) | low;
-	}
-
-	low = index;
-	while (low != IWL_RATE_INVALID) {
-		low = iwl_rates[low].prev_rs;
-		if (low == IWL_RATE_INVALID)
-			break;
-		if (rate_mask & (1 << low))
-			break;
-		IWL_DEBUG_RATE(priv, "Skipping masked lower rate: %d\n", low);
-	}
-
-	high = index;
-	while (high != IWL_RATE_INVALID) {
-		high = iwl_rates[high].next_rs;
-		if (high == IWL_RATE_INVALID)
-			break;
-		if (rate_mask & (1 << high))
-			break;
-		IWL_DEBUG_RATE(priv, "Skipping masked higher rate: %d\n", high);
-	}
-
-	return (high << 8) | low;
-}
-
-static u32 rs_get_lower_rate(struct iwl_lq_sta *lq_sta,
-			     struct iwl_scale_tbl_info *tbl,
-			     u8 scale_index, u8 ht_possible)
-{
-	s32 low;
-	u16 rate_mask;
-	u16 high_low;
-	u8 switch_to_legacy = 0;
-	u8 is_green = lq_sta->is_green;
-	struct iwl_priv *priv = lq_sta->drv;
-
-	/* check if we need to switch from HT to legacy rates.
-	 * assumption is that mandatory rates (1Mbps or 6Mbps)
-	 * are always supported (spec demand) */
-	if (!is_legacy(tbl->lq_type) && (!ht_possible || !scale_index)) {
-		switch_to_legacy = 1;
-		scale_index = rs_ht_to_legacy[scale_index];
-		if (lq_sta->band == IEEE80211_BAND_5GHZ)
-			tbl->lq_type = LQ_A;
-		else
-			tbl->lq_type = LQ_G;
-
-		if (num_of_ant(tbl->ant_type) > 1)
-			tbl->ant_type =
-			    first_antenna(priv->hw_params.valid_tx_ant);
-
-		tbl->is_ht40 = 0;
-		tbl->is_SGI = 0;
-		tbl->max_search = IWL_MAX_SEARCH;
-	}
-
-	rate_mask = rs_get_supported_rates(lq_sta, NULL, tbl->lq_type);
-
-	/* Mask with station rate restriction */
-	if (is_legacy(tbl->lq_type)) {
-		/* supp_rates has no CCK bits in A mode */
-		if (lq_sta->band == IEEE80211_BAND_5GHZ)
-			rate_mask  = (u16)(rate_mask &
-			   (lq_sta->supp_rates << IWL_FIRST_OFDM_RATE));
-		else
-			rate_mask = (u16)(rate_mask & lq_sta->supp_rates);
-	}
-
-	/* If we switched from HT to legacy, check current rate */
-	if (switch_to_legacy && (rate_mask & (1 << scale_index))) {
-		low = scale_index;
-		goto out;
-	}
-
-	high_low = rs_get_adjacent_rate(lq_sta->drv, scale_index, rate_mask,
-					tbl->lq_type);
-	low = high_low & 0xff;
-
-	if (low == IWL_RATE_INVALID)
-		low = scale_index;
-
-out:
-	return rate_n_flags_from_tbl(lq_sta->drv, tbl, low, is_green);
-}
-
-/*
- * Simple function to compare two rate scale table types
- */
-static bool table_type_matches(struct iwl_scale_tbl_info *a,
-			       struct iwl_scale_tbl_info *b)
-{
-	return (a->lq_type == b->lq_type) && (a->ant_type == b->ant_type) &&
-		(a->is_SGI == b->is_SGI);
-}
-
-static void rs_bt_update_lq(struct iwl_priv *priv, struct iwl_rxon_context *ctx,
-			    struct iwl_lq_sta *lq_sta)
-{
-	struct iwl_scale_tbl_info *tbl;
-	bool full_concurrent = priv->bt_full_concurrent;
-
-	if (priv->bt_ant_couple_ok) {
-		/*
-		 * Is there a need to switch between
-		 * full concurrency and 3-wire?
-		 */
-		if (priv->bt_ci_compliance && priv->bt_ant_couple_ok)
-			full_concurrent = true;
-		else
-			full_concurrent = false;
-	}
-	if ((priv->bt_traffic_load != priv->last_bt_traffic_load) ||
-	    (priv->bt_full_concurrent != full_concurrent)) {
-		priv->bt_full_concurrent = full_concurrent;
-		priv->last_bt_traffic_load = priv->bt_traffic_load;
-
-		/* Update uCode's rate table. */
-		tbl = &(lq_sta->lq_info[lq_sta->active_tbl]);
-		rs_fill_link_cmd(priv, lq_sta, tbl->current_rate);
-		iwl_send_lq_cmd(priv, ctx, &lq_sta->lq, CMD_ASYNC, false);
-
-		queue_work(priv->workqueue, &priv->bt_full_concurrency);
-	}
-}
-
-/*
- * mac80211 sends us Tx status
- */
-static void rs_tx_status(void *priv_r, struct ieee80211_supported_band *sband,
-			 struct ieee80211_sta *sta, void *priv_sta,
-			 struct sk_buff *skb)
-{
-	int legacy_success;
-	int retries;
-	int rs_index, mac_index, i;
-	struct iwl_lq_sta *lq_sta = priv_sta;
-	struct iwl_link_quality_cmd *table;
-	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
-	struct iwl_op_mode *op_mode = (struct iwl_op_mode *)priv_r;
-	struct iwl_priv *priv = IWL_OP_MODE_GET_DVM(op_mode);
-	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
-	enum mac80211_rate_control_flags mac_flags;
-	u32 tx_rate;
-	struct iwl_scale_tbl_info tbl_type;
-	struct iwl_scale_tbl_info *curr_tbl, *other_tbl, *tmp_tbl;
-	struct iwl_station_priv *sta_priv = (void *)sta->drv_priv;
-	struct iwl_rxon_context *ctx = sta_priv->ctx;
-
-	IWL_DEBUG_RATE_LIMIT(priv, "get frame ack response, update rate scale window\n");
-
-	/* Treat uninitialized rate scaling data same as non-existing. */
-	if (!lq_sta) {
-		IWL_DEBUG_RATE(priv, "Station rate scaling not created yet.\n");
-		return;
-	} else if (!lq_sta->drv) {
-		IWL_DEBUG_RATE(priv, "Rate scaling not initialized yet.\n");
-		return;
-	}
-
-	if (!ieee80211_is_data(hdr->frame_control) ||
-	    info->flags & IEEE80211_TX_CTL_NO_ACK)
-		return;
-
-	/* This packet was aggregated but doesn't carry status info */
-	if ((info->flags & IEEE80211_TX_CTL_AMPDU) &&
-	    !(info->flags & IEEE80211_TX_STAT_AMPDU))
-		return;
-
-	/*
-	 * Ignore this Tx frame response if its initial rate doesn't match
-	 * that of latest Link Quality command.  There may be stragglers
-	 * from a previous Link Quality command, but we're no longer interested
-	 * in those; they're either from the "active" mode while we're trying
-	 * to check "search" mode, or a prior "search" mode after we've moved
-	 * to a new "search" mode (which might become the new "active" mode).
-	 */
-	table = &lq_sta->lq;
-	tx_rate = le32_to_cpu(table->rs_table[0].rate_n_flags);
-	rs_get_tbl_info_from_mcs(tx_rate, priv->band, &tbl_type, &rs_index);
-	if (priv->band == IEEE80211_BAND_5GHZ)
-		rs_index -= IWL_FIRST_OFDM_RATE;
-	mac_flags = info->status.rates[0].flags;
-	mac_index = info->status.rates[0].idx;
-	/* For HT packets, map MCS to PLCP */
-	if (mac_flags & IEEE80211_TX_RC_MCS) {
-		mac_index &= RATE_MCS_CODE_MSK;	/* Remove # of streams */
-		if (mac_index >= (IWL_RATE_9M_INDEX - IWL_FIRST_OFDM_RATE))
-			mac_index++;
-		/*
-		 * mac80211 HT index is always zero-indexed; we need to move
-		 * HT OFDM rates after CCK rates in 2.4 GHz band
-		 */
-		if (priv->band == IEEE80211_BAND_2GHZ)
-			mac_index += IWL_FIRST_OFDM_RATE;
-	}
-	/* Here we actually compare this rate to the latest LQ command */
-	if ((mac_index < 0) ||
-	    (tbl_type.is_SGI != !!(mac_flags & IEEE80211_TX_RC_SHORT_GI)) ||
-	    (tbl_type.is_ht40 != !!(mac_flags & IEEE80211_TX_RC_40_MHZ_WIDTH)) ||
-	    (tbl_type.is_dup != !!(mac_flags & IEEE80211_TX_RC_DUP_DATA)) ||
-	    (tbl_type.ant_type != info->status.antenna) ||
-	    (!!(tx_rate & RATE_MCS_HT_MSK) != !!(mac_flags & IEEE80211_TX_RC_MCS)) ||
-	    (!!(tx_rate & RATE_MCS_GF_MSK) != !!(mac_flags & IEEE80211_TX_RC_GREEN_FIELD)) ||
-	    (rs_index != mac_index)) {
-		IWL_DEBUG_RATE(priv, "initial rate %d does not match %d (0x%x)\n", mac_index, rs_index, tx_rate);
-		/*
-		 * Since rates mis-match, the last LQ command may have failed.
-		 * After IWL_MISSED_RATE_MAX mis-matches, resync the uCode with
-		 * ... driver.
-		 */
-		lq_sta->missed_rate_counter++;
-		if (lq_sta->missed_rate_counter > IWL_MISSED_RATE_MAX) {
-			lq_sta->missed_rate_counter = 0;
-			iwl_send_lq_cmd(priv, ctx, &lq_sta->lq, CMD_ASYNC, false);
-		}
-		/* Regardless, ignore this status info for outdated rate */
-		return;
-	} else
-		/* Rate did match, so reset the missed_rate_counter */
-		lq_sta->missed_rate_counter = 0;
-
-	/* Figure out if rate scale algorithm is in active or search table */
-	if (table_type_matches(&tbl_type,
-				&(lq_sta->lq_info[lq_sta->active_tbl]))) {
-		curr_tbl = &(lq_sta->lq_info[lq_sta->active_tbl]);
-		other_tbl = &(lq_sta->lq_info[1 - lq_sta->active_tbl]);
-	} else if (table_type_matches(&tbl_type,
-				&lq_sta->lq_info[1 - lq_sta->active_tbl])) {
-		curr_tbl = &(lq_sta->lq_info[1 - lq_sta->active_tbl]);
-		other_tbl = &(lq_sta->lq_info[lq_sta->active_tbl]);
-	} else {
-		IWL_DEBUG_RATE(priv, "Neither active nor search matches tx rate\n");
-		tmp_tbl = &(lq_sta->lq_info[lq_sta->active_tbl]);
-		IWL_DEBUG_RATE(priv, "active- lq:%x, ant:%x, SGI:%d\n",
-			tmp_tbl->lq_type, tmp_tbl->ant_type, tmp_tbl->is_SGI);
-		tmp_tbl = &(lq_sta->lq_info[1 - lq_sta->active_tbl]);
-		IWL_DEBUG_RATE(priv, "search- lq:%x, ant:%x, SGI:%d\n",
-			tmp_tbl->lq_type, tmp_tbl->ant_type, tmp_tbl->is_SGI);
-		IWL_DEBUG_RATE(priv, "actual- lq:%x, ant:%x, SGI:%d\n",
-			tbl_type.lq_type, tbl_type.ant_type, tbl_type.is_SGI);
-		/*
-		 * no matching table found, let's by-pass the data collection
-		 * and continue to perform rate scale to find the rate table
-		 */
-		rs_stay_in_table(lq_sta, true);
-		goto done;
-	}
-
-	/*
-	 * Updating the frame history depends on whether packets were
-	 * aggregated.
-	 *
-	 * For aggregation, all packets were transmitted at the same rate, the
-	 * first index into rate scale table.
-	 */
-	if (info->flags & IEEE80211_TX_STAT_AMPDU) {
-		tx_rate = le32_to_cpu(table->rs_table[0].rate_n_flags);
-		rs_get_tbl_info_from_mcs(tx_rate, priv->band, &tbl_type,
-				&rs_index);
-		rs_collect_tx_data(curr_tbl, rs_index,
-				   info->status.ampdu_len,
-				   info->status.ampdu_ack_len);
-
-		/* Update success/fail counts if not searching for new mode */
-		if (lq_sta->stay_in_tbl) {
-			lq_sta->total_success += info->status.ampdu_ack_len;
-			lq_sta->total_failed += (info->status.ampdu_len -
-					info->status.ampdu_ack_len);
-		}
-	} else {
-	/*
-	 * For legacy, update frame history with for each Tx retry.
-	 */
-		retries = info->status.rates[0].count - 1;
-		/* HW doesn't send more than 15 retries */
-		retries = min(retries, 15);
-
-		/* The last transmission may have been successful */
-		legacy_success = !!(info->flags & IEEE80211_TX_STAT_ACK);
-		/* Collect data for each rate used during failed TX attempts */
-		for (i = 0; i <= retries; ++i) {
-			tx_rate = le32_to_cpu(table->rs_table[i].rate_n_flags);
-			rs_get_tbl_info_from_mcs(tx_rate, priv->band,
-					&tbl_type, &rs_index);
-			/*
-			 * Only collect stats if retried rate is in the same RS
-			 * table as active/search.
-			 */
-			if (table_type_matches(&tbl_type, curr_tbl))
-				tmp_tbl = curr_tbl;
-			else if (table_type_matches(&tbl_type, other_tbl))
-				tmp_tbl = other_tbl;
-			else
-				continue;
-			rs_collect_tx_data(tmp_tbl, rs_index, 1,
-					   i < retries ? 0 : legacy_success);
-		}
-
-		/* Update success/fail counts if not searching for new mode */
-		if (lq_sta->stay_in_tbl) {
-			lq_sta->total_success += legacy_success;
-			lq_sta->total_failed += retries + (1 - legacy_success);
-		}
-	}
-	/* The last TX rate is cached in lq_sta; it's set in if/else above */
-	lq_sta->last_rate_n_flags = tx_rate;
-done:
-	/* See if there's a better rate or modulation mode to try. */
-	if (sta && sta->supp_rates[sband->band])
-		rs_rate_scale_perform(priv, skb, sta, lq_sta);
-
-#if defined(CONFIG_MAC80211_DEBUGFS) && defined(CONFIG_IWLWIFI_DEVICE_TESTMODE)
-	if ((priv->tm_fixed_rate) &&
-	    (priv->tm_fixed_rate != lq_sta->dbg_fixed_rate))
-		rs_program_fix_rate(priv, lq_sta);
-#endif
-	if (priv->cfg->bt_params && priv->cfg->bt_params->advanced_bt_coexist)
-		rs_bt_update_lq(priv, ctx, lq_sta);
-}
-
-/*
- * Begin a period of staying with a selected modulation mode.
- * Set "stay_in_tbl" flag to prevent any mode switches.
- * Set frame tx success limits according to legacy vs. high-throughput,
- * and reset overall (spanning all rates) tx success history statistics.
- * These control how long we stay using same modulation mode before
- * searching for a new mode.
- */
-static void rs_set_stay_in_table(struct iwl_priv *priv, u8 is_legacy,
-				 struct iwl_lq_sta *lq_sta)
-{
-	IWL_DEBUG_RATE(priv, "we are staying in the same table\n");
-	lq_sta->stay_in_tbl = 1;	/* only place this gets set */
-	if (is_legacy) {
-		lq_sta->table_count_limit = IWL_LEGACY_TABLE_COUNT;
-		lq_sta->max_failure_limit = IWL_LEGACY_FAILURE_LIMIT;
-		lq_sta->max_success_limit = IWL_LEGACY_SUCCESS_LIMIT;
-	} else {
-		lq_sta->table_count_limit = IWL_NONE_LEGACY_TABLE_COUNT;
-		lq_sta->max_failure_limit = IWL_NONE_LEGACY_FAILURE_LIMIT;
-		lq_sta->max_success_limit = IWL_NONE_LEGACY_SUCCESS_LIMIT;
-	}
-	lq_sta->table_count = 0;
-	lq_sta->total_failed = 0;
-	lq_sta->total_success = 0;
-	lq_sta->flush_timer = jiffies;
-	lq_sta->action_counter = 0;
-}
-
-/*
- * Find correct throughput table for given mode of modulation
- */
-static void rs_set_expected_tpt_table(struct iwl_lq_sta *lq_sta,
-				      struct iwl_scale_tbl_info *tbl)
-{
-	/* Used to choose among HT tables */
-	s32 (*ht_tbl_pointer)[IWL_RATE_COUNT];
-
-	/* Check for invalid LQ type */
-	if (WARN_ON_ONCE(!is_legacy(tbl->lq_type) && !is_Ht(tbl->lq_type))) {
-		tbl->expected_tpt = expected_tpt_legacy;
-		return;
-	}
-
-	/* Legacy rates have only one table */
-	if (is_legacy(tbl->lq_type)) {
-		tbl->expected_tpt = expected_tpt_legacy;
-		return;
-	}
-
-	/* Choose among many HT tables depending on number of streams
-	 * (SISO/MIMO2/MIMO3), channel width (20/40), SGI, and aggregation
-	 * status */
-	if (is_siso(tbl->lq_type) && (!tbl->is_ht40 || lq_sta->is_dup))
-		ht_tbl_pointer = expected_tpt_siso20MHz;
-	else if (is_siso(tbl->lq_type))
-		ht_tbl_pointer = expected_tpt_siso40MHz;
-	else if (is_mimo2(tbl->lq_type) && (!tbl->is_ht40 || lq_sta->is_dup))
-		ht_tbl_pointer = expected_tpt_mimo2_20MHz;
-	else if (is_mimo2(tbl->lq_type))
-		ht_tbl_pointer = expected_tpt_mimo2_40MHz;
-	else if (is_mimo3(tbl->lq_type) && (!tbl->is_ht40 || lq_sta->is_dup))
-		ht_tbl_pointer = expected_tpt_mimo3_20MHz;
-	else /* if (is_mimo3(tbl->lq_type)) <-- must be true */
-		ht_tbl_pointer = expected_tpt_mimo3_40MHz;
-
-	if (!tbl->is_SGI && !lq_sta->is_agg)		/* Normal */
-		tbl->expected_tpt = ht_tbl_pointer[0];
-	else if (tbl->is_SGI && !lq_sta->is_agg)	/* SGI */
-		tbl->expected_tpt = ht_tbl_pointer[1];
-	else if (!tbl->is_SGI && lq_sta->is_agg)	/* AGG */
-		tbl->expected_tpt = ht_tbl_pointer[2];
-	else						/* AGG+SGI */
-		tbl->expected_tpt = ht_tbl_pointer[3];
-}
-
-/*
- * Find starting rate for new "search" high-throughput mode of modulation.
- * Goal is to find lowest expected rate (under perfect conditions) that is
- * above the current measured throughput of "active" mode, to give new mode
- * a fair chance to prove itself without too many challenges.
- *
- * This gets called when transitioning to more aggressive modulation
- * (i.e. legacy to SISO or MIMO, or SISO to MIMO), as well as less aggressive
- * (i.e. MIMO to SISO).  When moving to MIMO, bit rate will typically need
- * to decrease to match "active" throughput.  When moving from MIMO to SISO,
- * bit rate will typically need to increase, but not if performance was bad.
- */
-static s32 rs_get_best_rate(struct iwl_priv *priv,
-			    struct iwl_lq_sta *lq_sta,
-			    struct iwl_scale_tbl_info *tbl,	/* "search" */
-			    u16 rate_mask, s8 index)
-{
-	/* "active" values */
-	struct iwl_scale_tbl_info *active_tbl =
-	    &(lq_sta->lq_info[lq_sta->active_tbl]);
-	s32 active_sr = active_tbl->win[index].success_ratio;
-	s32 active_tpt = active_tbl->expected_tpt[index];
-
-	/* expected "search" throughput */
-	s32 *tpt_tbl = tbl->expected_tpt;
-
-	s32 new_rate, high, low, start_hi;
-	u16 high_low;
-	s8 rate = index;
-
-	new_rate = high = low = start_hi = IWL_RATE_INVALID;
-
-	for (; ;) {
-		high_low = rs_get_adjacent_rate(priv, rate, rate_mask,
-						tbl->lq_type);
-
-		low = high_low & 0xff;
-		high = (high_low >> 8) & 0xff;
-
-		/*
-		 * Lower the "search" bit rate, to give new "search" mode
-		 * approximately the same throughput as "active" if:
-		 *
-		 * 1) "Active" mode has been working modestly well (but not
-		 *    great), and expected "search" throughput (under perfect
-		 *    conditions) at candidate rate is above the actual
-		 *    measured "active" throughput (but less than expected
-		 *    "active" throughput under perfect conditions).
-		 * OR
-		 * 2) "Active" mode has been working perfectly or very well
-		 *    and expected "search" throughput (under perfect
-		 *    conditions) at candidate rate is above expected
-		 *    "active" throughput (under perfect conditions).
-		 */
-		if ((((100 * tpt_tbl[rate]) > lq_sta->last_tpt) &&
-		     ((active_sr > IWL_RATE_DECREASE_TH) &&
-		      (active_sr <= IWL_RATE_HIGH_TH) &&
-		      (tpt_tbl[rate] <= active_tpt))) ||
-		    ((active_sr >= IWL_RATE_SCALE_SWITCH) &&
-		     (tpt_tbl[rate] > active_tpt))) {
-
-			/* (2nd or later pass)
-			 * If we've already tried to raise the rate, and are
-			 * now trying to lower it, use the higher rate. */
-			if (start_hi != IWL_RATE_INVALID) {
-				new_rate = start_hi;
-				break;
-			}
-
-			new_rate = rate;
-
-			/* Loop again with lower rate */
-			if (low != IWL_RATE_INVALID)
-				rate = low;
-
-			/* Lower rate not available, use the original */
-			else
-				break;
-
-		/* Else try to raise the "search" rate to match "active" */
-		} else {
-			/* (2nd or later pass)
-			 * If we've already tried to lower the rate, and are
-			 * now trying to raise it, use the lower rate. */
-			if (new_rate != IWL_RATE_INVALID)
-				break;
-
-			/* Loop again with higher rate */
-			else if (high != IWL_RATE_INVALID) {
-				start_hi = high;
-				rate = high;
-
-			/* Higher rate not available, use the original */
-			} else {
-				new_rate = rate;
-				break;
-			}
-		}
-	}
-
-	return new_rate;
-}
-
-/*
- * Set up search table for MIMO2
- */
-static int rs_switch_to_mimo2(struct iwl_priv *priv,
-			     struct iwl_lq_sta *lq_sta,
-			     struct ieee80211_conf *conf,
-			     struct ieee80211_sta *sta,
-			     struct iwl_scale_tbl_info *tbl, int index)
-{
-	u16 rate_mask;
-	s32 rate;
-	s8 is_green = lq_sta->is_green;
-	struct iwl_station_priv *sta_priv = (void *)sta->drv_priv;
-	struct iwl_rxon_context *ctx = sta_priv->ctx;
-
-	if (!conf_is_ht(conf) || !sta->ht_cap.ht_supported)
-		return -1;
-
-	if (((sta->ht_cap.cap & IEEE80211_HT_CAP_SM_PS) >> 2)
-						== WLAN_HT_CAP_SM_PS_STATIC)
-		return -1;
-
-	/* Need both Tx chains/antennas to support MIMO */
-	if (priv->hw_params.tx_chains_num < 2)
-		return -1;
-
-	IWL_DEBUG_RATE(priv, "LQ: try to switch to MIMO2\n");
-
-	tbl->lq_type = LQ_MIMO2;
-	tbl->is_dup = lq_sta->is_dup;
-	tbl->action = 0;
-	tbl->max_search = IWL_MAX_SEARCH;
-	rate_mask = lq_sta->active_mimo2_rate;
-
-	if (iwl_is_ht40_tx_allowed(priv, ctx, &sta->ht_cap))
-		tbl->is_ht40 = 1;
-	else
-		tbl->is_ht40 = 0;
-
-	rs_set_expected_tpt_table(lq_sta, tbl);
-
-	rate = rs_get_best_rate(priv, lq_sta, tbl, rate_mask, index);
-
-	IWL_DEBUG_RATE(priv, "LQ: MIMO2 best rate %d mask %X\n", rate, rate_mask);
-	if ((rate == IWL_RATE_INVALID) || !((1 << rate) & rate_mask)) {
-		IWL_DEBUG_RATE(priv, "Can't switch with index %d rate mask %x\n",
-						rate, rate_mask);
-		return -1;
-	}
-	tbl->current_rate = rate_n_flags_from_tbl(priv, tbl, rate, is_green);
-
-	IWL_DEBUG_RATE(priv, "LQ: Switch to new mcs %X index is green %X\n",
-		     tbl->current_rate, is_green);
-	return 0;
-}
-
-/*
- * Set up search table for MIMO3
- */
-static int rs_switch_to_mimo3(struct iwl_priv *priv,
-			     struct iwl_lq_sta *lq_sta,
-			     struct ieee80211_conf *conf,
-			     struct ieee80211_sta *sta,
-			     struct iwl_scale_tbl_info *tbl, int index)
-{
-	u16 rate_mask;
-	s32 rate;
-	s8 is_green = lq_sta->is_green;
-	struct iwl_station_priv *sta_priv = (void *)sta->drv_priv;
-	struct iwl_rxon_context *ctx = sta_priv->ctx;
-
-	if (!conf_is_ht(conf) || !sta->ht_cap.ht_supported)
-		return -1;
-
-	if (((sta->ht_cap.cap & IEEE80211_HT_CAP_SM_PS) >> 2)
-						== WLAN_HT_CAP_SM_PS_STATIC)
-		return -1;
-
-	/* Need both Tx chains/antennas to support MIMO */
-	if (priv->hw_params.tx_chains_num < 3)
-		return -1;
-
-	IWL_DEBUG_RATE(priv, "LQ: try to switch to MIMO3\n");
-
-	tbl->lq_type = LQ_MIMO3;
-	tbl->is_dup = lq_sta->is_dup;
-	tbl->action = 0;
-	tbl->max_search = IWL_MAX_11N_MIMO3_SEARCH;
-	rate_mask = lq_sta->active_mimo3_rate;
-
-	if (iwl_is_ht40_tx_allowed(priv, ctx, &sta->ht_cap))
-		tbl->is_ht40 = 1;
-	else
-		tbl->is_ht40 = 0;
-
-	rs_set_expected_tpt_table(lq_sta, tbl);
-
-	rate = rs_get_best_rate(priv, lq_sta, tbl, rate_mask, index);
-
-	IWL_DEBUG_RATE(priv, "LQ: MIMO3 best rate %d mask %X\n",
-		rate, rate_mask);
-	if ((rate == IWL_RATE_INVALID) || !((1 << rate) & rate_mask)) {
-		IWL_DEBUG_RATE(priv, "Can't switch with index %d rate mask %x\n",
-						rate, rate_mask);
-		return -1;
-	}
-	tbl->current_rate = rate_n_flags_from_tbl(priv, tbl, rate, is_green);
-
-	IWL_DEBUG_RATE(priv, "LQ: Switch to new mcs %X index is green %X\n",
-		     tbl->current_rate, is_green);
-	return 0;
-}
-
-/*
- * Set up search table for SISO
- */
-static int rs_switch_to_siso(struct iwl_priv *priv,
-			     struct iwl_lq_sta *lq_sta,
-			     struct ieee80211_conf *conf,
-			     struct ieee80211_sta *sta,
-			     struct iwl_scale_tbl_info *tbl, int index)
-{
-	u16 rate_mask;
-	u8 is_green = lq_sta->is_green;
-	s32 rate;
-	struct iwl_station_priv *sta_priv = (void *)sta->drv_priv;
-	struct iwl_rxon_context *ctx = sta_priv->ctx;
-
-	if (!conf_is_ht(conf) || !sta->ht_cap.ht_supported)
-		return -1;
-
-	IWL_DEBUG_RATE(priv, "LQ: try to switch to SISO\n");
-
-	tbl->is_dup = lq_sta->is_dup;
-	tbl->lq_type = LQ_SISO;
-	tbl->action = 0;
-	tbl->max_search = IWL_MAX_SEARCH;
-	rate_mask = lq_sta->active_siso_rate;
-
-	if (iwl_is_ht40_tx_allowed(priv, ctx, &sta->ht_cap))
-		tbl->is_ht40 = 1;
-	else
-		tbl->is_ht40 = 0;
-
-	if (is_green)
-		tbl->is_SGI = 0; /*11n spec: no SGI in SISO+Greenfield*/
-
-	rs_set_expected_tpt_table(lq_sta, tbl);
-	rate = rs_get_best_rate(priv, lq_sta, tbl, rate_mask, index);
-
-	IWL_DEBUG_RATE(priv, "LQ: get best rate %d mask %X\n", rate, rate_mask);
-	if ((rate == IWL_RATE_INVALID) || !((1 << rate) & rate_mask)) {
-		IWL_DEBUG_RATE(priv, "can not switch with index %d rate mask %x\n",
-			     rate, rate_mask);
-		return -1;
-	}
-	tbl->current_rate = rate_n_flags_from_tbl(priv, tbl, rate, is_green);
-	IWL_DEBUG_RATE(priv, "LQ: Switch to new mcs %X index is green %X\n",
-		     tbl->current_rate, is_green);
-	return 0;
-}
-
-/*
- * Try to switch to new modulation mode from legacy
- */
-static int rs_move_legacy_other(struct iwl_priv *priv,
-				struct iwl_lq_sta *lq_sta,
-				struct ieee80211_conf *conf,
-				struct ieee80211_sta *sta,
-				int index)
-{
-	struct iwl_scale_tbl_info *tbl = &(lq_sta->lq_info[lq_sta->active_tbl]);
-	struct iwl_scale_tbl_info *search_tbl =
-				&(lq_sta->lq_info[(1 - lq_sta->active_tbl)]);
-	struct iwl_rate_scale_data *window = &(tbl->win[index]);
-	u32 sz = (sizeof(struct iwl_scale_tbl_info) -
-		  (sizeof(struct iwl_rate_scale_data) * IWL_RATE_COUNT));
-	u8 start_action;
-	u8 valid_tx_ant = priv->hw_params.valid_tx_ant;
-	u8 tx_chains_num = priv->hw_params.tx_chains_num;
-	int ret = 0;
-	u8 update_search_tbl_counter = 0;
-
-	switch (priv->bt_traffic_load) {
-	case IWL_BT_COEX_TRAFFIC_LOAD_NONE:
-		/* nothing */
-		break;
-	case IWL_BT_COEX_TRAFFIC_LOAD_LOW:
-		/* avoid antenna B unless MIMO */
-		if (tbl->action == IWL_LEGACY_SWITCH_ANTENNA2)
-			tbl->action = IWL_LEGACY_SWITCH_SISO;
-		break;
-	case IWL_BT_COEX_TRAFFIC_LOAD_HIGH:
-	case IWL_BT_COEX_TRAFFIC_LOAD_CONTINUOUS:
-		/* avoid antenna B and MIMO */
-		valid_tx_ant =
-			first_antenna(priv->hw_params.valid_tx_ant);
-		if (tbl->action >= IWL_LEGACY_SWITCH_ANTENNA2 &&
-		    tbl->action != IWL_LEGACY_SWITCH_SISO)
-			tbl->action = IWL_LEGACY_SWITCH_SISO;
-		break;
-	default:
-		IWL_ERR(priv, "Invalid BT load %d", priv->bt_traffic_load);
-		break;
-	}
-
-	if (!iwl_ht_enabled(priv))
-		/* stay in Legacy */
-		tbl->action = IWL_LEGACY_SWITCH_ANTENNA1;
-	else if (iwl_tx_ant_restriction(priv) == IWL_ANT_OK_SINGLE &&
-		   tbl->action > IWL_LEGACY_SWITCH_SISO)
-		tbl->action = IWL_LEGACY_SWITCH_SISO;
-
-	/* configure as 1x1 if bt full concurrency */
-	if (priv->bt_full_concurrent) {
-		if (!iwl_ht_enabled(priv))
-			tbl->action = IWL_LEGACY_SWITCH_ANTENNA1;
-		else if (tbl->action >= IWL_LEGACY_SWITCH_ANTENNA2)
-			tbl->action = IWL_LEGACY_SWITCH_SISO;
-		valid_tx_ant =
-			first_antenna(priv->hw_params.valid_tx_ant);
-	}
-
-	start_action = tbl->action;
-	for (; ;) {
-		lq_sta->action_counter++;
-		switch (tbl->action) {
-		case IWL_LEGACY_SWITCH_ANTENNA1:
-		case IWL_LEGACY_SWITCH_ANTENNA2:
-			IWL_DEBUG_RATE(priv, "LQ: Legacy toggle Antenna\n");
-
-			if ((tbl->action == IWL_LEGACY_SWITCH_ANTENNA1 &&
-							tx_chains_num <= 1) ||
-			    (tbl->action == IWL_LEGACY_SWITCH_ANTENNA2 &&
-							tx_chains_num <= 2))
-				break;
-
-			/* Don't change antenna if success has been great */
-			if (window->success_ratio >= IWL_RS_GOOD_RATIO &&
-			    !priv->bt_full_concurrent &&
-			    priv->bt_traffic_load ==
-					IWL_BT_COEX_TRAFFIC_LOAD_NONE)
-				break;
-
-			/* Set up search table to try other antenna */
-			memcpy(search_tbl, tbl, sz);
-
-			if (rs_toggle_antenna(valid_tx_ant,
-				&search_tbl->current_rate, search_tbl)) {
-				update_search_tbl_counter = 1;
-				rs_set_expected_tpt_table(lq_sta, search_tbl);
-				goto out;
-			}
-			break;
-		case IWL_LEGACY_SWITCH_SISO:
-			IWL_DEBUG_RATE(priv, "LQ: Legacy switch to SISO\n");
-
-			/* Set up search table to try SISO */
-			memcpy(search_tbl, tbl, sz);
-			search_tbl->is_SGI = 0;
-			ret = rs_switch_to_siso(priv, lq_sta, conf, sta,
-						 search_tbl, index);
-			if (!ret) {
-				lq_sta->action_counter = 0;
-				goto out;
-			}
-
-			break;
-		case IWL_LEGACY_SWITCH_MIMO2_AB:
-		case IWL_LEGACY_SWITCH_MIMO2_AC:
-		case IWL_LEGACY_SWITCH_MIMO2_BC:
-			IWL_DEBUG_RATE(priv, "LQ: Legacy switch to MIMO2\n");
-
-			/* Set up search table to try MIMO */
-			memcpy(search_tbl, tbl, sz);
-			search_tbl->is_SGI = 0;
-
-			if (tbl->action == IWL_LEGACY_SWITCH_MIMO2_AB)
-				search_tbl->ant_type = ANT_AB;
-			else if (tbl->action == IWL_LEGACY_SWITCH_MIMO2_AC)
-				search_tbl->ant_type = ANT_AC;
-			else
-				search_tbl->ant_type = ANT_BC;
-
-			if (!rs_is_valid_ant(valid_tx_ant, search_tbl->ant_type))
-				break;
-
-			ret = rs_switch_to_mimo2(priv, lq_sta, conf, sta,
-						 search_tbl, index);
-			if (!ret) {
-				lq_sta->action_counter = 0;
-				goto out;
-			}
-			break;
-
-		case IWL_LEGACY_SWITCH_MIMO3_ABC:
-			IWL_DEBUG_RATE(priv, "LQ: Legacy switch to MIMO3\n");
-
-			/* Set up search table to try MIMO3 */
-			memcpy(search_tbl, tbl, sz);
-			search_tbl->is_SGI = 0;
-
-			search_tbl->ant_type = ANT_ABC;
-
-			if (!rs_is_valid_ant(valid_tx_ant, search_tbl->ant_type))
-				break;
-
-			ret = rs_switch_to_mimo3(priv, lq_sta, conf, sta,
-						 search_tbl, index);
-			if (!ret) {
-				lq_sta->action_counter = 0;
-				goto out;
-			}
-			break;
-		}
-		tbl->action++;
-		if (tbl->action > IWL_LEGACY_SWITCH_MIMO3_ABC)
-			tbl->action = IWL_LEGACY_SWITCH_ANTENNA1;
-
-		if (tbl->action == start_action)
-			break;
-
-	}
-	search_tbl->lq_type = LQ_NONE;
-	return 0;
-
-out:
-	lq_sta->search_better_tbl = 1;
-	tbl->action++;
-	if (tbl->action > IWL_LEGACY_SWITCH_MIMO3_ABC)
-		tbl->action = IWL_LEGACY_SWITCH_ANTENNA1;
-	if (update_search_tbl_counter)
-		search_tbl->action = tbl->action;
-	return 0;
-
-}
-
-/*
- * Try to switch to new modulation mode from SISO
- */
-static int rs_move_siso_to_other(struct iwl_priv *priv,
-				 struct iwl_lq_sta *lq_sta,
-				 struct ieee80211_conf *conf,
-				 struct ieee80211_sta *sta, int index)
-{
-	u8 is_green = lq_sta->is_green;
-	struct iwl_scale_tbl_info *tbl = &(lq_sta->lq_info[lq_sta->active_tbl]);
-	struct iwl_scale_tbl_info *search_tbl =
-				&(lq_sta->lq_info[(1 - lq_sta->active_tbl)]);
-	struct iwl_rate_scale_data *window = &(tbl->win[index]);
-	struct ieee80211_sta_ht_cap *ht_cap = &sta->ht_cap;
-	u32 sz = (sizeof(struct iwl_scale_tbl_info) -
-		  (sizeof(struct iwl_rate_scale_data) * IWL_RATE_COUNT));
-	u8 start_action;
-	u8 valid_tx_ant = priv->hw_params.valid_tx_ant;
-	u8 tx_chains_num = priv->hw_params.tx_chains_num;
-	u8 update_search_tbl_counter = 0;
-	int ret;
-
-	switch (priv->bt_traffic_load) {
-	case IWL_BT_COEX_TRAFFIC_LOAD_NONE:
-		/* nothing */
-		break;
-	case IWL_BT_COEX_TRAFFIC_LOAD_LOW:
-		/* avoid antenna B unless MIMO */
-		if (tbl->action == IWL_SISO_SWITCH_ANTENNA2)
-			tbl->action = IWL_SISO_SWITCH_MIMO2_AB;
-		break;
-	case IWL_BT_COEX_TRAFFIC_LOAD_HIGH:
-	case IWL_BT_COEX_TRAFFIC_LOAD_CONTINUOUS:
-		/* avoid antenna B and MIMO */
-		valid_tx_ant =
-			first_antenna(priv->hw_params.valid_tx_ant);
-		if (tbl->action != IWL_SISO_SWITCH_ANTENNA1)
-			tbl->action = IWL_SISO_SWITCH_ANTENNA1;
-		break;
-	default:
-		IWL_ERR(priv, "Invalid BT load %d", priv->bt_traffic_load);
-		break;
-	}
-
-	if (iwl_tx_ant_restriction(priv) == IWL_ANT_OK_SINGLE &&
-	    tbl->action > IWL_SISO_SWITCH_ANTENNA2) {
-		/* stay in SISO */
-		tbl->action = IWL_SISO_SWITCH_ANTENNA1;
-	}
-
-	/* configure as 1x1 if bt full concurrency */
-	if (priv->bt_full_concurrent) {
-		valid_tx_ant =
-			first_antenna(priv->hw_params.valid_tx_ant);
-		if (tbl->action >= IWL_LEGACY_SWITCH_ANTENNA2)
-			tbl->action = IWL_SISO_SWITCH_ANTENNA1;
-	}
-
-	start_action = tbl->action;
-	for (;;) {
-		lq_sta->action_counter++;
-		switch (tbl->action) {
-		case IWL_SISO_SWITCH_ANTENNA1:
-		case IWL_SISO_SWITCH_ANTENNA2:
-			IWL_DEBUG_RATE(priv, "LQ: SISO toggle Antenna\n");
-			if ((tbl->action == IWL_SISO_SWITCH_ANTENNA1 &&
-						tx_chains_num <= 1) ||
-			    (tbl->action == IWL_SISO_SWITCH_ANTENNA2 &&
-						tx_chains_num <= 2))
-				break;
-
-			if (window->success_ratio >= IWL_RS_GOOD_RATIO &&
-			    !priv->bt_full_concurrent &&
-			    priv->bt_traffic_load ==
-					IWL_BT_COEX_TRAFFIC_LOAD_NONE)
-				break;
-
-			memcpy(search_tbl, tbl, sz);
-			if (rs_toggle_antenna(valid_tx_ant,
-				       &search_tbl->current_rate, search_tbl)) {
-				update_search_tbl_counter = 1;
-				goto out;
-			}
-			break;
-		case IWL_SISO_SWITCH_MIMO2_AB:
-		case IWL_SISO_SWITCH_MIMO2_AC:
-		case IWL_SISO_SWITCH_MIMO2_BC:
-			IWL_DEBUG_RATE(priv, "LQ: SISO switch to MIMO2\n");
-			memcpy(search_tbl, tbl, sz);
-			search_tbl->is_SGI = 0;
-
-			if (tbl->action == IWL_SISO_SWITCH_MIMO2_AB)
-				search_tbl->ant_type = ANT_AB;
-			else if (tbl->action == IWL_SISO_SWITCH_MIMO2_AC)
-				search_tbl->ant_type = ANT_AC;
-			else
-				search_tbl->ant_type = ANT_BC;
-
-			if (!rs_is_valid_ant(valid_tx_ant, search_tbl->ant_type))
-				break;
-
-			ret = rs_switch_to_mimo2(priv, lq_sta, conf, sta,
-						 search_tbl, index);
-			if (!ret)
-				goto out;
-			break;
-		case IWL_SISO_SWITCH_GI:
-			if (!tbl->is_ht40 && !(ht_cap->cap &
-						IEEE80211_HT_CAP_SGI_20))
-				break;
-			if (tbl->is_ht40 && !(ht_cap->cap &
-						IEEE80211_HT_CAP_SGI_40))
-				break;
-
-			IWL_DEBUG_RATE(priv, "LQ: SISO toggle SGI/NGI\n");
-
-			memcpy(search_tbl, tbl, sz);
-			if (is_green) {
-				if (!tbl->is_SGI)
-					break;
-				else
-					IWL_ERR(priv,
-						"SGI was set in GF+SISO\n");
-			}
-			search_tbl->is_SGI = !tbl->is_SGI;
-			rs_set_expected_tpt_table(lq_sta, search_tbl);
-			if (tbl->is_SGI) {
-				s32 tpt = lq_sta->last_tpt / 100;
-				if (tpt >= search_tbl->expected_tpt[index])
-					break;
-			}
-			search_tbl->current_rate =
-				rate_n_flags_from_tbl(priv, search_tbl,
-						      index, is_green);
-			update_search_tbl_counter = 1;
-			goto out;
-		case IWL_SISO_SWITCH_MIMO3_ABC:
-			IWL_DEBUG_RATE(priv, "LQ: SISO switch to MIMO3\n");
-			memcpy(search_tbl, tbl, sz);
-			search_tbl->is_SGI = 0;
-			search_tbl->ant_type = ANT_ABC;
-
-			if (!rs_is_valid_ant(valid_tx_ant, search_tbl->ant_type))
-				break;
-
-			ret = rs_switch_to_mimo3(priv, lq_sta, conf, sta,
-						 search_tbl, index);
-			if (!ret)
-				goto out;
-			break;
-		}
-		tbl->action++;
-		if (tbl->action > IWL_LEGACY_SWITCH_MIMO3_ABC)
-			tbl->action = IWL_SISO_SWITCH_ANTENNA1;
-
-		if (tbl->action == start_action)
-			break;
-	}
-	search_tbl->lq_type = LQ_NONE;
-	return 0;
-
- out:
-	lq_sta->search_better_tbl = 1;
-	tbl->action++;
-	if (tbl->action > IWL_SISO_SWITCH_MIMO3_ABC)
-		tbl->action = IWL_SISO_SWITCH_ANTENNA1;
-	if (update_search_tbl_counter)
-		search_tbl->action = tbl->action;
-
-	return 0;
-}
-
-/*
- * Try to switch to new modulation mode from MIMO2
- */
-static int rs_move_mimo2_to_other(struct iwl_priv *priv,
-				 struct iwl_lq_sta *lq_sta,
-				 struct ieee80211_conf *conf,
-				 struct ieee80211_sta *sta, int index)
-{
-	s8 is_green = lq_sta->is_green;
-	struct iwl_scale_tbl_info *tbl = &(lq_sta->lq_info[lq_sta->active_tbl]);
-	struct iwl_scale_tbl_info *search_tbl =
-				&(lq_sta->lq_info[(1 - lq_sta->active_tbl)]);
-	struct iwl_rate_scale_data *window = &(tbl->win[index]);
-	struct ieee80211_sta_ht_cap *ht_cap = &sta->ht_cap;
-	u32 sz = (sizeof(struct iwl_scale_tbl_info) -
-		  (sizeof(struct iwl_rate_scale_data) * IWL_RATE_COUNT));
-	u8 start_action;
-	u8 valid_tx_ant = priv->hw_params.valid_tx_ant;
-	u8 tx_chains_num = priv->hw_params.tx_chains_num;
-	u8 update_search_tbl_counter = 0;
-	int ret;
-
-	switch (priv->bt_traffic_load) {
-	case IWL_BT_COEX_TRAFFIC_LOAD_NONE:
-		/* nothing */
-		break;
-	case IWL_BT_COEX_TRAFFIC_LOAD_HIGH:
-	case IWL_BT_COEX_TRAFFIC_LOAD_CONTINUOUS:
-		/* avoid antenna B and MIMO */
-		if (tbl->action != IWL_MIMO2_SWITCH_SISO_A)
-			tbl->action = IWL_MIMO2_SWITCH_SISO_A;
-		break;
-	case IWL_BT_COEX_TRAFFIC_LOAD_LOW:
-		/* avoid antenna B unless MIMO */
-		if (tbl->action == IWL_MIMO2_SWITCH_SISO_B ||
-		    tbl->action == IWL_MIMO2_SWITCH_SISO_C)
-			tbl->action = IWL_MIMO2_SWITCH_SISO_A;
-		break;
-	default:
-		IWL_ERR(priv, "Invalid BT load %d", priv->bt_traffic_load);
-		break;
-	}
-
-	if ((iwl_tx_ant_restriction(priv) == IWL_ANT_OK_SINGLE) &&
-	    (tbl->action < IWL_MIMO2_SWITCH_SISO_A ||
-	     tbl->action > IWL_MIMO2_SWITCH_SISO_C)) {
-		/* switch in SISO */
-		tbl->action = IWL_MIMO2_SWITCH_SISO_A;
-	}
-
-	/* configure as 1x1 if bt full concurrency */
-	if (priv->bt_full_concurrent &&
-	    (tbl->action < IWL_MIMO2_SWITCH_SISO_A ||
-	     tbl->action > IWL_MIMO2_SWITCH_SISO_C))
-		tbl->action = IWL_MIMO2_SWITCH_SISO_A;
-
-	start_action = tbl->action;
-	for (;;) {
-		lq_sta->action_counter++;
-		switch (tbl->action) {
-		case IWL_MIMO2_SWITCH_ANTENNA1:
-		case IWL_MIMO2_SWITCH_ANTENNA2:
-			IWL_DEBUG_RATE(priv, "LQ: MIMO2 toggle Antennas\n");
-
-			if (tx_chains_num <= 2)
-				break;
-
-			if (window->success_ratio >= IWL_RS_GOOD_RATIO)
-				break;
-
-			memcpy(search_tbl, tbl, sz);
-			if (rs_toggle_antenna(valid_tx_ant,
-				       &search_tbl->current_rate, search_tbl)) {
-				update_search_tbl_counter = 1;
-				goto out;
-			}
-			break;
-		case IWL_MIMO2_SWITCH_SISO_A:
-		case IWL_MIMO2_SWITCH_SISO_B:
-		case IWL_MIMO2_SWITCH_SISO_C:
-			IWL_DEBUG_RATE(priv, "LQ: MIMO2 switch to SISO\n");
-
-			/* Set up new search table for SISO */
-			memcpy(search_tbl, tbl, sz);
-
-			if (tbl->action == IWL_MIMO2_SWITCH_SISO_A)
-				search_tbl->ant_type = ANT_A;
-			else if (tbl->action == IWL_MIMO2_SWITCH_SISO_B)
-				search_tbl->ant_type = ANT_B;
-			else
-				search_tbl->ant_type = ANT_C;
-
-			if (!rs_is_valid_ant(valid_tx_ant, search_tbl->ant_type))
-				break;
-
-			ret = rs_switch_to_siso(priv, lq_sta, conf, sta,
-						 search_tbl, index);
-			if (!ret)
-				goto out;
-
-			break;
-
-		case IWL_MIMO2_SWITCH_GI:
-			if (!tbl->is_ht40 && !(ht_cap->cap &
-						IEEE80211_HT_CAP_SGI_20))
-				break;
-			if (tbl->is_ht40 && !(ht_cap->cap &
-						IEEE80211_HT_CAP_SGI_40))
-				break;
-
-			IWL_DEBUG_RATE(priv, "LQ: MIMO2 toggle SGI/NGI\n");
-
-			/* Set up new search table for MIMO2 */
-			memcpy(search_tbl, tbl, sz);
-			search_tbl->is_SGI = !tbl->is_SGI;
-			rs_set_expected_tpt_table(lq_sta, search_tbl);
-			/*
-			 * If active table already uses the fastest possible
-			 * modulation (dual stream with short guard interval),
-			 * and it's working well, there's no need to look
-			 * for a better type of modulation!
-			 */
-			if (tbl->is_SGI) {
-				s32 tpt = lq_sta->last_tpt / 100;
-				if (tpt >= search_tbl->expected_tpt[index])
-					break;
-			}
-			search_tbl->current_rate =
-				rate_n_flags_from_tbl(priv, search_tbl,
-						      index, is_green);
-			update_search_tbl_counter = 1;
-			goto out;
-
-		case IWL_MIMO2_SWITCH_MIMO3_ABC:
-			IWL_DEBUG_RATE(priv, "LQ: MIMO2 switch to MIMO3\n");
-			memcpy(search_tbl, tbl, sz);
-			search_tbl->is_SGI = 0;
-			search_tbl->ant_type = ANT_ABC;
-
-			if (!rs_is_valid_ant(valid_tx_ant, search_tbl->ant_type))
-				break;
-
-			ret = rs_switch_to_mimo3(priv, lq_sta, conf, sta,
-						 search_tbl, index);
-			if (!ret)
-				goto out;
-
-			break;
-		}
-		tbl->action++;
-		if (tbl->action > IWL_MIMO2_SWITCH_MIMO3_ABC)
-			tbl->action = IWL_MIMO2_SWITCH_ANTENNA1;
-
-		if (tbl->action == start_action)
-			break;
-	}
-	search_tbl->lq_type = LQ_NONE;
-	return 0;
- out:
-	lq_sta->search_better_tbl = 1;
-	tbl->action++;
-	if (tbl->action > IWL_MIMO2_SWITCH_MIMO3_ABC)
-		tbl->action = IWL_MIMO2_SWITCH_ANTENNA1;
-	if (update_search_tbl_counter)
-		search_tbl->action = tbl->action;
-
-	return 0;
-
-}
-
-/*
- * Try to switch to new modulation mode from MIMO3
- */
-static int rs_move_mimo3_to_other(struct iwl_priv *priv,
-				 struct iwl_lq_sta *lq_sta,
-				 struct ieee80211_conf *conf,
-				 struct ieee80211_sta *sta, int index)
-{
-	s8 is_green = lq_sta->is_green;
-	struct iwl_scale_tbl_info *tbl = &(lq_sta->lq_info[lq_sta->active_tbl]);
-	struct iwl_scale_tbl_info *search_tbl =
-				&(lq_sta->lq_info[(1 - lq_sta->active_tbl)]);
-	struct iwl_rate_scale_data *window = &(tbl->win[index]);
-	struct ieee80211_sta_ht_cap *ht_cap = &sta->ht_cap;
-	u32 sz = (sizeof(struct iwl_scale_tbl_info) -
-		  (sizeof(struct iwl_rate_scale_data) * IWL_RATE_COUNT));
-	u8 start_action;
-	u8 valid_tx_ant = priv->hw_params.valid_tx_ant;
-	u8 tx_chains_num = priv->hw_params.tx_chains_num;
-	int ret;
-	u8 update_search_tbl_counter = 0;
-
-	switch (priv->bt_traffic_load) {
-	case IWL_BT_COEX_TRAFFIC_LOAD_NONE:
-		/* nothing */
-		break;
-	case IWL_BT_COEX_TRAFFIC_LOAD_HIGH:
-	case IWL_BT_COEX_TRAFFIC_LOAD_CONTINUOUS:
-		/* avoid antenna B and MIMO */
-		if (tbl->action != IWL_MIMO3_SWITCH_SISO_A)
-			tbl->action = IWL_MIMO3_SWITCH_SISO_A;
-		break;
-	case IWL_BT_COEX_TRAFFIC_LOAD_LOW:
-		/* avoid antenna B unless MIMO */
-		if (tbl->action == IWL_MIMO3_SWITCH_SISO_B ||
-		    tbl->action == IWL_MIMO3_SWITCH_SISO_C)
-			tbl->action = IWL_MIMO3_SWITCH_SISO_A;
-		break;
-	default:
-		IWL_ERR(priv, "Invalid BT load %d", priv->bt_traffic_load);
-		break;
-	}
-
-	if ((iwl_tx_ant_restriction(priv) == IWL_ANT_OK_SINGLE) &&
-	    (tbl->action < IWL_MIMO3_SWITCH_SISO_A ||
-	     tbl->action > IWL_MIMO3_SWITCH_SISO_C)) {
-		/* switch in SISO */
-		tbl->action = IWL_MIMO3_SWITCH_SISO_A;
-	}
-
-	/* configure as 1x1 if bt full concurrency */
-	if (priv->bt_full_concurrent &&
-	    (tbl->action < IWL_MIMO3_SWITCH_SISO_A ||
-	     tbl->action > IWL_MIMO3_SWITCH_SISO_C))
-		tbl->action = IWL_MIMO3_SWITCH_SISO_A;
-
-	start_action = tbl->action;
-	for (;;) {
-		lq_sta->action_counter++;
-		switch (tbl->action) {
-		case IWL_MIMO3_SWITCH_ANTENNA1:
-		case IWL_MIMO3_SWITCH_ANTENNA2:
-			IWL_DEBUG_RATE(priv, "LQ: MIMO3 toggle Antennas\n");
-
-			if (tx_chains_num <= 3)
-				break;
-
-			if (window->success_ratio >= IWL_RS_GOOD_RATIO)
-				break;
-
-			memcpy(search_tbl, tbl, sz);
-			if (rs_toggle_antenna(valid_tx_ant,
-				       &search_tbl->current_rate, search_tbl))
-				goto out;
-			break;
-		case IWL_MIMO3_SWITCH_SISO_A:
-		case IWL_MIMO3_SWITCH_SISO_B:
-		case IWL_MIMO3_SWITCH_SISO_C:
-			IWL_DEBUG_RATE(priv, "LQ: MIMO3 switch to SISO\n");
-
-			/* Set up new search table for SISO */
-			memcpy(search_tbl, tbl, sz);
-
-			if (tbl->action == IWL_MIMO3_SWITCH_SISO_A)
-				search_tbl->ant_type = ANT_A;
-			else if (tbl->action == IWL_MIMO3_SWITCH_SISO_B)
-				search_tbl->ant_type = ANT_B;
-			else
-				search_tbl->ant_type = ANT_C;
-
-			if (!rs_is_valid_ant(valid_tx_ant, search_tbl->ant_type))
-				break;
-
-			ret = rs_switch_to_siso(priv, lq_sta, conf, sta,
-						 search_tbl, index);
-			if (!ret)
-				goto out;
-
-			break;
-
-		case IWL_MIMO3_SWITCH_MIMO2_AB:
-		case IWL_MIMO3_SWITCH_MIMO2_AC:
-		case IWL_MIMO3_SWITCH_MIMO2_BC:
-			IWL_DEBUG_RATE(priv, "LQ: MIMO3 switch to MIMO2\n");
-
-			memcpy(search_tbl, tbl, sz);
-			search_tbl->is_SGI = 0;
-			if (tbl->action == IWL_MIMO3_SWITCH_MIMO2_AB)
-				search_tbl->ant_type = ANT_AB;
-			else if (tbl->action == IWL_MIMO3_SWITCH_MIMO2_AC)
-				search_tbl->ant_type = ANT_AC;
-			else
-				search_tbl->ant_type = ANT_BC;
-
-			if (!rs_is_valid_ant(valid_tx_ant, search_tbl->ant_type))
-				break;
-
-			ret = rs_switch_to_mimo2(priv, lq_sta, conf, sta,
-						 search_tbl, index);
-			if (!ret)
-				goto out;
-
-			break;
-
-		case IWL_MIMO3_SWITCH_GI:
-			if (!tbl->is_ht40 && !(ht_cap->cap &
-						IEEE80211_HT_CAP_SGI_20))
-				break;
-			if (tbl->is_ht40 && !(ht_cap->cap &
-						IEEE80211_HT_CAP_SGI_40))
-				break;
-
-			IWL_DEBUG_RATE(priv, "LQ: MIMO3 toggle SGI/NGI\n");
-
-			/* Set up new search table for MIMO */
-			memcpy(search_tbl, tbl, sz);
-			search_tbl->is_SGI = !tbl->is_SGI;
-			rs_set_expected_tpt_table(lq_sta, search_tbl);
-			/*
-			 * If active table already uses the fastest possible
-			 * modulation (dual stream with short guard interval),
-			 * and it's working well, there's no need to look
-			 * for a better type of modulation!
-			 */
-			if (tbl->is_SGI) {
-				s32 tpt = lq_sta->last_tpt / 100;
-				if (tpt >= search_tbl->expected_tpt[index])
-					break;
-			}
-			search_tbl->current_rate =
-				rate_n_flags_from_tbl(priv, search_tbl,
-						      index, is_green);
-			update_search_tbl_counter = 1;
-			goto out;
-		}
-		tbl->action++;
-		if (tbl->action > IWL_MIMO3_SWITCH_GI)
-			tbl->action = IWL_MIMO3_SWITCH_ANTENNA1;
-
-		if (tbl->action == start_action)
-			break;
-	}
-	search_tbl->lq_type = LQ_NONE;
-	return 0;
- out:
-	lq_sta->search_better_tbl = 1;
-	tbl->action++;
-	if (tbl->action > IWL_MIMO3_SWITCH_GI)
-		tbl->action = IWL_MIMO3_SWITCH_ANTENNA1;
-	if (update_search_tbl_counter)
-		search_tbl->action = tbl->action;
-
-	return 0;
-
-}
-
-/*
- * Check whether we should continue using same modulation mode, or
- * begin search for a new mode, based on:
- * 1) # tx successes or failures while using this mode
- * 2) # times calling this function
- * 3) elapsed time in this mode (not used, for now)
- */
-static void rs_stay_in_table(struct iwl_lq_sta *lq_sta, bool force_search)
-{
-	struct iwl_scale_tbl_info *tbl;
-	int i;
-	int active_tbl;
-	int flush_interval_passed = 0;
-	struct iwl_priv *priv;
-
-	priv = lq_sta->drv;
-	active_tbl = lq_sta->active_tbl;
-
-	tbl = &(lq_sta->lq_info[active_tbl]);
-
-	/* If we've been disallowing search, see if we should now allow it */
-	if (lq_sta->stay_in_tbl) {
-
-		/* Elapsed time using current modulation mode */
-		if (lq_sta->flush_timer)
-			flush_interval_passed =
-			time_after(jiffies,
-					(unsigned long)(lq_sta->flush_timer +
-					IWL_RATE_SCALE_FLUSH_INTVL));
-
-		/*
-		 * Check if we should allow search for new modulation mode.
-		 * If many frames have failed or succeeded, or we've used
-		 * this same modulation for a long time, allow search, and
-		 * reset history stats that keep track of whether we should
-		 * allow a new search.  Also (below) reset all bitmaps and
-		 * stats in active history.
-		 */
-		if (force_search ||
-		    (lq_sta->total_failed > lq_sta->max_failure_limit) ||
-		    (lq_sta->total_success > lq_sta->max_success_limit) ||
-		    ((!lq_sta->search_better_tbl) && (lq_sta->flush_timer)
-		     && (flush_interval_passed))) {
-			IWL_DEBUG_RATE(priv, "LQ: stay is expired %d %d %d\n",
-				     lq_sta->total_failed,
-				     lq_sta->total_success,
-				     flush_interval_passed);
-
-			/* Allow search for new mode */
-			lq_sta->stay_in_tbl = 0;	/* only place reset */
-			lq_sta->total_failed = 0;
-			lq_sta->total_success = 0;
-			lq_sta->flush_timer = 0;
-
-		/*
-		 * Else if we've used this modulation mode enough repetitions
-		 * (regardless of elapsed time or success/failure), reset
-		 * history bitmaps and rate-specific stats for all rates in
-		 * active table.
-		 */
-		} else {
-			lq_sta->table_count++;
-			if (lq_sta->table_count >=
-			    lq_sta->table_count_limit) {
-				lq_sta->table_count = 0;
-
-				IWL_DEBUG_RATE(priv, "LQ: stay in table clear win\n");
-				for (i = 0; i < IWL_RATE_COUNT; i++)
-					rs_rate_scale_clear_window(
-						&(tbl->win[i]));
-			}
-		}
-
-		/* If transitioning to allow "search", reset all history
-		 * bitmaps and stats in active table (this will become the new
-		 * "search" table). */
-		if (!lq_sta->stay_in_tbl) {
-			for (i = 0; i < IWL_RATE_COUNT; i++)
-				rs_rate_scale_clear_window(&(tbl->win[i]));
-		}
-	}
-}
-
-/*
- * setup rate table in uCode
- */
-static void rs_update_rate_tbl(struct iwl_priv *priv,
-			       struct iwl_rxon_context *ctx,
-			       struct iwl_lq_sta *lq_sta,
-			       struct iwl_scale_tbl_info *tbl,
-			       int index, u8 is_green)
-{
-	u32 rate;
-
-	/* Update uCode's rate table. */
-	rate = rate_n_flags_from_tbl(priv, tbl, index, is_green);
-	rs_fill_link_cmd(priv, lq_sta, rate);
-	iwl_send_lq_cmd(priv, ctx, &lq_sta->lq, CMD_ASYNC, false);
-}
-
-/*
- * Do rate scaling and search for new modulation mode.
- */
-static void rs_rate_scale_perform(struct iwl_priv *priv,
-				  struct sk_buff *skb,
-				  struct ieee80211_sta *sta,
-				  struct iwl_lq_sta *lq_sta)
-{
-	struct ieee80211_hw *hw = priv->hw;
-	struct ieee80211_conf *conf = &hw->conf;
-	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
-	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
-	int low = IWL_RATE_INVALID;
-	int high = IWL_RATE_INVALID;
-	int index;
-	int i;
-	struct iwl_rate_scale_data *window = NULL;
-	int current_tpt = IWL_INVALID_VALUE;
-	int low_tpt = IWL_INVALID_VALUE;
-	int high_tpt = IWL_INVALID_VALUE;
-	u32 fail_count;
-	s8 scale_action = 0;
-	u16 rate_mask;
-	u8 update_lq = 0;
-	struct iwl_scale_tbl_info *tbl, *tbl1;
-	u16 rate_scale_index_msk = 0;
-	u8 is_green = 0;
-	u8 active_tbl = 0;
-	u8 done_search = 0;
-	u16 high_low;
-	s32 sr;
-	u8 tid = IWL_MAX_TID_COUNT;
-	struct iwl_tid_data *tid_data;
-	struct iwl_station_priv *sta_priv = (void *)sta->drv_priv;
-	struct iwl_rxon_context *ctx = sta_priv->ctx;
-
-	IWL_DEBUG_RATE(priv, "rate scale calculate new rate for skb\n");
-
-	/* Send management frames and NO_ACK data using lowest rate. */
-	/* TODO: this could probably be improved.. */
-	if (!ieee80211_is_data(hdr->frame_control) ||
-	    info->flags & IEEE80211_TX_CTL_NO_ACK)
-		return;
-
-	lq_sta->supp_rates = sta->supp_rates[lq_sta->band];
-
-	tid = rs_tl_add_packet(lq_sta, hdr);
-	if ((tid != IWL_MAX_TID_COUNT) &&
-	    (lq_sta->tx_agg_tid_en & (1 << tid))) {
-		tid_data = &priv->tid_data[lq_sta->lq.sta_id][tid];
-		if (tid_data->agg.state == IWL_AGG_OFF)
-			lq_sta->is_agg = 0;
-		else
-			lq_sta->is_agg = 1;
-	} else
-		lq_sta->is_agg = 0;
-
-	/*
-	 * Select rate-scale / modulation-mode table to work with in
-	 * the rest of this function:  "search" if searching for better
-	 * modulation mode, or "active" if doing rate scaling within a mode.
-	 */
-	if (!lq_sta->search_better_tbl)
-		active_tbl = lq_sta->active_tbl;
-	else
-		active_tbl = 1 - lq_sta->active_tbl;
-
-	tbl = &(lq_sta->lq_info[active_tbl]);
-	if (is_legacy(tbl->lq_type))
-		lq_sta->is_green = 0;
-	else
-		lq_sta->is_green = rs_use_green(sta);
-	is_green = lq_sta->is_green;
-
-	/* current tx rate */
-	index = lq_sta->last_txrate_idx;
-
-	IWL_DEBUG_RATE(priv, "Rate scale index %d for type %d\n", index,
-		       tbl->lq_type);
-
-	/* rates available for this association, and for modulation mode */
-	rate_mask = rs_get_supported_rates(lq_sta, hdr, tbl->lq_type);
-
-	IWL_DEBUG_RATE(priv, "mask 0x%04X\n", rate_mask);
-
-	/* mask with station rate restriction */
-	if (is_legacy(tbl->lq_type)) {
-		if (lq_sta->band == IEEE80211_BAND_5GHZ)
-			/* supp_rates has no CCK bits in A mode */
-			rate_scale_index_msk = (u16) (rate_mask &
-				(lq_sta->supp_rates << IWL_FIRST_OFDM_RATE));
-		else
-			rate_scale_index_msk = (u16) (rate_mask &
-						      lq_sta->supp_rates);
-
-	} else
-		rate_scale_index_msk = rate_mask;
-
-	if (!rate_scale_index_msk)
-		rate_scale_index_msk = rate_mask;
-
-	if (!((1 << index) & rate_scale_index_msk)) {
-		IWL_ERR(priv, "Current Rate is not valid\n");
-		if (lq_sta->search_better_tbl) {
-			/* revert to active table if search table is not valid*/
-			tbl->lq_type = LQ_NONE;
-			lq_sta->search_better_tbl = 0;
-			tbl = &(lq_sta->lq_info[lq_sta->active_tbl]);
-			/* get "active" rate info */
-			index = iwl_hwrate_to_plcp_idx(tbl->current_rate);
-			rs_update_rate_tbl(priv, ctx, lq_sta, tbl,
-					   index, is_green);
-		}
-		return;
-	}
-
-	/* Get expected throughput table and history window for current rate */
-	if (!tbl->expected_tpt) {
-		IWL_ERR(priv, "tbl->expected_tpt is NULL\n");
-		return;
-	}
-
-	/* force user max rate if set by user */
-	if ((lq_sta->max_rate_idx != -1) &&
-	    (lq_sta->max_rate_idx < index)) {
-		index = lq_sta->max_rate_idx;
-		update_lq = 1;
-		window = &(tbl->win[index]);
-		goto lq_update;
-	}
-
-	window = &(tbl->win[index]);
-
-	/*
-	 * If there is not enough history to calculate actual average
-	 * throughput, keep analyzing results of more tx frames, without
-	 * changing rate or mode (bypass most of the rest of this function).
-	 * Set up new rate table in uCode only if old rate is not supported
-	 * in current association (use new rate found above).
-	 */
-	fail_count = window->counter - window->success_counter;
-	if ((fail_count < IWL_RATE_MIN_FAILURE_TH) &&
-			(window->success_counter < IWL_RATE_MIN_SUCCESS_TH)) {
-		IWL_DEBUG_RATE(priv, "LQ: still below TH. succ=%d total=%d "
-			       "for index %d\n",
-			       window->success_counter, window->counter, index);
-
-		/* Can't calculate this yet; not enough history */
-		window->average_tpt = IWL_INVALID_VALUE;
-
-		/* Should we stay with this modulation mode,
-		 * or search for a new one? */
-		rs_stay_in_table(lq_sta, false);
-
-		goto out;
-	}
-	/* Else we have enough samples; calculate estimate of
-	 * actual average throughput */
-	if (window->average_tpt != ((window->success_ratio *
-			tbl->expected_tpt[index] + 64) / 128)) {
-		IWL_ERR(priv, "expected_tpt should have been calculated by now\n");
-		window->average_tpt = ((window->success_ratio *
-					tbl->expected_tpt[index] + 64) / 128);
-	}
-
-	/* If we are searching for better modulation mode, check success. */
-	if (lq_sta->search_better_tbl &&
-	    (iwl_tx_ant_restriction(priv) == IWL_ANT_OK_MULTI)) {
-		/* If good success, continue using the "search" mode;
-		 * no need to send new link quality command, since we're
-		 * continuing to use the setup that we've been trying. */
-		if (window->average_tpt > lq_sta->last_tpt) {
-
-			IWL_DEBUG_RATE(priv, "LQ: SWITCHING TO NEW TABLE "
-					"suc=%d cur-tpt=%d old-tpt=%d\n",
-					window->success_ratio,
-					window->average_tpt,
-					lq_sta->last_tpt);
-
-			if (!is_legacy(tbl->lq_type))
-				lq_sta->enable_counter = 1;
-
-			/* Swap tables; "search" becomes "active" */
-			lq_sta->active_tbl = active_tbl;
-			current_tpt = window->average_tpt;
-
-		/* Else poor success; go back to mode in "active" table */
-		} else {
-
-			IWL_DEBUG_RATE(priv, "LQ: GOING BACK TO THE OLD TABLE "
-					"suc=%d cur-tpt=%d old-tpt=%d\n",
-					window->success_ratio,
-					window->average_tpt,
-					lq_sta->last_tpt);
-
-			/* Nullify "search" table */
-			tbl->lq_type = LQ_NONE;
-
-			/* Revert to "active" table */
-			active_tbl = lq_sta->active_tbl;
-			tbl = &(lq_sta->lq_info[active_tbl]);
-
-			/* Revert to "active" rate and throughput info */
-			index = iwl_hwrate_to_plcp_idx(tbl->current_rate);
-			current_tpt = lq_sta->last_tpt;
-
-			/* Need to set up a new rate table in uCode */
-			update_lq = 1;
-		}
-
-		/* Either way, we've made a decision; modulation mode
-		 * search is done, allow rate adjustment next time. */
-		lq_sta->search_better_tbl = 0;
-		done_search = 1;	/* Don't switch modes below! */
-		goto lq_update;
-	}
-
-	/* (Else) not in search of better modulation mode, try for better
-	 * starting rate, while staying in this mode. */
-	high_low = rs_get_adjacent_rate(priv, index, rate_scale_index_msk,
-					tbl->lq_type);
-	low = high_low & 0xff;
-	high = (high_low >> 8) & 0xff;
-
-	/* If user set max rate, dont allow higher than user constrain */
-	if ((lq_sta->max_rate_idx != -1) &&
-	    (lq_sta->max_rate_idx < high))
-		high = IWL_RATE_INVALID;
-
-	sr = window->success_ratio;
-
-	/* Collect measured throughputs for current and adjacent rates */
-	current_tpt = window->average_tpt;
-	if (low != IWL_RATE_INVALID)
-		low_tpt = tbl->win[low].average_tpt;
-	if (high != IWL_RATE_INVALID)
-		high_tpt = tbl->win[high].average_tpt;
-
-	scale_action = 0;
-
-	/* Too many failures, decrease rate */
-	if ((sr <= IWL_RATE_DECREASE_TH) || (current_tpt == 0)) {
-		IWL_DEBUG_RATE(priv, "decrease rate because of low success_ratio\n");
-		scale_action = -1;
-
-	/* No throughput measured yet for adjacent rates; try increase. */
-	} else if ((low_tpt == IWL_INVALID_VALUE) &&
-		   (high_tpt == IWL_INVALID_VALUE)) {
-
-		if (high != IWL_RATE_INVALID && sr >= IWL_RATE_INCREASE_TH)
-			scale_action = 1;
-		else if (low != IWL_RATE_INVALID)
-			scale_action = 0;
-	}
-
-	/* Both adjacent throughputs are measured, but neither one has better
-	 * throughput; we're using the best rate, don't change it! */
-	else if ((low_tpt != IWL_INVALID_VALUE) &&
-		 (high_tpt != IWL_INVALID_VALUE) &&
-		 (low_tpt < current_tpt) &&
-		 (high_tpt < current_tpt))
-		scale_action = 0;
-
-	/* At least one adjacent rate's throughput is measured,
-	 * and may have better performance. */
-	else {
-		/* Higher adjacent rate's throughput is measured */
-		if (high_tpt != IWL_INVALID_VALUE) {
-			/* Higher rate has better throughput */
-			if (high_tpt > current_tpt &&
-					sr >= IWL_RATE_INCREASE_TH) {
-				scale_action = 1;
-			} else {
-				scale_action = 0;
-			}
-
-		/* Lower adjacent rate's throughput is measured */
-		} else if (low_tpt != IWL_INVALID_VALUE) {
-			/* Lower rate has better throughput */
-			if (low_tpt > current_tpt) {
-				IWL_DEBUG_RATE(priv,
-				    "decrease rate because of low tpt\n");
-				scale_action = -1;
-			} else if (sr >= IWL_RATE_INCREASE_TH) {
-				scale_action = 1;
-			}
-		}
-	}
-
-	/* Sanity check; asked for decrease, but success rate or throughput
-	 * has been good at old rate.  Don't change it. */
-	if ((scale_action == -1) && (low != IWL_RATE_INVALID) &&
-		    ((sr > IWL_RATE_HIGH_TH) ||
-		     (current_tpt > (100 * tbl->expected_tpt[low]))))
-		scale_action = 0;
-	if (!iwl_ht_enabled(priv) && !is_legacy(tbl->lq_type))
-		scale_action = -1;
-	if (iwl_tx_ant_restriction(priv) != IWL_ANT_OK_MULTI &&
-		(is_mimo2(tbl->lq_type) || is_mimo3(tbl->lq_type)))
-		scale_action = -1;
-
-	if ((priv->bt_traffic_load >= IWL_BT_COEX_TRAFFIC_LOAD_HIGH) &&
-	     (is_mimo2(tbl->lq_type) || is_mimo3(tbl->lq_type))) {
-		if (lq_sta->last_bt_traffic > priv->bt_traffic_load) {
-			/*
-			 * don't set scale_action, don't want to scale up if
-			 * the rate scale doesn't otherwise think that is a
-			 * good idea.
-			 */
-		} else if (lq_sta->last_bt_traffic <= priv->bt_traffic_load) {
-			scale_action = -1;
-		}
-	}
-	lq_sta->last_bt_traffic = priv->bt_traffic_load;
-
-	if ((priv->bt_traffic_load >= IWL_BT_COEX_TRAFFIC_LOAD_HIGH) &&
-	     (is_mimo2(tbl->lq_type) || is_mimo3(tbl->lq_type))) {
-		/* search for a new modulation */
-		rs_stay_in_table(lq_sta, true);
-		goto lq_update;
-	}
-
-	switch (scale_action) {
-	case -1:
-		/* Decrease starting rate, update uCode's rate table */
-		if (low != IWL_RATE_INVALID) {
-			update_lq = 1;
-			index = low;
-		}
-
-		break;
-	case 1:
-		/* Increase starting rate, update uCode's rate table */
-		if (high != IWL_RATE_INVALID) {
-			update_lq = 1;
-			index = high;
-		}
-
-		break;
-	case 0:
-		/* No change */
-	default:
-		break;
-	}
-
-	IWL_DEBUG_RATE(priv, "choose rate scale index %d action %d low %d "
-		    "high %d type %d\n",
-		     index, scale_action, low, high, tbl->lq_type);
-
-lq_update:
-	/* Replace uCode's rate table for the destination station. */
-	if (update_lq)
-		rs_update_rate_tbl(priv, ctx, lq_sta, tbl, index, is_green);
-
-	if (iwl_tx_ant_restriction(priv) == IWL_ANT_OK_MULTI) {
-		/* Should we stay with this modulation mode,
-		 * or search for a new one? */
-	  rs_stay_in_table(lq_sta, false);
-	}
-	/*
-	 * Search for new modulation mode if we're:
-	 * 1)  Not changing rates right now
-	 * 2)  Not just finishing up a search
-	 * 3)  Allowing a new search
-	 */
-	if (!update_lq && !done_search && !lq_sta->stay_in_tbl && window->counter) {
-		/* Save current throughput to compare with "search" throughput*/
-		lq_sta->last_tpt = current_tpt;
-
-		/* Select a new "search" modulation mode to try.
-		 * If one is found, set up the new "search" table. */
-		if (is_legacy(tbl->lq_type))
-			rs_move_legacy_other(priv, lq_sta, conf, sta, index);
-		else if (is_siso(tbl->lq_type))
-			rs_move_siso_to_other(priv, lq_sta, conf, sta, index);
-		else if (is_mimo2(tbl->lq_type))
-			rs_move_mimo2_to_other(priv, lq_sta, conf, sta, index);
-		else
-			rs_move_mimo3_to_other(priv, lq_sta, conf, sta, index);
-
-		/* If new "search" mode was selected, set up in uCode table */
-		if (lq_sta->search_better_tbl) {
-			/* Access the "search" table, clear its history. */
-			tbl = &(lq_sta->lq_info[(1 - lq_sta->active_tbl)]);
-			for (i = 0; i < IWL_RATE_COUNT; i++)
-				rs_rate_scale_clear_window(&(tbl->win[i]));
-
-			/* Use new "search" start rate */
-			index = iwl_hwrate_to_plcp_idx(tbl->current_rate);
-
-			IWL_DEBUG_RATE(priv, "Switch current  mcs: %X index: %d\n",
-				     tbl->current_rate, index);
-			rs_fill_link_cmd(priv, lq_sta, tbl->current_rate);
-			iwl_send_lq_cmd(priv, ctx, &lq_sta->lq, CMD_ASYNC, false);
-		} else
-			done_search = 1;
-	}
-
-	if (done_search && !lq_sta->stay_in_tbl) {
-		/* If the "active" (non-search) mode was legacy,
-		 * and we've tried switching antennas,
-		 * but we haven't been able to try HT modes (not available),
-		 * stay with best antenna legacy modulation for a while
-		 * before next round of mode comparisons. */
-		tbl1 = &(lq_sta->lq_info[lq_sta->active_tbl]);
-		if (is_legacy(tbl1->lq_type) && !conf_is_ht(conf) &&
-		    lq_sta->action_counter > tbl1->max_search) {
-			IWL_DEBUG_RATE(priv, "LQ: STAY in legacy table\n");
-			rs_set_stay_in_table(priv, 1, lq_sta);
-		}
-
-		/* If we're in an HT mode, and all 3 mode switch actions
-		 * have been tried and compared, stay in this best modulation
-		 * mode for a while before next round of mode comparisons. */
-		if (lq_sta->enable_counter &&
-		    (lq_sta->action_counter >= tbl1->max_search) &&
-		    iwl_ht_enabled(priv)) {
-			if ((lq_sta->last_tpt > IWL_AGG_TPT_THREHOLD) &&
-			    (lq_sta->tx_agg_tid_en & (1 << tid)) &&
-			    (tid != IWL_MAX_TID_COUNT)) {
-				u8 sta_id = lq_sta->lq.sta_id;
-				tid_data = &priv->tid_data[sta_id][tid];
-				if (tid_data->agg.state == IWL_AGG_OFF) {
-					IWL_DEBUG_RATE(priv,
-						       "try to aggregate tid %d\n",
-						       tid);
-					rs_tl_turn_on_agg(priv, tid,
-							  lq_sta, sta);
-				}
-			}
-			rs_set_stay_in_table(priv, 0, lq_sta);
-		}
-	}
-
-out:
-	tbl->current_rate = rate_n_flags_from_tbl(priv, tbl, index, is_green);
-	lq_sta->last_txrate_idx = index;
-}
-
-/**
- * rs_initialize_lq - Initialize a station's hardware rate table
- *
- * The uCode's station table contains a table of fallback rates
- * for automatic fallback during transmission.
- *
- * NOTE: This sets up a default set of values.  These will be replaced later
- *       if the driver's iwl-agn-rs rate scaling algorithm is used, instead of
- *       rc80211_simple.
- *
- * NOTE: Run REPLY_ADD_STA command to set up station table entry, before
- *       calling this function (which runs REPLY_TX_LINK_QUALITY_CMD,
- *       which requires station table entry to exist).
- */
-static void rs_initialize_lq(struct iwl_priv *priv,
-			     struct ieee80211_sta *sta,
-			     struct iwl_lq_sta *lq_sta)
-{
-	struct iwl_scale_tbl_info *tbl;
-	int rate_idx;
-	int i;
-	u32 rate;
-	u8 use_green = rs_use_green(sta);
-	u8 active_tbl = 0;
-	u8 valid_tx_ant;
-	struct iwl_station_priv *sta_priv;
-	struct iwl_rxon_context *ctx;
-
-	if (!sta || !lq_sta)
-		return;
-
-	sta_priv = (void *)sta->drv_priv;
-	ctx = sta_priv->ctx;
-
-	i = lq_sta->last_txrate_idx;
-
-	valid_tx_ant = priv->hw_params.valid_tx_ant;
-
-	if (!lq_sta->search_better_tbl)
-		active_tbl = lq_sta->active_tbl;
-	else
-		active_tbl = 1 - lq_sta->active_tbl;
-
-	tbl = &(lq_sta->lq_info[active_tbl]);
-
-	if ((i < 0) || (i >= IWL_RATE_COUNT))
-		i = 0;
-
-	rate = iwl_rates[i].plcp;
-	tbl->ant_type = first_antenna(valid_tx_ant);
-	rate |= tbl->ant_type << RATE_MCS_ANT_POS;
-
-	if (i >= IWL_FIRST_CCK_RATE && i <= IWL_LAST_CCK_RATE)
-		rate |= RATE_MCS_CCK_MSK;
-
-	rs_get_tbl_info_from_mcs(rate, priv->band, tbl, &rate_idx);
-	if (!rs_is_valid_ant(valid_tx_ant, tbl->ant_type))
-	    rs_toggle_antenna(valid_tx_ant, &rate, tbl);
-
-	rate = rate_n_flags_from_tbl(priv, tbl, rate_idx, use_green);
-	tbl->current_rate = rate;
-	rs_set_expected_tpt_table(lq_sta, tbl);
-	rs_fill_link_cmd(NULL, lq_sta, rate);
-	priv->stations[lq_sta->lq.sta_id].lq = &lq_sta->lq;
-	iwl_send_lq_cmd(priv, ctx, &lq_sta->lq, CMD_SYNC, true);
-}
-
-static void rs_get_rate(void *priv_r, struct ieee80211_sta *sta, void *priv_sta,
-			struct ieee80211_tx_rate_control *txrc)
-{
-
-	struct sk_buff *skb = txrc->skb;
-	struct ieee80211_supported_band *sband = txrc->sband;
-	struct iwl_op_mode *op_mode __maybe_unused =
-			(struct iwl_op_mode *)priv_r;
-	struct iwl_priv *priv __maybe_unused = IWL_OP_MODE_GET_DVM(op_mode);
-	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
-	struct iwl_lq_sta *lq_sta = priv_sta;
-	int rate_idx;
-
-	IWL_DEBUG_RATE_LIMIT(priv, "rate scale calculate new rate for skb\n");
-
-	/* Get max rate if user set max rate */
-	if (lq_sta) {
-		lq_sta->max_rate_idx = txrc->max_rate_idx;
-		if ((sband->band == IEEE80211_BAND_5GHZ) &&
-		    (lq_sta->max_rate_idx != -1))
-			lq_sta->max_rate_idx += IWL_FIRST_OFDM_RATE;
-		if ((lq_sta->max_rate_idx < 0) ||
-		    (lq_sta->max_rate_idx >= IWL_RATE_COUNT))
-			lq_sta->max_rate_idx = -1;
-	}
-
-	/* Treat uninitialized rate scaling data same as non-existing. */
-	if (lq_sta && !lq_sta->drv) {
-		IWL_DEBUG_RATE(priv, "Rate scaling not initialized yet.\n");
-		priv_sta = NULL;
-	}
-
-	/* Send management frames and NO_ACK data using lowest rate. */
-	if (rate_control_send_low(sta, priv_sta, txrc))
-		return;
-
-	rate_idx  = lq_sta->last_txrate_idx;
-
-	if (lq_sta->last_rate_n_flags & RATE_MCS_HT_MSK) {
-		rate_idx -= IWL_FIRST_OFDM_RATE;
-		/* 6M and 9M shared same MCS index */
-		rate_idx = (rate_idx > 0) ? (rate_idx - 1) : 0;
-		if (rs_extract_rate(lq_sta->last_rate_n_flags) >=
-		    IWL_RATE_MIMO3_6M_PLCP)
-			rate_idx = rate_idx + (2 * MCS_INDEX_PER_STREAM);
-		else if (rs_extract_rate(lq_sta->last_rate_n_flags) >=
-			 IWL_RATE_MIMO2_6M_PLCP)
-			rate_idx = rate_idx + MCS_INDEX_PER_STREAM;
-		info->control.rates[0].flags = IEEE80211_TX_RC_MCS;
-		if (lq_sta->last_rate_n_flags & RATE_MCS_SGI_MSK)
-			info->control.rates[0].flags |= IEEE80211_TX_RC_SHORT_GI;
-		if (lq_sta->last_rate_n_flags & RATE_MCS_DUP_MSK)
-			info->control.rates[0].flags |= IEEE80211_TX_RC_DUP_DATA;
-		if (lq_sta->last_rate_n_flags & RATE_MCS_HT40_MSK)
-			info->control.rates[0].flags |= IEEE80211_TX_RC_40_MHZ_WIDTH;
-		if (lq_sta->last_rate_n_flags & RATE_MCS_GF_MSK)
-			info->control.rates[0].flags |= IEEE80211_TX_RC_GREEN_FIELD;
-	} else {
-		/* Check for invalid rates */
-		if ((rate_idx < 0) || (rate_idx >= IWL_RATE_COUNT_LEGACY) ||
-				((sband->band == IEEE80211_BAND_5GHZ) &&
-				 (rate_idx < IWL_FIRST_OFDM_RATE)))
-			rate_idx = rate_lowest_index(sband, sta);
-		/* On valid 5 GHz rate, adjust index */
-		else if (sband->band == IEEE80211_BAND_5GHZ)
-			rate_idx -= IWL_FIRST_OFDM_RATE;
-		info->control.rates[0].flags = 0;
-	}
-	info->control.rates[0].idx = rate_idx;
-
-}
-
-static void *rs_alloc_sta(void *priv_rate, struct ieee80211_sta *sta,
-			  gfp_t gfp)
-{
-	struct iwl_station_priv *sta_priv = (struct iwl_station_priv *) sta->drv_priv;
-	struct iwl_op_mode *op_mode __maybe_unused =
-			(struct iwl_op_mode *)priv_rate;
-	struct iwl_priv *priv __maybe_unused = IWL_OP_MODE_GET_DVM(op_mode);
-
-	IWL_DEBUG_RATE(priv, "create station rate scale window\n");
-
-	return &sta_priv->lq_sta;
-}
-
-/*
- * Called after adding a new station to initialize rate scaling
- */
-void iwl_rs_rate_init(struct iwl_priv *priv, struct ieee80211_sta *sta, u8 sta_id)
-{
-	int i, j;
-	struct ieee80211_hw *hw = priv->hw;
-	struct ieee80211_conf *conf = &priv->hw->conf;
-	struct ieee80211_sta_ht_cap *ht_cap = &sta->ht_cap;
-	struct iwl_station_priv *sta_priv;
-	struct iwl_lq_sta *lq_sta;
-	struct ieee80211_supported_band *sband;
-	unsigned long supp; /* must be unsigned long for for_each_set_bit */
-
-	sta_priv = (struct iwl_station_priv *) sta->drv_priv;
-	lq_sta = &sta_priv->lq_sta;
-	sband = hw->wiphy->bands[conf->channel->band];
-
-
-	lq_sta->lq.sta_id = sta_id;
-
-	for (j = 0; j < LQ_SIZE; j++)
-		for (i = 0; i < IWL_RATE_COUNT; i++)
-			rs_rate_scale_clear_window(&lq_sta->lq_info[j].win[i]);
-
-	lq_sta->flush_timer = 0;
-	lq_sta->supp_rates = sta->supp_rates[sband->band];
-	for (j = 0; j < LQ_SIZE; j++)
-		for (i = 0; i < IWL_RATE_COUNT; i++)
-			rs_rate_scale_clear_window(&lq_sta->lq_info[j].win[i]);
-
-	IWL_DEBUG_RATE(priv, "LQ: *** rate scale station global init for station %d ***\n",
-		       sta_id);
-	/* TODO: what is a good starting rate for STA? About middle? Maybe not
-	 * the lowest or the highest rate.. Could consider using RSSI from
-	 * previous packets? Need to have IEEE 802.1X auth succeed immediately
-	 * after assoc.. */
-
-	lq_sta->is_dup = 0;
-	lq_sta->max_rate_idx = -1;
-	lq_sta->missed_rate_counter = IWL_MISSED_RATE_MAX;
-	lq_sta->is_green = rs_use_green(sta);
-	lq_sta->band = sband->band;
-	/*
-	 * active legacy rates as per supported rates bitmap
-	 */
-	supp = sta->supp_rates[sband->band];
-	lq_sta->active_legacy_rate = 0;
-	for_each_set_bit(i, &supp, BITS_PER_LONG)
-		lq_sta->active_legacy_rate |= BIT(sband->bitrates[i].hw_value);
-
-	/*
-	 * active_siso_rate mask includes 9 MBits (bit 5), and CCK (bits 0-3),
-	 * supp_rates[] does not; shift to convert format, force 9 MBits off.
-	 */
-	lq_sta->active_siso_rate = ht_cap->mcs.rx_mask[0] << 1;
-	lq_sta->active_siso_rate |= ht_cap->mcs.rx_mask[0] & 0x1;
-	lq_sta->active_siso_rate &= ~((u16)0x2);
-	lq_sta->active_siso_rate <<= IWL_FIRST_OFDM_RATE;
-
-	/* Same here */
-	lq_sta->active_mimo2_rate = ht_cap->mcs.rx_mask[1] << 1;
-	lq_sta->active_mimo2_rate |= ht_cap->mcs.rx_mask[1] & 0x1;
-	lq_sta->active_mimo2_rate &= ~((u16)0x2);
-	lq_sta->active_mimo2_rate <<= IWL_FIRST_OFDM_RATE;
-
-	lq_sta->active_mimo3_rate = ht_cap->mcs.rx_mask[2] << 1;
-	lq_sta->active_mimo3_rate |= ht_cap->mcs.rx_mask[2] & 0x1;
-	lq_sta->active_mimo3_rate &= ~((u16)0x2);
-	lq_sta->active_mimo3_rate <<= IWL_FIRST_OFDM_RATE;
-
-	IWL_DEBUG_RATE(priv, "SISO-RATE=%X MIMO2-RATE=%X MIMO3-RATE=%X\n",
-		     lq_sta->active_siso_rate,
-		     lq_sta->active_mimo2_rate,
-		     lq_sta->active_mimo3_rate);
-
-	/* These values will be overridden later */
-	lq_sta->lq.general_params.single_stream_ant_msk =
-		first_antenna(priv->hw_params.valid_tx_ant);
-	lq_sta->lq.general_params.dual_stream_ant_msk =
-		priv->hw_params.valid_tx_ant &
-		~first_antenna(priv->hw_params.valid_tx_ant);
-	if (!lq_sta->lq.general_params.dual_stream_ant_msk) {
-		lq_sta->lq.general_params.dual_stream_ant_msk = ANT_AB;
-	} else if (num_of_ant(priv->hw_params.valid_tx_ant) == 2) {
-		lq_sta->lq.general_params.dual_stream_ant_msk =
-			priv->hw_params.valid_tx_ant;
-	}
-
-	/* as default allow aggregation for all tids */
-	lq_sta->tx_agg_tid_en = IWL_AGG_ALL_TID;
-	lq_sta->drv = priv;
-
-	/* Set last_txrate_idx to lowest rate */
-	lq_sta->last_txrate_idx = rate_lowest_index(sband, sta);
-	if (sband->band == IEEE80211_BAND_5GHZ)
-		lq_sta->last_txrate_idx += IWL_FIRST_OFDM_RATE;
-	lq_sta->is_agg = 0;
-#ifdef CONFIG_IWLWIFI_DEVICE_TESTMODE
-	priv->tm_fixed_rate = 0;
-#endif
-#ifdef CONFIG_MAC80211_DEBUGFS
-	lq_sta->dbg_fixed_rate = 0;
-#endif
-
-	rs_initialize_lq(priv, sta, lq_sta);
-}
-
-static void rs_fill_link_cmd(struct iwl_priv *priv,
-			     struct iwl_lq_sta *lq_sta, u32 new_rate)
-{
-	struct iwl_scale_tbl_info tbl_type;
-	int index = 0;
-	int rate_idx;
-	int repeat_rate = 0;
-	u8 ant_toggle_cnt = 0;
-	u8 use_ht_possible = 1;
-	u8 valid_tx_ant = 0;
-	struct iwl_station_priv *sta_priv =
-		container_of(lq_sta, struct iwl_station_priv, lq_sta);
-	struct iwl_link_quality_cmd *lq_cmd = &lq_sta->lq;
-
-	/* Override starting rate (index 0) if needed for debug purposes */
-	rs_dbgfs_set_mcs(lq_sta, &new_rate, index);
-
-	/* Interpret new_rate (rate_n_flags) */
-	rs_get_tbl_info_from_mcs(new_rate, lq_sta->band,
-				  &tbl_type, &rate_idx);
-
-	if (priv && priv->bt_full_concurrent) {
-		/* 1x1 only */
-		tbl_type.ant_type =
-			first_antenna(priv->hw_params.valid_tx_ant);
-	}
-
-	/* How many times should we repeat the initial rate? */
-	if (is_legacy(tbl_type.lq_type)) {
-		ant_toggle_cnt = 1;
-		repeat_rate = IWL_NUMBER_TRY;
-	} else {
-		repeat_rate = min(IWL_HT_NUMBER_TRY,
-				  LINK_QUAL_AGG_DISABLE_START_DEF - 1);
-	}
-
-	lq_cmd->general_params.mimo_delimiter =
-			is_mimo(tbl_type.lq_type) ? 1 : 0;
-
-	/* Fill 1st table entry (index 0) */
-	lq_cmd->rs_table[index].rate_n_flags = cpu_to_le32(new_rate);
-
-	if (num_of_ant(tbl_type.ant_type) == 1) {
-		lq_cmd->general_params.single_stream_ant_msk =
-						tbl_type.ant_type;
-	} else if (num_of_ant(tbl_type.ant_type) == 2) {
-		lq_cmd->general_params.dual_stream_ant_msk =
-						tbl_type.ant_type;
-	} /* otherwise we don't modify the existing value */
-
-	index++;
-	repeat_rate--;
-	if (priv) {
-		if (priv->bt_full_concurrent)
-			valid_tx_ant = ANT_A;
-		else
-			valid_tx_ant = priv->hw_params.valid_tx_ant;
-	}
-
-	/* Fill rest of rate table */
-	while (index < LINK_QUAL_MAX_RETRY_NUM) {
-		/* Repeat initial/next rate.
-		 * For legacy IWL_NUMBER_TRY == 1, this loop will not execute.
-		 * For HT IWL_HT_NUMBER_TRY == 3, this executes twice. */
-		while (repeat_rate > 0 && (index < LINK_QUAL_MAX_RETRY_NUM)) {
-			if (is_legacy(tbl_type.lq_type)) {
-				if (ant_toggle_cnt < NUM_TRY_BEFORE_ANT_TOGGLE)
-					ant_toggle_cnt++;
-				else if (priv &&
-					 rs_toggle_antenna(valid_tx_ant,
-							&new_rate, &tbl_type))
-					ant_toggle_cnt = 1;
-			}
-
-			/* Override next rate if needed for debug purposes */
-			rs_dbgfs_set_mcs(lq_sta, &new_rate, index);
-
-			/* Fill next table entry */
-			lq_cmd->rs_table[index].rate_n_flags =
-					cpu_to_le32(new_rate);
-			repeat_rate--;
-			index++;
-		}
-
-		rs_get_tbl_info_from_mcs(new_rate, lq_sta->band, &tbl_type,
-						&rate_idx);
-
-		if (priv && priv->bt_full_concurrent) {
-			/* 1x1 only */
-			tbl_type.ant_type =
-			    first_antenna(priv->hw_params.valid_tx_ant);
-		}
-
-		/* Indicate to uCode which entries might be MIMO.
-		 * If initial rate was MIMO, this will finally end up
-		 * as (IWL_HT_NUMBER_TRY * 2), after 2nd pass, otherwise 0. */
-		if (is_mimo(tbl_type.lq_type))
-			lq_cmd->general_params.mimo_delimiter = index;
-
-		/* Get next rate */
-		new_rate = rs_get_lower_rate(lq_sta, &tbl_type, rate_idx,
-					     use_ht_possible);
-
-		/* How many times should we repeat the next rate? */
-		if (is_legacy(tbl_type.lq_type)) {
-			if (ant_toggle_cnt < NUM_TRY_BEFORE_ANT_TOGGLE)
-				ant_toggle_cnt++;
-			else if (priv &&
-				 rs_toggle_antenna(valid_tx_ant,
-						   &new_rate, &tbl_type))
-				ant_toggle_cnt = 1;
-
-			repeat_rate = IWL_NUMBER_TRY;
-		} else {
-			repeat_rate = IWL_HT_NUMBER_TRY;
-		}
-
-		/* Don't allow HT rates after next pass.
-		 * rs_get_lower_rate() will change type to LQ_A or LQ_G. */
-		use_ht_possible = 0;
-
-		/* Override next rate if needed for debug purposes */
-		rs_dbgfs_set_mcs(lq_sta, &new_rate, index);
-
-		/* Fill next table entry */
-		lq_cmd->rs_table[index].rate_n_flags = cpu_to_le32(new_rate);
-
-		index++;
-		repeat_rate--;
-	}
-
-	lq_cmd->agg_params.agg_frame_cnt_limit =
-		sta_priv->max_agg_bufsize ?: LINK_QUAL_AGG_FRAME_LIMIT_DEF;
-	lq_cmd->agg_params.agg_dis_start_th = LINK_QUAL_AGG_DISABLE_START_DEF;
-
-	lq_cmd->agg_params.agg_time_limit =
-		cpu_to_le16(LINK_QUAL_AGG_TIME_LIMIT_DEF);
-	/*
-	 * overwrite if needed, pass aggregation time limit
-	 * to uCode in uSec
-	 */
-	if (priv && priv->cfg->bt_params &&
-	    priv->cfg->bt_params->agg_time_limit &&
-	    priv->bt_traffic_load >= IWL_BT_COEX_TRAFFIC_LOAD_HIGH)
-		lq_cmd->agg_params.agg_time_limit =
-			cpu_to_le16(priv->cfg->bt_params->agg_time_limit);
-}
-
-static void *rs_alloc(struct ieee80211_hw *hw, struct dentry *debugfsdir)
-{
-	return hw->priv;
-}
-/* rate scale requires free function to be implemented */
-static void rs_free(void *priv_rate)
-{
-	return;
-}
-
-static void rs_free_sta(void *priv_r, struct ieee80211_sta *sta,
-			void *priv_sta)
-{
-	struct iwl_op_mode *op_mode __maybe_unused = priv_r;
-	struct iwl_priv *priv __maybe_unused = IWL_OP_MODE_GET_DVM(op_mode);
-
-	IWL_DEBUG_RATE(priv, "enter\n");
-	IWL_DEBUG_RATE(priv, "leave\n");
-}
-
-#ifdef CONFIG_MAC80211_DEBUGFS
-static void rs_dbgfs_set_mcs(struct iwl_lq_sta *lq_sta,
-			     u32 *rate_n_flags, int index)
-{
-	struct iwl_priv *priv;
-	u8 valid_tx_ant;
-	u8 ant_sel_tx;
-
-	priv = lq_sta->drv;
-	valid_tx_ant = priv->hw_params.valid_tx_ant;
-	if (lq_sta->dbg_fixed_rate) {
-		ant_sel_tx =
-		  ((lq_sta->dbg_fixed_rate & RATE_MCS_ANT_ABC_MSK)
-		  >> RATE_MCS_ANT_POS);
-		if ((valid_tx_ant & ant_sel_tx) == ant_sel_tx) {
-			*rate_n_flags = lq_sta->dbg_fixed_rate;
-			IWL_DEBUG_RATE(priv, "Fixed rate ON\n");
-		} else {
-			lq_sta->dbg_fixed_rate = 0;
-			IWL_ERR(priv,
-			    "Invalid antenna selection 0x%X, Valid is 0x%X\n",
-			    ant_sel_tx, valid_tx_ant);
-			IWL_DEBUG_RATE(priv, "Fixed rate OFF\n");
-		}
-	} else {
-		IWL_DEBUG_RATE(priv, "Fixed rate OFF\n");
-	}
-}
-
-static ssize_t rs_sta_dbgfs_scale_table_write(struct file *file,
-			const char __user *user_buf, size_t count, loff_t *ppos)
-{
-	struct iwl_lq_sta *lq_sta = file->private_data;
-	struct iwl_priv *priv;
-	char buf[64];
-	size_t buf_size;
-	u32 parsed_rate;
-
-
-	priv = lq_sta->drv;
-	memset(buf, 0, sizeof(buf));
-	buf_size = min(count, sizeof(buf) -  1);
-	if (copy_from_user(buf, user_buf, buf_size))
-		return -EFAULT;
-
-	if (sscanf(buf, "%x", &parsed_rate) == 1)
-		lq_sta->dbg_fixed_rate = parsed_rate;
-	else
-		lq_sta->dbg_fixed_rate = 0;
-
-	rs_program_fix_rate(priv, lq_sta);
-
-	return count;
-}
-
-static ssize_t rs_sta_dbgfs_scale_table_read(struct file *file,
-			char __user *user_buf, size_t count, loff_t *ppos)
-{
-	char *buff;
-	int desc = 0;
-	int i = 0;
-	int index = 0;
-	ssize_t ret;
-
-	struct iwl_lq_sta *lq_sta = file->private_data;
-	struct iwl_priv *priv;
-	struct iwl_scale_tbl_info *tbl = &(lq_sta->lq_info[lq_sta->active_tbl]);
-
-	priv = lq_sta->drv;
-	buff = kmalloc(1024, GFP_KERNEL);
-	if (!buff)
-		return -ENOMEM;
-
-	desc += sprintf(buff+desc, "sta_id %d\n", lq_sta->lq.sta_id);
-	desc += sprintf(buff+desc, "failed=%d success=%d rate=0%X\n",
-			lq_sta->total_failed, lq_sta->total_success,
-			lq_sta->active_legacy_rate);
-	desc += sprintf(buff+desc, "fixed rate 0x%X\n",
-			lq_sta->dbg_fixed_rate);
-	desc += sprintf(buff+desc, "valid_tx_ant %s%s%s\n",
-	    (priv->hw_params.valid_tx_ant & ANT_A) ? "ANT_A," : "",
-	    (priv->hw_params.valid_tx_ant & ANT_B) ? "ANT_B," : "",
-	    (priv->hw_params.valid_tx_ant & ANT_C) ? "ANT_C" : "");
-	desc += sprintf(buff+desc, "lq type %s\n",
-	   (is_legacy(tbl->lq_type)) ? "legacy" : "HT");
-	if (is_Ht(tbl->lq_type)) {
-		desc += sprintf(buff+desc, " %s",
-		   (is_siso(tbl->lq_type)) ? "SISO" :
-		   ((is_mimo2(tbl->lq_type)) ? "MIMO2" : "MIMO3"));
-		   desc += sprintf(buff+desc, " %s",
-		   (tbl->is_ht40) ? "40MHz" : "20MHz");
-		   desc += sprintf(buff+desc, " %s %s %s\n", (tbl->is_SGI) ? "SGI" : "",
-		   (lq_sta->is_green) ? "GF enabled" : "",
-		   (lq_sta->is_agg) ? "AGG on" : "");
-	}
-	desc += sprintf(buff+desc, "last tx rate=0x%X\n",
-		lq_sta->last_rate_n_flags);
-	desc += sprintf(buff+desc, "general:"
-		"flags=0x%X mimo-d=%d s-ant0x%x d-ant=0x%x\n",
-		lq_sta->lq.general_params.flags,
-		lq_sta->lq.general_params.mimo_delimiter,
-		lq_sta->lq.general_params.single_stream_ant_msk,
-		lq_sta->lq.general_params.dual_stream_ant_msk);
-
-	desc += sprintf(buff+desc, "agg:"
-			"time_limit=%d dist_start_th=%d frame_cnt_limit=%d\n",
-			le16_to_cpu(lq_sta->lq.agg_params.agg_time_limit),
-			lq_sta->lq.agg_params.agg_dis_start_th,
-			lq_sta->lq.agg_params.agg_frame_cnt_limit);
-
-	desc += sprintf(buff+desc,
-			"Start idx [0]=0x%x [1]=0x%x [2]=0x%x [3]=0x%x\n",
-			lq_sta->lq.general_params.start_rate_index[0],
-			lq_sta->lq.general_params.start_rate_index[1],
-			lq_sta->lq.general_params.start_rate_index[2],
-			lq_sta->lq.general_params.start_rate_index[3]);
-
-	for (i = 0; i < LINK_QUAL_MAX_RETRY_NUM; i++) {
-		index = iwl_hwrate_to_plcp_idx(
-			le32_to_cpu(lq_sta->lq.rs_table[i].rate_n_flags));
-		if (is_legacy(tbl->lq_type)) {
-			desc += sprintf(buff+desc, " rate[%d] 0x%X %smbps\n",
-				i, le32_to_cpu(lq_sta->lq.rs_table[i].rate_n_flags),
-				iwl_rate_mcs[index].mbps);
-		} else {
-			desc += sprintf(buff+desc, " rate[%d] 0x%X %smbps (%s)\n",
-				i, le32_to_cpu(lq_sta->lq.rs_table[i].rate_n_flags),
-				iwl_rate_mcs[index].mbps, iwl_rate_mcs[index].mcs);
-		}
-	}
-
-	ret = simple_read_from_buffer(user_buf, count, ppos, buff, desc);
-	kfree(buff);
-	return ret;
-}
-
-static const struct file_operations rs_sta_dbgfs_scale_table_ops = {
-	.write = rs_sta_dbgfs_scale_table_write,
-	.read = rs_sta_dbgfs_scale_table_read,
-	.open = simple_open,
-	.llseek = default_llseek,
-};
-static ssize_t rs_sta_dbgfs_stats_table_read(struct file *file,
-			char __user *user_buf, size_t count, loff_t *ppos)
-{
-	char *buff;
-	int desc = 0;
-	int i, j;
-	ssize_t ret;
-
-	struct iwl_lq_sta *lq_sta = file->private_data;
-
-	buff = kmalloc(1024, GFP_KERNEL);
-	if (!buff)
-		return -ENOMEM;
-
-	for (i = 0; i < LQ_SIZE; i++) {
-		desc += sprintf(buff+desc,
-				"%s type=%d SGI=%d HT40=%d DUP=%d GF=%d\n"
-				"rate=0x%X\n",
-				lq_sta->active_tbl == i ? "*" : "x",
-				lq_sta->lq_info[i].lq_type,
-				lq_sta->lq_info[i].is_SGI,
-				lq_sta->lq_info[i].is_ht40,
-				lq_sta->lq_info[i].is_dup,
-				lq_sta->is_green,
-				lq_sta->lq_info[i].current_rate);
-		for (j = 0; j < IWL_RATE_COUNT; j++) {
-			desc += sprintf(buff+desc,
-				"counter=%d success=%d %%=%d\n",
-				lq_sta->lq_info[i].win[j].counter,
-				lq_sta->lq_info[i].win[j].success_counter,
-				lq_sta->lq_info[i].win[j].success_ratio);
-		}
-	}
-	ret = simple_read_from_buffer(user_buf, count, ppos, buff, desc);
-	kfree(buff);
-	return ret;
-}
-
-static const struct file_operations rs_sta_dbgfs_stats_table_ops = {
-	.read = rs_sta_dbgfs_stats_table_read,
-	.open = simple_open,
-	.llseek = default_llseek,
-};
-
-static ssize_t rs_sta_dbgfs_rate_scale_data_read(struct file *file,
-			char __user *user_buf, size_t count, loff_t *ppos)
-{
-	struct iwl_lq_sta *lq_sta = file->private_data;
-	struct iwl_scale_tbl_info *tbl = &lq_sta->lq_info[lq_sta->active_tbl];
-	char buff[120];
-	int desc = 0;
-
-	if (is_Ht(tbl->lq_type))
-		desc += sprintf(buff+desc,
-				"Bit Rate= %d Mb/s\n",
-				tbl->expected_tpt[lq_sta->last_txrate_idx]);
-	else
-		desc += sprintf(buff+desc,
-				"Bit Rate= %d Mb/s\n",
-				iwl_rates[lq_sta->last_txrate_idx].ieee >> 1);
-
-	return simple_read_from_buffer(user_buf, count, ppos, buff, desc);
-}
-
-static const struct file_operations rs_sta_dbgfs_rate_scale_data_ops = {
-	.read = rs_sta_dbgfs_rate_scale_data_read,
-	.open = simple_open,
-	.llseek = default_llseek,
-};
-
-static void rs_add_debugfs(void *priv, void *priv_sta,
-					struct dentry *dir)
-{
-	struct iwl_lq_sta *lq_sta = priv_sta;
-	lq_sta->rs_sta_dbgfs_scale_table_file =
-		debugfs_create_file("rate_scale_table", S_IRUSR | S_IWUSR, dir,
-				lq_sta, &rs_sta_dbgfs_scale_table_ops);
-	lq_sta->rs_sta_dbgfs_stats_table_file =
-		debugfs_create_file("rate_stats_table", S_IRUSR, dir,
-			lq_sta, &rs_sta_dbgfs_stats_table_ops);
-	lq_sta->rs_sta_dbgfs_rate_scale_data_file =
-		debugfs_create_file("rate_scale_data", S_IRUSR, dir,
-			lq_sta, &rs_sta_dbgfs_rate_scale_data_ops);
-	lq_sta->rs_sta_dbgfs_tx_agg_tid_en_file =
-		debugfs_create_u8("tx_agg_tid_enable", S_IRUSR | S_IWUSR, dir,
-		&lq_sta->tx_agg_tid_en);
-
-}
-
-static void rs_remove_debugfs(void *priv, void *priv_sta)
-{
-	struct iwl_lq_sta *lq_sta = priv_sta;
-	debugfs_remove(lq_sta->rs_sta_dbgfs_scale_table_file);
-	debugfs_remove(lq_sta->rs_sta_dbgfs_stats_table_file);
-	debugfs_remove(lq_sta->rs_sta_dbgfs_rate_scale_data_file);
-	debugfs_remove(lq_sta->rs_sta_dbgfs_tx_agg_tid_en_file);
-}
-#endif
-
-/*
- * Initialization of rate scaling information is done by driver after
- * the station is added. Since mac80211 calls this function before a
- * station is added we ignore it.
- */
-static void rs_rate_init_stub(void *priv_r, struct ieee80211_supported_band *sband,
-			 struct ieee80211_sta *sta, void *priv_sta)
-{
-}
-static struct rate_control_ops rs_ops = {
-	.module = NULL,
-	.name = RS_NAME,
-	.tx_status = rs_tx_status,
-	.get_rate = rs_get_rate,
-	.rate_init = rs_rate_init_stub,
-	.alloc = rs_alloc,
-	.free = rs_free,
-	.alloc_sta = rs_alloc_sta,
-	.free_sta = rs_free_sta,
-#ifdef CONFIG_MAC80211_DEBUGFS
-	.add_sta_debugfs = rs_add_debugfs,
-	.remove_sta_debugfs = rs_remove_debugfs,
-#endif
-};
-
-int iwlagn_rate_control_register(void)
-{
-	return ieee80211_rate_control_register(&rs_ops);
-}
-
-void iwlagn_rate_control_unregister(void)
-{
-	ieee80211_rate_control_unregister(&rs_ops);
-}
-