diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2013-07-09 18:24:39 -0700 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2013-07-09 18:24:39 -0700 |
| commit | 496322bc91e35007ed754184dcd447a02b6dd685 (patch) | |
| tree | f5298d0a74c0a6e65c0e98050b594b8d020904c1 /drivers/net/wireless/ath/ath10k/wmi.h | |
| parent | 2e17c5a97e231f3cb426f4b7895eab5be5c5442e (diff) | |
| parent | 56e0ef527b184b3de2d7f88c6190812b2b2ac6bf (diff) | |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Miller:
"This is a re-do of the net-next pull request for the current merge
window. The only difference from the one I made the other day is that
this has Eliezer's interface renames and the timeout handling changes
made based upon your feedback, as well as a few bug fixes that have
trickeled in.
Highlights:
1) Low latency device polling, eliminating the cost of interrupt
handling and context switches. Allows direct polling of a network
device from socket operations, such as recvmsg() and poll().
Currently ixgbe, mlx4, and bnx2x support this feature.
Full high level description, performance numbers, and design in
commit 0a4db187a999 ("Merge branch 'll_poll'")
From Eliezer Tamir.
2) With the routing cache removed, ip_check_mc_rcu() gets exercised
more than ever before in the case where we have lots of multicast
addresses. Use a hash table instead of a simple linked list, from
Eric Dumazet.
3) Add driver for Atheros CQA98xx 802.11ac wireless devices, from
Bartosz Markowski, Janusz Dziedzic, Kalle Valo, Marek Kwaczynski,
Marek Puzyniak, Michal Kazior, and Sujith Manoharan.
4) Support reporting the TUN device persist flag to userspace, from
Pavel Emelyanov.
5) Allow controlling network device VF link state using netlink, from
Rony Efraim.
6) Support GRE tunneling in openvswitch, from Pravin B Shelar.
7) Adjust SOCK_MIN_RCVBUF and SOCK_MIN_SNDBUF for modern times, from
Daniel Borkmann and Eric Dumazet.
8) Allow controlling of TCP quickack behavior on a per-route basis,
from Cong Wang.
9) Several bug fixes and improvements to vxlan from Stephen
Hemminger, Pravin B Shelar, and Mike Rapoport. In particular,
support receiving on multiple UDP ports.
10) Major cleanups, particular in the area of debugging and cookie
lifetime handline, to the SCTP protocol code. From Daniel
Borkmann.
11) Allow packets to cross network namespaces when traversing tunnel
devices. From Nicolas Dichtel.
12) Allow monitoring netlink traffic via AF_PACKET sockets, in a
manner akin to how we monitor real network traffic via ptype_all.
From Daniel Borkmann.
13) Several bug fixes and improvements for the new alx device driver,
from Johannes Berg.
14) Fix scalability issues in the netem packet scheduler's time queue,
by using an rbtree. From Eric Dumazet.
15) Several bug fixes in TCP loss recovery handling, from Yuchung
Cheng.
16) Add support for GSO segmentation of MPLS packets, from Simon
Horman.
17) Make network notifiers have a real data type for the opaque
pointer that's passed into them. Use this to properly handle
network device flag changes in arp_netdev_event(). From Jiri
Pirko and Timo Teräs.
18) Convert several drivers over to module_pci_driver(), from Peter
Huewe.
19) tcp_fixup_rcvbuf() can loop 500 times over loopback, just use a
O(1) calculation instead. From Eric Dumazet.
20) Support setting of explicit tunnel peer addresses in ipv6, just
like ipv4. From Nicolas Dichtel.
21) Protect x86 BPF JIT against spraying attacks, from Eric Dumazet.
22) Prevent a single high rate flow from overruning an individual cpu
during RX packet processing via selective flow shedding. From
Willem de Bruijn.
23) Don't use spinlocks in TCP md5 signing fast paths, from Eric
Dumazet.
24) Don't just drop GSO packets which are above the TBF scheduler's
burst limit, chop them up so they are in-bounds instead. Also
from Eric Dumazet.
25) VLAN offloads are missed when configured on top of a bridge, fix
from Vlad Yasevich.
26) Support IPV6 in ping sockets. From Lorenzo Colitti.
27) Receive flow steering targets should be updated at poll() time
too, from David Majnemer.
28) Fix several corner case regressions in PMTU/redirect handling due
to the routing cache removal, from Timo Teräs.
29) We have to be mindful of ipv4 mapped ipv6 sockets in
upd_v6_push_pending_frames(). From Hannes Frederic Sowa.
30) Fix L2TP sequence number handling bugs, from James Chapman."
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1214 commits)
drivers/net: caif: fix wrong rtnl_is_locked() usage
drivers/net: enic: release rtnl_lock on error-path
vhost-net: fix use-after-free in vhost_net_flush
net: mv643xx_eth: do not use port number as platform device id
net: sctp: confirm route during forward progress
virtio_net: fix race in RX VQ processing
virtio: support unlocked queue poll
net/cadence/macb: fix bug/typo in extracting gem_irq_read_clear bit
Documentation: Fix references to defunct linux-net@vger.kernel.org
net/fs: change busy poll time accounting
net: rename low latency sockets functions to busy poll
bridge: fix some kernel warning in multicast timer
sfc: Fix memory leak when discarding scattered packets
sit: fix tunnel update via netlink
dt:net:stmmac: Add dt specific phy reset callback support.
dt:net:stmmac: Add support to dwmac version 3.610 and 3.710
dt:net:stmmac: Allocate platform data only if its NULL.
net:stmmac: fix memleak in the open method
ipv6: rt6_check_neigh should successfully verify neigh if no NUD information are available
net: ipv6: fix wrong ping_v6_sendmsg return value
...
Diffstat (limited to 'drivers/net/wireless/ath/ath10k/wmi.h')
| -rw-r--r-- | drivers/net/wireless/ath/ath10k/wmi.h | 3052 |
1 files changed, 3052 insertions, 0 deletions
diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h new file mode 100644 index 000000000000..9555f5a0e041 --- /dev/null +++ b/drivers/net/wireless/ath/ath10k/wmi.h @@ -0,0 +1,3052 @@ +/* + * Copyright (c) 2005-2011 Atheros Communications Inc. + * Copyright (c) 2011-2013 Qualcomm Atheros, Inc. + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#ifndef _WMI_H_ +#define _WMI_H_ + +#include <linux/types.h> +#include <net/mac80211.h> + +/* + * This file specifies the WMI interface for the Unified Software + * Architecture. + * + * It includes definitions of all the commands and events. Commands are + * messages from the host to the target. Events and Replies are messages + * from the target to the host. + * + * Ownership of correctness in regards to WMI commands belongs to the host + * driver and the target is not required to validate parameters for value, + * proper range, or any other checking. + * + * Guidelines for extending this interface are below. + * + * 1. Add new WMI commands ONLY within the specified range - 0x9000 - 0x9fff + * + * 2. Use ONLY u32 type for defining member variables within WMI + * command/event structures. Do not use u8, u16, bool or + * enum types within these structures. + * + * 3. DO NOT define bit fields within structures. Implement bit fields + * using masks if necessary. Do not use the programming language's bit + * field definition. + * + * 4. Define macros for encode/decode of u8, u16 fields within + * the u32 variables. Use these macros for set/get of these fields. + * Try to use this to optimize the structure without bloating it with + * u32 variables for every lower sized field. + * + * 5. Do not use PACK/UNPACK attributes for the structures as each member + * variable is already 4-byte aligned by virtue of being a u32 + * type. + * + * 6. Comment each parameter part of the WMI command/event structure by + * using the 2 stars at the begining of C comment instead of one star to + * enable HTML document generation using Doxygen. + * + */ + +/* Control Path */ +struct wmi_cmd_hdr { + __le32 cmd_id; +} __packed; + +#define WMI_CMD_HDR_CMD_ID_MASK 0x00FFFFFF +#define WMI_CMD_HDR_CMD_ID_LSB 0 +#define WMI_CMD_HDR_PLT_PRIV_MASK 0xFF000000 +#define WMI_CMD_HDR_PLT_PRIV_LSB 24 + +#define HTC_PROTOCOL_VERSION 0x0002 +#define WMI_PROTOCOL_VERSION 0x0002 + +enum wmi_service_id { + WMI_SERVICE_BEACON_OFFLOAD = 0, /* beacon offload */ + WMI_SERVICE_SCAN_OFFLOAD, /* scan offload */ + WMI_SERVICE_ROAM_OFFLOAD, /* roam offload */ + WMI_SERVICE_BCN_MISS_OFFLOAD, /* beacon miss offload */ + WMI_SERVICE_STA_PWRSAVE, /* fake sleep + basic power save */ + WMI_SERVICE_STA_ADVANCED_PWRSAVE, /* uapsd, pspoll, force sleep */ + WMI_SERVICE_AP_UAPSD, /* uapsd on AP */ + WMI_SERVICE_AP_DFS, /* DFS on AP */ + WMI_SERVICE_11AC, /* supports 11ac */ + WMI_SERVICE_BLOCKACK, /* Supports triggering ADDBA/DELBA from host*/ + WMI_SERVICE_PHYERR, /* PHY error */ + WMI_SERVICE_BCN_FILTER, /* Beacon filter support */ + WMI_SERVICE_RTT, /* RTT (round trip time) support */ + WMI_SERVICE_RATECTRL, /* Rate-control */ + WMI_SERVICE_WOW, /* WOW Support */ + WMI_SERVICE_RATECTRL_CACHE, /* Rate-control caching */ + WMI_SERVICE_IRAM_TIDS, /* TIDs in IRAM */ + WMI_SERVICE_ARPNS_OFFLOAD, /* ARP NS Offload support */ + WMI_SERVICE_NLO, /* Network list offload service */ + WMI_SERVICE_GTK_OFFLOAD, /* GTK offload */ + WMI_SERVICE_SCAN_SCH, /* Scan Scheduler Service */ + WMI_SERVICE_CSA_OFFLOAD, /* CSA offload service */ + WMI_SERVICE_CHATTER, /* Chatter service */ + WMI_SERVICE_COEX_FREQAVOID, /* FW report freq range to avoid */ + WMI_SERVICE_PACKET_POWER_SAVE, /* packet power save service */ + WMI_SERVICE_FORCE_FW_HANG, /* To test fw recovery mechanism */ + WMI_SERVICE_GPIO, /* GPIO service */ + WMI_SERVICE_STA_DTIM_PS_MODULATED_DTIM, /* Modulated DTIM support */ + WMI_STA_UAPSD_BASIC_AUTO_TRIG, /* UAPSD AC Trigger Generation */ + WMI_STA_UAPSD_VAR_AUTO_TRIG, /* -do- */ + WMI_SERVICE_STA_KEEP_ALIVE, /* STA keep alive mechanism support */ + WMI_SERVICE_TX_ENCAP, /* Packet type for TX encapsulation */ + + WMI_SERVICE_LAST, + WMI_MAX_SERVICE = 64 /* max service */ +}; + +static inline char *wmi_service_name(int service_id) +{ + switch (service_id) { + case WMI_SERVICE_BEACON_OFFLOAD: + return "BEACON_OFFLOAD"; + case WMI_SERVICE_SCAN_OFFLOAD: + return "SCAN_OFFLOAD"; + case WMI_SERVICE_ROAM_OFFLOAD: + return "ROAM_OFFLOAD"; + case WMI_SERVICE_BCN_MISS_OFFLOAD: + return "BCN_MISS_OFFLOAD"; + case WMI_SERVICE_STA_PWRSAVE: + return "STA_PWRSAVE"; + case WMI_SERVICE_STA_ADVANCED_PWRSAVE: + return "STA_ADVANCED_PWRSAVE"; + case WMI_SERVICE_AP_UAPSD: + return "AP_UAPSD"; + case WMI_SERVICE_AP_DFS: + return "AP_DFS"; + case WMI_SERVICE_11AC: + return "11AC"; + case WMI_SERVICE_BLOCKACK: + return "BLOCKACK"; + case WMI_SERVICE_PHYERR: + return "PHYERR"; + case WMI_SERVICE_BCN_FILTER: + return "BCN_FILTER"; + case WMI_SERVICE_RTT: + return "RTT"; + case WMI_SERVICE_RATECTRL: + return "RATECTRL"; + case WMI_SERVICE_WOW: + return "WOW"; + case WMI_SERVICE_RATECTRL_CACHE: + return "RATECTRL CACHE"; + case WMI_SERVICE_IRAM_TIDS: + return "IRAM TIDS"; + case WMI_SERVICE_ARPNS_OFFLOAD: + return "ARPNS_OFFLOAD"; + case WMI_SERVICE_NLO: + return "NLO"; + case WMI_SERVICE_GTK_OFFLOAD: + return "GTK_OFFLOAD"; + case WMI_SERVICE_SCAN_SCH: + return "SCAN_SCH"; + case WMI_SERVICE_CSA_OFFLOAD: + return "CSA_OFFLOAD"; + case WMI_SERVICE_CHATTER: + return "CHATTER"; + case WMI_SERVICE_COEX_FREQAVOID: + return "COEX_FREQAVOID"; + case WMI_SERVICE_PACKET_POWER_SAVE: + return "PACKET_POWER_SAVE"; + case WMI_SERVICE_FORCE_FW_HANG: + return "FORCE FW HANG"; + case WMI_SERVICE_GPIO: + return "GPIO"; + case WMI_SERVICE_STA_DTIM_PS_MODULATED_DTIM: + return "MODULATED DTIM"; + case WMI_STA_UAPSD_BASIC_AUTO_TRIG: + return "BASIC UAPSD"; + case WMI_STA_UAPSD_VAR_AUTO_TRIG: + return "VAR UAPSD"; + case WMI_SERVICE_STA_KEEP_ALIVE: + return "STA KEEP ALIVE"; + case WMI_SERVICE_TX_ENCAP: + return "TX ENCAP"; + default: + return "UNKNOWN SERVICE\n"; + } +} + + +#define WMI_SERVICE_BM_SIZE \ + ((WMI_MAX_SERVICE + sizeof(u32) - 1)/sizeof(u32)) + +/* 2 word representation of MAC addr */ +struct wmi_mac_addr { + union { + u8 addr[6]; + struct { + u32 word0; + u32 word1; + } __packed; + } __packed; +} __packed; + +/* macro to convert MAC address from WMI word format to char array */ +#define WMI_MAC_ADDR_TO_CHAR_ARRAY(pwmi_mac_addr, c_macaddr) do { \ + (c_macaddr)[0] = ((pwmi_mac_addr)->word0) & 0xff; \ + (c_macaddr)[1] = (((pwmi_mac_addr)->word0) >> 8) & 0xff; \ + (c_macaddr)[2] = (((pwmi_mac_addr)->word0) >> 16) & 0xff; \ + (c_macaddr)[3] = (((pwmi_mac_addr)->word0) >> 24) & 0xff; \ + (c_macaddr)[4] = ((pwmi_mac_addr)->word1) & 0xff; \ + (c_macaddr)[5] = (((pwmi_mac_addr)->word1) >> 8) & 0xff; \ + } while (0) + +/* + * wmi command groups. + */ +enum wmi_cmd_group { + /* 0 to 2 are reserved */ + WMI_GRP_START = 0x3, + WMI_GRP_SCAN = WMI_GRP_START, + WMI_GRP_PDEV, + WMI_GRP_VDEV, + WMI_GRP_PEER, + WMI_GRP_MGMT, + WMI_GRP_BA_NEG, + WMI_GRP_STA_PS, + WMI_GRP_DFS, + WMI_GRP_ROAM, + WMI_GRP_OFL_SCAN, + WMI_GRP_P2P, + WMI_GRP_AP_PS, + WMI_GRP_RATE_CTRL, + WMI_GRP_PROFILE, + WMI_GRP_SUSPEND, + WMI_GRP_BCN_FILTER, + WMI_GRP_WOW, + WMI_GRP_RTT, + WMI_GRP_SPECTRAL, + WMI_GRP_STATS, + WMI_GRP_ARP_NS_OFL, + WMI_GRP_NLO_OFL, + WMI_GRP_GTK_OFL, + WMI_GRP_CSA_OFL, + WMI_GRP_CHATTER, + WMI_GRP_TID_ADDBA, + WMI_GRP_MISC, + WMI_GRP_GPIO, +}; + +#define WMI_CMD_GRP(grp_id) (((grp_id) << 12) | 0x1) +#define WMI_EVT_GRP_START_ID(grp_id) (((grp_id) << 12) | 0x1) + +/* Command IDs and commande events. */ +enum wmi_cmd_id { + WMI_INIT_CMDID = 0x1, + + /* Scan specific commands */ + WMI_START_SCAN_CMDID = WMI_CMD_GRP(WMI_GRP_SCAN), + WMI_STOP_SCAN_CMDID, + WMI_SCAN_CHAN_LIST_CMDID, + WMI_SCAN_SCH_PRIO_TBL_CMDID, + + /* PDEV (physical device) specific commands */ + WMI_PDEV_SET_REGDOMAIN_CMDID = WMI_CMD_GRP(WMI_GRP_PDEV), + WMI_PDEV_SET_CHANNEL_CMDID, + WMI_PDEV_SET_PARAM_CMDID, + WMI_PDEV_PKTLOG_ENABLE_CMDID, + WMI_PDEV_PKTLOG_DISABLE_CMDID, + WMI_PDEV_SET_WMM_PARAMS_CMDID, + WMI_PDEV_SET_HT_CAP_IE_CMDID, + WMI_PDEV_SET_VHT_CAP_IE_CMDID, + WMI_PDEV_SET_DSCP_TID_MAP_CMDID, + WMI_PDEV_SET_QUIET_MODE_CMDID, + WMI_PDEV_GREEN_AP_PS_ENABLE_CMDID, + WMI_PDEV_GET_TPC_CONFIG_CMDID, + WMI_PDEV_SET_BASE_MACADDR_CMDID, + + /* VDEV (virtual device) specific commands */ + WMI_VDEV_CREATE_CMDID = WMI_CMD_GRP(WMI_GRP_VDEV), + WMI_VDEV_DELETE_CMDID, + WMI_VDEV_START_REQUEST_CMDID, + WMI_VDEV_RESTART_REQUEST_CMDID, + WMI_VDEV_UP_CMDID, + WMI_VDEV_STOP_CMDID, + WMI_VDEV_DOWN_CMDID, + WMI_VDEV_SET_PARAM_CMDID, + WMI_VDEV_INSTALL_KEY_CMDID, + + /* peer specific commands */ + WMI_PEER_CREATE_CMDID = WMI_CMD_GRP(WMI_GRP_PEER), + WMI_PEER_DELETE_CMDID, + WMI_PEER_FLUSH_TIDS_CMDID, + WMI_PEER_SET_PARAM_CMDID, + WMI_PEER_ASSOC_CMDID, + WMI_PEER_ADD_WDS_ENTRY_CMDID, + WMI_PEER_REMOVE_WDS_ENTRY_CMDID, + WMI_PEER_MCAST_GROUP_CMDID, + + /* beacon/management specific commands */ + WMI_BCN_TX_CMDID = WMI_CMD_GRP(WMI_GRP_MGMT), + WMI_PDEV_SEND_BCN_CMDID, + WMI_BCN_TMPL_CMDID, + WMI_BCN_FILTER_RX_CMDID, + WMI_PRB_REQ_FILTER_RX_CMDID, + WMI_MGMT_TX_CMDID, + WMI_PRB_TMPL_CMDID, + + /* commands to directly control BA negotiation directly from host. */ + WMI_ADDBA_CLEAR_RESP_CMDID = WMI_CMD_GRP(WMI_GRP_BA_NEG), + WMI_ADDBA_SEND_CMDID, + WMI_ADDBA_STATUS_CMDID, + WMI_DELBA_SEND_CMDID, + WMI_ADDBA_SET_RESP_CMDID, + WMI_SEND_SINGLEAMSDU_CMDID, + + /* Station power save specific config */ + WMI_STA_POWERSAVE_MODE_CMDID = WMI_CMD_GRP(WMI_GRP_STA_PS), + WMI_STA_POWERSAVE_PARAM_CMDID, + WMI_STA_MIMO_PS_MODE_CMDID, + + /** DFS-specific commands */ + WMI_PDEV_DFS_ENABLE_CMDID = WMI_CMD_GRP(WMI_GRP_DFS), + WMI_PDEV_DFS_DISABLE_CMDID, + + /* Roaming specific commands */ + WMI_ROAM_SCAN_MODE = WMI_CMD_GRP(WMI_GRP_ROAM), + WMI_ROAM_SCAN_RSSI_THRESHOLD, + WMI_ROAM_SCAN_PERIOD, + WMI_ROAM_SCAN_RSSI_CHANGE_THRESHOLD, + WMI_ROAM_AP_PROFILE, + + /* offload scan specific commands */ + WMI_OFL_SCAN_ADD_AP_PROFILE = WMI_CMD_GRP(WMI_GRP_OFL_SCAN), + WMI_OFL_SCAN_REMOVE_AP_PROFILE, + WMI_OFL_SCAN_PERIOD, + + /* P2P specific commands */ + WMI_P2P_DEV_SET_DEVICE_INFO = WMI_CMD_GRP(WMI_GRP_P2P), + WMI_P2P_DEV_SET_DISCOVERABILITY, + WMI_P2P_GO_SET_BEACON_IE, + WMI_P2P_GO_SET_PROBE_RESP_IE, + WMI_P2P_SET_VENDOR_IE_DATA_CMDID, + + /* AP power save specific config */ + WMI_AP_PS_PEER_PARAM_CMDID = WMI_CMD_GRP(WMI_GRP_AP_PS), + WMI_AP_PS_PEER_UAPSD_COEX_CMDID, + + /* Rate-control specific commands */ + WMI_PEER_RATE_RETRY_SCHED_CMDID = + WMI_CMD_GRP(WMI_GRP_RATE_CTRL), + + /* WLAN Profiling commands. */ + WMI_WLAN_PROFILE_TRIGGER_CMDID = WMI_CMD_GRP(WMI_GRP_PROFILE), + WMI_WLAN_PROFILE_SET_HIST_INTVL_CMDID, + WMI_WLAN_PROFILE_GET_PROFILE_DATA_CMDID, + WMI_WLAN_PROFILE_ENABLE_PROFILE_ID_CMDID, + WMI_WLAN_PROFILE_LIST_PROFILE_ID_CMDID, + + /* Suspend resume command Ids */ + WMI_PDEV_SUSPEND_CMDID = WMI_CMD_GRP(WMI_GRP_SUSPEND), + WMI_PDEV_RESUME_CMDID, + + /* Beacon filter commands */ + WMI_ADD_BCN_FILTER_CMDID = WMI_CMD_GRP(WMI_GRP_BCN_FILTER), + WMI_RMV_BCN_FILTER_CMDID, + + /* WOW Specific WMI commands*/ + WMI_WOW_ADD_WAKE_PATTERN_CMDID = WMI_CMD_GRP(WMI_GRP_WOW), + WMI_WOW_DEL_WAKE_PATTERN_CMDID, + WMI_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID, + WMI_WOW_ENABLE_CMDID, + WMI_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID, + + /* RTT measurement related cmd */ + WMI_RTT_MEASREQ_CMDID = WMI_CMD_GRP(WMI_GRP_RTT), + WMI_RTT_TSF_CMDID, + + /* spectral scan commands */ + WMI_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID = WMI_CMD_GRP(WMI_GRP_SPECTRAL), + WMI_VDEV_SPECTRAL_SCAN_ENABLE_CMDID, + + /* F/W stats */ + WMI_REQUEST_STATS_CMDID = WMI_CMD_GRP(WMI_GRP_STATS), + + /* ARP OFFLOAD REQUEST*/ + WMI_SET_ARP_NS_OFFLOAD_CMDID = WMI_CMD_GRP(WMI_GRP_ARP_NS_OFL), + + /* NS offload confid*/ + WMI_NETWORK_LIST_OFFLOAD_CONFIG_CMDID = WMI_CMD_GRP(WMI_GRP_NLO_OFL), + + /* GTK offload Specific WMI commands*/ + WMI_GTK_OFFLOAD_CMDID = WMI_CMD_GRP(WMI_GRP_GTK_OFL), + + /* CSA offload Specific WMI commands*/ + WMI_CSA_OFFLOAD_ENABLE_CMDID = WMI_CMD_GRP(WMI_GRP_CSA_OFL), + WMI_CSA_OFFLOAD_CHANSWITCH_CMDID, + + /* Chatter commands*/ + WMI_CHATTER_SET_MODE_CMDID = WMI_CMD_GRP(WMI_GRP_CHATTER), + + /* addba specific commands */ + WMI_PEER_TID_ADDBA_CMDID = WMI_CMD_GRP(WMI_GRP_TID_ADDBA), + WMI_PEER_TID_DELBA_CMDID, + + /* set station mimo powersave method */ + WMI_STA_DTIM_PS_METHOD_CMDID, + /* Configure the Station UAPSD AC Auto Trigger Parameters */ + WMI_STA_UAPSD_AUTO_TRIG_CMDID, + + /* STA Keep alive parameter configuration, + Requires WMI_SERVICE_STA_KEEP_ALIVE */ + WMI_STA_KEEPALIVE_CMD, + + /* misc command group */ + WMI_ECHO_CMDID = WMI_CMD_GRP(WMI_GRP_MISC), + WMI_PDEV_UTF_CMDID, + WMI_DBGLOG_CFG_CMDID, + WMI_PDEV_QVIT_CMDID, + WMI_PDEV_FTM_INTG_CMDID, + WMI_VDEV_SET_KEEPALIVE_CMDID, + WMI_VDEV_GET_KEEPALIVE_CMDID, + + /* GPIO Configuration */ + WMI_GPIO_CONFIG_CMDID = WMI_CMD_GRP(WMI_GRP_GPIO), + WMI_GPIO_OUTPUT_CMDID, +}; + +enum wmi_event_id { + WMI_SERVICE_READY_EVENTID = 0x1, + WMI_READY_EVENTID, + + /* Scan specific events */ + WMI_SCAN_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_SCAN), + + /* PDEV specific events */ + WMI_PDEV_TPC_CONFIG_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_PDEV), + WMI_CHAN_INFO_EVENTID, + WMI_PHYERR_EVENTID, + + /* VDEV specific events */ + WMI_VDEV_START_RESP_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_VDEV), + WMI_VDEV_STOPPED_EVENTID, + WMI_VDEV_INSTALL_KEY_COMPLETE_EVENTID, + + /* peer specific events */ + WMI_PEER_STA_KICKOUT_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_PEER), + + /* beacon/mgmt specific events */ + WMI_MGMT_RX_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_MGMT), + WMI_HOST_SWBA_EVENTID, + WMI_TBTTOFFSET_UPDATE_EVENTID, + + /* ADDBA Related WMI Events*/ + WMI_TX_DELBA_COMPLETE_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_BA_NEG), + WMI_TX_ADDBA_COMPLETE_EVENTID, + + /* Roam event to trigger roaming on host */ + WMI_ROAM_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_ROAM), + WMI_PROFILE_MATCH, + + /* WoW */ + WMI_WOW_WAKEUP_HOST_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_WOW), + + /* RTT */ + WMI_RTT_MEASUREMENT_REPORT_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_RTT), + WMI_TSF_MEASUREMENT_REPORT_EVENTID, + WMI_RTT_ERROR_REPORT_EVENTID, + + /* GTK offload */ + WMI_GTK_OFFLOAD_STATUS_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_GTK_OFL), + WMI_GTK_REKEY_FAIL_EVENTID, + + /* CSA IE received event */ + WMI_CSA_HANDLING_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_CSA_OFL), + + /* Misc events */ + WMI_ECHO_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_MISC), + WMI_PDEV_UTF_EVENTID, + WMI_DEBUG_MESG_EVENTID, + WMI_UPDATE_STATS_EVENTID, + WMI_DEBUG_PRINT_EVENTID, + WMI_DCS_INTERFERENCE_EVENTID, + WMI_PDEV_QVIT_EVENTID, + WMI_WLAN_PROFILE_DATA_EVENTID, + WMI_PDEV_FTM_INTG_EVENTID, + WMI_WLAN_FREQ_AVOID_EVENTID, + WMI_VDEV_GET_KEEPALIVE_EVENTID, + + /* GPIO Event */ + WMI_GPIO_INPUT_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_GPIO), +}; + +enum wmi_phy_mode { + MODE_11A = 0, /* 11a Mode */ + MODE_11G = 1, /* 11b/g Mode */ + MODE_11B = 2, /* 11b Mode */ + MODE_11GONLY = 3, /* 11g only Mode */ + MODE_11NA_HT20 = 4, /* 11a HT20 mode */ + MODE_11NG_HT20 = 5, /* 11g HT20 mode */ + MODE_11NA_HT40 = 6, /* 11a HT40 mode */ + MODE_11NG_HT40 = 7, /* 11g HT40 mode */ + MODE_11AC_VHT20 = 8, + MODE_11AC_VHT40 = 9, + MODE_11AC_VHT80 = 10, + /* MODE_11AC_VHT160 = 11, */ + MODE_11AC_VHT20_2G = 11, + MODE_11AC_VHT40_2G = 12, + MODE_11AC_VHT80_2G = 13, + MODE_UNKNOWN = 14, + MODE_MAX = 14 +}; + +#define WMI_CHAN_LIST_TAG 0x1 +#define WMI_SSID_LIST_TAG 0x2 +#define WMI_BSSID_LIST_TAG 0x3 +#define WMI_IE_TAG 0x4 + +struct wmi_channel { + __le32 mhz; + __le32 band_center_freq1; + __le32 band_center_freq2; /* valid for 11ac, 80plus80 */ + union { + __le32 flags; /* WMI_CHAN_FLAG_ */ + struct { + u8 mode; /* only 6 LSBs */ + } __packed; + } __packed; + union { + __le32 reginfo0; + struct { + u8 min_power; + u8 max_power; + u8 reg_power; + u8 reg_classid; + } __packed; + } __packed; + union { + __le32 reginfo1; + struct { + u8 antenna_max; + } __packed; + } __packed; +} __packed; + +struct wmi_channel_arg { + u32 freq; + u32 band_center_freq1; + bool passive; + bool allow_ibss; + bool allow_ht; + bool allow_vht; + bool ht40plus; + /* note: power unit is 1/4th of dBm */ + u32 min_power; + u32 max_power; + u32 max_reg_power; + u32 max_antenna_gain; + u32 reg_class_id; + enum wmi_phy_mode mode; +}; + +enum wmi_channel_change_cause { + WMI_CHANNEL_CHANGE_CAUSE_NONE = 0, + WMI_CHANNEL_CHANGE_CAUSE_CSA, +}; + +#define WMI_CHAN_FLAG_HT40_PLUS (1 << 6) +#define WMI_CHAN_FLAG_PASSIVE (1 << 7) +#define WMI_CHAN_FLAG_ADHOC_ALLOWED (1 << 8) +#define WMI_CHAN_FLAG_AP_DISABLED (1 << 9) +#define WMI_CHAN_FLAG_DFS (1 << 10) +#define WMI_CHAN_FLAG_ALLOW_HT (1 << 11) +#define WMI_CHAN_FLAG_ALLOW_VHT (1 << 12) + +/* Indicate reason for channel switch */ +#define WMI_CHANNEL_CHANGE_CAUSE_CSA (1 << 13) + +#define WMI_MAX_SPATIAL_STREAM 3 + +/* HT Capabilities*/ +#define WMI_HT_CAP_ENABLED 0x0001 /* HT Enabled/ disabled */ +#define WMI_HT_CAP_HT20_SGI 0x0002 /* Short Guard Interval with HT20 */ +#define WMI_HT_CAP_DYNAMIC_SMPS 0x0004 /* Dynamic MIMO powersave */ +#define WMI_HT_CAP_TX_STBC 0x0008 /* B3 TX STBC */ +#define WMI_HT_CAP_TX_STBC_MASK_SHIFT 3 +#define WMI_HT_CAP_RX_STBC 0x0030 /* B4-B5 RX STBC */ +#define WMI_HT_CAP_RX_STBC_MASK_SHIFT 4 +#define WMI_HT_CAP_LDPC 0x0040 /* LDPC supported */ +#define WMI_HT_CAP_L_SIG_TXOP_PROT 0x0080 /* L-SIG TXOP Protection */ +#define WMI_HT_CAP_MPDU_DENSITY 0x0700 /* MPDU Density */ +#define WMI_HT_CAP_MPDU_DENSITY_MASK_SHIFT 8 +#define WMI_HT_CAP_HT40_SGI 0x0800 + +#define WMI_HT_CAP_DEFAULT_ALL (WMI_HT_CAP_ENABLED | \ + WMI_HT_CAP_HT20_SGI | \ + WMI_HT_CAP_HT40_SGI | \ + WMI_HT_CAP_TX_STBC | \ + WMI_HT_CAP_RX_STBC | \ + WMI_HT_CAP_LDPC) + + +/* + * WMI_VHT_CAP_* these maps to ieee 802.11ac vht capability information + * field. The fields not defined here are not supported, or reserved. + * Do not change these masks and if you have to add new one follow the + * bitmask as specified by 802.11ac draft. + */ + +#define WMI_VHT_CAP_MAX_MPDU_LEN_MASK 0x00000003 +#define WMI_VHT_CAP_RX_LDPC 0x00000010 +#define WMI_VHT_CAP_SGI_80MHZ 0x00000020 +#define WMI_VHT_CAP_TX_STBC 0x00000080 +#define WMI_VHT_CAP_RX_STBC_MASK 0x00000300 +#define WMI_VHT_CAP_RX_STBC_MASK_SHIFT 8 +#define WMI_VHT_CAP_MAX_AMPDU_LEN_EXP 0x03800000 +#define WMI_VHT_CAP_MAX_AMPDU_LEN_EXP_SHIFT 23 +#define WMI_VHT_CAP_RX_FIXED_ANT 0x10000000 +#define WMI_VHT_CAP_TX_FIXED_ANT 0x20000000 + +/* The following also refer for max HT AMSDU */ +#define WMI_VHT_CAP_MAX_MPDU_LEN_3839 0x00000000 +#define WMI_VHT_CAP_MAX_MPDU_LEN_7935 0x00000001 +#define WMI_VHT_CAP_MAX_MPDU_LEN_11454 0x00000002 + +#define WMI_VHT_CAP_DEFAULT_ALL (WMI_VHT_CAP_MAX_MPDU_LEN_11454 | \ + WMI_VHT_CAP_RX_LDPC | \ + WMI_VHT_CAP_SGI_80MHZ | \ + WMI_VHT_CAP_TX_STBC | \ + WMI_VHT_CAP_RX_STBC_MASK | \ + WMI_VHT_CAP_MAX_AMPDU_LEN_EXP | \ + WMI_VHT_CAP_RX_FIXED_ANT | \ + WMI_VHT_CAP_TX_FIXED_ANT) + +/* + * Interested readers refer to Rx/Tx MCS Map definition as defined in + * 802.11ac + */ +#define WMI_VHT_MAX_MCS_4_SS_MASK(r, ss) ((3 & (r)) << (((ss) - 1) << 1)) +#define WMI_VHT_MAX_SUPP_RATE_MASK 0x1fff0000 +#define WMI_VHT_MAX_SUPP_RATE_MASK_SHIFT 16 + +enum { + REGDMN_MODE_11A = 0x00001, /* 11a channels */ + REGDMN_MODE_TURBO = 0x00002, /* 11a turbo-only channels */ + REGDMN_MODE_11B = 0x00004, /* 11b channels */ + REGDMN_MODE_PUREG = 0x00008, /* 11g channels (OFDM only) */ + REGDMN_MODE_11G = 0x00008, /* XXX historical */ + REGDMN_MODE_108G = 0x00020, /* 11a+Turbo channels */ + REGDMN_MODE_108A = 0x00040, /* 11g+Turbo channels */ + REGDMN_MODE_XR = 0x00100, /* XR channels */ + REGDMN_MODE_11A_HALF_RATE = 0x00200, /* 11A half rate channels */ + REGDMN_MODE_11A_QUARTER_RATE = 0x00400, /* 11A quarter rate channels */ + REGDMN_MODE_11NG_HT20 = 0x00800, /* 11N-G HT20 channels */ + REGDMN_MODE_11NA_HT20 = 0x01000, /* 11N-A HT20 channels */ + REGDMN_MODE_11NG_HT40PLUS = 0x02000, /* 11N-G HT40 + channels */ + REGDMN_MODE_11NG_HT40MINUS = 0x04000, /* 11N-G HT40 - channels */ + REGDMN_MODE_11NA_HT40PLUS = 0x08000, /* 11N-A HT40 + channels */ + REGDMN_MODE_11NA_HT40MINUS = 0x10000, /* 11N-A HT40 - channels */ + REGDMN_MODE_11AC_VHT20 = 0x20000, /* 5Ghz, VHT20 */ + REGDMN_MODE_11AC_VHT40PLUS = 0x40000, /* 5Ghz, VHT40 + channels */ + REGDMN_MODE_11AC_VHT40MINUS = 0x80000, /* 5Ghz VHT40 - channels */ + REGDMN_MODE_11AC_VHT80 = 0x100000, /* 5Ghz, VHT80 channels */ + REGDMN_MODE_ALL = 0xffffffff +}; + +#define REGDMN_CAP1_CHAN_HALF_RATE 0x00000001 +#define REGDMN_CAP1_CHAN_QUARTER_RATE 0x00000002 +#define REGDMN_CAP1_CHAN_HAL49GHZ 0x00000004 + +/* regulatory capabilities */ +#define REGDMN_EEPROM_EEREGCAP_EN_FCC_MIDBAND 0x0040 +#define REGDMN_EEPROM_EEREGCAP_EN_KK_U1_EVEN 0x0080 +#define REGDMN_EEPROM_EEREGCAP_EN_KK_U2 0x0100 +#define REGDMN_EEPROM_EEREGCAP_EN_KK_MIDBAND 0x0200 +#define REGDMN_EEPROM_EEREGCAP_EN_KK_U1_ODD 0x0400 +#define REGDMN_EEPROM_EEREGCAP_EN_KK_NEW_11A 0x0800 + +struct hal_reg_capabilities { + /* regdomain value specified in EEPROM */ + __le32 eeprom_rd; + /*regdomain */ + __le32 eeprom_rd_ext; + /* CAP1 capabilities bit map. */ + __le32 regcap1; + /* REGDMN EEPROM CAP. */ + __le32 regcap2; + /* REGDMN MODE */ + __le32 wireless_modes; + __le32 low_2ghz_chan; + __le32 high_2ghz_chan; + __le32 low_5ghz_chan; + __le32 high_5ghz_chan; +} __packed; + +enum wlan_mode_capability { + WHAL_WLAN_11A_CAPABILITY = 0x1, + WHAL_WLAN_11G_CAPABILITY = 0x2, + WHAL_WLAN_11AG_CAPABILITY = 0x3, +}; + +/* structure used by FW for requesting host memory */ +struct wlan_host_mem_req { + /* ID of the request */ + __le32 req_id; + /* size of the of each unit */ + __le32 unit_size; + /* flags to indicate that + * the number units is dependent + * on number of resources(num vdevs num peers .. etc) + */ + __le32 num_unit_info; + /* + * actual number of units to allocate . if flags in the num_unit_info + * indicate that number of units is tied to number of a particular + * resource to allocate then num_units filed is set to 0 and host + * will derive the number units from number of the resources it is + * requesting. + */ + __le32 num_units; +} __packed; + +#define WMI_SERVICE_IS_ENABLED(wmi_svc_bmap, svc_id) \ + ((((wmi_svc_bmap)[(svc_id)/(sizeof(u32))]) & \ + (1 << ((svc_id)%(sizeof(u32))))) != 0) + +/* + * The following struct holds optional payload for + * wmi_service_ready_event,e.g., 11ac pass some of the + * device capability to the host. + */ +struct wmi_service_ready_event { + __le32 sw_version; + __le32 sw_version_1; + __le32 abi_version; + /* WMI_PHY_CAPABILITY */ + __le32 phy_capability; + /* Maximum number of frag table entries that SW will populate less 1 */ + __le32 max_frag_entry; + __le32 wmi_service_bitmap[WMI_SERVICE_BM_SIZE]; + __le32 num_rf_chains; + /* + * The following field is only valid for service type + * WMI_SERVICE_11AC + */ + __le32 ht_cap_info; /* WMI HT Capability */ + __le32 vht_cap_info; /* VHT capability info field of 802.11ac */ + __le32 vht_supp_mcs; /* VHT Supported MCS Set field Rx/Tx same */ + __le32 hw_min_tx_power; + __le32 hw_max_tx_power; + struct hal_reg_capabilities hal_reg_capabilities; + __le32 sys_cap_info; + __le32 min_pkt_size_enable; /* Enterprise mode short pkt enable */ + /* + * Max beacon and Probe Response IE offload size + * (includes optional P2P IEs) + */ + __le32 max_bcn_ie_size; + /* + * request to host to allocate a chuck of memory and pss it down to FW + * via WM_INIT. FW uses this as FW extesnsion memory for saving its + * data structures. Only valid for low latency interfaces like PCIE + * where FW can access this memory directly (or) by DMA. + */ + __le32 num_mem_reqs; + struct wlan_host_mem_req mem_reqs[1]; +} __packed; + +/* + * status consists of upper 16 bits fo int status and lower 16 bits of + * module ID that retuned status + */ +#define WLAN_INIT_STATUS_SUCCESS 0x0 +#define WLAN_GET_INIT_STATUS_REASON(status) ((status) & 0xffff) +#define WLAN_GET_INIT_STATUS_MODULE_ID(status) (((status) >> 16) & 0xffff) + +#define WMI_SERVICE_READY_TIMEOUT_HZ (5*HZ) +#define WMI_UNIFIED_READY_TIMEOUT_HZ (5*HZ) + +struct wmi_ready_event { + __le32 sw_version; + __le32 abi_version; + struct wmi_mac_addr mac_addr; + __le32 status; +} __packed; + +struct wmi_resource_config { + /* number of virtual devices (VAPs) to support */ + __le32 num_vdevs; + + /* number of peer nodes to support */ + __le32 num_peers; + + /* + * In offload mode target supports features like WOW, chatter and + * other protocol offloads. In order to support them some + * functionalities like reorder buffering, PN checking need to be + * done in target. This determines maximum number of peers suported + * by target in offload mode + */ + __le32 num_offload_peers; + + /* For target-based RX reordering */ + __le32 num_offload_reorder_bufs; + + /* number of keys per peer */ + __le32 num_peer_keys; + + /* total number of TX/RX data TIDs */ + __le32 num_tids; + + /* + * max skid for resolving hash collisions + * + * The address search table is sparse, so that if two MAC addresses + * result in the same hash value, the second of these conflicting + * entries can slide to the next index in the address search table, + * and use it, if it is unoccupied. This ast_skid_limit parameter + * specifies the upper bound on how many subsequent indices to search + * over to find an unoccupied space. + */ + __le32 ast_skid_limit; + + /* + * the nominal chain mask for transmit + * + * The chain mask may be modified dynamically, e.g. to operate AP + * tx with a reduced number of chains if no clients are associated. + * This configuration parameter specifies the nominal chain-mask that + * should be used when not operating with a reduced set of tx chains. + */ + __le32 tx_chain_mask; + + /* + * the nominal chain mask for receive + * + * The chain mask may be modified dynamically, e.g. for a client + * to use a reduced number of chains for receive if the traffic to + * the client is low enough that it doesn't require downlink MIMO + * or antenna diversity. + * This configuration parameter specifies the nominal chain-mask that + * should be used when not operating with a reduced set of rx chains. + */ + __le32 rx_chain_mask; + + /* + * what rx reorder timeout (ms) to use for the AC + * + * Each WMM access class (voice, video, best-effort, background) will + * have its own timeout value to dictate how long to wait for missing + * rx MPDUs to arrive before flushing subsequent MPDUs that have + * already been received. + * This parameter specifies the timeout in milliseconds for each + * class. + */ + __le32 rx_timeout_pri_vi; + __le32 rx_timeout_pri_vo; + __le32 rx_timeout_pri_be; + __le32 rx_timeout_pri_bk; + + /* + * what mode the rx should decap packets to + * + * MAC can decap to RAW (no decap), native wifi or Ethernet types + * THis setting also determines the default TX behavior, however TX + * behavior can be modified on a per VAP basis during VAP init + */ + __le32 rx_decap_mode; + + /* what is the maximum scan requests than can be queued */ + __le32 scan_max_pending_reqs; + + /* maximum VDEV that could use BMISS offload */ + __le32 bmiss_offload_max_vdev; + + /* maximum VDEV that could use offload roaming */ + __le32 roam_offload_max_vdev; + + /* maximum AP profiles that would push to offload roaming */ + __le32 roam_offload_max_ap_profiles; + + /* + * how many groups to use for mcast->ucast conversion + * + * The target's WAL maintains a table to hold information regarding + * which peers belong to a given multicast group, so that if + * multicast->unicast conversion is enabled, the target can convert + * multicast tx frames to a series of unicast tx frames, to each + * peer within the multicast group. + This num_mcast_groups configuration parameter tells the target how + * many multicast groups to provide storage for within its multicast + * group membership table. + */ + __le32 num_mcast_groups; + + /* + * size to alloc for the mcast membership table + * + * This num_mcast_table_elems configuration parameter tells the + * target how many peer elements it needs to provide storage for in + * its multicast group membership table. + * These multicast group membership table elements are shared by the + * multicast groups stored within the table. + */ + __le32 num_mcast_table_elems; + + /* + * whether/how to do multicast->unicast conversion + * + * This configuration parameter specifies whether the target should + * perform multicast --> unicast conversion on transmit, and if so, + * what to do if it finds no entries in its multicast group + * membership table for the multicast IP address in the tx frame. + * Configuration value: + * 0 -> Do not perform multicast to unicast conversion. + * 1 -> Convert multicast frames to unicast, if the IP multicast + * address from the tx frame is found in the multicast group + * membership table. If the IP multicast address is not found, + * drop the frame. + * 2 -> Convert multicast frames to unicast, if the IP multicast + * address from the tx frame is found in the multicast group + * membership table. If the IP multicast address is not found, + * transmit the frame as multicast. + */ + __le32 mcast2ucast_mode; + + /* + * how much memory to allocate for a tx PPDU dbg log + * + * This parameter controls how much memory the target will allocate + * to store a log of tx PPDU meta-information (how large the PPDU + * was, when it was sent, whether it was successful, etc.) + */ + __le32 tx_dbg_log_size; + + /* how many AST entries to be allocated for WDS */ + __le32 num_wds_entries; + + /* + * MAC DMA burst size, e.g., For target PCI limit can be + * 0 -default, 1 256B + */ + __le32 dma_burst_size; + + /* + * Fixed delimiters to be inserted after every MPDU to + * account for interface latency to avoid underrun. + */ + __le32 mac_aggr_delim; + + /* + * determine whether target is responsible for detecting duplicate + * non-aggregate MPDU and timing out stale fragments. + * + * A-MPDU reordering is always performed on the target. + * + * 0: target responsible for frag timeout and dup checking + * 1: host responsible for frag timeout and dup checking + */ + __le32 rx_skip_defrag_timeout_dup_detection_check; + + /* + * Configuration for VoW : + * No of Video Nodes to be supported + * and Max no of descriptors for each Video link (node). + */ + __le32 vow_config; + + /* maximum VDEV that could use GTK offload */ + __le32 gtk_offload_max_vdev; + + /* Number of msdu descriptors target should use */ + __le32 num_msdu_desc; + + /* + * Max. number of Tx fragments per MSDU + * This parameter controls the max number of Tx fragments per MSDU. + * This is sent by the target as part of the WMI_SERVICE_READY event + * and is overriden by the OS shim as required. + */ + __le32 max_frag_entries; +} __packed; + +/* strucutre describing host memory chunk. */ +struct host_memory_chunk { + /* id of the request that is passed up in service ready */ + __le32 req_id; + /* the physical address the memory chunk */ + __le32 ptr; + /* size of the chunk */ + __le32 size; +} __packed; + +struct wmi_init_cmd { + struct wmi_resource_config resource_config; + __le32 num_host_mem_chunks; + + /* + * variable number of host memory chunks. + * This should be the last element in the structure + */ + struct host_memory_chunk host_mem_chunks[1]; +} __packed; + +/* TLV for channel list */ +struct wmi_chan_list { + __le32 tag; /* WMI_CHAN_LIST_TAG */ + __le32 num_chan; + __le32 channel_list[0]; +} __packed; + +struct wmi_bssid_list { + __le32 tag; /* WMI_BSSID_LIST_TAG */ + __le32 num_bssid; + struct wmi_mac_addr bssid_list[0]; +} __packed; + +struct wmi_ie_data { + __le32 tag; /* WMI_IE_TAG */ + __le32 ie_len; + u8 ie_data[0]; +} __packed; + +struct wmi_ssid { + __le32 ssid_len; + u8 ssid[32]; +} __packed; + +struct wmi_ssid_list { + __le32 tag; /* WMI_SSID_LIST_TAG */ + __le32 num_ssids; + struct wmi_ssid ssids[0]; +} __packed; + +/* prefix used by scan requestor ids on the host */ +#define WMI_HOST_SCAN_REQUESTOR_ID_PREFIX 0xA000 + +/* prefix used by scan request ids generated on the host */ +/* host cycles through the lower 12 bits to generate ids */ +#define WMI_HOST_SCAN_REQ_ID_PREFIX 0xA000 + +#define WLAN_SCAN_PARAMS_MAX_SSID 16 +#define WLAN_SCAN_PARAMS_MAX_BSSID 4 +#define WLAN_SCAN_PARAMS_MAX_IE_LEN 256 + +/* Scan priority numbers must be sequential, starting with 0 */ +enum wmi_scan_priority { + WMI_SCAN_PRIORITY_VERY_LOW = 0, + WMI_SCAN_PRIORITY_LOW, + WMI_SCAN_PRIORITY_MEDIUM, + WMI_SCAN_PRIORITY_HIGH, + WMI_SCAN_PRIORITY_VERY_HIGH, + WMI_SCAN_PRIORITY_COUNT /* number of priorities supported */ +}; + +struct wmi_start_scan_cmd { + /* Scan ID */ + __le32 scan_id; + /* Scan requestor ID */ + __le32 scan_req_id; + /* VDEV id(interface) that is requesting scan */ + __le32 vdev_id; + /* Scan Priority, input to scan scheduler */ + __le32 scan_priority; + /* Scan events subscription */ + __le32 notify_scan_events; + /* dwell time in msec on active channels */ + __le32 dwell_time_active; + /* dwell time in msec on passive channels */ + __le32 dwell_time_passive; + /* + * min time in msec on the BSS channel,only valid if atleast one + * VDEV is active + */ + __le32 min_rest_time; + /* + * max rest time in msec on the BSS channel,only valid if at least + * one VDEV is active + */ + /* + * the scanner will rest on the bss channel at least min_rest_time + * after min_rest_time the scanner will start checking for tx/rx + * activity on all VDEVs. if there is no activity the scanner will + * switch to off channel. if there is activity the scanner will let + * the radio on the bss channel until max_rest_time expires.at + * max_rest_time scanner will switch to off channel irrespective of + * activity. activity is determined by the idle_time parameter. + */ + __le32 max_rest_time; + /* + * time before sending next set of probe requests. + * The scanner keeps repeating probe requests transmission with + * period specified by repeat_probe_time. + * The number of probe requests specified depends on the ssid_list + * and bssid_list + */ + __le32 repeat_probe_time; + /* time in msec between 2 consequetive probe requests with in a set. */ + __le32 probe_spacing_time; + /* + * data inactivity time in msec on bss channel that will be used by + * scanner for measuring the inactivity. + */ + __le32 idle_time; + /* maximum time in msec allowed for scan */ + __le32 max_scan_time; + /* + * delay in msec before sending first probe request after switching + * to a channel + */ + __le32 probe_delay; + /* Scan control flags */ + __le32 scan_ctrl_flags; + + /* Burst duration time in msecs */ + __le32 burst_duration; + /* + * TLV (tag length value ) paramerters follow the scan_cmd structure. + * TLV can contain channel list, bssid list, ssid list and + * ie. the TLV tags are defined above; + */ +} __packed; + +struct wmi_ssid_arg { + int len; + const u8 *ssid; +}; + +struct wmi_bssid_arg { + const u8 *bssid; +}; + +struct wmi_start_scan_arg { + u32 scan_id; + u32 scan_req_id; + u32 vdev_id; + u32 scan_priority; + u32 notify_scan_events; + u32 dwell_time_active; + u32 dwell_time_passive; + u32 min_rest_time; + u32 max_rest_time; + u32 repeat_probe_time; + u32 probe_spacing_time; + u32 idle_time; + u32 max_scan_time; + u32 probe_delay; + u32 scan_ctrl_flags; + + u32 ie_len; + u32 n_channels; + u32 n_ssids; + u32 n_bssids; + + u8 ie[WLAN_SCAN_PARAMS_MAX_IE_LEN]; + u32 channels[64]; + struct wmi_ssid_arg ssids[WLAN_SCAN_PARAMS_MAX_SSID]; + struct wmi_bssid_arg bssids[WLAN_SCAN_PARAMS_MAX_BSSID]; +}; + +/* scan control flags */ + +/* passively scan all channels including active channels */ +#define WMI_SCAN_FLAG_PASSIVE 0x1 +/* add wild card ssid probe request even though ssid_list is specified. */ +#define WMI_SCAN_ADD_BCAST_PROBE_REQ 0x2 +/* add cck rates to rates/xrate ie for the generated probe request */ +#define WMI_SCAN_ADD_CCK_RATES 0x4 +/* add ofdm rates to rates/xrate ie for the generated probe request */ +#define WMI_SCAN_ADD_OFDM_RATES 0x8 +/* To enable indication of Chan load and Noise floor to host */ +#define WMI_SCAN_CHAN_STAT_EVENT 0x10 +/* Filter Probe request frames */ +#define WMI_SCAN_FILTER_PROBE_REQ 0x20 +/* When set, DFS channels will not be scanned */ +#define WMI_SCAN_BYPASS_DFS_CHN 0x40 +/* Different FW scan engine may choose to bail out on errors. + * Allow the driver to have influence over that. */ +#define WMI_SCAN_CONTINUE_ON_ERROR 0x80 + +/* WMI_SCAN_CLASS_MASK must be the same value as IEEE80211_SCAN_CLASS_MASK */ +#define WMI_SCAN_CLASS_MASK 0xFF000000 + + +enum wmi_stop_scan_type { + WMI_SCAN_STOP_ONE = 0x00000000, /* stop by scan_id */ + WMI_SCAN_STOP_VDEV_ALL = 0x01000000, /* stop by vdev_id */ + WMI_SCAN_STOP_ALL = 0x04000000, /* stop all scans */ +}; + +struct wmi_stop_scan_cmd { + __le32 scan_req_id; + __le32 scan_id; + __le32 req_type; + __le32 vdev_id; +} __packed; + +struct wmi_stop_scan_arg { + u32 req_id; + enum wmi_stop_scan_type req_type; + union { + u32 scan_id; + u32 vdev_id; + } u; +}; + +struct wmi_scan_chan_list_cmd { + __le32 num_scan_chans; + struct wmi_channel chan_info[0]; +} __packed; + +struct wmi_scan_chan_list_arg { + u32 n_channels; + struct wmi_channel_arg *channels; +}; + +enum wmi_bss_filter { + WMI_BSS_FILTER_NONE = 0, /* no beacons forwarded */ + WMI_BSS_FILTER_ALL, /* all beacons forwarded */ + WMI_BSS_FILTER_PROFILE, /* only beacons matching profile */ + WMI_BSS_FILTER_ALL_BUT_PROFILE, /* all but beacons matching profile */ + WMI_BSS_FILTER_CURRENT_BSS, /* only beacons matching current BSS */ + WMI_BSS_FILTER_ALL_BUT_BSS, /* all but beacons matching BSS */ + WMI_BSS_FILTER_PROBED_SSID, /* beacons matching probed ssid */ + WMI_BSS_FILTER_LAST_BSS, /* marker only */ +}; + +enum wmi_scan_event_type { + WMI_SCAN_EVENT_STARTED = 0x1, + WMI_SCAN_EVENT_COMPLETED = 0x2, + WMI_SCAN_EVENT_BSS_CHANNEL = 0x4, + WMI_SCAN_EVENT_FOREIGN_CHANNEL = 0x8, + WMI_SCAN_EVENT_DEQUEUED = 0x10, + WMI_SCAN_EVENT_PREEMPTED = 0x20, /* possibly by high-prio scan */ + WMI_SCAN_EVENT_START_FAILED = 0x40, + WMI_SCAN_EVENT_RESTARTED = 0x80, + WMI_SCAN_EVENT_MAX = 0x8000 +}; + +enum wmi_scan_completion_reason { + WMI_SCAN_REASON_COMPLETED, + WMI_SCAN_REASON_CANCELLED, + WMI_SCAN_REASON_PREEMPTED, + WMI_SCAN_REASON_TIMEDOUT, + WMI_SCAN_REASON_MAX, +}; + +struct wmi_scan_event { + __le32 event_type; /* %WMI_SCAN_EVENT_ */ + __le32 reason; /* %WMI_SCAN_REASON_ */ + __le32 channel_freq; /* only valid for WMI_SCAN_EVENT_FOREIGN_CHANNEL */ + __le32 scan_req_id; + __le32 scan_id; + __le32 vdev_id; +} __packed; + +/* + * This defines how much headroom is kept in the + * receive frame between the descriptor and the + * payload, in order for the WMI PHY error and + * management handler to insert header contents. + * + * This is in bytes. + */ +#define WMI_MGMT_RX_HDR_HEADROOM 52 + +/* + * This event will be used for sending scan results + * as well as rx mgmt frames to the host. The rx buffer + * will be sent as part of this WMI event. It would be a + * good idea to pass all the fields in the RX status + * descriptor up to the host. + */ +struct wmi_mgmt_rx_hdr { + __le32 channel; + __le32 snr; + __le32 rate; + __le32 phy_mode; + __le32 buf_len; + __le32 status; /* %WMI_RX_STATUS_ */ +} __packed; + +struct wmi_mgmt_rx_event { + struct wmi_mgmt_rx_hdr hdr; + u8 buf[0]; +} __packed; + +#define WMI_RX_STATUS_OK 0x00 +#define WMI_RX_STATUS_ERR_CRC 0x01 +#define WMI_RX_STATUS_ERR_DECRYPT 0x08 +#define WMI_RX_STATUS_ERR_MIC 0x10 +#define WMI_RX_STATUS_ERR_KEY_CACHE_MISS 0x20 + +struct wmi_single_phyerr_rx_hdr { + /* TSF timestamp */ + __le32 tsf_timestamp; + + /* + * Current freq1, freq2 + * + * [7:0]: freq1[lo] + * [15:8] : freq1[hi] + * [23:16]: freq2[lo] + * [31:24]: freq2[hi] + */ + __le16 freq1; + __le16 freq2; + + /* + * Combined RSSI over all chains and channel width for this PHY error + * + * [7:0]: RSSI combined + * [15:8]: Channel width (MHz) + * [23:16]: PHY error code + * [24:16]: reserved (future use) + */ + u8 rssi_combined; + u8 chan_width_mhz; + u8 phy_err_code; + u8 rsvd0; + + /* + * RSSI on chain 0 through 3 + * + * This is formatted the same as the PPDU_START RX descriptor + * field: + * + * [7:0]: pri20 + * [15:8]: sec20 + * [23:16]: sec40 + * [31:24]: sec80 + */ + + __le32 rssi_chain0; + __le32 rssi_chain1; + __le32 rssi_chain2; + __le32 rssi_chain3; + + /* + * Last calibrated NF value for chain 0 through 3 + * + * nf_list_1: + * + * + [15:0] - chain 0 + * + [31:16] - chain 1 + * + * nf_list_2: + * + * + [15:0] - chain 2 + * + [31:16] - chain 3 + */ + __le32 nf_list_1; + __le32 nf_list_2; + + + /* Length of the frame */ + __le32 buf_len; +} __packed; + +struct wmi_single_phyerr_rx_event { + /* Phy error event header */ + struct wmi_single_phyerr_rx_hdr hdr; + /* frame buffer */ + u8 bufp[0]; +} __packed; + +struct wmi_comb_phyerr_rx_hdr { + /* Phy error phy error count */ + __le32 num_phyerr_events; + __le32 tsf_l32; + __le32 tsf_u32; +} __packed; + +struct wmi_comb_phyerr_rx_event { + /* Phy error phy error count */ + struct wmi_comb_phyerr_rx_hdr hdr; + /* + * frame buffer - contains multiple payloads in the order: + * header - payload, header - payload... + * (The header is of type: wmi_single_phyerr_rx_hdr) + */ + u8 bufp[0]; +} __packed; + +struct wmi_mgmt_tx_hdr { + __le32 vdev_id; + struct wmi_mac_addr peer_macaddr; + __le32 tx_rate; + __le32 tx_power; + __le32 buf_len; +} __packed; + +struct wmi_mgmt_tx_cmd { + struct wmi_mgmt_tx_hdr hdr; + u8 buf[0]; +} __packed; + +struct wmi_echo_event { + __le32 value; +} __packed; + +struct wmi_echo_cmd { + __le32 value; +} __packed; + + +struct wmi_pdev_set_regdomain_cmd { + __le32 reg_domain; + __le32 reg_domain_2G; + __le32 reg_domain_5G; + __le32 conformance_test_limit_2G; + __le32 conformance_test_limit_5G; +} __packed; + +/* Command to set/unset chip in quiet mode */ +struct wmi_pdev_set_quiet_cmd { + /* period in TUs */ + __le32 period; + + /* duration in TUs */ + __le32 duration; + + /* offset in TUs */ + __le32 next_start; + + /* enable/disable */ + __le32 enabled; +} __packed; + + +/* + * 802.11g protection mode. + */ +enum ath10k_protmode { + ATH10K_PROT_NONE = 0, /* no protection */ + ATH10K_PROT_CTSONLY = 1, /* CTS to self */ + ATH10K_PROT_RTSCTS = 2, /* RTS-CTS */ +}; + +enum wmi_beacon_gen_mode { + WMI_BEACON_STAGGERED_MODE = 0, + WMI_BEACON_BURST_MODE = 1 +}; + +enum wmi_csa_event_ies_present_flag { + WMI_CSA_IE_PRESENT = 0x00000001, + WMI_XCSA_IE_PRESENT = 0x00000002, + WMI_WBW_IE_PRESENT = 0x00000004, + WMI_CSWARP_IE_PRESENT = 0x00000008, +}; + +/* wmi CSA receive event from beacon frame */ +struct wmi_csa_event { + __le32 i_fc_dur; + /* Bit 0-15: FC */ + /* Bit 16-31: DUR */ + struct wmi_mac_addr i_addr1; + struct wmi_mac_addr i_addr2; + __le32 csa_ie[2]; + __le32 xcsa_ie[2]; + __le32 wb_ie[2]; + __le32 cswarp_ie; + __le32 ies_present_flag; /* wmi_csa_event_ies_present_flag */ +} __packed; + +/* the definition of different PDEV parameters */ +#define PDEV_DEFAULT_STATS_UPDATE_PERIOD 500 +#define VDEV_DEFAULT_STATS_UPDATE_PERIOD 500 +#define PEER_DEFAULT_STATS_UPDATE_PERIOD 500 + +enum wmi_pdev_param { + /* TX chian mask */ + WMI_PDEV_PARAM_TX_CHAIN_MASK = 0x1, + /* RX chian mask */ + WMI_PDEV_PARAM_RX_CHAIN_MASK, + /* TX power limit for 2G Radio */ + WMI_PDEV_PARAM_TXPOWER_LIMIT2G, + /* TX power limit for 5G Radio */ + WMI_PDEV_PARAM_TXPOWER_LIMIT5G, + /* TX power scale */ + WMI_PDEV_PARAM_TXPOWER_SCALE, + /* Beacon generation mode . 0: host, 1: target */ + WMI_PDEV_PARAM_BEACON_GEN_MODE, + /* Beacon generation mode . 0: staggered 1: bursted */ + WMI_PDEV_PARAM_BEACON_TX_MODE, + /* + * Resource manager off chan mode . + * 0: turn off off chan mode. 1: turn on offchan mode + */ + WMI_PDEV_PARAM_RESMGR_OFFCHAN_MODE, + /* + * Protection mode: + * 0: no protection 1:use CTS-to-self 2: use RTS/CTS + */ + WMI_PDEV_PARAM_PROTECTION_MODE, + /* Dynamic bandwidth 0: disable 1: enable */ + WMI_PDEV_PARAM_DYNAMIC_BW, + /* Non aggregrate/ 11g sw retry threshold.0-disable */ + WMI_PDEV_PARAM_NON_AGG_SW_RETRY_TH, + /* aggregrate sw retry threshold. 0-disable*/ + WMI_PDEV_PARAM_AGG_SW_RETRY_TH, + /* Station kickout threshold (non of consecutive failures).0-disable */ + WMI_PDEV_PARAM_STA_KICKOUT_TH, + /* Aggerate size scaling configuration per AC */ + WMI_PDEV_PARAM_AC_AGGRSIZE_SCALING, + /* LTR enable */ + WMI_PDEV_PARAM_LTR_ENABLE, + /* LTR latency for BE, in us */ + WMI_PDEV_PARAM_LTR_AC_LATENCY_BE, + /* LTR latency for BK, in us */ + WMI_PDEV_PARAM_LTR_AC_LATENCY_BK, + /* LTR latency for VI, in us */ + WMI_PDEV_PARAM_LTR_AC_LATENCY_VI, + /* LTR latency for VO, in us */ + WMI_PDEV_PARAM_LTR_AC_LATENCY_VO, + /* LTR AC latency timeout, in ms */ + WMI_PDEV_PARAM_LTR_AC_LATENCY_TIMEOUT, + /* LTR platform latency override, in us */ + WMI_PDEV_PARAM_LTR_SLEEP_OVERRIDE, + /* LTR-RX override, in us */ + WMI_PDEV_PARAM_LTR_RX_OVERRIDE, + /* Tx activity timeout for LTR, in us */ + WMI_PDEV_PARAM_LTR_TX_ACTIVITY_TIMEOUT, + /* L1SS state machine enable */ + WMI_PDEV_PARAM_L1SS_ENABLE, + /* Deep sleep state machine enable */ + WMI_PDEV_PARAM_DSLEEP_ENABLE, + /* RX buffering flush enable */ + WMI_PDEV_PARAM_PCIELP_TXBUF_FLUSH, + /* RX buffering matermark */ + WMI_PDEV_PARAM_PCIELP_TXBUF_WATERMARK, + /* RX buffering timeout enable */ + WMI_PDEV_PARAM_PCIELP_TXBUF_TMO_EN, + /* RX buffering timeout value */ + WMI_PDEV_PARAM_PCIELP_TXBUF_TMO_VALUE, + /* pdev level stats update period in ms */ + WMI_PDEV_PARAM_PDEV_STATS_UPDATE_PERIOD, + /* vdev level stats update period in ms */ + WMI_PDEV_PARAM_VDEV_STATS_UPDATE_PERIOD, + /* peer level stats update period in ms */ + WMI_PDEV_PARAM_PEER_STATS_UPDATE_PERIOD, + /* beacon filter status update period */ + WMI_PDEV_PARAM_BCNFLT_STATS_UPDATE_PERIOD, + /* QOS Mgmt frame protection MFP/PMF 0: disable, 1: enable */ + WMI_PDEV_PARAM_PMF_QOS, + /* Access category on which ARP frames are sent */ + WMI_PDEV_PARAM_ARP_AC_OVERRIDE, + /* DCS configuration */ + WMI_PDEV_PARAM_DCS, + /* Enable/Disable ANI on target */ + WMI_PDEV_PARAM_ANI_ENABLE, + /* configure the ANI polling period */ + WMI_PDEV_PARAM_ANI_POLL_PERIOD, + /* configure the ANI listening period */ + WMI_PDEV_PARAM_ANI_LISTEN_PERIOD, + /* configure OFDM immunity level */ + WMI_PDEV_PARAM_ANI_OFDM_LEVEL, + /* configure CCK immunity level */ + WMI_PDEV_PARAM_ANI_CCK_LEVEL, + /* Enable/Disable CDD for 1x1 STAs in rate control module */ + WMI_PDEV_PARAM_DYNTXCHAIN, + /* Enable/Disable proxy STA */ + WMI_PDEV_PARAM_PROXY_STA, + /* Enable/Disable low power state when all VDEVs are inactive/idle. */ + WMI_PDEV_PARAM_IDLE_PS_CONFIG, + /* Enable/Disable power gating sleep */ + WMI_PDEV_PARAM_POWER_GATING_SLEEP, +}; + +struct wmi_pdev_set_param_cmd { + __le32 param_id; + __le32 param_value; +} __packed; + +struct wmi_pdev_get_tpc_config_cmd { + /* parameter */ + __le32 param; +} __packed; + +#define WMI_TPC_RATE_MAX 160 +#define WMI_TPC_TX_N_CHAIN 4 + +enum wmi_tpc_config_event_flag { + WMI_TPC_CONFIG_EVENT_FLAG_TABLE_CDD = 0x1, + WMI_TPC_CONFIG_EVENT_FLAG_TABLE_STBC = 0x2, + WMI_TPC_CONFIG_EVENT_FLAG_TABLE_TXBF = 0x4, +}; + +struct wmi_pdev_tpc_config_event { + __le32 reg_domain; + __le32 chan_freq; + __le32 phy_mode; + __le32 twice_antenna_reduction; + __le32 twice_max_rd_power; + s32 twice_antenna_gain; + __le32 power_limit; + __le32 rate_max; + __le32 num_tx_chain; + __le32 ctl; + __le32 flags; + s8 max_reg_allow_pow[WMI_TPC_TX_N_CHAIN]; + s8 max_reg_allow_pow_agcdd[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN]; + s8 max_reg_allow_pow_agstbc[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN]; + s8 max_reg_allow_pow_agtxbf[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN]; + u8 rates_array[WMI_TPC_RATE_MAX]; +} __packed; + +/* Transmit power scale factor. */ +enum wmi_tp_scale { + WMI_TP_SCALE_MAX = 0, /* no scaling (default) */ + WMI_TP_SCALE_50 = 1, /* 50% of max (-3 dBm) */ + WMI_TP_SCALE_25 = 2, /* 25% of max (-6 dBm) */ + WMI_TP_SCALE_12 = 3, /* 12% of max (-9 dBm) */ + WMI_TP_SCALE_MIN = 4, /* min, but still on */ + WMI_TP_SCALE_SIZE = 5, /* max num of enum */ +}; + +struct wmi_set_channel_cmd { + /* channel (only frequency and mode info are used) */ + struct wmi_channel chan; +} __packed; + +struct wmi_pdev_chanlist_update_event { + /* number of channels */ + __le32 num_chan; + /* array of channels */ + struct wmi_channel channel_list[1]; +} __packed; + +#define WMI_MAX_DEBUG_MESG (sizeof(u32) * 32) + +struct wmi_debug_mesg_event { + /* message buffer, NULL terminated */ + char bufp[WMI_MAX_DEBUG_MESG]; +} __packed; + +enum { + /* P2P device */ + VDEV_SUBTYPE_P2PDEV = 0, + /* P2P client */ + VDEV_SUBTYPE_P2PCLI, + /* P2P GO */ + VDEV_SUBTYPE_P2PGO, + /* BT3.0 HS */ + VDEV_SUBTYPE_BT, +}; + +struct wmi_pdev_set_channel_cmd { + /* idnore power , only use flags , mode and freq */ + struct wmi_channel chan; +} __packed; + +/* Customize the DSCP (bit) to TID (0-7) mapping for QOS */ +#define WMI_DSCP_MAP_MAX (64) +struct wmi_pdev_set_dscp_tid_map_cmd { + /* map indicating DSCP to TID conversion */ + __le32 dscp_to_tid_map[WMI_DSCP_MAP_MAX]; +} __packed; + +enum mcast_bcast_rate_id { + WMI_SET_MCAST_RATE, + WMI_SET_BCAST_RATE +}; + +struct mcast_bcast_rate { + enum mcast_bcast_rate_id rate_id; + __le32 rate; +} __packed; + +struct wmi_wmm_params { + __le32 cwmin; + __le32 cwmax; + __le32 aifs; + __le32 txop; + __le32 acm; + __le32 no_ack; +} __packed; + +struct wmi_pdev_set_wmm_params { + struct wmi_wmm_params ac_be; + struct wmi_wmm_params ac_bk; + struct wmi_wmm_params ac_vi; + struct wmi_wmm_params ac_vo; +} __packed; + +struct wmi_wmm_params_arg { + u32 cwmin; + u32 cwmax; + u32 aifs; + u32 txop; + u32 acm; + u32 no_ack; +}; + +struct wmi_pdev_set_wmm_params_arg { + struct wmi_wmm_params_arg ac_be; + struct wmi_wmm_params_arg ac_bk; + struct wmi_wmm_params_arg ac_vi; + struct wmi_wmm_params_arg ac_vo; +}; + +struct wal_dbg_tx_stats { + /* Num HTT cookies queued to dispatch list */ + __le32 comp_queued; + + /* Num HTT cookies dispatched */ + __le32 comp_delivered; + + /* Num MSDU queued to WAL */ + __le32 msdu_enqued; + + /* Num MPDU queue to WAL */ + __le32 mpdu_enqued; + + /* Num MSDUs dropped by WMM limit */ + __le32 wmm_drop; + + /* Num Local frames queued */ + __le32 local_enqued; + + /* Num Local frames done */ + __le32 local_freed; + + /* Num queued to HW */ + __le32 hw_queued; + + /* Num PPDU reaped from HW */ + __le32 hw_reaped; + + /* Num underruns */ + __le32 underrun; + + /* Num PPDUs cleaned up in TX abort */ + __le32 tx_abort; + + /* Num MPDUs requed by SW */ + __le32 mpdus_requed; + + /* excessive retries */ + __le32 tx_ko; + + /* data hw rate code */ + __le32 data_rc; + + /* Scheduler self triggers */ + __le32 self_triggers; + + /* frames dropped due to excessive sw retries */ + __le32 sw_retry_failure; + + /* illegal rate phy errors */ + __le32 illgl_rate_phy_err; + + /* wal pdev continous xretry */ + __le32 pdev_cont_xretry; + + /* wal pdev continous xretry */ + __le32 pdev_tx_timeout; + + /* wal pdev resets */ + __le32 pdev_resets; + + __le32 phy_underrun; + + /* MPDU is more than txop limit */ + __le32 txop_ovf; +} __packed; + +struct wal_dbg_rx_stats { + /* Cnts any change in ring routing mid-ppdu */ + __le32 mid_ppdu_route_change; + + /* Total number of statuses processed */ + __le32 status_rcvd; + + /* Extra frags on rings 0-3 */ + __le32 r0_frags; + __le32 r1_frags; + __le32 r2_frags; + __le32 r3_frags; + + /* MSDUs / MPDUs delivered to HTT */ + __le32 htt_msdus; + __le32 htt_mpdus; + + /* MSDUs / MPDUs delivered to local stack */ + __le32 loc_msdus; + __le32 loc_mpdus; + + /* AMSDUs that have more MSDUs than the status ring size */ + __le32 oversize_amsdu; + + /* Number of PHY errors */ + __le32 phy_errs; + + /* Number of PHY errors drops */ + __le32 phy_err_drop; + + /* Number of mpdu errors - FCS, MIC, ENC etc. */ + __le32 mpdu_errs; +} __packed; + +struct wal_dbg_peer_stats { + /* REMOVE THIS ONCE REAL PEER STAT COUNTERS ARE ADDED */ + __le32 dummy; +} __packed; + +struct wal_dbg_stats { + struct wal_dbg_tx_stats tx; + struct wal_dbg_rx_stats rx; + struct wal_dbg_peer_stats peer; +} __packed; + +enum wmi_stats_id { + WMI_REQUEST_PEER_STAT = 0x01, + WMI_REQUEST_AP_STAT = 0x02 +}; + +struct wmi_request_stats_cmd { + __le32 stats_id; + + /* + * Space to add parameters like + * peer mac addr + */ +} __packed; + +/* Suspend option */ +enum { + /* suspend */ + WMI_PDEV_SUSPEND, + + /* suspend and disable all interrupts */ + WMI_PDEV_SUSPEND_AND_DISABLE_INTR, +}; + +struct wmi_pdev_suspend_cmd { + /* suspend option sent to target */ + __le32 suspend_opt; +} __packed; + +struct wmi_stats_event { + __le32 stats_id; /* %WMI_REQUEST_ */ + /* + * number of pdev stats event structures + * (wmi_pdev_stats) 0 or 1 + */ + __le32 num_pdev_stats; + /* + * number of vdev stats event structures + * (wmi_vdev_stats) 0 or max vdevs + */ + __le32 num_vdev_stats; + /* + * number of peer stats event structures + * (wmi_peer_stats) 0 or max peers + */ + __le32 num_peer_stats; + __le32 num_bcnflt_stats; + /* + * followed by + * num_pdev_stats * size of(struct wmi_pdev_stats) + * num_vdev_stats * size of(struct wmi_vdev_stats) + * num_peer_stats * size of(struct wmi_peer_stats) + * + * By having a zero sized array, the pointer to data area + * becomes available without increasing the struct size + */ + u8 data[0]; +} __packed; + +/* + * PDEV statistics + * TODO: add all PDEV stats here + */ +struct wmi_pdev_stats { + __le32 chan_nf; /* Channel noise floor */ + __le32 tx_frame_count; /* TX frame count */ + __le32 rx_frame_count; /* RX frame count */ + __le32 rx_clear_count; /* rx clear count */ + __le32 cycle_count; /* cycle count */ + __le32 phy_err_count; /* Phy error count */ + __le32 chan_tx_pwr; /* channel tx power */ + struct wal_dbg_stats wal; /* WAL dbg stats */ +} __packed; + +/* + * VDEV statistics + * TODO: add all VDEV stats here + */ +struct wmi_vdev_stats { + __le32 vdev_id; +} __packed; + +/* + * peer statistics. + * TODO: add more stats + */ +struct wmi_peer_stats { + struct wmi_mac_addr peer_macaddr; + __le32 peer_rssi; + __le32 peer_tx_rate; +} __packed; + +struct wmi_vdev_create_cmd { + __le32 vdev_id; + __le32 vdev_type; + __le32 vdev_subtype; + struct wmi_mac_addr vdev_macaddr; +} __packed; + +enum wmi_vdev_type { + WMI_VDEV_TYPE_AP = 1, + WMI_VDEV_TYPE_STA = 2, + WMI_VDEV_TYPE_IBSS = 3, + WMI_VDEV_TYPE_MONITOR = 4, +}; + +enum wmi_vdev_subtype { + WMI_VDEV_SUBTYPE_NONE = 0, + WMI_VDEV_SUBTYPE_P2P_DEVICE = 1, + WMI_VDEV_SUBTYPE_P2P_CLIENT = 2, + WMI_VDEV_SUBTYPE_P2P_GO = 3, +}; + +/* values for vdev_subtype */ + +/* values for vdev_start_request flags */ +/* + * Indicates that AP VDEV uses hidden ssid. only valid for + * AP/GO */ +#define WMI_VDEV_START_HIDDEN_SSID (1<<0) +/* + * Indicates if robust management frame/management frame + * protection is enabled. For GO/AP vdevs, it indicates that + * it may support station/client associations with RMF enabled. + * For STA/client vdevs, it indicates that sta will + * associate with AP with RMF enabled. */ +#define WMI_VDEV_START_PMF_ENABLED (1<<1) + +struct wmi_p2p_noa_descriptor { + __le32 type_count; /* 255: continuous schedule, 0: reserved */ + __le32 duration; /* Absent period duration in micro seconds */ + __le32 interval; /* Absent period interval in micro seconds */ + __le32 start_time; /* 32 bit tsf time when in starts */ +} __packed; + +struct wmi_vdev_start_request_cmd { + /* WMI channel */ + struct wmi_channel chan; + /* unique id identifying the VDEV, generated by the caller */ + __le32 vdev_id; + /* requestor id identifying the caller module */ + __le32 requestor_id; + /* beacon interval from received beacon */ + __le32 beacon_interval; + /* DTIM Period from the received beacon */ + __le32 dtim_period; + /* Flags */ + __le32 flags; + /* ssid field. Only valid for AP/GO/IBSS/BTAmp VDEV type. */ + struct wmi_ssid ssid; + /* beacon/probe reponse xmit rate. Applicable for SoftAP. */ + __le32 bcn_tx_rate; + /* beacon/probe reponse xmit power. Applicable for SoftAP. */ + __le32 bcn_tx_power; + /* number of p2p NOA descriptor(s) from scan entry */ + __le32 num_noa_descriptors; + /* + * Disable H/W ack. This used by WMI_VDEV_RESTART_REQUEST_CMDID. + * During CAC, Our HW shouldn't ack ditected frames + */ + __le32 disable_hw_ack; + /* actual p2p NOA descriptor from scan entry */ + struct wmi_p2p_noa_descriptor noa_descriptors[2]; +} __packed; + +struct wmi_vdev_restart_request_cmd { + struct wmi_vdev_start_request_cmd vdev_start_request_cmd; +} __packed; + +struct wmi_vdev_start_request_arg { + u32 vdev_id; + struct wmi_channel_arg channel; + u32 bcn_intval; + u32 dtim_period; + u8 *ssid; + u32 ssid_len; + u32 bcn_tx_rate; + u32 bcn_tx_power; + bool disable_hw_ack; + bool hidden_ssid; + bool pmf_enabled; +}; + +struct wmi_vdev_delete_cmd { + /* unique id identifying the VDEV, generated by the caller */ + __le32 vdev_id; +} __packed; + +struct wmi_vdev_up_cmd { + __le32 vdev_id; + __le32 vdev_assoc_id; + struct wmi_mac_addr vdev_bssid; +} __packed; + +struct wmi_vdev_stop_cmd { + __le32 vdev_id; +} __packed; + +struct wmi_vdev_down_cmd { + __le32 vdev_id; +} __packed; + +struct wmi_vdev_standby_response_cmd { + /* unique id identifying the VDEV, generated by the caller */ + __le32 vdev_id; +} __packed; + +struct wmi_vdev_resume_response_cmd { + /* unique id identifying the VDEV, generated by the caller */ + __le32 vdev_id; +} __packed; + +struct wmi_vdev_set_param_cmd { + __le32 vdev_id; + __le32 param_id; + __le32 param_value; +} __packed; + +#define WMI_MAX_KEY_INDEX 3 +#define WMI_MAX_KEY_LEN 32 + +#define WMI_KEY_PAIRWISE 0x00 +#define WMI_KEY_GROUP 0x01 +#define WMI_KEY_TX_USAGE 0x02 /* default tx key - static wep */ + +struct wmi_key_seq_counter { + __le32 key_seq_counter_l; + __le32 key_seq_counter_h; +} __packed; + +#define WMI_CIPHER_NONE 0x0 /* clear key */ +#define WMI_CIPHER_WEP 0x1 +#define WMI_CIPHER_TKIP 0x2 +#define WMI_CIPHER_AES_OCB 0x3 +#define WMI_CIPHER_AES_CCM 0x4 +#define WMI_CIPHER_WAPI 0x5 +#define WMI_CIPHER_CKIP 0x6 +#define WMI_CIPHER_AES_CMAC 0x7 + +struct wmi_vdev_install_key_cmd { + __le32 vdev_id; + struct wmi_mac_addr peer_macaddr; + __le32 key_idx; + __le32 key_flags; + __le32 key_cipher; /* %WMI_CIPHER_ */ + struct wmi_key_seq_counter key_rsc_counter; + struct wmi_key_seq_counter key_global_rsc_counter; + struct wmi_key_seq_counter key_tsc_counter; + u8 wpi_key_rsc_counter[16]; + u8 wpi_key_tsc_counter[16]; + __le32 key_len; + __le32 key_txmic_len; + __le32 key_rxmic_len; + + /* contains key followed by tx mic followed by rx mic */ + u8 key_data[0]; +} __packed; + +struct wmi_vdev_install_key_arg { + u32 vdev_id; + const u8 *macaddr; + u32 key_idx; + u32 key_flags; + u32 key_cipher; + u32 key_len; + u32 key_txmic_len; + u32 key_rxmic_len; + const void *key_data; +}; + +/* Preamble types to be used with VDEV fixed rate configuration */ +enum wmi_rate_preamble { + WMI_RATE_PREAMBLE_OFDM, + WMI_RATE_PREAMBLE_CCK, + WMI_RATE_PREAMBLE_HT, + WMI_RATE_PREAMBLE_VHT, +}; + +/* Value to disable fixed rate setting */ +#define WMI_FIXED_RATE_NONE (0xff) + +/* the definition of different VDEV parameters */ +enum wmi_vdev_param { + /* RTS Threshold */ + WMI_VDEV_PARAM_RTS_THRESHOLD = 0x1, + /* Fragmentation threshold */ + WMI_VDEV_PARAM_FRAGMENTATION_THRESHOLD, + /* beacon interval in TUs */ + WMI_VDEV_PARAM_BEACON_INTERVAL, + /* Listen interval in TUs */ + WMI_VDEV_PARAM_LISTEN_INTERVAL, + /* muticast rate in Mbps */ + WMI_VDEV_PARAM_MULTICAST_RATE, + /* management frame rate in Mbps */ + WMI_VDEV_PARAM_MGMT_TX_RATE, + /* slot time (long vs short) */ + WMI_VDEV_PARAM_SLOT_TIME, + /* preamble (long vs short) */ + WMI_VDEV_PARAM_PREAMBLE, + /* SWBA time (time before tbtt in msec) */ + WMI_VDEV_PARAM_SWBA_TIME, + /* time period for updating VDEV stats */ + WMI_VDEV_STATS_UPDATE_PERIOD, + /* age out time in msec for frames queued for station in power save */ + WMI_VDEV_PWRSAVE_AGEOUT_TIME, + /* + * Host SWBA interval (time in msec before tbtt for SWBA event + * generation). + */ + WMI_VDEV_HOST_SWBA_INTERVAL, + /* DTIM period (specified in units of num beacon intervals) */ + WMI_VDEV_PARAM_DTIM_PERIOD, + /* + * scheduler air time limit for this VDEV. used by off chan + * scheduler. + */ + WMI_VDEV_OC_SCHEDULER_AIR_TIME_LIMIT, + /* enable/dsiable WDS for this VDEV */ + WMI_VDEV_PARAM_WDS, + /* ATIM Window */ + WMI_VDEV_PARAM_ATIM_WINDOW, + /* BMISS max */ + WMI_VDEV_PARAM_BMISS_COUNT_MAX, + /* BMISS first time */ + WMI_VDEV_PARAM_BMISS_FIRST_BCNT, + /* BMISS final time */ + WMI_VDEV_PARAM_BMISS_FINAL_BCNT, + /* WMM enables/disabled */ + WMI_VDEV_PARAM_FEATURE_WMM, + /* Channel width */ + WMI_VDEV_PARAM_CHWIDTH, + /* Channel Offset */ + WMI_VDEV_PARAM_CHEXTOFFSET, + /* Disable HT Protection */ + WMI_VDEV_PARAM_DISABLE_HTPROTECTION, + /* Quick STA Kickout */ + WMI_VDEV_PARAM_STA_QUICKKICKOUT, + /* Rate to be used with Management frames */ + WMI_VDEV_PARAM_MGMT_RATE, + /* Protection Mode */ + WMI_VDEV_PARAM_PROTECTION_MODE, + /* Fixed rate setting */ + WMI_VDEV_PARAM_FIXED_RATE, + /* Short GI Enable/Disable */ + WMI_VDEV_PARAM_SGI, + /* Enable LDPC */ + WMI_VDEV_PARAM_LDPC, + /* Enable Tx STBC */ + WMI_VDEV_PARAM_TX_STBC, + /* Enable Rx STBC */ + WMI_VDEV_PARAM_RX_STBC, + /* Intra BSS forwarding */ + WMI_VDEV_PARAM_INTRA_BSS_FWD, + /* Setting Default xmit key for Vdev */ + WMI_VDEV_PARAM_DEF_KEYID, + /* NSS width */ + WMI_VDEV_PARAM_NSS, + /* Set the custom rate for the broadcast data frames */ + WMI_VDEV_PARAM_BCAST_DATA_RATE, + /* Set the custom rate (rate-code) for multicast data frames */ + WMI_VDEV_PARAM_MCAST_DATA_RATE, + /* Tx multicast packet indicate Enable/Disable */ + WMI_VDEV_PARAM_MCAST_INDICATE, + /* Tx DHCP packet indicate Enable/Disable */ + WMI_VDEV_PARAM_DHCP_INDICATE, + /* Enable host inspection of Tx unicast packet to unknown destination */ + WMI_VDEV_PARAM_UNKNOWN_DEST_INDICATE, + + /* The minimum amount of time AP begins to consider STA inactive */ + WMI_VDEV_PARAM_AP_KEEPALIVE_MIN_IDLE_INACTIVE_TIME_SECS, + + /* + * An associated STA is considered inactive when there is no recent + * TX/RX activity and no downlink frames are buffered for it. Once a + * STA exceeds the maximum idle inactive time, the AP will send an + * 802.11 data-null as a keep alive to verify the STA is still + * associated. If the STA does ACK the data-null, or if the data-null + * is buffered and the STA does not retrieve it, the STA will be + * considered unresponsive + * (see WMI_VDEV_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS). + */ + WMI_VDEV_PARAM_AP_KEEPALIVE_MAX_IDLE_INACTIVE_TIME_SECS, + + /* + * An associated STA is considered unresponsive if there is no recent + * TX/RX activity and downlink frames are buffered for it. Once a STA + * exceeds the maximum unresponsive time, the AP will send a + * WMI_STA_KICKOUT event to the host so the STA can be deleted. */ + WMI_VDEV_PARAM_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS, + + /* Enable NAWDS : MCAST INSPECT Enable, NAWDS Flag set */ + WMI_VDEV_PARAM_AP_ENABLE_NAWDS, + /* Enable/Disable RTS-CTS */ + WMI_VDEV_PARAM_ENABLE_RTSCTS, + /* Enable TXBFee/er */ + WMI_VDEV_PARAM_TXBF, + + /* Set packet power save */ + WMI_VDEV_PARAM_PACKET_POWERSAVE, + + /* + * Drops un-encrypted packets if eceived in an encrypted connection + * otherwise forwards to host. + */ + WMI_VDEV_PARAM_DROP_UNENCRY, + + /* + * Set the encapsulation type for frames. + */ + WMI_VDEV_PARAM_TX_ENCAP_TYPE, +}; + +/* slot time long */ +#define WMI_VDEV_SLOT_TIME_LONG 0x1 +/* slot time short */ +#define WMI_VDEV_SLOT_TIME_SHORT 0x2 +/* preablbe long */ +#define WMI_VDEV_PREAMBLE_LONG 0x1 +/* preablbe short */ +#define WMI_VDEV_PREAMBLE_SHORT 0x2 + +enum wmi_start_event_param { + WMI_VDEV_RESP_START_EVENT = 0, + WMI_VDEV_RESP_RESTART_EVENT, +}; + +struct wmi_vdev_start_response_event { + __le32 vdev_id; + __le32 req_id; + __le32 resp_type; /* %WMI_VDEV_RESP_ */ + __le32 status; +} __packed; + +struct wmi_vdev_standby_req_event { + /* unique id identifying the VDEV, generated by the caller */ + __le32 vdev_id; +} __packed; + +struct wmi_vdev_resume_req_event { + /* unique id identifying the VDEV, generated by the caller */ + __le32 vdev_id; +} __packed; + +struct wmi_vdev_stopped_event { + /* unique id identifying the VDEV, generated by the caller */ + __le32 vdev_id; +} __packed; + +/* + * common structure used for simple events + * (stopped, resume_req, standby response) + */ +struct wmi_vdev_simple_event { + /* unique id identifying the VDEV, generated by the caller */ + __le32 vdev_id; +} __packed; + +/* VDEV start response status codes */ +/* VDEV succesfully started */ +#define WMI_INIFIED_VDEV_START_RESPONSE_STATUS_SUCCESS 0x0 + +/* requested VDEV not found */ +#define WMI_INIFIED_VDEV_START_RESPONSE_INVALID_VDEVID 0x1 + +/* unsupported VDEV combination */ +#define WMI_INIFIED_VDEV_START_RESPONSE_NOT_SUPPORTED 0x2 + +/* Beacon processing related command and event structures */ +struct wmi_bcn_tx_hdr { + __le32 vdev_id; + __le32 tx_rate; + __le32 tx_power; + __le32 bcn_len; +} __packed; + +struct wmi_bcn_tx_cmd { + struct wmi_bcn_tx_hdr hdr; + u8 *bcn[0]; +} __packed; + +struct wmi_bcn_tx_arg { + u32 vdev_id; + u32 tx_rate; + u32 tx_power; + u32 bcn_len; + const void *bcn; +}; + +/* Beacon filter */ +#define WMI_BCN_FILTER_ALL 0 /* Filter all beacons */ +#define WMI_BCN_FILTER_NONE 1 /* Pass all beacons */ +#define WMI_BCN_FILTER_RSSI 2 /* Pass Beacons RSSI >= RSSI threshold */ +#define WMI_BCN_FILTER_BSSID 3 /* Pass Beacons with matching BSSID */ +#define WMI_BCN_FILTER_SSID 4 /* Pass Beacons with matching SSID */ + +struct wmi_bcn_filter_rx_cmd { + /* Filter ID */ + __le32 bcn_filter_id; + /* Filter type - wmi_bcn_filter */ + __le32 bcn_filter; + /* Buffer len */ + __le32 bcn_filter_len; + /* Filter info (threshold, BSSID, RSSI) */ + u8 *bcn_filter_buf; +} __packed; + +/* Capabilities and IEs to be passed to firmware */ +struct wmi_bcn_prb_info { + /* Capabilities */ + __le32 caps; + /* ERP info */ + __le32 erp; + /* Advanced capabilities */ + /* HT capabilities */ + /* HT Info */ + /* ibss_dfs */ + /* wpa Info */ + /* rsn Info */ + /* rrm info */ + /* ath_ext */ + /* app IE */ +} __packed; + +struct wmi_bcn_tmpl_cmd { + /* unique id identifying the VDEV, generated by the caller */ + __le32 vdev_id; + /* TIM IE offset from the beginning of the template. */ + __le32 tim_ie_offset; + /* beacon probe capabilities and IEs */ + struct wmi_bcn_prb_info bcn_prb_info; + /* beacon buffer length */ + __le32 buf_len; + /* variable length data */ + u8 data[1]; +} __packed; + +struct wmi_prb_tmpl_cmd { + /* unique id identifying the VDEV, generated by the caller */ + __le32 vdev_id; + /* beacon probe capabilities and IEs */ + struct wmi_bcn_prb_info bcn_prb_info; + /* beacon buffer length */ + __le32 buf_len; + /* Variable length data */ + u8 data[1]; +} __packed; + +enum wmi_sta_ps_mode { + /* enable power save for the given STA VDEV */ + WMI_STA_PS_MODE_DISABLED = 0, + /* disable power save for a given STA VDEV */ + WMI_STA_PS_MODE_ENABLED = 1, +}; + +struct wmi_sta_powersave_mode_cmd { + /* unique id identifying the VDEV, generated by the caller */ + __le32 vdev_id; + + /* + * Power save mode + * (see enum wmi_sta_ps_mode) + */ + __le32 sta_ps_mode; +} __packed; + +enum wmi_csa_offload_en { + WMI_CSA_OFFLOAD_DISABLE = 0, + WMI_CSA_OFFLOAD_ENABLE = 1, +}; + +struct wmi_csa_offload_enable_cmd { + __le32 vdev_id; + __le32 csa_offload_enable; +} __packed; + +struct wmi_csa_offload_chanswitch_cmd { + __le32 vdev_id; + struct wmi_channel chan; +} __packed; + +/* + * This parameter controls the policy for retrieving frames from AP while the + * STA is in sleep state. + * + * Only takes affect if the sta_ps_mode is enabled + */ +enum wmi_sta_ps_param_rx_wake_policy { + /* + * Wake up when ever there is an RX activity on the VDEV. In this mode + * the Power save SM(state machine) will come out of sleep by either + * sending null frame (or) a data frame (with PS==0) in response to TIM + * bit set in the received beacon frame from AP. + */ + WMI_STA_PS_RX_WAKE_POLICY_WAKE = 0, + + /* + * Here the power save state machine will not wakeup in response to TIM + * bit, instead it will send a PSPOLL (or) UASPD trigger based on UAPSD + * configuration setup by WMISET_PS_SET_UAPSD WMI command. When all + * access categories are delivery-enabled, the station will send a + * UAPSD trigger frame, otherwise it will send a PS-Poll. + */ + WMI_STA_PS_RX_WAKE_POLICY_POLL_UAPSD = 1, +}; + +/* + * Number of tx frames/beacon that cause the power save SM to wake up. + * + * Value 1 causes the SM to wake up for every TX. Value 0 has a special + * meaning, It will cause the SM to never wake up. This is useful if you want + * to keep the system to sleep all the time for some kind of test mode . host + * can change this parameter any time. It will affect at the next tx frame. + */ +enum wmi_sta_ps_param_tx_wake_threshold { + WMI_STA_PS_TX_WAKE_THRESHOLD_NEVER = 0, + WMI_STA_PS_TX_WAKE_THRESHOLD_ALWAYS = 1, + + /* + * Values greater than one indicate that many TX attempts per beacon + * interval before the STA will wake up + */ +}; + +/* + * The maximum number of PS-Poll frames the FW will send in response to + * traffic advertised in TIM before waking up (by sending a null frame with PS + * = 0). Value 0 has a special meaning: there is no maximum count and the FW + * will send as many PS-Poll as are necessary to retrieve buffered BU. This + * parameter is used when the RX wake policy is + * WMI_STA_PS_RX_WAKE_POLICY_POLL_UAPSD and ignored when the RX wake + * policy is WMI_STA_PS_RX_WAKE_POLICY_WAKE. + */ +enum wmi_sta_ps_param_pspoll_count { + WMI_STA_PS_PSPOLL_COUNT_NO_MAX = 0, + /* + * Values greater than 0 indicate the maximum numer of PS-Poll frames + * FW will send before waking up. + */ +}; + +/* + * This will include the delivery and trigger enabled state for every AC. + * This is the negotiated state with AP. The host MLME needs to set this based + * on AP capability and the state Set in the association request by the + * station MLME.Lower 8 bits of the value specify the UAPSD configuration. + */ +#define WMI_UAPSD_AC_TYPE_DELI 0 +#define WMI_UAPSD_AC_TYPE_TRIG 1 + +#define WMI_UAPSD_AC_BIT_MASK(ac, type) \ + ((type == WMI_UAPSD_AC_TYPE_DELI) ? (1<<(ac<<1)) : (1<<((ac<<1)+1))) + +enum wmi_sta_ps_param_uapsd { + WMI_STA_PS_UAPSD_AC0_DELIVERY_EN = (1 << 0), + WMI_STA_PS_UAPSD_AC0_TRIGGER_EN = (1 << 1), + WMI_STA_PS_UAPSD_AC1_DELIVERY_EN = (1 << 2), + WMI_STA_PS_UAPSD_AC1_TRIGGER_EN = (1 << 3), + WMI_STA_PS_UAPSD_AC2_DELIVERY_EN = (1 << 4), + WMI_STA_PS_UAPSD_AC2_TRIGGER_EN = (1 << 5), + WMI_STA_PS_UAPSD_AC3_DELIVERY_EN = (1 << 6), + WMI_STA_PS_UAPSD_AC3_TRIGGER_EN = (1 << 7), +}; + +enum wmi_sta_powersave_param { + /* + * Controls how frames are retrievd from AP while STA is sleeping + * + * (see enum wmi_sta_ps_param_rx_wake_policy) + */ + WMI_STA_PS_PARAM_RX_WAKE_POLICY = 0, + + /* + * The STA will go active after this many TX + * + * (see enum wmi_sta_ps_param_tx_wake_threshold) + */ + WMI_STA_PS_PARAM_TX_WAKE_THRESHOLD = 1, + + /* + * Number of PS-Poll to send before STA wakes up + * + * (see enum wmi_sta_ps_param_pspoll_count) + * + */ + WMI_STA_PS_PARAM_PSPOLL_COUNT = 2, + + /* + * TX/RX inactivity time in msec before going to sleep. + * + * The power save SM will monitor tx/rx activity on the VDEV, if no + * activity for the specified msec of the parameter the Power save + * SM will go to sleep. + */ + WMI_STA_PS_PARAM_INACTIVITY_TIME = 3, + + /* + * Set uapsd configuration. + * + * (see enum wmi_sta_ps_param_uapsd) + */ + WMI_STA_PS_PARAM_UAPSD = 4, +}; + +struct wmi_sta_powersave_param_cmd { + __le32 vdev_id; + __le32 param_id; /* %WMI_STA_PS_PARAM_ */ + __le32 param_value; +} __packed; + +/* No MIMO power save */ +#define WMI_STA_MIMO_PS_MODE_DISABLE +/* mimo powersave mode static*/ +#define WMI_STA_MIMO_PS_MODE_STATIC +/* mimo powersave mode dynamic */ +#define WMI_STA_MIMO_PS_MODE_DYNAMIC + +struct wmi_sta_mimo_ps_mode_cmd { + /* unique id identifying the VDEV, generated by the caller */ + __le32 vdev_id; + /* mimo powersave mode as defined above */ + __le32 mimo_pwrsave_mode; +} __packed; + +/* U-APSD configuration of peer station from (re)assoc request and TSPECs */ +enum wmi_ap_ps_param_uapsd { + WMI_AP_PS_UAPSD_AC0_DELIVERY_EN = (1 << 0), + WMI_AP_PS_UAPSD_AC0_TRIGGER_EN = (1 << 1), + WMI_AP_PS_UAPSD_AC1_DELIVERY_EN = (1 << 2), + WMI_AP_PS_UAPSD_AC1_TRIGGER_EN = (1 << 3), + WMI_AP_PS_UAPSD_AC2_DELIVERY_EN = (1 << 4), + WMI_AP_PS_UAPSD_AC2_TRIGGER_EN = (1 << 5), + WMI_AP_PS_UAPSD_AC3_DELIVERY_EN = (1 << 6), + WMI_AP_PS_UAPSD_AC3_TRIGGER_EN = (1 << 7), +}; + +/* U-APSD maximum service period of peer station */ +enum wmi_ap_ps_peer_param_max_sp { + WMI_AP_PS_PEER_PARAM_MAX_SP_UNLIMITED = 0, + WMI_AP_PS_PEER_PARAM_MAX_SP_2 = 1, + WMI_AP_PS_PEER_PARAM_MAX_SP_4 = 2, + WMI_AP_PS_PEER_PARAM_MAX_SP_6 = 3, + MAX_WMI_AP_PS_PEER_PARAM_MAX_SP, +}; + +/* + * AP power save parameter + * Set a power save specific parameter for a peer station + */ +enum wmi_ap_ps_peer_param { + /* Set uapsd configuration for a given peer. + * + * Include the delivery and trigger enabled state for every AC. + * The host MLME needs to set this based on AP capability and stations + * request Set in the association request received from the station. + * + * Lower 8 bits of the value specify the UAPSD configuration. + * + * (see enum wmi_ap_ps_param_uapsd) + * The default value is 0. + */ + WMI_AP_PS_PEER_PARAM_UAPSD = 0, + + /* + * Set the service period for a UAPSD capable station + * + * The service period from wme ie in the (re)assoc request frame. + * + * (see enum wmi_ap_ps_peer_param_max_sp) + */ + WMI_AP_PS_PEER_PARAM_MAX_SP = 1, + + /* Time in seconds for aging out buffered frames for STA in PS */ + WMI_AP_PS_PEER_PARAM_AGEOUT_TIME = 2, +}; + +struct wmi_ap_ps_peer_cmd { + /* unique id identifying the VDEV, generated by the caller */ + __le32 vdev_id; + + /* peer MAC address */ + struct wmi_mac_addr peer_macaddr; + + /* AP powersave param (see enum wmi_ap_ps_peer_param) */ + __le32 param_id; + + /* AP powersave param value */ + __le32 param_value; +} __packed; + +/* 128 clients = 4 words */ +#define WMI_TIM_BITMAP_ARRAY_SIZE 4 + +struct wmi_tim_info { + __le32 tim_len; + __le32 tim_mcast; + __le32 tim_bitmap[WMI_TIM_BITMAP_ARRAY_SIZE]; + __le32 tim_changed; + __le32 tim_num_ps_pending; +} __packed; + +/* Maximum number of NOA Descriptors supported */ +#define WMI_P2P_MAX_NOA_DESCRIPTORS 4 +#define WMI_P2P_OPPPS_ENABLE_BIT BIT(0) +#define WMI_P2P_OPPPS_CTWINDOW_OFFSET 1 +#define WMI_P2P_NOA_CHANGED_BIT BIT(0) + +struct wmi_p2p_noa_info { + /* Bit 0 - Flag to indicate an update in NOA schedule + Bits 7-1 - Reserved */ + u8 changed; + /* NOA index */ + u8 index; + /* Bit 0 - Opp PS state of the AP + Bits 1-7 - Ctwindow in TUs */ + u8 ctwindow_oppps; + /* Number of NOA descriptors */ + u8 num_descriptors; + + struct wmi_p2p_noa_descriptor descriptors[WMI_P2P_MAX_NOA_DESCRIPTORS]; +} __packed; + +struct wmi_bcn_info { + struct wmi_tim_info tim_info; + struct wmi_p2p_noa_info p2p_noa_info; +} __packed; + +struct wmi_host_swba_event { + __le32 vdev_map; + struct wmi_bcn_info bcn_info[1]; +} __packed; + +#define WMI_MAX_AP_VDEV 16 + +struct wmi_tbtt_offset_event { + __le32 vdev_map; + __le32 tbttoffset_list[WMI_MAX_AP_VDEV]; +} __packed; + + +struct wmi_peer_create_cmd { + __le32 vdev_id; + struct wmi_mac_addr peer_macaddr; +} __packed; + +struct wmi_peer_delete_cmd { + __le32 vdev_id; + struct wmi_mac_addr peer_macaddr; +} __packed; + +struct wmi_peer_flush_tids_cmd { + __le32 vdev_id; + struct wmi_mac_addr peer_macaddr; + __le32 peer_tid_bitmap; +} __packed; + +struct wmi_fixed_rate { + /* + * rate mode . 0: disable fixed rate (auto rate) + * 1: legacy (non 11n) rate specified as ieee rate 2*Mbps + * 2: ht20 11n rate specified as mcs index + * 3: ht40 11n rate specified as mcs index + */ + __le32 rate_mode; + /* + * 4 rate values for 4 rate series. series 0 is stored in byte 0 (LSB) + * and series 3 is stored at byte 3 (MSB) + */ + __le32 rate_series; + /* + * 4 retry counts for 4 rate series. retry count for rate 0 is stored + * in byte 0 (LSB) and retry count for rate 3 is stored at byte 3 + * (MSB) + */ + __le32 rate_retries; +} __packed; + +struct wmi_peer_fixed_rate_cmd { + /* unique id identifying the VDEV, generated by the caller */ + __le32 vdev_id; + /* peer MAC address */ + struct wmi_mac_addr peer_macaddr; + /* fixed rate */ + struct wmi_fixed_rate peer_fixed_rate; +} __packed; + +#define WMI_MGMT_TID 17 + +struct wmi_addba_clear_resp_cmd { + /* unique id identifying the VDEV, generated by the caller */ + __le32 vdev_id; + /* peer MAC address */ + struct wmi_mac_addr peer_macaddr; +} __packed; + +struct wmi_addba_send_cmd { + /* unique id identifying the VDEV, generated by the caller */ + __le32 vdev_id; + /* peer MAC address */ + struct wmi_mac_addr peer_macaddr; + /* Tid number */ + __le32 tid; + /* Buffer/Window size*/ + __le32 buffersize; +} __packed; + +struct wmi_delba_send_cmd { + /* unique id identifying the VDEV, generated by the caller */ + __le32 vdev_id; + /* peer MAC address */ + struct wmi_mac_addr peer_macaddr; + /* Tid number */ + __le32 tid; + /* Is Initiator */ + __le32 initiator; + /* Reason code */ + __le32 reasoncode; +} __packed; + +struct wmi_addba_setresponse_cmd { + /* unique id identifying the vdev, generated by the caller */ + __le32 vdev_id; + /* peer mac address */ + struct wmi_mac_addr peer_macaddr; + /* Tid number */ + __le32 tid; + /* status code */ + __le32 statuscode; +} __packed; + +struct wmi_send_singleamsdu_cmd { + /* unique id identifying the vdev, generated by the caller */ + __le32 vdev_id; + /* peer mac address */ + struct wmi_mac_addr peer_macaddr; + /* Tid number */ + __le32 tid; +} __packed; + +enum wmi_peer_smps_state { + WMI_PEER_SMPS_PS_NONE = 0x0, + WMI_PEER_SMPS_STATIC = 0x1, + WMI_PEER_SMPS_DYNAMIC = 0x2 +}; + +enum wmi_peer_param { + WMI_PEER_SMPS_STATE = 0x1, /* see %wmi_peer_smps_state */ + WMI_PEER_AMPDU = 0x2, + WMI_PEER_AUTHORIZE = 0x3, + WMI_PEER_CHAN_WIDTH = 0x4, + WMI_PEER_NSS = 0x5, + WMI_PEER_USE_4ADDR = 0x6 +}; + +struct wmi_peer_set_param_cmd { + __le32 vdev_id; + struct wmi_mac_addr peer_macaddr; + __le32 param_id; + __le32 param_value; +} __packed; + +#define MAX_SUPPORTED_RATES 128 + +struct wmi_rate_set { + /* total number of rates */ + __le32 num_rates; + /* + * rates (each 8bit value) packed into a 32 bit word. + * the rates are filled from least significant byte to most + * significant byte. + */ + __le32 rates[(MAX_SUPPORTED_RATES/4)+1]; +} __packed; + +struct wmi_rate_set_arg { + unsigned int num_rates; + u8 rates[MAX_SUPPORTED_RATES]; +}; + +/* + * NOTE: It would bea good idea to represent the Tx MCS + * info in one word and Rx in another word. This is split + * into multiple words for convenience + */ +struct wmi_vht_rate_set { + __le32 rx_max_rate; /* Max Rx data rate */ + __le32 rx_mcs_set; /* Negotiated RX VHT rates */ + __le32 tx_max_rate; /* Max Tx data rate */ + __le32 tx_mcs_set; /* Negotiated TX VHT rates */ +} __packed; + +struct wmi_vht_rate_set_arg { + u32 rx_max_rate; + u32 rx_mcs_set; + u32 tx_max_rate; + u32 tx_mcs_set; +}; + +struct wmi_peer_set_rates_cmd { + /* peer MAC address */ + struct wmi_mac_addr peer_macaddr; + /* legacy rate set */ + struct wmi_rate_set peer_legacy_rates; + /* ht rate set */ + struct wmi_rate_set peer_ht_rates; +} __packed; + +struct wmi_peer_set_q_empty_callback_cmd { + /* unique id identifying the VDEV, generated by the caller */ + __le32 vdev_id; + /* peer MAC address */ + struct wmi_mac_addr peer_macaddr; + __le32 callback_enable; +} __packed; + +#define WMI_PEER_AUTH 0x00000001 +#define WMI_PEER_QOS 0x00000002 +#define WMI_PEER_NEED_PTK_4_WAY 0x00000004 +#define WMI_PEER_NEED_GTK_2_WAY 0x00000010 +#define WMI_PEER_APSD 0x00000800 +#define WMI_PEER_HT 0x00001000 +#define WMI_PEER_40MHZ 0x00002000 +#define WMI_PEER_STBC 0x00008000 +#define WMI_PEER_LDPC 0x00010000 +#define WMI_PEER_DYN_MIMOPS 0x00020000 +#define WMI_PEER_STATIC_MIMOPS 0x00040000 +#define WMI_PEER_SPATIAL_MUX 0x00200000 +#define WMI_PEER_VHT 0x02000000 +#define WMI_PEER_80MHZ 0x04000000 +#define WMI_PEER_PMF 0x08000000 + +/* + * Peer rate capabilities. + * + * This is of interest to the ratecontrol + * module which resides in the firmware. The bit definitions are + * consistent with that defined in if_athrate.c. + */ +#define WMI_RC_DS_FLAG 0x01 +#define WMI_RC_CW40_FLAG 0x02 +#define WMI_RC_SGI_FLAG 0x04 +#define WMI_RC_HT_FLAG 0x08 +#define WMI_RC_RTSCTS_FLAG 0x10 +#define WMI_RC_TX_STBC_FLAG 0x20 +#define WMI_RC_RX_STBC_FLAG 0xC0 +#define WMI_RC_RX_STBC_FLAG_S 6 +#define WMI_RC_WEP_TKIP_FLAG 0x100 +#define WMI_RC_TS_FLAG 0x200 +#define WMI_RC_UAPSD_FLAG 0x400 + +/* Maximum listen interval supported by hw in units of beacon interval */ +#define ATH10K_MAX_HW_LISTEN_INTERVAL 5 + +struct wmi_peer_assoc_complete_cmd { + struct wmi_mac_addr peer_macaddr; + __le32 vdev_id; + __le32 peer_new_assoc; /* 1=assoc, 0=reassoc */ + __le32 peer_associd; /* 16 LSBs */ + __le32 peer_flags; + __le32 peer_caps; /* 16 LSBs */ + __le32 peer_listen_intval; + __le32 peer_ht_caps; + __le32 peer_max_mpdu; + __le32 peer_mpdu_density; /* 0..16 */ + __le32 peer_rate_caps; + struct wmi_rate_set peer_legacy_rates; + struct wmi_rate_set peer_ht_rates; + __le32 peer_nss; /* num of spatial streams */ + __le32 peer_vht_caps; + __le32 peer_phymode; + struct wmi_vht_rate_set peer_vht_rates; + /* HT Operation Element of the peer. Five bytes packed in 2 + * INT32 array and filled from lsb to msb. */ + __le32 peer_ht_info[2]; +} __packed; + +struct wmi_peer_assoc_complete_arg { + u8 addr[ETH_ALEN]; + u32 vdev_id; + bool peer_reassoc; + u16 peer_aid; + u32 peer_flags; /* see %WMI_PEER_ */ + u16 peer_caps; + u32 peer_listen_intval; + u32 peer_ht_caps; + u32 peer_max_mpdu; + u32 peer_mpdu_density; /* 0..16 */ + u32 peer_rate_caps; /* see %WMI_RC_ */ + struct wmi_rate_set_arg peer_legacy_rates; + struct wmi_rate_set_arg peer_ht_rates; + u32 peer_num_spatial_streams; + u32 peer_vht_caps; + enum wmi_phy_mode peer_phymode; + struct wmi_vht_rate_set_arg peer_vht_rates; +}; + +struct wmi_peer_add_wds_entry_cmd { + /* peer MAC address */ + struct wmi_mac_addr peer_macaddr; + /* wds MAC addr */ + struct wmi_mac_addr wds_macaddr; +} __packed; + +struct wmi_peer_remove_wds_entry_cmd { + /* wds MAC addr */ + struct wmi_mac_addr wds_macaddr; +} __packed; + +struct wmi_peer_q_empty_callback_event { + /* peer MAC address */ + struct wmi_mac_addr peer_macaddr; +} __packed; + +/* + * Channel info WMI event + */ +struct wmi_chan_info_event { + __le32 err_code; + __le32 freq; + __le32 cmd_flags; + __le32 noise_floor; + __le32 rx_clear_count; + __le32 cycle_count; +} __packed; + +/* Beacon filter wmi command info */ +#define BCN_FLT_MAX_SUPPORTED_IES 256 +#define BCN_FLT_MAX_ELEMS_IE_LIST (BCN_FLT_MAX_SUPPORTED_IES / 32) + +struct bss_bcn_stats { + __le32 vdev_id; + __le32 bss_bcnsdropped; + __le32 bss_bcnsdelivered; +} __packed; + +struct bcn_filter_stats { + __le32 bcns_dropped; + __le32 bcns_delivered; + __le32 activefilters; + struct bss_bcn_stats bss_stats; +} __packed; + +struct wmi_add_bcn_filter_cmd { + u32 vdev_id; + u32 ie_map[BCN_FLT_MAX_ELEMS_IE_LIST]; +} __packed; + +enum wmi_sta_keepalive_method { + WMI_STA_KEEPALIVE_METHOD_NULL_FRAME = 1, + WMI_STA_KEEPALIVE_METHOD_UNSOLICITATED_ARP_RESPONSE = 2, +}; + +/* note: ip4 addresses are in network byte order, i.e. big endian */ +struct wmi_sta_keepalive_arp_resp { + __be32 src_ip4_addr; + __be32 dest_ip4_addr; + struct wmi_mac_addr dest_mac_addr; +} __packed; + +struct wmi_sta_keepalive_cmd { + __le32 vdev_id; + __le32 enabled; + __le32 method; /* WMI_STA_KEEPALIVE_METHOD_ */ + __le32 interval; /* in seconds */ + struct wmi_sta_keepalive_arp_resp arp_resp; +} __packed; + +#define ATH10K_RTS_MAX 2347 +#define ATH10K_FRAGMT_THRESHOLD_MIN 540 +#define ATH10K_FRAGMT_THRESHOLD_MAX 2346 + +#define WMI_MAX_EVENT 0x1000 +/* Maximum number of pending TXed WMI packets */ +#define WMI_MAX_PENDING_TX_COUNT 128 +#define WMI_SKB_HEADROOM sizeof(struct wmi_cmd_hdr) + +/* By default disable power save for IBSS */ +#define ATH10K_DEFAULT_ATIM 0 + +struct ath10k; +struct ath10k_vif; + +int ath10k_wmi_attach(struct ath10k *ar); +void ath10k_wmi_detach(struct ath10k *ar); +int ath10k_wmi_wait_for_service_ready(struct ath10k *ar); +int ath10k_wmi_wait_for_unified_ready(struct ath10k *ar); +void ath10k_wmi_flush_tx(struct ath10k *ar); + +int ath10k_wmi_connect_htc_service(struct ath10k *ar); +int ath10k_wmi_pdev_set_channel(struct ath10k *ar, + const struct wmi_channel_arg *); +int ath10k_wmi_pdev_suspend_target(struct ath10k *ar); +int ath10k_wmi_pdev_resume_target(struct ath10k *ar); +int ath10k_wmi_pdev_set_regdomain(struct ath10k *ar, u16 rd, u16 rd2g, + u16 rd5g, u16 ctl2g, u16 ctl5g); +int ath10k_wmi_pdev_set_param(struct ath10k *ar, enum wmi_pdev_param id, + u32 value); +int ath10k_wmi_cmd_init(struct ath10k *ar); +int ath10k_wmi_start_scan(struct ath10k *ar, const struct wmi_start_scan_arg *); +void ath10k_wmi_start_scan_init(struct ath10k *ar, struct wmi_start_scan_arg *); +int ath10k_wmi_stop_scan(struct ath10k *ar, + const struct wmi_stop_scan_arg *arg); +int ath10k_wmi_vdev_create(struct ath10k *ar, u32 vdev_id, + enum wmi_vdev_type type, + enum wmi_vdev_subtype subtype, + const u8 macaddr[ETH_ALEN]); +int ath10k_wmi_vdev_delete(struct ath10k *ar, u32 vdev_id); +int ath10k_wmi_vdev_start(struct ath10k *ar, + const struct wmi_vdev_start_request_arg *); +int ath10k_wmi_vdev_restart(struct ath10k *ar, + const struct wmi_vdev_start_request_arg *); +int ath10k_wmi_vdev_stop(struct ath10k *ar, u32 vdev_id); +int ath10k_wmi_vdev_up(struct ath10k *ar, u32 vdev_id, u32 aid, + const u8 *bssid); +int ath10k_wmi_vdev_down(struct ath10k *ar, u32 vdev_id); +int ath10k_wmi_vdev_set_param(struct ath10k *ar, u32 vdev_id, + enum wmi_vdev_param param_id, u32 param_value); +int ath10k_wmi_vdev_install_key(struct ath10k *ar, + const struct wmi_vdev_install_key_arg *arg); +int ath10k_wmi_peer_create(struct ath10k *ar, u32 vdev_id, + const u8 peer_addr[ETH_ALEN]); +int ath10k_wmi_peer_delete(struct ath10k *ar, u32 vdev_id, + const u8 peer_addr[ETH_ALEN]); +int ath10k_wmi_peer_flush(struct ath10k *ar, u32 vdev_id, + const u8 peer_addr[ETH_ALEN], u32 tid_bitmap); +int ath10k_wmi_peer_set_param(struct ath10k *ar, u32 vdev_id, + const u8 *peer_addr, + enum wmi_peer_param param_id, u32 param_value); +int ath10k_wmi_peer_assoc(struct ath10k *ar, + const struct wmi_peer_assoc_complete_arg *arg); +int ath10k_wmi_set_psmode(struct ath10k *ar, u32 vdev_id, + enum wmi_sta_ps_mode psmode); +int ath10k_wmi_set_sta_ps_param(struct ath10k *ar, u32 vdev_id, + enum wmi_sta_powersave_param param_id, + u32 value); +int ath10k_wmi_set_ap_ps_param(struct ath10k *ar, u32 vdev_id, const u8 *mac, + enum wmi_ap_ps_peer_param param_id, u32 value); +int ath10k_wmi_scan_chan_list(struct ath10k *ar, + const struct wmi_scan_chan_list_arg *arg); +int ath10k_wmi_beacon_send(struct ath10k *ar, const struct wmi_bcn_tx_arg *arg); +int ath10k_wmi_pdev_set_wmm_params(struct ath10k *ar, + const struct wmi_pdev_set_wmm_params_arg *arg); +int ath10k_wmi_request_stats(struct ath10k *ar, enum wmi_stats_id stats_id); + +#endif /* _WMI_H_ */ |