diff options
author | Stephen Hemminger <shemminger@vyatta.com> | 2009-10-01 07:11:46 +0000 |
---|---|---|
committer | David S. Miller <davem@davemloft.net> | 2009-10-01 15:14:55 -0700 |
commit | 66466797c7e2406579724e42eb9cfe05d53a882b (patch) | |
tree | 59cba1a51a5a1911aca1608af473c907b7b077af /drivers/net/sky2.c | |
parent | 415e69e6574ab740e5db56152055eb899e7ac86e (diff) |
sky2: irqname based on pci address
This is based on Michal Schmidt fix for skge.
Most network drivers request their IRQ when the interface is activated.
sky2 does it in ->probe() instead, because it can work with two-port
cards where the two net_devices use the same IRQ. This works fine most
of the time, except in some situations when the interface gets renamed.
Consider this example:
1. modprobe sky2
The card is detected as eth0 and requests IRQ 17. Directory
/proc/irq/17/eth0 is created.
2. There is an udev rule which says this interface should be called
eth1, so udev renames eth0 -> eth1.
3. modprobe 8139too
The Realtek card is detected as eth0. It will be using IRQ 17 too.
4. ip link set eth0 up
Now 8139too requests IRQ 17.
The result is:
WARNING: at fs/proc/generic.c:590 proc_register ...
proc_dir_entry '17/eth0' already registered
The fix is for sky2 to name the irq based on the pci device, as is done
by some other devices DRM, infiniband, ... ie. sky2@pci:0000:00:00
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Reviewed-by: Michal Schmidt <mschmidt@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net/sky2.c')
-rw-r--r-- | drivers/net/sky2.c | 7 |
1 files changed, 5 insertions, 2 deletions
diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index ef1165718dd7..2ab5c39f33ca 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -4487,13 +4487,16 @@ static int __devinit sky2_probe(struct pci_dev *pdev, wol_default = device_may_wakeup(&pdev->dev) ? WAKE_MAGIC : 0; err = -ENOMEM; - hw = kzalloc(sizeof(*hw), GFP_KERNEL); + + hw = kzalloc(sizeof(*hw) + strlen(DRV_NAME "@pci:") + + strlen(pci_name(pdev)) + 1, GFP_KERNEL); if (!hw) { dev_err(&pdev->dev, "cannot allocate hardware struct\n"); goto err_out_free_regions; } hw->pdev = pdev; + sprintf(hw->irq_name, DRV_NAME "@pci:%s", pci_name(pdev)); hw->regs = ioremap_nocache(pci_resource_start(pdev, 0), 0x4000); if (!hw->regs) { @@ -4539,7 +4542,7 @@ static int __devinit sky2_probe(struct pci_dev *pdev, err = request_irq(pdev->irq, sky2_intr, (hw->flags & SKY2_HW_USE_MSI) ? 0 : IRQF_SHARED, - dev->name, hw); + hw->irq_name, hw); if (err) { dev_err(&pdev->dev, "cannot assign irq %d\n", pdev->irq); goto err_out_unregister; |