diff options
| author | Heiner Kallweit <hkallweit1@gmail.com> | 2022-03-03 08:54:15 +0100 |
|---|---|---|
| committer | Jakub Kicinski <kuba@kernel.org> | 2022-03-04 21:03:45 -0800 |
| commit | a502a8f04097e038c3daa16c5202a9538116d563 (patch) | |
| tree | 8ad3b8847862969ec633bbeab98f0b5835eab8d0 /drivers/net/phy | |
| parent | be4977b847f5d5cedb64d50eaaf2218c3a55a3a3 (diff) | |
net: phy: meson-gxl: fix interrupt handling in forced mode
This PHY doesn't support a link-up interrupt source. If aneg is enabled
we use the "aneg complete" interrupt for this purpose, but if aneg is
disabled link-up isn't signaled currently.
According to a vendor driver there's an additional "energy detect"
interrupt source that can be used to signal link-up if aneg is disabled.
We can safely ignore this interrupt source if aneg is enabled.
This patch was tested on a TX3 Mini TV box with S905W (even though
boot message says it's a S905D).
This issue has been existing longer, but due to changes in phylib and
the driver the patch applies only from the commit marked as fixed.
Fixes: 84c8f773d2dc ("net: phy: meson-gxl: remove the use of .ack_callback()")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/04cac530-ea1b-850e-6cfa-144a55c4d75d@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Diffstat (limited to 'drivers/net/phy')
| -rw-r--r-- | drivers/net/phy/meson-gxl.c | 23 |
1 files changed, 13 insertions, 10 deletions
diff --git a/drivers/net/phy/meson-gxl.c b/drivers/net/phy/meson-gxl.c index 7e7904fee1d9..c49062ad72c6 100644 --- a/drivers/net/phy/meson-gxl.c +++ b/drivers/net/phy/meson-gxl.c @@ -30,8 +30,12 @@ #define INTSRC_LINK_DOWN BIT(4) #define INTSRC_REMOTE_FAULT BIT(5) #define INTSRC_ANEG_COMPLETE BIT(6) +#define INTSRC_ENERGY_DETECT BIT(7) #define INTSRC_MASK 30 +#define INT_SOURCES (INTSRC_LINK_DOWN | INTSRC_ANEG_COMPLETE | \ + INTSRC_ENERGY_DETECT) + #define BANK_ANALOG_DSP 0 #define BANK_WOL 1 #define BANK_BIST 3 @@ -200,7 +204,6 @@ static int meson_gxl_ack_interrupt(struct phy_device *phydev) static int meson_gxl_config_intr(struct phy_device *phydev) { - u16 val; int ret; if (phydev->interrupts == PHY_INTERRUPT_ENABLED) { @@ -209,16 +212,9 @@ static int meson_gxl_config_intr(struct phy_device *phydev) if (ret) return ret; - val = INTSRC_ANEG_PR - | INTSRC_PARALLEL_FAULT - | INTSRC_ANEG_LP_ACK - | INTSRC_LINK_DOWN - | INTSRC_REMOTE_FAULT - | INTSRC_ANEG_COMPLETE; - ret = phy_write(phydev, INTSRC_MASK, val); + ret = phy_write(phydev, INTSRC_MASK, INT_SOURCES); } else { - val = 0; - ret = phy_write(phydev, INTSRC_MASK, val); + ret = phy_write(phydev, INTSRC_MASK, 0); /* Ack any pending IRQ */ ret = meson_gxl_ack_interrupt(phydev); @@ -237,9 +233,16 @@ static irqreturn_t meson_gxl_handle_interrupt(struct phy_device *phydev) return IRQ_NONE; } + irq_status &= INT_SOURCES; + if (irq_status == 0) return IRQ_NONE; + /* Aneg-complete interrupt is used for link-up detection */ + if (phydev->autoneg == AUTONEG_ENABLE && + irq_status == INTSRC_ENERGY_DETECT) + return IRQ_HANDLED; + phy_trigger_machine(phydev); return IRQ_HANDLED; |