ks8*/ksz8*: Move the Micrel drivers

Move the Micrel drivers into drivers/net/ethernet/micrel/ and
make the necessary Kconfig and Makefile changes.

CC: Ben Dooks <ben@simtec.co.uk>
CC: Tristram Ha <Tristram.Ha@micrel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

1 files changed, 0 insertions, 1284 deletions

diff --git a/drivers/net/ks8842.c b/drivers/net/ks8842.c
deleted file mode 100644
index 4a6ae057e3b1..000000000000
--- a/drivers/net/ks8842.c
+++ /dev/null
@@ -1,1284 +0,0 @@
-/*
- * ks8842.c timberdale KS8842 ethernet driver
- * Copyright (c) 2009 Intel Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-/* Supports:
- * The Micrel KS8842 behind the timberdale FPGA
- * The genuine Micrel KS8841/42 device with ISA 16/32bit bus interface
- */
-
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
-#include <linux/interrupt.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/ethtool.h>
-#include <linux/ks8842.h>
-#include <linux/dmaengine.h>
-#include <linux/dma-mapping.h>
-#include <linux/scatterlist.h>
-
-#define DRV_NAME "ks8842"
-
-/* Timberdale specific Registers */
-#define REG_TIMB_RST		0x1c
-#define REG_TIMB_FIFO		0x20
-#define REG_TIMB_ISR		0x24
-#define REG_TIMB_IER		0x28
-#define REG_TIMB_IAR		0x2C
-#define REQ_TIMB_DMA_RESUME	0x30
-
-/* KS8842 registers */
-
-#define REG_SELECT_BANK 0x0e
-
-/* bank 0 registers */
-#define REG_QRFCR	0x04
-
-/* bank 2 registers */
-#define REG_MARL	0x00
-#define REG_MARM	0x02
-#define REG_MARH	0x04
-
-/* bank 3 registers */
-#define REG_GRR		0x06
-
-/* bank 16 registers */
-#define REG_TXCR	0x00
-#define REG_TXSR	0x02
-#define REG_RXCR	0x04
-#define REG_TXMIR	0x08
-#define REG_RXMIR	0x0A
-
-/* bank 17 registers */
-#define REG_TXQCR	0x00
-#define REG_RXQCR	0x02
-#define REG_TXFDPR	0x04
-#define REG_RXFDPR	0x06
-#define REG_QMU_DATA_LO 0x08
-#define REG_QMU_DATA_HI 0x0A
-
-/* bank 18 registers */
-#define REG_IER		0x00
-#define IRQ_LINK_CHANGE	0x8000
-#define IRQ_TX		0x4000
-#define IRQ_RX		0x2000
-#define IRQ_RX_OVERRUN	0x0800
-#define IRQ_TX_STOPPED	0x0200
-#define IRQ_RX_STOPPED	0x0100
-#define IRQ_RX_ERROR	0x0080
-#define ENABLED_IRQS	(IRQ_LINK_CHANGE | IRQ_TX | IRQ_RX | IRQ_RX_STOPPED | \
-		IRQ_TX_STOPPED | IRQ_RX_OVERRUN | IRQ_RX_ERROR)
-/* When running via timberdale in DMA mode, the RX interrupt should be
-   enabled in the KS8842, but not in the FPGA IP, since the IP handles
-   RX DMA internally.
-   TX interrupts are not needed it is handled by the FPGA the driver is
-   notified via DMA callbacks.
-*/
-#define ENABLED_IRQS_DMA_IP	(IRQ_LINK_CHANGE | IRQ_RX_STOPPED | \
-	IRQ_TX_STOPPED | IRQ_RX_OVERRUN | IRQ_RX_ERROR)
-#define ENABLED_IRQS_DMA	(ENABLED_IRQS_DMA_IP | IRQ_RX)
-#define REG_ISR		0x02
-#define REG_RXSR	0x04
-#define RXSR_VALID	0x8000
-#define RXSR_BROADCAST	0x80
-#define RXSR_MULTICAST	0x40
-#define RXSR_UNICAST	0x20
-#define RXSR_FRAMETYPE	0x08
-#define RXSR_TOO_LONG	0x04
-#define RXSR_RUNT	0x02
-#define RXSR_CRC_ERROR	0x01
-#define RXSR_ERROR	(RXSR_TOO_LONG | RXSR_RUNT | RXSR_CRC_ERROR)
-
-/* bank 32 registers */
-#define REG_SW_ID_AND_ENABLE	0x00
-#define REG_SGCR1		0x02
-#define REG_SGCR2		0x04
-#define REG_SGCR3		0x06
-
-/* bank 39 registers */
-#define REG_MACAR1		0x00
-#define REG_MACAR2		0x02
-#define REG_MACAR3		0x04
-
-/* bank 45 registers */
-#define REG_P1MBCR		0x00
-#define REG_P1MBSR		0x02
-
-/* bank 46 registers */
-#define REG_P2MBCR		0x00
-#define REG_P2MBSR		0x02
-
-/* bank 48 registers */
-#define REG_P1CR2		0x02
-
-/* bank 49 registers */
-#define REG_P1CR4		0x02
-#define REG_P1SR		0x04
-
-/* flags passed by platform_device for configuration */
-#define	MICREL_KS884X		0x01	/* 0=Timeberdale(FPGA), 1=Micrel */
-#define	KS884X_16BIT		0x02	/*  1=16bit, 0=32bit */
-
-#define DMA_BUFFER_SIZE		2048
-
-struct ks8842_tx_dma_ctl {
-	struct dma_chan *chan;
-	struct dma_async_tx_descriptor *adesc;
-	void *buf;
-	struct scatterlist sg;
-	int channel;
-};
-
-struct ks8842_rx_dma_ctl {
-	struct dma_chan *chan;
-	struct dma_async_tx_descriptor *adesc;
-	struct sk_buff  *skb;
-	struct scatterlist sg;
-	struct tasklet_struct tasklet;
-	int channel;
-};
-
-#define KS8842_USE_DMA(adapter) (((adapter)->dma_tx.channel != -1) && \
-	 ((adapter)->dma_rx.channel != -1))
-
-struct ks8842_adapter {
-	void __iomem	*hw_addr;
-	int		irq;
-	unsigned long	conf_flags;	/* copy of platform_device config */
-	struct tasklet_struct	tasklet;
-	spinlock_t	lock; /* spinlock to be interrupt safe */
-	struct work_struct timeout_work;
-	struct net_device *netdev;
-	struct device *dev;
-	struct ks8842_tx_dma_ctl	dma_tx;
-	struct ks8842_rx_dma_ctl	dma_rx;
-};
-
-static void ks8842_dma_rx_cb(void *data);
-static void ks8842_dma_tx_cb(void *data);
-
-static inline void ks8842_resume_dma(struct ks8842_adapter *adapter)
-{
-	iowrite32(1, adapter->hw_addr + REQ_TIMB_DMA_RESUME);
-}
-
-static inline void ks8842_select_bank(struct ks8842_adapter *adapter, u16 bank)
-{
-	iowrite16(bank, adapter->hw_addr + REG_SELECT_BANK);
-}
-
-static inline void ks8842_write8(struct ks8842_adapter *adapter, u16 bank,
-	u8 value, int offset)
-{
-	ks8842_select_bank(adapter, bank);
-	iowrite8(value, adapter->hw_addr + offset);
-}
-
-static inline void ks8842_write16(struct ks8842_adapter *adapter, u16 bank,
-	u16 value, int offset)
-{
-	ks8842_select_bank(adapter, bank);
-	iowrite16(value, adapter->hw_addr + offset);
-}
-
-static inline void ks8842_enable_bits(struct ks8842_adapter *adapter, u16 bank,
-	u16 bits, int offset)
-{
-	u16 reg;
-	ks8842_select_bank(adapter, bank);
-	reg = ioread16(adapter->hw_addr + offset);
-	reg |= bits;
-	iowrite16(reg, adapter->hw_addr + offset);
-}
-
-static inline void ks8842_clear_bits(struct ks8842_adapter *adapter, u16 bank,
-	u16 bits, int offset)
-{
-	u16 reg;
-	ks8842_select_bank(adapter, bank);
-	reg = ioread16(adapter->hw_addr + offset);
-	reg &= ~bits;
-	iowrite16(reg, adapter->hw_addr + offset);
-}
-
-static inline void ks8842_write32(struct ks8842_adapter *adapter, u16 bank,
-	u32 value, int offset)
-{
-	ks8842_select_bank(adapter, bank);
-	iowrite32(value, adapter->hw_addr + offset);
-}
-
-static inline u8 ks8842_read8(struct ks8842_adapter *adapter, u16 bank,
-	int offset)
-{
-	ks8842_select_bank(adapter, bank);
-	return ioread8(adapter->hw_addr + offset);
-}
-
-static inline u16 ks8842_read16(struct ks8842_adapter *adapter, u16 bank,
-	int offset)
-{
-	ks8842_select_bank(adapter, bank);
-	return ioread16(adapter->hw_addr + offset);
-}
-
-static inline u32 ks8842_read32(struct ks8842_adapter *adapter, u16 bank,
-	int offset)
-{
-	ks8842_select_bank(adapter, bank);
-	return ioread32(adapter->hw_addr + offset);
-}
-
-static void ks8842_reset(struct ks8842_adapter *adapter)
-{
-	if (adapter->conf_flags & MICREL_KS884X) {
-		ks8842_write16(adapter, 3, 1, REG_GRR);
-		msleep(10);
-		iowrite16(0, adapter->hw_addr + REG_GRR);
-	} else {
-		/* The KS8842 goes haywire when doing softare reset
-		* a work around in the timberdale IP is implemented to
-		* do a hardware reset instead
-		ks8842_write16(adapter, 3, 1, REG_GRR);
-		msleep(10);
-		iowrite16(0, adapter->hw_addr + REG_GRR);
-		*/
-		iowrite32(0x1, adapter->hw_addr + REG_TIMB_RST);
-		msleep(20);
-	}
-}
-
-static void ks8842_update_link_status(struct net_device *netdev,
-	struct ks8842_adapter *adapter)
-{
-	/* check the status of the link */
-	if (ks8842_read16(adapter, 45, REG_P1MBSR) & 0x4) {
-		netif_carrier_on(netdev);
-		netif_wake_queue(netdev);
-	} else {
-		netif_stop_queue(netdev);
-		netif_carrier_off(netdev);
-	}
-}
-
-static void ks8842_enable_tx(struct ks8842_adapter *adapter)
-{
-	ks8842_enable_bits(adapter, 16, 0x01, REG_TXCR);
-}
-
-static void ks8842_disable_tx(struct ks8842_adapter *adapter)
-{
-	ks8842_clear_bits(adapter, 16, 0x01, REG_TXCR);
-}
-
-static void ks8842_enable_rx(struct ks8842_adapter *adapter)
-{
-	ks8842_enable_bits(adapter, 16, 0x01, REG_RXCR);
-}
-
-static void ks8842_disable_rx(struct ks8842_adapter *adapter)
-{
-	ks8842_clear_bits(adapter, 16, 0x01, REG_RXCR);
-}
-
-static void ks8842_reset_hw(struct ks8842_adapter *adapter)
-{
-	/* reset the HW */
-	ks8842_reset(adapter);
-
-	/* Enable QMU Transmit flow control / transmit padding / Transmit CRC */
-	ks8842_write16(adapter, 16, 0x000E, REG_TXCR);
-
-	/* enable the receiver, uni + multi + broadcast + flow ctrl
-		+ crc strip */
-	ks8842_write16(adapter, 16, 0x8 | 0x20 | 0x40 | 0x80 | 0x400,
-		REG_RXCR);
-
-	/* TX frame pointer autoincrement */
-	ks8842_write16(adapter, 17, 0x4000, REG_TXFDPR);
-
-	/* RX frame pointer autoincrement */
-	ks8842_write16(adapter, 17, 0x4000, REG_RXFDPR);
-
-	/* RX 2 kb high watermark */
-	ks8842_write16(adapter, 0, 0x1000, REG_QRFCR);
-
-	/* aggressive back off in half duplex */
-	ks8842_enable_bits(adapter, 32, 1 << 8, REG_SGCR1);
-
-	/* enable no excessive collison drop */
-	ks8842_enable_bits(adapter, 32, 1 << 3, REG_SGCR2);
-
-	/* Enable port 1 force flow control / back pressure / transmit / recv */
-	ks8842_write16(adapter, 48, 0x1E07, REG_P1CR2);
-
-	/* restart port auto-negotiation */
-	ks8842_enable_bits(adapter, 49, 1 << 13, REG_P1CR4);
-
-	/* Enable the transmitter */
-	ks8842_enable_tx(adapter);
-
-	/* Enable the receiver */
-	ks8842_enable_rx(adapter);
-
-	/* clear all interrupts */
-	ks8842_write16(adapter, 18, 0xffff, REG_ISR);
-
-	/* enable interrupts */
-	if (KS8842_USE_DMA(adapter)) {
-		/* When running in DMA Mode the RX interrupt is not enabled in
-		   timberdale because RX data is received by DMA callbacks
-		   it must still be enabled in the KS8842 because it indicates
-		   to timberdale when there is RX data for it's DMA FIFOs */
-		iowrite16(ENABLED_IRQS_DMA_IP, adapter->hw_addr + REG_TIMB_IER);
-		ks8842_write16(adapter, 18, ENABLED_IRQS_DMA, REG_IER);
-	} else {
-		if (!(adapter->conf_flags & MICREL_KS884X))
-			iowrite16(ENABLED_IRQS,
-				adapter->hw_addr + REG_TIMB_IER);
-		ks8842_write16(adapter, 18, ENABLED_IRQS, REG_IER);
-	}
-	/* enable the switch */
-	ks8842_write16(adapter, 32, 0x1, REG_SW_ID_AND_ENABLE);
-}
-
-static void ks8842_read_mac_addr(struct ks8842_adapter *adapter, u8 *dest)
-{
-	int i;
-	u16 mac;
-
-	for (i = 0; i < ETH_ALEN; i++)
-		dest[ETH_ALEN - i - 1] = ks8842_read8(adapter, 2, REG_MARL + i);
-
-	if (adapter->conf_flags & MICREL_KS884X) {
-		/*
-		the sequence of saving mac addr between MAC and Switch is
-		different.
-		*/
-
-		mac = ks8842_read16(adapter, 2, REG_MARL);
-		ks8842_write16(adapter, 39, mac, REG_MACAR3);
-		mac = ks8842_read16(adapter, 2, REG_MARM);
-		ks8842_write16(adapter, 39, mac, REG_MACAR2);
-		mac = ks8842_read16(adapter, 2, REG_MARH);
-		ks8842_write16(adapter, 39, mac, REG_MACAR1);
-	} else {
-
-		/* make sure the switch port uses the same MAC as the QMU */
-		mac = ks8842_read16(adapter, 2, REG_MARL);
-		ks8842_write16(adapter, 39, mac, REG_MACAR1);
-		mac = ks8842_read16(adapter, 2, REG_MARM);
-		ks8842_write16(adapter, 39, mac, REG_MACAR2);
-		mac = ks8842_read16(adapter, 2, REG_MARH);
-		ks8842_write16(adapter, 39, mac, REG_MACAR3);
-	}
-}
-
-static void ks8842_write_mac_addr(struct ks8842_adapter *adapter, u8 *mac)
-{
-	unsigned long flags;
-	unsigned i;
-
-	spin_lock_irqsave(&adapter->lock, flags);
-	for (i = 0; i < ETH_ALEN; i++) {
-		ks8842_write8(adapter, 2, mac[ETH_ALEN - i - 1], REG_MARL + i);
-		if (!(adapter->conf_flags & MICREL_KS884X))
-			ks8842_write8(adapter, 39, mac[ETH_ALEN - i - 1],
-				REG_MACAR1 + i);
-	}
-
-	if (adapter->conf_flags & MICREL_KS884X) {
-		/*
-		the sequence of saving mac addr between MAC and Switch is
-		different.
-		*/
-
-		u16 mac;
-
-		mac = ks8842_read16(adapter, 2, REG_MARL);
-		ks8842_write16(adapter, 39, mac, REG_MACAR3);
-		mac = ks8842_read16(adapter, 2, REG_MARM);
-		ks8842_write16(adapter, 39, mac, REG_MACAR2);
-		mac = ks8842_read16(adapter, 2, REG_MARH);
-		ks8842_write16(adapter, 39, mac, REG_MACAR1);
-	}
-	spin_unlock_irqrestore(&adapter->lock, flags);
-}
-
-static inline u16 ks8842_tx_fifo_space(struct ks8842_adapter *adapter)
-{
-	return ks8842_read16(adapter, 16, REG_TXMIR) & 0x1fff;
-}
-
-static int ks8842_tx_frame_dma(struct sk_buff *skb, struct net_device *netdev)
-{
-	struct ks8842_adapter *adapter = netdev_priv(netdev);
-	struct ks8842_tx_dma_ctl *ctl = &adapter->dma_tx;
-	u8 *buf = ctl->buf;
-
-	if (ctl->adesc) {
-		netdev_dbg(netdev, "%s: TX ongoing\n", __func__);
-		/* transfer ongoing */
-		return NETDEV_TX_BUSY;
-	}
-
-	sg_dma_len(&ctl->sg) = skb->len + sizeof(u32);
-
-	/* copy data to the TX buffer */
-	/* the control word, enable IRQ, port 1 and the length */
-	*buf++ = 0x00;
-	*buf++ = 0x01; /* Port 1 */
-	*buf++ = skb->len & 0xff;
-	*buf++ = (skb->len >> 8) & 0xff;
-	skb_copy_from_linear_data(skb, buf, skb->len);
-
-	dma_sync_single_range_for_device(adapter->dev,
-		sg_dma_address(&ctl->sg), 0, sg_dma_len(&ctl->sg),
-		DMA_TO_DEVICE);
-
-	/* make sure the length is a multiple of 4 */
-	if (sg_dma_len(&ctl->sg) % 4)
-		sg_dma_len(&ctl->sg) += 4 - sg_dma_len(&ctl->sg) % 4;
-
-	ctl->adesc = ctl->chan->device->device_prep_slave_sg(ctl->chan,
-		&ctl->sg, 1, DMA_TO_DEVICE,
-		DMA_PREP_INTERRUPT | DMA_COMPL_SKIP_SRC_UNMAP);
-	if (!ctl->adesc)
-		return NETDEV_TX_BUSY;
-
-	ctl->adesc->callback_param = netdev;
-	ctl->adesc->callback = ks8842_dma_tx_cb;
-	ctl->adesc->tx_submit(ctl->adesc);
-
-	netdev->stats.tx_bytes += skb->len;
-
-	dev_kfree_skb(skb);
-
-	return NETDEV_TX_OK;
-}
-
-static int ks8842_tx_frame(struct sk_buff *skb, struct net_device *netdev)
-{
-	struct ks8842_adapter *adapter = netdev_priv(netdev);
-	int len = skb->len;
-
-	netdev_dbg(netdev, "%s: len %u head %p data %p tail %p end %p\n",
-		__func__, skb->len, skb->head, skb->data,
-		skb_tail_pointer(skb), skb_end_pointer(skb));
-
-	/* check FIFO buffer space, we need space for CRC and command bits */
-	if (ks8842_tx_fifo_space(adapter) < len + 8)
-		return NETDEV_TX_BUSY;
-
-	if (adapter->conf_flags & KS884X_16BIT) {
-		u16 *ptr16 = (u16 *)skb->data;
-		ks8842_write16(adapter, 17, 0x8000 | 0x100, REG_QMU_DATA_LO);
-		ks8842_write16(adapter, 17, (u16)len, REG_QMU_DATA_HI);
-		netdev->stats.tx_bytes += len;
-
-		/* copy buffer */
-		while (len > 0) {
-			iowrite16(*ptr16++, adapter->hw_addr + REG_QMU_DATA_LO);
-			iowrite16(*ptr16++, adapter->hw_addr + REG_QMU_DATA_HI);
-			len -= sizeof(u32);
-		}
-	} else {
-
-		u32 *ptr = (u32 *)skb->data;
-		u32 ctrl;
-		/* the control word, enable IRQ, port 1 and the length */
-		ctrl = 0x8000 | 0x100 | (len << 16);
-		ks8842_write32(adapter, 17, ctrl, REG_QMU_DATA_LO);
-
-		netdev->stats.tx_bytes += len;
-
-		/* copy buffer */
-		while (len > 0) {
-			iowrite32(*ptr, adapter->hw_addr + REG_QMU_DATA_LO);
-			len -= sizeof(u32);
-			ptr++;
-		}
-	}
-
-	/* enqueue packet */
-	ks8842_write16(adapter, 17, 1, REG_TXQCR);
-
-	dev_kfree_skb(skb);
-
-	return NETDEV_TX_OK;
-}
-
-static void ks8842_update_rx_err_counters(struct net_device *netdev, u32 status)
-{
-	netdev_dbg(netdev, "RX error, status: %x\n", status);
-
-	netdev->stats.rx_errors++;
-	if (status & RXSR_TOO_LONG)
-		netdev->stats.rx_length_errors++;
-	if (status & RXSR_CRC_ERROR)
-		netdev->stats.rx_crc_errors++;
-	if (status & RXSR_RUNT)
-		netdev->stats.rx_frame_errors++;
-}
-
-static void ks8842_update_rx_counters(struct net_device *netdev, u32 status,
-	int len)
-{
-	netdev_dbg(netdev, "RX packet, len: %d\n", len);
-
-	netdev->stats.rx_packets++;
-	netdev->stats.rx_bytes += len;
-	if (status & RXSR_MULTICAST)
-		netdev->stats.multicast++;
-}
-
-static int __ks8842_start_new_rx_dma(struct net_device *netdev)
-{
-	struct ks8842_adapter *adapter = netdev_priv(netdev);
-	struct ks8842_rx_dma_ctl *ctl = &adapter->dma_rx;
-	struct scatterlist *sg = &ctl->sg;
-	int err;
-
-	ctl->skb = netdev_alloc_skb(netdev, DMA_BUFFER_SIZE);
-	if (ctl->skb) {
-		sg_init_table(sg, 1);
-		sg_dma_address(sg) = dma_map_single(adapter->dev,
-			ctl->skb->data, DMA_BUFFER_SIZE, DMA_FROM_DEVICE);
-		err = dma_mapping_error(adapter->dev, sg_dma_address(sg));
-		if (unlikely(err)) {
-			sg_dma_address(sg) = 0;
-			goto out;
-		}
-
-		sg_dma_len(sg) = DMA_BUFFER_SIZE;
-
-		ctl->adesc = ctl->chan->device->device_prep_slave_sg(ctl->chan,
-			sg, 1, DMA_FROM_DEVICE,
-			DMA_PREP_INTERRUPT | DMA_COMPL_SKIP_SRC_UNMAP);
-
-		if (!ctl->adesc)
-			goto out;
-
-		ctl->adesc->callback_param = netdev;
-		ctl->adesc->callback = ks8842_dma_rx_cb;
-		ctl->adesc->tx_submit(ctl->adesc);
-	} else {
-		err = -ENOMEM;
-		sg_dma_address(sg) = 0;
-		goto out;
-	}
-
-	return err;
-out:
-	if (sg_dma_address(sg))
-		dma_unmap_single(adapter->dev, sg_dma_address(sg),
-			DMA_BUFFER_SIZE, DMA_FROM_DEVICE);
-	sg_dma_address(sg) = 0;
-	if (ctl->skb)
-		dev_kfree_skb(ctl->skb);
-
-	ctl->skb = NULL;
-
-	printk(KERN_ERR DRV_NAME": Failed to start RX DMA: %d\n", err);
-	return err;
-}
-
-static void ks8842_rx_frame_dma_tasklet(unsigned long arg)
-{
-	struct net_device *netdev = (struct net_device *)arg;
-	struct ks8842_adapter *adapter = netdev_priv(netdev);
-	struct ks8842_rx_dma_ctl *ctl = &adapter->dma_rx;
-	struct sk_buff *skb = ctl->skb;
-	dma_addr_t addr = sg_dma_address(&ctl->sg);
-	u32 status;
-
-	ctl->adesc = NULL;
-
-	/* kick next transfer going */
-	__ks8842_start_new_rx_dma(netdev);
-
-	/* now handle the data we got */
-	dma_unmap_single(adapter->dev, addr, DMA_BUFFER_SIZE, DMA_FROM_DEVICE);
-
-	status = *((u32 *)skb->data);
-
-	netdev_dbg(netdev, "%s - rx_data: status: %x\n",
-		__func__, status & 0xffff);
-
-	/* check the status */
-	if ((status & RXSR_VALID) && !(status & RXSR_ERROR)) {
-		int len = (status >> 16) & 0x7ff;
-
-		ks8842_update_rx_counters(netdev, status, len);
-
-		/* reserve 4 bytes which is the status word */
-		skb_reserve(skb, 4);
-		skb_put(skb, len);
-
-		skb->protocol = eth_type_trans(skb, netdev);
-		netif_rx(skb);
-	} else {
-		ks8842_update_rx_err_counters(netdev, status);
-		dev_kfree_skb(skb);
-	}
-}
-
-static void ks8842_rx_frame(struct net_device *netdev,
-	struct ks8842_adapter *adapter)
-{
-	u32 status;
-	int len;
-
-	if (adapter->conf_flags & KS884X_16BIT) {
-		status = ks8842_read16(adapter, 17, REG_QMU_DATA_LO);
-		len = ks8842_read16(adapter, 17, REG_QMU_DATA_HI);
-		netdev_dbg(netdev, "%s - rx_data: status: %x\n",
-			   __func__, status);
-	} else {
-		status = ks8842_read32(adapter, 17, REG_QMU_DATA_LO);
-		len = (status >> 16) & 0x7ff;
-		status &= 0xffff;
-		netdev_dbg(netdev, "%s - rx_data: status: %x\n",
-			   __func__, status);
-	}
-
-	/* check the status */
-	if ((status & RXSR_VALID) && !(status & RXSR_ERROR)) {
-		struct sk_buff *skb = netdev_alloc_skb_ip_align(netdev, len + 3);
-
-		if (skb) {
-
-			ks8842_update_rx_counters(netdev, status, len);
-
-			if (adapter->conf_flags & KS884X_16BIT) {
-				u16 *data16 = (u16 *)skb_put(skb, len);
-				ks8842_select_bank(adapter, 17);
-				while (len > 0) {
-					*data16++ = ioread16(adapter->hw_addr +
-						REG_QMU_DATA_LO);
-					*data16++ = ioread16(adapter->hw_addr +
-						REG_QMU_DATA_HI);
-					len -= sizeof(u32);
-				}
-			} else {
-				u32 *data = (u32 *)skb_put(skb, len);
-
-				ks8842_select_bank(adapter, 17);
-				while (len > 0) {
-					*data++ = ioread32(adapter->hw_addr +
-						REG_QMU_DATA_LO);
-					len -= sizeof(u32);
-				}
-			}
-			skb->protocol = eth_type_trans(skb, netdev);
-			netif_rx(skb);
-		} else
-			netdev->stats.rx_dropped++;
-	} else
-		ks8842_update_rx_err_counters(netdev, status);
-
-	/* set high watermark to 3K */
-	ks8842_clear_bits(adapter, 0, 1 << 12, REG_QRFCR);
-
-	/* release the frame */
-	ks8842_write16(adapter, 17, 0x01, REG_RXQCR);
-
-	/* set high watermark to 2K */
-	ks8842_enable_bits(adapter, 0, 1 << 12, REG_QRFCR);
-}
-
-void ks8842_handle_rx(struct net_device *netdev, struct ks8842_adapter *adapter)
-{
-	u16 rx_data = ks8842_read16(adapter, 16, REG_RXMIR) & 0x1fff;
-	netdev_dbg(netdev, "%s Entry - rx_data: %d\n", __func__, rx_data);
-	while (rx_data) {
-		ks8842_rx_frame(netdev, adapter);
-		rx_data = ks8842_read16(adapter, 16, REG_RXMIR) & 0x1fff;
-	}
-}
-
-void ks8842_handle_tx(struct net_device *netdev, struct ks8842_adapter *adapter)
-{
-	u16 sr = ks8842_read16(adapter, 16, REG_TXSR);
-	netdev_dbg(netdev, "%s - entry, sr: %x\n", __func__, sr);
-	netdev->stats.tx_packets++;
-	if (netif_queue_stopped(netdev))
-		netif_wake_queue(netdev);
-}
-
-void ks8842_handle_rx_overrun(struct net_device *netdev,
-	struct ks8842_adapter *adapter)
-{
-	netdev_dbg(netdev, "%s: entry\n", __func__);
-	netdev->stats.rx_errors++;
-	netdev->stats.rx_fifo_errors++;
-}
-
-void ks8842_tasklet(unsigned long arg)
-{
-	struct net_device *netdev = (struct net_device *)arg;
-	struct ks8842_adapter *adapter = netdev_priv(netdev);
-	u16 isr;
-	unsigned long flags;
-	u16 entry_bank;
-
-	/* read current bank to be able to set it back */
-	spin_lock_irqsave(&adapter->lock, flags);
-	entry_bank = ioread16(adapter->hw_addr + REG_SELECT_BANK);
-	spin_unlock_irqrestore(&adapter->lock, flags);
-
-	isr = ks8842_read16(adapter, 18, REG_ISR);
-	netdev_dbg(netdev, "%s - ISR: 0x%x\n", __func__, isr);
-
-	/* when running in DMA mode, do not ack RX interrupts, it is handled
-	   internally by timberdale, otherwise it's DMA FIFO:s would stop
-	*/
-	if (KS8842_USE_DMA(adapter))
-		isr &= ~IRQ_RX;
-
-	/* Ack */
-	ks8842_write16(adapter, 18, isr, REG_ISR);
-
-	if (!(adapter->conf_flags & MICREL_KS884X))
-		/* Ack in the timberdale IP as well */
-		iowrite32(0x1, adapter->hw_addr + REG_TIMB_IAR);
-
-	if (!netif_running(netdev))
-		return;
-
-	if (isr & IRQ_LINK_CHANGE)
-		ks8842_update_link_status(netdev, adapter);
-
-	/* should not get IRQ_RX when running DMA mode */
-	if (isr & (IRQ_RX | IRQ_RX_ERROR) && !KS8842_USE_DMA(adapter))
-		ks8842_handle_rx(netdev, adapter);
-
-	/* should only happen when in PIO mode */
-	if (isr & IRQ_TX)
-		ks8842_handle_tx(netdev, adapter);
-
-	if (isr & IRQ_RX_OVERRUN)
-		ks8842_handle_rx_overrun(netdev, adapter);
-
-	if (isr & IRQ_TX_STOPPED) {
-		ks8842_disable_tx(adapter);
-		ks8842_enable_tx(adapter);
-	}
-
-	if (isr & IRQ_RX_STOPPED) {
-		ks8842_disable_rx(adapter);
-		ks8842_enable_rx(adapter);
-	}
-
-	/* re-enable interrupts, put back the bank selection register */
-	spin_lock_irqsave(&adapter->lock, flags);
-	if (KS8842_USE_DMA(adapter))
-		ks8842_write16(adapter, 18, ENABLED_IRQS_DMA, REG_IER);
-	else
-		ks8842_write16(adapter, 18, ENABLED_IRQS, REG_IER);
-	iowrite16(entry_bank, adapter->hw_addr + REG_SELECT_BANK);
-
-	/* Make sure timberdale continues DMA operations, they are stopped while
-	   we are handling the ks8842 because we might change bank */
-	if (KS8842_USE_DMA(adapter))
-		ks8842_resume_dma(adapter);
-
-	spin_unlock_irqrestore(&adapter->lock, flags);
-}
-
-static irqreturn_t ks8842_irq(int irq, void *devid)
-{
-	struct net_device *netdev = devid;
-	struct ks8842_adapter *adapter = netdev_priv(netdev);
-	u16 isr;
-	u16 entry_bank = ioread16(adapter->hw_addr + REG_SELECT_BANK);
-	irqreturn_t ret = IRQ_NONE;
-
-	isr = ks8842_read16(adapter, 18, REG_ISR);
-	netdev_dbg(netdev, "%s - ISR: 0x%x\n", __func__, isr);
-
-	if (isr) {
-		if (KS8842_USE_DMA(adapter))
-			/* disable all but RX IRQ, since the FPGA relies on it*/
-			ks8842_write16(adapter, 18, IRQ_RX, REG_IER);
-		else
-			/* disable IRQ */
-			ks8842_write16(adapter, 18, 0x00, REG_IER);
-
-		/* schedule tasklet */
-		tasklet_schedule(&adapter->tasklet);
-
-		ret = IRQ_HANDLED;
-	}
-
-	iowrite16(entry_bank, adapter->hw_addr + REG_SELECT_BANK);
-
-	/* After an interrupt, tell timberdale to continue DMA operations.
-	   DMA is disabled while we are handling the ks8842 because we might
-	   change bank */
-	ks8842_resume_dma(adapter);
-
-	return ret;
-}
-
-static void ks8842_dma_rx_cb(void *data)
-{
-	struct net_device	*netdev = data;
-	struct ks8842_adapter	*adapter = netdev_priv(netdev);
-
-	netdev_dbg(netdev, "RX DMA finished\n");
-	/* schedule tasklet */
-	if (adapter->dma_rx.adesc)
-		tasklet_schedule(&adapter->dma_rx.tasklet);
-}
-
-static void ks8842_dma_tx_cb(void *data)
-{
-	struct net_device		*netdev = data;
-	struct ks8842_adapter		*adapter = netdev_priv(netdev);
-	struct ks8842_tx_dma_ctl	*ctl = &adapter->dma_tx;
-
-	netdev_dbg(netdev, "TX DMA finished\n");
-
-	if (!ctl->adesc)
-		return;
-
-	netdev->stats.tx_packets++;
-	ctl->adesc = NULL;
-
-	if (netif_queue_stopped(netdev))
-		netif_wake_queue(netdev);
-}
-
-static void ks8842_stop_dma(struct ks8842_adapter *adapter)
-{
-	struct ks8842_tx_dma_ctl *tx_ctl = &adapter->dma_tx;
-	struct ks8842_rx_dma_ctl *rx_ctl = &adapter->dma_rx;
-
-	tx_ctl->adesc = NULL;
-	if (tx_ctl->chan)
-		tx_ctl->chan->device->device_control(tx_ctl->chan,
-			DMA_TERMINATE_ALL, 0);
-
-	rx_ctl->adesc = NULL;
-	if (rx_ctl->chan)
-		rx_ctl->chan->device->device_control(rx_ctl->chan,
-			DMA_TERMINATE_ALL, 0);
-
-	if (sg_dma_address(&rx_ctl->sg))
-		dma_unmap_single(adapter->dev, sg_dma_address(&rx_ctl->sg),
-			DMA_BUFFER_SIZE, DMA_FROM_DEVICE);
-	sg_dma_address(&rx_ctl->sg) = 0;
-
-	dev_kfree_skb(rx_ctl->skb);
-	rx_ctl->skb = NULL;
-}
-
-static void ks8842_dealloc_dma_bufs(struct ks8842_adapter *adapter)
-{
-	struct ks8842_tx_dma_ctl *tx_ctl = &adapter->dma_tx;
-	struct ks8842_rx_dma_ctl *rx_ctl = &adapter->dma_rx;
-
-	ks8842_stop_dma(adapter);
-
-	if (tx_ctl->chan)
-		dma_release_channel(tx_ctl->chan);
-	tx_ctl->chan = NULL;
-
-	if (rx_ctl->chan)
-		dma_release_channel(rx_ctl->chan);
-	rx_ctl->chan = NULL;
-
-	tasklet_kill(&rx_ctl->tasklet);
-
-	if (sg_dma_address(&tx_ctl->sg))
-		dma_unmap_single(adapter->dev, sg_dma_address(&tx_ctl->sg),
-			DMA_BUFFER_SIZE, DMA_TO_DEVICE);
-	sg_dma_address(&tx_ctl->sg) = 0;
-
-	kfree(tx_ctl->buf);
-	tx_ctl->buf = NULL;
-}
-
-static bool ks8842_dma_filter_fn(struct dma_chan *chan, void *filter_param)
-{
-	return chan->chan_id == (long)filter_param;
-}
-
-static int ks8842_alloc_dma_bufs(struct net_device *netdev)
-{
-	struct ks8842_adapter *adapter = netdev_priv(netdev);
-	struct ks8842_tx_dma_ctl *tx_ctl = &adapter->dma_tx;
-	struct ks8842_rx_dma_ctl *rx_ctl = &adapter->dma_rx;
-	int err;
-
-	dma_cap_mask_t mask;
-
-	dma_cap_zero(mask);
-	dma_cap_set(DMA_SLAVE, mask);
-	dma_cap_set(DMA_PRIVATE, mask);
-
-	sg_init_table(&tx_ctl->sg, 1);
-
-	tx_ctl->chan = dma_request_channel(mask, ks8842_dma_filter_fn,
-					   (void *)(long)tx_ctl->channel);
-	if (!tx_ctl->chan) {
-		err = -ENODEV;
-		goto err;
-	}
-
-	/* allocate DMA buffer */
-	tx_ctl->buf = kmalloc(DMA_BUFFER_SIZE, GFP_KERNEL);
-	if (!tx_ctl->buf) {
-		err = -ENOMEM;
-		goto err;
-	}
-
-	sg_dma_address(&tx_ctl->sg) = dma_map_single(adapter->dev,
-		tx_ctl->buf, DMA_BUFFER_SIZE, DMA_TO_DEVICE);
-	err = dma_mapping_error(adapter->dev,
-		sg_dma_address(&tx_ctl->sg));
-	if (err) {
-		sg_dma_address(&tx_ctl->sg) = 0;
-		goto err;
-	}
-
-	rx_ctl->chan = dma_request_channel(mask, ks8842_dma_filter_fn,
-					   (void *)(long)rx_ctl->channel);
-	if (!rx_ctl->chan) {
-		err = -ENODEV;
-		goto err;
-	}
-
-	tasklet_init(&rx_ctl->tasklet, ks8842_rx_frame_dma_tasklet,
-		(unsigned long)netdev);
-
-	return 0;
-err:
-	ks8842_dealloc_dma_bufs(adapter);
-	return err;
-}
-
-/* Netdevice operations */
-
-static int ks8842_open(struct net_device *netdev)
-{
-	struct ks8842_adapter *adapter = netdev_priv(netdev);
-	int err;
-
-	netdev_dbg(netdev, "%s - entry\n", __func__);
-
-	if (KS8842_USE_DMA(adapter)) {
-		err = ks8842_alloc_dma_bufs(netdev);
-
-		if (!err) {
-			/* start RX dma */
-			err = __ks8842_start_new_rx_dma(netdev);
-			if (err)
-				ks8842_dealloc_dma_bufs(adapter);
-		}
-
-		if (err) {
-			printk(KERN_WARNING DRV_NAME
-				": Failed to initiate DMA, running PIO\n");
-			ks8842_dealloc_dma_bufs(adapter);
-			adapter->dma_rx.channel = -1;
-			adapter->dma_tx.channel = -1;
-		}
-	}
-
-	/* reset the HW */
-	ks8842_reset_hw(adapter);
-
-	ks8842_write_mac_addr(adapter, netdev->dev_addr);
-
-	ks8842_update_link_status(netdev, adapter);
-
-	err = request_irq(adapter->irq, ks8842_irq, IRQF_SHARED, DRV_NAME,
-		netdev);
-	if (err) {
-		pr_err("Failed to request IRQ: %d: %d\n", adapter->irq, err);
-		return err;
-	}
-
-	return 0;
-}
-
-static int ks8842_close(struct net_device *netdev)
-{
-	struct ks8842_adapter *adapter = netdev_priv(netdev);
-
-	netdev_dbg(netdev, "%s - entry\n", __func__);
-
-	cancel_work_sync(&adapter->timeout_work);
-
-	if (KS8842_USE_DMA(adapter))
-		ks8842_dealloc_dma_bufs(adapter);
-
-	/* free the irq */
-	free_irq(adapter->irq, netdev);
-
-	/* disable the switch */
-	ks8842_write16(adapter, 32, 0x0, REG_SW_ID_AND_ENABLE);
-
-	return 0;
-}
-
-static netdev_tx_t ks8842_xmit_frame(struct sk_buff *skb,
-				     struct net_device *netdev)
-{
-	int ret;
-	struct ks8842_adapter *adapter = netdev_priv(netdev);
-
-	netdev_dbg(netdev, "%s: entry\n", __func__);
-
-	if (KS8842_USE_DMA(adapter)) {
-		unsigned long flags;
-		ret = ks8842_tx_frame_dma(skb, netdev);
-		/* for now only allow one transfer at the time */
-		spin_lock_irqsave(&adapter->lock, flags);
-		if (adapter->dma_tx.adesc)
-			netif_stop_queue(netdev);
-		spin_unlock_irqrestore(&adapter->lock, flags);
-		return ret;
-	}
-
-	ret = ks8842_tx_frame(skb, netdev);
-
-	if (ks8842_tx_fifo_space(adapter) <  netdev->mtu + 8)
-		netif_stop_queue(netdev);
-
-	return ret;
-}
-
-static int ks8842_set_mac(struct net_device *netdev, void *p)
-{
-	struct ks8842_adapter *adapter = netdev_priv(netdev);
-	struct sockaddr *addr = p;
-	char *mac = (u8 *)addr->sa_data;
-
-	netdev_dbg(netdev, "%s: entry\n", __func__);
-
-	if (!is_valid_ether_addr(addr->sa_data))
-		return -EADDRNOTAVAIL;
-
-	memcpy(netdev->dev_addr, mac, netdev->addr_len);
-
-	ks8842_write_mac_addr(adapter, mac);
-	return 0;
-}
-
-static void ks8842_tx_timeout_work(struct work_struct *work)
-{
-	struct ks8842_adapter *adapter =
-		container_of(work, struct ks8842_adapter, timeout_work);
-	struct net_device *netdev = adapter->netdev;
-	unsigned long flags;
-
-	netdev_dbg(netdev, "%s: entry\n", __func__);
-
-	spin_lock_irqsave(&adapter->lock, flags);
-
-	if (KS8842_USE_DMA(adapter))
-		ks8842_stop_dma(adapter);
-
-	/* disable interrupts */
-	ks8842_write16(adapter, 18, 0, REG_IER);
-	ks8842_write16(adapter, 18, 0xFFFF, REG_ISR);
-
-	netif_stop_queue(netdev);
-
-	spin_unlock_irqrestore(&adapter->lock, flags);
-
-	ks8842_reset_hw(adapter);
-
-	ks8842_write_mac_addr(adapter, netdev->dev_addr);
-
-	ks8842_update_link_status(netdev, adapter);
-
-	if (KS8842_USE_DMA(adapter))
-		__ks8842_start_new_rx_dma(netdev);
-}
-
-static void ks8842_tx_timeout(struct net_device *netdev)
-{
-	struct ks8842_adapter *adapter = netdev_priv(netdev);
-
-	netdev_dbg(netdev, "%s: entry\n", __func__);
-
-	schedule_work(&adapter->timeout_work);
-}
-
-static const struct net_device_ops ks8842_netdev_ops = {
-	.ndo_open		= ks8842_open,
-	.ndo_stop		= ks8842_close,
-	.ndo_start_xmit		= ks8842_xmit_frame,
-	.ndo_set_mac_address	= ks8842_set_mac,
-	.ndo_tx_timeout 	= ks8842_tx_timeout,
-	.ndo_validate_addr	= eth_validate_addr
-};
-
-static const struct ethtool_ops ks8842_ethtool_ops = {
-	.get_link		= ethtool_op_get_link,
-};
-
-static int __devinit ks8842_probe(struct platform_device *pdev)
-{
-	int err = -ENOMEM;
-	struct resource *iomem;
-	struct net_device *netdev;
-	struct ks8842_adapter *adapter;
-	struct ks8842_platform_data *pdata = pdev->dev.platform_data;
-	u16 id;
-	unsigned i;
-
-	iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!request_mem_region(iomem->start, resource_size(iomem), DRV_NAME))
-		goto err_mem_region;
-
-	netdev = alloc_etherdev(sizeof(struct ks8842_adapter));
-	if (!netdev)
-		goto err_alloc_etherdev;
-
-	SET_NETDEV_DEV(netdev, &pdev->dev);
-
-	adapter = netdev_priv(netdev);
-	adapter->netdev = netdev;
-	INIT_WORK(&adapter->timeout_work, ks8842_tx_timeout_work);
-	adapter->hw_addr = ioremap(iomem->start, resource_size(iomem));
-	adapter->conf_flags = iomem->flags;
-
-	if (!adapter->hw_addr)
-		goto err_ioremap;
-
-	adapter->irq = platform_get_irq(pdev, 0);
-	if (adapter->irq < 0) {
-		err = adapter->irq;
-		goto err_get_irq;
-	}
-
-	adapter->dev = (pdev->dev.parent) ? pdev->dev.parent : &pdev->dev;
-
-	/* DMA is only supported when accessed via timberdale */
-	if (!(adapter->conf_flags & MICREL_KS884X) && pdata &&
-		(pdata->tx_dma_channel != -1) &&
-		(pdata->rx_dma_channel != -1)) {
-		adapter->dma_rx.channel = pdata->rx_dma_channel;
-		adapter->dma_tx.channel = pdata->tx_dma_channel;
-	} else {
-		adapter->dma_rx.channel = -1;
-		adapter->dma_tx.channel = -1;
-	}
-
-	tasklet_init(&adapter->tasklet, ks8842_tasklet, (unsigned long)netdev);
-	spin_lock_init(&adapter->lock);
-
-	netdev->netdev_ops = &ks8842_netdev_ops;
-	netdev->ethtool_ops = &ks8842_ethtool_ops;
-
-	/* Check if a mac address was given */
-	i = netdev->addr_len;
-	if (pdata) {
-		for (i = 0; i < netdev->addr_len; i++)
-			if (pdata->macaddr[i] != 0)
-				break;
-
-		if (i < netdev->addr_len)
-			/* an address was passed, use it */
-			memcpy(netdev->dev_addr, pdata->macaddr,
-				netdev->addr_len);
-	}
-
-	if (i == netdev->addr_len) {
-		ks8842_read_mac_addr(adapter, netdev->dev_addr);
-
-		if (!is_valid_ether_addr(netdev->dev_addr))
-			random_ether_addr(netdev->dev_addr);
-	}
-
-	id = ks8842_read16(adapter, 32, REG_SW_ID_AND_ENABLE);
-
-	strcpy(netdev->name, "eth%d");
-	err = register_netdev(netdev);
-	if (err)
-		goto err_register;
-
-	platform_set_drvdata(pdev, netdev);
-
-	pr_info("Found chip, family: 0x%x, id: 0x%x, rev: 0x%x\n",
-		(id >> 8) & 0xff, (id >> 4) & 0xf, (id >> 1) & 0x7);
-
-	return 0;
-
-err_register:
-err_get_irq:
-	iounmap(adapter->hw_addr);
-err_ioremap:
-	free_netdev(netdev);
-err_alloc_etherdev:
-	release_mem_region(iomem->start, resource_size(iomem));
-err_mem_region:
-	return err;
-}
-
-static int __devexit ks8842_remove(struct platform_device *pdev)
-{
-	struct net_device *netdev = platform_get_drvdata(pdev);
-	struct ks8842_adapter *adapter = netdev_priv(netdev);
-	struct resource *iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-
-	unregister_netdev(netdev);
-	tasklet_kill(&adapter->tasklet);
-	iounmap(adapter->hw_addr);
-	free_netdev(netdev);
-	release_mem_region(iomem->start, resource_size(iomem));
-	platform_set_drvdata(pdev, NULL);
-	return 0;
-}
-
-
-static struct platform_driver ks8842_platform_driver = {
-	.driver = {
-		.name	= DRV_NAME,
-		.owner	= THIS_MODULE,
-	},
-	.probe		= ks8842_probe,
-	.remove		= ks8842_remove,
-};
-
-static int __init ks8842_init(void)
-{
-	return platform_driver_register(&ks8842_platform_driver);
-}
-
-static void __exit ks8842_exit(void)
-{
-	platform_driver_unregister(&ks8842_platform_driver);
-}
-
-module_init(ks8842_init);
-module_exit(ks8842_exit);
-
-MODULE_DESCRIPTION("Timberdale KS8842 ethernet driver");
-MODULE_AUTHOR("Mocean Laboratories <info@mocean-labs.com>");
-MODULE_LICENSE("GPL v2");
-MODULE_ALIAS("platform:ks8842");
-