diff options
| author | Ondrej Zary <linux@rainbow-software.org> | 2015-11-15 22:36:11 +0100 |
|---|---|---|
| committer | David S. Miller <davem@davemloft.net> | 2015-11-16 17:11:31 -0500 |
| commit | c3f45d322cbd379c46466cc2ecab7e2d719b22ed (patch) | |
| tree | f8bbc735fb79fbc7306dd4e96098c834aea58c9a /drivers/net/ethernet/dlink/dl2k.h | |
| parent | 41033f029e393a64e81966cbe34d66c6cf8a2e7e (diff) | |
dl2k: Add support for IP1000A-based cards
Add support for IP1000A chips to dl2k driver.
IP1000A chip looks like a TC9020 with integrated PHY.
This allows IP1000A chips to work reliably because the ipg driver is
buggy - it loses packets under load and then completely stops
transmitting data.
Tested with Asus NX1101 v2.0 at 10, 100 and 1000Mbps:
vendor=0x13f0 device=0x1023 (rev 0x41)
subsystem vendor=0x1043 device=0x8180
MAC address registers access needed to be changed from 8-bit to 16-bit
because 8-bit does not work on IP1000A. 8-bit access is not even
allowed in the TC9020 datasheet (although it worked). 16-bit access
works on both.
Tested that it does not break D-Link DGE-550T (DL-2000 chip, probably
a rebranded TC9020):
vendor=0x1186 device=0x4000 (rev 0x0c)
subsystem vendor=0x1186 device=0x4000
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net/ethernet/dlink/dl2k.h')
| -rw-r--r-- | drivers/net/ethernet/dlink/dl2k.h | 15 |
1 files changed, 14 insertions, 1 deletions
diff --git a/drivers/net/ethernet/dlink/dl2k.h b/drivers/net/ethernet/dlink/dl2k.h index 23c07b007069..8f4f61262d5c 100644 --- a/drivers/net/ethernet/dlink/dl2k.h +++ b/drivers/net/ethernet/dlink/dl2k.h @@ -211,6 +211,10 @@ enum ASICCtrl_HiWord_bits { ResetBusy = 0x0400, }; +#define IPG_AC_LED_MODE BIT(14) +#define IPG_AC_LED_SPEED BIT(27) +#define IPG_AC_LED_MODE_BIT_1 BIT(29) + /* Transmit Frame Control bits */ enum TFC_bits { DwordAlign = 0x00000000, @@ -332,7 +336,10 @@ typedef struct t_SROM { u16 asic_ctrl; /* 0x02 */ u16 sub_vendor_id; /* 0x04 */ u16 sub_system_id; /* 0x06 */ - u16 reserved1[12]; /* 0x08-0x1f */ + u16 pci_base_1; /* 0x08 (IP1000A only) */ + u16 pci_base_2; /* 0x0a (IP1000A only) */ + u16 led_mode; /* 0x0c (IP1000A only) */ + u16 reserved1[9]; /* 0x0e-0x1f */ u8 mac_addr[6]; /* 0x20-0x25 */ u8 reserved2[10]; /* 0x26-0x2f */ u8 sib[204]; /* 0x30-0xfb */ @@ -397,6 +404,7 @@ struct netdev_private { u16 advertising; /* NWay media advertisement */ u16 negotiate; /* Negotiated media */ int phy_addr; /* PHY addresses. */ + u16 led_mode; /* LED mode read from EEPROM (IP1000A only) */ }; /* The station address location in the EEPROM. */ @@ -407,10 +415,15 @@ struct netdev_private { class_mask of the class are honored during the comparison. driver_data Data private to the driver. */ +#define CHIP_IP1000A 1 static const struct pci_device_id rio_pci_tbl[] = { {0x1186, 0x4000, PCI_ANY_ID, PCI_ANY_ID, }, {0x13f0, 0x1021, PCI_ANY_ID, PCI_ANY_ID, }, + { PCI_VDEVICE(SUNDANCE, 0x1023), CHIP_IP1000A }, + { PCI_VDEVICE(SUNDANCE, 0x2021), CHIP_IP1000A }, + { PCI_VDEVICE(DLINK, 0x9021), CHIP_IP1000A }, + { PCI_VDEVICE(DLINK, 0x4020), CHIP_IP1000A }, { } }; MODULE_DEVICE_TABLE (pci, rio_pci_tbl); |