diff options
| author | Benedikt Spranger <b.spranger@linutronix.de> | 2019-06-28 18:58:11 +0200 |
|---|---|---|
| committer | David S. Miller <davem@davemloft.net> | 2019-06-28 13:34:13 -0700 |
| commit | 75dad2520fc37345075498e9c5aa1355b4993dbc (patch) | |
| tree | 93702853dcbf3bf37008224885712d5cb9c626a9 /drivers/net/dsa | |
| parent | e7792df831f5d6c183099a9dde224c9f4f763ebe (diff) | |
net: dsa: b53: Disable all ports on setup
A b53 device may configured through an external EEPROM like the switch
device on the Lamobo R1 router board. The configuration of a port may
therefore differ from the reset configuration of the switch.
The switch configuration reported by the DSA subsystem is different until
the port is configured by DSA i.e. a port can be active, while the DSA
subsystem reports the port is inactive. Disable all ports and not only
the unused ones to put all ports into a well defined state.
Signed-off-by: Benedikt Spranger <b.spranger@linutronix.de>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net/dsa')
| -rw-r--r-- | drivers/net/dsa/b53/b53_common.c | 4 |
1 files changed, 2 insertions, 2 deletions
diff --git a/drivers/net/dsa/b53/b53_common.c b/drivers/net/dsa/b53/b53_common.c index c8040ecf4425..907af62846ba 100644 --- a/drivers/net/dsa/b53/b53_common.c +++ b/drivers/net/dsa/b53/b53_common.c @@ -955,13 +955,13 @@ static int b53_setup(struct dsa_switch *ds) if (ret) dev_err(ds->dev, "failed to apply configuration\n"); - /* Configure IMP/CPU port, disable unused ports. Enabled + /* Configure IMP/CPU port, disable all other ports. Enabled * ports will be configured with .port_enable */ for (port = 0; port < dev->num_ports; port++) { if (dsa_is_cpu_port(ds, port)) b53_enable_cpu_port(dev, port); - else if (dsa_is_unused_port(ds, port)) + else b53_disable_port(ds, port); } |