diff options
author | Jeff Kirsher <jeffrey.t.kirsher@intel.com> | 2011-07-13 15:38:08 -0700 |
---|---|---|
committer | Jeff Kirsher <jeffrey.t.kirsher@intel.com> | 2011-08-10 20:04:12 -0700 |
commit | 115978859272b958366d4a08c99a24f9625fa663 (patch) | |
tree | e3eb08a76c0180bd5efa36985306878cbea5845f /drivers/net/3c505.c | |
parent | ae150435b59e68de00546330241727f2fec54517 (diff) |
i825xx: Move the Intel 82586/82593/82596 based drivers
Move the drivers that use the i82586/i82593/i82596 chipsets into
drivers/net/ethernet/i825xx/ and make the necessary Kconfig and
Makefile changes. There were 4 3Com drivers which were initially
moved into 3com/, which now reside in i825xx since they all used
the i82586 chip.
CC: Philip Blundell <philb@gnu.org>
CC: Russell King <linux@arm.linux.org.uk>
CC: <aris@cathedrallabs.org>
CC: Donald Becker <becker@scyld.com>
CC: Chris Beauregard <cpbeaure@undergrad.math.uwaterloo.ca>
CC: Richard Procter <rnp@paradise.net.nz>
CC: Andries Brouwer <aeb@cwi.nl>
CC: "M.Hipp" <hippm@informatik.uni-tuebingen.de>
CC: Richard Hirst <richard@sleepie.demon.co.uk>
CC: Sam Creasey <sammy@oh.verio.com>
CC: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Diffstat (limited to 'drivers/net/3c505.c')
-rw-r--r-- | drivers/net/3c505.c | 1673 |
1 files changed, 0 insertions, 1673 deletions
diff --git a/drivers/net/3c505.c b/drivers/net/3c505.c deleted file mode 100644 index 88d766ee0e1b..000000000000 --- a/drivers/net/3c505.c +++ /dev/null @@ -1,1673 +0,0 @@ -/* - * Linux Ethernet device driver for the 3Com Etherlink Plus (3C505) - * By Craig Southeren, Juha Laiho and Philip Blundell - * - * 3c505.c This module implements an interface to the 3Com - * Etherlink Plus (3c505) Ethernet card. Linux device - * driver interface reverse engineered from the Linux 3C509 - * device drivers. Some 3C505 information gleaned from - * the Crynwr packet driver. Still this driver would not - * be here without 3C505 technical reference provided by - * 3Com. - * - * $Id: 3c505.c,v 1.10 1996/04/16 13:06:27 phil Exp $ - * - * Authors: Linux 3c505 device driver by - * Craig Southeren, <craigs@ineluki.apana.org.au> - * Final debugging by - * Andrew Tridgell, <tridge@nimbus.anu.edu.au> - * Auto irq/address, tuning, cleanup and v1.1.4+ kernel mods by - * Juha Laiho, <jlaiho@ichaos.nullnet.fi> - * Linux 3C509 driver by - * Donald Becker, <becker@super.org> - * (Now at <becker@scyld.com>) - * Crynwr packet driver by - * Krishnan Gopalan and Gregg Stefancik, - * Clemson University Engineering Computer Operations. - * Portions of the code have been adapted from the 3c505 - * driver for NCSA Telnet by Bruce Orchard and later - * modified by Warren Van Houten and krus@diku.dk. - * 3C505 technical information provided by - * Terry Murphy, of 3Com Network Adapter Division - * Linux 1.3.0 changes by - * Alan Cox <Alan.Cox@linux.org> - * More debugging, DMA support, currently maintained by - * Philip Blundell <philb@gnu.org> - * Multicard/soft configurable dma channel/rev 2 hardware support - * by Christopher Collins <ccollins@pcug.org.au> - * Ethtool support (jgarzik), 11/17/2001 - */ - -#define DRV_NAME "3c505" -#define DRV_VERSION "1.10a" - - -/* Theory of operation: - * - * The 3c505 is quite an intelligent board. All communication with it is done - * by means of Primary Command Blocks (PCBs); these are transferred using PIO - * through the command register. The card has 256k of on-board RAM, which is - * used to buffer received packets. It might seem at first that more buffers - * are better, but in fact this isn't true. From my tests, it seems that - * more than about 10 buffers are unnecessary, and there is a noticeable - * performance hit in having more active on the card. So the majority of the - * card's memory isn't, in fact, used. Sadly, the card only has one transmit - * buffer and, short of loading our own firmware into it (which is what some - * drivers resort to) there's nothing we can do about this. - * - * We keep up to 4 "receive packet" commands active on the board at a time. - * When a packet comes in, so long as there is a receive command active, the - * board will send us a "packet received" PCB and then add the data for that - * packet to the DMA queue. If a DMA transfer is not already in progress, we - * set one up to start uploading the data. We have to maintain a list of - * backlogged receive packets, because the card may decide to tell us about - * a newly-arrived packet at any time, and we may not be able to start a DMA - * transfer immediately (ie one may already be going on). We can't NAK the - * PCB, because then it would throw the packet away. - * - * Trying to send a PCB to the card at the wrong moment seems to have bad - * effects. If we send it a transmit PCB while a receive DMA is happening, - * it will just NAK the PCB and so we will have wasted our time. Worse, it - * sometimes seems to interrupt the transfer. The majority of the low-level - * code is protected by one huge semaphore -- "busy" -- which is set whenever - * it probably isn't safe to do anything to the card. The receive routine - * must gain a lock on "busy" before it can start a DMA transfer, and the - * transmit routine must gain a lock before it sends the first PCB to the card. - * The send_pcb() routine also has an internal semaphore to protect it against - * being re-entered (which would be disastrous) -- this is needed because - * several things can happen asynchronously (re-priming the receiver and - * asking the card for statistics, for example). send_pcb() will also refuse - * to talk to the card at all if a DMA upload is happening. The higher-level - * networking code will reschedule a later retry if some part of the driver - * is blocked. In practice, this doesn't seem to happen very often. - */ - -/* This driver may now work with revision 2.x hardware, since all the read - * operations on the HCR have been removed (we now keep our own softcopy). - * But I don't have an old card to test it on. - * - * This has had the bad effect that the autoprobe routine is now a bit - * less friendly to other devices. However, it was never very good. - * before, so I doubt it will hurt anybody. - */ - -/* The driver is a mess. I took Craig's and Juha's code, and hacked it firstly - * to make it more reliable, and secondly to add DMA mode. Many things could - * probably be done better; the concurrency protection is particularly awful. - */ - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/string.h> -#include <linux/interrupt.h> -#include <linux/errno.h> -#include <linux/in.h> -#include <linux/ioport.h> -#include <linux/spinlock.h> -#include <linux/ethtool.h> -#include <linux/delay.h> -#include <linux/bitops.h> -#include <linux/gfp.h> - -#include <asm/uaccess.h> -#include <asm/io.h> -#include <asm/dma.h> - -#include <linux/netdevice.h> -#include <linux/etherdevice.h> -#include <linux/skbuff.h> -#include <linux/init.h> - -#include "3c505.h" - -/********************************************************* - * - * define debug messages here as common strings to reduce space - * - *********************************************************/ - -#define filename __FILE__ - -#define timeout_msg "*** timeout at %s:%s (line %d) ***\n" -#define TIMEOUT_MSG(lineno) \ - pr_notice(timeout_msg, filename, __func__, (lineno)) - -#define invalid_pcb_msg "*** invalid pcb length %d at %s:%s (line %d) ***\n" -#define INVALID_PCB_MSG(len) \ - pr_notice(invalid_pcb_msg, (len), filename, __func__, __LINE__) - -#define search_msg "%s: Looking for 3c505 adapter at address %#x..." - -#define stilllooking_msg "still looking..." - -#define found_msg "found.\n" - -#define notfound_msg "not found (reason = %d)\n" - -#define couldnot_msg "%s: 3c505 not found\n" - -/********************************************************* - * - * various other debug stuff - * - *********************************************************/ - -#ifdef ELP_DEBUG -static int elp_debug = ELP_DEBUG; -#else -static int elp_debug; -#endif -#define debug elp_debug - -/* - * 0 = no messages (well, some) - * 1 = messages when high level commands performed - * 2 = messages when low level commands performed - * 3 = messages when interrupts received - */ - -/***************************************************************** - * - * List of I/O-addresses we try to auto-sense - * Last element MUST BE 0! - *****************************************************************/ - -static int addr_list[] __initdata = {0x300, 0x280, 0x310, 0}; - -/* Dma Memory related stuff */ - -static unsigned long dma_mem_alloc(int size) -{ - int order = get_order(size); - return __get_dma_pages(GFP_KERNEL, order); -} - - -/***************************************************************** - * - * Functions for I/O (note the inline !) - * - *****************************************************************/ - -static inline unsigned char inb_status(unsigned int base_addr) -{ - return inb(base_addr + PORT_STATUS); -} - -static inline int inb_command(unsigned int base_addr) -{ - return inb(base_addr + PORT_COMMAND); -} - -static inline void outb_control(unsigned char val, struct net_device *dev) -{ - outb(val, dev->base_addr + PORT_CONTROL); - ((elp_device *)(netdev_priv(dev)))->hcr_val = val; -} - -#define HCR_VAL(x) (((elp_device *)(netdev_priv(x)))->hcr_val) - -static inline void outb_command(unsigned char val, unsigned int base_addr) -{ - outb(val, base_addr + PORT_COMMAND); -} - -static inline unsigned int backlog_next(unsigned int n) -{ - return (n + 1) % BACKLOG_SIZE; -} - -/***************************************************************** - * - * useful functions for accessing the adapter - * - *****************************************************************/ - -/* - * use this routine when accessing the ASF bits as they are - * changed asynchronously by the adapter - */ - -/* get adapter PCB status */ -#define GET_ASF(addr) \ - (get_status(addr)&ASF_PCB_MASK) - -static inline int get_status(unsigned int base_addr) -{ - unsigned long timeout = jiffies + 10*HZ/100; - register int stat1; - do { - stat1 = inb_status(base_addr); - } while (stat1 != inb_status(base_addr) && time_before(jiffies, timeout)); - if (time_after_eq(jiffies, timeout)) - TIMEOUT_MSG(__LINE__); - return stat1; -} - -static inline void set_hsf(struct net_device *dev, int hsf) -{ - elp_device *adapter = netdev_priv(dev); - unsigned long flags; - - spin_lock_irqsave(&adapter->lock, flags); - outb_control((HCR_VAL(dev) & ~HSF_PCB_MASK) | hsf, dev); - spin_unlock_irqrestore(&adapter->lock, flags); -} - -static bool start_receive(struct net_device *, pcb_struct *); - -static inline void adapter_reset(struct net_device *dev) -{ - unsigned long timeout; - elp_device *adapter = netdev_priv(dev); - unsigned char orig_hcr = adapter->hcr_val; - - outb_control(0, dev); - - if (inb_status(dev->base_addr) & ACRF) { - do { - inb_command(dev->base_addr); - timeout = jiffies + 2*HZ/100; - while (time_before_eq(jiffies, timeout) && !(inb_status(dev->base_addr) & ACRF)); - } while (inb_status(dev->base_addr) & ACRF); - set_hsf(dev, HSF_PCB_NAK); - } - outb_control(adapter->hcr_val | ATTN | DIR, dev); - mdelay(10); - outb_control(adapter->hcr_val & ~ATTN, dev); - mdelay(10); - outb_control(adapter->hcr_val | FLSH, dev); - mdelay(10); - outb_control(adapter->hcr_val & ~FLSH, dev); - mdelay(10); - - outb_control(orig_hcr, dev); - if (!start_receive(dev, &adapter->tx_pcb)) - pr_err("%s: start receive command failed\n", dev->name); -} - -/* Check to make sure that a DMA transfer hasn't timed out. This should - * never happen in theory, but seems to occur occasionally if the card gets - * prodded at the wrong time. - */ -static inline void check_3c505_dma(struct net_device *dev) -{ - elp_device *adapter = netdev_priv(dev); - if (adapter->dmaing && time_after(jiffies, adapter->current_dma.start_time + 10)) { - unsigned long flags, f; - pr_err("%s: DMA %s timed out, %d bytes left\n", dev->name, - adapter->current_dma.direction ? "download" : "upload", - get_dma_residue(dev->dma)); - spin_lock_irqsave(&adapter->lock, flags); - adapter->dmaing = 0; - adapter->busy = 0; - - f=claim_dma_lock(); - disable_dma(dev->dma); - release_dma_lock(f); - - if (adapter->rx_active) - adapter->rx_active--; - outb_control(adapter->hcr_val & ~(DMAE | TCEN | DIR), dev); - spin_unlock_irqrestore(&adapter->lock, flags); - } -} - -/* Primitive functions used by send_pcb() */ -static inline bool send_pcb_slow(unsigned int base_addr, unsigned char byte) -{ - unsigned long timeout; - outb_command(byte, base_addr); - for (timeout = jiffies + 5*HZ/100; time_before(jiffies, timeout);) { - if (inb_status(base_addr) & HCRE) - return false; - } - pr_warning("3c505: send_pcb_slow timed out\n"); - return true; -} - -static inline bool send_pcb_fast(unsigned int base_addr, unsigned char byte) -{ - unsigned int timeout; - outb_command(byte, base_addr); - for (timeout = 0; timeout < 40000; timeout++) { - if (inb_status(base_addr) & HCRE) - return false; - } - pr_warning("3c505: send_pcb_fast timed out\n"); - return true; -} - -/* Check to see if the receiver needs restarting, and kick it if so */ -static inline void prime_rx(struct net_device *dev) -{ - elp_device *adapter = netdev_priv(dev); - while (adapter->rx_active < ELP_RX_PCBS && netif_running(dev)) { - if (!start_receive(dev, &adapter->itx_pcb)) - break; - } -} - -/***************************************************************** - * - * send_pcb - * Send a PCB to the adapter. - * - * output byte to command reg --<--+ - * wait until HCRE is non zero | - * loop until all bytes sent -->--+ - * set HSF1 and HSF2 to 1 - * output pcb length - * wait until ASF give ACK or NAK - * set HSF1 and HSF2 to 0 - * - *****************************************************************/ - -/* This can be quite slow -- the adapter is allowed to take up to 40ms - * to respond to the initial interrupt. - * - * We run initially with interrupts turned on, but with a semaphore set - * so that nobody tries to re-enter this code. Once the first byte has - * gone through, we turn interrupts off and then send the others (the - * timeout is reduced to 500us). - */ - -static bool send_pcb(struct net_device *dev, pcb_struct * pcb) -{ - int i; - unsigned long timeout; - elp_device *adapter = netdev_priv(dev); - unsigned long flags; - - check_3c505_dma(dev); - - if (adapter->dmaing && adapter->current_dma.direction == 0) - return false; - - /* Avoid contention */ - if (test_and_set_bit(1, &adapter->send_pcb_semaphore)) { - if (elp_debug >= 3) { - pr_debug("%s: send_pcb entered while threaded\n", dev->name); - } - return false; - } - /* - * load each byte into the command register and - * wait for the HCRE bit to indicate the adapter - * had read the byte - */ - set_hsf(dev, 0); - - if (send_pcb_slow(dev->base_addr, pcb->command)) - goto abort; - - spin_lock_irqsave(&adapter->lock, flags); - - if (send_pcb_fast(dev->base_addr, pcb->length)) - goto sti_abort; - - for (i = 0; i < pcb->length; i++) { - if (send_pcb_fast(dev->base_addr, pcb->data.raw[i])) - goto sti_abort; - } - - outb_control(adapter->hcr_val | 3, dev); /* signal end of PCB */ - outb_command(2 + pcb->length, dev->base_addr); - - /* now wait for the acknowledgement */ - spin_unlock_irqrestore(&adapter->lock, flags); - - for (timeout = jiffies + 5*HZ/100; time_before(jiffies, timeout);) { - switch (GET_ASF(dev->base_addr)) { - case ASF_PCB_ACK: - adapter->send_pcb_semaphore = 0; - return true; - - case ASF_PCB_NAK: -#ifdef ELP_DEBUG - pr_debug("%s: send_pcb got NAK\n", dev->name); -#endif - goto abort; - } - } - - if (elp_debug >= 1) - pr_debug("%s: timeout waiting for PCB acknowledge (status %02x)\n", - dev->name, inb_status(dev->base_addr)); - goto abort; - - sti_abort: - spin_unlock_irqrestore(&adapter->lock, flags); - abort: - adapter->send_pcb_semaphore = 0; - return false; -} - - -/***************************************************************** - * - * receive_pcb - * Read a PCB from the adapter - * - * wait for ACRF to be non-zero ---<---+ - * input a byte | - * if ASF1 and ASF2 were not both one | - * before byte was read, loop --->---+ - * set HSF1 and HSF2 for ack - * - *****************************************************************/ - -static bool receive_pcb(struct net_device *dev, pcb_struct * pcb) -{ - int i, j; - int total_length; - int stat; - unsigned long timeout; - unsigned long flags; - - elp_device *adapter = netdev_priv(dev); - - set_hsf(dev, 0); - - /* get the command code */ - timeout = jiffies + 2*HZ/100; - while (((stat = get_status(dev->base_addr)) & ACRF) == 0 && time_before(jiffies, timeout)); - if (time_after_eq(jiffies, timeout)) { - TIMEOUT_MSG(__LINE__); - return false; - } - pcb->command = inb_command(dev->base_addr); - - /* read the data length */ - timeout = jiffies + 3*HZ/100; - while (((stat = get_status(dev->base_addr)) & ACRF) == 0 && time_before(jiffies, timeout)); - if (time_after_eq(jiffies, timeout)) { - TIMEOUT_MSG(__LINE__); - pr_info("%s: status %02x\n", dev->name, stat); - return false; - } - pcb->length = inb_command(dev->base_addr); - - if (pcb->length > MAX_PCB_DATA) { - INVALID_PCB_MSG(pcb->length); - adapter_reset(dev); - return false; - } - /* read the data */ - spin_lock_irqsave(&adapter->lock, flags); - for (i = 0; i < MAX_PCB_DATA; i++) { - for (j = 0; j < 20000; j++) { - stat = get_status(dev->base_addr); - if (stat & ACRF) - break; - } - pcb->data.raw[i] = inb_command(dev->base_addr); - if ((stat & ASF_PCB_MASK) == ASF_PCB_END || j >= 20000) - break; - } - spin_unlock_irqrestore(&adapter->lock, flags); - if (i >= MAX_PCB_DATA) { - INVALID_PCB_MSG(i); - return false; - } - if (j >= 20000) { - TIMEOUT_MSG(__LINE__); - return false; - } - /* the last "data" byte was really the length! */ - total_length = pcb->data.raw[i]; - - /* safety check total length vs data length */ - if (total_length != (pcb->length + 2)) { - if (elp_debug >= 2) - pr_warning("%s: mangled PCB received\n", dev->name); - set_hsf(dev, HSF_PCB_NAK); - return false; - } - - if (pcb->command == CMD_RECEIVE_PACKET_COMPLETE) { - if (test_and_set_bit(0, (void *) &adapter->busy)) { - if (backlog_next(adapter->rx_backlog.in) == adapter->rx_backlog.out) { - set_hsf(dev, HSF_PCB_NAK); - pr_warning("%s: PCB rejected, transfer in progress and backlog full\n", dev->name); - pcb->command = 0; - return true; - } else { - pcb->command = 0xff; - } - } - } - set_hsf(dev, HSF_PCB_ACK); - return true; -} - -/****************************************************** - * - * queue a receive command on the adapter so we will get an - * interrupt when a packet is received. - * - ******************************************************/ - -static bool start_receive(struct net_device *dev, pcb_struct * tx_pcb) -{ - bool status; - elp_device *adapter = netdev_priv(dev); - - if (elp_debug >= 3) - pr_debug("%s: restarting receiver\n", dev->name); - tx_pcb->command = CMD_RECEIVE_PACKET; - tx_pcb->length = sizeof(struct Rcv_pkt); - tx_pcb->data.rcv_pkt.buf_seg - = tx_pcb->data.rcv_pkt.buf_ofs = 0; /* Unused */ - tx_pcb->data.rcv_pkt.buf_len = 1600; - tx_pcb->data.rcv_pkt.timeout = 0; /* set timeout to zero */ - status = send_pcb(dev, tx_pcb); - if (status) - adapter->rx_active++; - return status; -} - -/****************************************************** - * - * extract a packet from the adapter - * this routine is only called from within the interrupt - * service routine, so no cli/sti calls are needed - * note that the length is always assumed to be even - * - ******************************************************/ - -static void receive_packet(struct net_device *dev, int len) -{ - int rlen; - elp_device *adapter = netdev_priv(dev); - void *target; - struct sk_buff *skb; - unsigned long flags; - - rlen = (len + 1) & ~1; - skb = dev_alloc_skb(rlen + 2); - - if (!skb) { - pr_warning("%s: memory squeeze, dropping packet\n", dev->name); - target = adapter->dma_buffer; - adapter->current_dma.target = NULL; - /* FIXME: stats */ - return; - } - - skb_reserve(skb, 2); - target = skb_put(skb, rlen); - if ((unsigned long)(target + rlen) >= MAX_DMA_ADDRESS) { - adapter->current_dma.target = target; - target = adapter->dma_buffer; - } else { - adapter->current_dma.target = NULL; - } - - /* if this happens, we die */ - if (test_and_set_bit(0, (void *) &adapter->dmaing)) - pr_err("%s: rx blocked, DMA in progress, dir %d\n", - dev->name, adapter->current_dma.direction); - - adapter->current_dma.direction = 0; - adapter->current_dma.length = rlen; - adapter->current_dma.skb = skb; - adapter->current_dma.start_time = jiffies; - - outb_control(adapter->hcr_val | DIR | TCEN | DMAE, dev); - - flags=claim_dma_lock(); - disable_dma(dev->dma); - clear_dma_ff(dev->dma); - set_dma_mode(dev->dma, 0x04); /* dma read */ - set_dma_addr(dev->dma, isa_virt_to_bus(target)); - set_dma_count(dev->dma, rlen); - enable_dma(dev->dma); - release_dma_lock(flags); - - if (elp_debug >= 3) { - pr_debug("%s: rx DMA transfer started\n", dev->name); - } - - if (adapter->rx_active) - adapter->rx_active--; - - if (!adapter->busy) - pr_warning("%s: receive_packet called, busy not set.\n", dev->name); -} - -/****************************************************** - * - * interrupt handler - * - ******************************************************/ - -static irqreturn_t elp_interrupt(int irq, void *dev_id) -{ - int len; - int dlen; - int icount = 0; - struct net_device *dev = dev_id; - elp_device *adapter = netdev_priv(dev); - unsigned long timeout; - - spin_lock(&adapter->lock); - - do { - /* - * has a DMA transfer finished? - */ - if (inb_status(dev->base_addr) & DONE) { - if (!adapter->dmaing) - pr_warning("%s: phantom DMA completed\n", dev->name); - - if (elp_debug >= 3) - pr_debug("%s: %s DMA complete, status %02x\n", dev->name, - adapter->current_dma.direction ? "tx" : "rx", - inb_status(dev->base_addr)); - - outb_control(adapter->hcr_val & ~(DMAE | TCEN | DIR), dev); - if (adapter->current_dma.direction) { - dev_kfree_skb_irq(adapter->current_dma.skb); - } else { - struct sk_buff *skb = adapter->current_dma.skb; - if (skb) { - if (adapter->current_dma.target) { - /* have already done the skb_put() */ - memcpy(adapter->current_dma.target, adapter->dma_buffer, adapter->current_dma.length); - } - skb->protocol = eth_type_trans(skb,dev); - dev->stats.rx_bytes += skb->len; - netif_rx(skb); - } - } - adapter->dmaing = 0; - if (adapter->rx_backlog.in != adapter->rx_backlog.out) { - int t = adapter->rx_backlog.length[adapter->rx_backlog.out]; - adapter->rx_backlog.out = backlog_next(adapter->rx_backlog.out); - if (elp_debug >= 2) - pr_debug("%s: receiving backlogged packet (%d)\n", dev->name, t); - receive_packet(dev, t); - } else { - adapter->busy = 0; - } - } else { - /* has one timed out? */ - check_3c505_dma(dev); - } - - /* - * receive a PCB from the adapter - */ - timeout = jiffies + 3*HZ/100; - while ((inb_status(dev->base_addr) & ACRF) != 0 && time_before(jiffies, timeout)) { - if (receive_pcb(dev, &adapter->irx_pcb)) { - switch (adapter->irx_pcb.command) - { - case 0: - break; - /* - * received a packet - this must be handled fast - */ - case 0xff: - case CMD_RECEIVE_PACKET_COMPLETE: - /* if the device isn't open, don't pass packets up the stack */ - if (!netif_running(dev)) - break; - len = adapter->irx_pcb.data.rcv_resp.pkt_len; - dlen = adapter->irx_pcb.data.rcv_resp.buf_len; - if (adapter->irx_pcb.data.rcv_resp.timeout != 0) { - pr_err("%s: interrupt - packet not received correctly\n", dev->name); - } else { - if (elp_debug >= 3) { - pr_debug("%s: interrupt - packet received of length %i (%i)\n", - dev->name, len, dlen); - } - if (adapter->irx_pcb.command == 0xff) { - if (elp_debug >= 2) - pr_debug("%s: adding packet to backlog (len = %d)\n", - dev->name, dlen); - adapter->rx_backlog.length[adapter->rx_backlog.in] = dlen; - adapter->rx_backlog.in = backlog_next(adapter->rx_backlog.in); - } else { - receive_packet(dev, dlen); - } - if (elp_debug >= 3) - pr_debug("%s: packet received\n", dev->name); - } - break; - - /* - * 82586 configured correctly - */ - case CMD_CONFIGURE_82586_RESPONSE: - adapter->got[CMD_CONFIGURE_82586] = 1; - if (elp_debug >= 3) - pr_debug("%s: interrupt - configure response received\n", dev->name); - break; - - /* - * Adapter memory configuration - */ - case CMD_CONFIGURE_ADAPTER_RESPONSE: - adapter->got[CMD_CONFIGURE_ADAPTER_MEMORY] = 1; - if (elp_debug >= 3) - pr_debug("%s: Adapter memory configuration %s.\n", dev->name, - adapter->irx_pcb.data.failed ? "failed" : "succeeded"); - break; - - /* - * Multicast list loading - */ - case CMD_LOAD_MULTICAST_RESPONSE: - adapter->got[CMD_LOAD_MULTICAST_LIST] = 1; - if (elp_debug >= 3) - pr_debug("%s: Multicast address list loading %s.\n", dev->name, - adapter->irx_pcb.data.failed ? "failed" : "succeeded"); - break; - - /* - * Station address setting - */ - case CMD_SET_ADDRESS_RESPONSE: - adapter->got[CMD_SET_STATION_ADDRESS] = 1; - if (elp_debug >= 3) - pr_debug("%s: Ethernet address setting %s.\n", dev->name, - adapter->irx_pcb.data.failed ? "failed" : "succeeded"); - break; - - - /* - * received board statistics - */ - case CMD_NETWORK_STATISTICS_RESPONSE: - dev->stats.rx_packets += adapter->irx_pcb.data.netstat.tot_recv; - dev->stats.tx_packets += adapter->irx_pcb.data.netstat.tot_xmit; - dev->stats.rx_crc_errors += adapter->irx_pcb.data.netstat.err_CRC; - dev->stats.rx_frame_errors += adapter->irx_pcb.data.netstat.err_align; - dev->stats.rx_fifo_errors += adapter->irx_pcb.data.netstat.err_ovrrun; - dev->stats.rx_over_errors += adapter->irx_pcb.data.netstat.err_res; - adapter->got[CMD_NETWORK_STATISTICS] = 1; - if (elp_debug >= 3) - pr_debug("%s: interrupt - statistics response received\n", dev->name); - break; - - /* - * sent a packet - */ - case CMD_TRANSMIT_PACKET_COMPLETE: - if (elp_debug >= 3) - pr_debug("%s: interrupt - packet sent\n", dev->name); - if (!netif_running(dev)) - break; - switch (adapter->irx_pcb.data.xmit_resp.c_stat) { - case 0xffff: - dev->stats.tx_aborted_errors++; - pr_info("%s: transmit timed out, network cable problem?\n", dev->name); - break; - case 0xfffe: - dev->stats.tx_fifo_errors++; - pr_info("%s: transmit timed out, FIFO underrun\n", dev->name); - break; - } - netif_wake_queue(dev); - break; - - /* - * some unknown PCB - */ - default: - pr_debug("%s: unknown PCB received - %2.2x\n", - dev->name, adapter->irx_pcb.command); - break; - } - } else { - pr_warning("%s: failed to read PCB on interrupt\n", dev->name); - adapter_reset(dev); - } - } - - } while (icount++ < 5 && (inb_status(dev->base_addr) & (ACRF | DONE))); - - prime_rx(dev); - - /* - * indicate no longer in interrupt routine - */ - spin_unlock(&adapter->lock); - return IRQ_HANDLED; -} - - -/****************************************************** - * - * open the board - * - ******************************************************/ - -static int elp_open(struct net_device *dev) -{ - elp_device *adapter = netdev_priv(dev); - int retval; - - if (elp_debug >= 3) - pr_debug("%s: request to open device\n", dev->name); - - /* - * make sure we actually found the device - */ - if (adapter == NULL) { - pr_err("%s: Opening a non-existent physical device\n", dev->name); - return -EAGAIN; - } - /* - * disable interrupts on the board - */ - outb_control(0, dev); - - /* - * clear any pending interrupts - */ - inb_command(dev->base_addr); - adapter_reset(dev); - - /* - * no receive PCBs active - */ - adapter->rx_active = 0; - - adapter->busy = 0; - adapter->send_pcb_semaphore = 0; - adapter->rx_backlog.in = 0; - adapter->rx_backlog.out = 0; - - spin_lock_init(&adapter->lock); - - /* - * install our interrupt service routine - */ - if ((retval = request_irq(dev->irq, elp_interrupt, 0, dev->name, dev))) { - pr_err("%s: could not allocate IRQ%d\n", dev->name, dev->irq); - return retval; - } - if ((retval = request_dma(dev->dma, dev->name))) { - free_irq(dev->irq, dev); - pr_err("%s: could not allocate DMA%d channel\n", dev->name, dev->dma); - return retval; - } - adapter->dma_buffer = (void *) dma_mem_alloc(DMA_BUFFER_SIZE); - if (!adapter->dma_buffer) { - pr_err("%s: could not allocate DMA buffer\n", dev->name); - free_dma(dev->dma); - free_irq(dev->irq, dev); - return -ENOMEM; - } - adapter->dmaing = 0; - - /* - * enable interrupts on the board - */ - outb_control(CMDE, dev); - - /* - * configure adapter memory: we need 10 multicast addresses, default==0 - */ - if (elp_debug >= 3) - pr_debug("%s: sending 3c505 memory configuration command\n", dev->name); - adapter->tx_pcb.command = CMD_CONFIGURE_ADAPTER_MEMORY; - adapter->tx_pcb.data.memconf.cmd_q = 10; - adapter->tx_pcb.data.memconf.rcv_q = 20; - adapter->tx_pcb.data.memconf.mcast = 10; - adapter->tx_pcb.data.memconf.frame = 20; - adapter->tx_pcb.data.memconf.rcv_b = 20; - adapter->tx_pcb.data.memconf.progs = 0; - adapter->tx_pcb.length = sizeof(struct Memconf); - adapter->got[CMD_CONFIGURE_ADAPTER_MEMORY] = 0; - if (!send_pcb(dev, &adapter->tx_pcb)) - pr_err("%s: couldn't send memory configuration command\n", dev->name); - else { - unsigned long timeout = jiffies + TIMEOUT; - while (adapter->got[CMD_CONFIGURE_ADAPTER_MEMORY] == 0 && time_before(jiffies, timeout)); - if (time_after_eq(jiffies, timeout)) - TIMEOUT_MSG(__LINE__); - } - - - /* - * configure adapter to receive broadcast messages and wait for response - */ - if (elp_debug >= 3) - pr_debug("%s: sending 82586 configure command\n", dev->name); - adapter->tx_pcb.command = CMD_CONFIGURE_82586; - adapter->tx_pcb.data.configure = NO_LOOPBACK | RECV_BROAD; - adapter->tx_pcb.length = 2; - adapter->got[CMD_CONFIGURE_82586] = 0; - if (!send_pcb(dev, &adapter->tx_pcb)) - pr_err("%s: couldn't send 82586 configure command\n", dev->name); - else { - unsigned long timeout = jiffies + TIMEOUT; - while (adapter->got[CMD_CONFIGURE_82586] == 0 && time_before(jiffies, timeout)); - if (time_after_eq(jiffies, timeout)) - TIMEOUT_MSG(__LINE__); - } - - /* enable burst-mode DMA */ - /* outb(0x1, dev->base_addr + PORT_AUXDMA); */ - - /* - * queue receive commands to provide buffering - */ - prime_rx(dev); - if (elp_debug >= 3) - pr_debug("%s: %d receive PCBs active\n", dev->name, adapter->rx_active); - - /* - * device is now officially open! - */ - - netif_start_queue(dev); - return 0; -} - - -/****************************************************** - * - * send a packet to the adapter - * - ******************************************************/ - -static netdev_tx_t send_packet(struct net_device *dev, struct sk_buff *skb) -{ - elp_device *adapter = netdev_priv(dev); - unsigned long target; - unsigned long flags; - - /* - * make sure the length is even and no shorter than 60 bytes - */ - unsigned int nlen = (((skb->len < 60) ? 60 : skb->len) + 1) & (~1); - - if (test_and_set_bit(0, (void *) &adapter->busy)) { - if (elp_debug >= 2) - pr_debug("%s: transmit blocked\n", dev->name); - return false; - } - - dev->stats.tx_bytes += nlen; - - /* - * send the adapter a transmit packet command. Ignore segment and offset - * and make sure the length is even - */ - adapter->tx_pcb.command = CMD_TRANSMIT_PACKET; - adapter->tx_pcb.length = sizeof(struct Xmit_pkt); - adapter->tx_pcb.data.xmit_pkt.buf_ofs - = adapter->tx_pcb.data.xmit_pkt.buf_seg = 0; /* Unused */ - adapter->tx_pcb.data.xmit_pkt.pkt_len = nlen; - - if (!send_pcb(dev, &adapter->tx_pcb)) { - adapter->busy = 0; - return false; - } - /* if this happens, we die */ - if (test_and_set_bit(0, (void *) &adapter->dmaing)) - pr_debug("%s: tx: DMA %d in progress\n", dev->name, adapter->current_dma.direction); - - adapter->current_dma.direction = 1; - adapter->current_dma.start_time = jiffies; - - if ((unsigned long)(skb->data + nlen) >= MAX_DMA_ADDRESS || nlen != skb->len) { - skb_copy_from_linear_data(skb, adapter->dma_buffer, nlen); - memset(adapter->dma_buffer+skb->len, 0, nlen-skb->len); - target = isa_virt_to_bus(adapter->dma_buffer); - } - else { - target = isa_virt_to_bus(skb->data); - } - adapter->current_dma.skb = skb; - - flags=claim_dma_lock(); - disable_dma(dev->dma); - clear_dma_ff(dev->dma); - set_dma_mode(dev->dma, 0x48); /* dma memory -> io */ - set_dma_addr(dev->dma, target); - set_dma_count(dev->dma, nlen); - outb_control(adapter->hcr_val | DMAE | TCEN, dev); - enable_dma(dev->dma); - release_dma_lock(flags); - - if (elp_debug >= 3) - pr_debug("%s: DMA transfer started\n", dev->name); - - return true; -} - -/* - * The upper layer thinks we timed out - */ - -static void elp_timeout(struct net_device *dev) -{ - int stat; - - stat = inb_status(dev->base_addr); - pr_warning("%s: transmit timed out, lost %s?\n", dev->name, - (stat & ACRF) ? "interrupt" : "command"); - if (elp_debug >= 1) - pr_debug("%s: status %#02x\n", dev->name, stat); - dev->trans_start = jiffies; /* prevent tx timeout */ - dev->stats.tx_dropped++; - netif_wake_queue(dev); -} - -/****************************************************** - * - * start the transmitter - * return 0 if sent OK, else return 1 - * - ******************************************************/ - -static netdev_tx_t elp_start_xmit(struct sk_buff *skb, struct net_device *dev) -{ - unsigned long flags; - elp_device *adapter = netdev_priv(dev); - - spin_lock_irqsave(&adapter->lock, flags); - check_3c505_dma(dev); - - if (elp_debug >= 3) - pr_debug("%s: request to send packet of length %d\n", dev->name, (int) skb->len); - - netif_stop_queue(dev); - - /* - * send the packet at skb->data for skb->len - */ - if (!send_packet(dev, skb)) { - if (elp_debug >= 2) { - pr_debug("%s: failed to transmit packet\n", dev->name); - } - spin_unlock_irqrestore(&adapter->lock, flags); - return NETDEV_TX_BUSY; - } - if (elp_debug >= 3) - pr_debug("%s: packet of length %d sent\n", dev->name, (int) skb->len); - - prime_rx(dev); - spin_unlock_irqrestore(&adapter->lock, flags); - netif_start_queue(dev); - return NETDEV_TX_OK; -} - -/****************************************************** - * - * return statistics on the board - * - ******************************************************/ - -static struct net_device_stats *elp_get_stats(struct net_device *dev) -{ - elp_device *adapter = netdev_priv(dev); - - if (elp_debug >= 3) - pr_debug("%s: request for stats\n", dev->name); - - /* If the device is closed, just return the latest stats we have, - - we cannot ask from the adapter without interrupts */ - if (!netif_running(dev)) - return &dev->stats; - - /* send a get statistics command to the board */ - adapter->tx_pcb.command = CMD_NETWORK_STATISTICS; - adapter->tx_pcb.length = 0; - adapter->got[CMD_NETWORK_STATISTICS] = 0; - if (!send_pcb(dev, &adapter->tx_pcb)) - pr_err("%s: couldn't send get statistics command\n", dev->name); - else { - unsigned long timeout = jiffies + TIMEOUT; - while (adapter->got[CMD_NETWORK_STATISTICS] == 0 && time_before(jiffies, timeout)); - if (time_after_eq(jiffies, timeout)) { - TIMEOUT_MSG(__LINE__); - return &dev->stats; - } - } - - /* statistics are now up to date */ - return &dev->stats; -} - - -static void netdev_get_drvinfo(struct net_device *dev, - struct ethtool_drvinfo *info) -{ - strcpy(info->driver, DRV_NAME); - strcpy(info->version, DRV_VERSION); - sprintf(info->bus_info, "ISA 0x%lx", dev->base_addr); -} - -static u32 netdev_get_msglevel(struct net_device *dev) -{ - return debug; -} - -static void netdev_set_msglevel(struct net_device *dev, u32 level) -{ - debug = level; -} - -static const struct ethtool_ops netdev_ethtool_ops = { - .get_drvinfo = netdev_get_drvinfo, - .get_msglevel = netdev_get_msglevel, - .set_msglevel = netdev_set_msglevel, -}; - -/****************************************************** - * - * close the board - * - ******************************************************/ - -static int elp_close(struct net_device *dev) -{ - elp_device *adapter = netdev_priv(dev); - - if (elp_debug >= 3) - pr_debug("%s: request to close device\n", dev->name); - - netif_stop_queue(dev); - - /* Someone may request the device statistic information even when - * the interface is closed. The following will update the statistics - * structure in the driver, so we'll be able to give current statistics. - */ - (void) elp_get_stats(dev); - - /* - * disable interrupts on the board - */ - outb_control(0, dev); - - /* - * release the IRQ - */ - free_irq(dev->irq, dev); - - free_dma(dev->dma); - free_pages((unsigned long) adapter->dma_buffer, get_order(DMA_BUFFER_SIZE)); - - return 0; -} - - -/************************************************************ - * - * Set multicast list - * num_addrs==0: clear mc_list - * num_addrs==-1: set promiscuous mode - * num_addrs>0: set mc_list - * - ************************************************************/ - -static void elp_set_mc_list(struct net_device *dev) -{ - elp_device *adapter = netdev_priv(dev); - struct netdev_hw_addr *ha; - int i; - unsigned long flags; - - if (elp_debug >= 3) - pr_debug("%s: request to set multicast list\n", dev->name); - - spin_lock_irqsave(&adapter->lock, flags); - - if (!(dev->flags & (IFF_PROMISC | IFF_ALLMULTI))) { - /* send a "load multicast list" command to the board, max 10 addrs/cmd */ - /* if num_addrs==0 the list will be cleared */ - adapter->tx_pcb.command = CMD_LOAD_MULTICAST_LIST; - adapter->tx_pcb.length = 6 * netdev_mc_count(dev); - i = 0; - netdev_for_each_mc_addr(ha, dev) - memcpy(adapter->tx_pcb.data.multicast[i++], - ha->addr, 6); - adapter->got[CMD_LOAD_MULTICAST_LIST] = 0; - if (!send_pcb(dev, &adapter->tx_pcb)) - pr_err("%s: couldn't send set_multicast command\n", dev->name); - else { - unsigned long timeout = jiffies + TIMEOUT; - while (adapter->got[CMD_LOAD_MULTICAST_LIST] == 0 && time_before(jiffies, timeout)); - if (time_after_eq(jiffies, timeout)) { - TIMEOUT_MSG(__LINE__); - } - } - if (!netdev_mc_empty(dev)) - adapter->tx_pcb.data.configure = NO_LOOPBACK | RECV_BROAD | RECV_MULTI; - else /* num_addrs == 0 */ - adapter->tx_pcb.data.configure = NO_LOOPBACK | RECV_BROAD; - } else - adapter->tx_pcb.data.configure = NO_LOOPBACK | RECV_PROMISC; - /* - * configure adapter to receive messages (as specified above) - * and wait for response - */ - if (elp_debug >= 3) - pr_debug("%s: sending 82586 configure command\n", dev->name); - adapter->tx_pcb.command = CMD_CONFIGURE_82586; - adapter->tx_pcb.length = 2; - adapter->got[CMD_CONFIGURE_82586] = 0; - if (!send_pcb(dev, &adapter->tx_pcb)) - { - spin_unlock_irqrestore(&adapter->lock, flags); - pr_err("%s: couldn't send 82586 configure command\n", dev->name); - } - else { - unsigned long timeout = jiffies + TIMEOUT; - spin_unlock_irqrestore(&adapter->lock, flags); - while (adapter->got[CMD_CONFIGURE_82586] == 0 && time_before(jiffies, timeout)); - if (time_after_eq(jiffies, timeout)) - TIMEOUT_MSG(__LINE__); - } -} - -/************************************************************ - * - * A couple of tests to see if there's 3C505 or not - * Called only by elp_autodetect - ************************************************************/ - -static int __init elp_sense(struct net_device *dev) -{ - int addr = dev->base_addr; - const char *name = dev->name; - byte orig_HSR; - - if (!request_region(addr, ELP_IO_EXTENT, "3c505")) - return -ENODEV; - - orig_HSR = inb_status(addr); - - if (elp_debug > 0) - pr_debug(search_msg, name, addr); - - if (orig_HSR == 0xff) { - if (elp_debug > 0) - pr_cont(notfound_msg, 1); - goto out; - } - - /* Wait for a while; the adapter may still be booting up */ - if (elp_debug > 0) - pr_cont(stilllooking_msg); - - if (orig_HSR & DIR) { - /* If HCR.DIR is up, we pull it down. HSR.DIR should follow. */ - outb(0, dev->base_addr + PORT_CONTROL); - msleep(300); - if (inb_status(addr) & DIR) { - if (elp_debug > 0) - pr_cont(notfound_msg, 2); - goto out; - } - } else { - /* If HCR.DIR is down, we pull it up. HSR.DIR should follow. */ - outb(DIR, dev->base_addr + PORT_CONTROL); - msleep(300); - if (!(inb_status(addr) & DIR)) { - if (elp_debug > 0) - pr_cont(notfound_msg, 3); - goto out; - } - } - /* - * It certainly looks like a 3c505. - */ - if (elp_debug > 0) - pr_cont(found_msg); - - return 0; -out: - release_region(addr, ELP_IO_EXTENT); - return -ENODEV; -} - -/************************************************************* - * - * Search through addr_list[] and try to find a 3C505 - * Called only by eplus_probe - *************************************************************/ - -static int __init elp_autodetect(struct net_device *dev) -{ - int idx = 0; - - /* if base address set, then only check that address - otherwise, run through the table */ - if (dev->base_addr != 0) { /* dev->base_addr == 0 ==> plain autodetect */ - if (elp_sense(dev) == 0) - return dev->base_addr; - } else - while ((dev->base_addr = addr_list[idx++])) { - if (elp_sense(dev) == 0) - return dev->base_addr; - } - - /* could not find an adapter */ - if (elp_debug > 0) - pr_debug(couldnot_msg, dev->name); - - return 0; /* Because of this, the layer above will return -ENODEV */ -} - -static const struct net_device_ops elp_netdev_ops = { - .ndo_open = elp_open, - .ndo_stop = elp_close, - .ndo_get_stats = elp_get_stats, - .ndo_start_xmit = elp_start_xmit, - .ndo_tx_timeout = elp_timeout, - .ndo_set_multicast_list = elp_set_mc_list, - .ndo_change_mtu = eth_change_mtu, - .ndo_set_mac_address = eth_mac_addr, - .ndo_validate_addr = eth_validate_addr, -}; - -/****************************************************** - * - * probe for an Etherlink Plus board at the specified address - * - ******************************************************/ - -/* There are three situations we need to be able to detect here: - - * a) the card is idle - * b) the card is still booting up - * c) the card is stuck in a strange state (some DOS drivers do this) - * - * In case (a), all is well. In case (b), we wait 10 seconds to see if the - * card finishes booting, and carry on if so. In case (c), we do a hard reset, - * loop round, and hope for the best. - * - * This is all very unpleasant, but hopefully avoids the problems with the old - * probe code (which had a 15-second delay if the card was idle, and didn't - * work at all if it was in a weird state). - */ - -static int __init elplus_setup(struct net_device *dev) -{ - elp_device *adapter = netdev_priv(dev); - int i, tries, tries1, okay; - unsigned long timeout; - unsigned long cookie = 0; - int err = -ENODEV; - - /* - * setup adapter structure - */ - - dev->base_addr = elp_autodetect(dev); - if (!dev->base_addr) - return -ENODEV; - - adapter->send_pcb_semaphore = 0; - - for (tries1 = 0; tries1 < 3; tries1++) { - outb_control((adapter->hcr_val | CMDE) & ~DIR, dev); - /* First try to write just one byte, to see if the card is - * responding at all normally. - */ - timeout = jiffies + 5*HZ/100; - okay = 0; - while (time_before(jiffies, timeout) && !(inb_status(dev->base_addr) & HCRE)); - if ((inb_status(dev->base_addr) & HCRE)) { - outb_command(0, dev->base_addr); /* send a spurious byte */ - timeout = jiffies + 5*HZ/100; - while (time_before(jiffies, timeout) && !(inb_status(dev->base_addr) & HCRE)); - if (inb_status(dev->base_addr) & HCRE) - okay = 1; - } - if (!okay) { - /* Nope, it's ignoring the command register. This means that - * either it's still booting up, or it's died. - */ - pr_err("%s: command register wouldn't drain, ", dev->name); - if ((inb_status(dev->base_addr) & 7) == 3) { - /* If the adapter status is 3, it *could* still be booting. - * Give it the benefit of the doubt for 10 seconds. - */ - pr_cont("assuming 3c505 still starting\n"); - timeout = jiffies + 10*HZ; - while (time_before(jiffies, timeout) && (inb_status(dev->base_addr) & 7)); - if (inb_status(dev->base_addr) & 7) { - pr_err("%s: 3c505 failed to start\n", dev->name); - } else { - okay = 1; /* It started */ - } - } else { - /* Otherwise, it must just be in a strange - * state. We probably need to kick it. - */ - pr_cont("3c505 is sulking\n"); - } - } - for (tries = 0; tries < 5 && okay; tries++) { - - /* - * Try to set the Ethernet address, to make sure that the board - * is working. - */ - adapter->tx_pcb.command = CMD_STATION_ADDRESS; - adapter->tx_pcb.length = 0; - cookie = probe_irq_on(); - if (!send_pcb(dev, &adapter->tx_pcb)) { - pr_err("%s: could not send first PCB\n", dev->name); - probe_irq_off(cookie); - continue; - } - if (!receive_pcb(dev, &adapter->rx_pcb)) { - pr_err("%s: could not read first PCB\n", dev->name); - probe_irq_off(cookie); - continue; - } - if ((adapter->rx_pcb.command != CMD_ADDRESS_RESPONSE) || - (adapter->rx_pcb.length != 6)) { - pr_err("%s: first PCB wrong (%d, %d)\n", dev->name, - adapter->rx_pcb.command, adapter->rx_pcb.length); - probe_irq_off(cookie); - continue; - } - goto okay; - } - /* It's broken. Do a hard reset to re-initialise the board, - * and try again. - */ - pr_info("%s: resetting adapter\n", dev->name); - outb_control(adapter->hcr_val | FLSH | ATTN, dev); - outb_control(adapter->hcr_val & ~(FLSH | ATTN), dev); - } - pr_err("%s: failed to initialise 3c505\n", dev->name); - goto out; - - okay: - if (dev->irq) { /* Is there a preset IRQ? */ - int rpt = probe_irq_off(cookie); - if (dev->irq != rpt) { - pr_warning("%s: warning, irq %d configured but %d detected\n", dev->name, dev->irq, rpt); - } - /* if dev->irq == probe_irq_off(cookie), all is well */ - } else /* No preset IRQ; just use what we can detect */ - dev->irq = probe_irq_off(cookie); - switch (dev->irq) { /* Legal, sane? */ - case 0: - pr_err("%s: IRQ probe failed: check 3c505 jumpers.\n", - dev->name); - goto out; - case 1: - case 6: - case 8: - case 13: - pr_err("%s: Impossible IRQ %d reported by probe_irq_off().\n", - dev->name, dev->irq); - goto out; - } - /* - * Now we have the IRQ number so we can disable the interrupts from - * the board until the board is opened. - */ - outb_control(adapter->hcr_val & ~CMDE, dev); - - /* - * copy Ethernet address into structure - */ - for (i = 0; i < 6; i++) - dev->dev_addr[i] = adapter->rx_pcb.data.eth_addr[i]; - - /* find a DMA channel */ - if (!dev->dma) { - if (dev->mem_start) { - dev->dma = dev->mem_start & 7; - } - else { - pr_warning("%s: warning, DMA channel not specified, using default\n", dev->name); - dev->dma = ELP_DMA; - } - } - - /* - * print remainder of startup message - */ - pr_info("%s: 3c505 at %#lx, irq %d, dma %d, addr %pM, ", - dev->name, dev->base_addr, dev->irq, dev->dma, dev->dev_addr); - /* - * read more information from the adapter - */ - - adapter->tx_pcb.command = CMD_ADAPTER_INFO; - adapter->tx_pcb.length = 0; - if (!send_pcb(dev, &adapter->tx_pcb) || - !receive_pcb(dev, &adapter->rx_pcb) || - (adapter->rx_pcb.command != CMD_ADAPTER_INFO_RESPONSE) || - (adapter->rx_pcb.length != 10)) { - pr_cont("not responding to second PCB\n"); - } - pr_cont("rev %d.%d, %dk\n", adapter->rx_pcb.data.info.major_vers, - adapter->rx_pcb.data.info.minor_vers, adapter->rx_pcb.data.info.RAM_sz); - - /* - * reconfigure the adapter memory to better suit our purposes - */ - adapter->tx_pcb.command = CMD_CONFIGURE_ADAPTER_MEMORY; - adapter->tx_pcb.length = 12; - adapter->tx_pcb.data.memconf.cmd_q = 8; - adapter->tx_pcb.data.memconf.rcv_q = 8; - adapter->tx_pcb.data.memconf.mcast = 10; - adapter->tx_pcb.data.memconf.frame = 10; - adapter->tx_pcb.data.memconf.rcv_b = 10; - adapter->tx_pcb.data.memconf.progs = 0; - if (!send_pcb(dev, &adapter->tx_pcb) || - !receive_pcb(dev, &adapter->rx_pcb) || - (adapter->rx_pcb.command != CMD_CONFIGURE_ADAPTER_RESPONSE) || - (adapter->rx_pcb.length != 2)) { - pr_err("%s: could not configure adapter memory\n", dev->name); - } - if (adapter->rx_pcb.data.configure) { - pr_err("%s: adapter configuration failed\n", dev->name); - } - - dev->netdev_ops = &elp_netdev_ops; - dev->watchdog_timeo = 10*HZ; - dev->ethtool_ops = &netdev_ethtool_ops; /* local */ - - dev->mem_start = dev->mem_end = 0; - - err = register_netdev(dev); - if (err) - goto out; - - return 0; -out: - release_region(dev->base_addr, ELP_IO_EXTENT); - return err; -} - -#ifndef MODULE -struct net_device * __init elplus_probe(int unit) -{ - struct net_device *dev = alloc_etherdev(sizeof(elp_device)); - int err; - if (!dev) - return ERR_PTR(-ENOMEM); - - sprintf(dev->name, "eth%d", unit); - netdev_boot_setup_check(dev); - - err = elplus_setup(dev); - if (err) { - free_netdev(dev); - return ERR_PTR(err); - } - return dev; -} - -#else -static struct net_device *dev_3c505[ELP_MAX_CARDS]; -static int io[ELP_MAX_CARDS]; -static int irq[ELP_MAX_CARDS]; -static int dma[ELP_MAX_CARDS]; -module_param_array(io, int, NULL, 0); -module_param_array(irq, int, NULL, 0); -module_param_array(dma, int, NULL, 0); -MODULE_PARM_DESC(io, "EtherLink Plus I/O base address(es)"); -MODULE_PARM_DESC(irq, "EtherLink Plus IRQ number(s) (assigned)"); -MODULE_PARM_DESC(dma, "EtherLink Plus DMA channel(s)"); - -int __init init_module(void) -{ - int this_dev, found = 0; - - for (this_dev = 0; this_dev < ELP_MAX_CARDS; this_dev++) { - struct net_device *dev = alloc_etherdev(sizeof(elp_device)); - if (!dev) - break; - - dev->irq = irq[this_dev]; - dev->base_addr = io[this_dev]; - if (dma[this_dev]) { - dev->dma = dma[this_dev]; - } else { - dev->dma = ELP_DMA; - pr_warning("3c505.c: warning, using default DMA channel,\n"); - } - if (io[this_dev] == 0) { - if (this_dev) { - free_netdev(dev); - break; - } - pr_notice("3c505.c: module autoprobe not recommended, give io=xx.\n"); - } - if (elplus_setup(dev) != 0) { - pr_warning("3c505.c: Failed to register card at 0x%x.\n", io[this_dev]); - free_netdev(dev); - break; - } - dev_3c505[this_dev] = dev; - found++; - } - if (!found) - return -ENODEV; - return 0; -} - -void __exit cleanup_module(void) -{ - int this_dev; - - for (this_dev = 0; this_dev < ELP_MAX_CARDS; this_dev++) { - struct net_device *dev = dev_3c505[this_dev]; - if (dev) { - unregister_netdev(dev); - release_region(dev->base_addr, ELP_IO_EXTENT); - free_netdev(dev); - } - } -} - -#endif /* MODULE */ -MODULE_LICENSE("GPL"); |