Merge tag 'spi-nor/for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux into mtd/next

SPI NOR core changes:
- add, update support and fix few flashes
- prepare BFPT parsing for JESD216 rev D
- kernel doc fixes

12 files changed, 122 insertions, 44 deletions

diff --git a/drivers/mtd/spi-nor/Kconfig b/drivers/mtd/spi-nor/Kconfig
index 6e816eafb312..ffc4b380f2b1 100644
--- a/drivers/mtd/spi-nor/Kconfig
+++ b/drivers/mtd/spi-nor/Kconfig
@@ -1,12 +1,12 @@
 # SPDX-License-Identifier: GPL-2.0-only
 menuconfig MTD_SPI_NOR
-	tristate "SPI-NOR device support"
+	tristate "SPI NOR device support"
 	depends on MTD
 	depends on MTD && SPI_MASTER
 	select SPI_MEM
 	help
 	  This is the framework for the SPI NOR which can be used by the SPI
-	  device drivers and the SPI-NOR device driver.
+	  device drivers and the SPI NOR device driver.
 
 if MTD_SPI_NOR
 
diff --git a/drivers/mtd/spi-nor/controllers/Kconfig b/drivers/mtd/spi-nor/controllers/Kconfig
index 10b86660b821..d89a5ea9446a 100644
--- a/drivers/mtd/spi-nor/controllers/Kconfig
+++ b/drivers/mtd/spi-nor/controllers/Kconfig
@@ -21,11 +21,11 @@ config SPI_CADENCE_QUADSPI
 	  Flash as an MTD device.
 
 config SPI_HISI_SFC
-	tristate "Hisilicon FMC SPI-NOR Flash Controller(SFC)"
+	tristate "Hisilicon FMC SPI NOR Flash Controller(SFC)"
 	depends on ARCH_HISI || COMPILE_TEST
 	depends on HAS_IOMEM
 	help
-	  This enables support for HiSilicon FMC SPI-NOR flash controller.
+	  This enables support for HiSilicon FMC SPI NOR flash controller.
 
 config SPI_NXP_SPIFI
 	tristate "NXP SPI Flash Interface (SPIFI)"
diff --git a/drivers/mtd/spi-nor/controllers/aspeed-smc.c b/drivers/mtd/spi-nor/controllers/aspeed-smc.c
index ae85e4c0e114..7225870e8b18 100644
--- a/drivers/mtd/spi-nor/controllers/aspeed-smc.c
+++ b/drivers/mtd/spi-nor/controllers/aspeed-smc.c
@@ -727,7 +727,7 @@ static int aspeed_smc_chip_setup_finish(struct aspeed_smc_chip *chip)
 
 	/*
 	 * TODO: Adjust clocks if fast read is supported and interpret
-	 * SPI-NOR flags to adjust controller settings.
+	 * SPI NOR flags to adjust controller settings.
 	 */
 	if (chip->nor.read_proto == SNOR_PROTO_1_1_1) {
 		if (chip->nor.read_dummy == 0)
diff --git a/drivers/mtd/spi-nor/controllers/hisi-sfc.c b/drivers/mtd/spi-nor/controllers/hisi-sfc.c
index 6c7a4118752e..95c502173cbd 100644
--- a/drivers/mtd/spi-nor/controllers/hisi-sfc.c
+++ b/drivers/mtd/spi-nor/controllers/hisi-sfc.c
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-or-later
 /*
- * HiSilicon FMC SPI-NOR flash controller driver
+ * HiSilicon FMC SPI NOR flash controller driver
  *
  * Copyright (c) 2015-2016 HiSilicon Technologies Co., Ltd.
  */
diff --git a/drivers/mtd/spi-nor/controllers/nxp-spifi.c b/drivers/mtd/spi-nor/controllers/nxp-spifi.c
index 9a5b1a7c636a..5703e8313980 100644
--- a/drivers/mtd/spi-nor/controllers/nxp-spifi.c
+++ b/drivers/mtd/spi-nor/controllers/nxp-spifi.c
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * SPI-NOR driver for NXP SPI Flash Interface (SPIFI)
+ * SPI NOR driver for NXP SPI Flash Interface (SPIFI)
  *
  * Copyright (C) 2015 Joachim Eastwood <manabian@gmail.com>
  *
diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c
index cc68ea84318e..0369d98b2d12 100644
--- a/drivers/mtd/spi-nor/core.c
+++ b/drivers/mtd/spi-nor/core.c
@@ -499,7 +499,7 @@ int spi_nor_xread_sr(struct spi_nor *nor, u8 *sr)
  * the flash is ready for new commands.
  * @nor:	pointer to 'struct spi_nor'.
  *
- * Return: 0 on success, -errno otherwise.
+ * Return: 1 if ready, 0 if not ready, -errno on errors.
  */
 static int spi_nor_xsr_ready(struct spi_nor *nor)
 {
@@ -542,7 +542,7 @@ static void spi_nor_clear_sr(struct spi_nor *nor)
  * for new commands.
  * @nor:	pointer to 'struct spi_nor'.
  *
- * Return: 0 on success, -errno otherwise.
+ * Return: 1 if ready, 0 if not ready, -errno on errors.
  */
 static int spi_nor_sr_ready(struct spi_nor *nor)
 {
@@ -606,7 +606,7 @@ static void spi_nor_clear_fsr(struct spi_nor *nor)
  * ready for new commands.
  * @nor:	pointer to 'struct spi_nor'.
  *
- * Return: 0 on success, -errno otherwise.
+ * Return: 1 if ready, 0 if not ready, -errno on errors.
  */
 static int spi_nor_fsr_ready(struct spi_nor *nor)
 {
@@ -640,14 +640,14 @@ static int spi_nor_fsr_ready(struct spi_nor *nor)
 		return -EIO;
 	}
 
-	return nor->bouncebuf[0] & FSR_READY;
+	return !!(nor->bouncebuf[0] & FSR_READY);
 }
 
 /**
  * spi_nor_ready() - Query the flash to see if it is ready for new commands.
  * @nor:	pointer to 'struct spi_nor'.
  *
- * Return: 0 on success, -errno otherwise.
+ * Return: 1 if ready, 0 if not ready, -errno on errors.
  */
 static int spi_nor_ready(struct spi_nor *nor)
 {
@@ -2469,7 +2469,7 @@ static int spi_nor_select_read(struct spi_nor *nor,
 	nor->read_proto = read->proto;
 
 	/*
-	 * In the spi-nor framework, we don't need to make the difference
+	 * In the SPI NOR framework, we don't need to make the difference
 	 * between mode clock cycles and wait state clock cycles.
 	 * Indeed, the value of the mode clock cycles is used by a QSPI
 	 * flash memory to know whether it should enter or leave its 0-4-4
@@ -2675,7 +2675,7 @@ static int spi_nor_setup(struct spi_nor *nor,
 /**
  * spi_nor_manufacturer_init_params() - Initialize the flash's parameters and
  * settings based on MFR register and ->default_init() hook.
- * @nor:	pointer to a 'struct spi-nor'.
+ * @nor:	pointer to a 'struct spi_nor'.
  */
 static void spi_nor_manufacturer_init_params(struct spi_nor *nor)
 {
@@ -2690,7 +2690,7 @@ static void spi_nor_manufacturer_init_params(struct spi_nor *nor)
 /**
  * spi_nor_sfdp_init_params() - Initialize the flash's parameters and settings
  * based on JESD216 SFDP standard.
- * @nor:	pointer to a 'struct spi-nor'.
+ * @nor:	pointer to a 'struct spi_nor'.
  *
  * The method has a roll-back mechanism: in case the SFDP parsing fails, the
  * legacy flash parameters and settings will be restored.
@@ -2712,7 +2712,7 @@ static void spi_nor_sfdp_init_params(struct spi_nor *nor)
 /**
  * spi_nor_info_init_params() - Initialize the flash's parameters and settings
  * based on nor->info data.
- * @nor:	pointer to a 'struct spi-nor'.
+ * @nor:	pointer to a 'struct spi_nor'.
  */
 static void spi_nor_info_init_params(struct spi_nor *nor)
 {
@@ -2841,7 +2841,7 @@ static void spi_nor_late_init_params(struct spi_nor *nor)
 
 /**
  * spi_nor_init_params() - Initialize the flash's parameters and settings.
- * @nor:	pointer to a 'struct spi-nor'.
+ * @nor:	pointer to a 'struct spi_nor'.
  *
  * The flash parameters and settings are initialized based on a sequence of
  * calls that are ordered by priority:
@@ -3126,7 +3126,7 @@ int spi_nor_scan(struct spi_nor *nor, const char *name,
 	/*
 	 * Make sure the XSR_RDY flag is set before calling
 	 * spi_nor_wait_till_ready(). Xilinx S3AN share MFR
-	 * with Atmel spi-nor
+	 * with Atmel SPI NOR.
 	 */
 	if (info->flags & SPI_NOR_XSR_RDY)
 		nor->flags |=  SNOR_F_READY_XSR_RDY;
diff --git a/drivers/mtd/spi-nor/macronix.c b/drivers/mtd/spi-nor/macronix.c
index ab0f963d630c..96735d83c77c 100644
--- a/drivers/mtd/spi-nor/macronix.c
+++ b/drivers/mtd/spi-nor/macronix.c
@@ -63,10 +63,16 @@ static const struct flash_info macronix_parts[] = {
 		.fixups = &mx25l25635_fixups },
 	{ "mx25u25635f", INFO(0xc22539, 0, 64 * 1024, 512,
 			      SECT_4K | SPI_NOR_4B_OPCODES) },
+	{ "mx25u51245g", INFO(0xc2253a, 0, 64 * 1024, 1024,
+			      SECT_4K | SPI_NOR_DUAL_READ |
+			      SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) },
 	{ "mx25v8035f",  INFO(0xc22314, 0, 64 * 1024,  16,
 			      SECT_4K | SPI_NOR_DUAL_READ |
 			      SPI_NOR_QUAD_READ) },
 	{ "mx25l25655e", INFO(0xc22619, 0, 64 * 1024, 512, 0) },
+	{ "mx25l51245g", INFO(0xc2201a, 0, 64 * 1024, 1024,
+			      SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
+			      SPI_NOR_4B_OPCODES) },
 	{ "mx66l51235l", INFO(0xc2201a, 0, 64 * 1024, 1024,
 			      SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
 			      SPI_NOR_4B_OPCODES) },
diff --git a/drivers/mtd/spi-nor/micron-st.c b/drivers/mtd/spi-nor/micron-st.c
index 6c034b9718e2..3dca5b9af3b6 100644
--- a/drivers/mtd/spi-nor/micron-st.c
+++ b/drivers/mtd/spi-nor/micron-st.c
@@ -29,7 +29,9 @@ static const struct flash_info st_parts[] = {
 	{ "n25q064a",    INFO(0x20bb17, 0, 64 * 1024,  128,
 			      SECT_4K | SPI_NOR_QUAD_READ) },
 	{ "n25q128a11",  INFO(0x20bb18, 0, 64 * 1024,  256,
-			      SECT_4K | USE_FSR | SPI_NOR_QUAD_READ) },
+			      SECT_4K | USE_FSR | SPI_NOR_QUAD_READ |
+			      SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB |
+			      SPI_NOR_4BIT_BP | SPI_NOR_BP3_SR_BIT6) },
 	{ "n25q128a13",  INFO(0x20ba18, 0, 64 * 1024,  256,
 			      SECT_4K | USE_FSR | SPI_NOR_QUAD_READ) },
 	{ "mt25ql256a",  INFO6(0x20ba19, 0x104400, 64 * 1024,  512,
@@ -59,6 +61,8 @@ static const struct flash_info st_parts[] = {
 			      SPI_NOR_4BIT_BP | SPI_NOR_BP3_SR_BIT6) },
 	{ "n25q00",      INFO(0x20ba21, 0, 64 * 1024, 2048,
 			      SECT_4K | USE_FSR | SPI_NOR_QUAD_READ |
+			      SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB |
+			      SPI_NOR_4BIT_BP | SPI_NOR_BP3_SR_BIT6 |
 			      NO_CHIP_ERASE) },
 	{ "n25q00a",     INFO(0x20bb21, 0, 64 * 1024, 2048,
 			      SECT_4K | USE_FSR | SPI_NOR_QUAD_READ |
diff --git a/drivers/mtd/spi-nor/sfdp.c b/drivers/mtd/spi-nor/sfdp.c
index f6038d3a3684..55c0c508464b 100644
--- a/drivers/mtd/spi-nor/sfdp.c
+++ b/drivers/mtd/spi-nor/sfdp.c
@@ -21,10 +21,6 @@
 #define SFDP_4BAIT_ID		0xff84  /* 4-byte Address Instruction Table */
 
 #define SFDP_SIGNATURE		0x50444653U
-#define SFDP_JESD216_MAJOR	1
-#define SFDP_JESD216_MINOR	0
-#define SFDP_JESD216A_MINOR	5
-#define SFDP_JESD216B_MINOR	6
 
 struct sfdp_header {
 	u32		signature; /* Ox50444653U <=> "SFDP" */
@@ -437,7 +433,7 @@ static int spi_nor_parse_bfpt(struct spi_nor *nor,
 	struct sfdp_bfpt bfpt;
 	size_t len;
 	int i, cmd, err;
-	u32 addr;
+	u32 addr, val;
 	u16 half;
 	u8 erase_mask;
 
@@ -460,6 +456,7 @@ static int spi_nor_parse_bfpt(struct spi_nor *nor,
 	/* Number of address bytes. */
 	switch (bfpt.dwords[BFPT_DWORD(1)] & BFPT_DWORD1_ADDRESS_BYTES_MASK) {
 	case BFPT_DWORD1_ADDRESS_BYTES_3_ONLY:
+	case BFPT_DWORD1_ADDRESS_BYTES_3_OR_4:
 		nor->addr_width = 3;
 		break;
 
@@ -472,21 +469,21 @@ static int spi_nor_parse_bfpt(struct spi_nor *nor,
 	}
 
 	/* Flash Memory Density (in bits). */
-	params->size = bfpt.dwords[BFPT_DWORD(2)];
-	if (params->size & BIT(31)) {
-		params->size &= ~BIT(31);
+	val = bfpt.dwords[BFPT_DWORD(2)];
+	if (val & BIT(31)) {
+		val &= ~BIT(31);
 
 		/*
 		 * Prevent overflows on params->size. Anyway, a NOR of 2^64
 		 * bits is unlikely to exist so this error probably means
 		 * the BFPT we are reading is corrupted/wrong.
 		 */
-		if (params->size > 63)
+		if (val > 63)
 			return -EINVAL;
 
-		params->size = 1ULL << params->size;
+		params->size = 1ULL << val;
 	} else {
-		params->size++;
+		params->size = val + 1;
 	}
 	params->size >>= 3; /* Convert to bytes. */
 
@@ -548,15 +545,15 @@ static int spi_nor_parse_bfpt(struct spi_nor *nor,
 				  SNOR_ERASE_TYPE_MASK;
 
 	/* Stop here if not JESD216 rev A or later. */
-	if (bfpt_header->length < BFPT_DWORD_MAX)
+	if (bfpt_header->length == BFPT_DWORD_MAX_JESD216)
 		return spi_nor_post_bfpt_fixups(nor, bfpt_header, &bfpt,
 						params);
 
 	/* Page size: this field specifies 'N' so the page size = 2^N bytes. */
-	params->page_size = bfpt.dwords[BFPT_DWORD(11)];
-	params->page_size &= BFPT_DWORD11_PAGE_SIZE_MASK;
-	params->page_size >>= BFPT_DWORD11_PAGE_SIZE_SHIFT;
-	params->page_size = 1U << params->page_size;
+	val = bfpt.dwords[BFPT_DWORD(11)];
+	val &= BFPT_DWORD11_PAGE_SIZE_MASK;
+	val >>= BFPT_DWORD11_PAGE_SIZE_SHIFT;
+	params->page_size = 1U << val;
 
 	/* Quad Enable Requirements. */
 	switch (bfpt.dwords[BFPT_DWORD(15)] & BFPT_DWORD15_QER_MASK) {
@@ -604,6 +601,11 @@ static int spi_nor_parse_bfpt(struct spi_nor *nor,
 		return -EINVAL;
 	}
 
+	/* Stop here if not JESD216 rev C or later. */
+	if (bfpt_header->length == BFPT_DWORD_MAX_JESD216B)
+		return spi_nor_post_bfpt_fixups(nor, bfpt_header, &bfpt,
+						params);
+
 	return spi_nor_post_bfpt_fixups(nor, bfpt_header, &bfpt, params);
 }
 
diff --git a/drivers/mtd/spi-nor/sfdp.h b/drivers/mtd/spi-nor/sfdp.h
index e0a8ded04890..7f9846b3a1ad 100644
--- a/drivers/mtd/spi-nor/sfdp.h
+++ b/drivers/mtd/spi-nor/sfdp.h
@@ -7,14 +7,20 @@
 #ifndef __LINUX_MTD_SFDP_H
 #define __LINUX_MTD_SFDP_H
 
+/* SFDP revisions */
+#define SFDP_JESD216_MAJOR	1
+#define SFDP_JESD216_MINOR	0
+#define SFDP_JESD216A_MINOR	5
+#define SFDP_JESD216B_MINOR	6
+
 /* Basic Flash Parameter Table */
 
 /*
- * JESD216 rev B defines a Basic Flash Parameter Table of 16 DWORDs.
+ * JESD216 rev D defines a Basic Flash Parameter Table of 20 DWORDs.
  * They are indexed from 1 but C arrays are indexed from 0.
  */
 #define BFPT_DWORD(i)		((i) - 1)
-#define BFPT_DWORD_MAX		16
+#define BFPT_DWORD_MAX		20
 
 struct sfdp_bfpt {
 	u32	dwords[BFPT_DWORD_MAX];
@@ -22,6 +28,7 @@ struct sfdp_bfpt {
 
 /* The first version of JESD216 defined only 9 DWORDs. */
 #define BFPT_DWORD_MAX_JESD216			9
+#define BFPT_DWORD_MAX_JESD216B			16
 
 /* 1st DWORD. */
 #define BFPT_DWORD1_FAST_READ_1_1_2		BIT(16)
diff --git a/drivers/mtd/spi-nor/spansion.c b/drivers/mtd/spi-nor/spansion.c
index 6756202ace4b..e550cd5c9d3a 100644
--- a/drivers/mtd/spi-nor/spansion.c
+++ b/drivers/mtd/spi-nor/spansion.c
@@ -8,6 +8,27 @@
 
 #include "core.h"
 
+static int
+s25fs_s_post_bfpt_fixups(struct spi_nor *nor,
+			 const struct sfdp_parameter_header *bfpt_header,
+			 const struct sfdp_bfpt *bfpt,
+			 struct spi_nor_flash_parameter *params)
+{
+	/*
+	 * The S25FS-S chip family reports 512-byte pages in BFPT but
+	 * in reality the write buffer still wraps at the safe default
+	 * of 256 bytes.  Overwrite the page size advertised by BFPT
+	 * to get the writes working.
+	 */
+	params->page_size = 256;
+
+	return 0;
+}
+
+static struct spi_nor_fixups s25fs_s_fixups = {
+	.post_bfpt = s25fs_s_post_bfpt_fixups,
+};
+
 static const struct flash_info spansion_parts[] = {
 	/* Spansion/Cypress -- single (large) sector size only, at least
 	 * for the chips listed here (without boot sectors).
@@ -22,16 +43,27 @@ static const struct flash_info spansion_parts[] = {
 	{ "s25fl128s1", INFO6(0x012018, 0x4d0180, 64 * 1024, 256,
 			      SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
 			      USE_CLSR) },
-	{ "s25fl256s0", INFO(0x010219, 0x4d00, 256 * 1024, 128, USE_CLSR) },
-	{ "s25fl256s1", INFO(0x010219, 0x4d01,  64 * 1024, 512,
-			     SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
-			     USE_CLSR) },
+	{ "s25fl256s0", INFO6(0x010219, 0x4d0080, 256 * 1024, 128,
+			      SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
+			      USE_CLSR) },
+	{ "s25fl256s1", INFO6(0x010219, 0x4d0180, 64 * 1024, 512,
+			      SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
+			      USE_CLSR) },
 	{ "s25fl512s",  INFO6(0x010220, 0x4d0080, 256 * 1024, 256,
 			      SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
 			      SPI_NOR_HAS_LOCK | USE_CLSR) },
-	{ "s25fs512s",  INFO6(0x010220, 0x4d0081, 256 * 1024, 256,
+	{ "s25fs128s1", INFO6(0x012018, 0x4d0181, 64 * 1024, 256,
+			      SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | USE_CLSR)
+	  .fixups = &s25fs_s_fixups, },
+	{ "s25fs256s0", INFO6(0x010219, 0x4d0081, 256 * 1024, 128,
+			      SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
+			      USE_CLSR) },
+	{ "s25fs256s1", INFO6(0x010219, 0x4d0181, 64 * 1024, 512,
 			      SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
 			      USE_CLSR) },
+	{ "s25fs512s",  INFO6(0x010220, 0x4d0081, 256 * 1024, 256,
+			      SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | USE_CLSR)
+	  .fixups = &s25fs_s_fixups, },
 	{ "s70fl01gs",  INFO(0x010221, 0x4d00, 256 * 1024, 256, 0) },
 	{ "s25sl12800", INFO(0x012018, 0x0300, 256 * 1024,  64, 0) },
 	{ "s25sl12801", INFO(0x012018, 0x0301,  64 * 1024, 256, 0) },
@@ -70,6 +102,8 @@ static const struct flash_info spansion_parts[] = {
 	{ "s25fl256l",  INFO(0x016019,      0,  64 * 1024, 512,
 			     SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
 			     SPI_NOR_4B_OPCODES) },
+	{ "cy15x104q",  INFO6(0x042cc2, 0x7f7f7f, 512 * 1024, 1,
+			      SPI_NOR_NO_ERASE) },
 };
 
 static void spansion_post_sfdp_fixups(struct spi_nor *nor)
diff --git a/drivers/mtd/spi-nor/winbond.c b/drivers/mtd/spi-nor/winbond.c
index 17deabad57e1..5062af10f138 100644
--- a/drivers/mtd/spi-nor/winbond.c
+++ b/drivers/mtd/spi-nor/winbond.c
@@ -8,6 +8,31 @@
 
 #include "core.h"
 
+static int
+w25q256_post_bfpt_fixups(struct spi_nor *nor,
+			 const struct sfdp_parameter_header *bfpt_header,
+			 const struct sfdp_bfpt *bfpt,
+			 struct spi_nor_flash_parameter *params)
+{
+	/*
+	 * W25Q256JV supports 4B opcodes but W25Q256FV does not.
+	 * Unfortunately, Winbond has re-used the same JEDEC ID for both
+	 * variants which prevents us from defining a new entry in the parts
+	 * table.
+	 * To differentiate between W25Q256JV and W25Q256FV check SFDP header
+	 * version: only JV has JESD216A compliant structure (version 5).
+	 */
+	if (bfpt_header->major == SFDP_JESD216_MAJOR &&
+	    bfpt_header->minor == SFDP_JESD216A_MINOR)
+		nor->flags |= SNOR_F_4B_OPCODES;
+
+	return 0;
+}
+
+static struct spi_nor_fixups w25q256_fixups = {
+	.post_bfpt = w25q256_post_bfpt_fixups,
+};
+
 static const struct flash_info winbond_parts[] = {
 	/* Winbond -- w25x "blocks" are 64K, "sectors" are 4KiB */
 	{ "w25x05", INFO(0xef3010, 0, 64 * 1024,  1,  SECT_4K) },
@@ -53,8 +78,8 @@ static const struct flash_info winbond_parts[] = {
 	{ "w25q80bl", INFO(0xef4014, 0, 64 * 1024,  16, SECT_4K) },
 	{ "w25q128", INFO(0xef4018, 0, 64 * 1024, 256, SECT_4K) },
 	{ "w25q256", INFO(0xef4019, 0, 64 * 1024, 512,
-			  SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
-			  SPI_NOR_4B_OPCODES) },
+			  SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)
+	  .fixups = &w25q256_fixups },
 	{ "w25q256jvm", INFO(0xef7019, 0, 64 * 1024, 512,
 			     SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
 	{ "w25q256jw", INFO(0xef6019, 0, 64 * 1024, 512,