diff options
| author | Elie De Brauwer <eliedebrauwer@gmail.com> | 2013-09-17 19:48:22 +0200 |
|---|---|---|
| committer | David Woodhouse <David.Woodhouse@intel.com> | 2013-09-27 05:56:22 -0500 |
| commit | 2b468ef0e7959b703626b64c4d264ef822c9267a (patch) | |
| tree | 7f8c4471558965162b2a8626f4fb288441462600 /drivers/mtd | |
| parent | 5cb1327172281cadb7ee8c5fa294d7ac8e09b8db (diff) | |
mtd: m25p80: Fix 4 byte addressing mode for Micron devices.
According to the datasheet for Micron n25q256a (N25Q256A13ESF40F) 4-byte
addressing mode should be entered as follows:
<quote>
To enter or exit the 4-byte address mode, the WRITE ENABLE command
must be executed to set the write enable latch bit to 1. (Note: The
WRITE ENABLE command must NOT be executed on the N25Q256A83ESF40x and
N25Q256A83E1240x devices.) S# must be driven LOW. The effect of the
command is immediate; after the command has been executed, the write
enable latch bit is cleared to 0.
</quote>
Micron's portable way to perform this for all types of Micron flash
is to first issue a write enable, then switch the addressing mode
followed by a write disable to avoid leaving the flash in a write-
able state.
Signed-off-by: Elie De Brauwer <eliedebrauwer@email.com>
[Brian: reworked a bit]
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Diffstat (limited to 'drivers/mtd')
| -rw-r--r-- | drivers/mtd/devices/m25p80.c | 17 |
1 files changed, 15 insertions, 2 deletions
diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c index 26b14f9fcac6..6bc9618af094 100644 --- a/drivers/mtd/devices/m25p80.c +++ b/drivers/mtd/devices/m25p80.c @@ -168,12 +168,25 @@ static inline int write_disable(struct m25p *flash) */ static inline int set_4byte(struct m25p *flash, u32 jedec_id, int enable) { + int status; + bool need_wren = false; + switch (JEDEC_MFR(jedec_id)) { - case CFI_MFR_MACRONIX: case CFI_MFR_ST: /* Micron, actually */ + /* Some Micron need WREN command; all will accept it */ + need_wren = true; + case CFI_MFR_MACRONIX: case 0xEF /* winbond */: + if (need_wren) + write_enable(flash); + flash->command[0] = enable ? OPCODE_EN4B : OPCODE_EX4B; - return spi_write(flash->spi, flash->command, 1); + status = spi_write(flash->spi, flash->command, 1); + + if (need_wren) + write_disable(flash); + + return status; default: /* Spansion style */ flash->command[0] = OPCODE_BRWR; |