Merge tag 'mtd/for-4.20' of git://git.infradead.org/linux-mtd

Pull mtd updates from Boris Brezillon:
 "SPI NOR core changes:
   - Support non-uniform erase size
   - Support controllers with limited TX fifo size

 Driver changes:
   - m25p80: Re-issue a WREN command after each write access
   - cadence: Pass a proper dir value to dma_[un]map_single()
   - fsl-qspi: Check fsl_qspi_get_seqid() return val make sure 4B
     addressing opcodes are properly handled
   - intel-spi: Add a new PCI entry for Ice Lake

 Raw NAND core changes:
   - Two batchs of cleanups of the NAND API, including:
      * Deprecating a lot of interfaces (now replaced by ->exec_op()).
      * Moving code in separate drivers (JEDEC, ONFI), in private files
        (internals), in platform drivers, etc.
      * Functions/structures reordering.
      * Exclusive use of the nand_chip structure instead of the MTD one
        all across the subsystem.
   - Addition of the nand_wait_readrdy/rdy_op() helpers.

 Raw NAND controllers drivers changes:
   - Various coccinelle patches.
   - Marvell:
      * Use regmap_update_bits() for syscon access.
      * More documentation.
      * BCH failure path rework.
      * More layouts to be supported.
      * IRQ handler complete() condition fixed.
   - Fsl_ifc:
      * SRAM initialization fixed for newer controller versions.
   - Denali:
      * Fix licenses mismatch and use a SPDX tag.
      * Set SPARE_AREA_SKIP_BYTES register to 8 if unset.
   - Qualcomm:
      * Do not include dma-direct.h.
   - Docg4:
      * Removed.
   - Ams-delta:
      * Use of a GPIO lookup table
      * Internal machinery changes.

 Raw NAND chip drivers changes:
   - Toshiba:
      * Add support for Toshiba memory BENAND
      * Pass a single nand_chip object to the status helper.
   - ESMT:
      * New driver to retrieve the ECC requirements from the 5th ID
        byte.

  MTD changes:
   - physmap cleanups/fixe
   - gpio-addr-flash cleanups/fixes"

* tag 'mtd/for-4.20' of git://git.infradead.org/linux-mtd: (93 commits)
  jffs2: free jffs2_sb_info through jffs2_kill_sb()
  mtd: spi-nor: fsl-quadspi: fix read error for flash size larger than 16MB
  mtd: spi-nor: intel-spi: Add support for Intel Ice Lake SPI serial flash
  mtd: maps: gpio-addr-flash: Convert to gpiod
  mtd: maps: gpio-addr-flash: Replace array with an integer
  mtd: maps: gpio-addr-flash: Use order instead of size
  mtd: spi-nor: fsl-quadspi: Don't let -EINVAL on the bus
  mtd: devices: m25p80: Make sure WRITE_EN is issued before each write
  mtd: spi-nor: Support controllers with limited TX FIFO size
  mtd: spi-nor: cadence-quadspi: Use proper enum for dma_[un]map_single
  mtd: spi-nor: parse SFDP Sector Map Parameter Table
  mtd: spi-nor: add support to non-uniform SFDP SPI NOR flash memories
  mtd: rawnand: marvell: fix the IRQ handler complete() condition
  mtd: rawnand: denali: set SPARE_AREA_SKIP_BYTES register to 8 if unset
  mtd: rawnand: r852: fix spelling mistake "card_registred" -> "card_registered"
  mtd: rawnand: toshiba: Pass a single nand_chip object to the status helper
  mtd: maps: gpio-addr-flash: Use devm_* functions
  mtd: maps: gpio-addr-flash: Fix ioremapped size
  mtd: maps: gpio-addr-flash: Replace custom printk
  mtd: physmap_of: Release resources on error
  ...

1 files changed, 8 insertions, 15 deletions

diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c
index 270d3c9580c5..c4a1d04b8c80 100644
--- a/drivers/mtd/devices/m25p80.c
+++ b/drivers/mtd/devices/m25p80.c
@@ -90,7 +90,6 @@ static ssize_t m25p80_write(struct spi_nor *nor, loff_t to, size_t len,
 				   SPI_MEM_OP_ADDR(nor->addr_width, to, 1),
 				   SPI_MEM_OP_NO_DUMMY,
 				   SPI_MEM_OP_DATA_OUT(len, buf, 1));
-	size_t remaining = len;
 	int ret;
 
 	/* get transfer protocols. */
@@ -101,22 +100,16 @@ static ssize_t m25p80_write(struct spi_nor *nor, loff_t to, size_t len,
 	if (nor->program_opcode == SPINOR_OP_AAI_WP && nor->sst_write_second)
 		op.addr.nbytes = 0;
 
-	while (remaining) {
-		op.data.nbytes = remaining < UINT_MAX ? remaining : UINT_MAX;
-		ret = spi_mem_adjust_op_size(flash->spimem, &op);
-		if (ret)
-			return ret;
-
-		ret = spi_mem_exec_op(flash->spimem, &op);
-		if (ret)
-			return ret;
+	ret = spi_mem_adjust_op_size(flash->spimem, &op);
+	if (ret)
+		return ret;
+	op.data.nbytes = len < op.data.nbytes ? len : op.data.nbytes;
 
-		op.addr.val += op.data.nbytes;
-		remaining -= op.data.nbytes;
-		op.data.buf.out += op.data.nbytes;
-	}
+	ret = spi_mem_exec_op(flash->spimem, &op);
+	if (ret)
+		return ret;
 
-	return len;
+	return op.data.nbytes;
 }
 
 /*