diff options
author | Jan Glauber <jglauber@cavium.com> | 2017-03-30 17:31:25 +0200 |
---|---|---|
committer | Ulf Hansson <ulf.hansson@linaro.org> | 2017-04-24 21:42:09 +0200 |
commit | 166bac38c3c569508e695aca99fdc2def2ae2198 (patch) | |
tree | 564c6445a0077a55bfb4a5158b85e65e6797beb3 /drivers/mmc | |
parent | ba3869ff32e4a671b0f9baa73900f9e2bfeb0414 (diff) |
mmc: cavium: Add MMC PCI driver for ThunderX SOCs
Add a platform driver for ThunderX ARM SOCs.
Signed-off-by: Jan Glauber <jglauber@cavium.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Diffstat (limited to 'drivers/mmc')
-rw-r--r-- | drivers/mmc/host/Kconfig | 11 | ||||
-rw-r--r-- | drivers/mmc/host/Makefile | 2 | ||||
-rw-r--r-- | drivers/mmc/host/cavium-thunderx.c | 195 | ||||
-rw-r--r-- | drivers/mmc/host/cavium.h | 7 |
4 files changed, 215 insertions, 0 deletions
diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig index a638cd0d80be..7736a93386f7 100644 --- a/drivers/mmc/host/Kconfig +++ b/drivers/mmc/host/Kconfig @@ -622,6 +622,17 @@ config SDH_BFIN_MISSING_CMD_PULLUP_WORKAROUND help If you say yes here SD-Cards may work on the EZkit. +config MMC_CAVIUM_THUNDERX + tristate "Cavium ThunderX SD/MMC Card Interface support" + depends on PCI && 64BIT && (ARM64 || COMPILE_TEST) + depends on GPIOLIB + depends on OF_ADDRESS + help + This selects Cavium ThunderX SD/MMC Card Interface. + If you have an Cavium ARM64 board with a Multimedia Card slot + or builtin eMMC chip say Y or M here. If built as a module + the module will be called thunderx_mmc.ko. + config MMC_DW tristate "Synopsys DesignWare Memory Card Interface" depends on HAS_DMA diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile index bc2c2e2c68c0..ec78296ef053 100644 --- a/drivers/mmc/host/Makefile +++ b/drivers/mmc/host/Makefile @@ -42,6 +42,8 @@ obj-$(CONFIG_MMC_SDHI) += sh_mobile_sdhi.o obj-$(CONFIG_MMC_CB710) += cb710-mmc.o obj-$(CONFIG_MMC_VIA_SDMMC) += via-sdmmc.o obj-$(CONFIG_SDH_BFIN) += bfin_sdh.o +thunderx-mmc-objs := cavium.o cavium-thunderx.o +obj-$(CONFIG_MMC_CAVIUM_THUNDERX) += thunderx-mmc.o obj-$(CONFIG_MMC_DW) += dw_mmc.o obj-$(CONFIG_MMC_DW_PLTFM) += dw_mmc-pltfm.o obj-$(CONFIG_MMC_DW_EXYNOS) += dw_mmc-exynos.o diff --git a/drivers/mmc/host/cavium-thunderx.c b/drivers/mmc/host/cavium-thunderx.c new file mode 100644 index 000000000000..cba108b72bac --- /dev/null +++ b/drivers/mmc/host/cavium-thunderx.c @@ -0,0 +1,195 @@ +/* + * Driver for MMC and SSD cards for Cavium ThunderX SOCs. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2016 Cavium Inc. + */ +#include <linux/dma-mapping.h> +#include <linux/interrupt.h> +#include <linux/mmc/mmc.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_platform.h> +#include <linux/pci.h> +#include "cavium.h" + +static void thunder_mmc_acquire_bus(struct cvm_mmc_host *host) +{ + down(&host->mmc_serializer); +} + +static void thunder_mmc_release_bus(struct cvm_mmc_host *host) +{ + up(&host->mmc_serializer); +} + +static void thunder_mmc_int_enable(struct cvm_mmc_host *host, u64 val) +{ + writeq(val, host->base + MIO_EMM_INT(host)); + writeq(val, host->base + MIO_EMM_INT_EN_SET(host)); +} + +static int thunder_mmc_register_interrupts(struct cvm_mmc_host *host, + struct pci_dev *pdev) +{ + int nvec, ret, i; + + nvec = pci_alloc_irq_vectors(pdev, 1, 9, PCI_IRQ_MSIX); + if (nvec < 0) + return nvec; + + /* register interrupts */ + for (i = 0; i < nvec; i++) { + ret = devm_request_irq(&pdev->dev, pci_irq_vector(pdev, i), + cvm_mmc_interrupt, + 0, cvm_mmc_irq_names[i], host); + if (ret) + return ret; + } + return 0; +} + +static int thunder_mmc_probe(struct pci_dev *pdev, + const struct pci_device_id *id) +{ + struct device_node *node = pdev->dev.of_node; + struct device *dev = &pdev->dev; + struct device_node *child_node; + struct cvm_mmc_host *host; + int ret, i = 0; + + host = devm_kzalloc(dev, sizeof(*host), GFP_KERNEL); + if (!host) + return -ENOMEM; + + pci_set_drvdata(pdev, host); + ret = pcim_enable_device(pdev); + if (ret) + return ret; + + ret = pci_request_regions(pdev, KBUILD_MODNAME); + if (ret) + return ret; + + host->base = pcim_iomap(pdev, 0, pci_resource_len(pdev, 0)); + if (!host->base) + return -EINVAL; + + /* On ThunderX these are identical */ + host->dma_base = host->base; + + host->reg_off = 0x2000; + host->reg_off_dma = 0x180; + + host->clk = devm_clk_get(dev, NULL); + if (IS_ERR(host->clk)) + return PTR_ERR(host->clk); + + ret = clk_prepare_enable(host->clk); + if (ret) + return ret; + host->sys_freq = clk_get_rate(host->clk); + + spin_lock_init(&host->irq_handler_lock); + sema_init(&host->mmc_serializer, 1); + + host->dev = dev; + host->acquire_bus = thunder_mmc_acquire_bus; + host->release_bus = thunder_mmc_release_bus; + host->int_enable = thunder_mmc_int_enable; + + host->big_dma_addr = true; + host->need_irq_handler_lock = true; + host->last_slot = -1; + + ret = dma_set_mask(dev, DMA_BIT_MASK(48)); + if (ret) + goto error; + + /* + * Clear out any pending interrupts that may be left over from + * bootloader. Writing 1 to the bits clears them. + */ + writeq(127, host->base + MIO_EMM_INT_EN(host)); + writeq(3, host->base + MIO_EMM_DMA_INT_ENA_W1C(host)); + + ret = thunder_mmc_register_interrupts(host, pdev); + if (ret) + goto error; + + for_each_child_of_node(node, child_node) { + /* + * mmc_of_parse and devm* require one device per slot. + * Create a dummy device per slot and set the node pointer to + * the slot. The easiest way to get this is using + * of_platform_device_create. + */ + if (of_device_is_compatible(child_node, "mmc-slot")) { + host->slot_pdev[i] = of_platform_device_create(child_node, NULL, + &pdev->dev); + if (!host->slot_pdev[i]) + continue; + + ret = cvm_mmc_of_slot_probe(&host->slot_pdev[i]->dev, host); + if (ret) + goto error; + } + i++; + } + dev_info(dev, "probed\n"); + return 0; + +error: + clk_disable_unprepare(host->clk); + return ret; +} + +static void thunder_mmc_remove(struct pci_dev *pdev) +{ + struct cvm_mmc_host *host = pci_get_drvdata(pdev); + u64 dma_cfg; + int i; + + for (i = 0; i < CAVIUM_MAX_MMC; i++) + if (host->slot[i]) + cvm_mmc_of_slot_remove(host->slot[i]); + + dma_cfg = readq(host->dma_base + MIO_EMM_DMA_CFG(host)); + dma_cfg &= ~MIO_EMM_DMA_CFG_EN; + writeq(dma_cfg, host->dma_base + MIO_EMM_DMA_CFG(host)); + + clk_disable_unprepare(host->clk); +} + +static const struct pci_device_id thunder_mmc_id_table[] = { + { PCI_DEVICE(PCI_VENDOR_ID_CAVIUM, 0xa010) }, + { 0, } /* end of table */ +}; + +static struct pci_driver thunder_mmc_driver = { + .name = KBUILD_MODNAME, + .id_table = thunder_mmc_id_table, + .probe = thunder_mmc_probe, + .remove = thunder_mmc_remove, +}; + +static int __init thunder_mmc_init_module(void) +{ + return pci_register_driver(&thunder_mmc_driver); +} + +static void __exit thunder_mmc_exit_module(void) +{ + pci_unregister_driver(&thunder_mmc_driver); +} + +module_init(thunder_mmc_init_module); +module_exit(thunder_mmc_exit_module); + +MODULE_AUTHOR("Cavium Inc."); +MODULE_DESCRIPTION("Cavium ThunderX eMMC Driver"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, thunder_mmc_id_table); diff --git a/drivers/mmc/host/cavium.h b/drivers/mmc/host/cavium.h index f5d2b6156005..66eec210b945 100644 --- a/drivers/mmc/host/cavium.h +++ b/drivers/mmc/host/cavium.h @@ -24,6 +24,11 @@ /* DMA register addresses */ #define MIO_EMM_DMA_CFG(x) (0x00 + x->reg_off_dma) +#define MIO_EMM_DMA_ADR(x) (0x08 + x->reg_off_dma) +#define MIO_EMM_DMA_INT(x) (0x10 + x->reg_off_dma) +#define MIO_EMM_DMA_INT_W1S(x) (0x18 + x->reg_off_dma) +#define MIO_EMM_DMA_INT_ENA_W1S(x) (0x20 + x->reg_off_dma) +#define MIO_EMM_DMA_INT_ENA_W1C(x) (0x28 + x->reg_off_dma) /* register addresses */ #define MIO_EMM_CFG(x) (0x00 + x->reg_off) @@ -39,6 +44,8 @@ #define MIO_EMM_SAMPLE(x) (0x90 + x->reg_off) #define MIO_EMM_STS_MASK(x) (0x98 + x->reg_off) #define MIO_EMM_RCA(x) (0xa0 + x->reg_off) +#define MIO_EMM_INT_EN_SET(x) (0xb0 + x->reg_off) +#define MIO_EMM_INT_EN_CLR(x) (0xb8 + x->reg_off) #define MIO_EMM_BUF_IDX(x) (0xe0 + x->reg_off) #define MIO_EMM_BUF_DAT(x) (0xe8 + x->reg_off) |