Staging: mei: move the mei code out of staging

It's been cleaned up, and there's nothing else left to do, so move it
out of staging into drivers/misc/ where all can use it now.

Cc: Tomas Winkler <tomas.winkler@intel.com>
Cc: Oren Weil <oren.jer.weil@intel.com>
Cc: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

1 files changed, 379 insertions, 0 deletions

diff --git a/drivers/misc/mei/wd.c b/drivers/misc/mei/wd.c
new file mode 100644
index 000000000000..1e6285127e95
--- /dev/null
+++ b/drivers/misc/mei/wd.c
@@ -0,0 +1,379 @@
+/*
+ *
+ * Intel Management Engine Interface (Intel MEI) Linux driver
+ * Copyright (c) 2003-2012, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/device.h>
+#include <linux/pci.h>
+#include <linux/sched.h>
+#include <linux/watchdog.h>
+
+#include "mei_dev.h"
+#include "hw.h"
+#include "interface.h"
+#include "mei.h"
+
+static const u8 mei_start_wd_params[] = { 0x02, 0x12, 0x13, 0x10 };
+static const u8 mei_stop_wd_params[] = { 0x02, 0x02, 0x14, 0x10 };
+
+const u8 mei_wd_state_independence_msg[3][4] = {
+	{0x05, 0x02, 0x51, 0x10},
+	{0x05, 0x02, 0x52, 0x10},
+	{0x07, 0x02, 0x01, 0x10}
+};
+
+/*
+ * AMT Watchdog Device
+ */
+#define INTEL_AMT_WATCHDOG_ID "INTCAMT"
+
+/* UUIDs for AMT F/W clients */
+const uuid_le mei_wd_guid = UUID_LE(0x05B79A6F, 0x4628, 0x4D7F, 0x89,
+						0x9D, 0xA9, 0x15, 0x14, 0xCB,
+						0x32, 0xAB);
+
+static void mei_wd_set_start_timeout(struct mei_device *dev, u16 timeout)
+{
+	dev_dbg(&dev->pdev->dev, "wd: set timeout=%d.\n", timeout);
+	memcpy(dev->wd_data, mei_start_wd_params, MEI_WD_PARAMS_SIZE);
+	memcpy(dev->wd_data + MEI_WD_PARAMS_SIZE, &timeout, sizeof(u16));
+}
+
+/**
+ * host_init_wd - mei initialization wd.
+ *
+ * @dev: the device structure
+ * returns -ENENT if wd client cannot be found
+ *         -EIO if write has failed
+ */
+int mei_wd_host_init(struct mei_device *dev)
+{
+	mei_cl_init(&dev->wd_cl, dev);
+
+	/* look for WD client and connect to it */
+	dev->wd_cl.state = MEI_FILE_DISCONNECTED;
+	dev->wd_timeout = AMT_WD_DEFAULT_TIMEOUT;
+
+	/* find ME WD client */
+	mei_find_me_client_update_filext(dev, &dev->wd_cl,
+				&mei_wd_guid, MEI_WD_HOST_CLIENT_ID);
+
+	dev_dbg(&dev->pdev->dev, "wd: check client\n");
+	if (MEI_FILE_CONNECTING != dev->wd_cl.state) {
+		dev_info(&dev->pdev->dev, "wd: failed to find the client\n");
+		return -ENOENT;
+	}
+
+	if (mei_connect(dev, &dev->wd_cl)) {
+		dev_err(&dev->pdev->dev, "wd: failed to connect to the client\n");
+		dev->wd_cl.state = MEI_FILE_DISCONNECTED;
+		dev->wd_cl.host_client_id = 0;
+		return -EIO;
+	}
+	dev->wd_cl.timer_count = CONNECT_TIMEOUT;
+
+	return 0;
+}
+
+/**
+ * mei_wd_send - sends watch dog message to fw.
+ *
+ * @dev: the device structure
+ *
+ * returns 0 if success,
+ *	-EIO when message send fails
+ *	-EINVAL when invalid message is to be sent
+ */
+int mei_wd_send(struct mei_device *dev)
+{
+	struct mei_msg_hdr *mei_hdr;
+
+	mei_hdr = (struct mei_msg_hdr *) &dev->wr_msg_buf[0];
+	mei_hdr->host_addr = dev->wd_cl.host_client_id;
+	mei_hdr->me_addr = dev->wd_cl.me_client_id;
+	mei_hdr->msg_complete = 1;
+	mei_hdr->reserved = 0;
+
+	if (!memcmp(dev->wd_data, mei_start_wd_params, MEI_WD_PARAMS_SIZE))
+		mei_hdr->length = MEI_START_WD_DATA_SIZE;
+	else if (!memcmp(dev->wd_data, mei_stop_wd_params, MEI_WD_PARAMS_SIZE))
+		mei_hdr->length = MEI_WD_PARAMS_SIZE;
+	else
+		return -EINVAL;
+
+	return mei_write_message(dev, mei_hdr, dev->wd_data, mei_hdr->length);
+}
+
+/**
+ * mei_wd_stop - sends watchdog stop message to fw.
+ *
+ * @dev: the device structure
+ * @preserve: indicate if to keep the timeout value
+ *
+ * returns 0 if success,
+ *	-EIO when message send fails
+ *	-EINVAL when invalid message is to be sent
+ */
+int mei_wd_stop(struct mei_device *dev, bool preserve)
+{
+	int ret;
+	u16 wd_timeout = dev->wd_timeout;
+
+	cancel_delayed_work(&dev->timer_work);
+	if (dev->wd_cl.state != MEI_FILE_CONNECTED || !dev->wd_timeout)
+		return 0;
+
+	dev->wd_timeout = 0;
+	dev->wd_due_counter = 0;
+	memcpy(dev->wd_data, mei_stop_wd_params, MEI_WD_PARAMS_SIZE);
+	dev->stop = true;
+
+	ret = mei_flow_ctrl_creds(dev, &dev->wd_cl);
+	if (ret < 0)
+		goto out;
+
+	if (ret && dev->mei_host_buffer_is_empty) {
+		ret = 0;
+		dev->mei_host_buffer_is_empty = false;
+
+		if (!mei_wd_send(dev)) {
+			ret = mei_flow_ctrl_reduce(dev, &dev->wd_cl);
+			if (ret)
+				goto out;
+		} else {
+			dev_err(&dev->pdev->dev, "wd: send stop failed\n");
+		}
+
+		dev->wd_pending = false;
+	} else {
+		dev->wd_pending = true;
+	}
+	dev->wd_stopped = false;
+	mutex_unlock(&dev->device_lock);
+
+	ret = wait_event_interruptible_timeout(dev->wait_stop_wd,
+					dev->wd_stopped, 10 * HZ);
+	mutex_lock(&dev->device_lock);
+	if (dev->wd_stopped) {
+		dev_dbg(&dev->pdev->dev, "wd: stop completed ret=%d.\n", ret);
+		ret = 0;
+	} else {
+		if (!ret)
+			ret = -ETIMEDOUT;
+		dev_warn(&dev->pdev->dev,
+			"wd: stop failed to complete ret=%d.\n", ret);
+	}
+
+	if (preserve)
+		dev->wd_timeout = wd_timeout;
+
+out:
+	return ret;
+}
+
+/*
+ * mei_wd_ops_start - wd start command from the watchdog core.
+ *
+ * @wd_dev - watchdog device struct
+ *
+ * returns 0 if success, negative errno code for failure
+ */
+static int mei_wd_ops_start(struct watchdog_device *wd_dev)
+{
+	int err = -ENODEV;
+	struct mei_device *dev;
+
+	dev = pci_get_drvdata(mei_device);
+	if (!dev)
+		return -ENODEV;
+
+	mutex_lock(&dev->device_lock);
+
+	if (dev->mei_state != MEI_ENABLED) {
+		dev_dbg(&dev->pdev->dev,
+			"wd: mei_state != MEI_ENABLED  mei_state = %d\n",
+			dev->mei_state);
+		goto end_unlock;
+	}
+
+	if (dev->wd_cl.state != MEI_FILE_CONNECTED)	{
+		dev_dbg(&dev->pdev->dev,
+			"MEI Driver is not connected to Watchdog Client\n");
+		goto end_unlock;
+	}
+
+	mei_wd_set_start_timeout(dev, dev->wd_timeout);
+
+	err = 0;
+end_unlock:
+	mutex_unlock(&dev->device_lock);
+	return err;
+}
+
+/*
+ * mei_wd_ops_stop -  wd stop command from the watchdog core.
+ *
+ * @wd_dev - watchdog device struct
+ *
+ * returns 0 if success, negative errno code for failure
+ */
+static int mei_wd_ops_stop(struct watchdog_device *wd_dev)
+{
+	struct mei_device *dev;
+	dev = pci_get_drvdata(mei_device);
+
+	if (!dev)
+		return -ENODEV;
+
+	mutex_lock(&dev->device_lock);
+	mei_wd_stop(dev, false);
+	mutex_unlock(&dev->device_lock);
+
+	return 0;
+}
+
+/*
+ * mei_wd_ops_ping - wd ping command from the watchdog core.
+ *
+ * @wd_dev - watchdog device struct
+ *
+ * returns 0 if success, negative errno code for failure
+ */
+static int mei_wd_ops_ping(struct watchdog_device *wd_dev)
+{
+	int ret = 0;
+	struct mei_device *dev;
+	dev = pci_get_drvdata(mei_device);
+
+	if (!dev)
+		return -ENODEV;
+
+	mutex_lock(&dev->device_lock);
+
+	if (dev->wd_cl.state != MEI_FILE_CONNECTED) {
+		dev_err(&dev->pdev->dev, "wd: not connected.\n");
+		ret = -ENODEV;
+		goto end;
+	}
+
+	/* Check if we can send the ping to HW*/
+	if (dev->mei_host_buffer_is_empty &&
+		mei_flow_ctrl_creds(dev, &dev->wd_cl) > 0) {
+
+		dev->mei_host_buffer_is_empty = false;
+		dev_dbg(&dev->pdev->dev, "wd: sending ping\n");
+
+		if (mei_wd_send(dev)) {
+			dev_err(&dev->pdev->dev, "wd: send failed.\n");
+			ret = -EIO;
+			goto end;
+		}
+
+		if (mei_flow_ctrl_reduce(dev, &dev->wd_cl)) {
+			dev_err(&dev->pdev->dev,
+				"wd: mei_flow_ctrl_reduce() failed.\n");
+			ret = -EIO;
+			goto end;
+		}
+
+	} else {
+		dev->wd_pending = true;
+	}
+
+end:
+	mutex_unlock(&dev->device_lock);
+	return ret;
+}
+
+/*
+ * mei_wd_ops_set_timeout - wd set timeout command from the watchdog core.
+ *
+ * @wd_dev - watchdog device struct
+ * @timeout - timeout value to set
+ *
+ * returns 0 if success, negative errno code for failure
+ */
+static int mei_wd_ops_set_timeout(struct watchdog_device *wd_dev, unsigned int timeout)
+{
+	struct mei_device *dev;
+	dev = pci_get_drvdata(mei_device);
+
+	if (!dev)
+		return -ENODEV;
+
+	/* Check Timeout value */
+	if (timeout < AMT_WD_MIN_TIMEOUT || timeout > AMT_WD_MAX_TIMEOUT)
+		return -EINVAL;
+
+	mutex_lock(&dev->device_lock);
+
+	dev->wd_timeout = timeout;
+	wd_dev->timeout = timeout;
+	mei_wd_set_start_timeout(dev, dev->wd_timeout);
+
+	mutex_unlock(&dev->device_lock);
+
+	return 0;
+}
+
+/*
+ * Watchdog Device structs
+ */
+static const struct watchdog_ops wd_ops = {
+		.owner = THIS_MODULE,
+		.start = mei_wd_ops_start,
+		.stop = mei_wd_ops_stop,
+		.ping = mei_wd_ops_ping,
+		.set_timeout = mei_wd_ops_set_timeout,
+};
+static const struct watchdog_info wd_info = {
+		.identity = INTEL_AMT_WATCHDOG_ID,
+		.options = WDIOF_KEEPALIVEPING,
+};
+
+static struct watchdog_device amt_wd_dev = {
+		.info = &wd_info,
+		.ops = &wd_ops,
+		.timeout = AMT_WD_DEFAULT_TIMEOUT,
+		.min_timeout = AMT_WD_MIN_TIMEOUT,
+		.max_timeout = AMT_WD_MAX_TIMEOUT,
+};
+
+
+void  mei_watchdog_register(struct mei_device *dev)
+{
+	dev_dbg(&dev->pdev->dev, "dev->wd_timeout =%d.\n", dev->wd_timeout);
+
+	dev->wd_due_counter = !!dev->wd_timeout;
+
+	if (watchdog_register_device(&amt_wd_dev)) {
+		dev_err(&dev->pdev->dev,
+			"wd: unable to register watchdog device.\n");
+		dev->wd_interface_reg = false;
+	} else {
+		dev_dbg(&dev->pdev->dev,
+			"wd: successfully register watchdog interface.\n");
+		dev->wd_interface_reg = true;
+	}
+}
+
+void mei_watchdog_unregister(struct mei_device *dev)
+{
+	if (dev->wd_interface_reg)
+		watchdog_unregister_device(&amt_wd_dev);
+	dev->wd_interface_reg = false;
+}
+