Merge tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull more ARM SoC updates from Olof Johansson:
 "A few updates that we merged late but are low risk for regressions for
  other platforms (and a few other straggling patches):

   - I mis-tagged the 'drivers' branch, and missed 3 patches. Merged in
     here. They're for a driver for the PL353 SRAM controller and a
     build fix for the qualcomm scm driver.

   - A new platform, RDA Micro RDA8810PL (Cortex-A5 w/ integrated
     Vivante GPU, 256MB RAM, Wifi). This includes some acked
     platform-specific drivers (serial, etc). This also include DTs for
     two boards with this SoC, OrangePi 2G and OrangePi i86.

   - i.MX8 is another new platform (NXP, 4x Cortex-A53 + Cortex-M4, 4K
     video playback offload). This is the first i.MX 64-bit SoC.

   - Some minor updates to Samsung boards (adding a few peripherals in
     DTs).

   - Small rework for SMP bootup on STi platforms.

   - A couple of TEE driver fixes.

   - A couple of new config options (bcm2835 thermal, Uniphier MDMAC)
     enabled in defconfigs"

* tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (27 commits)
  ARM: multi_v7_defconfig: enable CONFIG_UNIPHIER_MDMAC
  arm64: defconfig: Re-enable bcm2835-thermal driver
  MAINTAINERS: Add entry for RDA Micro SoC architecture
  tty: serial: Add RDA8810PL UART driver
  ARM: dts: rda8810pl: Add interrupt support for UART
  dt-bindings: serial: Document RDA Micro UART
  ARM: dts: rda8810pl: Add timer support
  ARM: dts: Add devicetree for OrangePi i96 board
  ARM: dts: Add devicetree for OrangePi 2G IoT board
  ARM: dts: Add devicetree for RDA8810PL SoC
  ARM: Prepare RDA8810PL SoC
  dt-bindings: arm: Document RDA8810PL and reference boards
  dt-bindings: Add RDA Micro vendor prefix
  ARM: sti: remove pen_release and boot_lock
  arm64: dts: exynos: Add Bluetooth chip to TM2(e) boards
  arm64: dts: imx8mq-evk: enable watchdog
  arm64: dts: imx8mq: add watchdog devices
  MAINTAINERS: add i.MX8 DT path to i.MX architecture
  arm64: add support for i.MX8M EVK board
  arm64: add basic DTS for i.MX8MQ
  ...

3 files changed, 473 insertions, 0 deletions

diff --git a/drivers/memory/Kconfig b/drivers/memory/Kconfig
index 63389f075f1d..2d91b00e3591 100644
--- a/drivers/memory/Kconfig
+++ b/drivers/memory/Kconfig
@@ -145,6 +145,15 @@ config DA8XX_DDRCTL
 	  Texas Instruments da8xx SoCs. It's used to tweak various memory
 	  controller configuration options.
 
+config PL353_SMC
+	tristate "ARM PL35X Static Memory Controller(SMC) driver"
+	default y
+	depends on ARM
+	depends on ARM_AMBA
+	help
+	  This driver is for the ARM PL351/PL353 Static Memory
+	  Controller(SMC) module.
+
 source "drivers/memory/samsung/Kconfig"
 source "drivers/memory/tegra/Kconfig"
 
diff --git a/drivers/memory/Makefile b/drivers/memory/Makefile
index a01ab3e22f94..90161dec6fa5 100644
--- a/drivers/memory/Makefile
+++ b/drivers/memory/Makefile
@@ -19,6 +19,7 @@ obj-$(CONFIG_MVEBU_DEVBUS)	+= mvebu-devbus.o
 obj-$(CONFIG_JZ4780_NEMC)	+= jz4780-nemc.o
 obj-$(CONFIG_MTK_SMI)		+= mtk-smi.o
 obj-$(CONFIG_DA8XX_DDRCTL)	+= da8xx-ddrctl.o
+obj-$(CONFIG_PL353_SMC)		+= pl353-smc.o
 
 obj-$(CONFIG_SAMSUNG_MC)	+= samsung/
 obj-$(CONFIG_TEGRA_MC)		+= tegra/
diff --git a/drivers/memory/pl353-smc.c b/drivers/memory/pl353-smc.c
new file mode 100644
index 000000000000..73bd3023202f
--- /dev/null
+++ b/drivers/memory/pl353-smc.c
@@ -0,0 +1,463 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * ARM PL353 SMC driver
+ *
+ * Copyright (C) 2012 - 2018 Xilinx, Inc
+ * Author: Punnaiah Choudary Kalluri <punnaiah@xilinx.com>
+ * Author: Naga Sureshkumar Relli <nagasure@xilinx.com>
+ */
+
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/pl353-smc.h>
+#include <linux/amba/bus.h>
+
+/* Register definitions */
+#define PL353_SMC_MEMC_STATUS_OFFS	0	/* Controller status reg, RO */
+#define PL353_SMC_CFG_CLR_OFFS		0xC	/* Clear config reg, WO */
+#define PL353_SMC_DIRECT_CMD_OFFS	0x10	/* Direct command reg, WO */
+#define PL353_SMC_SET_CYCLES_OFFS	0x14	/* Set cycles register, WO */
+#define PL353_SMC_SET_OPMODE_OFFS	0x18	/* Set opmode register, WO */
+#define PL353_SMC_ECC_STATUS_OFFS	0x400	/* ECC status register */
+#define PL353_SMC_ECC_MEMCFG_OFFS	0x404	/* ECC mem config reg */
+#define PL353_SMC_ECC_MEMCMD1_OFFS	0x408	/* ECC mem cmd1 reg */
+#define PL353_SMC_ECC_MEMCMD2_OFFS	0x40C	/* ECC mem cmd2 reg */
+#define PL353_SMC_ECC_VALUE0_OFFS	0x418	/* ECC value 0 reg */
+
+/* Controller status register specific constants */
+#define PL353_SMC_MEMC_STATUS_RAW_INT_1_SHIFT	6
+
+/* Clear configuration register specific constants */
+#define PL353_SMC_CFG_CLR_INT_CLR_1	0x10
+#define PL353_SMC_CFG_CLR_ECC_INT_DIS_1	0x40
+#define PL353_SMC_CFG_CLR_INT_DIS_1	0x2
+#define PL353_SMC_CFG_CLR_DEFAULT_MASK	(PL353_SMC_CFG_CLR_INT_CLR_1 | \
+					 PL353_SMC_CFG_CLR_ECC_INT_DIS_1 | \
+					 PL353_SMC_CFG_CLR_INT_DIS_1)
+
+/* Set cycles register specific constants */
+#define PL353_SMC_SET_CYCLES_T0_MASK	0xF
+#define PL353_SMC_SET_CYCLES_T0_SHIFT	0
+#define PL353_SMC_SET_CYCLES_T1_MASK	0xF
+#define PL353_SMC_SET_CYCLES_T1_SHIFT	4
+#define PL353_SMC_SET_CYCLES_T2_MASK	0x7
+#define PL353_SMC_SET_CYCLES_T2_SHIFT	8
+#define PL353_SMC_SET_CYCLES_T3_MASK	0x7
+#define PL353_SMC_SET_CYCLES_T3_SHIFT	11
+#define PL353_SMC_SET_CYCLES_T4_MASK	0x7
+#define PL353_SMC_SET_CYCLES_T4_SHIFT	14
+#define PL353_SMC_SET_CYCLES_T5_MASK	0x7
+#define PL353_SMC_SET_CYCLES_T5_SHIFT	17
+#define PL353_SMC_SET_CYCLES_T6_MASK	0xF
+#define PL353_SMC_SET_CYCLES_T6_SHIFT	20
+
+/* ECC status register specific constants */
+#define PL353_SMC_ECC_STATUS_BUSY	BIT(6)
+#define PL353_SMC_ECC_REG_SIZE_OFFS	4
+
+/* ECC memory config register specific constants */
+#define PL353_SMC_ECC_MEMCFG_MODE_MASK	0xC
+#define PL353_SMC_ECC_MEMCFG_MODE_SHIFT	2
+#define PL353_SMC_ECC_MEMCFG_PGSIZE_MASK	0xC
+
+#define PL353_SMC_DC_UPT_NAND_REGS	((4 << 23) |	/* CS: NAND chip */ \
+				 (2 << 21))	/* UpdateRegs operation */
+
+#define PL353_NAND_ECC_CMD1	((0x80)       |	/* Write command */ \
+				 (0 << 8)     |	/* Read command */ \
+				 (0x30 << 16) |	/* Read End command */ \
+				 (1 << 24))	/* Read End command calid */
+
+#define PL353_NAND_ECC_CMD2	((0x85)	      |	/* Write col change cmd */ \
+				 (5 << 8)     |	/* Read col change cmd */ \
+				 (0xE0 << 16) |	/* Read col change end cmd */ \
+				 (1 << 24)) /* Read col change end cmd valid */
+#define PL353_NAND_ECC_BUSY_TIMEOUT	(1 * HZ)
+/**
+ * struct pl353_smc_data - Private smc driver structure
+ * @memclk:		Pointer to the peripheral clock
+ * @aclk:		Pointer to the APER clock
+ */
+struct pl353_smc_data {
+	struct clk		*memclk;
+	struct clk		*aclk;
+};
+
+/* SMC virtual register base */
+static void __iomem *pl353_smc_base;
+
+/**
+ * pl353_smc_set_buswidth - Set memory buswidth
+ * @bw: Memory buswidth (8 | 16)
+ * Return: 0 on success or negative errno.
+ */
+int pl353_smc_set_buswidth(unsigned int bw)
+{
+	if (bw != PL353_SMC_MEM_WIDTH_8  && bw != PL353_SMC_MEM_WIDTH_16)
+		return -EINVAL;
+
+	writel(bw, pl353_smc_base + PL353_SMC_SET_OPMODE_OFFS);
+	writel(PL353_SMC_DC_UPT_NAND_REGS, pl353_smc_base +
+	       PL353_SMC_DIRECT_CMD_OFFS);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(pl353_smc_set_buswidth);
+
+/**
+ * pl353_smc_set_cycles - Set memory timing parameters
+ * @timings: NAND controller timing parameters
+ *
+ * Sets NAND chip specific timing parameters.
+ */
+void pl353_smc_set_cycles(u32 timings[])
+{
+	/*
+	 * Set write pulse timing. This one is easy to extract:
+	 *
+	 * NWE_PULSE = tWP
+	 */
+	timings[0] &= PL353_SMC_SET_CYCLES_T0_MASK;
+	timings[1] = (timings[1] & PL353_SMC_SET_CYCLES_T1_MASK) <<
+			PL353_SMC_SET_CYCLES_T1_SHIFT;
+	timings[2] = (timings[2]  & PL353_SMC_SET_CYCLES_T2_MASK) <<
+			PL353_SMC_SET_CYCLES_T2_SHIFT;
+	timings[3] = (timings[3]  & PL353_SMC_SET_CYCLES_T3_MASK) <<
+			PL353_SMC_SET_CYCLES_T3_SHIFT;
+	timings[4] = (timings[4] & PL353_SMC_SET_CYCLES_T4_MASK) <<
+			PL353_SMC_SET_CYCLES_T4_SHIFT;
+	timings[5]  = (timings[5]  & PL353_SMC_SET_CYCLES_T5_MASK) <<
+			PL353_SMC_SET_CYCLES_T5_SHIFT;
+	timings[6]  = (timings[6]  & PL353_SMC_SET_CYCLES_T6_MASK) <<
+			PL353_SMC_SET_CYCLES_T6_SHIFT;
+	timings[0] |= timings[1] | timings[2] | timings[3] |
+			timings[4] | timings[5] | timings[6];
+
+	writel(timings[0], pl353_smc_base + PL353_SMC_SET_CYCLES_OFFS);
+	writel(PL353_SMC_DC_UPT_NAND_REGS, pl353_smc_base +
+	       PL353_SMC_DIRECT_CMD_OFFS);
+}
+EXPORT_SYMBOL_GPL(pl353_smc_set_cycles);
+
+/**
+ * pl353_smc_ecc_is_busy - Read ecc busy flag
+ * Return: the ecc_status bit from the ecc_status register. 1 = busy, 0 = idle
+ */
+bool pl353_smc_ecc_is_busy(void)
+{
+	return ((readl(pl353_smc_base + PL353_SMC_ECC_STATUS_OFFS) &
+		  PL353_SMC_ECC_STATUS_BUSY) == PL353_SMC_ECC_STATUS_BUSY);
+}
+EXPORT_SYMBOL_GPL(pl353_smc_ecc_is_busy);
+
+/**
+ * pl353_smc_get_ecc_val - Read ecc_valueN registers
+ * @ecc_reg: Index of the ecc_value reg (0..3)
+ * Return: the content of the requested ecc_value register.
+ *
+ * There are four valid ecc_value registers. The argument is truncated to stay
+ * within this valid boundary.
+ */
+u32 pl353_smc_get_ecc_val(int ecc_reg)
+{
+	u32 addr, reg;
+
+	addr = PL353_SMC_ECC_VALUE0_OFFS +
+		(ecc_reg * PL353_SMC_ECC_REG_SIZE_OFFS);
+	reg = readl(pl353_smc_base + addr);
+
+	return reg;
+}
+EXPORT_SYMBOL_GPL(pl353_smc_get_ecc_val);
+
+/**
+ * pl353_smc_get_nand_int_status_raw - Get NAND interrupt status bit
+ * Return: the raw_int_status1 bit from the memc_status register
+ */
+int pl353_smc_get_nand_int_status_raw(void)
+{
+	u32 reg;
+
+	reg = readl(pl353_smc_base + PL353_SMC_MEMC_STATUS_OFFS);
+	reg >>= PL353_SMC_MEMC_STATUS_RAW_INT_1_SHIFT;
+	reg &= 1;
+
+	return reg;
+}
+EXPORT_SYMBOL_GPL(pl353_smc_get_nand_int_status_raw);
+
+/**
+ * pl353_smc_clr_nand_int - Clear NAND interrupt
+ */
+void pl353_smc_clr_nand_int(void)
+{
+	writel(PL353_SMC_CFG_CLR_INT_CLR_1,
+	       pl353_smc_base + PL353_SMC_CFG_CLR_OFFS);
+}
+EXPORT_SYMBOL_GPL(pl353_smc_clr_nand_int);
+
+/**
+ * pl353_smc_set_ecc_mode - Set SMC ECC mode
+ * @mode: ECC mode (BYPASS, APB, MEM)
+ * Return: 0 on success or negative errno.
+ */
+int pl353_smc_set_ecc_mode(enum pl353_smc_ecc_mode mode)
+{
+	u32 reg;
+	int ret = 0;
+
+	switch (mode) {
+	case PL353_SMC_ECCMODE_BYPASS:
+	case PL353_SMC_ECCMODE_APB:
+	case PL353_SMC_ECCMODE_MEM:
+
+		reg = readl(pl353_smc_base + PL353_SMC_ECC_MEMCFG_OFFS);
+		reg &= ~PL353_SMC_ECC_MEMCFG_MODE_MASK;
+		reg |= mode << PL353_SMC_ECC_MEMCFG_MODE_SHIFT;
+		writel(reg, pl353_smc_base + PL353_SMC_ECC_MEMCFG_OFFS);
+
+		break;
+	default:
+		ret = -EINVAL;
+	}
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(pl353_smc_set_ecc_mode);
+
+/**
+ * pl353_smc_set_ecc_pg_size - Set SMC ECC page size
+ * @pg_sz: ECC page size
+ * Return: 0 on success or negative errno.
+ */
+int pl353_smc_set_ecc_pg_size(unsigned int pg_sz)
+{
+	u32 reg, sz;
+
+	switch (pg_sz) {
+	case 0:
+		sz = 0;
+		break;
+	case SZ_512:
+		sz = 1;
+		break;
+	case SZ_1K:
+		sz = 2;
+		break;
+	case SZ_2K:
+		sz = 3;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	reg = readl(pl353_smc_base + PL353_SMC_ECC_MEMCFG_OFFS);
+	reg &= ~PL353_SMC_ECC_MEMCFG_PGSIZE_MASK;
+	reg |= sz;
+	writel(reg, pl353_smc_base + PL353_SMC_ECC_MEMCFG_OFFS);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(pl353_smc_set_ecc_pg_size);
+
+static int __maybe_unused pl353_smc_suspend(struct device *dev)
+{
+	struct pl353_smc_data *pl353_smc = dev_get_drvdata(dev);
+
+	clk_disable(pl353_smc->memclk);
+	clk_disable(pl353_smc->aclk);
+
+	return 0;
+}
+
+static int __maybe_unused pl353_smc_resume(struct device *dev)
+{
+	int ret;
+	struct pl353_smc_data *pl353_smc = dev_get_drvdata(dev);
+
+	ret = clk_enable(pl353_smc->aclk);
+	if (ret) {
+		dev_err(dev, "Cannot enable axi domain clock.\n");
+		return ret;
+	}
+
+	ret = clk_enable(pl353_smc->memclk);
+	if (ret) {
+		dev_err(dev, "Cannot enable memory clock.\n");
+		clk_disable(pl353_smc->aclk);
+		return ret;
+	}
+
+	return ret;
+}
+
+static struct amba_driver pl353_smc_driver;
+
+static SIMPLE_DEV_PM_OPS(pl353_smc_dev_pm_ops, pl353_smc_suspend,
+			 pl353_smc_resume);
+
+/**
+ * pl353_smc_init_nand_interface - Initialize the NAND interface
+ * @adev: Pointer to the amba_device struct
+ * @nand_node: Pointer to the pl353_nand device_node struct
+ */
+static void pl353_smc_init_nand_interface(struct amba_device *adev,
+					  struct device_node *nand_node)
+{
+	unsigned long timeout;
+
+	pl353_smc_set_buswidth(PL353_SMC_MEM_WIDTH_8);
+	writel(PL353_SMC_CFG_CLR_INT_CLR_1,
+	       pl353_smc_base + PL353_SMC_CFG_CLR_OFFS);
+	writel(PL353_SMC_DC_UPT_NAND_REGS, pl353_smc_base +
+	       PL353_SMC_DIRECT_CMD_OFFS);
+
+	timeout = jiffies + PL353_NAND_ECC_BUSY_TIMEOUT;
+	/* Wait till the ECC operation is complete */
+	do {
+		if (pl353_smc_ecc_is_busy())
+			cpu_relax();
+		else
+			break;
+	} while (!time_after_eq(jiffies, timeout));
+
+	if (time_after_eq(jiffies, timeout))
+		return;
+
+	writel(PL353_NAND_ECC_CMD1,
+	       pl353_smc_base + PL353_SMC_ECC_MEMCMD1_OFFS);
+	writel(PL353_NAND_ECC_CMD2,
+	       pl353_smc_base + PL353_SMC_ECC_MEMCMD2_OFFS);
+}
+
+static const struct of_device_id pl353_smc_supported_children[] = {
+	{
+		.compatible = "cfi-flash"
+	},
+	{
+		.compatible = "arm,pl353-nand-r2p1",
+		.data = pl353_smc_init_nand_interface
+	},
+	{}
+};
+
+static int pl353_smc_probe(struct amba_device *adev, const struct amba_id *id)
+{
+	struct pl353_smc_data *pl353_smc;
+	struct device_node *child;
+	struct resource *res;
+	int err;
+	struct device_node *of_node = adev->dev.of_node;
+	static void (*init)(struct amba_device *adev,
+			    struct device_node *nand_node);
+	const struct of_device_id *match = NULL;
+
+	pl353_smc = devm_kzalloc(&adev->dev, sizeof(*pl353_smc), GFP_KERNEL);
+	if (!pl353_smc)
+		return -ENOMEM;
+
+	/* Get the NAND controller virtual address */
+	res = &adev->res;
+	pl353_smc_base = devm_ioremap_resource(&adev->dev, res);
+	if (IS_ERR(pl353_smc_base))
+		return PTR_ERR(pl353_smc_base);
+
+	pl353_smc->aclk = devm_clk_get(&adev->dev, "apb_pclk");
+	if (IS_ERR(pl353_smc->aclk)) {
+		dev_err(&adev->dev, "aclk clock not found.\n");
+		return PTR_ERR(pl353_smc->aclk);
+	}
+
+	pl353_smc->memclk = devm_clk_get(&adev->dev, "memclk");
+	if (IS_ERR(pl353_smc->memclk)) {
+		dev_err(&adev->dev, "memclk clock not found.\n");
+		return PTR_ERR(pl353_smc->memclk);
+	}
+
+	err = clk_prepare_enable(pl353_smc->aclk);
+	if (err) {
+		dev_err(&adev->dev, "Unable to enable AXI clock.\n");
+		return err;
+	}
+
+	err = clk_prepare_enable(pl353_smc->memclk);
+	if (err) {
+		dev_err(&adev->dev, "Unable to enable memory clock.\n");
+		goto out_clk_dis_aper;
+	}
+
+	amba_set_drvdata(adev, pl353_smc);
+
+	/* clear interrupts */
+	writel(PL353_SMC_CFG_CLR_DEFAULT_MASK,
+	       pl353_smc_base + PL353_SMC_CFG_CLR_OFFS);
+
+	/* Find compatible children. Only a single child is supported */
+	for_each_available_child_of_node(of_node, child) {
+		match = of_match_node(pl353_smc_supported_children, child);
+		if (!match) {
+			dev_warn(&adev->dev, "unsupported child node\n");
+			continue;
+		}
+		break;
+	}
+	if (!match) {
+		dev_err(&adev->dev, "no matching children\n");
+		goto out_clk_disable;
+	}
+
+	init = match->data;
+	if (init)
+		init(adev, child);
+	of_platform_device_create(child, NULL, &adev->dev);
+
+	return 0;
+
+out_clk_disable:
+	clk_disable_unprepare(pl353_smc->memclk);
+out_clk_dis_aper:
+	clk_disable_unprepare(pl353_smc->aclk);
+
+	return err;
+}
+
+static int pl353_smc_remove(struct amba_device *adev)
+{
+	struct pl353_smc_data *pl353_smc = amba_get_drvdata(adev);
+
+	clk_disable_unprepare(pl353_smc->memclk);
+	clk_disable_unprepare(pl353_smc->aclk);
+
+	return 0;
+}
+
+static const struct amba_id pl353_ids[] = {
+	{
+	.id = 0x00041353,
+	.mask = 0x000fffff,
+	},
+	{ 0, 0 },
+};
+MODULE_DEVICE_TABLE(amba, pl353_ids);
+
+static struct amba_driver pl353_smc_driver = {
+	.drv = {
+		.owner = THIS_MODULE,
+		.name = "pl353-smc",
+		.pm = &pl353_smc_dev_pm_ops,
+	},
+	.id_table = pl353_ids,
+	.probe = pl353_smc_probe,
+	.remove = pl353_smc_remove,
+};
+
+module_amba_driver(pl353_smc_driver);
+
+MODULE_AUTHOR("Xilinx, Inc.");
+MODULE_DESCRIPTION("ARM PL353 SMC Driver");
+MODULE_LICENSE("GPL");