diff options
author | Mike Snitzer <snitzer@redhat.com> | 2019-04-03 12:23:11 -0400 |
---|---|---|
committer | Mike Snitzer <snitzer@redhat.com> | 2019-04-04 15:33:59 -0400 |
commit | bcb44433bba5eaff293888ef22ffa07f1f0347d6 (patch) | |
tree | 906b582ae66f43342136b0b06a048101498cc246 /drivers/md/dm.c | |
parent | eb40c0acdc342b815d4d03ae6abb09e80c0f2988 (diff) |
dm: disable DISCARD if the underlying storage no longer supports it
Storage devices which report supporting discard commands like
WRITE_SAME_16 with unmap, but reject discard commands sent to the
storage device. This is a clear storage firmware bug but it doesn't
change the fact that should a program cause discards to be sent to a
multipath device layered on this buggy storage, all paths can end up
failed at the same time from the discards, causing possible I/O loss.
The first discard to a path will fail with Illegal Request, Invalid
field in cdb, e.g.:
kernel: sd 8:0:8:19: [sdfn] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
kernel: sd 8:0:8:19: [sdfn] tag#0 Sense Key : Illegal Request [current]
kernel: sd 8:0:8:19: [sdfn] tag#0 Add. Sense: Invalid field in cdb
kernel: sd 8:0:8:19: [sdfn] tag#0 CDB: Write same(16) 93 08 00 00 00 00 00 a0 08 00 00 00 80 00 00 00
kernel: blk_update_request: critical target error, dev sdfn, sector 10487808
The SCSI layer converts this to the BLK_STS_TARGET error number, the sd
device disables its support for discard on this path, and because of the
BLK_STS_TARGET error multipath fails the discard without failing any
path or retrying down a different path. But subsequent discards can
cause path failures. Any discards sent to the path which already failed
a discard ends up failing with EIO from blk_cloned_rq_check_limits with
an "over max size limit" error since the discard limit was set to 0 by
the sd driver for the path. As the error is EIO, this now fails the
path and multipath tries to send the discard down the next path. This
cycle continues as discards are sent until all paths fail.
Fix this by training DM core to disable DISCARD if the underlying
storage already did so.
Also, fix branching in dm_done() and clone_endio() to reflect the
mutually exclussive nature of the IO operations in question.
Cc: stable@vger.kernel.org
Reported-by: David Jeffery <djeffery@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Diffstat (limited to 'drivers/md/dm.c')
-rw-r--r-- | drivers/md/dm.c | 20 |
1 files changed, 16 insertions, 4 deletions
diff --git a/drivers/md/dm.c b/drivers/md/dm.c index 89b04169658d..043f0761e4a0 100644 --- a/drivers/md/dm.c +++ b/drivers/md/dm.c @@ -945,6 +945,15 @@ static void dec_pending(struct dm_io *io, blk_status_t error) } } +void disable_discard(struct mapped_device *md) +{ + struct queue_limits *limits = dm_get_queue_limits(md); + + /* device doesn't really support DISCARD, disable it */ + limits->max_discard_sectors = 0; + blk_queue_flag_clear(QUEUE_FLAG_DISCARD, md->queue); +} + void disable_write_same(struct mapped_device *md) { struct queue_limits *limits = dm_get_queue_limits(md); @@ -970,11 +979,14 @@ static void clone_endio(struct bio *bio) dm_endio_fn endio = tio->ti->type->end_io; if (unlikely(error == BLK_STS_TARGET) && md->type != DM_TYPE_NVME_BIO_BASED) { - if (bio_op(bio) == REQ_OP_WRITE_SAME && - !bio->bi_disk->queue->limits.max_write_same_sectors) + if (bio_op(bio) == REQ_OP_DISCARD && + !bio->bi_disk->queue->limits.max_discard_sectors) + disable_discard(md); + else if (bio_op(bio) == REQ_OP_WRITE_SAME && + !bio->bi_disk->queue->limits.max_write_same_sectors) disable_write_same(md); - if (bio_op(bio) == REQ_OP_WRITE_ZEROES && - !bio->bi_disk->queue->limits.max_write_zeroes_sectors) + else if (bio_op(bio) == REQ_OP_WRITE_ZEROES && + !bio->bi_disk->queue->limits.max_write_zeroes_sectors) disable_write_zeroes(md); } |