Merge tag 'powerpc-4.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

Pull powerpc updates from Michael Ellerman:
 "Highlights include:

   - Support for direct mapped LPC on POWER9, giving Linux direct access
     to devices that may be on there such as a UART.

   - Memory hotplug support for the Power9 Radix MMU.

   - Add new AUX vectors describing the processor's cache geometry, to
     be used by glibc.

   - The ability for a guest to ask the hypervisor to resize the guest's
     hash table, and in addition support for doing so automatically when
     memory is hotplugged into/out-of the guest. This allows the hash
     table to be sized based on the current memory usage of the guest,
     rather than the maximum possible memory usage.

   - Implementation of optprobes (kprobe optimisation) for powerpc.

  In addition there's the topic branch shared with the KVM tree, which
  includes support for guests to use the Radix MMU on Power9.

  Thanks to:
    Alistair Popple, Andrew Donnellan, Aneesh Kumar K.V, Anju T, Anton
    Blanchard, Benjamin Herrenschmidt, Chris Packham, Daniel Axtens,
    Daniel Borkmann, David Gibson, Finn Thain, Gautham R. Shenoy, Gavin
    Shan, Greg Kurz, Joel Stanley, John Allen, Madhavan Srinivasan,
    Mahesh Salgaonkar, Markus Elfring, Michael Neuling, Nathan Fontenot,
    Naveen N. Rao, Nicholas Piggin, Paul Mackerras, Ravi Bangoria, Reza
    Arbab, Shailendra Singh, Vaibhav Jain, Wei Yongjun"

* tag 'powerpc-4.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (129 commits)
  powerpc/mm/radix: Skip ptesync in pte update helpers
  powerpc/mm/radix: Use ptep_get_and_clear_full when clearing pte for full mm
  powerpc/mm/radix: Update pte update sequence for pte clear case
  powerpc/mm: Update PROTFAULT handling in the page fault path
  powerpc/xmon: Fix data-breakpoint
  powerpc/mm: Fix build break with BOOK3S_64=n and MEMORY_HOTPLUG=y
  powerpc/mm: Fix build break when CMA=n && SPAPR_TCE_IOMMU=y
  powerpc/mm: Fix build break with RADIX=y & HUGETLBFS=n
  powerpc/pseries: Fix typo in parameter description
  powerpc/kprobes: Remove kprobe_exceptions_notify()
  kprobes: Introduce weak variant of kprobe_exceptions_notify()
  powerpc/ftrace: Fix confusing help text for DISABLE_MPROFILE_KERNEL
  powerpc/powernv: Fix opal_exit tracepoint opcode
  powerpc: Add a prototype for mcount() so it can be versioned
  powerpc: Drop GPL from of_node_to_nid() export to match other arches
  powerpc/kprobes: Optimize kprobe in kretprobe_trampoline()
  powerpc/kprobes: Implement Optprobes
  powerpc/kprobes: Fixes for kprobe_lookup_name() on BE
  powerpc: Add helper to check if offset is within relative branch range
  powerpc/bpf: Introduce __PPC_SH64()
  ...

5 files changed, 217 insertions, 783 deletions

diff --git a/drivers/macintosh/Kconfig b/drivers/macintosh/Kconfig
index 5d80810934df..97a420c11eed 100644
--- a/drivers/macintosh/Kconfig
+++ b/drivers/macintosh/Kconfig
@@ -30,14 +30,6 @@ config ADB_MACII
 	  Quadra 610, Quadra 650, Quadra 700, Quadra 800, Centris 610 and
 	  Centris 650.
 
-config ADB_MACIISI
-	bool "Include Mac IIsi ADB driver"
-	depends on ADB && MAC && BROKEN
-	help
-	  Say Y here if want your kernel to support Macintosh systems that use
-	  the Mac IIsi style ADB.  This includes the IIsi, IIvi, IIvx, Classic
-	  II, LC, LC II, LC III, Performa 460, and the Performa 600.
-
 config ADB_IOP
 	bool "Include IOP (IIfx/Quadra 9x0) ADB driver"
 	depends on ADB && MAC
@@ -60,17 +52,15 @@ config ADB_PMU68K
 
 # we want to change this to something like CONFIG_SYSCTRL_CUDA/PMU
 config ADB_CUDA
-	bool "Support for CUDA based Macs and PowerMacs"
+	bool "Support for Cuda/Egret based Macs and PowerMacs"
 	depends on (ADB || PPC_PMAC) && !PPC_PMAC64
 	help
-	  This provides support for CUDA based Macintosh and Power Macintosh
-	  systems.  This includes many m68k based Macs (Color Classic, Mac TV,
-	  Performa 475, Performa 520, Performa 550, Performa 575,
-	  Performa 588, Quadra 605, Quadra 630, Quadra/Centris 660AV, and
-	  Quadra 840AV), most OldWorld PowerMacs, the first generation iMacs,
-	  the Blue&White G3 and the "Yikes" G4 (PCI Graphics).  All later
-	  models should use CONFIG_ADB_PMU instead.  It is safe to say Y here
-	  even if your machine doesn't have a CUDA.
+	  This provides support for Cuda/Egret based Macintosh and
+	  Power Macintosh systems. This includes most m68k based Macs,
+	  most Old World PowerMacs, the first generation iMacs, the
+	  Blue & White G3 and the "Yikes" G4 (PCI Graphics). All later
+	  models should use CONFIG_ADB_PMU instead. It is safe to say Y
+	  here even if your machine doesn't have a Cuda or Egret device.
 
 	  If unsure say Y.
 
diff --git a/drivers/macintosh/Makefile b/drivers/macintosh/Makefile
index 383ba920085b..516eb65bcacc 100644
--- a/drivers/macintosh/Makefile
+++ b/drivers/macintosh/Makefile
@@ -20,7 +20,6 @@ obj-$(CONFIG_PMAC_SMU)		+= smu.o
 
 obj-$(CONFIG_ADB)		+= adb.o
 obj-$(CONFIG_ADB_MACII)		+= via-macii.o
-obj-$(CONFIG_ADB_MACIISI)	+= via-maciisi.o
 obj-$(CONFIG_ADB_IOP)		+= adb-iop.o
 obj-$(CONFIG_ADB_PMU68K)	+= via-pmu68k.o
 obj-$(CONFIG_ADB_MACIO)		+= macio-adb.o
diff --git a/drivers/macintosh/adb.c b/drivers/macintosh/adb.c
index 226179b975a0..152414e6378a 100644
--- a/drivers/macintosh/adb.c
+++ b/drivers/macintosh/adb.c
@@ -48,7 +48,6 @@
 EXPORT_SYMBOL(adb_client_list);
 
 extern struct adb_driver via_macii_driver;
-extern struct adb_driver via_maciisi_driver;
 extern struct adb_driver via_cuda_driver;
 extern struct adb_driver adb_iop_driver;
 extern struct adb_driver via_pmu_driver;
@@ -59,9 +58,6 @@ static struct adb_driver *adb_driver_list[] = {
 #ifdef CONFIG_ADB_MACII
 	&via_macii_driver,
 #endif
-#ifdef CONFIG_ADB_MACIISI
-	&via_maciisi_driver,
-#endif
 #ifdef CONFIG_ADB_CUDA
 	&via_cuda_driver,
 #endif
diff --git a/drivers/macintosh/via-cuda.c b/drivers/macintosh/via-cuda.c
index 2088e23a8002..c60415958dfe 100644
--- a/drivers/macintosh/via-cuda.c
+++ b/drivers/macintosh/via-cuda.c
@@ -1,10 +1,10 @@
 /*
- * Device driver for the via-cuda on Apple Powermacs.
+ * Device driver for the Cuda and Egret system controllers found on PowerMacs
+ * and 68k Macs.
  *
- * The VIA (versatile interface adapter) interfaces to the CUDA,
- * a 6805 microprocessor core which controls the ADB (Apple Desktop
- * Bus) which connects to the keyboard and mouse.  The CUDA also
- * controls system power and the RTC (real time clock) chip.
+ * The Cuda or Egret is a 6805 microcontroller interfaced to the 6522 VIA.
+ * This MCU controls system power, Parameter RAM, Real Time Clock and the
+ * Apple Desktop Bus (ADB) that connects to the keyboard and mouse.
  *
  * Copyright (C) 1996 Paul Mackerras.
  */
@@ -50,10 +50,27 @@ static DEFINE_SPINLOCK(cuda_lock);
 #define IER		(14*RS)		/* Interrupt enable register */
 #define ANH		(15*RS)		/* A-side data, no handshake */
 
-/* Bits in B data register: all active low */
-#define TREQ		0x08		/* Transfer request (input) */
-#define TACK		0x10		/* Transfer acknowledge (output) */
-#define TIP		0x20		/* Transfer in progress (output) */
+/*
+ * When the Cuda design replaced the Egret, some signal names and
+ * logic sense changed. They all serve the same purposes, however.
+ *
+ *   VIA pin       |  Egret pin
+ * ----------------+------------------------------------------
+ *   PB3 (input)   |  Transceiver session   (active low)
+ *   PB4 (output)  |  VIA full              (active high)
+ *   PB5 (output)  |  System session        (active high)
+ *
+ *   VIA pin       |  Cuda pin
+ * ----------------+------------------------------------------
+ *   PB3 (input)   |  Transfer request      (active low)
+ *   PB4 (output)  |  Byte acknowledge      (active low)
+ *   PB5 (output)  |  Transfer in progress  (active low)
+ */
+
+/* Bits in Port B data register */
+#define TREQ		0x08		/* Transfer request */
+#define TACK		0x10		/* Transfer acknowledge */
+#define TIP		0x20		/* Transfer in progress */
 
 /* Bits in ACR */
 #define SR_CTRL		0x1c		/* Shift register control bits */
@@ -65,6 +82,74 @@ static DEFINE_SPINLOCK(cuda_lock);
 #define IER_CLR		0		/* clear bits in IER */
 #define SR_INT		0x04		/* Shift register full/empty */
 
+/* Duration of byte acknowledgement pulse (us) */
+#define EGRET_TACK_ASSERTED_DELAY	300
+#define EGRET_TACK_NEGATED_DELAY	400
+
+/* Interval from interrupt to start of session (us) */
+#define EGRET_SESSION_DELAY		450
+
+#ifdef CONFIG_PPC
+#define mcu_is_egret	false
+#else
+static bool mcu_is_egret;
+#endif
+
+static inline bool TREQ_asserted(u8 portb)
+{
+	return !(portb & TREQ);
+}
+
+static inline void assert_TIP(void)
+{
+	if (mcu_is_egret) {
+		udelay(EGRET_SESSION_DELAY);
+		out_8(&via[B], in_8(&via[B]) | TIP);
+	} else
+		out_8(&via[B], in_8(&via[B]) & ~TIP);
+}
+
+static inline void assert_TIP_and_TACK(void)
+{
+	if (mcu_is_egret) {
+		udelay(EGRET_SESSION_DELAY);
+		out_8(&via[B], in_8(&via[B]) | TIP | TACK);
+	} else
+		out_8(&via[B], in_8(&via[B]) & ~(TIP | TACK));
+}
+
+static inline void assert_TACK(void)
+{
+	if (mcu_is_egret) {
+		udelay(EGRET_TACK_NEGATED_DELAY);
+		out_8(&via[B], in_8(&via[B]) | TACK);
+	} else
+		out_8(&via[B], in_8(&via[B]) & ~TACK);
+}
+
+static inline void toggle_TACK(void)
+{
+	out_8(&via[B], in_8(&via[B]) ^ TACK);
+}
+
+static inline void negate_TACK(void)
+{
+	if (mcu_is_egret) {
+		udelay(EGRET_TACK_ASSERTED_DELAY);
+		out_8(&via[B], in_8(&via[B]) & ~TACK);
+	} else
+		out_8(&via[B], in_8(&via[B]) | TACK);
+}
+
+static inline void negate_TIP_and_TACK(void)
+{
+	if (mcu_is_egret) {
+		udelay(EGRET_TACK_ASSERTED_DELAY);
+		out_8(&via[B], in_8(&via[B]) & ~(TIP | TACK));
+	} else
+		out_8(&via[B], in_8(&via[B]) | TIP | TACK);
+}
+
 static enum cuda_state {
     idle,
     sent_first_byte,
@@ -120,11 +205,13 @@ int __init find_via_cuda(void)
     struct adb_request req;
     int err;
 
-    if (macintosh_config->adb_type != MAC_ADB_CUDA)
+    if (macintosh_config->adb_type != MAC_ADB_CUDA &&
+        macintosh_config->adb_type != MAC_ADB_EGRET)
 	return 0;
 
     via = via1;
     cuda_state = idle;
+    mcu_is_egret = macintosh_config->adb_type == MAC_ADB_EGRET;
 
     err = cuda_init_via();
     if (err) {
@@ -221,7 +308,7 @@ static int __init via_cuda_start(void)
 	return -EAGAIN;
     }
 
-    printk("Macintosh CUDA driver v0.5 for Unified ADB.\n");
+    pr_info("Macintosh Cuda and Egret driver.\n");
 
     cuda_fully_inited = 1;
     return 0;
@@ -237,7 +324,8 @@ cuda_probe(void)
     if (sys_ctrler != SYS_CTRLER_CUDA)
 	return -ENODEV;
 #else
-    if (macintosh_config->adb_type != MAC_ADB_CUDA)
+    if (macintosh_config->adb_type != MAC_ADB_CUDA &&
+        macintosh_config->adb_type != MAC_ADB_EGRET)
 	return -ENODEV;
 #endif
     if (via == NULL)
@@ -246,12 +334,39 @@ cuda_probe(void)
 }
 #endif /* CONFIG_ADB */
 
+static int __init sync_egret(void)
+{
+	if (TREQ_asserted(in_8(&via[B]))) {
+		/* Complete the inbound transfer */
+		assert_TIP_and_TACK();
+		while (1) {
+			negate_TACK();
+			mdelay(1);
+			(void)in_8(&via[SR]);
+			assert_TACK();
+			if (!TREQ_asserted(in_8(&via[B])))
+				break;
+		}
+		negate_TIP_and_TACK();
+	} else if (in_8(&via[B]) & TIP) {
+		/* Terminate the outbound transfer */
+		negate_TACK();
+		assert_TACK();
+		mdelay(1);
+		negate_TIP_and_TACK();
+	}
+	/* Clear shift register interrupt */
+	if (in_8(&via[IFR]) & SR_INT)
+		(void)in_8(&via[SR]);
+	return 0;
+}
+
 #define WAIT_FOR(cond, what)					\
     do {                                                        \
     	int x;							\
 	for (x = 1000; !(cond); --x) {				\
 	    if (x == 0) {					\
-		printk("Timeout waiting for " what "\n");	\
+		pr_err("Timeout waiting for " what "\n");	\
 		return -ENXIO;					\
 	    }							\
 	    udelay(100);					\
@@ -261,10 +376,6 @@ cuda_probe(void)
 static int
 __init cuda_init_via(void)
 {
-    out_8(&via[DIRB], (in_8(&via[DIRB]) | TACK | TIP) & ~TREQ);	/* TACK & TIP out */
-    out_8(&via[B], in_8(&via[B]) | TACK | TIP);			/* negate them */
-    out_8(&via[ACR] ,(in_8(&via[ACR]) & ~SR_CTRL) | SR_EXT);	/* SR data in */
-    (void)in_8(&via[SR]);						/* clear any left-over data */
 #ifdef CONFIG_PPC
     out_8(&via[IER], 0x7f);					/* disable interrupts from VIA */
     (void)in_8(&via[IER]);
@@ -272,16 +383,25 @@ __init cuda_init_via(void)
     out_8(&via[IER], SR_INT);					/* disable SR interrupt from VIA */
 #endif
 
+    out_8(&via[DIRB], (in_8(&via[DIRB]) | TACK | TIP) & ~TREQ);	/* TACK & TIP out */
+    out_8(&via[ACR], (in_8(&via[ACR]) & ~SR_CTRL) | SR_EXT);	/* SR data in */
+    (void)in_8(&via[SR]);					/* clear any left-over data */
+
+    if (mcu_is_egret)
+	return sync_egret();
+
+    negate_TIP_and_TACK();
+
     /* delay 4ms and then clear any pending interrupt */
     mdelay(4);
     (void)in_8(&via[SR]);
     out_8(&via[IFR], SR_INT);
 
     /* sync with the CUDA - assert TACK without TIP */
-    out_8(&via[B], in_8(&via[B]) & ~TACK);
+    assert_TACK();
 
     /* wait for the CUDA to assert TREQ in response */
-    WAIT_FOR((in_8(&via[B]) & TREQ) == 0, "CUDA response to sync");
+    WAIT_FOR(TREQ_asserted(in_8(&via[B])), "CUDA response to sync");
 
     /* wait for the interrupt and then clear it */
     WAIT_FOR(in_8(&via[IFR]) & SR_INT, "CUDA response to sync (2)");
@@ -289,14 +409,13 @@ __init cuda_init_via(void)
     out_8(&via[IFR], SR_INT);
 
     /* finish the sync by negating TACK */
-    out_8(&via[B], in_8(&via[B]) | TACK);
+    negate_TACK();
 
     /* wait for the CUDA to negate TREQ and the corresponding interrupt */
-    WAIT_FOR(in_8(&via[B]) & TREQ, "CUDA response to sync (3)");
+    WAIT_FOR(!TREQ_asserted(in_8(&via[B])), "CUDA response to sync (3)");
     WAIT_FOR(in_8(&via[IFR]) & SR_INT, "CUDA response to sync (4)");
     (void)in_8(&via[SR]);
     out_8(&via[IFR], SR_INT);
-    out_8(&via[B], in_8(&via[B]) | TIP);	/* should be unnecessary */
 
     return 0;
 }
@@ -357,6 +476,7 @@ cuda_reset_adb_bus(void)
     return 0;
 }
 #endif /* CONFIG_ADB */
+
 /* Construct and send a cuda request */
 int
 cuda_request(struct adb_request *req, void (*done)(struct adb_request *),
@@ -413,47 +533,43 @@ cuda_write(struct adb_request *req)
 static void
 cuda_start(void)
 {
-    struct adb_request *req;
-
     /* assert cuda_state == idle */
-    /* get the packet to send */
-    req = current_req;
-    if (req == 0)
+    if (current_req == NULL)
 	return;
-    if ((in_8(&via[B]) & TREQ) == 0)
+    data_index = 0;
+    if (TREQ_asserted(in_8(&via[B])))
 	return;			/* a byte is coming in from the CUDA */
 
     /* set the shift register to shift out and send a byte */
     out_8(&via[ACR], in_8(&via[ACR]) | SR_OUT);
-    out_8(&via[SR], req->data[0]);
-    out_8(&via[B], in_8(&via[B]) & ~TIP);
+    out_8(&via[SR], current_req->data[data_index++]);
+    if (mcu_is_egret)
+	assert_TIP_and_TACK();
+    else
+	assert_TIP();
     cuda_state = sent_first_byte;
 }
 
 void
 cuda_poll(void)
 {
-    /* cuda_interrupt only takes a normal lock, we disable
-     * interrupts here to avoid re-entering and thus deadlocking.
-     */
-    if (cuda_irq)
-	disable_irq(cuda_irq);
-    cuda_interrupt(0, NULL);
-    if (cuda_irq)
-	enable_irq(cuda_irq);
+	cuda_interrupt(0, NULL);
 }
 EXPORT_SYMBOL(cuda_poll);
 
+#define ARRAY_FULL(a, p)	((p) - (a) == ARRAY_SIZE(a))
+
 static irqreturn_t
 cuda_interrupt(int irq, void *arg)
 {
-    int status;
+    unsigned long flags;
+    u8 status;
     struct adb_request *req = NULL;
     unsigned char ibuf[16];
     int ibuf_len = 0;
     int complete = 0;
     
-    spin_lock(&cuda_lock);
+    spin_lock_irqsave(&cuda_lock, flags);
 
     /* On powermacs, this handler is registered for the VIA IRQ. But they use
      * just the shift register IRQ -- other VIA interrupt sources are disabled.
@@ -466,52 +582,50 @@ cuda_interrupt(int irq, void *arg)
 #endif
     {
         if ((in_8(&via[IFR]) & SR_INT) == 0) {
-            spin_unlock(&cuda_lock);
+            spin_unlock_irqrestore(&cuda_lock, flags);
             return IRQ_NONE;
         } else {
             out_8(&via[IFR], SR_INT);
         }
     }
-    
-    status = (~in_8(&via[B]) & (TIP|TREQ)) | (in_8(&via[ACR]) & SR_OUT);
-    /* printk("cuda_interrupt: state=%d status=%x\n", cuda_state, status); */
+
+    status = in_8(&via[B]) & (TIP | TACK | TREQ);
+
     switch (cuda_state) {
     case idle:
-	/* CUDA has sent us the first byte of data - unsolicited */
-	if (status != TREQ)
-	    printk("cuda: state=idle, status=%x\n", status);
+	/* System controller has unsolicited data for us */
 	(void)in_8(&via[SR]);
-	out_8(&via[B], in_8(&via[B]) & ~TIP);
+idle_state:
+	assert_TIP();
 	cuda_state = reading;
 	reply_ptr = cuda_rbuf;
 	reading_reply = 0;
 	break;
 
     case awaiting_reply:
-	/* CUDA has sent us the first byte of data of a reply */
-	if (status != TREQ)
-	    printk("cuda: state=awaiting_reply, status=%x\n", status);
+	/* System controller has reply data for us */
 	(void)in_8(&via[SR]);
-	out_8(&via[B], in_8(&via[B]) & ~TIP);
+	assert_TIP();
 	cuda_state = reading;
 	reply_ptr = current_req->reply;
 	reading_reply = 1;
 	break;
 
     case sent_first_byte:
-	if (status == TREQ + TIP + SR_OUT) {
+	if (TREQ_asserted(status)) {
 	    /* collision */
 	    out_8(&via[ACR], in_8(&via[ACR]) & ~SR_OUT);
 	    (void)in_8(&via[SR]);
-	    out_8(&via[B], in_8(&via[B]) | TIP | TACK);
+	    negate_TIP_and_TACK();
 	    cuda_state = idle;
+	    /* Egret does not raise an "aborted" interrupt */
+	    if (mcu_is_egret)
+		goto idle_state;
 	} else {
-	    /* assert status == TIP + SR_OUT */
-	    if (status != TIP + SR_OUT)
-		printk("cuda: state=sent_first_byte status=%x\n", status);
-	    out_8(&via[SR], current_req->data[1]);
-	    out_8(&via[B], in_8(&via[B]) ^ TACK);
-	    data_index = 2;
+	    out_8(&via[SR], current_req->data[data_index++]);
+	    toggle_TACK();
+	    if (mcu_is_egret)
+		assert_TACK();
 	    cuda_state = sending;
 	}
 	break;
@@ -521,7 +635,7 @@ cuda_interrupt(int irq, void *arg)
 	if (data_index >= req->nbytes) {
 	    out_8(&via[ACR], in_8(&via[ACR]) & ~SR_OUT);
 	    (void)in_8(&via[SR]);
-	    out_8(&via[B], in_8(&via[B]) | TACK | TIP);
+	    negate_TIP_and_TACK();
 	    req->sent = 1;
 	    if (req->reply_expected) {
 		cuda_state = awaiting_reply;
@@ -534,26 +648,37 @@ cuda_interrupt(int irq, void *arg)
 	    }
 	} else {
 	    out_8(&via[SR], req->data[data_index++]);
-	    out_8(&via[B], in_8(&via[B]) ^ TACK);
+	    toggle_TACK();
+	    if (mcu_is_egret)
+		assert_TACK();
 	}
 	break;
 
     case reading:
-	*reply_ptr++ = in_8(&via[SR]);
-	if (status == TIP) {
+	if (reading_reply ? ARRAY_FULL(current_req->reply, reply_ptr)
+	                  : ARRAY_FULL(cuda_rbuf, reply_ptr))
+	    (void)in_8(&via[SR]);
+	else
+	    *reply_ptr++ = in_8(&via[SR]);
+	if (!TREQ_asserted(status)) {
+	    if (mcu_is_egret)
+		assert_TACK();
 	    /* that's all folks */
-	    out_8(&via[B], in_8(&via[B]) | TACK | TIP);
+	    negate_TIP_and_TACK();
 	    cuda_state = read_done;
+	    /* Egret does not raise a "read done" interrupt */
+	    if (mcu_is_egret)
+		goto read_done_state;
 	} else {
-	    /* assert status == TIP | TREQ */
-	    if (status != TIP + TREQ)
-		printk("cuda: state=reading status=%x\n", status);
-	    out_8(&via[B], in_8(&via[B]) ^ TACK);
+	    toggle_TACK();
+	    if (mcu_is_egret)
+		negate_TACK();
 	}
 	break;
 
     case read_done:
 	(void)in_8(&via[SR]);
+read_done_state:
 	if (reading_reply) {
 	    req = current_req;
 	    req->reply_len = reply_ptr - req->reply;
@@ -570,6 +695,7 @@ cuda_interrupt(int irq, void *arg)
 	    }
 	    current_req = req->next;
 	    complete = 1;
+	    reading_reply = 0;
 	} else {
 	    /* This is tricky. We must break the spinlock to call
 	     * cuda_input. However, doing so means we might get
@@ -581,21 +707,19 @@ cuda_interrupt(int irq, void *arg)
 	    ibuf_len = reply_ptr - cuda_rbuf;
 	    memcpy(ibuf, cuda_rbuf, ibuf_len);
 	}
-	if (status == TREQ) {
-	    out_8(&via[B], in_8(&via[B]) & ~TIP);
+	reply_ptr = cuda_rbuf;
+	cuda_state = idle;
+	cuda_start();
+	if (cuda_state == idle && TREQ_asserted(in_8(&via[B]))) {
+	    assert_TIP();
 	    cuda_state = reading;
-	    reply_ptr = cuda_rbuf;
-	    reading_reply = 0;
-	} else {
-	    cuda_state = idle;
-	    cuda_start();
 	}
 	break;
 
     default:
-	printk("cuda_interrupt: unknown cuda_state %d?\n", cuda_state);
+	pr_err("cuda_interrupt: unknown cuda_state %d?\n", cuda_state);
     }
-    spin_unlock(&cuda_lock);
+    spin_unlock_irqrestore(&cuda_lock, flags);
     if (complete && req) {
     	void (*done)(struct adb_request *) = req->done;
     	mb();
@@ -614,8 +738,6 @@ cuda_interrupt(int irq, void *arg)
 static void
 cuda_input(unsigned char *buf, int nb)
 {
-    int i;
-
     switch (buf[0]) {
     case ADB_PACKET:
 #ifdef CONFIG_XMON
@@ -632,10 +754,14 @@ cuda_input(unsigned char *buf, int nb)
 #endif /* CONFIG_ADB */
 	break;
 
+    case TIMER_PACKET:
+	/* Egret sends these periodically. Might be useful as a 'heartbeat'
+	 * to trigger a recovery for the VIA shift register errata.
+	 */
+	break;
+
     default:
-	printk("data from cuda (%d bytes):", nb);
-	for (i = 0; i < nb; ++i)
-	    printk(" %.2x", buf[i]);
-	printk("\n");
+	print_hex_dump(KERN_INFO, "cuda_input: ", DUMP_PREFIX_NONE, 32, 1,
+	               buf, nb, false);
     }
 }
diff --git a/drivers/macintosh/via-maciisi.c b/drivers/macintosh/via-maciisi.c
deleted file mode 100644
index 34d02a91b29f..000000000000
--- a/drivers/macintosh/via-maciisi.c
+++ /dev/null
@@ -1,677 +0,0 @@
-/*
- * Device driver for the IIsi-style ADB on some Mac LC and II-class machines
- *
- * Based on via-cuda.c and via-macii.c, as well as the original
- * adb-bus.c, which in turn is somewhat influenced by (but uses no
- * code from) the NetBSD HWDIRECT ADB code.  Original IIsi driver work
- * was done by Robert Thompson and integrated into the old style
- * driver by Michael Schmitz.
- *
- * Original sources (c) Alan Cox, Paul Mackerras, and others.
- *
- * Rewritten for Unified ADB by David Huggins-Daines <dhd@debian.org>
- * 
- * 7/13/2000- extensive changes by Andrew McPherson <andrew@macduff.dhs.org>
- * Works about 30% of the time now.
- */
-
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <linux/kernel.h>
-#include <linux/adb.h>
-#include <linux/cuda.h>
-#include <linux/delay.h>
-#include <linux/interrupt.h>
-#include <asm/macintosh.h>
-#include <asm/macints.h>
-#include <asm/mac_via.h>
-
-static volatile unsigned char *via;
-
-/* VIA registers - spaced 0x200 bytes apart - only the ones we actually use */
-#define RS		0x200		/* skip between registers */
-#define B		0		/* B-side data */
-#define A		RS		/* A-side data */
-#define DIRB		(2*RS)		/* B-side direction (1=output) */
-#define DIRA		(3*RS)		/* A-side direction (1=output) */
-#define SR		(10*RS)		/* Shift register */
-#define ACR		(11*RS)		/* Auxiliary control register */
-#define IFR		(13*RS)		/* Interrupt flag register */
-#define IER		(14*RS)		/* Interrupt enable register */
-
-/* Bits in B data register: all active low */
-#define TREQ		0x08		/* Transfer request (input) */
-#define TACK		0x10		/* Transfer acknowledge (output) */
-#define TIP		0x20		/* Transfer in progress (output) */
-#define ST_MASK		0x30		/* mask for selecting ADB state bits */
-
-/* Bits in ACR */
-#define SR_CTRL		0x1c		/* Shift register control bits */
-#define SR_EXT		0x0c		/* Shift on external clock */
-#define SR_OUT		0x10		/* Shift out if 1 */
-
-/* Bits in IFR and IER */
-#define IER_SET		0x80		/* set bits in IER */
-#define IER_CLR		0		/* clear bits in IER */
-#define SR_INT		0x04		/* Shift register full/empty */
-#define SR_DATA		0x08		/* Shift register data */
-#define SR_CLOCK	0x10		/* Shift register clock */
-
-#define ADB_DELAY 150
-
-#undef DEBUG_MACIISI_ADB
-
-static struct adb_request* current_req;
-static struct adb_request* last_req;
-static unsigned char maciisi_rbuf[16];
-static unsigned char *reply_ptr;
-static int data_index;
-static int reading_reply;
-static int reply_len;
-static int tmp;
-static int need_sync;
-
-static enum maciisi_state {
-    idle,
-    sending,
-    reading,
-} maciisi_state;
-
-static int maciisi_probe(void);
-static int maciisi_init(void);
-static int maciisi_send_request(struct adb_request* req, int sync);
-static void maciisi_sync(struct adb_request *req);
-static int maciisi_write(struct adb_request* req);
-static irqreturn_t maciisi_interrupt(int irq, void* arg);
-static void maciisi_input(unsigned char *buf, int nb);
-static int maciisi_init_via(void);
-static void maciisi_poll(void);
-static int maciisi_start(void);
-
-struct adb_driver via_maciisi_driver = {
-	"Mac IIsi",
-	maciisi_probe,
-	maciisi_init,
-	maciisi_send_request,
-	NULL, /* maciisi_adb_autopoll, */
-	maciisi_poll,
-	NULL /* maciisi_reset_adb_bus */
-};
-
-static int
-maciisi_probe(void)
-{
-	if (macintosh_config->adb_type != MAC_ADB_IISI)
-		return -ENODEV;
-
-	via = via1;
-	return 0;
-}
-
-static int
-maciisi_init(void)
-{
-	int err;
-
-	if (via == NULL)
-		return -ENODEV;
-
-	if ((err = maciisi_init_via())) {
-		printk(KERN_ERR "maciisi_init: maciisi_init_via() failed, code %d\n", err);
-		via = NULL;
-		return err;
-	}
-
-	if (request_irq(IRQ_MAC_ADB, maciisi_interrupt, 0, "ADB",
-			maciisi_interrupt)) {
-		printk(KERN_ERR "maciisi_init: can't get irq %d\n", IRQ_MAC_ADB);
-		return -EAGAIN;
-	}
-
-	printk("adb: Mac IIsi driver v0.2 for Unified ADB.\n");
-	return 0;
-}
-
-/* Flush data from the ADB controller */
-static void
-maciisi_stfu(void)
-{
-	int status = via[B] & (TIP|TREQ);
-
-	if (status & TREQ) {
-#ifdef DEBUG_MACIISI_ADB
-		printk (KERN_DEBUG "maciisi_stfu called with TREQ high!\n");
-#endif
-		return;
-	}
-	
-	udelay(ADB_DELAY);
-	via[ACR] &= ~SR_OUT;
-	via[IER] = IER_CLR | SR_INT;
-
-	udelay(ADB_DELAY);
-
-	status = via[B] & (TIP|TREQ);
-
-	if (!(status & TREQ))
-	{
-		via[B] |= TIP;
-
-		while(1)
-		{
-			int poll_timeout = ADB_DELAY * 5;
-			/* Poll for SR interrupt */
-			while (!(via[IFR] & SR_INT) && poll_timeout-- > 0)
-				status = via[B] & (TIP|TREQ);
-
-			tmp = via[SR]; /* Clear shift register */
-#ifdef DEBUG_MACIISI_ADB
-			printk(KERN_DEBUG "maciisi_stfu: status %x timeout %d data %x\n",
-			       status, poll_timeout, tmp);
-#endif	
-			if(via[B] & TREQ)
-				break;
-	
-			/* ACK on-off */
-			via[B] |= TACK;
-			udelay(ADB_DELAY);
-			via[B] &= ~TACK;
-		}
-
-		/* end frame */
-		via[B] &= ~TIP;
-		udelay(ADB_DELAY);
-	}
-
-	via[IER] = IER_SET | SR_INT;	
-}
-
-/* All specifically VIA-related initialization goes here */
-static int
-maciisi_init_via(void)
-{
-	int	i;
-	
-	/* Set the lines up. We want TREQ as input TACK|TIP as output */
-	via[DIRB] = (via[DIRB] | TACK | TIP) & ~TREQ;
-	/* Shift register on input */
-	via[ACR]  = (via[ACR] & ~SR_CTRL) | SR_EXT;
-#ifdef DEBUG_MACIISI_ADB
-	printk(KERN_DEBUG "maciisi_init_via: initial status %x\n", via[B] & (TIP|TREQ));
-#endif
-	/* Wipe any pending data and int */
-	tmp = via[SR];
-	/* Enable keyboard interrupts */
-	via[IER] = IER_SET | SR_INT;
-	/* Set initial state: idle */
-	via[B] &= ~(TACK|TIP);
-	/* Clear interrupt bit */
-	via[IFR] = SR_INT;
-
-	for(i = 0; i < 60; i++) {
-		udelay(ADB_DELAY);
-		maciisi_stfu();
-		udelay(ADB_DELAY);
-		if(via[B] & TREQ)
-			break;
-	}
-	if (i == 60)
-		printk(KERN_ERR "maciisi_init_via: bus jam?\n");
-
-	maciisi_state = idle;
-	need_sync = 0;
-
-	return 0;
-}
-
-/* Send a request, possibly waiting for a reply */
-static int
-maciisi_send_request(struct adb_request* req, int sync)
-{
-	int i;
-
-#ifdef DEBUG_MACIISI_ADB
-	static int dump_packet = 0;
-#endif
-
-	if (via == NULL) {
-		req->complete = 1;
-		return -ENXIO;
-	}
-
-#ifdef DEBUG_MACIISI_ADB
-	if (dump_packet) {
-		printk(KERN_DEBUG "maciisi_send_request:");
-		for (i = 0; i < req->nbytes; i++) {
-			printk(" %.2x", req->data[i]);
-		}
-		printk(" sync %d\n", sync);
-	}
-#endif
-
-	req->reply_expected = 1;
-	
-	i = maciisi_write(req);
-	if (i)
-	{
-		/* Normally, if a packet requires syncing, that happens at the end of
-		 * maciisi_send_request. But if the transfer fails, it will be restarted
-		 * by maciisi_interrupt(). We use need_sync to tell maciisi_interrupt
-		 * when to sync a packet that it sends out.
-		 * 
-		 * Suggestions on a better way to do this are welcome.
-		 */
-		if(i == -EBUSY && sync)
-			need_sync = 1;
-		else
-			need_sync = 0;
-		return i;
-	}
-	if(sync)
-		maciisi_sync(req);
-	
-	return 0;
-}
-
-/* Poll the ADB chip until the request completes */
-static void maciisi_sync(struct adb_request *req)
-{
-	int count = 0; 
-
-#ifdef DEBUG_MACIISI_ADB
-	printk(KERN_DEBUG "maciisi_sync called\n");
-#endif
-
-	/* If for some reason the ADB chip shuts up on us, we want to avoid an endless loop. */
-	while (!req->complete && count++ < 50) {
-		maciisi_poll();
-	}
-	/* This could be BAD... when the ADB controller doesn't respond
-	 * for this long, it's probably not coming back :-( */
-	if (count > 50) /* Hopefully shouldn't happen */
-		printk(KERN_ERR "maciisi_send_request: poll timed out!\n");
-}
-
-int
-maciisi_request(struct adb_request *req, void (*done)(struct adb_request *),
-	    int nbytes, ...)
-{
-	va_list list;
-	int i;
-
-	req->nbytes = nbytes;
-	req->done = done;
-	req->reply_expected = 0;
-	va_start(list, nbytes);
-	for (i = 0; i < nbytes; i++)
-		req->data[i++] = va_arg(list, int);
-	va_end(list);
-
-	return maciisi_send_request(req, 1);
-}
-
-/* Enqueue a request, and run the queue if possible */
-static int
-maciisi_write(struct adb_request* req)
-{
-	unsigned long flags;
-	int i;
-
-	/* We will accept CUDA packets - the VIA sends them to us, so
-           it figures that we should be able to send them to it */
-	if (req->nbytes < 2 || req->data[0] > CUDA_PACKET) {
-		printk(KERN_ERR "maciisi_write: packet too small or not an ADB or CUDA packet\n");
-		req->complete = 1;
-		return -EINVAL;
-	}
-	req->next = NULL;
-	req->sent = 0;
-	req->complete = 0;
-	req->reply_len = 0;
-	
-	local_irq_save(flags);
-
-	if (current_req) {
-		last_req->next = req;
-		last_req = req;
-	} else {
-		current_req = req;
-		last_req = req;
-	}
-	if (maciisi_state == idle)
-	{
-		i = maciisi_start();
-		if(i != 0)
-		{
-			local_irq_restore(flags);
-			return i;
-		}
-	}
-	else
-	{
-#ifdef DEBUG_MACIISI_ADB
-		printk(KERN_DEBUG "maciisi_write: would start, but state is %d\n", maciisi_state);
-#endif
-		local_irq_restore(flags);
-		return -EBUSY;
-	}
-
-	local_irq_restore(flags);
-
-	return 0;
-}
-
-static int
-maciisi_start(void)
-{
-	struct adb_request* req;
-	int status;
-
-#ifdef DEBUG_MACIISI_ADB
-	status = via[B] & (TIP | TREQ);
-
-	printk(KERN_DEBUG "maciisi_start called, state=%d, status=%x, ifr=%x\n", maciisi_state, status, via[IFR]);
-#endif
-
-	if (maciisi_state != idle) {
-		/* shouldn't happen */
-		printk(KERN_ERR "maciisi_start: maciisi_start called when driver busy!\n");
-		return -EBUSY;
-	}
-
-	req = current_req;
-	if (req == NULL)
-		return -EINVAL;
-
-	status = via[B] & (TIP|TREQ);
-	if (!(status & TREQ)) {
-#ifdef DEBUG_MACIISI_ADB
-		printk(KERN_DEBUG "maciisi_start: bus busy - aborting\n");
-#endif
-		return -EBUSY;
-	}
-
-	/* Okay, send */
-#ifdef DEBUG_MACIISI_ADB
-	printk(KERN_DEBUG "maciisi_start: sending\n");
-#endif
-	/* Set state to active */
-	via[B] |= TIP;
-	/* ACK off */
-	via[B] &= ~TACK;
-	/* Delay */
-	udelay(ADB_DELAY);
-	/* Shift out and send */
-	via[ACR] |= SR_OUT;
-	via[SR] = req->data[0];
-	data_index = 1;
-	/* ACK on */
-	via[B] |= TACK;
-	maciisi_state = sending;
-
-	return 0;
-}
-
-void
-maciisi_poll(void)
-{
-	unsigned long flags;
-
-	local_irq_save(flags);
-	if (via[IFR] & SR_INT) {
-		maciisi_interrupt(0, NULL);
-	}
-	else /* avoid calling this function too quickly in a loop */
-		udelay(ADB_DELAY);
-
-	local_irq_restore(flags);
-}
-
-/* Shift register interrupt - this is *supposed* to mean that the
-   register is either full or empty. In practice, I have no idea what
-   it means :( */
-static irqreturn_t
-maciisi_interrupt(int irq, void* arg)
-{
-	int status;
-	struct adb_request *req;
-#ifdef DEBUG_MACIISI_ADB
-	static int dump_reply = 0;
-#endif
-	int i;
-	unsigned long flags;
-
-	local_irq_save(flags);
-
-	status = via[B] & (TIP|TREQ);
-#ifdef DEBUG_MACIISI_ADB
-	printk(KERN_DEBUG "state %d status %x ifr %x\n", maciisi_state, status, via[IFR]);
-#endif
-
-	if (!(via[IFR] & SR_INT)) {
-		/* Shouldn't happen, we hope */
-		printk(KERN_ERR "maciisi_interrupt: called without interrupt flag set\n");
-		local_irq_restore(flags);
-		return IRQ_NONE;
-	}
-
-	/* Clear the interrupt */
-	/* via[IFR] = SR_INT; */
-
- switch_start:
-	switch (maciisi_state) {
-	case idle:
-		if (status & TIP)
-			printk(KERN_ERR "maciisi_interrupt: state is idle but TIP asserted!\n");
-
-		if(!reading_reply)
-			udelay(ADB_DELAY);
-		/* Shift in */
-		via[ACR] &= ~SR_OUT;
- 		/* Signal start of frame */
-		via[B] |= TIP;
-		/* Clear the interrupt (throw this value on the floor, it's useless) */
-		tmp = via[SR];
-		/* ACK adb chip, high-low */
-		via[B] |= TACK;
-		udelay(ADB_DELAY);
-		via[B] &= ~TACK;
-		reply_len = 0;
-		maciisi_state = reading;
-		if (reading_reply) {
-			reply_ptr = current_req->reply;
-		} else {
-			reply_ptr = maciisi_rbuf;
-		}
-		break;
-
-	case sending:
-		/* via[SR]; */
-		/* Set ACK off */
-		via[B] &= ~TACK;
-		req = current_req;
-
-		if (!(status & TREQ)) {
-			/* collision */
-			printk(KERN_ERR "maciisi_interrupt: send collision\n");
-			/* Set idle and input */
-			via[ACR] &= ~SR_OUT;
-			tmp = via[SR];
-			via[B] &= ~TIP;
-			/* Must re-send */
-			reading_reply = 0;
-			reply_len = 0;
-			maciisi_state = idle;
-			udelay(ADB_DELAY);
-			/* process this now, because the IFR has been cleared */
-			goto switch_start;
-		}
-
-		udelay(ADB_DELAY);
-
-		if (data_index >= req->nbytes) {
-			/* Sent the whole packet, put the bus back in idle state */
-			/* Shift in, we are about to read a reply (hopefully) */
-			via[ACR] &= ~SR_OUT;
-			tmp = via[SR];
-			/* End of frame */
-			via[B] &= ~TIP;
-			req->sent = 1;
-			maciisi_state = idle;
-			if (req->reply_expected) {
-				/* Note: only set this once we've
-                                   successfully sent the packet */
-				reading_reply = 1;
-			} else {
-				current_req = req->next;
-				if (req->done)
-					(*req->done)(req);
-				/* Do any queued requests now */
-				i = maciisi_start();
-				if(i == 0 && need_sync) {
-					/* Packet needs to be synced */
-					maciisi_sync(current_req);
-				}
-				if(i != -EBUSY)
-					need_sync = 0;
-			}
-		} else {
-			/* Sending more stuff */
-			/* Shift out */
-			via[ACR] |= SR_OUT;
-			/* Write */
-			via[SR] = req->data[data_index++];
-			/* Signal 'byte ready' */
-			via[B] |= TACK;
-		}
-		break;
-
-	case reading:
-		/* Shift in */
-		/* via[ACR] &= ~SR_OUT; */ /* Not in 2.2 */
-		if (reply_len++ > 16) {
-			printk(KERN_ERR "maciisi_interrupt: reply too long, aborting read\n");
-			via[B] |= TACK;
-			udelay(ADB_DELAY);
-			via[B] &= ~(TACK|TIP);
-			maciisi_state = idle;
-			i = maciisi_start();
-			if(i == 0 && need_sync) {
-				/* Packet needs to be synced */
-				maciisi_sync(current_req);
-			}
-			if(i != -EBUSY)
-				need_sync = 0;
-			break;
-		}
-		/* Read data */
-		*reply_ptr++ = via[SR];
-		status = via[B] & (TIP|TREQ);
-		/* ACK on/off */
-		via[B] |= TACK;
-		udelay(ADB_DELAY);
-		via[B] &= ~TACK;	
-		if (!(status & TREQ))
-			break; /* more stuff to deal with */
-		
-		/* end of frame */
-		via[B] &= ~TIP;
-		tmp = via[SR]; /* That's what happens in 2.2 */
-		udelay(ADB_DELAY); /* Give controller time to recover */
-
-		/* end of packet, deal with it */
-		if (reading_reply) {
-			req = current_req;
-			req->reply_len = reply_ptr - req->reply;
-			if (req->data[0] == ADB_PACKET) {
-				/* Have to adjust the reply from ADB commands */
-				if (req->reply_len <= 2 || (req->reply[1] & 2) != 0) {
-					/* the 0x2 bit indicates no response */
-					req->reply_len = 0;
-				} else {
-					/* leave just the command and result bytes in the reply */
-					req->reply_len -= 2;
-					memmove(req->reply, req->reply + 2, req->reply_len);
-				}
-			}
-#ifdef DEBUG_MACIISI_ADB
-			if (dump_reply) {
-				int i;
-				printk(KERN_DEBUG "maciisi_interrupt: reply is ");
-				for (i = 0; i < req->reply_len; ++i)
-					printk(" %.2x", req->reply[i]);
-				printk("\n");
-			}
-#endif
-			req->complete = 1;
-			current_req = req->next;
-			if (req->done)
-				(*req->done)(req);
-			/* Obviously, we got it */
-			reading_reply = 0;
-		} else {
-			maciisi_input(maciisi_rbuf, reply_ptr - maciisi_rbuf);
-		}
-		maciisi_state = idle;
-		status = via[B] & (TIP|TREQ);
-		if (!(status & TREQ)) {
-			/* Timeout?! More likely, another packet coming in already */
-#ifdef DEBUG_MACIISI_ADB
-			printk(KERN_DEBUG "extra data after packet: status %x ifr %x\n",
-			       status, via[IFR]);
-#endif
-#if 0
-			udelay(ADB_DELAY);
-			via[B] |= TIP;
-
-			maciisi_state = reading;
-			reading_reply = 0;
-			reply_ptr = maciisi_rbuf;
-#else
-			/* Process the packet now */
-			reading_reply = 0;
-			goto switch_start;
-#endif
-			/* We used to do this... but the controller might actually have data for us */
-			/* maciisi_stfu(); */
-		}
-		else {
-			/* Do any queued requests now if possible */
-			i = maciisi_start();
-			if(i == 0 && need_sync) {
-				/* Packet needs to be synced */
-				maciisi_sync(current_req);
-			}
-			if(i != -EBUSY)
-				need_sync = 0;
-		}
-		break;
-
-	default:
-		printk("maciisi_interrupt: unknown maciisi_state %d?\n", maciisi_state);
-	}
-	local_irq_restore(flags);
-	return IRQ_HANDLED;
-}
-
-static void
-maciisi_input(unsigned char *buf, int nb)
-{
-#ifdef DEBUG_MACIISI_ADB
-    int i;
-#endif
-
-    switch (buf[0]) {
-    case ADB_PACKET:
-	    adb_input(buf+2, nb-2, buf[1] & 0x40);
-	    break;
-    default:
-#ifdef DEBUG_MACIISI_ADB
-	    printk(KERN_DEBUG "data from IIsi ADB (%d bytes):", nb);
-	    for (i = 0; i < nb; ++i)
-		    printk(" %.2x", buf[i]);
-	    printk("\n");
-#endif
-	    break;
-    }
-}