Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 532 insertions, 0 deletions

diff --git a/drivers/isdn/hisax/elsa_cs.c b/drivers/isdn/hisax/elsa_cs.c
new file mode 100644
index 000000000000..bfc013225f46
--- /dev/null
+++ b/drivers/isdn/hisax/elsa_cs.c
@@ -0,0 +1,532 @@
+/*======================================================================
+
+    An elsa_cs PCMCIA client driver
+
+    This driver is for the Elsa PCM ISDN Cards, i.e. the MicroLink
+
+
+    The contents of this file are subject to the Mozilla Public
+    License Version 1.1 (the "License"); you may not use this file
+    except in compliance with the License. You may obtain a copy of
+    the License at http://www.mozilla.org/MPL/
+
+    Software distributed under the License is distributed on an "AS
+    IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+    implied. See the License for the specific language governing
+    rights and limitations under the License.
+
+    The initial developer of the original code is David A. Hinds
+    <dahinds@users.sourceforge.net>.  Portions created by David A. Hinds
+    are Copyright (C) 1999 David A. Hinds.  All Rights Reserved.
+
+    Modifications from dummy_cs.c are Copyright (C) 1999-2001 Klaus
+    Lichtenwalder <Lichtenwalder@ACM.org>. All Rights Reserved.
+
+    Alternatively, the contents of this file may be used under the
+    terms of the GNU General Public License version 2 (the "GPL"), in
+    which case the provisions of the GPL are applicable instead of the
+    above.  If you wish to allow the use of your version of this file
+    only under the terms of the GPL and not to allow others to use
+    your version of this file under the MPL, indicate your decision
+    by deleting the provisions above and replace them with the notice
+    and other provisions required by the GPL.  If you do not delete
+    the provisions above, a recipient may use your version of this
+    file under either the MPL or the GPL.
+
+======================================================================*/
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/ptrace.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/timer.h>
+#include <linux/ioport.h>
+#include <asm/io.h>
+#include <asm/system.h>
+
+#include <pcmcia/version.h>
+#include <pcmcia/cs_types.h>
+#include <pcmcia/cs.h>
+#include <pcmcia/cistpl.h>
+#include <pcmcia/cisreg.h>
+#include <pcmcia/ds.h>
+#include "hisax_cfg.h"
+
+MODULE_DESCRIPTION("ISDN4Linux: PCMCIA client driver for Elsa PCM cards");
+MODULE_AUTHOR("Klaus Lichtenwalder");
+MODULE_LICENSE("Dual MPL/GPL");
+
+/*
+   All the PCMCIA modules use PCMCIA_DEBUG to control debugging.  If
+   you do not define PCMCIA_DEBUG at all, all the debug code will be
+   left out.  If you compile with PCMCIA_DEBUG=0, the debug code will
+   be present but disabled -- but it can then be enabled for specific
+   modules at load time with a 'pc_debug=#' option to insmod.
+*/
+
+#ifdef PCMCIA_DEBUG
+static int pc_debug = PCMCIA_DEBUG;
+module_param(pc_debug, int, 0);
+#define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args);
+static char *version =
+"elsa_cs.c $Revision: 1.2.2.4 $ $Date: 2004/01/25 15:07:06 $ (K.Lichtenwalder)";
+#else
+#define DEBUG(n, args...)
+#endif
+
+/*====================================================================*/
+
+/* Parameters that can be set with 'insmod' */
+
+static int protocol = 2;        /* EURO-ISDN Default */
+module_param(protocol, int, 0);
+
+/*====================================================================*/
+
+/*
+   The event() function is this driver's Card Services event handler.
+   It will be called by Card Services when an appropriate card status
+   event is received.  The config() and release() entry points are
+   used to configure or release a socket, in response to card insertion
+   and ejection events.  They are invoked from the elsa_cs event
+   handler.
+*/
+
+static void elsa_cs_config(dev_link_t *link);
+static void elsa_cs_release(dev_link_t *link);
+static int elsa_cs_event(event_t event, int priority,
+                          event_callback_args_t *args);
+
+/*
+   The attach() and detach() entry points are used to create and destroy
+   "instances" of the driver, where each instance represents everything
+   needed to manage one actual PCMCIA card.
+*/
+
+static dev_link_t *elsa_cs_attach(void);
+static void elsa_cs_detach(dev_link_t *);
+
+/*
+   The dev_info variable is the "key" that is used to match up this
+   device driver with appropriate cards, through the card configuration
+   database.
+*/
+
+static dev_info_t dev_info = "elsa_cs";
+
+/*
+   A linked list of "instances" of the elsa_cs device.  Each actual
+   PCMCIA card corresponds to one device instance, and is described
+   by one dev_link_t structure (defined in ds.h).
+
+   You may not want to use a linked list for this -- for example, the
+   memory card driver uses an array of dev_link_t pointers, where minor
+   device numbers are used to derive the corresponding array index.
+*/
+
+static dev_link_t *dev_list = NULL;
+
+/*
+   A dev_link_t structure has fields for most things that are needed
+   to keep track of a socket, but there will usually be some device
+   specific information that also needs to be kept track of.  The
+   'priv' pointer in a dev_link_t structure can be used to point to
+   a device-specific private data structure, like this.
+
+   To simplify the data structure handling, we actually include the
+   dev_link_t structure in the device's private data structure.
+
+   A driver needs to provide a dev_node_t structure for each device
+   on a card.  In some cases, there is only one device per card (for
+   example, ethernet cards, modems).  In other cases, there may be
+   many actual or logical devices (SCSI adapters, memory cards with
+   multiple partitions).  The dev_node_t structures need to be kept
+   in a linked list starting at the 'dev' field of a dev_link_t
+   structure.  We allocate them in the card's private data structure,
+   because they generally shouldn't be allocated dynamically.
+   In this case, we also provide a flag to indicate if a device is
+   "stopped" due to a power management event, or card ejection.  The
+   device IO routines can use a flag like this to throttle IO to a
+   card that is not ready to accept it.
+*/
+
+typedef struct local_info_t {
+    dev_link_t          link;
+    dev_node_t          node;
+    int                 busy;
+    int			cardnr;
+} local_info_t;
+
+/*======================================================================
+
+    elsa_cs_attach() creates an "instance" of the driver, allocatingx
+    local data structures for one device.  The device is registered
+    with Card Services.
+
+    The dev_link structure is initialized, but we don't actually
+    configure the card at this point -- we wait until we receive a
+    card insertion event.
+
+======================================================================*/
+
+static dev_link_t *elsa_cs_attach(void)
+{
+    client_reg_t client_reg;
+    dev_link_t *link;
+    local_info_t *local;
+    int ret;
+
+    DEBUG(0, "elsa_cs_attach()\n");
+
+    /* Allocate space for private device-specific data */
+    local = kmalloc(sizeof(local_info_t), GFP_KERNEL);
+    if (!local) return NULL;
+    memset(local, 0, sizeof(local_info_t));
+    local->cardnr = -1;
+    link = &local->link; link->priv = local;
+
+    /* Interrupt setup */
+    link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING|IRQ_FIRST_SHARED;
+    link->irq.IRQInfo1 = IRQ_LEVEL_ID|IRQ_SHARE_ID;
+    link->irq.Handler = NULL;
+
+    /*
+      General socket configuration defaults can go here.  In this
+      client, we assume very little, and rely on the CIS for almost
+      everything.  In most clients, many details (i.e., number, sizes,
+      and attributes of IO windows) are fixed by the nature of the
+      device, and can be hard-wired here.
+    */
+    link->io.NumPorts1 = 8;
+    link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
+    link->io.IOAddrLines = 3;
+
+    link->conf.Attributes = CONF_ENABLE_IRQ;
+    link->conf.Vcc = 50;
+    link->conf.IntType = INT_MEMORY_AND_IO;
+
+    /* Register with Card Services */
+    link->next = dev_list;
+    dev_list = link;
+    client_reg.dev_info = &dev_info;
+    client_reg.EventMask =
+        CS_EVENT_CARD_INSERTION | CS_EVENT_CARD_REMOVAL |
+        CS_EVENT_RESET_PHYSICAL | CS_EVENT_CARD_RESET |
+        CS_EVENT_PM_SUSPEND | CS_EVENT_PM_RESUME;
+    client_reg.event_handler = &elsa_cs_event;
+    client_reg.Version = 0x0210;
+    client_reg.event_callback_args.client_data = link;
+    ret = pcmcia_register_client(&link->handle, &client_reg);
+    if (ret != CS_SUCCESS) {
+        cs_error(link->handle, RegisterClient, ret);
+        elsa_cs_detach(link);
+        return NULL;
+    }
+
+    return link;
+} /* elsa_cs_attach */
+
+/*======================================================================
+
+    This deletes a driver "instance".  The device is de-registered
+    with Card Services.  If it has been released, all local data
+    structures are freed.  Otherwise, the structures will be freed
+    when the device is released.
+
+======================================================================*/
+
+static void elsa_cs_detach(dev_link_t *link)
+{
+    dev_link_t **linkp;
+    local_info_t *info = link->priv;
+    int ret;
+
+    DEBUG(0, "elsa_cs_detach(0x%p)\n", link);
+
+    /* Locate device structure */
+    for (linkp = &dev_list; *linkp; linkp = &(*linkp)->next)
+        if (*linkp == link) break;
+    if (*linkp == NULL)
+        return;
+
+    if (link->state & DEV_CONFIG)
+        elsa_cs_release(link);
+
+    /* Break the link with Card Services */
+    if (link->handle) {
+        ret = pcmcia_deregister_client(link->handle);
+	if (ret != CS_SUCCESS)
+	    cs_error(link->handle, DeregisterClient, ret);
+    }
+
+    /* Unlink device structure and free it */
+    *linkp = link->next;
+    kfree(info);
+
+} /* elsa_cs_detach */
+
+/*======================================================================
+
+    elsa_cs_config() is scheduled to run after a CARD_INSERTION event
+    is received, to configure the PCMCIA socket, and to make the
+    device available to the system.
+
+======================================================================*/
+static int get_tuple(client_handle_t handle, tuple_t *tuple,
+                     cisparse_t *parse)
+{
+    int i = pcmcia_get_tuple_data(handle, tuple);
+    if (i != CS_SUCCESS) return i;
+    return pcmcia_parse_tuple(handle, tuple, parse);
+}
+
+static int first_tuple(client_handle_t handle, tuple_t *tuple,
+                     cisparse_t *parse)
+{
+    int i = pcmcia_get_first_tuple(handle, tuple);
+    if (i != CS_SUCCESS) return i;
+    return get_tuple(handle, tuple, parse);
+}
+
+static int next_tuple(client_handle_t handle, tuple_t *tuple,
+                     cisparse_t *parse)
+{
+    int i = pcmcia_get_next_tuple(handle, tuple);
+    if (i != CS_SUCCESS) return i;
+    return get_tuple(handle, tuple, parse);
+}
+
+static void elsa_cs_config(dev_link_t *link)
+{
+    client_handle_t handle;
+    tuple_t tuple;
+    cisparse_t parse;
+    local_info_t *dev;
+    int i, j, last_fn;
+    u_short buf[128];
+    cistpl_cftable_entry_t *cf = &parse.cftable_entry;
+    IsdnCard_t icard;
+
+    DEBUG(0, "elsa_config(0x%p)\n", link);
+    handle = link->handle;
+    dev = link->priv;
+
+    /*
+       This reads the card's CONFIG tuple to find its configuration
+       registers.
+    */
+    tuple.DesiredTuple = CISTPL_CONFIG;
+    tuple.TupleData = (cisdata_t *)buf;
+    tuple.TupleDataMax = 255;
+    tuple.TupleOffset = 0;
+    tuple.Attributes = 0;
+    i = first_tuple(handle, &tuple, &parse);
+    if (i != CS_SUCCESS) {
+        last_fn = ParseTuple;
+	goto cs_failed;
+    }
+    link->conf.ConfigBase = parse.config.base;
+    link->conf.Present = parse.config.rmask[0];
+
+    /* Configure card */
+    link->state |= DEV_CONFIG;
+
+    tuple.TupleData = (cisdata_t *)buf;
+    tuple.TupleOffset = 0; tuple.TupleDataMax = 255;
+    tuple.Attributes = 0;
+    tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
+    i = first_tuple(handle, &tuple, &parse);
+    while (i == CS_SUCCESS) {
+        if ( (cf->io.nwin > 0) && cf->io.win[0].base) {
+            printk(KERN_INFO "(elsa_cs: looks like the 96 model)\n");
+            link->conf.ConfigIndex = cf->index;
+            link->io.BasePort1 = cf->io.win[0].base;
+            i = pcmcia_request_io(link->handle, &link->io);
+            if (i == CS_SUCCESS) break;
+        } else {
+          printk(KERN_INFO "(elsa_cs: looks like the 97 model)\n");
+          link->conf.ConfigIndex = cf->index;
+          for (i = 0, j = 0x2f0; j > 0x100; j -= 0x10) {
+            link->io.BasePort1 = j;
+            i = pcmcia_request_io(link->handle, &link->io);
+            if (i == CS_SUCCESS) break;
+          }
+          break;
+        }
+        i = next_tuple(handle, &tuple, &parse);
+    }
+
+    if (i != CS_SUCCESS) {
+	last_fn = RequestIO;
+	goto cs_failed;
+    }
+
+    i = pcmcia_request_irq(link->handle, &link->irq);
+    if (i != CS_SUCCESS) {
+        link->irq.AssignedIRQ = 0;
+	last_fn = RequestIRQ;
+        goto cs_failed;
+    }
+
+    i = pcmcia_request_configuration(link->handle, &link->conf);
+    if (i != CS_SUCCESS) {
+      last_fn = RequestConfiguration;
+      goto cs_failed;
+    }
+
+    /* At this point, the dev_node_t structure(s) should be
+       initialized and arranged in a linked list at link->dev. *//*  */
+    sprintf(dev->node.dev_name, "elsa");
+    dev->node.major = dev->node.minor = 0x0;
+
+    link->dev = &dev->node;
+
+    /* Finally, report what we've done */
+    printk(KERN_INFO "%s: index 0x%02x: Vcc %d.%d",
+           dev->node.dev_name, link->conf.ConfigIndex,
+           link->conf.Vcc/10, link->conf.Vcc%10);
+    if (link->conf.Vpp1)
+        printk(", Vpp %d.%d", link->conf.Vpp1/10, link->conf.Vpp1%10);
+    if (link->conf.Attributes & CONF_ENABLE_IRQ)
+        printk(", irq %d", link->irq.AssignedIRQ);
+    if (link->io.NumPorts1)
+        printk(", io 0x%04x-0x%04x", link->io.BasePort1,
+               link->io.BasePort1+link->io.NumPorts1-1);
+    if (link->io.NumPorts2)
+        printk(" & 0x%04x-0x%04x", link->io.BasePort2,
+               link->io.BasePort2+link->io.NumPorts2-1);
+    printk("\n");
+
+    link->state &= ~DEV_CONFIG_PENDING;
+
+    icard.para[0] = link->irq.AssignedIRQ;
+    icard.para[1] = link->io.BasePort1;
+    icard.protocol = protocol;
+    icard.typ = ISDN_CTYPE_ELSA_PCMCIA;
+    
+    i = hisax_init_pcmcia(link, &(((local_info_t*)link->priv)->busy), &icard);
+    if (i < 0) {
+    	printk(KERN_ERR "elsa_cs: failed to initialize Elsa PCMCIA %d at i/o %#x\n",
+    		i, link->io.BasePort1);
+    	elsa_cs_release(link);
+    } else
+    	((local_info_t*)link->priv)->cardnr = i;
+
+    return;
+cs_failed:
+    cs_error(link->handle, last_fn, i);
+    elsa_cs_release(link);
+} /* elsa_cs_config */
+
+/*======================================================================
+
+    After a card is removed, elsa_cs_release() will unregister the net
+    device, and release the PCMCIA configuration.  If the device is
+    still open, this will be postponed until it is closed.
+
+======================================================================*/
+
+static void elsa_cs_release(dev_link_t *link)
+{
+    local_info_t *local = link->priv;
+
+    DEBUG(0, "elsa_cs_release(0x%p)\n", link);
+
+    if (local) {
+    	if (local->cardnr >= 0) {
+    	    /* no unregister function with hisax */
+	    HiSax_closecard(local->cardnr);
+	}
+    }
+    /* Unlink the device chain */
+    link->dev = NULL;
+
+    /* Don't bother checking to see if these succeed or not */
+    if (link->win)
+        pcmcia_release_window(link->win);
+    pcmcia_release_configuration(link->handle);
+    pcmcia_release_io(link->handle, &link->io);
+    pcmcia_release_irq(link->handle, &link->irq);
+    link->state &= ~DEV_CONFIG;
+} /* elsa_cs_release */
+
+/*======================================================================
+
+    The card status event handler.  Mostly, this schedules other
+    stuff to run after an event is received.  A CARD_REMOVAL event
+    also sets some flags to discourage the net drivers from trying
+    to talk to the card any more.
+
+    When a CARD_REMOVAL event is received, we immediately set a flag
+    to block future accesses to this device.  All the functions that
+    actually access the device should check this flag to make sure
+    the card is still present.
+
+======================================================================*/
+
+static int elsa_cs_event(event_t event, int priority,
+                          event_callback_args_t *args)
+{
+    dev_link_t *link = args->client_data;
+    local_info_t *dev = link->priv;
+
+    DEBUG(1, "elsa_cs_event(%d)\n", event);
+
+    switch (event) {
+    case CS_EVENT_CARD_REMOVAL:
+        link->state &= ~DEV_PRESENT;
+        if (link->state & DEV_CONFIG) {
+            ((local_info_t*)link->priv)->busy = 1;
+	    elsa_cs_release(link);
+        }
+        break;
+    case CS_EVENT_CARD_INSERTION:
+        link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
+        elsa_cs_config(link);
+        break;
+    case CS_EVENT_PM_SUSPEND:
+        link->state |= DEV_SUSPEND;
+        /* Fall through... */
+    case CS_EVENT_RESET_PHYSICAL:
+        /* Mark the device as stopped, to block IO until later */
+        dev->busy = 1;
+        if (link->state & DEV_CONFIG)
+            pcmcia_release_configuration(link->handle);
+        break;
+    case CS_EVENT_PM_RESUME:
+        link->state &= ~DEV_SUSPEND;
+        /* Fall through... */
+    case CS_EVENT_CARD_RESET:
+        if (link->state & DEV_CONFIG)
+            pcmcia_request_configuration(link->handle, &link->conf);
+        dev->busy = 0;
+        break;
+    }
+    return 0;
+} /* elsa_cs_event */
+
+static struct pcmcia_driver elsa_cs_driver = {
+	.owner		= THIS_MODULE,
+	.drv		= {
+		.name	= "elsa_cs",
+	},
+	.attach		= elsa_cs_attach,
+	.detach		= elsa_cs_detach,
+};
+
+static int __init init_elsa_cs(void)
+{
+	return pcmcia_register_driver(&elsa_cs_driver);
+}
+
+static void __exit exit_elsa_cs(void)
+{
+	pcmcia_unregister_driver(&elsa_cs_driver);
+	BUG_ON(dev_list != NULL);
+}
+
+module_init(init_elsa_cs);
+module_exit(exit_elsa_cs);