Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM 32-bit SoC platform updates from Olof Johansson:
 "Most of the SoC updates in this cycle are cleanups and moves to more
  modern infrastructure:

   - Davinci was moved to common clock framework

   - OMAP1-based Amstrad E3 "Superphone" saw a bunch of cleanups to the
     keyboard interface (bitbanged AT keyboard via GPIO).

   - Removal of some stale code for Renesas platforms

   - Power management improvements for i.MX6LL"

* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (112 commits)
  ARM: uniphier: select RESET_CONTROLLER
  arm64: uniphier: select RESET_CONTROLLER
  ARM: uniphier: remove empty Makefile
  ARM: exynos: Clear global variable on init error path
  ARM: exynos: Remove outdated maintainer information
  ARM: shmobile: Always enable ARCH_TIMER on SoCs with A7 and/or A15
  ARM: shmobile: r8a7779: hide unused r8a7779_platform_cpu_kill
  soc: r9a06g032: don't build SMP files for non-SMP config
  ARM: shmobile: Add the R9A06G032 SMP enabler driver
  ARM: at91: pm: configure wakeup sources for ULP1 mode
  ARM: at91: pm: add PMC fast startup registers defines
  ARM: at91: pm: Add ULP1 mode support
  ARM: at91: pm: Use ULP0 naming instead of slow clock
  ARM: hisi: handle of_iomap and fix missing of_node_put
  ARM: hisi: check of_iomap and fix missing of_node_put
  ARM: hisi: fix error handling and missing of_node_put
  ARM: mx5: Set the DBGEN bit in ARM_GPC register
  ARM: imx51: Configure M4IF to avoid visual artifacts
  ARM: imx: call imx6sx_cpuidle_init() conditionally for 6sll
  ARM: imx: fix i.MX6SLL build
  ...

1 files changed, 101 insertions, 97 deletions

diff --git a/drivers/input/serio/ams_delta_serio.c b/drivers/input/serio/ams_delta_serio.c
index 3df501c3421b..f8663d7891f2 100644
--- a/drivers/input/serio/ams_delta_serio.c
+++ b/drivers/input/serio/ams_delta_serio.c
@@ -20,32 +20,33 @@
  * However, when used with the E3 mailboard that producecs non-standard
  * scancodes, a custom key table must be prepared and loaded from userspace.
  */
-#include <linux/gpio.h>
 #include <linux/irq.h>
+#include <linux/platform_data/ams-delta-fiq.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
 #include <linux/serio.h>
 #include <linux/slab.h>
 #include <linux/module.h>
 
-#include <asm/mach-types.h>
-#include <mach/board-ams-delta.h>
-
-#include <mach/ams-delta-fiq.h>
+#define DRIVER_NAME	"ams-delta-serio"
 
 MODULE_AUTHOR("Matt Callow");
 MODULE_DESCRIPTION("AMS Delta (E3) keyboard port driver");
 MODULE_LICENSE("GPL");
 
-static struct serio *ams_delta_serio;
+struct ams_delta_serio {
+	struct serio *serio;
+	struct regulator *vcc;
+	unsigned int *fiq_buffer;
+};
 
-static int check_data(int data)
+static int check_data(struct serio *serio, int data)
 {
 	int i, parity = 0;
 
 	/* check valid stop bit */
 	if (!(data & 0x400)) {
-		dev_warn(&ams_delta_serio->dev,
-				"invalid stop bit, data=0x%X\n",
-				data);
+		dev_warn(&serio->dev, "invalid stop bit, data=0x%X\n", data);
 		return SERIO_FRAME;
 	}
 	/* calculate the parity */
@@ -55,9 +56,9 @@ static int check_data(int data)
 	}
 	/* it should be odd */
 	if (!(parity & 0x01)) {
-		dev_warn(&ams_delta_serio->dev,
-				"parity check failed, data=0x%X parity=0x%X\n",
-				data, parity);
+		dev_warn(&serio->dev,
+			 "parity check failed, data=0x%X parity=0x%X\n", data,
+			 parity);
 		return SERIO_PARITY;
 	}
 	return 0;
@@ -65,127 +66,130 @@ static int check_data(int data)
 
 static irqreturn_t ams_delta_serio_interrupt(int irq, void *dev_id)
 {
-	int *circ_buff = &fiq_buffer[FIQ_CIRC_BUFF];
+	struct ams_delta_serio *priv = dev_id;
+	int *circ_buff = &priv->fiq_buffer[FIQ_CIRC_BUFF];
 	int data, dfl;
 	u8 scancode;
 
-	fiq_buffer[FIQ_IRQ_PEND] = 0;
+	priv->fiq_buffer[FIQ_IRQ_PEND] = 0;
 
 	/*
 	 * Read data from the circular buffer, check it
 	 * and then pass it on the serio
 	 */
-	while (fiq_buffer[FIQ_KEYS_CNT] > 0) {
+	while (priv->fiq_buffer[FIQ_KEYS_CNT] > 0) {
 
-		data = circ_buff[fiq_buffer[FIQ_HEAD_OFFSET]++];
-		fiq_buffer[FIQ_KEYS_CNT]--;
-		if (fiq_buffer[FIQ_HEAD_OFFSET] == fiq_buffer[FIQ_BUF_LEN])
-			fiq_buffer[FIQ_HEAD_OFFSET] = 0;
+		data = circ_buff[priv->fiq_buffer[FIQ_HEAD_OFFSET]++];
+		priv->fiq_buffer[FIQ_KEYS_CNT]--;
+		if (priv->fiq_buffer[FIQ_HEAD_OFFSET] ==
+		    priv->fiq_buffer[FIQ_BUF_LEN])
+			priv->fiq_buffer[FIQ_HEAD_OFFSET] = 0;
 
-		dfl = check_data(data);
+		dfl = check_data(priv->serio, data);
 		scancode = (u8) (data >> 1) & 0xFF;
-		serio_interrupt(ams_delta_serio, scancode, dfl);
+		serio_interrupt(priv->serio, scancode, dfl);
 	}
 	return IRQ_HANDLED;
 }
 
 static int ams_delta_serio_open(struct serio *serio)
 {
-	/* enable keyboard */
-	gpio_set_value(AMS_DELTA_GPIO_PIN_KEYBRD_PWR, 1);
+	struct ams_delta_serio *priv = serio->port_data;
 
-	return 0;
+	/* enable keyboard */
+	return regulator_enable(priv->vcc);
 }
 
 static void ams_delta_serio_close(struct serio *serio)
 {
+	struct ams_delta_serio *priv = serio->port_data;
+
 	/* disable keyboard */
-	gpio_set_value(AMS_DELTA_GPIO_PIN_KEYBRD_PWR, 0);
+	regulator_disable(priv->vcc);
 }
 
-static const struct gpio ams_delta_gpios[] __initconst_or_module = {
-	{
-		.gpio	= AMS_DELTA_GPIO_PIN_KEYBRD_DATA,
-		.flags	= GPIOF_DIR_IN,
-		.label	= "serio-data",
-	},
-	{
-		.gpio	= AMS_DELTA_GPIO_PIN_KEYBRD_CLK,
-		.flags	= GPIOF_DIR_IN,
-		.label	= "serio-clock",
-	},
-	{
-		.gpio	= AMS_DELTA_GPIO_PIN_KEYBRD_PWR,
-		.flags	= GPIOF_OUT_INIT_LOW,
-		.label	= "serio-power",
-	},
-	{
-		.gpio	= AMS_DELTA_GPIO_PIN_KEYBRD_DATAOUT,
-		.flags	= GPIOF_OUT_INIT_LOW,
-		.label	= "serio-dataout",
-	},
-};
-
-static int __init ams_delta_serio_init(void)
+static int ams_delta_serio_init(struct platform_device *pdev)
 {
-	int err;
-
-	if (!machine_is_ams_delta())
-		return -ENODEV;
+	struct ams_delta_serio *priv;
+	struct serio *serio;
+	int irq, err;
 
-	ams_delta_serio = kzalloc(sizeof(struct serio), GFP_KERNEL);
-	if (!ams_delta_serio)
+	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
 		return -ENOMEM;
 
-	ams_delta_serio->id.type = SERIO_8042;
-	ams_delta_serio->open = ams_delta_serio_open;
-	ams_delta_serio->close = ams_delta_serio_close;
-	strlcpy(ams_delta_serio->name, "AMS DELTA keyboard adapter",
-			sizeof(ams_delta_serio->name));
-	strlcpy(ams_delta_serio->phys, "GPIO/serio0",
-			sizeof(ams_delta_serio->phys));
-
-	err = gpio_request_array(ams_delta_gpios,
-				ARRAY_SIZE(ams_delta_gpios));
-	if (err) {
-		pr_err("ams_delta_serio: Couldn't request gpio pins\n");
-		goto serio;
+	priv->fiq_buffer = pdev->dev.platform_data;
+	if (!priv->fiq_buffer)
+		return -EINVAL;
+
+	priv->vcc = devm_regulator_get(&pdev->dev, "vcc");
+	if (IS_ERR(priv->vcc)) {
+		err = PTR_ERR(priv->vcc);
+		dev_err(&pdev->dev, "regulator request failed (%d)\n", err);
+		/*
+		 * When running on a non-dt platform and requested regulator
+		 * is not available, devm_regulator_get() never returns
+		 * -EPROBE_DEFER as it is not able to justify if the regulator
+		 * may still appear later.  On the other hand, the board can
+		 * still set full constriants flag at late_initcall in order
+		 * to instruct devm_regulator_get() to returnn a dummy one
+		 * if sufficient.  Hence, if we get -ENODEV here, let's convert
+		 * it to -EPROBE_DEFER and wait for the board to decide or
+		 * let Deferred Probe infrastructure handle this error.
+		 */
+		if (err == -ENODEV)
+			err = -EPROBE_DEFER;
+		return err;
 	}
 
-	err = request_irq(gpio_to_irq(AMS_DELTA_GPIO_PIN_KEYBRD_CLK),
-			ams_delta_serio_interrupt, IRQ_TYPE_EDGE_RISING,
-			"ams-delta-serio", 0);
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return -ENXIO;
+
+	err = devm_request_irq(&pdev->dev, irq, ams_delta_serio_interrupt,
+			       IRQ_TYPE_EDGE_RISING, DRIVER_NAME, priv);
 	if (err < 0) {
-		pr_err("ams_delta_serio: couldn't request gpio interrupt %d\n",
-				gpio_to_irq(AMS_DELTA_GPIO_PIN_KEYBRD_CLK));
-		goto gpio;
+		dev_err(&pdev->dev, "IRQ request failed (%d)\n", err);
+		return err;
 	}
-	/*
-	 * Since GPIO register handling for keyboard clock pin is performed
-	 * at FIQ level, switch back from edge to simple interrupt handler
-	 * to avoid bad interaction.
-	 */
-	irq_set_handler(gpio_to_irq(AMS_DELTA_GPIO_PIN_KEYBRD_CLK),
-			handle_simple_irq);
 
-	serio_register_port(ams_delta_serio);
-	dev_info(&ams_delta_serio->dev, "%s\n", ams_delta_serio->name);
+	serio = kzalloc(sizeof(*serio), GFP_KERNEL);
+	if (!serio)
+		return -ENOMEM;
+
+	priv->serio = serio;
+
+	serio->id.type = SERIO_8042;
+	serio->open = ams_delta_serio_open;
+	serio->close = ams_delta_serio_close;
+	strlcpy(serio->name, "AMS DELTA keyboard adapter", sizeof(serio->name));
+	strlcpy(serio->phys, dev_name(&pdev->dev), sizeof(serio->phys));
+	serio->dev.parent = &pdev->dev;
+	serio->port_data = priv;
+
+	serio_register_port(serio);
+
+	platform_set_drvdata(pdev, priv);
+
+	dev_info(&serio->dev, "%s\n", serio->name);
 
 	return 0;
-gpio:
-	gpio_free_array(ams_delta_gpios,
-			ARRAY_SIZE(ams_delta_gpios));
-serio:
-	kfree(ams_delta_serio);
-	return err;
 }
-module_init(ams_delta_serio_init);
 
-static void __exit ams_delta_serio_exit(void)
+static int ams_delta_serio_exit(struct platform_device *pdev)
 {
-	serio_unregister_port(ams_delta_serio);
-	free_irq(gpio_to_irq(AMS_DELTA_GPIO_PIN_KEYBRD_CLK), 0);
-	gpio_free_array(ams_delta_gpios,
-			ARRAY_SIZE(ams_delta_gpios));
+	struct ams_delta_serio *priv = platform_get_drvdata(pdev);
+
+	serio_unregister_port(priv->serio);
+
+	return 0;
 }
-module_exit(ams_delta_serio_exit);
+
+static struct platform_driver ams_delta_serio_driver = {
+	.probe	= ams_delta_serio_init,
+	.remove	= ams_delta_serio_exit,
+	.driver	= {
+		.name	= DRIVER_NAME
+	},
+};
+module_platform_driver(ams_delta_serio_driver);