Merge 5.1-rc6 into staging-next

We want the fixes in here as well as this resolves an iio driver merge
issue.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

15 files changed, 178 insertions, 95 deletions

diff --git a/drivers/iio/accel/kxcjk-1013.c b/drivers/iio/accel/kxcjk-1013.c
index a9e98fdb8b23..a5c9d3d8613f 100644
--- a/drivers/iio/accel/kxcjk-1013.c
+++ b/drivers/iio/accel/kxcjk-1013.c
@@ -1437,6 +1437,8 @@ static int kxcjk1013_resume(struct device *dev)
 
 	mutex_lock(&data->mutex);
 	ret = kxcjk1013_set_mode(data, OPERATION);
+	if (ret == 0)
+		ret = kxcjk1013_set_range(data, data->range);
 	mutex_unlock(&data->mutex);
 
 	return ret;
diff --git a/drivers/iio/adc/ad_sigma_delta.c b/drivers/iio/adc/ad_sigma_delta.c
index af6cbc683214..a4310600a853 100644
--- a/drivers/iio/adc/ad_sigma_delta.c
+++ b/drivers/iio/adc/ad_sigma_delta.c
@@ -121,6 +121,7 @@ static int ad_sd_read_reg_raw(struct ad_sigma_delta *sigma_delta,
 	if (sigma_delta->info->has_registers) {
 		data[0] = reg << sigma_delta->info->addr_shift;
 		data[0] |= sigma_delta->info->read_mask;
+		data[0] |= sigma_delta->comm;
 		spi_message_add_tail(&t[0], &m);
 	}
 	spi_message_add_tail(&t[1], &m);
diff --git a/drivers/iio/adc/at91_adc.c b/drivers/iio/adc/at91_adc.c
index 75d2f73582a3..596841a3c4db 100644
--- a/drivers/iio/adc/at91_adc.c
+++ b/drivers/iio/adc/at91_adc.c
@@ -704,23 +704,29 @@ static int at91_adc_read_raw(struct iio_dev *idev,
 		ret = wait_event_interruptible_timeout(st->wq_data_avail,
 						       st->done,
 						       msecs_to_jiffies(1000));
-		if (ret == 0)
-			ret = -ETIMEDOUT;
-		if (ret < 0) {
-			mutex_unlock(&st->lock);
-			return ret;
-		}
-
-		*val = st->last_value;
 
+		/* Disable interrupts, regardless if adc conversion was
+		 * successful or not
+		 */
 		at91_adc_writel(st, AT91_ADC_CHDR,
 				AT91_ADC_CH(chan->channel));
 		at91_adc_writel(st, AT91_ADC_IDR, BIT(chan->channel));
 
-		st->last_value = 0;
-		st->done = false;
+		if (ret > 0) {
+			/* a valid conversion took place */
+			*val = st->last_value;
+			st->last_value = 0;
+			st->done = false;
+			ret = IIO_VAL_INT;
+		} else if (ret == 0) {
+			/* conversion timeout */
+			dev_err(&idev->dev, "ADC Channel %d timeout.\n",
+				chan->channel);
+			ret = -ETIMEDOUT;
+		}
+
 		mutex_unlock(&st->lock);
-		return IIO_VAL_INT;
+		return ret;
 
 	case IIO_CHAN_INFO_SCALE:
 		*val = st->vref_mv;
diff --git a/drivers/iio/adc/xilinx-xadc-core.c b/drivers/iio/adc/xilinx-xadc-core.c
index b13c61539d46..6401ca7a9a20 100644
--- a/drivers/iio/adc/xilinx-xadc-core.c
+++ b/drivers/iio/adc/xilinx-xadc-core.c
@@ -1292,6 +1292,7 @@ static int xadc_probe(struct platform_device *pdev)
 
 err_free_irq:
 	free_irq(xadc->irq, indio_dev);
+	cancel_delayed_work_sync(&xadc->zynq_unmask_work);
 err_clk_disable_unprepare:
 	clk_disable_unprepare(xadc->clk);
 err_free_samplerate_trigger:
@@ -1321,8 +1322,8 @@ static int xadc_remove(struct platform_device *pdev)
 		iio_triggered_buffer_cleanup(indio_dev);
 	}
 	free_irq(xadc->irq, indio_dev);
+	cancel_delayed_work_sync(&xadc->zynq_unmask_work);
 	clk_disable_unprepare(xadc->clk);
-	cancel_delayed_work(&xadc->zynq_unmask_work);
 	kfree(xadc->data);
 	kfree(indio_dev->channels);
 
diff --git a/drivers/iio/chemical/Kconfig b/drivers/iio/chemical/Kconfig
index d5fb436f5ae6..5dc11a359444 100644
--- a/drivers/iio/chemical/Kconfig
+++ b/drivers/iio/chemical/Kconfig
@@ -64,6 +64,7 @@ config IAQCORE
 config PMS7003
 	tristate "Plantower PMS7003 particulate matter sensor"
 	depends on SERIAL_DEV_BUS
+	select IIO_TRIGGERED_BUFFER
 	help
 	  Say Y here to build support for the Plantower PMS7003 particulate
 	  matter sensor.
@@ -71,6 +72,19 @@ config PMS7003
 	  To compile this driver as a module, choose M here: the module will
 	  be called pms7003.
 
+config SENSIRION_SGP30
+	tristate "Sensirion SGPxx gas sensors"
+	depends on I2C
+	select CRC8
+	help
+	  Say Y here to build I2C interface support for the following
+	  Sensirion SGP gas sensors:
+	    * SGP30 gas sensor
+	    * SGPC3 low power gas sensor
+
+	  To compile this driver as module, choose M here: the
+	  module will be called sgp30.
+
 config SPS30
 	tristate "SPS30 particulate matter sensor"
 	depends on I2C
diff --git a/drivers/iio/chemical/bme680.h b/drivers/iio/chemical/bme680.h
index 0ae89b87e2d6..4edc5d21cb9f 100644
--- a/drivers/iio/chemical/bme680.h
+++ b/drivers/iio/chemical/bme680.h
@@ -2,11 +2,9 @@
 #ifndef BME680_H_
 #define BME680_H_
 
-#define BME680_REG_CHIP_I2C_ID			0xD0
-#define BME680_REG_CHIP_SPI_ID			0x50
+#define BME680_REG_CHIP_ID			0xD0
 #define   BME680_CHIP_ID_VAL			0x61
-#define BME680_REG_SOFT_RESET_I2C		0xE0
-#define BME680_REG_SOFT_RESET_SPI		0x60
+#define BME680_REG_SOFT_RESET			0xE0
 #define   BME680_CMD_SOFTRESET			0xB6
 #define BME680_REG_STATUS			0x73
 #define   BME680_SPI_MEM_PAGE_BIT		BIT(4)
diff --git a/drivers/iio/chemical/bme680_core.c b/drivers/iio/chemical/bme680_core.c
index 70c1fe4366f4..ccde4c65ff93 100644
--- a/drivers/iio/chemical/bme680_core.c
+++ b/drivers/iio/chemical/bme680_core.c
@@ -63,9 +63,23 @@ struct bme680_data {
 	s32 t_fine;
 };
 
+static const struct regmap_range bme680_volatile_ranges[] = {
+	regmap_reg_range(BME680_REG_MEAS_STAT_0, BME680_REG_GAS_R_LSB),
+	regmap_reg_range(BME680_REG_STATUS, BME680_REG_STATUS),
+	regmap_reg_range(BME680_T2_LSB_REG, BME680_GH3_REG),
+};
+
+static const struct regmap_access_table bme680_volatile_table = {
+	.yes_ranges	= bme680_volatile_ranges,
+	.n_yes_ranges	= ARRAY_SIZE(bme680_volatile_ranges),
+};
+
 const struct regmap_config bme680_regmap_config = {
 	.reg_bits = 8,
 	.val_bits = 8,
+	.max_register = 0xef,
+	.volatile_table = &bme680_volatile_table,
+	.cache_type = REGCACHE_RBTREE,
 };
 EXPORT_SYMBOL(bme680_regmap_config);
 
@@ -316,6 +330,10 @@ static s16 bme680_compensate_temp(struct bme680_data *data,
 	s64 var1, var2, var3;
 	s16 calc_temp;
 
+	/* If the calibration is invalid, attempt to reload it */
+	if (!calib->par_t2)
+		bme680_read_calib(data, calib);
+
 	var1 = (adc_temp >> 3) - (calib->par_t1 << 1);
 	var2 = (var1 * calib->par_t2) >> 11;
 	var3 = ((var1 >> 1) * (var1 >> 1)) >> 12;
@@ -583,8 +601,7 @@ static int bme680_gas_config(struct bme680_data *data)
 	return ret;
 }
 
-static int bme680_read_temp(struct bme680_data *data,
-			    int *val, int *val2)
+static int bme680_read_temp(struct bme680_data *data, int *val)
 {
 	struct device *dev = regmap_get_device(data->regmap);
 	int ret;
@@ -617,10 +634,9 @@ static int bme680_read_temp(struct bme680_data *data,
 	 * compensate_press/compensate_humid to get compensated
 	 * pressure/humidity readings.
 	 */
-	if (val && val2) {
-		*val = comp_temp;
-		*val2 = 100;
-		return IIO_VAL_FRACTIONAL;
+	if (val) {
+		*val = comp_temp * 10; /* Centidegrees to millidegrees */
+		return IIO_VAL_INT;
 	}
 
 	return ret;
@@ -635,7 +651,7 @@ static int bme680_read_press(struct bme680_data *data,
 	s32 adc_press;
 
 	/* Read and compensate temperature to get a reading of t_fine */
-	ret = bme680_read_temp(data, NULL, NULL);
+	ret = bme680_read_temp(data, NULL);
 	if (ret < 0)
 		return ret;
 
@@ -668,7 +684,7 @@ static int bme680_read_humid(struct bme680_data *data,
 	u32 comp_humidity;
 
 	/* Read and compensate temperature to get a reading of t_fine */
-	ret = bme680_read_temp(data, NULL, NULL);
+	ret = bme680_read_temp(data, NULL);
 	if (ret < 0)
 		return ret;
 
@@ -761,7 +777,7 @@ static int bme680_read_raw(struct iio_dev *indio_dev,
 	case IIO_CHAN_INFO_PROCESSED:
 		switch (chan->type) {
 		case IIO_TEMP:
-			return bme680_read_temp(data, val, val2);
+			return bme680_read_temp(data, val);
 		case IIO_PRESSURE:
 			return bme680_read_press(data, val, val2);
 		case IIO_HUMIDITYRELATIVE:
@@ -867,8 +883,28 @@ int bme680_core_probe(struct device *dev, struct regmap *regmap,
 {
 	struct iio_dev *indio_dev;
 	struct bme680_data *data;
+	unsigned int val;
 	int ret;
 
+	ret = regmap_write(regmap, BME680_REG_SOFT_RESET,
+			   BME680_CMD_SOFTRESET);
+	if (ret < 0) {
+		dev_err(dev, "Failed to reset chip\n");
+		return ret;
+	}
+
+	ret = regmap_read(regmap, BME680_REG_CHIP_ID, &val);
+	if (ret < 0) {
+		dev_err(dev, "Error reading chip ID\n");
+		return ret;
+	}
+
+	if (val != BME680_CHIP_ID_VAL) {
+		dev_err(dev, "Wrong chip ID, got %x expected %x\n",
+				val, BME680_CHIP_ID_VAL);
+		return -ENODEV;
+	}
+
 	indio_dev = devm_iio_device_alloc(dev, sizeof(*data));
 	if (!indio_dev)
 		return -ENOMEM;
diff --git a/drivers/iio/chemical/bme680_i2c.c b/drivers/iio/chemical/bme680_i2c.c
index b2f805b6b36a..de9c9e3d23ea 100644
--- a/drivers/iio/chemical/bme680_i2c.c
+++ b/drivers/iio/chemical/bme680_i2c.c
@@ -23,8 +23,6 @@ static int bme680_i2c_probe(struct i2c_client *client,
 {
 	struct regmap *regmap;
 	const char *name = NULL;
-	unsigned int val;
-	int ret;
 
 	regmap = devm_regmap_init_i2c(client, &bme680_regmap_config);
 	if (IS_ERR(regmap)) {
@@ -33,25 +31,6 @@ static int bme680_i2c_probe(struct i2c_client *client,
 		return PTR_ERR(regmap);
 	}
 
-	ret = regmap_write(regmap, BME680_REG_SOFT_RESET_I2C,
-			   BME680_CMD_SOFTRESET);
-	if (ret < 0) {
-		dev_err(&client->dev, "Failed to reset chip\n");
-		return ret;
-	}
-
-	ret = regmap_read(regmap, BME680_REG_CHIP_I2C_ID, &val);
-	if (ret < 0) {
-		dev_err(&client->dev, "Error reading I2C chip ID\n");
-		return ret;
-	}
-
-	if (val != BME680_CHIP_ID_VAL) {
-		dev_err(&client->dev, "Wrong chip ID, got %x expected %x\n",
-				val, BME680_CHIP_ID_VAL);
-		return -ENODEV;
-	}
-
 	if (id)
 		name = id->name;
 
diff --git a/drivers/iio/chemical/bme680_spi.c b/drivers/iio/chemical/bme680_spi.c
index d0b7bdd3f066..3b838068a7e4 100644
--- a/drivers/iio/chemical/bme680_spi.c
+++ b/drivers/iio/chemical/bme680_spi.c
@@ -12,28 +12,93 @@
 
 #include "bme680.h"
 
+struct bme680_spi_bus_context {
+	struct spi_device *spi;
+	u8 current_page;
+};
+
+/*
+ * In SPI mode there are only 7 address bits, a "page" register determines
+ * which part of the 8-bit range is active. This function looks at the address
+ * and writes the page selection bit if needed
+ */
+static int bme680_regmap_spi_select_page(
+	struct bme680_spi_bus_context *ctx, u8 reg)
+{
+	struct spi_device *spi = ctx->spi;
+	int ret;
+	u8 buf[2];
+	u8 page = (reg & 0x80) ? 0 : 1; /* Page "1" is low range */
+
+	if (page == ctx->current_page)
+		return 0;
+
+	/*
+	 * Data sheet claims we're only allowed to change bit 4, so we must do
+	 * a read-modify-write on each and every page select
+	 */
+	buf[0] = BME680_REG_STATUS;
+	ret = spi_write_then_read(spi, buf, 1, buf + 1, 1);
+	if (ret < 0) {
+		dev_err(&spi->dev, "failed to set page %u\n", page);
+		return ret;
+	}
+
+	buf[0] = BME680_REG_STATUS;
+	if (page)
+		buf[1] |= BME680_SPI_MEM_PAGE_BIT;
+	else
+		buf[1] &= ~BME680_SPI_MEM_PAGE_BIT;
+
+	ret = spi_write(spi, buf, 2);
+	if (ret < 0) {
+		dev_err(&spi->dev, "failed to set page %u\n", page);
+		return ret;
+	}
+
+	ctx->current_page = page;
+
+	return 0;
+}
+
 static int bme680_regmap_spi_write(void *context, const void *data,
 				   size_t count)
 {
-	struct spi_device *spi = context;
+	struct bme680_spi_bus_context *ctx = context;
+	struct spi_device *spi = ctx->spi;
+	int ret;
 	u8 buf[2];
 
 	memcpy(buf, data, 2);
+
+	ret = bme680_regmap_spi_select_page(ctx, buf[0]);
+	if (ret)
+		return ret;
+
 	/*
 	 * The SPI register address (= full register address without bit 7)
 	 * and the write command (bit7 = RW = '0')
 	 */
 	buf[0] &= ~0x80;
 
-	return spi_write_then_read(spi, buf, 2, NULL, 0);
+	return spi_write(spi, buf, 2);
 }
 
 static int bme680_regmap_spi_read(void *context, const void *reg,
 				  size_t reg_size, void *val, size_t val_size)
 {
-	struct spi_device *spi = context;
+	struct bme680_spi_bus_context *ctx = context;
+	struct spi_device *spi = ctx->spi;
+	int ret;
+	u8 addr = *(const u8 *)reg;
+
+	ret = bme680_regmap_spi_select_page(ctx, addr);
+	if (ret)
+		return ret;
 
-	return spi_write_then_read(spi, reg, reg_size, val, val_size);
+	addr |= 0x80; /* bit7 = RW = '1' */
+
+	return spi_write_then_read(spi, &addr, 1, val, val_size);
 }
 
 static struct regmap_bus bme680_regmap_bus = {
@@ -46,8 +111,8 @@ static struct regmap_bus bme680_regmap_bus = {
 static int bme680_spi_probe(struct spi_device *spi)
 {
 	const struct spi_device_id *id = spi_get_device_id(spi);
+	struct bme680_spi_bus_context *bus_context;
 	struct regmap *regmap;
-	unsigned int val;
 	int ret;
 
 	spi->bits_per_word = 8;
@@ -57,45 +122,21 @@ static int bme680_spi_probe(struct spi_device *spi)
 		return ret;
 	}
 
+	bus_context = devm_kzalloc(&spi->dev, sizeof(*bus_context), GFP_KERNEL);
+	if (!bus_context)
+		return -ENOMEM;
+
+	bus_context->spi = spi;
+	bus_context->current_page = 0xff; /* Undefined on warm boot */
+
 	regmap = devm_regmap_init(&spi->dev, &bme680_regmap_bus,
-				  &spi->dev, &bme680_regmap_config);
+				  bus_context, &bme680_regmap_config);
 	if (IS_ERR(regmap)) {
 		dev_err(&spi->dev, "Failed to register spi regmap %d\n",
 				(int)PTR_ERR(regmap));
 		return PTR_ERR(regmap);
 	}
 
-	ret = regmap_write(regmap, BME680_REG_SOFT_RESET_SPI,
-			   BME680_CMD_SOFTRESET);
-	if (ret < 0) {
-		dev_err(&spi->dev, "Failed to reset chip\n");
-		return ret;
-	}
-
-	/* after power-on reset, Page 0(0x80-0xFF) of spi_mem_page is active */
-	ret = regmap_read(regmap, BME680_REG_CHIP_SPI_ID, &val);
-	if (ret < 0) {
-		dev_err(&spi->dev, "Error reading SPI chip ID\n");
-		return ret;
-	}
-
-	if (val != BME680_CHIP_ID_VAL) {
-		dev_err(&spi->dev, "Wrong chip ID, got %x expected %x\n",
-				val, BME680_CHIP_ID_VAL);
-		return -ENODEV;
-	}
-	/*
-	 * select Page 1 of spi_mem_page to enable access to
-	 * to registers from address 0x00 to 0x7F.
-	 */
-	ret = regmap_write_bits(regmap, BME680_REG_STATUS,
-				BME680_SPI_MEM_PAGE_BIT,
-				BME680_SPI_MEM_PAGE_1_VAL);
-	if (ret < 0) {
-		dev_err(&spi->dev, "failed to set page 1 of spi_mem_page\n");
-		return ret;
-	}
-
 	return bme680_core_probe(&spi->dev, regmap, id->name);
 }
 
diff --git a/drivers/iio/common/cros_ec_sensors/cros_ec_sensors.c b/drivers/iio/common/cros_ec_sensors/cros_ec_sensors.c
index 2dafe49aeafd..17af4e0fd5f8 100644
--- a/drivers/iio/common/cros_ec_sensors/cros_ec_sensors.c
+++ b/drivers/iio/common/cros_ec_sensors/cros_ec_sensors.c
@@ -93,9 +93,10 @@ static int cros_ec_sensors_read(struct iio_dev *indio_dev,
 			 * Do not use IIO_DEGREE_TO_RAD to avoid precision
 			 * loss. Round to the nearest integer.
 			 */
-			*val = div_s64(val64 * 314159 + 9000000ULL, 1000);
-			*val2 = 18000 << (CROS_EC_SENSOR_BITS - 1);
-			ret = IIO_VAL_FRACTIONAL;
+			*val = 0;
+			*val2 = div_s64(val64 * 3141592653ULL,
+					180 << (CROS_EC_SENSOR_BITS - 1));
+			ret = IIO_VAL_INT_PLUS_NANO;
 			break;
 		case MOTIONSENSE_TYPE_MAG:
 			/*
diff --git a/drivers/iio/dac/mcp4725.c b/drivers/iio/dac/mcp4725.c
index 6d71fd905e29..c701a45469f6 100644
--- a/drivers/iio/dac/mcp4725.c
+++ b/drivers/iio/dac/mcp4725.c
@@ -92,6 +92,7 @@ static ssize_t mcp4725_store_eeprom(struct device *dev,
 
 	inoutbuf[0] = 0x60; /* write EEPROM */
 	inoutbuf[0] |= data->ref_mode << 3;
+	inoutbuf[0] |= data->powerdown ? ((data->powerdown_mode + 1) << 1) : 0;
 	inoutbuf[1] = data->dac_value >> 4;
 	inoutbuf[2] = (data->dac_value & 0xf) << 4;
 
diff --git a/drivers/iio/gyro/bmg160_core.c b/drivers/iio/gyro/bmg160_core.c
index e7b38adee39a..f26041e26c65 100644
--- a/drivers/iio/gyro/bmg160_core.c
+++ b/drivers/iio/gyro/bmg160_core.c
@@ -583,11 +583,10 @@ static int bmg160_read_raw(struct iio_dev *indio_dev,
 	case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY:
 		return bmg160_get_filter(data, val);
 	case IIO_CHAN_INFO_SCALE:
-		*val = 0;
 		switch (chan->type) {
 		case IIO_TEMP:
-			*val2 = 500000;
-			return IIO_VAL_INT_PLUS_MICRO;
+			*val = 500;
+			return IIO_VAL_INT;
 		case IIO_ANGL_VEL:
 		{
 			int i;
@@ -595,6 +594,7 @@ static int bmg160_read_raw(struct iio_dev *indio_dev,
 			for (i = 0; i < ARRAY_SIZE(bmg160_scale_table); ++i) {
 				if (bmg160_scale_table[i].dps_range ==
 							data->dps_range) {
+					*val = 0;
 					*val2 = bmg160_scale_table[i].scale;
 					return IIO_VAL_INT_PLUS_MICRO;
 				}
diff --git a/drivers/iio/gyro/mpu3050-core.c b/drivers/iio/gyro/mpu3050-core.c
index 8200e48f561b..85b7ac49c8d9 100644
--- a/drivers/iio/gyro/mpu3050-core.c
+++ b/drivers/iio/gyro/mpu3050-core.c
@@ -29,7 +29,8 @@
 
 #include "mpu3050.h"
 
-#define MPU3050_CHIP_ID		0x69
+#define MPU3050_CHIP_ID		0x68
+#define MPU3050_CHIP_ID_MASK	0x7E
 
 /*
  * Register map: anything suffixed *_H is a big-endian high byte and always
@@ -1175,8 +1176,9 @@ int mpu3050_common_probe(struct device *dev,
 		goto err_power_down;
 	}
 
-	if (val != MPU3050_CHIP_ID) {
-		dev_err(dev, "unsupported chip id %02x\n", (u8)val);
+	if ((val & MPU3050_CHIP_ID_MASK) != MPU3050_CHIP_ID) {
+		dev_err(dev, "unsupported chip id %02x\n",
+				(u8)(val & MPU3050_CHIP_ID_MASK));
 		ret = -ENODEV;
 		goto err_power_down;
 	}
diff --git a/drivers/iio/industrialio-buffer.c b/drivers/iio/industrialio-buffer.c
index 3c7e7380d1c3..4fa273002c03 100644
--- a/drivers/iio/industrialio-buffer.c
+++ b/drivers/iio/industrialio-buffer.c
@@ -320,7 +320,8 @@ static int iio_scan_mask_set(struct iio_dev *indio_dev,
 	const unsigned long *mask;
 	unsigned long *trialmask;
 
-	trialmask = bitmap_alloc(indio_dev->masklength, GFP_KERNEL);
+	trialmask = kcalloc(BITS_TO_LONGS(indio_dev->masklength),
+			    sizeof(*trialmask), GFP_KERNEL);
 	if (trialmask == NULL)
 		return -ENOMEM;
 	if (!indio_dev->masklength) {
diff --git a/drivers/iio/industrialio-core.c b/drivers/iio/industrialio-core.c
index f2ebca65f964..f5a4581302f4 100644
--- a/drivers/iio/industrialio-core.c
+++ b/drivers/iio/industrialio-core.c
@@ -1733,10 +1733,10 @@ EXPORT_SYMBOL(__iio_device_register);
  **/
 void iio_device_unregister(struct iio_dev *indio_dev)
 {
-	mutex_lock(&indio_dev->info_exist_lock);
-
 	cdev_device_del(&indio_dev->chrdev, &indio_dev->dev);
 
+	mutex_lock(&indio_dev->info_exist_lock);
+
 	iio_device_unregister_debugfs(indio_dev);
 
 	iio_disable_all_buffers(indio_dev);