diff options
author | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2017-09-25 10:58:22 +0200 |
---|---|---|
committer | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2017-09-25 10:58:22 +0200 |
commit | b2e312061c5e9f533c44487862dc405094bf250a (patch) | |
tree | 6e6d1fdfd04a926118a98bd0e366d54b2a2b5a28 /drivers/iio/trigger | |
parent | ec14121931a24f8d3678b8a9c408adee3b21d465 (diff) | |
parent | f790923f146140a261ad211e5baf75d169f16fb2 (diff) |
Merge tag 'iio-fixes-for-4.14a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus
Jonathan writes:
First round of IIO fixes for the 4.14 cycle
Note this includes fixes from recent merge window. As such the tree
is based on top of a prior staging/staging-next tree.
* iio core
- return and error for a failed read_reg debugfs call rather than
eating the error.
* ad7192
- Use the dedicated reset function in the ad_sigma_delta library
instead of an spi transfer with the data on the stack which
could cause problems with DMA.
* ad7793
- Implement a dedicate reset function in the ad_sigma_delta library
and use it to correctly reset this part.
* bme280
- ctrl_reg write must occur after any register writes
for updates to take effect.
* mcp320x
- negative voltage readout was broken.
- Fix an oops on module unload due to spi_set_drvdata not being called
in probe.
* st_magn
- Fix the data ready line configuration for the lis3mdl. It is not
configurable so the st_magn core was assuming it didn't exist
and so wasn't consuming interrupts resulting in an unhandled
interrupt.
* stm32-adc
- off by one error on max channels checking.
* stm32-timer
- preset should not be buffered - reorganising register writes avoids
this.
- fix a corner case in which write preset goes wrong when a timer is
used first as a trigger then as a counter with preset. Odd case but
you never know.
* ti-ads1015
- Fix setting of comparator polarity by fixing bitfield definition.
* twl4030
- Error path handling fix to cleanup in event of regulator
registration failure.
- Disable the vusb3v1 regulator correctly in error handling
- Don't paper over a regulator enable failure.
Diffstat (limited to 'drivers/iio/trigger')
-rw-r--r-- | drivers/iio/trigger/stm32-timer-trigger.c | 4 |
1 files changed, 3 insertions, 1 deletions
diff --git a/drivers/iio/trigger/stm32-timer-trigger.c b/drivers/iio/trigger/stm32-timer-trigger.c index 9b9053494daf..eb212f8c8879 100644 --- a/drivers/iio/trigger/stm32-timer-trigger.c +++ b/drivers/iio/trigger/stm32-timer-trigger.c @@ -174,6 +174,7 @@ static void stm32_timer_stop(struct stm32_timer_trigger *priv) clk_disable(priv->clk); /* Stop timer */ + regmap_update_bits(priv->regmap, TIM_CR1, TIM_CR1_ARPE, 0); regmap_update_bits(priv->regmap, TIM_CR1, TIM_CR1_CEN, 0); regmap_write(priv->regmap, TIM_PSC, 0); regmap_write(priv->regmap, TIM_ARR, 0); @@ -715,8 +716,9 @@ static ssize_t stm32_count_set_preset(struct iio_dev *indio_dev, if (ret) return ret; + /* TIMx_ARR register shouldn't be buffered (ARPE=0) */ + regmap_update_bits(priv->regmap, TIM_CR1, TIM_CR1_ARPE, 0); regmap_write(priv->regmap, TIM_ARR, preset); - regmap_update_bits(priv->regmap, TIM_CR1, TIM_CR1_ARPE, TIM_CR1_ARPE); return len; } |