diff options
| author | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2017-09-25 10:58:22 +0200 |
|---|---|---|
| committer | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2017-09-25 10:58:22 +0200 |
| commit | b2e312061c5e9f533c44487862dc405094bf250a (patch) | |
| tree | 6e6d1fdfd04a926118a98bd0e366d54b2a2b5a28 /drivers/iio/pressure/bmp280-core.c | |
| parent | ec14121931a24f8d3678b8a9c408adee3b21d465 (diff) | |
| parent | f790923f146140a261ad211e5baf75d169f16fb2 (diff) | |
Merge tag 'iio-fixes-for-4.14a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus
Jonathan writes:
First round of IIO fixes for the 4.14 cycle
Note this includes fixes from recent merge window. As such the tree
is based on top of a prior staging/staging-next tree.
* iio core
- return and error for a failed read_reg debugfs call rather than
eating the error.
* ad7192
- Use the dedicated reset function in the ad_sigma_delta library
instead of an spi transfer with the data on the stack which
could cause problems with DMA.
* ad7793
- Implement a dedicate reset function in the ad_sigma_delta library
and use it to correctly reset this part.
* bme280
- ctrl_reg write must occur after any register writes
for updates to take effect.
* mcp320x
- negative voltage readout was broken.
- Fix an oops on module unload due to spi_set_drvdata not being called
in probe.
* st_magn
- Fix the data ready line configuration for the lis3mdl. It is not
configurable so the st_magn core was assuming it didn't exist
and so wasn't consuming interrupts resulting in an unhandled
interrupt.
* stm32-adc
- off by one error on max channels checking.
* stm32-timer
- preset should not be buffered - reorganising register writes avoids
this.
- fix a corner case in which write preset goes wrong when a timer is
used first as a trigger then as a counter with preset. Odd case but
you never know.
* ti-ads1015
- Fix setting of comparator polarity by fixing bitfield definition.
* twl4030
- Error path handling fix to cleanup in event of regulator
registration failure.
- Disable the vusb3v1 regulator correctly in error handling
- Don't paper over a regulator enable failure.
Diffstat (limited to 'drivers/iio/pressure/bmp280-core.c')
| -rw-r--r-- | drivers/iio/pressure/bmp280-core.c | 2 |
1 files changed, 1 insertions, 1 deletions
diff --git a/drivers/iio/pressure/bmp280-core.c b/drivers/iio/pressure/bmp280-core.c index 0d2ea3ee371b..8f26428804a2 100644 --- a/drivers/iio/pressure/bmp280-core.c +++ b/drivers/iio/pressure/bmp280-core.c @@ -573,7 +573,7 @@ static int bmp280_chip_config(struct bmp280_data *data) u8 osrs = BMP280_OSRS_TEMP_X(data->oversampling_temp + 1) | BMP280_OSRS_PRESS_X(data->oversampling_press + 1); - ret = regmap_update_bits(data->regmap, BMP280_REG_CTRL_MEAS, + ret = regmap_write_bits(data->regmap, BMP280_REG_CTRL_MEAS, BMP280_OSRS_TEMP_MASK | BMP280_OSRS_PRESS_MASK | BMP280_MODE_MASK, |