diff options
author | Andy Shevchenko <andriy.shevchenko@linux.intel.com> | 2022-12-07 21:03:39 +0200 |
---|---|---|
committer | Jonathan Cameron <Jonathan.Cameron@huawei.com> | 2022-12-28 17:19:45 +0000 |
commit | 3c183534f2784484182e51c8019c1e9f0638ef8a (patch) | |
tree | 9f753348812d8f9dc0bf7b58c6bd53728a02c4c5 /drivers/iio/light | |
parent | 027641b52fe37b64af61025298ce160c8b9b7a73 (diff) |
iio: light: tsl2563: Use i2c_smbus_write_word_data() in tsl2563_configure()
Driver already uses the word accessors when it makes sense, but
in the tsl2563_configure(). Switch the latter to use word accessor.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Ferry Toth <ftoth@exalondelft.nl>
Link: https://lore.kernel.org/r/20221207190348.9347-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Diffstat (limited to 'drivers/iio/light')
-rw-r--r-- | drivers/iio/light/tsl2563.c | 52 |
1 files changed, 19 insertions, 33 deletions
diff --git a/drivers/iio/light/tsl2563.c b/drivers/iio/light/tsl2563.c index 71302ae864d9..d836c15ba777 100644 --- a/drivers/iio/light/tsl2563.c +++ b/drivers/iio/light/tsl2563.c @@ -49,16 +49,12 @@ #define TSL2563_REG_CTRL 0x00 #define TSL2563_REG_TIMING 0x01 -#define TSL2563_REG_LOWLOW 0x02 /* data0 low threshold, 2 bytes */ -#define TSL2563_REG_LOWHIGH 0x03 -#define TSL2563_REG_HIGHLOW 0x04 /* data0 high threshold, 2 bytes */ -#define TSL2563_REG_HIGHHIGH 0x05 +#define TSL2563_REG_LOW 0x02 /* data0 low threshold, 2 bytes */ +#define TSL2563_REG_HIGH 0x04 /* data0 high threshold, 2 bytes */ #define TSL2563_REG_INT 0x06 #define TSL2563_REG_ID 0x0a -#define TSL2563_REG_DATA0LOW 0x0c /* broadband sensor value, 2 bytes */ -#define TSL2563_REG_DATA0HIGH 0x0d -#define TSL2563_REG_DATA1LOW 0x0e /* infrared sensor value, 2 bytes */ -#define TSL2563_REG_DATA1HIGH 0x0f +#define TSL2563_REG_DATA0 0x0c /* broadband sensor value, 2 bytes */ +#define TSL2563_REG_DATA1 0x0e /* infrared sensor value, 2 bytes */ #define TSL2563_CMD_POWER_ON 0x03 #define TSL2563_CMD_POWER_OFF 0x00 @@ -161,24 +157,16 @@ static int tsl2563_configure(struct tsl2563_chip *chip) chip->gainlevel->gaintime); if (ret) goto error_ret; - ret = i2c_smbus_write_byte_data(chip->client, - TSL2563_CMD | TSL2563_REG_HIGHLOW, - chip->high_thres & 0xFF); - if (ret) - goto error_ret; - ret = i2c_smbus_write_byte_data(chip->client, - TSL2563_CMD | TSL2563_REG_HIGHHIGH, - (chip->high_thres >> 8) & 0xFF); + ret = i2c_smbus_write_word_data(chip->client, + TSL2563_CMD | TSL2563_REG_HIGH, + chip->high_thres); if (ret) goto error_ret; - ret = i2c_smbus_write_byte_data(chip->client, - TSL2563_CMD | TSL2563_REG_LOWLOW, - chip->low_thres & 0xFF); + ret = i2c_smbus_write_word_data(chip->client, + TSL2563_CMD | TSL2563_REG_LOW, + chip->low_thres); if (ret) goto error_ret; - ret = i2c_smbus_write_byte_data(chip->client, - TSL2563_CMD | TSL2563_REG_LOWHIGH, - (chip->low_thres >> 8) & 0xFF); /* * Interrupt register is automatically written anyway if it is relevant * so is not here. @@ -325,13 +313,13 @@ static int tsl2563_get_adc(struct tsl2563_chip *chip) while (retry) { ret = i2c_smbus_read_word_data(client, - TSL2563_CMD | TSL2563_REG_DATA0LOW); + TSL2563_CMD | TSL2563_REG_DATA0); if (ret < 0) goto out; adc0 = ret; ret = i2c_smbus_read_word_data(client, - TSL2563_CMD | TSL2563_REG_DATA1LOW); + TSL2563_CMD | TSL2563_REG_DATA1); if (ret < 0) goto out; adc1 = ret; @@ -584,20 +572,18 @@ static int tsl2563_write_thresh(struct iio_dev *indio_dev, { struct tsl2563_chip *chip = iio_priv(indio_dev); int ret; - u8 address; + + mutex_lock(&chip->lock); if (dir == IIO_EV_DIR_RISING) - address = TSL2563_REG_HIGHLOW; + ret = i2c_smbus_write_word_data(chip->client, + TSL2563_CMD | TSL2563_REG_HIGH, val); else - address = TSL2563_REG_LOWLOW; - mutex_lock(&chip->lock); - ret = i2c_smbus_write_byte_data(chip->client, TSL2563_CMD | address, - val & 0xFF); + ret = i2c_smbus_write_word_data(chip->client, + TSL2563_CMD | TSL2563_REG_LOW, val); if (ret) goto error_ret; - ret = i2c_smbus_write_byte_data(chip->client, - TSL2563_CMD | (address + 1), - (val >> 8) & 0xFF); + if (dir == IIO_EV_DIR_RISING) chip->high_thres = val; else |