Merge tag 'iio-for-6.4a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next

Jonathan writes:

1st set of IIO new device support, features and cleanups for the 6.4 cycle.

New device support
* bosch,bmp280
  - Add support for BMP580 - includes significant refactoring and general
    driver cleanup + support for non-volatile memory for trimming and config
    parameters.
* rohm BU27034
  - New driver for this 3 channel ambient light sensor.
  - New support library for devices where both integration time and
    amplifier gain are configurable.  In these cases a scale change
    may require changing bother underlying values. This library module
    provides code to help with this.
* st,accel
  - Add support for IIS328DQ (ID only as compatible wtih LIS331DL)
* st,lsm6dsx
  - Add support for ASM330LHB automotive MEMS sensor.
* ti,ads1100, ads1000
  - New driver for these 16 bit ADCs.
* ti,tmp117
  - Add support for older tmp116 device. Includes some general driver cleanup.

Staging driver drops
* adi,ade7854
  - Driver was a very long way from compliant with IIO infrastructure and ABI.
    If anyone wants a non staging version of this driver they are better off
    starting from scratch. Hence drop it and the associated meter.h header.

Features
* adi,ad7441r
  - Add DT binding to set sink current for digital input.
* semtech,sx9324,9360
  - Support older register mapping from firmware designed for windows.

Core improvements.
* Move iio_trigger_poll() docs to next to the implementation and add a note
  on expected caller context.
* Rename iio_trigger_poll_chained() to iio_trigger_poll_nested() so
  as to use more standard / common terminology.
* Improve main ABI docs references to offset and scale for raw values by
  making them consistent and clear.

Cleanups and minor fixes:
* adi,ad5592r
  - Add GPIO names - useful for debug.
* adi,ad7441r
  - Fix current input, loop powered mode configuration setup.
* adi,adis16475
  - Fix wrong commented value for minimum advised lower rate.
* adi,admv1013
  - Use devm_clk_get_enabled() to reduce boilerplate.
* adi,ads1210
  - Fix wrong bits for writing config register (late fix and has
    been broken a long time so not rushed upstream)
* amlogic,meson-saradc
  - Improve cleanup in error handling if BL30 handshake fails.
* apex-embedded,stx104
  - Migrate to regmap and use regmap_read_poll_timeout() to neatly handle
    retries.
  - Add local mutex to close various races.
  - Use define U16_MAX rather than value for limit.
  - Improve code readability with minor reorganization.
* atmel,ad91-sama5d2
  - Drop trivial dead code.
* kionix,kx022a
  - Drop unused structure element.
* linear,ltc2983
  - Reorganize bindings doc to enable unevaluatedProperties to be set
    in one place for all child nodes.
  - Make binding for adi,custom-thermocouple accept signed values.
* maxim,max44000
  - Add OF Device matching (of_match_table was not correctly set).
* maxim,max5522
  - Missing static
* measurement-computing,cio-dac
  - Fix wrong part name in comments.
  - Migrate to regmap.
  - Improve includes by replacing bitops.h with more direct bits.h
* qcom,pm8xxx-xoadc
  - Remove a check that can never fail.
* renesas,rcar-gyroadc
  - DT binding documentation improvements.
  - Tidy up an unused warning with __maybe_unused.
* semtech,sx_common
  - Drop docs for a structure element that doesn't exist.
* semtech,sx9500
  - Drop ACPI_PTR() and of_match_ptr() protections that just complicate
    the code / block some firmware registration types that would otherwise
    work.
* sensiron,sps30
  - Comment formatting tidy up.
* st,sensors
  - Drop duplicate text in DT binding.
* st,stm32-adc
  - Add some missing static markings.
* ti,ads1100
  - Use correct return code in dev_err_probe() call.
* x-powers,axp20x_adc - precursor series to simplify addition of AXP192.
  - General code cleanup / minor refactoring for better readabilty of code.
  - Switch from boolean value to mask for adc_en2 field to avoid hard coding
    a mask that will be different in AXP192

* tag 'iio-for-6.4a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (63 commits)
  MAINTAINERS: Add ROHM BU27034
  iio: light: ROHM BU27034 Ambient Light Sensor
  dt-bindings: iio: light: Support ROHM BU27034
  MAINTAINERS: Add IIO gain-time-scale helpers
  iio: light: Add gain-time-scale helpers
  doc: Make sysfs-bus-iio doc more exact
  iio: dac: set variable max5522_channels storage-class-specifier to static
  dt-bindings: iio: temperature: ltc2983: Make 'adi,custom-thermocouple' signed
  dt-bindings: iio: temperature: ltc2983: Fix child node unevaluated properties
  iio: addac: stx104: Use regmap_read_poll_timeout() for conversion poll
  iio: addac: stx104: Migrate to the regmap API
  iio: addac: stx104: Improve indentation in stx104_write_raw()
  iio: addac: stx104: Use define rather than hardcoded limit for write val
  iio: addac: stx104: Fix race condition when converting analog-to-digital
  iio: addac: stx104: Fix race condition for stx104_write_raw()
  dt-bindings: iio: st-sensors: Fix repeated text
  staging: iio: resolver: ads1210: fix config mode
  iio: adc: ti-ads1100: fix error code in probe()
  iio: accel: add support for IIS328DQ variant
  dt-bindings: iio: st-sensors: Add IIS328DQ accelerometer
  ...

1 files changed, 46 insertions, 22 deletions

diff --git a/drivers/iio/dac/cio-dac.c b/drivers/iio/dac/cio-dac.c
index 18a64f72fc18..069904d00c2e 100644
--- a/drivers/iio/dac/cio-dac.c
+++ b/drivers/iio/dac/cio-dac.c
@@ -4,18 +4,17 @@
  * Copyright (C) 2016 William Breathitt Gray
  *
  * This driver supports the following Measurement Computing devices: CIO-DAC16,
- * CIO-DAC06, and PC104-DAC06.
+ * CIO-DAC08, and PC104-DAC06.
  */
-#include <linux/bitops.h>
+#include <linux/bits.h>
 #include <linux/device.h>
-#include <linux/errno.h>
+#include <linux/err.h>
 #include <linux/iio/iio.h>
 #include <linux/iio/types.h>
-#include <linux/io.h>
-#include <linux/ioport.h>
 #include <linux/isa.h>
 #include <linux/module.h>
 #include <linux/moduleparam.h>
+#include <linux/regmap.h>
 #include <linux/types.h>
 
 #define CIO_DAC_NUM_CHAN 16
@@ -35,25 +34,51 @@ static unsigned int num_cio_dac;
 module_param_hw_array(base, uint, ioport, &num_cio_dac, 0);
 MODULE_PARM_DESC(base, "Measurement Computing CIO-DAC base addresses");
 
+#define CIO_DAC_BASE 0x00
+#define CIO_DAC_CHANNEL_STRIDE 2
+
+static bool cio_dac_precious_reg(struct device *dev, unsigned int reg)
+{
+	/*
+	 * All registers are considered precious; if the XFER jumper is set on
+	 * the device, then no update occurs until a DAC register is read.
+	 */
+	return true;
+}
+
+static const struct regmap_config cio_dac_regmap_config = {
+	.reg_bits = 16,
+	.reg_stride = 2,
+	.val_bits = 16,
+	.io_port = true,
+	.max_register = 0x1F,
+	.precious_reg = cio_dac_precious_reg,
+};
+
 /**
  * struct cio_dac_iio - IIO device private data structure
- * @chan_out_states:	channels' output states
- * @base:		base memory address of the DAC device
+ * @map: Regmap for the device
  */
 struct cio_dac_iio {
-	int chan_out_states[CIO_DAC_NUM_CHAN];
-	u16 __iomem *base;
+	struct regmap *map;
 };
 
 static int cio_dac_read_raw(struct iio_dev *indio_dev,
 	struct iio_chan_spec const *chan, int *val, int *val2, long mask)
 {
 	struct cio_dac_iio *const priv = iio_priv(indio_dev);
+	const unsigned int offset = chan->channel * CIO_DAC_CHANNEL_STRIDE;
+	int err;
+	unsigned int dac_val;
 
 	if (mask != IIO_CHAN_INFO_RAW)
 		return -EINVAL;
 
-	*val = priv->chan_out_states[chan->channel];
+	err = regmap_read(priv->map, CIO_DAC_BASE + offset, &dac_val);
+	if (err)
+		return err;
+
+	*val = dac_val;
 
 	return IIO_VAL_INT;
 }
@@ -62,6 +87,7 @@ static int cio_dac_write_raw(struct iio_dev *indio_dev,
 	struct iio_chan_spec const *chan, int val, int val2, long mask)
 {
 	struct cio_dac_iio *const priv = iio_priv(indio_dev);
+	const unsigned int offset = chan->channel * CIO_DAC_CHANNEL_STRIDE;
 
 	if (mask != IIO_CHAN_INFO_RAW)
 		return -EINVAL;
@@ -70,10 +96,7 @@ static int cio_dac_write_raw(struct iio_dev *indio_dev,
 	if ((unsigned int)val > 4095)
 		return -EINVAL;
 
-	priv->chan_out_states[chan->channel] = val;
-	iowrite16(val, priv->base + chan->channel);
-
-	return 0;
+	return regmap_write(priv->map, CIO_DAC_BASE + offset, val);
 }
 
 static const struct iio_info cio_dac_info = {
@@ -92,7 +115,7 @@ static int cio_dac_probe(struct device *dev, unsigned int id)
 {
 	struct iio_dev *indio_dev;
 	struct cio_dac_iio *priv;
-	unsigned int i;
+	void __iomem *regs;
 
 	indio_dev = devm_iio_device_alloc(dev, sizeof(*priv));
 	if (!indio_dev)
@@ -105,21 +128,22 @@ static int cio_dac_probe(struct device *dev, unsigned int id)
 		return -EBUSY;
 	}
 
-	priv = iio_priv(indio_dev);
-	priv->base = devm_ioport_map(dev, base[id], CIO_DAC_EXTENT);
-	if (!priv->base)
+	regs = devm_ioport_map(dev, base[id], CIO_DAC_EXTENT);
+	if (!regs)
 		return -ENOMEM;
 
+	priv = iio_priv(indio_dev);
+	priv->map = devm_regmap_init_mmio(dev, regs, &cio_dac_regmap_config);
+	if (IS_ERR(priv->map))
+		return dev_err_probe(dev, PTR_ERR(priv->map),
+				     "Unable to initialize register map\n");
+
 	indio_dev->info = &cio_dac_info;
 	indio_dev->modes = INDIO_DIRECT_MODE;
 	indio_dev->channels = cio_dac_channels;
 	indio_dev->num_channels = CIO_DAC_NUM_CHAN;
 	indio_dev->name = dev_name(dev);
 
-	/* initialize DAC outputs to 0V */
-	for (i = 0; i < CIO_DAC_NUM_CHAN; i++)
-		iowrite16(0, priv->base + i);
-
 	return devm_iio_device_register(dev, indio_dev);
 }