diff options
author | Ben Dooks <ben-linux@fluff.org> | 2008-12-16 22:06:30 +0000 |
---|---|---|
committer | Ben Dooks <ben-linux@fluff.org> | 2008-12-16 22:06:30 +0000 |
commit | 5a93f42017a3d1dc7869939d46d4158732227dd7 (patch) | |
tree | 9bdf12c1e066b472866e14bc8c70f8c8d93b8998 /drivers/i2c | |
parent | 1bda71282ded6a2e09a2db7c8884542fb46bfd4f (diff) | |
parent | 5043e9e737c4909e7f187d479227df46f5a2dd53 (diff) |
Merge branch 'i2c-for-ben' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 into i2c-next
Diffstat (limited to 'drivers/i2c')
-rw-r--r-- | drivers/i2c/busses/i2c-omap.c | 420 |
1 files changed, 328 insertions, 92 deletions
diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c index 608038d64f81..96f3bedb2799 100644 --- a/drivers/i2c/busses/i2c-omap.c +++ b/drivers/i2c/busses/i2c-omap.c @@ -2,13 +2,16 @@ * TI OMAP I2C master mode driver * * Copyright (C) 2003 MontaVista Software, Inc. - * Copyright (C) 2004 Texas Instruments. - * - * Updated to work with multiple I2C interfaces on 24xx by - * Tony Lindgren <tony@atomide.com> and Imre Deak <imre.deak@nokia.com> * Copyright (C) 2005 Nokia Corporation + * Copyright (C) 2004 - 2007 Texas Instruments. * - * Cleaned up by Juha Yrjölä <juha.yrjola@nokia.com> + * Originally written by MontaVista Software, Inc. + * Additional contributions by: + * Tony Lindgren <tony@atomide.com> + * Imre Deak <imre.deak@nokia.com> + * Juha Yrjölä <juha.yrjola@solidboot.com> + * Syed Khasim <x0khasim@ti.com> + * Nishant Menon <nm@ti.com> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -33,8 +36,14 @@ #include <linux/completion.h> #include <linux/platform_device.h> #include <linux/clk.h> +#include <linux/io.h> + +/* I2C controller revisions */ +#define OMAP_I2C_REV_2 0x20 -#include <asm/io.h> +/* I2C controller revisions present on specific hardware */ +#define OMAP_I2C_REV_ON_2430 0x36 +#define OMAP_I2C_REV_ON_3430 0x3C /* timeout waiting for the controller to respond */ #define OMAP_I2C_TIMEOUT (msecs_to_jiffies(1000)) @@ -43,6 +52,8 @@ #define OMAP_I2C_IE_REG 0x04 #define OMAP_I2C_STAT_REG 0x08 #define OMAP_I2C_IV_REG 0x0c +/* For OMAP3 I2C_IV has changed to I2C_WE (wakeup enable) */ +#define OMAP_I2C_WE_REG 0x0c #define OMAP_I2C_SYSS_REG 0x10 #define OMAP_I2C_BUF_REG 0x14 #define OMAP_I2C_CNT_REG 0x18 @@ -55,8 +66,11 @@ #define OMAP_I2C_SCLL_REG 0x34 #define OMAP_I2C_SCLH_REG 0x38 #define OMAP_I2C_SYSTEST_REG 0x3c +#define OMAP_I2C_BUFSTAT_REG 0x40 /* I2C Interrupt Enable Register (OMAP_I2C_IE): */ +#define OMAP_I2C_IE_XDR (1 << 14) /* TX Buffer drain int enable */ +#define OMAP_I2C_IE_RDR (1 << 13) /* RX Buffer drain int enable */ #define OMAP_I2C_IE_XRDY (1 << 4) /* TX data ready int enable */ #define OMAP_I2C_IE_RRDY (1 << 3) /* RX data ready int enable */ #define OMAP_I2C_IE_ARDY (1 << 2) /* Access ready int enable */ @@ -64,7 +78,8 @@ #define OMAP_I2C_IE_AL (1 << 0) /* Arbitration lost int ena */ /* I2C Status Register (OMAP_I2C_STAT): */ -#define OMAP_I2C_STAT_SBD (1 << 15) /* Single byte data */ +#define OMAP_I2C_STAT_XDR (1 << 14) /* TX Buffer draining */ +#define OMAP_I2C_STAT_RDR (1 << 13) /* RX Buffer draining */ #define OMAP_I2C_STAT_BB (1 << 12) /* Bus busy */ #define OMAP_I2C_STAT_ROVR (1 << 11) /* Receive overrun */ #define OMAP_I2C_STAT_XUDF (1 << 10) /* Transmit underflow */ @@ -76,13 +91,34 @@ #define OMAP_I2C_STAT_NACK (1 << 1) /* No ack interrupt enable */ #define OMAP_I2C_STAT_AL (1 << 0) /* Arbitration lost int ena */ +/* I2C WE wakeup enable register */ +#define OMAP_I2C_WE_XDR_WE (1 << 14) /* TX drain wakup */ +#define OMAP_I2C_WE_RDR_WE (1 << 13) /* RX drain wakeup */ +#define OMAP_I2C_WE_AAS_WE (1 << 9) /* Address as slave wakeup*/ +#define OMAP_I2C_WE_BF_WE (1 << 8) /* Bus free wakeup */ +#define OMAP_I2C_WE_STC_WE (1 << 6) /* Start condition wakeup */ +#define OMAP_I2C_WE_GC_WE (1 << 5) /* General call wakeup */ +#define OMAP_I2C_WE_DRDY_WE (1 << 3) /* TX/RX data ready wakeup */ +#define OMAP_I2C_WE_ARDY_WE (1 << 2) /* Reg access ready wakeup */ +#define OMAP_I2C_WE_NACK_WE (1 << 1) /* No acknowledgment wakeup */ +#define OMAP_I2C_WE_AL_WE (1 << 0) /* Arbitration lost wakeup */ + +#define OMAP_I2C_WE_ALL (OMAP_I2C_WE_XDR_WE | OMAP_I2C_WE_RDR_WE | \ + OMAP_I2C_WE_AAS_WE | OMAP_I2C_WE_BF_WE | \ + OMAP_I2C_WE_STC_WE | OMAP_I2C_WE_GC_WE | \ + OMAP_I2C_WE_DRDY_WE | OMAP_I2C_WE_ARDY_WE | \ + OMAP_I2C_WE_NACK_WE | OMAP_I2C_WE_AL_WE) + /* I2C Buffer Configuration Register (OMAP_I2C_BUF): */ #define OMAP_I2C_BUF_RDMA_EN (1 << 15) /* RX DMA channel enable */ +#define OMAP_I2C_BUF_RXFIF_CLR (1 << 14) /* RX FIFO Clear */ #define OMAP_I2C_BUF_XDMA_EN (1 << 7) /* TX DMA channel enable */ +#define OMAP_I2C_BUF_TXFIF_CLR (1 << 6) /* TX FIFO Clear */ /* I2C Configuration Register (OMAP_I2C_CON): */ #define OMAP_I2C_CON_EN (1 << 15) /* I2C module enable */ #define OMAP_I2C_CON_BE (1 << 14) /* Big endian mode */ +#define OMAP_I2C_CON_OPMODE_HS (1 << 12) /* High Speed support */ #define OMAP_I2C_CON_STB (1 << 11) /* Start byte mode (master) */ #define OMAP_I2C_CON_MST (1 << 10) /* Master/slave mode */ #define OMAP_I2C_CON_TRX (1 << 9) /* TX/RX mode (master only) */ @@ -91,6 +127,10 @@ #define OMAP_I2C_CON_STP (1 << 1) /* Stop cond (master only) */ #define OMAP_I2C_CON_STT (1 << 0) /* Start condition (master) */ +/* I2C SCL time value when Master */ +#define OMAP_I2C_SCLL_HSSCLL 8 +#define OMAP_I2C_SCLH_HSSCLH 8 + /* I2C System Test Register (OMAP_I2C_SYSTEST): */ #ifdef DEBUG #define OMAP_I2C_SYSTEST_ST_EN (1 << 15) /* System test enable */ @@ -103,17 +143,19 @@ #define OMAP_I2C_SYSTEST_SDA_O (1 << 0) /* SDA line drive out */ #endif -/* I2C System Status register (OMAP_I2C_SYSS): */ -#define OMAP_I2C_SYSS_RDONE (1 << 0) /* Reset Done */ +/* OCP_SYSSTATUS bit definitions */ +#define SYSS_RESETDONE_MASK (1 << 0) + +/* OCP_SYSCONFIG bit definitions */ +#define SYSC_CLOCKACTIVITY_MASK (0x3 << 8) +#define SYSC_SIDLEMODE_MASK (0x3 << 3) +#define SYSC_ENAWAKEUP_MASK (1 << 2) +#define SYSC_SOFTRESET_MASK (1 << 1) +#define SYSC_AUTOIDLE_MASK (1 << 0) -/* I2C System Configuration Register (OMAP_I2C_SYSC): */ -#define OMAP_I2C_SYSC_SRST (1 << 1) /* Soft Reset */ +#define SYSC_IDLEMODE_SMART 0x2 +#define SYSC_CLOCKACTIVITY_FCLK 0x2 -/* REVISIT: Use platform_data instead of module parameters */ -/* Fast Mode = 400 kHz, Standard = 100 kHz */ -static int clock = 100; /* Default: 100 kHz */ -module_param(clock, int, 0); -MODULE_PARM_DESC(clock, "Set I2C clock in kHz: 400=fast mode (default == 100)"); struct omap_i2c_dev { struct device *dev; @@ -123,11 +165,17 @@ struct omap_i2c_dev { struct clk *fclk; /* Functional clock */ struct completion cmd_complete; struct resource *ioarea; + u32 speed; /* Speed of bus in Khz */ u16 cmd_err; u8 *buf; size_t buf_len; struct i2c_adapter adapter; - unsigned rev1:1; + u8 fifo_size; /* use as flag and value + * fifo_size==0 implies no fifo + * if set, should be trsh+1 + */ + u8 rev; + unsigned b_hw:1; /* bad h/w fixes */ unsigned idle:1; u16 iestate; /* Saved interrupt register */ }; @@ -143,9 +191,9 @@ static inline u16 omap_i2c_read_reg(struct omap_i2c_dev *i2c_dev, int reg) return __raw_readw(i2c_dev->base + reg); } -static int omap_i2c_get_clocks(struct omap_i2c_dev *dev) +static int __init omap_i2c_get_clocks(struct omap_i2c_dev *dev) { - if (cpu_is_omap16xx() || cpu_is_omap24xx()) { + if (cpu_is_omap16xx() || cpu_class_is_omap2()) { dev->iclk = clk_get(dev->dev, "i2c_ick"); if (IS_ERR(dev->iclk)) { dev->iclk = NULL; @@ -178,25 +226,33 @@ static void omap_i2c_put_clocks(struct omap_i2c_dev *dev) static void omap_i2c_unidle(struct omap_i2c_dev *dev) { + WARN_ON(!dev->idle); + if (dev->iclk != NULL) clk_enable(dev->iclk); clk_enable(dev->fclk); + dev->idle = 0; if (dev->iestate) omap_i2c_write_reg(dev, OMAP_I2C_IE_REG, dev->iestate); - dev->idle = 0; } static void omap_i2c_idle(struct omap_i2c_dev *dev) { u16 iv; - dev->idle = 1; + WARN_ON(dev->idle); + dev->iestate = omap_i2c_read_reg(dev, OMAP_I2C_IE_REG); omap_i2c_write_reg(dev, OMAP_I2C_IE_REG, 0); - if (dev->rev1) - iv = omap_i2c_read_reg(dev, OMAP_I2C_IV_REG); /* Read clears */ - else + if (dev->rev < OMAP_I2C_REV_2) { + iv = omap_i2c_read_reg(dev, OMAP_I2C_IV_REG); /* Read clears */ + } else { omap_i2c_write_reg(dev, OMAP_I2C_STAT_REG, dev->iestate); + + /* Flush posted write before the dev->idle store occurs */ + omap_i2c_read_reg(dev, OMAP_I2C_STAT_REG); + } + dev->idle = 1; clk_disable(dev->fclk); if (dev->iclk != NULL) clk_disable(dev->iclk); @@ -204,18 +260,20 @@ static void omap_i2c_idle(struct omap_i2c_dev *dev) static int omap_i2c_init(struct omap_i2c_dev *dev) { - u16 psc = 0; + u16 psc = 0, scll = 0, sclh = 0; + u16 fsscll = 0, fssclh = 0, hsscll = 0, hssclh = 0; unsigned long fclk_rate = 12000000; unsigned long timeout; + unsigned long internal_clk = 0; - if (!dev->rev1) { - omap_i2c_write_reg(dev, OMAP_I2C_SYSC_REG, OMAP_I2C_SYSC_SRST); + if (dev->rev >= OMAP_I2C_REV_2) { + omap_i2c_write_reg(dev, OMAP_I2C_SYSC_REG, SYSC_SOFTRESET_MASK); /* For some reason we need to set the EN bit before the * reset done bit gets set. */ timeout = jiffies + OMAP_I2C_TIMEOUT; omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, OMAP_I2C_CON_EN); while (!(omap_i2c_read_reg(dev, OMAP_I2C_SYSS_REG) & - OMAP_I2C_SYSS_RDONE)) { + SYSS_RESETDONE_MASK)) { if (time_after(jiffies, timeout)) { dev_warn(dev->dev, "timeout waiting " "for controller reset\n"); @@ -223,6 +281,33 @@ static int omap_i2c_init(struct omap_i2c_dev *dev) } msleep(1); } + + /* SYSC register is cleared by the reset; rewrite it */ + if (dev->rev == OMAP_I2C_REV_ON_2430) { + + omap_i2c_write_reg(dev, OMAP_I2C_SYSC_REG, + SYSC_AUTOIDLE_MASK); + + } else if (dev->rev >= OMAP_I2C_REV_ON_3430) { + u32 v; + + v = SYSC_AUTOIDLE_MASK; + v |= SYSC_ENAWAKEUP_MASK; + v |= (SYSC_IDLEMODE_SMART << + __ffs(SYSC_SIDLEMODE_MASK)); + v |= (SYSC_CLOCKACTIVITY_FCLK << + __ffs(SYSC_CLOCKACTIVITY_MASK)); + + omap_i2c_write_reg(dev, OMAP_I2C_SYSC_REG, v); + /* + * Enabling all wakup sources to stop I2C freezing on + * WFI instruction. + * REVISIT: Some wkup sources might not be needed. + */ + omap_i2c_write_reg(dev, OMAP_I2C_WE_REG, + OMAP_I2C_WE_ALL); + + } } omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, 0); @@ -249,27 +334,65 @@ static int omap_i2c_init(struct omap_i2c_dev *dev) psc = fclk_rate / 12000000; } + if (cpu_is_omap2430() || cpu_is_omap34xx()) { + + /* HSI2C controller internal clk rate should be 19.2 Mhz */ + internal_clk = 19200; + fclk_rate = clk_get_rate(dev->fclk) / 1000; + + /* Compute prescaler divisor */ + psc = fclk_rate / internal_clk; + psc = psc - 1; + + /* If configured for High Speed */ + if (dev->speed > 400) { + /* For first phase of HS mode */ + fsscll = internal_clk / (400 * 2) - 6; + fssclh = internal_clk / (400 * 2) - 6; + + /* For second phase of HS mode */ + hsscll = fclk_rate / (dev->speed * 2) - 6; + hssclh = fclk_rate / (dev->speed * 2) - 6; + } else { + /* To handle F/S modes */ + fsscll = internal_clk / (dev->speed * 2) - 6; + fssclh = internal_clk / (dev->speed * 2) - 6; + } + scll = (hsscll << OMAP_I2C_SCLL_HSSCLL) | fsscll; + sclh = (hssclh << OMAP_I2C_SCLH_HSSCLH) | fssclh; + } else { + /* Program desired operating rate */ + fclk_rate /= (psc + 1) * 1000; + if (psc > 2) + psc = 2; + scll = fclk_rate / (dev->speed * 2) - 7 + psc; + sclh = fclk_rate / (dev->speed * 2) - 7 + psc; + } + /* Setup clock prescaler to obtain approx 12MHz I2C module clock: */ omap_i2c_write_reg(dev, OMAP_I2C_PSC_REG, psc); - /* Program desired operating rate */ - fclk_rate /= (psc + 1) * 1000; - if (psc > 2) - psc = 2; + /* SCL low and high time values */ + omap_i2c_write_reg(dev, OMAP_I2C_SCLL_REG, scll); + omap_i2c_write_reg(dev, OMAP_I2C_SCLH_REG, sclh); - omap_i2c_write_reg(dev, OMAP_I2C_SCLL_REG, - fclk_rate / (clock * 2) - 7 + psc); - omap_i2c_write_reg(dev, OMAP_I2C_SCLH_REG, - fclk_rate / (clock * 2) - 7 + psc); + if (dev->fifo_size) + /* Note: setup required fifo size - 1 */ + omap_i2c_write_reg(dev, OMAP_I2C_BUF_REG, + (dev->fifo_size - 1) << 8 | /* RTRSH */ + OMAP_I2C_BUF_RXFIF_CLR | + (dev->fifo_size - 1) | /* XTRSH */ + OMAP_I2C_BUF_TXFIF_CLR); /* Take the I2C module out of reset: */ omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, OMAP_I2C_CON_EN); /* Enable interrupts */ omap_i2c_write_reg(dev, OMAP_I2C_IE_REG, - (OMAP_I2C_IE_XRDY | OMAP_I2C_IE_RRDY | - OMAP_I2C_IE_ARDY | OMAP_I2C_IE_NACK | - OMAP_I2C_IE_AL)); + (OMAP_I2C_IE_XRDY | OMAP_I2C_IE_RRDY | + OMAP_I2C_IE_ARDY | OMAP_I2C_IE_NACK | + OMAP_I2C_IE_AL) | ((dev->fifo_size) ? + (OMAP_I2C_IE_RDR | OMAP_I2C_IE_XDR) : 0)); return 0; } @@ -316,20 +439,59 @@ static int omap_i2c_xfer_msg(struct i2c_adapter *adap, omap_i2c_write_reg(dev, OMAP_I2C_CNT_REG, dev->buf_len); + /* Clear the FIFO Buffers */ + w = omap_i2c_read_reg(dev, OMAP_I2C_BUF_REG); + w |= OMAP_I2C_BUF_RXFIF_CLR | OMAP_I2C_BUF_TXFIF_CLR; + omap_i2c_write_reg(dev, OMAP_I2C_BUF_REG, w); + init_completion(&dev->cmd_complete); dev->cmd_err = 0; w = OMAP_I2C_CON_EN | OMAP_I2C_CON_MST | OMAP_I2C_CON_STT; + + /* High speed configuration */ + if (dev->speed > 400) + w |= OMAP_I2C_CON_OPMODE_HS; + if (msg->flags & I2C_M_TEN) w |= OMAP_I2C_CON_XA; if (!(msg->flags & I2C_M_RD)) w |= OMAP_I2C_CON_TRX; - if (stop) + + if (!dev->b_hw && stop) w |= OMAP_I2C_CON_STP; + omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, w); - r = wait_for_completion_interruptible_timeout(&dev->cmd_complete, - OMAP_I2C_TIMEOUT); + /* + * Don't write stt and stp together on some hardware. + */ + if (dev->b_hw && stop) { + unsigned long delay = jiffies + OMAP_I2C_TIMEOUT; + u16 con = omap_i2c_read_reg(dev, OMAP_I2C_CON_REG); + while (con & OMAP_I2C_CON_STT) { + con = omap_i2c_read_reg(dev, OMAP_I2C_CON_REG); + + /* Let the user know if i2c is in a bad state */ + if (time_after(jiffies, delay)) { + dev_err(dev->dev, "controller timed out " + "waiting for start condition to finish\n"); + return -ETIMEDOUT; + } + cpu_relax(); + } + + w |= OMAP_I2C_CON_STP; + w &= ~OMAP_I2C_CON_STT; + omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, w); + } + + /* + * REVISIT: We should abort the transfer on signals, but the bus goes + * into arbitration and we're currently unable to recover from it. + */ + r = wait_for_completion_timeout(&dev->cmd_complete, + OMAP_I2C_TIMEOUT); dev->buf_len = 0; if (r < 0) return r; @@ -376,7 +538,8 @@ omap_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num) omap_i2c_unidle(dev); - if ((r = omap_i2c_wait_for_bb(dev)) < 0) + r = omap_i2c_wait_for_bb(dev); + if (r < 0) goto out; for (i = 0; i < num; i++) { @@ -411,6 +574,9 @@ omap_i2c_ack_stat(struct omap_i2c_dev *dev, u16 stat) omap_i2c_write_reg(dev, OMAP_I2C_STAT_REG, stat); } +/* rev1 devices are apparently only on some 15xx */ +#ifdef CONFIG_ARCH_OMAP15XX + static irqreturn_t omap_i2c_rev1_isr(int this_irq, void *dev_id) { @@ -465,6 +631,9 @@ omap_i2c_rev1_isr(int this_irq, void *dev_id) return IRQ_HANDLED; } +#else +#define omap_i2c_rev1_isr NULL +#endif static irqreturn_t omap_i2c_isr(int this_irq, void *dev_id) @@ -472,7 +641,7 @@ omap_i2c_isr(int this_irq, void *dev_id) struct omap_i2c_dev *dev = dev_id; u16 bits; u16 stat, w; - int count = 0; + int err, count = 0; if (dev->idle) return IRQ_NONE; @@ -487,39 +656,96 @@ omap_i2c_isr(int this_irq, void *dev_id) omap_i2c_write_reg(dev, OMAP_I2C_STAT_REG, stat); - if (stat & OMAP_I2C_STAT_ARDY) { - omap_i2c_complete_cmd(dev, 0); - continue; + err = 0; + if (stat & OMAP_I2C_STAT_NACK) { + err |= OMAP_I2C_STAT_NACK; + omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, + OMAP_I2C_CON_STP); } - if (stat & OMAP_I2C_STAT_RRDY) { - w = omap_i2c_read_reg(dev, OMAP_I2C_DATA_REG); - if (dev->buf_len) { - *dev->buf++ = w; - dev->buf_len--; + if (stat & OMAP_I2C_STAT_AL) { + dev_err(dev->dev, "Arbitration lost\n"); + err |= OMAP_I2C_STAT_AL; + } + if (stat & (OMAP_I2C_STAT_ARDY | OMAP_I2C_STAT_NACK | + OMAP_I2C_STAT_AL)) + omap_i2c_complete_cmd(dev, err); + if (stat & (OMAP_I2C_STAT_RRDY | OMAP_I2C_STAT_RDR)) { + u8 num_bytes = 1; + if (dev->fifo_size) { + if (stat & OMAP_I2C_STAT_RRDY) + num_bytes = dev->fifo_size; + else + num_bytes = omap_i2c_read_reg(dev, + OMAP_I2C_BUFSTAT_REG); + } + while (num_bytes) { + num_bytes--; + w = omap_i2c_read_reg(dev, OMAP_I2C_DATA_REG); if (dev->buf_len) { - *dev->buf++ = w >> 8; + *dev->buf++ = w; dev->buf_len--; + /* Data reg from 2430 is 8 bit wide */ + if (!cpu_is_omap2430() && + !cpu_is_omap34xx()) { + if (dev->buf_len) { + *dev->buf++ = w >> 8; + dev->buf_len--; + } + } + } else { + if (stat & OMAP_I2C_STAT_RRDY) + dev_err(dev->dev, + "RRDY IRQ while no data" + " requested\n"); + if (stat & OMAP_I2C_STAT_RDR) + dev_err(dev->dev, + "RDR IRQ while no data" + " requested\n"); + break; } - } else - dev_err(dev->dev, "RRDY IRQ while no data " - "requested\n"); - omap_i2c_ack_stat(dev, OMAP_I2C_STAT_RRDY); + } + omap_i2c_ack_stat(dev, + stat & (OMAP_I2C_STAT_RRDY | OMAP_I2C_STAT_RDR)); continue; } - if (stat & OMAP_I2C_STAT_XRDY) { - w = 0; - if (dev->buf_len) { - w = *dev->buf++; - dev->buf_len--; + if (stat & (OMAP_I2C_STAT_XRDY | OMAP_I2C_STAT_XDR)) { + u8 num_bytes = 1; + if (dev->fifo_size) { + if (stat & OMAP_I2C_STAT_XRDY) + num_bytes = dev->fifo_size; + else + num_bytes = omap_i2c_read_reg(dev, + OMAP_I2C_BUFSTAT_REG); + } + while (num_bytes) { + num_bytes--; + w = 0; if (dev->buf_len) { - w |= *dev->buf++ << 8; + w = *dev->buf++; dev->buf_len--; + /* Data reg from 2430 is 8 bit wide */ + if (!cpu_is_omap2430() && + !cpu_is_omap34xx()) { + if (dev->buf_len) { + w |= *dev->buf++ << 8; + dev->buf_len--; + } + } + } else { + if (stat & OMAP_I2C_STAT_XRDY) + dev_err(dev->dev, + "XRDY IRQ while no " + "data to send\n"); + if (stat & OMAP_I2C_STAT_XDR) + dev_err(dev->dev, + "XDR IRQ while no " + "data to send\n"); + break; } - } else - dev_err(dev->dev, "XRDY IRQ while no " - "data to send\n"); - omap_i2c_write_reg(dev, OMAP_I2C_DATA_REG, w); - omap_i2c_ack_stat(dev, OMAP_I2C_STAT_XRDY); + omap_i2c_write_reg(dev, OMAP_I2C_DATA_REG, w); + } + omap_i2c_ack_stat(dev, + stat & (OMAP_I2C_STAT_XRDY | OMAP_I2C_STAT_XDR)); continue; } if (stat & OMAP_I2C_STAT_ROVR) { @@ -527,18 +753,9 @@ omap_i2c_isr(int this_irq, void *dev_id) dev->cmd_err |= OMAP_I2C_STAT_ROVR; } if (stat & OMAP_I2C_STAT_XUDF) { - dev_err(dev->dev, "Transmit overflow\n"); + dev_err(dev->dev, "Transmit underflow\n"); dev->cmd_err |= OMAP_I2C_STAT_XUDF; } - if (stat & OMAP_I2C_STAT_NACK) { - omap_i2c_complete_cmd(dev, OMAP_I2C_STAT_NACK); - omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, - OMAP_I2C_CON_STP); - } - if (stat & OMAP_I2C_STAT_AL) { - dev_err(dev->dev, "Arbitration lost\n"); - omap_i2c_complete_cmd(dev, OMAP_I2C_STAT_AL); - } } return count ? IRQ_HANDLED : IRQ_NONE; @@ -549,13 +766,15 @@ static const struct i2c_algorithm omap_i2c_algo = { .functionality = omap_i2c_func, }; -static int +static int __init omap_i2c_probe(struct platform_device *pdev) { struct omap_i2c_dev *dev; struct i2c_adapter *adap; struct resource *mem, *irq, *ioarea; + void *isr; int r; + u32 speed = 0; /* NOTE: driver uses the static register mapping */ mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); @@ -576,17 +795,19 @@ omap_i2c_probe(struct platform_device *pdev) return -EBUSY; } - if (clock > 200) - clock = 400; /* Fast mode */ - else - clock = 100; /* Standard mode */ - dev = kzalloc(sizeof(struct omap_i2c_dev), GFP_KERNEL); if (!dev) { r = -ENOMEM; goto err_release_region; } + if (pdev->dev.platform_data != NULL) + speed = *(u32 *)pdev->dev.platform_data; + else + speed = 100; /* Defualt speed */ + + dev->speed = speed; + dev->idle = 1; dev->dev = &pdev->dev; dev->irq = irq->start; dev->base = ioremap(mem->start, mem->end - mem->start + 1); @@ -602,22 +823,39 @@ omap_i2c_probe(struct platform_device *pdev) omap_i2c_unidle(dev); - if (cpu_is_omap15xx()) - dev->rev1 = omap_i2c_read_reg(dev, OMAP_I2C_REV_REG) < 0x20; + dev->rev = omap_i2c_read_reg(dev, OMAP_I2C_REV_REG) & 0xff; + + if (cpu_is_omap2430() || cpu_is_omap34xx()) { + u16 s; + + /* Set up the fifo size - Get total size */ + s = (omap_i2c_read_reg(dev, OMAP_I2C_BUFSTAT_REG) >> 14) & 0x3; + dev->fifo_size = 0x8 << s; + + /* + * Set up notification threshold as half the total available + * size. This is to ensure that we can handle the status on int + * call back latencies. + */ + dev->fifo_size = (dev->fifo_size / 2); + dev->b_hw = 1; /* Enable hardware fixes */ + } /* reset ASAP, clearing any IRQs */ omap_i2c_init(dev); - r = request_irq(dev->irq, dev->rev1 ? omap_i2c_rev1_isr : omap_i2c_isr, - 0, pdev->name, dev); + isr = (dev->rev < OMAP_I2C_REV_2) ? omap_i2c_rev1_isr : omap_i2c_isr; + r = request_irq(dev->irq, isr, 0, pdev->name, dev); if (r) { dev_err(dev->dev, "failure requesting irq %i\n", dev->irq); goto err_unuse_clocks; } - r = omap_i2c_read_reg(dev, OMAP_I2C_REV_REG) & 0xff; + dev_info(dev->dev, "bus %d rev%d.%d at %d kHz\n", - pdev->id, r >> 4, r & 0xf, clock); + pdev->id, dev->rev >> 4, dev->rev & 0xf, dev->speed); + + omap_i2c_idle(dev); adap = &dev->adapter; i2c_set_adapdata(adap, dev); @@ -635,8 +873,6 @@ omap_i2c_probe(struct platform_device *pdev) goto err_free_irq; } - omap_i2c_idle(dev); - return 0; err_free_irq: |