Merge branch 'i2c/for-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux

Pull i2c updates from Wolfram Sang:
 "Here is the 4.9 pull request from I2C including:

   - centralized error messages when registering to the core
   - improved lockdep annotations to prevent false positives
   - DT support for muxes, gates, and arbitrators
   - bus speeds can now be obtained from ACPI
   - i2c-octeon got refactored and now supports ThunderX SoCs, too
   - i2c-tegra and i2c-designware got a bigger bunch of updates
   - a couple of standard driver fixes and improvements"

* 'i2c/for-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (71 commits)
  i2c: axxia: disable clks in case of failure in probe
  i2c: octeon: thunderx: Limit register access retries
  i2c: uniphier-f: fix misdetection of incomplete STOP condition
  gpio: pca953x: variable 'id' was used twice
  i2c: i801: Add support for Kaby Lake PCH-H
  gpio: pca953x: fix an incorrect lockdep warning
  i2c: add a warning to i2c_adapter_depth()
  lockdep: make MAX_LOCKDEP_SUBCLASSES unconditionally visible
  i2c: export i2c_adapter_depth()
  i2c: rk3x: Fix variable 'min_total_ns' unused warning
  i2c: rk3x: Fix sparse warning
  i2c / ACPI: Do not touch an I2C device if it belongs to another adapter
  i2c: octeon: Fix high-level controller status check
  i2c: octeon: Avoid sending STOP during recovery
  i2c: octeon: Fix set SCL recovery function
  i2c: rcar: add support for r8a7796 (R-Car M3-W)
  i2c: imx: make bus recovery through pinctrl optional
  i2c: meson: add gxbb compatible string
  i2c: uniphier-f: set the adapter to master mode when probing
  i2c: uniphier-f: avoid WARN_ON() of clk_disable() in failure path
  ...

68 files changed, 1904 insertions, 1296 deletions

diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 5c3993b26129..6d94e2ec5b4f 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -836,7 +836,7 @@ config I2C_SH7760
 config I2C_SH_MOBILE
 	tristate "SuperH Mobile I2C Controller"
 	depends on HAS_DMA
-	depends on SUPERH || ARCH_RENESAS || COMPILE_TEST
+	depends on ARCH_SHMOBILE || ARCH_RENESAS || COMPILE_TEST
 	help
 	  If you say yes to this option, support will be included for the
 	  built-in I2C interface on the Renesas SH-Mobile processor.
@@ -956,6 +956,17 @@ config I2C_OCTEON
 	  This driver can also be built as a module.  If so, the module
 	  will be called i2c-octeon.
 
+config I2C_THUNDERX
+	tristate "Cavium ThunderX I2C bus support"
+	depends on 64BIT && PCI && (ARM64 || COMPILE_TEST)
+	select I2C_SMBUS
+	help
+	  Say yes if you want to support the I2C serial bus on Cavium
+	  ThunderX SOC.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called i2c-thunderx.
+
 config I2C_XILINX
 	tristate "Xilinx I2C Controller"
 	depends on HAS_IOMEM
diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
index 37f2819b4560..29764cc20a44 100644
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
@@ -91,7 +91,10 @@ obj-$(CONFIG_I2C_UNIPHIER)	+= i2c-uniphier.o
 obj-$(CONFIG_I2C_UNIPHIER_F)	+= i2c-uniphier-f.o
 obj-$(CONFIG_I2C_VERSATILE)	+= i2c-versatile.o
 obj-$(CONFIG_I2C_WMT)		+= i2c-wmt.o
+i2c-octeon-objs := i2c-octeon-core.o i2c-octeon-platdrv.o
 obj-$(CONFIG_I2C_OCTEON)	+= i2c-octeon.o
+i2c-thunderx-objs := i2c-octeon-core.o i2c-thunderx-pcidrv.o
+obj-$(CONFIG_I2C_THUNDERX)	+= i2c-thunderx.o
 obj-$(CONFIG_I2C_XILINX)	+= i2c-xiic.o
 obj-$(CONFIG_I2C_XLR)		+= i2c-xlr.o
 obj-$(CONFIG_I2C_XLP9XX)	+= i2c-xlp9xx.o
diff --git a/drivers/i2c/busses/i2c-amd756.c b/drivers/i2c/busses/i2c-amd756.c
index 6c7113d990f8..274908cd1fde 100644
--- a/drivers/i2c/busses/i2c-amd756.c
+++ b/drivers/i2c/busses/i2c-amd756.c
@@ -378,11 +378,8 @@ static int amd756_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 		 amd756_ioport);
 
 	error = i2c_add_adapter(&amd756_smbus);
-	if (error) {
-		dev_err(&pdev->dev,
-			"Adapter registration failed, module not inserted\n");
+	if (error)
 		goto out_err;
-	}
 
 	return 0;
 
diff --git a/drivers/i2c/busses/i2c-at91.c b/drivers/i2c/busses/i2c-at91.c
index 1bb97f658b47..0b86c6173e07 100644
--- a/drivers/i2c/busses/i2c-at91.c
+++ b/drivers/i2c/busses/i2c-at91.c
@@ -1122,8 +1122,6 @@ static int at91_twi_probe(struct platform_device *pdev)
 
 	rc = i2c_add_numbered_adapter(&dev->adapter);
 	if (rc) {
-		dev_err(dev->dev, "Adapter %s registration failed\n",
-			dev->adapter.name);
 		clk_disable_unprepare(dev->clk);
 
 		pm_runtime_disable(dev->dev);
diff --git a/drivers/i2c/busses/i2c-axxia.c b/drivers/i2c/busses/i2c-axxia.c
index c335cc7852f9..4351a9343058 100644
--- a/drivers/i2c/busses/i2c-axxia.c
+++ b/drivers/i2c/busses/i2c-axxia.c
@@ -545,7 +545,11 @@ static int axxia_i2c_probe(struct platform_device *pdev)
 		return ret;
 	}
 
-	clk_prepare_enable(idev->i2c_clk);
+	ret = clk_prepare_enable(idev->i2c_clk);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to enable clock\n");
+		return ret;
+	}
 
 	i2c_set_adapdata(&idev->adapter, idev);
 	strlcpy(idev->adapter.name, pdev->name, sizeof(idev->adapter.name));
@@ -560,7 +564,7 @@ static int axxia_i2c_probe(struct platform_device *pdev)
 
 	ret = i2c_add_adapter(&idev->adapter);
 	if (ret) {
-		dev_err(&pdev->dev, "failed to add adapter\n");
+		clk_disable_unprepare(idev->i2c_clk);
 		return ret;
 	}
 
diff --git a/drivers/i2c/busses/i2c-bcm-iproc.c b/drivers/i2c/busses/i2c-bcm-iproc.c
index 95f7cac76f89..326b3db02c48 100644
--- a/drivers/i2c/busses/i2c-bcm-iproc.c
+++ b/drivers/i2c/busses/i2c-bcm-iproc.c
@@ -488,13 +488,7 @@ static int bcm_iproc_i2c_probe(struct platform_device *pdev)
 	adap->dev.parent = &pdev->dev;
 	adap->dev.of_node = pdev->dev.of_node;
 
-	ret = i2c_add_adapter(adap);
-	if (ret) {
-		dev_err(iproc_i2c->device, "failed to add adapter\n");
-		return ret;
-	}
-
-	return 0;
+	return i2c_add_adapter(adap);
 }
 
 static int bcm_iproc_i2c_remove(struct platform_device *pdev)
diff --git a/drivers/i2c/busses/i2c-bcm-kona.c b/drivers/i2c/busses/i2c-bcm-kona.c
index 258cb9a40ab3..4e489a9d16fb 100644
--- a/drivers/i2c/busses/i2c-bcm-kona.c
+++ b/drivers/i2c/busses/i2c-bcm-kona.c
@@ -858,10 +858,8 @@ static int bcm_kona_i2c_probe(struct platform_device *pdev)
 	adap->dev.of_node = pdev->dev.of_node;
 
 	rc = i2c_add_adapter(adap);
-	if (rc) {
-		dev_err(dev->device, "failed to add adapter\n");
+	if (rc)
 		return rc;
-	}
 
 	dev_info(dev->device, "device registered successfully\n");
 
diff --git a/drivers/i2c/busses/i2c-bfin-twi.c b/drivers/i2c/busses/i2c-bfin-twi.c
index 025686d41640..29d00c4f7824 100644
--- a/drivers/i2c/busses/i2c-bfin-twi.c
+++ b/drivers/i2c/busses/i2c-bfin-twi.c
@@ -685,10 +685,8 @@ static int i2c_bfin_twi_probe(struct platform_device *pdev)
 	write_CONTROL(iface, read_CONTROL(iface) | TWI_ENA);
 
 	rc = i2c_add_numbered_adapter(p_adap);
-	if (rc < 0) {
-		dev_err(&pdev->dev, "Can't add i2c adapter!\n");
+	if (rc < 0)
 		goto out_error;
-	}
 
 	platform_set_drvdata(pdev, iface);
 
diff --git a/drivers/i2c/busses/i2c-brcmstb.c b/drivers/i2c/busses/i2c-brcmstb.c
index 385b57bfcb38..0652281662a8 100644
--- a/drivers/i2c/busses/i2c-brcmstb.c
+++ b/drivers/i2c/busses/i2c-brcmstb.c
@@ -648,10 +648,8 @@ static int brcmstb_i2c_probe(struct platform_device *pdev)
 	adap->dev.parent = &pdev->dev;
 	adap->dev.of_node = pdev->dev.of_node;
 	rc = i2c_add_adapter(adap);
-	if (rc) {
-		dev_err(dev->device, "failed to add adapter\n");
+	if (rc)
 		goto probe_errorout;
-	}
 
 	dev_info(dev->device, "%s@%dhz registered in %s mode\n",
 		 int_name ? int_name : " ", dev->clk_freq_hz,
diff --git a/drivers/i2c/busses/i2c-cadence.c b/drivers/i2c/busses/i2c-cadence.c
index 3c16a2f7c673..686971263bef 100644
--- a/drivers/i2c/busses/i2c-cadence.c
+++ b/drivers/i2c/busses/i2c-cadence.c
@@ -963,10 +963,8 @@ static int cdns_i2c_probe(struct platform_device *pdev)
 	}
 
 	ret = i2c_add_adapter(&id->adap);
-	if (ret < 0) {
-		dev_err(&pdev->dev, "reg adap failed: %d\n", ret);
+	if (ret < 0)
 		goto err_clk_dis;
-	}
 
 	/*
 	 * Cadence I2C controller has a bug wherein it generates
diff --git a/drivers/i2c/busses/i2c-cpm.c b/drivers/i2c/busses/i2c-cpm.c
index ee57c1e865e2..d89bde2c5da2 100644
--- a/drivers/i2c/busses/i2c-cpm.c
+++ b/drivers/i2c/busses/i2c-cpm.c
@@ -665,10 +665,8 @@ static int cpm_i2c_probe(struct platform_device *ofdev)
 	cpm->adap.nr = (data && len == 4) ? be32_to_cpup(data) : -1;
 	result = i2c_add_numbered_adapter(&cpm->adap);
 
-	if (result < 0) {
-		dev_err(&ofdev->dev, "Unable to register with I2C\n");
+	if (result < 0)
 		goto out_shut;
-	}
 
 	dev_dbg(&ofdev->dev, "hw routines for %s registered.\n",
 		cpm->adap.name);
diff --git a/drivers/i2c/busses/i2c-cros-ec-tunnel.c b/drivers/i2c/busses/i2c-cros-ec-tunnel.c
index 2d5ff86398d0..9b36a7b3befd 100644
--- a/drivers/i2c/busses/i2c-cros-ec-tunnel.c
+++ b/drivers/i2c/busses/i2c-cros-ec-tunnel.c
@@ -281,10 +281,8 @@ static int ec_i2c_probe(struct platform_device *pdev)
 	bus->adap.retries = I2C_MAX_RETRIES;
 
 	err = i2c_add_adapter(&bus->adap);
-	if (err) {
-		dev_err(dev, "cannot register i2c adapter\n");
+	if (err)
 		return err;
-	}
 	platform_set_drvdata(pdev, bus);
 
 	return err;
diff --git a/drivers/i2c/busses/i2c-davinci.c b/drivers/i2c/busses/i2c-davinci.c
index a8bdcb5292f5..9e7ef5cf5d49 100644
--- a/drivers/i2c/busses/i2c-davinci.c
+++ b/drivers/i2c/busses/i2c-davinci.c
@@ -846,10 +846,8 @@ static int davinci_i2c_probe(struct platform_device *pdev)
 
 	adap->nr = pdev->id;
 	r = i2c_add_numbered_adapter(adap);
-	if (r) {
-		dev_err(&pdev->dev, "failure adding adapter\n");
+	if (r)
 		goto err_unuse_clocks;
-	}
 
 	return 0;
 
diff --git a/drivers/i2c/busses/i2c-designware-core.c b/drivers/i2c/busses/i2c-designware-core.c
index fcd973d5131e..1fe93c43215c 100644
--- a/drivers/i2c/busses/i2c-designware-core.c
+++ b/drivers/i2c/busses/i2c-designware-core.c
@@ -42,6 +42,8 @@
 #define DW_IC_SS_SCL_LCNT	0x18
 #define DW_IC_FS_SCL_HCNT	0x1c
 #define DW_IC_FS_SCL_LCNT	0x20
+#define DW_IC_HS_SCL_HCNT	0x24
+#define DW_IC_HS_SCL_LCNT	0x28
 #define DW_IC_INTR_STAT		0x2c
 #define DW_IC_INTR_MASK		0x30
 #define DW_IC_RAW_INTR_STAT	0x34
@@ -89,12 +91,17 @@
 					 DW_IC_INTR_TX_ABRT | \
 					 DW_IC_INTR_STOP_DET)
 
-#define DW_IC_STATUS_ACTIVITY	0x1
+#define DW_IC_STATUS_ACTIVITY		0x1
+#define DW_IC_STATUS_TFE		BIT(2)
+#define DW_IC_STATUS_MST_ACTIVITY	BIT(5)
 
 #define DW_IC_ERR_TX_ABRT	0x1
 
 #define DW_IC_TAR_10BITADDR_MASTER BIT(12)
 
+#define DW_IC_COMP_PARAM_1_SPEED_MODE_HIGH	(BIT(2) | BIT(3))
+#define DW_IC_COMP_PARAM_1_SPEED_MODE_MASK	GENMASK(3, 2)
+
 /*
  * status codes
  */
@@ -252,10 +259,15 @@ static u32 i2c_dw_scl_lcnt(u32 ic_clk, u32 tLOW, u32 tf, int offset)
 
 static void __i2c_dw_enable(struct dw_i2c_dev *dev, bool enable)
 {
+	dw_writel(dev, enable, DW_IC_ENABLE);
+}
+
+static void __i2c_dw_enable_and_wait(struct dw_i2c_dev *dev, bool enable)
+{
 	int timeout = 100;
 
 	do {
-		dw_writel(dev, enable, DW_IC_ENABLE);
+		__i2c_dw_enable(dev, enable);
 		if ((dw_readl(dev, DW_IC_ENABLE_STATUS) & 1) == enable)
 			return;
 
@@ -282,6 +294,28 @@ static unsigned long i2c_dw_clk_rate(struct dw_i2c_dev *dev)
 	return dev->get_clk_rate_khz(dev);
 }
 
+static int i2c_dw_acquire_lock(struct dw_i2c_dev *dev)
+{
+	int ret;
+
+	if (!dev->acquire_lock)
+		return 0;
+
+	ret = dev->acquire_lock(dev);
+	if (!ret)
+		return 0;
+
+	dev_err(dev->dev, "couldn't acquire bus ownership\n");
+
+	return ret;
+}
+
+static void i2c_dw_release_lock(struct dw_i2c_dev *dev)
+{
+	if (dev->release_lock)
+		dev->release_lock(dev);
+}
+
 /**
  * i2c_dw_init() - initialize the designware i2c master hardware
  * @dev: device private data
@@ -293,17 +327,13 @@ static unsigned long i2c_dw_clk_rate(struct dw_i2c_dev *dev)
 int i2c_dw_init(struct dw_i2c_dev *dev)
 {
 	u32 hcnt, lcnt;
-	u32 reg;
+	u32 reg, comp_param1;
 	u32 sda_falling_time, scl_falling_time;
 	int ret;
 
-	if (dev->acquire_lock) {
-		ret = dev->acquire_lock(dev);
-		if (ret) {
-			dev_err(dev->dev, "couldn't acquire bus ownership\n");
-			return ret;
-		}
-	}
+	ret = i2c_dw_acquire_lock(dev);
+	if (ret)
+		return ret;
 
 	reg = dw_readl(dev, DW_IC_COMP_TYPE);
 	if (reg == ___constant_swab32(DW_IC_COMP_TYPE_VALUE)) {
@@ -315,13 +345,14 @@ int i2c_dw_init(struct dw_i2c_dev *dev)
 	} else if (reg != DW_IC_COMP_TYPE_VALUE) {
 		dev_err(dev->dev, "Unknown Synopsys component type: "
 			"0x%08x\n", reg);
-		if (dev->release_lock)
-			dev->release_lock(dev);
+		i2c_dw_release_lock(dev);
 		return -ENODEV;
 	}
 
+	comp_param1 = dw_readl(dev, DW_IC_COMP_PARAM_1);
+
 	/* Disable the adapter */
-	__i2c_dw_enable(dev, false);
+	__i2c_dw_enable_and_wait(dev, false);
 
 	/* set standard and fast speed deviders for high/low periods */
 
@@ -347,8 +378,11 @@ int i2c_dw_init(struct dw_i2c_dev *dev)
 	dw_writel(dev, lcnt, DW_IC_SS_SCL_LCNT);
 	dev_dbg(dev->dev, "Standard-mode HCNT:LCNT = %d:%d\n", hcnt, lcnt);
 
-	/* Set SCL timing parameters for fast-mode */
-	if (dev->fs_hcnt && dev->fs_lcnt) {
+	/* Set SCL timing parameters for fast-mode or fast-mode plus */
+	if ((dev->clk_freq == 1000000) && dev->fp_hcnt && dev->fp_lcnt) {
+		hcnt = dev->fp_hcnt;
+		lcnt = dev->fp_lcnt;
+	} else if (dev->fs_hcnt && dev->fs_lcnt) {
 		hcnt = dev->fs_hcnt;
 		lcnt = dev->fs_lcnt;
 	} else {
@@ -366,6 +400,23 @@ int i2c_dw_init(struct dw_i2c_dev *dev)
 	dw_writel(dev, lcnt, DW_IC_FS_SCL_LCNT);
 	dev_dbg(dev->dev, "Fast-mode HCNT:LCNT = %d:%d\n", hcnt, lcnt);
 
+	if ((dev->master_cfg & DW_IC_CON_SPEED_MASK) ==
+		DW_IC_CON_SPEED_HIGH) {
+		if ((comp_param1 & DW_IC_COMP_PARAM_1_SPEED_MODE_MASK)
+			!= DW_IC_COMP_PARAM_1_SPEED_MODE_HIGH) {
+			dev_err(dev->dev, "High Speed not supported!\n");
+			dev->master_cfg &= ~DW_IC_CON_SPEED_MASK;
+			dev->master_cfg |= DW_IC_CON_SPEED_FAST;
+		} else if (dev->hs_hcnt && dev->hs_lcnt) {
+			hcnt = dev->hs_hcnt;
+			lcnt = dev->hs_lcnt;
+			dw_writel(dev, hcnt, DW_IC_HS_SCL_HCNT);
+			dw_writel(dev, lcnt, DW_IC_HS_SCL_LCNT);
+			dev_dbg(dev->dev, "HighSpeed-mode HCNT:LCNT = %d:%d\n",
+				hcnt, lcnt);
+		}
+	}
+
 	/* Configure SDA Hold Time if required */
 	reg = dw_readl(dev, DW_IC_COMP_VERSION);
 	if (reg >= DW_IC_SDA_HOLD_MIN_VERS) {
@@ -387,8 +438,8 @@ int i2c_dw_init(struct dw_i2c_dev *dev)
 	/* configure the i2c master */
 	dw_writel(dev, dev->master_cfg , DW_IC_CON);
 
-	if (dev->release_lock)
-		dev->release_lock(dev);
+	i2c_dw_release_lock(dev);
+
 	return 0;
 }
 EXPORT_SYMBOL_GPL(i2c_dw_init);
@@ -415,27 +466,45 @@ static int i2c_dw_wait_bus_not_busy(struct dw_i2c_dev *dev)
 static void i2c_dw_xfer_init(struct dw_i2c_dev *dev)
 {
 	struct i2c_msg *msgs = dev->msgs;
-	u32 ic_con, ic_tar = 0;
+	u32 ic_tar = 0;
+	bool enabled;
 
-	/* Disable the adapter */
-	__i2c_dw_enable(dev, false);
+	enabled = dw_readl(dev, DW_IC_ENABLE_STATUS) & 1;
+
+	if (enabled) {
+		u32 ic_status;
+
+		/*
+		 * Only disable adapter if ic_tar and ic_con can't be
+		 * dynamically updated
+		 */
+		ic_status = dw_readl(dev, DW_IC_STATUS);
+		if (!dev->dynamic_tar_update_enabled ||
+		    (ic_status & DW_IC_STATUS_MST_ACTIVITY) ||
+		    !(ic_status & DW_IC_STATUS_TFE)) {
+			__i2c_dw_enable_and_wait(dev, false);
+			enabled = false;
+		}
+	}
 
 	/* if the slave address is ten bit address, enable 10BITADDR */
-	ic_con = dw_readl(dev, DW_IC_CON);
-	if (msgs[dev->msg_write_idx].flags & I2C_M_TEN) {
-		ic_con |= DW_IC_CON_10BITADDR_MASTER;
+	if (dev->dynamic_tar_update_enabled) {
 		/*
 		 * If I2C_DYNAMIC_TAR_UPDATE is set, the 10-bit addressing
-		 * mode has to be enabled via bit 12 of IC_TAR register.
-		 * We set it always as I2C_DYNAMIC_TAR_UPDATE can't be
-		 * detected from registers.
+		 * mode has to be enabled via bit 12 of IC_TAR register,
+		 * otherwise bit 4 of IC_CON is used.
 		 */
-		ic_tar = DW_IC_TAR_10BITADDR_MASTER;
+		if (msgs[dev->msg_write_idx].flags & I2C_M_TEN)
+			ic_tar = DW_IC_TAR_10BITADDR_MASTER;
 	} else {
-		ic_con &= ~DW_IC_CON_10BITADDR_MASTER;
-	}
+		u32 ic_con = dw_readl(dev, DW_IC_CON);
 
-	dw_writel(dev, ic_con, DW_IC_CON);
+		if (msgs[dev->msg_write_idx].flags & I2C_M_TEN)
+			ic_con |= DW_IC_CON_10BITADDR_MASTER;
+		else
+			ic_con &= ~DW_IC_CON_10BITADDR_MASTER;
+		dw_writel(dev, ic_con, DW_IC_CON);
+	}
 
 	/*
 	 * Set the slave (target) address and enable 10-bit addressing mode
@@ -446,8 +515,8 @@ static void i2c_dw_xfer_init(struct dw_i2c_dev *dev)
 	/* enforce disabled interrupts (due to HW issues) */
 	i2c_dw_disable_int(dev);
 
-	/* Enable the adapter */
-	__i2c_dw_enable(dev, true);
+	if (!enabled)
+		__i2c_dw_enable(dev, true);
 
 	/* Clear and enable interrupts */
 	dw_readl(dev, DW_IC_CLR_INTR);
@@ -628,7 +697,8 @@ static int i2c_dw_handle_tx_abort(struct dw_i2c_dev *dev)
 }
 
 /*
- * Prepare controller for a transaction and call i2c_dw_xfer_msg
+ * Prepare controller for a transaction and start transfer by calling
+ * i2c_dw_xfer_init()
  */
 static int
 i2c_dw_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
@@ -651,13 +721,9 @@ i2c_dw_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
 	dev->abort_source = 0;
 	dev->rx_outstanding = 0;
 
-	if (dev->acquire_lock) {
-		ret = dev->acquire_lock(dev);
-		if (ret) {
-			dev_err(dev->dev, "couldn't acquire bus ownership\n");
-			goto done_nolock;
-		}
-	}
+	ret = i2c_dw_acquire_lock(dev);
+	if (ret)
+		goto done_nolock;
 
 	ret = i2c_dw_wait_bus_not_busy(dev);
 	if (ret < 0)
@@ -675,16 +741,6 @@ i2c_dw_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
 		goto done;
 	}
 
-	/*
-	 * We must disable the adapter before returning and signaling the end
-	 * of the current transfer. Otherwise the hardware might continue
-	 * generating interrupts which in turn causes a race condition with
-	 * the following transfer.  Needs some more investigation if the
-	 * additional interrupts are a hardware bug or this driver doesn't
-	 * handle them correctly yet.
-	 */
-	__i2c_dw_enable(dev, false);
-
 	if (dev->msg_err) {
 		ret = dev->msg_err;
 		goto done;
@@ -704,8 +760,7 @@ i2c_dw_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
 	ret = -EIO;
 
 done:
-	if (dev->release_lock)
-		dev->release_lock(dev);
+	i2c_dw_release_lock(dev);
 
 done_nolock:
 	pm_runtime_mark_last_busy(dev->dev);
@@ -822,9 +877,19 @@ static irqreturn_t i2c_dw_isr(int this_irq, void *dev_id)
 	 */
 
 tx_aborted:
-	if ((stat & (DW_IC_INTR_TX_ABRT | DW_IC_INTR_STOP_DET)) || dev->msg_err)
+	if ((stat & (DW_IC_INTR_TX_ABRT | DW_IC_INTR_STOP_DET))
+			|| dev->msg_err) {
+		/*
+		 * We must disable interruts before returning and signaling
+		 * the end of the current transfer. Otherwise the hardware
+		 * might continue generating interrupts for non-existent
+		 * transfers.
+		 */
+		i2c_dw_disable_int(dev);
+		dw_readl(dev, DW_IC_CLR_INTR);
+
 		complete(&dev->cmd_complete);
-	else if (unlikely(dev->accessor_flags & ACCESS_INTR_MASK)) {
+	} else if (unlikely(dev->accessor_flags & ACCESS_INTR_MASK)) {
 		/* workaround to trigger pending interrupt */
 		stat = dw_readl(dev, DW_IC_INTR_MASK);
 		i2c_dw_disable_int(dev);
@@ -837,7 +902,7 @@ tx_aborted:
 void i2c_dw_disable(struct dw_i2c_dev *dev)
 {
 	/* Disable controller */
-	__i2c_dw_enable(dev, false);
+	__i2c_dw_enable_and_wait(dev, false);
 
 	/* Disable all interupts */
 	dw_writel(dev, 0, DW_IC_INTR_MASK);
@@ -861,6 +926,7 @@ int i2c_dw_probe(struct dw_i2c_dev *dev)
 {
 	struct i2c_adapter *adap = &dev->adapter;
 	int r;
+	u32 reg;
 
 	init_completion(&dev->cmd_complete);
 
@@ -868,6 +934,26 @@ int i2c_dw_probe(struct dw_i2c_dev *dev)
 	if (r)
 		return r;
 
+	r = i2c_dw_acquire_lock(dev);
+	if (r)
+		return r;
+
+	/*
+	 * Test if dynamic TAR update is enabled in this controller by writing
+	 * to IC_10BITADDR_MASTER field in IC_CON: when it is enabled this
+	 * field is read-only so it should not succeed
+	 */
+	reg = dw_readl(dev, DW_IC_CON);
+	dw_writel(dev, reg ^ DW_IC_CON_10BITADDR_MASTER, DW_IC_CON);
+
+	if ((dw_readl(dev, DW_IC_CON) & DW_IC_CON_10BITADDR_MASTER) ==
+	    (reg & DW_IC_CON_10BITADDR_MASTER)) {
+		dev->dynamic_tar_update_enabled = true;
+		dev_dbg(dev->dev, "Dynamic TAR update enabled");
+	}
+
+	i2c_dw_release_lock(dev);
+
 	snprintf(adap->name, sizeof(adap->name),
 		 "Synopsys DesignWare I2C adapter");
 	adap->retries = 3;
diff --git a/drivers/i2c/busses/i2c-designware-core.h b/drivers/i2c/busses/i2c-designware-core.h
index 38493a7142ad..0d44d2ae7d4c 100644
--- a/drivers/i2c/busses/i2c-designware-core.h
+++ b/drivers/i2c/busses/i2c-designware-core.h
@@ -26,6 +26,7 @@
 #define DW_IC_CON_MASTER		0x1
 #define DW_IC_CON_SPEED_STD		0x2
 #define DW_IC_CON_SPEED_FAST		0x4
+#define DW_IC_CON_SPEED_HIGH		0x6
 #define DW_IC_CON_SPEED_MASK		0x6
 #define DW_IC_CON_10BITADDR_MASTER	0x10
 #define DW_IC_CON_RESTART_EN		0x20
@@ -57,10 +58,15 @@
  * @tx_fifo_depth: depth of the hardware tx fifo
  * @rx_fifo_depth: depth of the hardware rx fifo
  * @rx_outstanding: current master-rx elements in tx fifo
+ * @clk_freq: bus clock frequency
  * @ss_hcnt: standard speed HCNT value
  * @ss_lcnt: standard speed LCNT value
  * @fs_hcnt: fast speed HCNT value
  * @fs_lcnt: fast speed LCNT value
+ * @fp_hcnt: fast plus HCNT value
+ * @fp_lcnt: fast plus LCNT value
+ * @hs_hcnt: high speed HCNT value
+ * @hs_lcnt: high speed LCNT value
  * @acquire_lock: function to acquire a hardware lock on the bus
  * @release_lock: function to release a hardware lock on the bus
  * @pm_runtime_disabled: true if pm runtime is disabled
@@ -96,6 +102,7 @@ struct dw_i2c_dev {
 	unsigned int		tx_fifo_depth;
 	unsigned int		rx_fifo_depth;
 	int			rx_outstanding;
+	u32			clk_freq;
 	u32			sda_hold_time;
 	u32			sda_falling_time;
 	u32			scl_falling_time;
@@ -103,9 +110,14 @@ struct dw_i2c_dev {
 	u16			ss_lcnt;
 	u16			fs_hcnt;
 	u16			fs_lcnt;
+	u16			fp_hcnt;
+	u16			fp_lcnt;
+	u16			hs_hcnt;
+	u16			hs_lcnt;
 	int			(*acquire_lock)(struct dw_i2c_dev *dev);
 	void			(*release_lock)(struct dw_i2c_dev *dev);
 	bool			pm_runtime_disabled;
+	bool			dynamic_tar_update_enabled;
 };
 
 #define ACCESS_SWAP		0x00000001
diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c
index d656657b805c..0b42a12171f3 100644
--- a/drivers/i2c/busses/i2c-designware-platdrv.c
+++ b/drivers/i2c/busses/i2c-designware-platdrv.c
@@ -107,6 +107,8 @@ static int dw_i2c_acpi_configure(struct platform_device *pdev)
 	dw_i2c_acpi_params(pdev, "SSCN", &dev->ss_hcnt, &dev->ss_lcnt, NULL);
 	dw_i2c_acpi_params(pdev, "FMCN", &dev->fs_hcnt, &dev->fs_lcnt,
 			   &dev->sda_hold_time);
+	dw_i2c_acpi_params(pdev, "FPCN", &dev->fp_hcnt, &dev->fp_lcnt, NULL);
+	dw_i2c_acpi_params(pdev, "HSCN", &dev->hs_hcnt, &dev->hs_lcnt, NULL);
 
 	id = acpi_match_device(pdev->dev.driver->acpi_match_table, &pdev->dev);
 	if (id && id->driver_data)
@@ -155,7 +157,7 @@ static int dw_i2c_plat_probe(struct platform_device *pdev)
 	struct i2c_adapter *adap;
 	struct resource *mem;
 	int irq, r;
-	u32 clk_freq, ht = 0;
+	u32 acpi_speed, ht = 0;
 
 	irq = platform_get_irq(pdev, 0);
 	if (irq < 0)
@@ -175,10 +177,10 @@ static int dw_i2c_plat_probe(struct platform_device *pdev)
 	platform_set_drvdata(pdev, dev);
 
 	/* fast mode by default because of legacy reasons */
-	clk_freq = 400000;
+	dev->clk_freq = 400000;
 
 	if (pdata) {
-		clk_freq = pdata->i2c_scl_freq;
+		dev->clk_freq = pdata->i2c_scl_freq;
 	} else {
 		device_property_read_u32(&pdev->dev, "i2c-sda-hold-time-ns",
 					 &ht);
@@ -187,17 +189,24 @@ static int dw_i2c_plat_probe(struct platform_device *pdev)
 		device_property_read_u32(&pdev->dev, "i2c-scl-falling-time-ns",
 					 &dev->scl_falling_time);
 		device_property_read_u32(&pdev->dev, "clock-frequency",
-					 &clk_freq);
+					 &dev->clk_freq);
 	}
 
+	acpi_speed = i2c_acpi_find_bus_speed(&pdev->dev);
+	if (acpi_speed)
+		dev->clk_freq = acpi_speed;
+
 	if (has_acpi_companion(&pdev->dev))
 		dw_i2c_acpi_configure(pdev);
 
 	/*
-	 * Only standard mode at 100kHz and fast mode at 400kHz are supported.
+	 * Only standard mode at 100kHz, fast mode at 400kHz,
+	 * fast mode plus at 1MHz and high speed mode at 3.4MHz are supported.
 	 */
-	if (clk_freq != 100000 && clk_freq != 400000) {
-		dev_err(&pdev->dev, "Only 100kHz and 400kHz supported");
+	if (dev->clk_freq != 100000 && dev->clk_freq != 400000
+	    && dev->clk_freq != 1000000 && dev->clk_freq != 3400000) {
+		dev_err(&pdev->dev,
+			"Only 100kHz, 400kHz, 1MHz and 3.4MHz supported");
 		return -EINVAL;
 	}
 
@@ -212,12 +221,20 @@ static int dw_i2c_plat_probe(struct platform_device *pdev)
 		I2C_FUNC_SMBUS_BYTE_DATA |
 		I2C_FUNC_SMBUS_WORD_DATA |
 		I2C_FUNC_SMBUS_I2C_BLOCK;
-	if (clk_freq == 100000)
-		dev->master_cfg =  DW_IC_CON_MASTER | DW_IC_CON_SLAVE_DISABLE |
-			DW_IC_CON_RESTART_EN | DW_IC_CON_SPEED_STD;
-	else
-		dev->master_cfg =  DW_IC_CON_MASTER | DW_IC_CON_SLAVE_DISABLE |
-			DW_IC_CON_RESTART_EN | DW_IC_CON_SPEED_FAST;
+
+	dev->master_cfg = DW_IC_CON_MASTER | DW_IC_CON_SLAVE_DISABLE |
+			  DW_IC_CON_RESTART_EN;
+
+	switch (dev->clk_freq) {
+	case 100000:
+		dev->master_cfg |= DW_IC_CON_SPEED_STD;
+		break;
+	case 3400000:
+		dev->master_cfg |= DW_IC_CON_SPEED_HIGH;
+		break;
+	default:
+		dev->master_cfg |= DW_IC_CON_SPEED_FAST;
+	}
 
 	dev->clk = devm_clk_get(&pdev->dev, NULL);
 	if (!i2c_dw_plat_prepare_clk(dev, true)) {
diff --git a/drivers/i2c/busses/i2c-diolan-u2c.c b/drivers/i2c/busses/i2c-diolan-u2c.c
index b19a310bf9b3..f718ee4e3332 100644
--- a/drivers/i2c/busses/i2c-diolan-u2c.c
+++ b/drivers/i2c/busses/i2c-diolan-u2c.c
@@ -487,10 +487,8 @@ static int diolan_u2c_probe(struct usb_interface *interface,
 
 	/* and finally attach to i2c layer */
 	ret = i2c_add_adapter(&dev->adapter);
-	if (ret < 0) {
-		dev_err(&interface->dev, "failed to add I2C adapter\n");
+	if (ret < 0)
 		goto error_free;
-	}
 
 	dev_dbg(&interface->dev, "connected " DRIVER_NAME "\n");
 
diff --git a/drivers/i2c/busses/i2c-dln2.c b/drivers/i2c/busses/i2c-dln2.c
index f2eb4f76591f..8acda2aa1558 100644
--- a/drivers/i2c/busses/i2c-dln2.c
+++ b/drivers/i2c/busses/i2c-dln2.c
@@ -228,10 +228,8 @@ static int dln2_i2c_probe(struct platform_device *pdev)
 
 	/* and finally attach to i2c layer */
 	ret = i2c_add_adapter(&dln2->adapter);
-	if (ret < 0) {
-		dev_err(dev, "failed to add I2C adapter: %d\n", ret);
+	if (ret < 0)
 		goto out_disable;
-	}
 
 	return 0;
 
diff --git a/drivers/i2c/busses/i2c-efm32.c b/drivers/i2c/busses/i2c-efm32.c
index e253598d764c..aa336ba89aa3 100644
--- a/drivers/i2c/busses/i2c-efm32.c
+++ b/drivers/i2c/busses/i2c-efm32.c
@@ -438,7 +438,6 @@ static int efm32_i2c_probe(struct platform_device *pdev)
 
 	ret = i2c_add_adapter(&ddata->adapter);
 	if (ret) {
-		dev_err(&pdev->dev, "failed to add i2c adapter (%d)\n", ret);
 		free_irq(ddata->irq, ddata);
 
 err_disable_clk:
diff --git a/drivers/i2c/busses/i2c-exynos5.c b/drivers/i2c/busses/i2c-exynos5.c
index c0e3ada02876..bea607149972 100644
--- a/drivers/i2c/busses/i2c-exynos5.c
+++ b/drivers/i2c/busses/i2c-exynos5.c
@@ -796,10 +796,8 @@ static int exynos5_i2c_probe(struct platform_device *pdev)
 	exynos5_i2c_reset(i2c);
 
 	ret = i2c_add_adapter(&i2c->adap);
-	if (ret < 0) {
-		dev_err(&pdev->dev, "failed to add bus to i2c core\n");
+	if (ret < 0)
 		goto err_clk;
-	}
 
 	platform_set_drvdata(pdev, i2c);
 
diff --git a/drivers/i2c/busses/i2c-hix5hd2.c b/drivers/i2c/busses/i2c-hix5hd2.c
index 7c6966434ee7..ae7f3180f7e8 100644
--- a/drivers/i2c/busses/i2c-hix5hd2.c
+++ b/drivers/i2c/busses/i2c-hix5hd2.c
@@ -478,10 +478,8 @@ static int hix5hd2_i2c_probe(struct platform_device *pdev)
 	pm_runtime_enable(priv->dev);
 
 	ret = i2c_add_adapter(&priv->adap);
-	if (ret < 0) {
-		dev_err(&pdev->dev, "failed to add bus to i2c core\n");
+	if (ret < 0)
 		goto err_runtime;
-	}
 
 	return ret;
 
diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index 26298af73232..08847e8b8998 100644
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -64,6 +64,7 @@
  * Broxton (SOC)		0x5ad4	32	hard	yes	yes	yes
  * Lewisburg (PCH)		0xa1a3	32	hard	yes	yes	yes
  * Lewisburg Supersku (PCH)	0xa223	32	hard	yes	yes	yes
+ * Kaby Lake PCH-H (PCH)	0xa2a3	32	hard	yes	yes	yes
  *
  * Features supported by this driver:
  * Software PEC				no
@@ -226,6 +227,7 @@
 #define PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_SMBUS	0xa123
 #define PCI_DEVICE_ID_INTEL_LEWISBURG_SMBUS		0xa1a3
 #define PCI_DEVICE_ID_INTEL_LEWISBURG_SSKU_SMBUS	0xa223
+#define PCI_DEVICE_ID_INTEL_KABYLAKE_PCH_H_SMBUS	0xa2a3
 
 struct i801_mux_config {
 	char *gpio_chip;
@@ -1006,6 +1008,7 @@ static const struct pci_device_id i801_ids[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BROXTON_SMBUS) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_LEWISBURG_SMBUS) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_LEWISBURG_SSKU_SMBUS) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_KABYLAKE_PCH_H_SMBUS) },
 	{ 0, }
 };
 
@@ -1482,6 +1485,7 @@ static int i801_probe(struct pci_dev *dev, const struct pci_device_id *id)
 	case PCI_DEVICE_ID_INTEL_LEWISBURG_SMBUS:
 	case PCI_DEVICE_ID_INTEL_LEWISBURG_SSKU_SMBUS:
 	case PCI_DEVICE_ID_INTEL_DNV_SMBUS:
+	case PCI_DEVICE_ID_INTEL_KABYLAKE_PCH_H_SMBUS:
 		priv->features |= FEATURE_I2C_BLOCK_READ;
 		priv->features |= FEATURE_IRQ;
 		priv->features |= FEATURE_SMBUS_PEC;
@@ -1615,7 +1619,6 @@ static int i801_probe(struct pci_dev *dev, const struct pci_device_id *id)
 		"SMBus I801 adapter at %04lx", priv->smba);
 	err = i2c_add_adapter(&priv->adapter);
 	if (err) {
-		dev_err(&dev->dev, "Failed to add SMBus adapter\n");
 		i801_acpi_remove(priv);
 		return err;
 	}
diff --git a/drivers/i2c/busses/i2c-ibm_iic.c b/drivers/i2c/busses/i2c-ibm_iic.c
index cdaa7be2cd1b..412b91d255ad 100644
--- a/drivers/i2c/busses/i2c-ibm_iic.c
+++ b/drivers/i2c/busses/i2c-ibm_iic.c
@@ -751,10 +751,8 @@ static int iic_probe(struct platform_device *ofdev)
 	adap->timeout = HZ;
 
 	ret = i2c_add_adapter(adap);
-	if (ret  < 0) {
-		dev_err(&ofdev->dev, "failed to register i2c adapter\n");
+	if (ret  < 0)
 		goto error_cleanup;
-	}
 
 	dev_info(&ofdev->dev, "using %s mode\n",
 		 dev->fast_mode ? "fast (400 kHz)" : "standard (100 kHz)");
diff --git a/drivers/i2c/busses/i2c-img-scb.c b/drivers/i2c/busses/i2c-img-scb.c
index ea20425b6972..db8e8b40569d 100644
--- a/drivers/i2c/busses/i2c-img-scb.c
+++ b/drivers/i2c/busses/i2c-img-scb.c
@@ -1394,10 +1394,8 @@ static int img_i2c_probe(struct platform_device *pdev)
 		goto disable_clk;
 
 	ret = i2c_add_numbered_adapter(&i2c->adap);
-	if (ret < 0) {
-		dev_err(&pdev->dev, "failed to add adapter\n");
+	if (ret < 0)
 		goto disable_clk;
-	}
 
 	return 0;
 
diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c
index 1844bc9f7cd5..592a8f26a708 100644
--- a/drivers/i2c/busses/i2c-imx.c
+++ b/drivers/i2c/busses/i2c-imx.c
@@ -984,11 +984,24 @@ static void i2c_imx_unprepare_recovery(struct i2c_adapter *adap)
 	pinctrl_select_state(i2c_imx->pinctrl, i2c_imx->pinctrl_pins_default);
 }
 
-static void i2c_imx_init_recovery_info(struct imx_i2c_struct *i2c_imx,
+/*
+ * We switch SCL and SDA to their GPIO function and do some bitbanging
+ * for bus recovery. These alternative pinmux settings can be
+ * described in the device tree by a separate pinctrl state "gpio". If
+ * this is missing this is not a big problem, the only implication is
+ * that we can't do bus recovery.
+ */
+static int i2c_imx_init_recovery_info(struct imx_i2c_struct *i2c_imx,
 		struct platform_device *pdev)
 {
 	struct i2c_bus_recovery_info *rinfo = &i2c_imx->rinfo;
 
+	i2c_imx->pinctrl = devm_pinctrl_get(&pdev->dev);
+	if (!i2c_imx->pinctrl || IS_ERR(i2c_imx->pinctrl)) {
+		dev_info(&pdev->dev, "can't get pinctrl, bus recovery not supported\n");
+		return PTR_ERR(i2c_imx->pinctrl);
+	}
+
 	i2c_imx->pinctrl_pins_default = pinctrl_lookup_state(i2c_imx->pinctrl,
 			PINCTRL_STATE_DEFAULT);
 	i2c_imx->pinctrl_pins_gpio = pinctrl_lookup_state(i2c_imx->pinctrl,
@@ -1001,7 +1014,7 @@ static void i2c_imx_init_recovery_info(struct imx_i2c_struct *i2c_imx,
 	    IS_ERR(i2c_imx->pinctrl_pins_default) ||
 	    IS_ERR(i2c_imx->pinctrl_pins_gpio)) {
 		dev_dbg(&pdev->dev, "recovery information incomplete\n");
-		return;
+		return 0;
 	}
 
 	dev_dbg(&pdev->dev, "using scl-gpio %d and sda-gpio %d for recovery\n",
@@ -1011,6 +1024,8 @@ static void i2c_imx_init_recovery_info(struct imx_i2c_struct *i2c_imx,
 	rinfo->unprepare_recovery = i2c_imx_unprepare_recovery;
 	rinfo->recover_bus = i2c_generic_gpio_recovery;
 	i2c_imx->adapter.bus_recovery_info = rinfo;
+
+	return 0;
 }
 
 static u32 i2c_imx_func(struct i2c_adapter *adapter)
@@ -1081,12 +1096,6 @@ static int i2c_imx_probe(struct platform_device *pdev)
 		return ret;
 	}
 
-	i2c_imx->pinctrl = devm_pinctrl_get(&pdev->dev);
-	if (IS_ERR(i2c_imx->pinctrl)) {
-		ret = PTR_ERR(i2c_imx->pinctrl);
-		goto clk_disable;
-	}
-
 	/* Request IRQ */
 	ret = devm_request_irq(&pdev->dev, irq, i2c_imx_isr, 0,
 				pdev->name, i2c_imx);
@@ -1125,14 +1134,16 @@ static int i2c_imx_probe(struct platform_device *pdev)
 			i2c_imx, IMX_I2C_I2CR);
 	imx_i2c_write_reg(i2c_imx->hwdata->i2sr_clr_opcode, i2c_imx, IMX_I2C_I2SR);
 
-	i2c_imx_init_recovery_info(i2c_imx, pdev);
+	/* Init optional bus recovery function */
+	ret = i2c_imx_init_recovery_info(i2c_imx, pdev);
+	/* Give it another chance if pinctrl used is not ready yet */
+	if (ret == -EPROBE_DEFER)
+		goto rpm_disable;
 
 	/* Add I2C adapter */
 	ret = i2c_add_numbered_adapter(&i2c_imx->adapter);
-	if (ret < 0) {
-		dev_err(&pdev->dev, "registration failed\n");
+	if (ret < 0)
 		goto rpm_disable;
-	}
 
 	pm_runtime_mark_last_busy(&pdev->dev);
 	pm_runtime_put_autosuspend(&pdev->dev);
diff --git a/drivers/i2c/busses/i2c-isch.c b/drivers/i2c/busses/i2c-isch.c
index c2f25f19d76f..0cf1379f4e80 100644
--- a/drivers/i2c/busses/i2c-isch.c
+++ b/drivers/i2c/busses/i2c-isch.c
@@ -288,10 +288,8 @@ static int smbus_sch_probe(struct platform_device *dev)
 		"SMBus SCH adapter at %04x", sch_smba);
 
 	retval = i2c_add_adapter(&sch_adapter);
-	if (retval) {
-		dev_err(&dev->dev, "Couldn't register adapter!\n");
+	if (retval)
 		sch_smba = 0;
-	}
 
 	return retval;
 }
diff --git a/drivers/i2c/busses/i2c-ismt.c b/drivers/i2c/busses/i2c-ismt.c
index 1c8707710098..f573448d2132 100644
--- a/drivers/i2c/busses/i2c-ismt.c
+++ b/drivers/i2c/busses/i2c-ismt.c
@@ -922,10 +922,8 @@ ismt_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 		return err;
 
 	err = i2c_add_adapter(&priv->adapter);
-	if (err) {
-		dev_err(&pdev->dev, "Failed to add SMBus iSMT adapter\n");
+	if (err)
 		return -ENODEV;
-	}
 	return 0;
 }
 
diff --git a/drivers/i2c/busses/i2c-jz4780.c b/drivers/i2c/busses/i2c-jz4780.c
index cd9872594fe2..b8ea62105f42 100644
--- a/drivers/i2c/busses/i2c-jz4780.c
+++ b/drivers/i2c/busses/i2c-jz4780.c
@@ -798,10 +798,8 @@ static int jz4780_i2c_probe(struct platform_device *pdev)
 		goto err;
 
 	ret = i2c_add_adapter(&i2c->adap);
-	if (ret < 0) {
-		dev_err(&pdev->dev, "Failed to add bus\n");
+	if (ret < 0)
 		goto err;
-	}
 
 	return 0;
 
diff --git a/drivers/i2c/busses/i2c-lpc2k.c b/drivers/i2c/busses/i2c-lpc2k.c
index 586a15205e61..9b1fef455a89 100644
--- a/drivers/i2c/busses/i2c-lpc2k.c
+++ b/drivers/i2c/busses/i2c-lpc2k.c
@@ -432,10 +432,8 @@ static int i2c_lpc2k_probe(struct platform_device *pdev)
 	i2c->adap.dev.of_node = pdev->dev.of_node;
 
 	ret = i2c_add_adapter(&i2c->adap);
-	if (ret < 0) {
-		dev_err(&pdev->dev, "failed to add adapter!\n");
+	if (ret < 0)
 		goto fail_clk;
-	}
 
 	dev_info(&pdev->dev, "LPC2K I2C adapter\n");
 
diff --git a/drivers/i2c/busses/i2c-meson.c b/drivers/i2c/busses/i2c-meson.c
index 76e28980904f..2aa61bbbd307 100644
--- a/drivers/i2c/busses/i2c-meson.c
+++ b/drivers/i2c/busses/i2c-meson.c
@@ -453,7 +453,6 @@ static int meson_i2c_probe(struct platform_device *pdev)
 
 	ret = i2c_add_adapter(&i2c->adap);
 	if (ret < 0) {
-		dev_err(&pdev->dev, "can't register adapter\n");
 		clk_unprepare(i2c->clk);
 		return ret;
 	}
@@ -473,6 +472,7 @@ static int meson_i2c_remove(struct platform_device *pdev)
 
 static const struct of_device_id meson_i2c_match[] = {
 	{ .compatible = "amlogic,meson6-i2c" },
+	{ .compatible = "amlogic,meson-gxbb-i2c" },
 	{ },
 };
 MODULE_DEVICE_TABLE(of, meson_i2c_match);
diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c
index 48ecffecc0ed..565a49a0c564 100644
--- a/drivers/i2c/busses/i2c-mpc.c
+++ b/drivers/i2c/busses/i2c-mpc.c
@@ -737,10 +737,8 @@ static int fsl_i2c_probe(struct platform_device *op)
 	i2c->adap.dev.of_node = of_node_get(op->dev.of_node);
 
 	result = i2c_add_adapter(&i2c->adap);
-	if (result < 0) {
-		dev_err(i2c->dev, "failed to add adapter\n");
+	if (result < 0)
 		goto fail_add;
-	}
 
 	return result;
 
diff --git a/drivers/i2c/busses/i2c-mt65xx.c b/drivers/i2c/busses/i2c-mt65xx.c
index d9373e60be8a..4a7d9bc2142b 100644
--- a/drivers/i2c/busses/i2c-mt65xx.c
+++ b/drivers/i2c/busses/i2c-mt65xx.c
@@ -786,10 +786,8 @@ static int mtk_i2c_probe(struct platform_device *pdev)
 
 	i2c_set_adapdata(&i2c->adap, i2c);
 	ret = i2c_add_adapter(&i2c->adap);
-	if (ret) {
-		dev_err(&pdev->dev, "Failed to add i2c bus to i2c core\n");
+	if (ret)
 		return ret;
-	}
 
 	platform_set_drvdata(pdev, i2c);
 
diff --git a/drivers/i2c/busses/i2c-mxs.c b/drivers/i2c/busses/i2c-mxs.c
index 033846cdf266..5738556b6aac 100644
--- a/drivers/i2c/busses/i2c-mxs.c
+++ b/drivers/i2c/busses/i2c-mxs.c
@@ -868,7 +868,6 @@ static int mxs_i2c_probe(struct platform_device *pdev)
 	i2c_set_adapdata(adap, i2c);
 	err = i2c_add_numbered_adapter(adap);
 	if (err) {
-		dev_err(dev, "Failed to add adapter (%d)\n", err);
 		writel(MXS_I2C_CTRL0_SFTRST,
 				i2c->regs + MXS_I2C_CTRL0_SET);
 		return err;
diff --git a/drivers/i2c/busses/i2c-nforce2.c b/drivers/i2c/busses/i2c-nforce2.c
index 42fcc9458432..374b35e7e450 100644
--- a/drivers/i2c/busses/i2c-nforce2.c
+++ b/drivers/i2c/busses/i2c-nforce2.c
@@ -366,7 +366,6 @@ static int nforce2_probe_smb(struct pci_dev *dev, int bar, int alt_reg,
 
 	error = i2c_add_adapter(&smbus->adapter);
 	if (error) {
-		dev_err(&smbus->adapter.dev, "Failed to register adapter.\n");
 		release_region(smbus->base, smbus->size);
 		return error;
 	}
diff --git a/drivers/i2c/busses/i2c-nomadik.c b/drivers/i2c/busses/i2c-nomadik.c
index bcd17e8cbcb4..da6609d62848 100644
--- a/drivers/i2c/busses/i2c-nomadik.c
+++ b/drivers/i2c/busses/i2c-nomadik.c
@@ -1046,10 +1046,8 @@ static int nmk_i2c_probe(struct amba_device *adev, const struct amba_id *id)
 		 adap->name, dev->virtbase);
 
 	ret = i2c_add_adapter(adap);
-	if (ret) {
-		dev_err(&adev->dev, "failed to add adapter\n");
+	if (ret)
 		goto err_no_adap;
-	}
 
 	pm_runtime_put(&adev->dev);
 
diff --git a/drivers/i2c/busses/i2c-ocores.c b/drivers/i2c/busses/i2c-ocores.c
index ac88a524143e..34f1889a4073 100644
--- a/drivers/i2c/busses/i2c-ocores.c
+++ b/drivers/i2c/busses/i2c-ocores.c
@@ -494,10 +494,8 @@ static int ocores_i2c_probe(struct platform_device *pdev)
 
 	/* add i2c adapter to i2c tree */
 	ret = i2c_add_adapter(&i2c->adap);
-	if (ret) {
-		dev_err(&pdev->dev, "Failed to add adapter\n");
+	if (ret)
 		goto err_clk;
-	}
 
 	/* add in known devices to the bus */
 	if (pdata) {
diff --git a/drivers/i2c/busses/i2c-octeon.c b/drivers/i2c/busses/i2c-octeon-core.c
index 30ae35146723..419b54bfc7c7 100644
--- a/drivers/i2c/busses/i2c-octeon.c
+++ b/drivers/i2c/busses/i2c-octeon-core.c
@@ -4,280 +4,127 @@
  *
  * Portions Copyright (C) 2010 - 2016 Cavium, Inc.
  *
- * This is a driver for the i2c adapter in Cavium Networks' OCTEON processors.
+ * This file contains the shared part of the driver for the i2c adapter in
+ * Cavium Networks' OCTEON processors and ThunderX SOCs.
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
  * warranty of any kind, whether express or implied.
  */
 
-#include <linux/atomic.h>
-#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
 #include <linux/interrupt.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/sched.h>
-#include <linux/slab.h>
-#include <linux/i2c.h>
-#include <linux/io.h>
-#include <linux/of.h>
-
-#include <asm/octeon/octeon.h>
-
-#define DRV_NAME "i2c-octeon"
-
-/* Register offsets */
-#define SW_TWSI			0x00
-#define TWSI_INT		0x10
-#define SW_TWSI_EXT		0x18
-
-/* Controller command patterns */
-#define SW_TWSI_V		BIT_ULL(63)	/* Valid bit */
-#define SW_TWSI_EIA		BIT_ULL(61)	/* Extended internal address */
-#define SW_TWSI_R		BIT_ULL(56)	/* Result or read bit */
-#define SW_TWSI_SOVR		BIT_ULL(55)	/* Size override */
-#define SW_TWSI_SIZE_SHIFT	52
-#define SW_TWSI_ADDR_SHIFT	40
-#define SW_TWSI_IA_SHIFT	32		/* Internal address */
-
-/* Controller opcode word (bits 60:57) */
-#define SW_TWSI_OP_SHIFT	57
-#define SW_TWSI_OP_7		(0ULL << SW_TWSI_OP_SHIFT)
-#define SW_TWSI_OP_7_IA		(1ULL << SW_TWSI_OP_SHIFT)
-#define SW_TWSI_OP_10		(2ULL << SW_TWSI_OP_SHIFT)
-#define SW_TWSI_OP_10_IA	(3ULL << SW_TWSI_OP_SHIFT)
-#define SW_TWSI_OP_TWSI_CLK	(4ULL << SW_TWSI_OP_SHIFT)
-#define SW_TWSI_OP_EOP		(6ULL << SW_TWSI_OP_SHIFT) /* Extended opcode */
-
-/* Controller extended opcode word (bits 34:32) */
-#define SW_TWSI_EOP_SHIFT	32
-#define SW_TWSI_EOP_TWSI_DATA	(SW_TWSI_OP_EOP | 1ULL << SW_TWSI_EOP_SHIFT)
-#define SW_TWSI_EOP_TWSI_CTL	(SW_TWSI_OP_EOP | 2ULL << SW_TWSI_EOP_SHIFT)
-#define SW_TWSI_EOP_TWSI_CLKCTL	(SW_TWSI_OP_EOP | 3ULL << SW_TWSI_EOP_SHIFT)
-#define SW_TWSI_EOP_TWSI_STAT	(SW_TWSI_OP_EOP | 3ULL << SW_TWSI_EOP_SHIFT)
-#define SW_TWSI_EOP_TWSI_RST	(SW_TWSI_OP_EOP | 7ULL << SW_TWSI_EOP_SHIFT)
-
-/* Controller command and status bits */
-#define TWSI_CTL_CE		0x80	/* High level controller enable */
-#define TWSI_CTL_ENAB		0x40	/* Bus enable */
-#define TWSI_CTL_STA		0x20	/* Master-mode start, HW clears when done */
-#define TWSI_CTL_STP		0x10	/* Master-mode stop, HW clears when done */
-#define TWSI_CTL_IFLG		0x08	/* HW event, SW writes 0 to ACK */
-#define TWSI_CTL_AAK		0x04	/* Assert ACK */
-
-/* Status values */
-#define STAT_ERROR		0x00
-#define STAT_START		0x08
-#define STAT_REP_START		0x10
-#define STAT_TXADDR_ACK		0x18
-#define STAT_TXADDR_NAK		0x20
-#define STAT_TXDATA_ACK		0x28
-#define STAT_TXDATA_NAK		0x30
-#define STAT_LOST_ARB_38	0x38
-#define STAT_RXADDR_ACK		0x40
-#define STAT_RXADDR_NAK		0x48
-#define STAT_RXDATA_ACK		0x50
-#define STAT_RXDATA_NAK		0x58
-#define STAT_SLAVE_60		0x60
-#define STAT_LOST_ARB_68	0x68
-#define STAT_SLAVE_70		0x70
-#define STAT_LOST_ARB_78	0x78
-#define STAT_SLAVE_80		0x80
-#define STAT_SLAVE_88		0x88
-#define STAT_GENDATA_ACK	0x90
-#define STAT_GENDATA_NAK	0x98
-#define STAT_SLAVE_A0		0xA0
-#define STAT_SLAVE_A8		0xA8
-#define STAT_LOST_ARB_B0	0xB0
-#define STAT_SLAVE_LOST		0xB8
-#define STAT_SLAVE_NAK		0xC0
-#define STAT_SLAVE_ACK		0xC8
-#define STAT_AD2W_ACK		0xD0
-#define STAT_AD2W_NAK		0xD8
-#define STAT_IDLE		0xF8
-
-/* TWSI_INT values */
-#define TWSI_INT_ST_INT		BIT_ULL(0)
-#define TWSI_INT_TS_INT		BIT_ULL(1)
-#define TWSI_INT_CORE_INT	BIT_ULL(2)
-#define TWSI_INT_ST_EN		BIT_ULL(4)
-#define TWSI_INT_TS_EN		BIT_ULL(5)
-#define TWSI_INT_CORE_EN	BIT_ULL(6)
-#define TWSI_INT_SDA_OVR	BIT_ULL(8)
-#define TWSI_INT_SCL_OVR	BIT_ULL(9)
-#define TWSI_INT_SDA		BIT_ULL(10)
-#define TWSI_INT_SCL		BIT_ULL(11)
-
-#define I2C_OCTEON_EVENT_WAIT 80 /* microseconds */
-
-struct octeon_i2c {
-	wait_queue_head_t queue;
-	struct i2c_adapter adap;
-	int irq;
-	int hlc_irq;		/* For cn7890 only */
-	u32 twsi_freq;
-	int sys_freq;
-	void __iomem *twsi_base;
-	struct device *dev;
-	bool hlc_enabled;
-	bool broken_irq_mode;
-	bool broken_irq_check;
-	void (*int_enable)(struct octeon_i2c *);
-	void (*int_disable)(struct octeon_i2c *);
-	void (*hlc_int_enable)(struct octeon_i2c *);
-	void (*hlc_int_disable)(struct octeon_i2c *);
-	atomic_t int_enable_cnt;
-	atomic_t hlc_int_enable_cnt;
-};
-
-static void octeon_i2c_writeq_flush(u64 val, void __iomem *addr)
-{
-	__raw_writeq(val, addr);
-	__raw_readq(addr);	/* wait for write to land */
-}
-
-/**
- * octeon_i2c_reg_write - write an I2C core register
- * @i2c: The struct octeon_i2c
- * @eop_reg: Register selector
- * @data: Value to be written
- *
- * The I2C core registers are accessed indirectly via the SW_TWSI CSR.
- */
-static void octeon_i2c_reg_write(struct octeon_i2c *i2c, u64 eop_reg, u8 data)
-{
-	u64 tmp;
 
-	__raw_writeq(SW_TWSI_V | eop_reg | data, i2c->twsi_base + SW_TWSI);
-	do {
-		tmp = __raw_readq(i2c->twsi_base + SW_TWSI);
-	} while ((tmp & SW_TWSI_V) != 0);
-}
-
-#define octeon_i2c_ctl_write(i2c, val)					\
-	octeon_i2c_reg_write(i2c, SW_TWSI_EOP_TWSI_CTL, val)
-#define octeon_i2c_data_write(i2c, val)					\
-	octeon_i2c_reg_write(i2c, SW_TWSI_EOP_TWSI_DATA, val)
+#include "i2c-octeon-core.h"
 
-/**
- * octeon_i2c_reg_read - read lower bits of an I2C core register
- * @i2c: The struct octeon_i2c
- * @eop_reg: Register selector
- *
- * Returns the data.
- *
- * The I2C core registers are accessed indirectly via the SW_TWSI CSR.
- */
-static u8 octeon_i2c_reg_read(struct octeon_i2c *i2c, u64 eop_reg)
+/* interrupt service routine */
+irqreturn_t octeon_i2c_isr(int irq, void *dev_id)
 {
-	u64 tmp;
+	struct octeon_i2c *i2c = dev_id;
 
-	__raw_writeq(SW_TWSI_V | eop_reg | SW_TWSI_R, i2c->twsi_base + SW_TWSI);
-	do {
-		tmp = __raw_readq(i2c->twsi_base + SW_TWSI);
-	} while ((tmp & SW_TWSI_V) != 0);
+	i2c->int_disable(i2c);
+	wake_up(&i2c->queue);
 
-	return tmp & 0xFF;
+	return IRQ_HANDLED;
 }
 
-#define octeon_i2c_ctl_read(i2c)					\
-	octeon_i2c_reg_read(i2c, SW_TWSI_EOP_TWSI_CTL)
-#define octeon_i2c_data_read(i2c)					\
-	octeon_i2c_reg_read(i2c, SW_TWSI_EOP_TWSI_DATA)
-#define octeon_i2c_stat_read(i2c)					\
-	octeon_i2c_reg_read(i2c, SW_TWSI_EOP_TWSI_STAT)
-
-/**
- * octeon_i2c_read_int - read the TWSI_INT register
- * @i2c: The struct octeon_i2c
- *
- * Returns the value of the register.
- */
-static u64 octeon_i2c_read_int(struct octeon_i2c *i2c)
+static bool octeon_i2c_test_iflg(struct octeon_i2c *i2c)
 {
-	return __raw_readq(i2c->twsi_base + TWSI_INT);
+	return (octeon_i2c_ctl_read(i2c) & TWSI_CTL_IFLG);
 }
 
-/**
- * octeon_i2c_write_int - write the TWSI_INT register
- * @i2c: The struct octeon_i2c
- * @data: Value to be written
- */
-static void octeon_i2c_write_int(struct octeon_i2c *i2c, u64 data)
+static bool octeon_i2c_test_ready(struct octeon_i2c *i2c, bool *first)
 {
-	octeon_i2c_writeq_flush(data, i2c->twsi_base + TWSI_INT);
-}
+	if (octeon_i2c_test_iflg(i2c))
+		return true;
 
-/**
- * octeon_i2c_int_enable - enable the CORE interrupt
- * @i2c: The struct octeon_i2c
- *
- * The interrupt will be asserted when there is non-STAT_IDLE state in
- * the SW_TWSI_EOP_TWSI_STAT register.
- */
-static void octeon_i2c_int_enable(struct octeon_i2c *i2c)
-{
-	octeon_i2c_write_int(i2c, TWSI_INT_CORE_EN);
-}
+	if (*first) {
+		*first = false;
+		return false;
+	}
 
-/* disable the CORE interrupt */
-static void octeon_i2c_int_disable(struct octeon_i2c *i2c)
-{
-	/* clear TS/ST/IFLG events */
-	octeon_i2c_write_int(i2c, 0);
+	/*
+	 * IRQ has signaled an event but IFLG hasn't changed.
+	 * Sleep and retry once.
+	 */
+	usleep_range(I2C_OCTEON_EVENT_WAIT, 2 * I2C_OCTEON_EVENT_WAIT);
+	return octeon_i2c_test_iflg(i2c);
 }
 
 /**
- * octeon_i2c_int_enable78 - enable the CORE interrupt
+ * octeon_i2c_wait - wait for the IFLG to be set
  * @i2c: The struct octeon_i2c
  *
- * The interrupt will be asserted when there is non-STAT_IDLE state in the
- * SW_TWSI_EOP_TWSI_STAT register.
+ * Returns 0 on success, otherwise a negative errno.
  */
-static void octeon_i2c_int_enable78(struct octeon_i2c *i2c)
-{
-	atomic_inc_return(&i2c->int_enable_cnt);
-	enable_irq(i2c->irq);
-}
-
-static void __octeon_i2c_irq_disable(atomic_t *cnt, int irq)
+static int octeon_i2c_wait(struct octeon_i2c *i2c)
 {
-	int count;
+	long time_left;
+	bool first = true;
 
 	/*
-	 * The interrupt can be disabled in two places, but we only
-	 * want to make the disable_irq_nosync() call once, so keep
-	 * track with the atomic variable.
+	 * Some chip revisions don't assert the irq in the interrupt
+	 * controller. So we must poll for the IFLG change.
 	 */
-	count = atomic_dec_if_positive(cnt);
-	if (count >= 0)
-		disable_irq_nosync(irq);
+	if (i2c->broken_irq_mode) {
+		u64 end = get_jiffies_64() + i2c->adap.timeout;
+
+		while (!octeon_i2c_test_iflg(i2c) &&
+		       time_before64(get_jiffies_64(), end))
+			usleep_range(I2C_OCTEON_EVENT_WAIT / 2, I2C_OCTEON_EVENT_WAIT);
+
+		return octeon_i2c_test_iflg(i2c) ? 0 : -ETIMEDOUT;
+	}
+
+	i2c->int_enable(i2c);
+	time_left = wait_event_timeout(i2c->queue, octeon_i2c_test_ready(i2c, &first),
+				       i2c->adap.timeout);
+	i2c->int_disable(i2c);
+
+	if (i2c->broken_irq_check && !time_left &&
+	    octeon_i2c_test_iflg(i2c)) {
+		dev_err(i2c->dev, "broken irq connection detected, switching to polling mode.\n");
+		i2c->broken_irq_mode = true;
+		return 0;
+	}
+
+	if (!time_left)
+		return -ETIMEDOUT;
+
+	return 0;
 }
 
-/* disable the CORE interrupt */
-static void octeon_i2c_int_disable78(struct octeon_i2c *i2c)
+static bool octeon_i2c_hlc_test_valid(struct octeon_i2c *i2c)
 {
-	__octeon_i2c_irq_disable(&i2c->int_enable_cnt, i2c->irq);
+	return (__raw_readq(i2c->twsi_base + SW_TWSI(i2c)) & SW_TWSI_V) == 0;
 }
 
-/**
- * octeon_i2c_hlc_int_enable78 - enable the ST interrupt
- * @i2c: The struct octeon_i2c
- *
- * The interrupt will be asserted when there is non-STAT_IDLE state in
- * the SW_TWSI_EOP_TWSI_STAT register.
- */
-static void octeon_i2c_hlc_int_enable78(struct octeon_i2c *i2c)
+static bool octeon_i2c_hlc_test_ready(struct octeon_i2c *i2c, bool *first)
 {
-	atomic_inc_return(&i2c->hlc_int_enable_cnt);
-	enable_irq(i2c->hlc_irq);
+	/* check if valid bit is cleared */
+	if (octeon_i2c_hlc_test_valid(i2c))
+		return true;
+
+	if (*first) {
+		*first = false;
+		return false;
+	}
+
+	/*
+	 * IRQ has signaled an event but valid bit isn't cleared.
+	 * Sleep and retry once.
+	 */
+	usleep_range(I2C_OCTEON_EVENT_WAIT, 2 * I2C_OCTEON_EVENT_WAIT);
+	return octeon_i2c_hlc_test_valid(i2c);
 }
 
-/* disable the ST interrupt */
-static void octeon_i2c_hlc_int_disable78(struct octeon_i2c *i2c)
+static void octeon_i2c_hlc_int_clear(struct octeon_i2c *i2c)
 {
-	__octeon_i2c_irq_disable(&i2c->hlc_int_enable_cnt, i2c->hlc_irq);
+	/* clear ST/TS events, listen for neither */
+	octeon_i2c_write_int(i2c, TWSI_INT_ST_INT | TWSI_INT_TS_INT);
 }
 
 /*
@@ -321,83 +168,41 @@ static void octeon_i2c_hlc_disable(struct octeon_i2c *i2c)
 	octeon_i2c_ctl_write(i2c, TWSI_CTL_ENAB);
 }
 
-/* interrupt service routine */
-static irqreturn_t octeon_i2c_isr(int irq, void *dev_id)
-{
-	struct octeon_i2c *i2c = dev_id;
-
-	i2c->int_disable(i2c);
-	wake_up(&i2c->queue);
-
-	return IRQ_HANDLED;
-}
-
-/* HLC interrupt service routine */
-static irqreturn_t octeon_i2c_hlc_isr78(int irq, void *dev_id)
-{
-	struct octeon_i2c *i2c = dev_id;
-
-	i2c->hlc_int_disable(i2c);
-	wake_up(&i2c->queue);
-
-	return IRQ_HANDLED;
-}
-
-static bool octeon_i2c_test_iflg(struct octeon_i2c *i2c)
-{
-	return (octeon_i2c_ctl_read(i2c) & TWSI_CTL_IFLG);
-}
-
-static bool octeon_i2c_test_ready(struct octeon_i2c *i2c, bool *first)
-{
-	if (octeon_i2c_test_iflg(i2c))
-		return true;
-
-	if (*first) {
-		*first = false;
-		return false;
-	}
-
-	/*
-	 * IRQ has signaled an event but IFLG hasn't changed.
-	 * Sleep and retry once.
-	 */
-	usleep_range(I2C_OCTEON_EVENT_WAIT, 2 * I2C_OCTEON_EVENT_WAIT);
-	return octeon_i2c_test_iflg(i2c);
-}
-
 /**
- * octeon_i2c_wait - wait for the IFLG to be set
+ * octeon_i2c_hlc_wait - wait for an HLC operation to complete
  * @i2c: The struct octeon_i2c
  *
- * Returns 0 on success, otherwise a negative errno.
+ * Returns 0 on success, otherwise -ETIMEDOUT.
  */
-static int octeon_i2c_wait(struct octeon_i2c *i2c)
+static int octeon_i2c_hlc_wait(struct octeon_i2c *i2c)
 {
-	long time_left;
-	bool first = 1;
+	bool first = true;
+	int time_left;
 
 	/*
-	 * Some chip revisions don't assert the irq in the interrupt
-	 * controller. So we must poll for the IFLG change.
+	 * Some cn38xx boards don't assert the irq in the interrupt
+	 * controller. So we must poll for the valid bit change.
 	 */
 	if (i2c->broken_irq_mode) {
 		u64 end = get_jiffies_64() + i2c->adap.timeout;
 
-		while (!octeon_i2c_test_iflg(i2c) &&
+		while (!octeon_i2c_hlc_test_valid(i2c) &&
 		       time_before64(get_jiffies_64(), end))
 			usleep_range(I2C_OCTEON_EVENT_WAIT / 2, I2C_OCTEON_EVENT_WAIT);
 
-		return octeon_i2c_test_iflg(i2c) ? 0 : -ETIMEDOUT;
+		return octeon_i2c_hlc_test_valid(i2c) ? 0 : -ETIMEDOUT;
 	}
 
-	i2c->int_enable(i2c);
-	time_left = wait_event_timeout(i2c->queue, octeon_i2c_test_ready(i2c, &first),
+	i2c->hlc_int_enable(i2c);
+	time_left = wait_event_timeout(i2c->queue,
+				       octeon_i2c_hlc_test_ready(i2c, &first),
 				       i2c->adap.timeout);
-	i2c->int_disable(i2c);
+	i2c->hlc_int_disable(i2c);
+	if (!time_left)
+		octeon_i2c_hlc_int_clear(i2c);
 
 	if (i2c->broken_irq_check && !time_left &&
-	    octeon_i2c_test_iflg(i2c)) {
+	    octeon_i2c_hlc_test_valid(i2c)) {
 		dev_err(i2c->dev, "broken irq connection detected, switching to polling mode.\n");
 		i2c->broken_irq_mode = true;
 		return 0;
@@ -405,13 +210,21 @@ static int octeon_i2c_wait(struct octeon_i2c *i2c)
 
 	if (!time_left)
 		return -ETIMEDOUT;
-
 	return 0;
 }
 
 static int octeon_i2c_check_status(struct octeon_i2c *i2c, int final_read)
 {
-	u8 stat = octeon_i2c_stat_read(i2c);
+	u8 stat;
+
+	/*
+	 * This is ugly... in HLC mode the status is not in the status register
+	 * but in the lower 8 bits of SW_TWSI.
+	 */
+	if (i2c->hlc_enabled)
+		stat = __raw_readq(i2c->twsi_base + SW_TWSI(i2c));
+	else
+		stat = octeon_i2c_stat_read(i2c);
 
 	switch (stat) {
 	/* Everything is fine */
@@ -470,83 +283,157 @@ static int octeon_i2c_check_status(struct octeon_i2c *i2c, int final_read)
 	}
 }
 
-static bool octeon_i2c_hlc_test_valid(struct octeon_i2c *i2c)
+static int octeon_i2c_recovery(struct octeon_i2c *i2c)
 {
-	return (__raw_readq(i2c->twsi_base + SW_TWSI) & SW_TWSI_V) == 0;
+	int ret;
+
+	ret = i2c_recover_bus(&i2c->adap);
+	if (ret)
+		/* recover failed, try hardware re-init */
+		ret = octeon_i2c_init_lowlevel(i2c);
+	return ret;
 }
 
-static bool octeon_i2c_hlc_test_ready(struct octeon_i2c *i2c, bool *first)
+/**
+ * octeon_i2c_start - send START to the bus
+ * @i2c: The struct octeon_i2c
+ *
+ * Returns 0 on success, otherwise a negative errno.
+ */
+static int octeon_i2c_start(struct octeon_i2c *i2c)
 {
-	/* check if valid bit is cleared */
-	if (octeon_i2c_hlc_test_valid(i2c))
-		return true;
+	int ret;
+	u8 stat;
 
-	if (*first) {
-		*first = false;
-		return false;
-	}
+	octeon_i2c_hlc_disable(i2c);
 
-	/*
-	 * IRQ has signaled an event but valid bit isn't cleared.
-	 * Sleep and retry once.
-	 */
-	usleep_range(I2C_OCTEON_EVENT_WAIT, 2 * I2C_OCTEON_EVENT_WAIT);
-	return octeon_i2c_hlc_test_valid(i2c);
+	octeon_i2c_ctl_write(i2c, TWSI_CTL_ENAB | TWSI_CTL_STA);
+	ret = octeon_i2c_wait(i2c);
+	if (ret)
+		goto error;
+
+	stat = octeon_i2c_stat_read(i2c);
+	if (stat == STAT_START || stat == STAT_REP_START)
+		/* START successful, bail out */
+		return 0;
+
+error:
+	/* START failed, try to recover */
+	ret = octeon_i2c_recovery(i2c);
+	return (ret) ? ret : -EAGAIN;
 }
 
-static void octeon_i2c_hlc_int_enable(struct octeon_i2c *i2c)
+/* send STOP to the bus */
+static void octeon_i2c_stop(struct octeon_i2c *i2c)
 {
-	octeon_i2c_write_int(i2c, TWSI_INT_ST_EN);
+	octeon_i2c_ctl_write(i2c, TWSI_CTL_ENAB | TWSI_CTL_STP);
 }
 
-static void octeon_i2c_hlc_int_clear(struct octeon_i2c *i2c)
+/**
+ * octeon_i2c_read - receive data from the bus via low-level controller
+ * @i2c: The struct octeon_i2c
+ * @target: Target address
+ * @data: Pointer to the location to store the data
+ * @rlength: Length of the data
+ * @recv_len: flag for length byte
+ *
+ * The address is sent over the bus, then the data is read.
+ *
+ * Returns 0 on success, otherwise a negative errno.
+ */
+static int octeon_i2c_read(struct octeon_i2c *i2c, int target,
+			   u8 *data, u16 *rlength, bool recv_len)
 {
-	/* clear ST/TS events, listen for neither */
-	octeon_i2c_write_int(i2c, TWSI_INT_ST_INT | TWSI_INT_TS_INT);
+	int i, result, length = *rlength;
+	bool final_read = false;
+
+	octeon_i2c_data_write(i2c, (target << 1) | 1);
+	octeon_i2c_ctl_write(i2c, TWSI_CTL_ENAB);
+
+	result = octeon_i2c_wait(i2c);
+	if (result)
+		return result;
+
+	/* address OK ? */
+	result = octeon_i2c_check_status(i2c, false);
+	if (result)
+		return result;
+
+	for (i = 0; i < length; i++) {
+		/*
+		 * For the last byte to receive TWSI_CTL_AAK must not be set.
+		 *
+		 * A special case is I2C_M_RECV_LEN where we don't know the
+		 * additional length yet. If recv_len is set we assume we're
+		 * not reading the final byte and therefore need to set
+		 * TWSI_CTL_AAK.
+		 */
+		if ((i + 1 == length) && !(recv_len && i == 0))
+			final_read = true;
+
+		/* clear iflg to allow next event */
+		if (final_read)
+			octeon_i2c_ctl_write(i2c, TWSI_CTL_ENAB);
+		else
+			octeon_i2c_ctl_write(i2c, TWSI_CTL_ENAB | TWSI_CTL_AAK);
+
+		result = octeon_i2c_wait(i2c);
+		if (result)
+			return result;
+
+		data[i] = octeon_i2c_data_read(i2c, &result);
+		if (result)
+			return result;
+		if (recv_len && i == 0) {
+			if (data[i] > I2C_SMBUS_BLOCK_MAX + 1)
+				return -EPROTO;
+			length += data[i];
+		}
+
+		result = octeon_i2c_check_status(i2c, final_read);
+		if (result)
+			return result;
+	}
+	*rlength = length;
+	return 0;
 }
 
 /**
- * octeon_i2c_hlc_wait - wait for an HLC operation to complete
+ * octeon_i2c_write - send data to the bus via low-level controller
  * @i2c: The struct octeon_i2c
+ * @target: Target address
+ * @data: Pointer to the data to be sent
+ * @length: Length of the data
  *
- * Returns 0 on success, otherwise -ETIMEDOUT.
+ * The address is sent over the bus, then the data.
+ *
+ * Returns 0 on success, otherwise a negative errno.
  */
-static int octeon_i2c_hlc_wait(struct octeon_i2c *i2c)
+static int octeon_i2c_write(struct octeon_i2c *i2c, int target,
+			    const u8 *data, int length)
 {
-	bool first = 1;
-	int time_left;
+	int i, result;
 
-	/*
-	 * Some cn38xx boards don't assert the irq in the interrupt
-	 * controller. So we must poll for the valid bit change.
-	 */
-	if (i2c->broken_irq_mode) {
-		u64 end = get_jiffies_64() + i2c->adap.timeout;
+	octeon_i2c_data_write(i2c, target << 1);
+	octeon_i2c_ctl_write(i2c, TWSI_CTL_ENAB);
 
-		while (!octeon_i2c_hlc_test_valid(i2c) &&
-		       time_before64(get_jiffies_64(), end))
-			usleep_range(I2C_OCTEON_EVENT_WAIT / 2, I2C_OCTEON_EVENT_WAIT);
+	result = octeon_i2c_wait(i2c);
+	if (result)
+		return result;
 
-		return octeon_i2c_hlc_test_valid(i2c) ? 0 : -ETIMEDOUT;
-	}
+	for (i = 0; i < length; i++) {
+		result = octeon_i2c_check_status(i2c, false);
+		if (result)
+			return result;
 
-	i2c->hlc_int_enable(i2c);
-	time_left = wait_event_timeout(i2c->queue,
-				       octeon_i2c_hlc_test_ready(i2c, &first),
-				       i2c->adap.timeout);
-	i2c->hlc_int_disable(i2c);
-	if (!time_left)
-		octeon_i2c_hlc_int_clear(i2c);
+		octeon_i2c_data_write(i2c, data[i]);
+		octeon_i2c_ctl_write(i2c, TWSI_CTL_ENAB);
 
-	if (i2c->broken_irq_check && !time_left &&
-	    octeon_i2c_hlc_test_valid(i2c)) {
-		dev_err(i2c->dev, "broken irq connection detected, switching to polling mode.\n");
-		i2c->broken_irq_mode = true;
-		return 0;
+		result = octeon_i2c_wait(i2c);
+		if (result)
+			return result;
 	}
 
-	if (!time_left)
-		return -ETIMEDOUT;
 	return 0;
 }
 
@@ -570,20 +457,20 @@ static int octeon_i2c_hlc_read(struct octeon_i2c *i2c, struct i2c_msg *msgs)
 	else
 		cmd |= SW_TWSI_OP_7;
 
-	octeon_i2c_writeq_flush(cmd, i2c->twsi_base + SW_TWSI);
+	octeon_i2c_writeq_flush(cmd, i2c->twsi_base + SW_TWSI(i2c));
 	ret = octeon_i2c_hlc_wait(i2c);
 	if (ret)
 		goto err;
 
-	cmd = __raw_readq(i2c->twsi_base + SW_TWSI);
+	cmd = __raw_readq(i2c->twsi_base + SW_TWSI(i2c));
 	if ((cmd & SW_TWSI_R) == 0)
-		return -EAGAIN;
+		return octeon_i2c_check_status(i2c, false);
 
 	for (i = 0, j = msgs[0].len - 1; i  < msgs[0].len && i < 4; i++, j--)
 		msgs[0].buf[j] = (cmd >> (8 * i)) & 0xff;
 
 	if (msgs[0].len > 4) {
-		cmd = __raw_readq(i2c->twsi_base + SW_TWSI_EXT);
+		cmd = __raw_readq(i2c->twsi_base + SW_TWSI_EXT(i2c));
 		for (i = 0; i  < msgs[0].len - 4 && i < 4; i++, j--)
 			msgs[0].buf[j] = (cmd >> (8 * i)) & 0xff;
 	}
@@ -620,19 +507,17 @@ static int octeon_i2c_hlc_write(struct octeon_i2c *i2c, struct i2c_msg *msgs)
 
 		for (i = 0; i < msgs[0].len - 4 && i < 4; i++, j--)
 			ext |= (u64)msgs[0].buf[j] << (8 * i);
-		octeon_i2c_writeq_flush(ext, i2c->twsi_base + SW_TWSI_EXT);
+		octeon_i2c_writeq_flush(ext, i2c->twsi_base + SW_TWSI_EXT(i2c));
 	}
 
-	octeon_i2c_writeq_flush(cmd, i2c->twsi_base + SW_TWSI);
+	octeon_i2c_writeq_flush(cmd, i2c->twsi_base + SW_TWSI(i2c));
 	ret = octeon_i2c_hlc_wait(i2c);
 	if (ret)
 		goto err;
 
-	cmd = __raw_readq(i2c->twsi_base + SW_TWSI);
+	cmd = __raw_readq(i2c->twsi_base + SW_TWSI(i2c));
 	if ((cmd & SW_TWSI_R) == 0)
-		return -EAGAIN;
-
-	ret = octeon_i2c_check_status(i2c, false);
+		return octeon_i2c_check_status(i2c, false);
 
 err:
 	return ret;
@@ -663,27 +548,27 @@ static int octeon_i2c_hlc_comp_read(struct octeon_i2c *i2c, struct i2c_msg *msgs
 		cmd |= SW_TWSI_EIA;
 		ext = (u64)msgs[0].buf[0] << SW_TWSI_IA_SHIFT;
 		cmd |= (u64)msgs[0].buf[1] << SW_TWSI_IA_SHIFT;
-		octeon_i2c_writeq_flush(ext, i2c->twsi_base + SW_TWSI_EXT);
+		octeon_i2c_writeq_flush(ext, i2c->twsi_base + SW_TWSI_EXT(i2c));
 	} else {
 		cmd |= (u64)msgs[0].buf[0] << SW_TWSI_IA_SHIFT;
 	}
 
 	octeon_i2c_hlc_int_clear(i2c);
-	octeon_i2c_writeq_flush(cmd, i2c->twsi_base + SW_TWSI);
+	octeon_i2c_writeq_flush(cmd, i2c->twsi_base + SW_TWSI(i2c));
 
 	ret = octeon_i2c_hlc_wait(i2c);
 	if (ret)
 		goto err;
 
-	cmd = __raw_readq(i2c->twsi_base + SW_TWSI);
+	cmd = __raw_readq(i2c->twsi_base + SW_TWSI(i2c));
 	if ((cmd & SW_TWSI_R) == 0)
-		return -EAGAIN;
+		return octeon_i2c_check_status(i2c, false);
 
 	for (i = 0, j = msgs[1].len - 1; i  < msgs[1].len && i < 4; i++, j--)
 		msgs[1].buf[j] = (cmd >> (8 * i)) & 0xff;
 
 	if (msgs[1].len > 4) {
-		cmd = __raw_readq(i2c->twsi_base + SW_TWSI_EXT);
+		cmd = __raw_readq(i2c->twsi_base + SW_TWSI_EXT(i2c));
 		for (i = 0; i  < msgs[1].len - 4 && i < 4; i++, j--)
 			msgs[1].buf[j] = (cmd >> (8 * i)) & 0xff;
 	}
@@ -730,27 +615,85 @@ static int octeon_i2c_hlc_comp_write(struct octeon_i2c *i2c, struct i2c_msg *msg
 		set_ext = true;
 	}
 	if (set_ext)
-		octeon_i2c_writeq_flush(ext, i2c->twsi_base + SW_TWSI_EXT);
+		octeon_i2c_writeq_flush(ext, i2c->twsi_base + SW_TWSI_EXT(i2c));
 
 	octeon_i2c_hlc_int_clear(i2c);
-	octeon_i2c_writeq_flush(cmd, i2c->twsi_base + SW_TWSI);
+	octeon_i2c_writeq_flush(cmd, i2c->twsi_base + SW_TWSI(i2c));
 
 	ret = octeon_i2c_hlc_wait(i2c);
 	if (ret)
 		goto err;
 
-	cmd = __raw_readq(i2c->twsi_base + SW_TWSI);
+	cmd = __raw_readq(i2c->twsi_base + SW_TWSI(i2c));
 	if ((cmd & SW_TWSI_R) == 0)
-		return -EAGAIN;
-
-	ret = octeon_i2c_check_status(i2c, false);
+		return octeon_i2c_check_status(i2c, false);
 
 err:
 	return ret;
 }
 
+/**
+ * octeon_i2c_xfer - The driver's master_xfer function
+ * @adap: Pointer to the i2c_adapter structure
+ * @msgs: Pointer to the messages to be processed
+ * @num: Length of the MSGS array
+ *
+ * Returns the number of messages processed, or a negative errno on failure.
+ */
+int octeon_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
+{
+	struct octeon_i2c *i2c = i2c_get_adapdata(adap);
+	int i, ret = 0;
+
+	if (num == 1) {
+		if (msgs[0].len > 0 && msgs[0].len <= 8) {
+			if (msgs[0].flags & I2C_M_RD)
+				ret = octeon_i2c_hlc_read(i2c, msgs);
+			else
+				ret = octeon_i2c_hlc_write(i2c, msgs);
+			goto out;
+		}
+	} else if (num == 2) {
+		if ((msgs[0].flags & I2C_M_RD) == 0 &&
+		    (msgs[1].flags & I2C_M_RECV_LEN) == 0 &&
+		    msgs[0].len > 0 && msgs[0].len <= 2 &&
+		    msgs[1].len > 0 && msgs[1].len <= 8 &&
+		    msgs[0].addr == msgs[1].addr) {
+			if (msgs[1].flags & I2C_M_RD)
+				ret = octeon_i2c_hlc_comp_read(i2c, msgs);
+			else
+				ret = octeon_i2c_hlc_comp_write(i2c, msgs);
+			goto out;
+		}
+	}
+
+	for (i = 0; ret == 0 && i < num; i++) {
+		struct i2c_msg *pmsg = &msgs[i];
+
+		/* zero-length messages are not supported */
+		if (!pmsg->len) {
+			ret = -EOPNOTSUPP;
+			break;
+		}
+
+		ret = octeon_i2c_start(i2c);
+		if (ret)
+			return ret;
+
+		if (pmsg->flags & I2C_M_RD)
+			ret = octeon_i2c_read(i2c, pmsg->addr, pmsg->buf,
+					      &pmsg->len, pmsg->flags & I2C_M_RECV_LEN);
+		else
+			ret = octeon_i2c_write(i2c, pmsg->addr, pmsg->buf,
+					       pmsg->len);
+	}
+	octeon_i2c_stop(i2c);
+out:
+	return (ret != 0) ? ret : num;
+}
+
 /* calculate and set clock divisors */
-static void octeon_i2c_set_clock(struct octeon_i2c *i2c)
+void octeon_i2c_set_clock(struct octeon_i2c *i2c)
 {
 	int tclk, thp_base, inc, thp_idx, mdiv_idx, ndiv_idx, foscl, diff;
 	int thp = 0x18, mdiv = 2, ndiv = 0, delta_hz = 1000000;
@@ -791,7 +734,7 @@ static void octeon_i2c_set_clock(struct octeon_i2c *i2c)
 	octeon_i2c_reg_write(i2c, SW_TWSI_EOP_TWSI_CLKCTL, (mdiv << 3) | ndiv);
 }
 
-static int octeon_i2c_init_lowlevel(struct octeon_i2c *i2c)
+int octeon_i2c_init_lowlevel(struct octeon_i2c *i2c)
 {
 	u8 status = 0;
 	int tries;
@@ -818,219 +761,6 @@ static int octeon_i2c_init_lowlevel(struct octeon_i2c *i2c)
 	return 0;
 }
 
-static int octeon_i2c_recovery(struct octeon_i2c *i2c)
-{
-	int ret;
-
-	ret = i2c_recover_bus(&i2c->adap);
-	if (ret)
-		/* recover failed, try hardware re-init */
-		ret = octeon_i2c_init_lowlevel(i2c);
-	return ret;
-}
-
-/**
- * octeon_i2c_start - send START to the bus
- * @i2c: The struct octeon_i2c
- *
- * Returns 0 on success, otherwise a negative errno.
- */
-static int octeon_i2c_start(struct octeon_i2c *i2c)
-{
-	int ret;
-	u8 stat;
-
-	octeon_i2c_hlc_disable(i2c);
-
-	octeon_i2c_ctl_write(i2c, TWSI_CTL_ENAB | TWSI_CTL_STA);
-	ret = octeon_i2c_wait(i2c);
-	if (ret)
-		goto error;
-
-	stat = octeon_i2c_stat_read(i2c);
-	if (stat == STAT_START || stat == STAT_REP_START)
-		/* START successful, bail out */
-		return 0;
-
-error:
-	/* START failed, try to recover */
-	ret = octeon_i2c_recovery(i2c);
-	return (ret) ? ret : -EAGAIN;
-}
-
-/* send STOP to the bus */
-static void octeon_i2c_stop(struct octeon_i2c *i2c)
-{
-	octeon_i2c_ctl_write(i2c, TWSI_CTL_ENAB | TWSI_CTL_STP);
-}
-
-/**
- * octeon_i2c_write - send data to the bus via low-level controller
- * @i2c: The struct octeon_i2c
- * @target: Target address
- * @data: Pointer to the data to be sent
- * @length: Length of the data
- *
- * The address is sent over the bus, then the data.
- *
- * Returns 0 on success, otherwise a negative errno.
- */
-static int octeon_i2c_write(struct octeon_i2c *i2c, int target,
-			    const u8 *data, int length)
-{
-	int i, result;
-
-	octeon_i2c_data_write(i2c, target << 1);
-	octeon_i2c_ctl_write(i2c, TWSI_CTL_ENAB);
-
-	result = octeon_i2c_wait(i2c);
-	if (result)
-		return result;
-
-	for (i = 0; i < length; i++) {
-		result = octeon_i2c_check_status(i2c, false);
-		if (result)
-			return result;
-
-		octeon_i2c_data_write(i2c, data[i]);
-		octeon_i2c_ctl_write(i2c, TWSI_CTL_ENAB);
-
-		result = octeon_i2c_wait(i2c);
-		if (result)
-			return result;
-	}
-
-	return 0;
-}
-
-/**
- * octeon_i2c_read - receive data from the bus via low-level controller
- * @i2c: The struct octeon_i2c
- * @target: Target address
- * @data: Pointer to the location to store the data
- * @rlength: Length of the data
- * @recv_len: flag for length byte
- *
- * The address is sent over the bus, then the data is read.
- *
- * Returns 0 on success, otherwise a negative errno.
- */
-static int octeon_i2c_read(struct octeon_i2c *i2c, int target,
-			   u8 *data, u16 *rlength, bool recv_len)
-{
-	int i, result, length = *rlength;
-	bool final_read = false;
-
-	octeon_i2c_data_write(i2c, (target << 1) | 1);
-	octeon_i2c_ctl_write(i2c, TWSI_CTL_ENAB);
-
-	result = octeon_i2c_wait(i2c);
-	if (result)
-		return result;
-
-	/* address OK ? */
-	result = octeon_i2c_check_status(i2c, false);
-	if (result)
-		return result;
-
-	for (i = 0; i < length; i++) {
-		/*
-		 * For the last byte to receive TWSI_CTL_AAK must not be set.
-		 *
-		 * A special case is I2C_M_RECV_LEN where we don't know the
-		 * additional length yet. If recv_len is set we assume we're
-		 * not reading the final byte and therefore need to set
-		 * TWSI_CTL_AAK.
-		 */
-		if ((i + 1 == length) && !(recv_len && i == 0))
-			final_read = true;
-
-		/* clear iflg to allow next event */
-		if (final_read)
-			octeon_i2c_ctl_write(i2c, TWSI_CTL_ENAB);
-		else
-			octeon_i2c_ctl_write(i2c, TWSI_CTL_ENAB | TWSI_CTL_AAK);
-
-		result = octeon_i2c_wait(i2c);
-		if (result)
-			return result;
-
-		data[i] = octeon_i2c_data_read(i2c);
-		if (recv_len && i == 0) {
-			if (data[i] > I2C_SMBUS_BLOCK_MAX + 1)
-				return -EPROTO;
-			length += data[i];
-		}
-
-		result = octeon_i2c_check_status(i2c, final_read);
-		if (result)
-			return result;
-	}
-	*rlength = length;
-	return 0;
-}
-
-/**
- * octeon_i2c_xfer - The driver's master_xfer function
- * @adap: Pointer to the i2c_adapter structure
- * @msgs: Pointer to the messages to be processed
- * @num: Length of the MSGS array
- *
- * Returns the number of messages processed, or a negative errno on failure.
- */
-static int octeon_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
-			   int num)
-{
-	struct octeon_i2c *i2c = i2c_get_adapdata(adap);
-	int i, ret = 0;
-
-	if (num == 1) {
-		if (msgs[0].len > 0 && msgs[0].len <= 8) {
-			if (msgs[0].flags & I2C_M_RD)
-				ret = octeon_i2c_hlc_read(i2c, msgs);
-			else
-				ret = octeon_i2c_hlc_write(i2c, msgs);
-			goto out;
-		}
-	} else if (num == 2) {
-		if ((msgs[0].flags & I2C_M_RD) == 0 &&
-		    (msgs[1].flags & I2C_M_RECV_LEN) == 0 &&
-		    msgs[0].len > 0 && msgs[0].len <= 2 &&
-		    msgs[1].len > 0 && msgs[1].len <= 8 &&
-		    msgs[0].addr == msgs[1].addr) {
-			if (msgs[1].flags & I2C_M_RD)
-				ret = octeon_i2c_hlc_comp_read(i2c, msgs);
-			else
-				ret = octeon_i2c_hlc_comp_write(i2c, msgs);
-			goto out;
-		}
-	}
-
-	for (i = 0; ret == 0 && i < num; i++) {
-		struct i2c_msg *pmsg = &msgs[i];
-
-		/* zero-length messages are not supported */
-		if (!pmsg->len) {
-			ret = -EOPNOTSUPP;
-			break;
-		}
-
-		ret = octeon_i2c_start(i2c);
-		if (ret)
-			return ret;
-
-		if (pmsg->flags & I2C_M_RD)
-			ret = octeon_i2c_read(i2c, pmsg->addr, pmsg->buf,
-					      &pmsg->len, pmsg->flags & I2C_M_RECV_LEN);
-		else
-			ret = octeon_i2c_write(i2c, pmsg->addr, pmsg->buf,
-					       pmsg->len);
-	}
-	octeon_i2c_stop(i2c);
-out:
-	return (ret != 0) ? ret : num;
-}
-
 static int octeon_i2c_get_scl(struct i2c_adapter *adap)
 {
 	struct octeon_i2c *i2c = i2c_get_adapdata(adap);
@@ -1044,7 +774,7 @@ static void octeon_i2c_set_scl(struct i2c_adapter *adap, int val)
 {
 	struct octeon_i2c *i2c = i2c_get_adapdata(adap);
 
-	octeon_i2c_write_int(i2c, TWSI_INT_SCL_OVR);
+	octeon_i2c_write_int(i2c, val ? 0 : TWSI_INT_SCL_OVR);
 }
 
 static int octeon_i2c_get_sda(struct i2c_adapter *adap)
@@ -1060,13 +790,14 @@ static void octeon_i2c_prepare_recovery(struct i2c_adapter *adap)
 {
 	struct octeon_i2c *i2c = i2c_get_adapdata(adap);
 
+	octeon_i2c_hlc_disable(i2c);
+
 	/*
-	 * The stop resets the state machine, does not _transmit_ STOP unless
-	 * engine was active.
+	 * Bring control register to a good state regardless
+	 * of HLC state.
 	 */
-	octeon_i2c_stop(i2c);
+	octeon_i2c_ctl_write(i2c, TWSI_CTL_ENAB);
 
-	octeon_i2c_hlc_disable(i2c);
 	octeon_i2c_write_int(i2c, 0);
 }
 
@@ -1074,10 +805,19 @@ static void octeon_i2c_unprepare_recovery(struct i2c_adapter *adap)
 {
 	struct octeon_i2c *i2c = i2c_get_adapdata(adap);
 
+	/*
+	 * Generate STOP to finish the unfinished transaction.
+	 * Can't generate STOP via the TWSI CTL register
+	 * since it could bring the TWSI controller into an inoperable state.
+	 */
+	octeon_i2c_write_int(i2c, TWSI_INT_SDA_OVR | TWSI_INT_SCL_OVR);
+	udelay(5);
+	octeon_i2c_write_int(i2c, TWSI_INT_SDA_OVR);
+	udelay(5);
 	octeon_i2c_write_int(i2c, 0);
 }
 
-static struct i2c_bus_recovery_info octeon_i2c_recovery_info = {
+struct i2c_bus_recovery_info octeon_i2c_recovery_info = {
 	.recover_bus = i2c_generic_scl_recovery,
 	.get_scl = octeon_i2c_get_scl,
 	.set_scl = octeon_i2c_set_scl,
@@ -1085,171 +825,3 @@ static struct i2c_bus_recovery_info octeon_i2c_recovery_info = {
 	.prepare_recovery = octeon_i2c_prepare_recovery,
 	.unprepare_recovery = octeon_i2c_unprepare_recovery,
 };
-
-static u32 octeon_i2c_functionality(struct i2c_adapter *adap)
-{
-	return I2C_FUNC_I2C | (I2C_FUNC_SMBUS_EMUL & ~I2C_FUNC_SMBUS_QUICK) |
-	       I2C_FUNC_SMBUS_READ_BLOCK_DATA | I2C_SMBUS_BLOCK_PROC_CALL;
-}
-
-static const struct i2c_algorithm octeon_i2c_algo = {
-	.master_xfer = octeon_i2c_xfer,
-	.functionality = octeon_i2c_functionality,
-};
-
-static struct i2c_adapter octeon_i2c_ops = {
-	.owner = THIS_MODULE,
-	.name = "OCTEON adapter",
-	.algo = &octeon_i2c_algo,
-};
-
-static int octeon_i2c_probe(struct platform_device *pdev)
-{
-	struct device_node *node = pdev->dev.of_node;
-	int irq, result = 0, hlc_irq = 0;
-	struct resource *res_mem;
-	struct octeon_i2c *i2c;
-	bool cn78xx_style;
-
-	cn78xx_style = of_device_is_compatible(node, "cavium,octeon-7890-twsi");
-	if (cn78xx_style) {
-		hlc_irq = platform_get_irq(pdev, 0);
-		if (hlc_irq < 0)
-			return hlc_irq;
-
-		irq = platform_get_irq(pdev, 2);
-		if (irq < 0)
-			return irq;
-	} else {
-		/* All adaptors have an irq.  */
-		irq = platform_get_irq(pdev, 0);
-		if (irq < 0)
-			return irq;
-	}
-
-	i2c = devm_kzalloc(&pdev->dev, sizeof(*i2c), GFP_KERNEL);
-	if (!i2c) {
-		result = -ENOMEM;
-		goto out;
-	}
-	i2c->dev = &pdev->dev;
-
-	res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	i2c->twsi_base = devm_ioremap_resource(&pdev->dev, res_mem);
-	if (IS_ERR(i2c->twsi_base)) {
-		result = PTR_ERR(i2c->twsi_base);
-		goto out;
-	}
-
-	/*
-	 * "clock-rate" is a legacy binding, the official binding is
-	 * "clock-frequency".  Try the official one first and then
-	 * fall back if it doesn't exist.
-	 */
-	if (of_property_read_u32(node, "clock-frequency", &i2c->twsi_freq) &&
-	    of_property_read_u32(node, "clock-rate", &i2c->twsi_freq)) {
-		dev_err(i2c->dev,
-			"no I2C 'clock-rate' or 'clock-frequency' property\n");
-		result = -ENXIO;
-		goto out;
-	}
-
-	i2c->sys_freq = octeon_get_io_clock_rate();
-
-	init_waitqueue_head(&i2c->queue);
-
-	i2c->irq = irq;
-
-	if (cn78xx_style) {
-		i2c->hlc_irq = hlc_irq;
-
-		i2c->int_enable = octeon_i2c_int_enable78;
-		i2c->int_disable = octeon_i2c_int_disable78;
-		i2c->hlc_int_enable = octeon_i2c_hlc_int_enable78;
-		i2c->hlc_int_disable = octeon_i2c_hlc_int_disable78;
-
-		irq_set_status_flags(i2c->irq, IRQ_NOAUTOEN);
-		irq_set_status_flags(i2c->hlc_irq, IRQ_NOAUTOEN);
-
-		result = devm_request_irq(&pdev->dev, i2c->hlc_irq,
-					  octeon_i2c_hlc_isr78, 0,
-					  DRV_NAME, i2c);
-		if (result < 0) {
-			dev_err(i2c->dev, "failed to attach interrupt\n");
-			goto out;
-		}
-	} else {
-		i2c->int_enable = octeon_i2c_int_enable;
-		i2c->int_disable = octeon_i2c_int_disable;
-		i2c->hlc_int_enable = octeon_i2c_hlc_int_enable;
-		i2c->hlc_int_disable = octeon_i2c_int_disable;
-	}
-
-	result = devm_request_irq(&pdev->dev, i2c->irq,
-				  octeon_i2c_isr, 0, DRV_NAME, i2c);
-	if (result < 0) {
-		dev_err(i2c->dev, "failed to attach interrupt\n");
-		goto out;
-	}
-
-	if (OCTEON_IS_MODEL(OCTEON_CN38XX))
-		i2c->broken_irq_check = true;
-
-	result = octeon_i2c_init_lowlevel(i2c);
-	if (result) {
-		dev_err(i2c->dev, "init low level failed\n");
-		goto  out;
-	}
-
-	octeon_i2c_set_clock(i2c);
-
-	i2c->adap = octeon_i2c_ops;
-	i2c->adap.timeout = msecs_to_jiffies(2);
-	i2c->adap.retries = 5;
-	i2c->adap.bus_recovery_info = &octeon_i2c_recovery_info;
-	i2c->adap.dev.parent = &pdev->dev;
-	i2c->adap.dev.of_node = node;
-	i2c_set_adapdata(&i2c->adap, i2c);
-	platform_set_drvdata(pdev, i2c);
-
-	result = i2c_add_adapter(&i2c->adap);
-	if (result < 0) {
-		dev_err(i2c->dev, "failed to add adapter\n");
-		goto out;
-	}
-	dev_info(i2c->dev, "probed\n");
-	return 0;
-
-out:
-	return result;
-};
-
-static int octeon_i2c_remove(struct platform_device *pdev)
-{
-	struct octeon_i2c *i2c = platform_get_drvdata(pdev);
-
-	i2c_del_adapter(&i2c->adap);
-	return 0;
-};
-
-static const struct of_device_id octeon_i2c_match[] = {
-	{ .compatible = "cavium,octeon-3860-twsi", },
-	{ .compatible = "cavium,octeon-7890-twsi", },
-	{},
-};
-MODULE_DEVICE_TABLE(of, octeon_i2c_match);
-
-static struct platform_driver octeon_i2c_driver = {
-	.probe		= octeon_i2c_probe,
-	.remove		= octeon_i2c_remove,
-	.driver		= {
-		.name	= DRV_NAME,
-		.of_match_table = octeon_i2c_match,
-	},
-};
-
-module_platform_driver(octeon_i2c_driver);
-
-MODULE_AUTHOR("Michael Lawnick <michael.lawnick.ext@nsn.com>");
-MODULE_DESCRIPTION("I2C-Bus adapter for Cavium OCTEON processors");
-MODULE_LICENSE("GPL");
diff --git a/drivers/i2c/busses/i2c-octeon-core.h b/drivers/i2c/busses/i2c-octeon-core.h
new file mode 100644
index 000000000000..1db7c835a454
--- /dev/null
+++ b/drivers/i2c/busses/i2c-octeon-core.h
@@ -0,0 +1,216 @@
+#include <linux/atomic.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/i2c.h>
+#include <linux/i2c-smbus.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+
+/* Controller command patterns */
+#define SW_TWSI_V		BIT_ULL(63)	/* Valid bit */
+#define SW_TWSI_EIA		BIT_ULL(61)	/* Extended internal address */
+#define SW_TWSI_R		BIT_ULL(56)	/* Result or read bit */
+#define SW_TWSI_SOVR		BIT_ULL(55)	/* Size override */
+#define SW_TWSI_SIZE_SHIFT	52
+#define SW_TWSI_ADDR_SHIFT	40
+#define SW_TWSI_IA_SHIFT	32		/* Internal address */
+
+/* Controller opcode word (bits 60:57) */
+#define SW_TWSI_OP_SHIFT	57
+#define SW_TWSI_OP_7		(0ULL << SW_TWSI_OP_SHIFT)
+#define SW_TWSI_OP_7_IA		(1ULL << SW_TWSI_OP_SHIFT)
+#define SW_TWSI_OP_10		(2ULL << SW_TWSI_OP_SHIFT)
+#define SW_TWSI_OP_10_IA	(3ULL << SW_TWSI_OP_SHIFT)
+#define SW_TWSI_OP_TWSI_CLK	(4ULL << SW_TWSI_OP_SHIFT)
+#define SW_TWSI_OP_EOP		(6ULL << SW_TWSI_OP_SHIFT) /* Extended opcode */
+
+/* Controller extended opcode word (bits 34:32) */
+#define SW_TWSI_EOP_SHIFT	32
+#define SW_TWSI_EOP_TWSI_DATA	(SW_TWSI_OP_EOP | 1ULL << SW_TWSI_EOP_SHIFT)
+#define SW_TWSI_EOP_TWSI_CTL	(SW_TWSI_OP_EOP | 2ULL << SW_TWSI_EOP_SHIFT)
+#define SW_TWSI_EOP_TWSI_CLKCTL	(SW_TWSI_OP_EOP | 3ULL << SW_TWSI_EOP_SHIFT)
+#define SW_TWSI_EOP_TWSI_STAT	(SW_TWSI_OP_EOP | 3ULL << SW_TWSI_EOP_SHIFT)
+#define SW_TWSI_EOP_TWSI_RST	(SW_TWSI_OP_EOP | 7ULL << SW_TWSI_EOP_SHIFT)
+
+/* Controller command and status bits */
+#define TWSI_CTL_CE		0x80	/* High level controller enable */
+#define TWSI_CTL_ENAB		0x40	/* Bus enable */
+#define TWSI_CTL_STA		0x20	/* Master-mode start, HW clears when done */
+#define TWSI_CTL_STP		0x10	/* Master-mode stop, HW clears when done */
+#define TWSI_CTL_IFLG		0x08	/* HW event, SW writes 0 to ACK */
+#define TWSI_CTL_AAK		0x04	/* Assert ACK */
+
+/* Status values */
+#define STAT_ERROR		0x00
+#define STAT_START		0x08
+#define STAT_REP_START		0x10
+#define STAT_TXADDR_ACK		0x18
+#define STAT_TXADDR_NAK		0x20
+#define STAT_TXDATA_ACK		0x28
+#define STAT_TXDATA_NAK		0x30
+#define STAT_LOST_ARB_38	0x38
+#define STAT_RXADDR_ACK		0x40
+#define STAT_RXADDR_NAK		0x48
+#define STAT_RXDATA_ACK		0x50
+#define STAT_RXDATA_NAK		0x58
+#define STAT_SLAVE_60		0x60
+#define STAT_LOST_ARB_68	0x68
+#define STAT_SLAVE_70		0x70
+#define STAT_LOST_ARB_78	0x78
+#define STAT_SLAVE_80		0x80
+#define STAT_SLAVE_88		0x88
+#define STAT_GENDATA_ACK	0x90
+#define STAT_GENDATA_NAK	0x98
+#define STAT_SLAVE_A0		0xA0
+#define STAT_SLAVE_A8		0xA8
+#define STAT_LOST_ARB_B0	0xB0
+#define STAT_SLAVE_LOST		0xB8
+#define STAT_SLAVE_NAK		0xC0
+#define STAT_SLAVE_ACK		0xC8
+#define STAT_AD2W_ACK		0xD0
+#define STAT_AD2W_NAK		0xD8
+#define STAT_IDLE		0xF8
+
+/* TWSI_INT values */
+#define TWSI_INT_ST_INT		BIT_ULL(0)
+#define TWSI_INT_TS_INT		BIT_ULL(1)
+#define TWSI_INT_CORE_INT	BIT_ULL(2)
+#define TWSI_INT_ST_EN		BIT_ULL(4)
+#define TWSI_INT_TS_EN		BIT_ULL(5)
+#define TWSI_INT_CORE_EN	BIT_ULL(6)
+#define TWSI_INT_SDA_OVR	BIT_ULL(8)
+#define TWSI_INT_SCL_OVR	BIT_ULL(9)
+#define TWSI_INT_SDA		BIT_ULL(10)
+#define TWSI_INT_SCL		BIT_ULL(11)
+
+#define I2C_OCTEON_EVENT_WAIT 80 /* microseconds */
+
+/* Register offsets */
+struct octeon_i2c_reg_offset {
+	unsigned int sw_twsi;
+	unsigned int twsi_int;
+	unsigned int sw_twsi_ext;
+};
+
+#define SW_TWSI(x)	(x->roff.sw_twsi)
+#define TWSI_INT(x)	(x->roff.twsi_int)
+#define SW_TWSI_EXT(x)	(x->roff.sw_twsi_ext)
+
+struct octeon_i2c {
+	wait_queue_head_t queue;
+	struct i2c_adapter adap;
+	struct octeon_i2c_reg_offset roff;
+	struct clk *clk;
+	int irq;
+	int hlc_irq;		/* For cn7890 only */
+	u32 twsi_freq;
+	int sys_freq;
+	void __iomem *twsi_base;
+	struct device *dev;
+	bool hlc_enabled;
+	bool broken_irq_mode;
+	bool broken_irq_check;
+	void (*int_enable)(struct octeon_i2c *);
+	void (*int_disable)(struct octeon_i2c *);
+	void (*hlc_int_enable)(struct octeon_i2c *);
+	void (*hlc_int_disable)(struct octeon_i2c *);
+	atomic_t int_enable_cnt;
+	atomic_t hlc_int_enable_cnt;
+#if IS_ENABLED(CONFIG_I2C_THUNDERX)
+	struct msix_entry i2c_msix;
+#endif
+	struct i2c_smbus_alert_setup alert_data;
+	struct i2c_client *ara;
+};
+
+static inline void octeon_i2c_writeq_flush(u64 val, void __iomem *addr)
+{
+	__raw_writeq(val, addr);
+	__raw_readq(addr);	/* wait for write to land */
+}
+
+/**
+ * octeon_i2c_reg_write - write an I2C core register
+ * @i2c: The struct octeon_i2c
+ * @eop_reg: Register selector
+ * @data: Value to be written
+ *
+ * The I2C core registers are accessed indirectly via the SW_TWSI CSR.
+ */
+static inline void octeon_i2c_reg_write(struct octeon_i2c *i2c, u64 eop_reg, u8 data)
+{
+	u64 tmp;
+
+	__raw_writeq(SW_TWSI_V | eop_reg | data, i2c->twsi_base + SW_TWSI(i2c));
+
+	readq_poll_timeout(i2c->twsi_base + SW_TWSI(i2c), tmp, tmp & SW_TWSI_V,
+			   I2C_OCTEON_EVENT_WAIT, i2c->adap.timeout);
+}
+
+#define octeon_i2c_ctl_write(i2c, val)					\
+	octeon_i2c_reg_write(i2c, SW_TWSI_EOP_TWSI_CTL, val)
+#define octeon_i2c_data_write(i2c, val)					\
+	octeon_i2c_reg_write(i2c, SW_TWSI_EOP_TWSI_DATA, val)
+
+/**
+ * octeon_i2c_reg_read - read lower bits of an I2C core register
+ * @i2c: The struct octeon_i2c
+ * @eop_reg: Register selector
+ *
+ * Returns the data.
+ *
+ * The I2C core registers are accessed indirectly via the SW_TWSI CSR.
+ */
+static inline int octeon_i2c_reg_read(struct octeon_i2c *i2c, u64 eop_reg,
+				      int *error)
+{
+	u64 tmp;
+	int ret;
+
+	__raw_writeq(SW_TWSI_V | eop_reg | SW_TWSI_R, i2c->twsi_base + SW_TWSI(i2c));
+
+	ret = readq_poll_timeout(i2c->twsi_base + SW_TWSI(i2c), tmp,
+				 tmp & SW_TWSI_V, I2C_OCTEON_EVENT_WAIT,
+				 i2c->adap.timeout);
+	if (error)
+		*error = ret;
+	return tmp & 0xFF;
+}
+
+#define octeon_i2c_ctl_read(i2c)					\
+	octeon_i2c_reg_read(i2c, SW_TWSI_EOP_TWSI_CTL, NULL)
+#define octeon_i2c_data_read(i2c, error)				\
+	octeon_i2c_reg_read(i2c, SW_TWSI_EOP_TWSI_DATA, error)
+#define octeon_i2c_stat_read(i2c)					\
+	octeon_i2c_reg_read(i2c, SW_TWSI_EOP_TWSI_STAT, NULL)
+
+/**
+ * octeon_i2c_read_int - read the TWSI_INT register
+ * @i2c: The struct octeon_i2c
+ *
+ * Returns the value of the register.
+ */
+static inline u64 octeon_i2c_read_int(struct octeon_i2c *i2c)
+{
+	return __raw_readq(i2c->twsi_base + TWSI_INT(i2c));
+}
+
+/**
+ * octeon_i2c_write_int - write the TWSI_INT register
+ * @i2c: The struct octeon_i2c
+ * @data: Value to be written
+ */
+static inline void octeon_i2c_write_int(struct octeon_i2c *i2c, u64 data)
+{
+	octeon_i2c_writeq_flush(data, i2c->twsi_base + TWSI_INT(i2c));
+}
+
+/* Prototypes */
+irqreturn_t octeon_i2c_isr(int irq, void *dev_id);
+int octeon_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num);
+int octeon_i2c_init_lowlevel(struct octeon_i2c *i2c);
+void octeon_i2c_set_clock(struct octeon_i2c *i2c);
+extern struct i2c_bus_recovery_info octeon_i2c_recovery_info;
diff --git a/drivers/i2c/busses/i2c-octeon-platdrv.c b/drivers/i2c/busses/i2c-octeon-platdrv.c
new file mode 100644
index 000000000000..917524ce6890
--- /dev/null
+++ b/drivers/i2c/busses/i2c-octeon-platdrv.c
@@ -0,0 +1,286 @@
+/*
+ * (C) Copyright 2009-2010
+ * Nokia Siemens Networks, michael.lawnick.ext@nsn.com
+ *
+ * Portions Copyright (C) 2010 - 2016 Cavium, Inc.
+ *
+ * This is a driver for the i2c adapter in Cavium Networks' OCTEON processors.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/atomic.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+
+#include <asm/octeon/octeon.h>
+#include "i2c-octeon-core.h"
+
+#define DRV_NAME "i2c-octeon"
+
+/**
+ * octeon_i2c_int_enable - enable the CORE interrupt
+ * @i2c: The struct octeon_i2c
+ *
+ * The interrupt will be asserted when there is non-STAT_IDLE state in
+ * the SW_TWSI_EOP_TWSI_STAT register.
+ */
+static void octeon_i2c_int_enable(struct octeon_i2c *i2c)
+{
+	octeon_i2c_write_int(i2c, TWSI_INT_CORE_EN);
+}
+
+/* disable the CORE interrupt */
+static void octeon_i2c_int_disable(struct octeon_i2c *i2c)
+{
+	/* clear TS/ST/IFLG events */
+	octeon_i2c_write_int(i2c, 0);
+}
+
+/**
+ * octeon_i2c_int_enable78 - enable the CORE interrupt
+ * @i2c: The struct octeon_i2c
+ *
+ * The interrupt will be asserted when there is non-STAT_IDLE state in the
+ * SW_TWSI_EOP_TWSI_STAT register.
+ */
+static void octeon_i2c_int_enable78(struct octeon_i2c *i2c)
+{
+	atomic_inc_return(&i2c->int_enable_cnt);
+	enable_irq(i2c->irq);
+}
+
+static void __octeon_i2c_irq_disable(atomic_t *cnt, int irq)
+{
+	int count;
+
+	/*
+	 * The interrupt can be disabled in two places, but we only
+	 * want to make the disable_irq_nosync() call once, so keep
+	 * track with the atomic variable.
+	 */
+	count = atomic_dec_if_positive(cnt);
+	if (count >= 0)
+		disable_irq_nosync(irq);
+}
+
+/* disable the CORE interrupt */
+static void octeon_i2c_int_disable78(struct octeon_i2c *i2c)
+{
+	__octeon_i2c_irq_disable(&i2c->int_enable_cnt, i2c->irq);
+}
+
+/**
+ * octeon_i2c_hlc_int_enable78 - enable the ST interrupt
+ * @i2c: The struct octeon_i2c
+ *
+ * The interrupt will be asserted when there is non-STAT_IDLE state in
+ * the SW_TWSI_EOP_TWSI_STAT register.
+ */
+static void octeon_i2c_hlc_int_enable78(struct octeon_i2c *i2c)
+{
+	atomic_inc_return(&i2c->hlc_int_enable_cnt);
+	enable_irq(i2c->hlc_irq);
+}
+
+/* disable the ST interrupt */
+static void octeon_i2c_hlc_int_disable78(struct octeon_i2c *i2c)
+{
+	__octeon_i2c_irq_disable(&i2c->hlc_int_enable_cnt, i2c->hlc_irq);
+}
+
+/* HLC interrupt service routine */
+static irqreturn_t octeon_i2c_hlc_isr78(int irq, void *dev_id)
+{
+	struct octeon_i2c *i2c = dev_id;
+
+	i2c->hlc_int_disable(i2c);
+	wake_up(&i2c->queue);
+
+	return IRQ_HANDLED;
+}
+
+static void octeon_i2c_hlc_int_enable(struct octeon_i2c *i2c)
+{
+	octeon_i2c_write_int(i2c, TWSI_INT_ST_EN);
+}
+
+static u32 octeon_i2c_functionality(struct i2c_adapter *adap)
+{
+	return I2C_FUNC_I2C | (I2C_FUNC_SMBUS_EMUL & ~I2C_FUNC_SMBUS_QUICK) |
+	       I2C_FUNC_SMBUS_READ_BLOCK_DATA | I2C_SMBUS_BLOCK_PROC_CALL;
+}
+
+static const struct i2c_algorithm octeon_i2c_algo = {
+	.master_xfer = octeon_i2c_xfer,
+	.functionality = octeon_i2c_functionality,
+};
+
+static struct i2c_adapter octeon_i2c_ops = {
+	.owner = THIS_MODULE,
+	.name = "OCTEON adapter",
+	.algo = &octeon_i2c_algo,
+};
+
+static int octeon_i2c_probe(struct platform_device *pdev)
+{
+	struct device_node *node = pdev->dev.of_node;
+	int irq, result = 0, hlc_irq = 0;
+	struct resource *res_mem;
+	struct octeon_i2c *i2c;
+	bool cn78xx_style;
+
+	cn78xx_style = of_device_is_compatible(node, "cavium,octeon-7890-twsi");
+	if (cn78xx_style) {
+		hlc_irq = platform_get_irq(pdev, 0);
+		if (hlc_irq < 0)
+			return hlc_irq;
+
+		irq = platform_get_irq(pdev, 2);
+		if (irq < 0)
+			return irq;
+	} else {
+		/* All adaptors have an irq.  */
+		irq = platform_get_irq(pdev, 0);
+		if (irq < 0)
+			return irq;
+	}
+
+	i2c = devm_kzalloc(&pdev->dev, sizeof(*i2c), GFP_KERNEL);
+	if (!i2c) {
+		result = -ENOMEM;
+		goto out;
+	}
+	i2c->dev = &pdev->dev;
+
+	i2c->roff.sw_twsi = 0x00;
+	i2c->roff.twsi_int = 0x10;
+	i2c->roff.sw_twsi_ext = 0x18;
+
+	res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	i2c->twsi_base = devm_ioremap_resource(&pdev->dev, res_mem);
+	if (IS_ERR(i2c->twsi_base)) {
+		result = PTR_ERR(i2c->twsi_base);
+		goto out;
+	}
+
+	/*
+	 * "clock-rate" is a legacy binding, the official binding is
+	 * "clock-frequency".  Try the official one first and then
+	 * fall back if it doesn't exist.
+	 */
+	if (of_property_read_u32(node, "clock-frequency", &i2c->twsi_freq) &&
+	    of_property_read_u32(node, "clock-rate", &i2c->twsi_freq)) {
+		dev_err(i2c->dev,
+			"no I2C 'clock-rate' or 'clock-frequency' property\n");
+		result = -ENXIO;
+		goto out;
+	}
+
+	i2c->sys_freq = octeon_get_io_clock_rate();
+
+	init_waitqueue_head(&i2c->queue);
+
+	i2c->irq = irq;
+
+	if (cn78xx_style) {
+		i2c->hlc_irq = hlc_irq;
+
+		i2c->int_enable = octeon_i2c_int_enable78;
+		i2c->int_disable = octeon_i2c_int_disable78;
+		i2c->hlc_int_enable = octeon_i2c_hlc_int_enable78;
+		i2c->hlc_int_disable = octeon_i2c_hlc_int_disable78;
+
+		irq_set_status_flags(i2c->irq, IRQ_NOAUTOEN);
+		irq_set_status_flags(i2c->hlc_irq, IRQ_NOAUTOEN);
+
+		result = devm_request_irq(&pdev->dev, i2c->hlc_irq,
+					  octeon_i2c_hlc_isr78, 0,
+					  DRV_NAME, i2c);
+		if (result < 0) {
+			dev_err(i2c->dev, "failed to attach interrupt\n");
+			goto out;
+		}
+	} else {
+		i2c->int_enable = octeon_i2c_int_enable;
+		i2c->int_disable = octeon_i2c_int_disable;
+		i2c->hlc_int_enable = octeon_i2c_hlc_int_enable;
+		i2c->hlc_int_disable = octeon_i2c_int_disable;
+	}
+
+	result = devm_request_irq(&pdev->dev, i2c->irq,
+				  octeon_i2c_isr, 0, DRV_NAME, i2c);
+	if (result < 0) {
+		dev_err(i2c->dev, "failed to attach interrupt\n");
+		goto out;
+	}
+
+	if (OCTEON_IS_MODEL(OCTEON_CN38XX))
+		i2c->broken_irq_check = true;
+
+	result = octeon_i2c_init_lowlevel(i2c);
+	if (result) {
+		dev_err(i2c->dev, "init low level failed\n");
+		goto  out;
+	}
+
+	octeon_i2c_set_clock(i2c);
+
+	i2c->adap = octeon_i2c_ops;
+	i2c->adap.timeout = msecs_to_jiffies(2);
+	i2c->adap.retries = 5;
+	i2c->adap.bus_recovery_info = &octeon_i2c_recovery_info;
+	i2c->adap.dev.parent = &pdev->dev;
+	i2c->adap.dev.of_node = node;
+	i2c_set_adapdata(&i2c->adap, i2c);
+	platform_set_drvdata(pdev, i2c);
+
+	result = i2c_add_adapter(&i2c->adap);
+	if (result < 0)
+		goto out;
+	dev_info(i2c->dev, "probed\n");
+	return 0;
+
+out:
+	return result;
+};
+
+static int octeon_i2c_remove(struct platform_device *pdev)
+{
+	struct octeon_i2c *i2c = platform_get_drvdata(pdev);
+
+	i2c_del_adapter(&i2c->adap);
+	return 0;
+};
+
+static const struct of_device_id octeon_i2c_match[] = {
+	{ .compatible = "cavium,octeon-3860-twsi", },
+	{ .compatible = "cavium,octeon-7890-twsi", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, octeon_i2c_match);
+
+static struct platform_driver octeon_i2c_driver = {
+	.probe		= octeon_i2c_probe,
+	.remove		= octeon_i2c_remove,
+	.driver		= {
+		.name	= DRV_NAME,
+		.of_match_table = octeon_i2c_match,
+	},
+};
+
+module_platform_driver(octeon_i2c_driver);
+
+MODULE_AUTHOR("Michael Lawnick <michael.lawnick.ext@nsn.com>");
+MODULE_DESCRIPTION("I2C-Bus adapter for Cavium OCTEON processors");
+MODULE_LICENSE("GPL");
diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index ab1279b8e240..c7da0c42baee 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -1425,10 +1425,8 @@ omap_i2c_probe(struct platform_device *pdev)
 	/* i2c device drivers may be active on return from add_adapter() */
 	adap->nr = pdev->id;
 	r = i2c_add_numbered_adapter(adap);
-	if (r) {
-		dev_err(omap->dev, "failure adding adapter\n");
+	if (r)
 		goto err_unuse_clocks;
-	}
 
 	dev_info(omap->dev, "bus %d rev%d.%d at %d kHz\n", adap->nr,
 		 major, minor, omap->speed);
diff --git a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c
index 23d1c167b5d7..c2268cdf38e8 100644
--- a/drivers/i2c/busses/i2c-piix4.c
+++ b/drivers/i2c/busses/i2c-piix4.c
@@ -694,7 +694,6 @@ static int piix4_add_adapter(struct pci_dev *dev, unsigned short smba,
 
 	retval = i2c_add_adapter(adap);
 	if (retval) {
-		dev_err(&dev->dev, "Couldn't register adapter!\n");
 		kfree(adapdata);
 		kfree(adap);
 		release_region(smba, SMBIOSIZE);
diff --git a/drivers/i2c/busses/i2c-pmcmsp.c b/drivers/i2c/busses/i2c-pmcmsp.c
index 2c40edbf6224..217c78711d65 100644
--- a/drivers/i2c/busses/i2c-pmcmsp.c
+++ b/drivers/i2c/busses/i2c-pmcmsp.c
@@ -329,10 +329,8 @@ static int pmcmsptwi_probe(struct platform_device *pldev)
 	i2c_set_adapdata(&pmcmsptwi_adapter, &pmcmsptwi_data);
 
 	rc = i2c_add_adapter(&pmcmsptwi_adapter);
-	if (rc) {
-		dev_err(&pldev->dev, "Unable to register I2C adapter\n");
+	if (rc)
 		goto ret_unmap;
-	}
 
 	return 0;
 
diff --git a/drivers/i2c/busses/i2c-pnx.c b/drivers/i2c/busses/i2c-pnx.c
index 7ea67aa46fb7..fd5f9d2bf6d9 100644
--- a/drivers/i2c/busses/i2c-pnx.c
+++ b/drivers/i2c/busses/i2c-pnx.c
@@ -714,10 +714,8 @@ static int i2c_pnx_probe(struct platform_device *pdev)
 
 	/* Register this adapter with the I2C subsystem */
 	ret = i2c_add_numbered_adapter(&alg_data->adapter);
-	if (ret < 0) {
-		dev_err(&pdev->dev, "I2C: Failed to add bus\n");
+	if (ret < 0)
 		goto out_clock;
-	}
 
 	dev_dbg(&pdev->dev, "%s: Master at %#8x, irq %d.\n",
 		alg_data->adapter.name, res->start, alg_data->irq);
diff --git a/drivers/i2c/busses/i2c-puv3.c b/drivers/i2c/busses/i2c-puv3.c
index 82b6f02544da..0c8b1571886d 100644
--- a/drivers/i2c/busses/i2c-puv3.c
+++ b/drivers/i2c/busses/i2c-puv3.c
@@ -212,11 +212,8 @@ static int puv3_i2c_probe(struct platform_device *pdev)
 
 	adapter->nr = pdev->id;
 	rc = i2c_add_numbered_adapter(adapter);
-	if (rc) {
-		dev_err(&pdev->dev, "Adapter '%s' registration failed\n",
-				adapter->name);
+	if (rc)
 		goto fail_add_adapter;
-	}
 
 	dev_info(&pdev->dev, "PKUnity v3 i2c bus adapter.\n");
 	return 0;
diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c
index 0d351954db02..e28b825b0433 100644
--- a/drivers/i2c/busses/i2c-pxa.c
+++ b/drivers/i2c/busses/i2c-pxa.c
@@ -1292,10 +1292,8 @@ static int i2c_pxa_probe(struct platform_device *dev)
 #endif
 
 	ret = i2c_add_numbered_adapter(&i2c->adap);
-	if (ret < 0) {
-		dev_err(&dev->dev, "failed to add bus: %d\n", ret);
+	if (ret < 0)
 		goto ereqirq;
-	}
 
 	platform_set_drvdata(dev, i2c);
 
diff --git a/drivers/i2c/busses/i2c-rcar.c b/drivers/i2c/busses/i2c-rcar.c
index 9bd849dacee8..726615e54f2a 100644
--- a/drivers/i2c/busses/i2c-rcar.c
+++ b/drivers/i2c/busses/i2c-rcar.c
@@ -802,6 +802,7 @@ static const struct of_device_id rcar_i2c_dt_ids[] = {
 	{ .compatible = "renesas,i2c-r8a7793", .data = (void *)I2C_RCAR_GEN2 },
 	{ .compatible = "renesas,i2c-r8a7794", .data = (void *)I2C_RCAR_GEN2 },
 	{ .compatible = "renesas,i2c-r8a7795", .data = (void *)I2C_RCAR_GEN3 },
+	{ .compatible = "renesas,i2c-r8a7796", .data = (void *)I2C_RCAR_GEN3 },
 	{},
 };
 MODULE_DEVICE_TABLE(of, rcar_i2c_dt_ids);
@@ -875,10 +876,8 @@ static int rcar_i2c_probe(struct platform_device *pdev)
 	platform_set_drvdata(pdev, priv);
 
 	ret = i2c_add_numbered_adapter(adap);
-	if (ret < 0) {
-		dev_err(dev, "reg adap failed: %d\n", ret);
+	if (ret < 0)
 		goto out_pm_disable;
-	}
 
 	dev_info(dev, "probed\n");
 
diff --git a/drivers/i2c/busses/i2c-riic.c b/drivers/i2c/busses/i2c-riic.c
index d7e3af671543..6263ea82d6ac 100644
--- a/drivers/i2c/busses/i2c-riic.c
+++ b/drivers/i2c/busses/i2c-riic.c
@@ -383,10 +383,8 @@ static int riic_i2c_probe(struct platform_device *pdev)
 
 
 	ret = i2c_add_adapter(adap);
-	if (ret) {
-		dev_err(&pdev->dev, "failed to add adapter\n");
+	if (ret)
 		return ret;
-	}
 
 	platform_set_drvdata(pdev, riic);
 
diff --git a/drivers/i2c/busses/i2c-rk3x.c b/drivers/i2c/busses/i2c-rk3x.c
index 5c5b7cada8be..50702c7bb244 100644
--- a/drivers/i2c/busses/i2c-rk3x.c
+++ b/drivers/i2c/busses/i2c-rk3x.c
@@ -58,7 +58,7 @@ enum {
 #define REG_CON_LASTACK   BIT(5) /* 1: send NACK after last received byte */
 #define REG_CON_ACTACK    BIT(6) /* 1: stop if NACK is received */
 
-#define REG_CON_TUNING_MASK GENMASK(15, 8)
+#define REG_CON_TUNING_MASK GENMASK_ULL(15, 8)
 
 #define REG_CON_SDA_CFG(cfg) ((cfg) << 8)
 #define REG_CON_STA_CFG(cfg) ((cfg) << 12)
@@ -742,7 +742,7 @@ static int rk3x_i2c_v1_calc_timings(unsigned long clk_rate,
 				    struct i2c_timings *t,
 				    struct rk3x_i2c_calced_timings *t_calc)
 {
-	unsigned long min_low_ns, min_high_ns, min_total_ns;
+	unsigned long min_low_ns, min_high_ns;
 	unsigned long min_setup_start_ns, min_setup_data_ns;
 	unsigned long min_setup_stop_ns, max_hold_data_ns;
 
@@ -793,7 +793,6 @@ static int rk3x_i2c_v1_calc_timings(unsigned long clk_rate,
 
 	/* These are the min dividers needed for min hold times. */
 	min_div_for_hold = (min_low_div + min_high_div);
-	min_total_ns = min_low_ns + min_high_ns;
 
 	/*
 	 * This is the maximum divider so we don't go over the maximum.
@@ -1312,10 +1311,8 @@ static int rk3x_i2c_probe(struct platform_device *pdev)
 	rk3x_i2c_adapt_div(i2c, clk_rate);
 
 	ret = i2c_add_adapter(&i2c->adap);
-	if (ret < 0) {
-		dev_err(&pdev->dev, "Could not register adapter\n");
+	if (ret < 0)
 		goto err_clk_notifier;
-	}
 
 	dev_info(&pdev->dev, "Initialized RK3xxx I2C bus at %p\n", i2c->regs);
 
diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c
index 38dc1cacfd8b..499af26e736e 100644
--- a/drivers/i2c/busses/i2c-s3c2410.c
+++ b/drivers/i2c/busses/i2c-s3c2410.c
@@ -1215,7 +1215,6 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev)
 
 	ret = i2c_add_numbered_adapter(&i2c->adap);
 	if (ret < 0) {
-		dev_err(&pdev->dev, "failed to add bus to i2c core\n");
 		pm_runtime_disable(&pdev->dev);
 		s3c24xx_i2c_deregister_cpufreq(i2c);
 		clk_unprepare(i2c->clk);
diff --git a/drivers/i2c/busses/i2c-sh7760.c b/drivers/i2c/busses/i2c-sh7760.c
index 24968384b401..c2005c789d2b 100644
--- a/drivers/i2c/busses/i2c-sh7760.c
+++ b/drivers/i2c/busses/i2c-sh7760.c
@@ -510,10 +510,8 @@ static int sh7760_i2c_probe(struct platform_device *pdev)
 	}
 
 	ret = i2c_add_numbered_adapter(&id->adap);
-	if (ret < 0) {
-		dev_err(&pdev->dev, "reg adap failed: %d\n", ret);
+	if (ret < 0)
 		goto out4;
-	}
 
 	platform_set_drvdata(pdev, id);
 
diff --git a/drivers/i2c/busses/i2c-sh_mobile.c b/drivers/i2c/busses/i2c-sh_mobile.c
index 05b1eeab9cf5..192f36f00e4d 100644
--- a/drivers/i2c/busses/i2c-sh_mobile.c
+++ b/drivers/i2c/busses/i2c-sh_mobile.c
@@ -981,7 +981,6 @@ static int sh_mobile_i2c_probe(struct platform_device *dev)
 	ret = i2c_add_numbered_adapter(adap);
 	if (ret < 0) {
 		sh_mobile_i2c_release_dma(pd);
-		dev_err(&dev->dev, "cannot add numbered adapter\n");
 		return ret;
 	}
 
diff --git a/drivers/i2c/busses/i2c-sirf.c b/drivers/i2c/busses/i2c-sirf.c
index 792a42bdd335..95e81d0f72b4 100644
--- a/drivers/i2c/busses/i2c-sirf.c
+++ b/drivers/i2c/busses/i2c-sirf.c
@@ -387,10 +387,8 @@ static int i2c_sirfsoc_probe(struct platform_device *pdev)
 		writel(regval, siic->base + SIRFSOC_I2C_SDA_DELAY);
 
 	err = i2c_add_numbered_adapter(adap);
-	if (err < 0) {
-		dev_err(&pdev->dev, "Can't add new i2c adapter\n");
+	if (err < 0)
 		goto out;
-	}
 
 	clk_disable(clk);
 
diff --git a/drivers/i2c/busses/i2c-st.c b/drivers/i2c/busses/i2c-st.c
index 944ec4205084..1371547ce1a3 100644
--- a/drivers/i2c/busses/i2c-st.c
+++ b/drivers/i2c/busses/i2c-st.c
@@ -874,10 +874,8 @@ static int st_i2c_probe(struct platform_device *pdev)
 	init_completion(&i2c_dev->complete);
 
 	ret = i2c_add_adapter(adap);
-	if (ret) {
-		dev_err(&pdev->dev, "Failed to add adapter\n");
+	if (ret)
 		return ret;
-	}
 
 	platform_set_drvdata(pdev, i2c_dev);
 
diff --git a/drivers/i2c/busses/i2c-stu300.c b/drivers/i2c/busses/i2c-stu300.c
index 460c134832ac..dc63236b45b2 100644
--- a/drivers/i2c/busses/i2c-stu300.c
+++ b/drivers/i2c/busses/i2c-stu300.c
@@ -920,11 +920,8 @@ static int stu300_probe(struct platform_device *pdev)
 
 	/* i2c device drivers may be active on return from add_adapter() */
 	ret = i2c_add_numbered_adapter(adap);
-	if (ret) {
-		dev_err(&pdev->dev, "failure adding ST Micro DDC "
-		       "I2C adapter\n");
+	if (ret)
 		return ret;
-	}
 
 	platform_set_drvdata(pdev, dev);
 	dev_info(&pdev->dev, "ST DDC I2C @ %p, irq %d\n",
diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c
index b126dbaa47e3..4af9bbae20df 100644
--- a/drivers/i2c/busses/i2c-tegra.c
+++ b/drivers/i2c/busses/i2c-tegra.c
@@ -28,6 +28,9 @@
 #include <linux/of_device.h>
 #include <linux/module.h>
 #include <linux/reset.h>
+#include <linux/pinctrl/consumer.h>
+#include <linux/pm_runtime.h>
+#include <linux/iopoll.h>
 
 #include <asm/unaligned.h>
 
@@ -36,21 +39,21 @@
 
 #define I2C_CNFG				0x000
 #define I2C_CNFG_DEBOUNCE_CNT_SHIFT		12
-#define I2C_CNFG_PACKET_MODE_EN			(1<<10)
-#define I2C_CNFG_NEW_MASTER_FSM			(1<<11)
-#define I2C_CNFG_MULTI_MASTER_MODE		(1<<17)
+#define I2C_CNFG_PACKET_MODE_EN			BIT(10)
+#define I2C_CNFG_NEW_MASTER_FSM			BIT(11)
+#define I2C_CNFG_MULTI_MASTER_MODE		BIT(17)
 #define I2C_STATUS				0x01C
 #define I2C_SL_CNFG				0x020
-#define I2C_SL_CNFG_NACK			(1<<1)
-#define I2C_SL_CNFG_NEWSL			(1<<2)
+#define I2C_SL_CNFG_NACK			BIT(1)
+#define I2C_SL_CNFG_NEWSL			BIT(2)
 #define I2C_SL_ADDR1				0x02c
 #define I2C_SL_ADDR2				0x030
 #define I2C_TX_FIFO				0x050
 #define I2C_RX_FIFO				0x054
 #define I2C_PACKET_TRANSFER_STATUS		0x058
 #define I2C_FIFO_CONTROL			0x05c
-#define I2C_FIFO_CONTROL_TX_FLUSH		(1<<1)
-#define I2C_FIFO_CONTROL_RX_FLUSH		(1<<0)
+#define I2C_FIFO_CONTROL_TX_FLUSH		BIT(1)
+#define I2C_FIFO_CONTROL_RX_FLUSH		BIT(0)
 #define I2C_FIFO_CONTROL_TX_TRIG_SHIFT		5
 #define I2C_FIFO_CONTROL_RX_TRIG_SHIFT		2
 #define I2C_FIFO_STATUS				0x060
@@ -60,26 +63,26 @@
 #define I2C_FIFO_STATUS_RX_SHIFT		0
 #define I2C_INT_MASK				0x064
 #define I2C_INT_STATUS				0x068
-#define I2C_INT_PACKET_XFER_COMPLETE		(1<<7)
-#define I2C_INT_ALL_PACKETS_XFER_COMPLETE	(1<<6)
-#define I2C_INT_TX_FIFO_OVERFLOW		(1<<5)
-#define I2C_INT_RX_FIFO_UNDERFLOW		(1<<4)
-#define I2C_INT_NO_ACK				(1<<3)
-#define I2C_INT_ARBITRATION_LOST		(1<<2)
-#define I2C_INT_TX_FIFO_DATA_REQ		(1<<1)
-#define I2C_INT_RX_FIFO_DATA_REQ		(1<<0)
+#define I2C_INT_PACKET_XFER_COMPLETE		BIT(7)
+#define I2C_INT_ALL_PACKETS_XFER_COMPLETE	BIT(6)
+#define I2C_INT_TX_FIFO_OVERFLOW		BIT(5)
+#define I2C_INT_RX_FIFO_UNDERFLOW		BIT(4)
+#define I2C_INT_NO_ACK				BIT(3)
+#define I2C_INT_ARBITRATION_LOST		BIT(2)
+#define I2C_INT_TX_FIFO_DATA_REQ		BIT(1)
+#define I2C_INT_RX_FIFO_DATA_REQ		BIT(0)
 #define I2C_CLK_DIVISOR				0x06c
 #define I2C_CLK_DIVISOR_STD_FAST_MODE_SHIFT	16
 #define I2C_CLK_MULTIPLIER_STD_FAST_MODE	8
 
 #define DVC_CTRL_REG1				0x000
-#define DVC_CTRL_REG1_INTR_EN			(1<<10)
+#define DVC_CTRL_REG1_INTR_EN			BIT(10)
 #define DVC_CTRL_REG2				0x004
 #define DVC_CTRL_REG3				0x008
-#define DVC_CTRL_REG3_SW_PROG			(1<<26)
-#define DVC_CTRL_REG3_I2C_DONE_INTR_EN		(1<<30)
+#define DVC_CTRL_REG3_SW_PROG			BIT(26)
+#define DVC_CTRL_REG3_I2C_DONE_INTR_EN		BIT(30)
 #define DVC_STATUS				0x00c
-#define DVC_STATUS_I2C_DONE_INTR		(1<<30)
+#define DVC_STATUS_I2C_DONE_INTR		BIT(30)
 
 #define I2C_ERR_NONE				0x00
 #define I2C_ERR_NO_ACK				0x01
@@ -89,26 +92,28 @@
 #define PACKET_HEADER0_HEADER_SIZE_SHIFT	28
 #define PACKET_HEADER0_PACKET_ID_SHIFT		16
 #define PACKET_HEADER0_CONT_ID_SHIFT		12
-#define PACKET_HEADER0_PROTOCOL_I2C		(1<<4)
-
-#define I2C_HEADER_HIGHSPEED_MODE		(1<<22)
-#define I2C_HEADER_CONT_ON_NAK			(1<<21)
-#define I2C_HEADER_SEND_START_BYTE		(1<<20)
-#define I2C_HEADER_READ				(1<<19)
-#define I2C_HEADER_10BIT_ADDR			(1<<18)
-#define I2C_HEADER_IE_ENABLE			(1<<17)
-#define I2C_HEADER_REPEAT_START			(1<<16)
-#define I2C_HEADER_CONTINUE_XFER		(1<<15)
+#define PACKET_HEADER0_PROTOCOL_I2C		BIT(4)
+
+#define I2C_HEADER_HIGHSPEED_MODE		BIT(22)
+#define I2C_HEADER_CONT_ON_NAK			BIT(21)
+#define I2C_HEADER_SEND_START_BYTE		BIT(20)
+#define I2C_HEADER_READ				BIT(19)
+#define I2C_HEADER_10BIT_ADDR			BIT(18)
+#define I2C_HEADER_IE_ENABLE			BIT(17)
+#define I2C_HEADER_REPEAT_START			BIT(16)
+#define I2C_HEADER_CONTINUE_XFER		BIT(15)
 #define I2C_HEADER_MASTER_ADDR_SHIFT		12
 #define I2C_HEADER_SLAVE_ADDR_SHIFT		1
 
 #define I2C_CONFIG_LOAD				0x08C
-#define I2C_MSTR_CONFIG_LOAD			(1 << 0)
-#define I2C_SLV_CONFIG_LOAD			(1 << 1)
-#define I2C_TIMEOUT_CONFIG_LOAD			(1 << 2)
+#define I2C_MSTR_CONFIG_LOAD			BIT(0)
+#define I2C_SLV_CONFIG_LOAD			BIT(1)
+#define I2C_TIMEOUT_CONFIG_LOAD			BIT(2)
 
 #define I2C_CLKEN_OVERRIDE			0x090
-#define I2C_MST_CORE_CLKEN_OVR			(1 << 0)
+#define I2C_MST_CORE_CLKEN_OVR			BIT(0)
+
+#define I2C_CONFIG_LOAD_TIMEOUT			1000000
 
 /*
  * msg_end_type: The bus control which need to be send at end of transfer.
@@ -191,9 +196,11 @@ struct tegra_i2c_dev {
 	u16 clk_divisor_non_hs_mode;
 	bool is_suspended;
 	bool is_multimaster_mode;
+	spinlock_t xfer_lock;
 };
 
-static void dvc_writel(struct tegra_i2c_dev *i2c_dev, u32 val, unsigned long reg)
+static void dvc_writel(struct tegra_i2c_dev *i2c_dev, u32 val,
+		       unsigned long reg)
 {
 	writel(val, i2c_dev->base + reg);
 }
@@ -244,15 +251,17 @@ static void i2c_readsl(struct tegra_i2c_dev *i2c_dev, void *data,
 
 static void tegra_i2c_mask_irq(struct tegra_i2c_dev *i2c_dev, u32 mask)
 {
-	u32 int_mask = i2c_readl(i2c_dev, I2C_INT_MASK);
-	int_mask &= ~mask;
+	u32 int_mask;
+
+	int_mask = i2c_readl(i2c_dev, I2C_INT_MASK) & ~mask;
 	i2c_writel(i2c_dev, int_mask, I2C_INT_MASK);
 }
 
 static void tegra_i2c_unmask_irq(struct tegra_i2c_dev *i2c_dev, u32 mask)
 {
-	u32 int_mask = i2c_readl(i2c_dev, I2C_INT_MASK);
-	int_mask |= mask;
+	u32 int_mask;
+
+	int_mask = i2c_readl(i2c_dev, I2C_INT_MASK) | mask;
 	i2c_writel(i2c_dev, int_mask, I2C_INT_MASK);
 }
 
@@ -260,6 +269,7 @@ static int tegra_i2c_flush_fifos(struct tegra_i2c_dev *i2c_dev)
 {
 	unsigned long timeout = jiffies + HZ;
 	u32 val = i2c_readl(i2c_dev, I2C_FIFO_CONTROL);
+
 	val |= I2C_FIFO_CONTROL_TX_FLUSH | I2C_FIFO_CONTROL_RX_FLUSH;
 	i2c_writel(i2c_dev, val, I2C_FIFO_CONTROL);
 
@@ -385,7 +395,8 @@ static int tegra_i2c_fill_tx_fifo(struct tegra_i2c_dev *i2c_dev)
  */
 static void tegra_dvc_init(struct tegra_i2c_dev *i2c_dev)
 {
-	u32 val = 0;
+	u32 val;
+
 	val = dvc_readl(i2c_dev, DVC_CTRL_REG3);
 	val |= DVC_CTRL_REG3_SW_PROG;
 	val |= DVC_CTRL_REG3_I2C_DONE_INTR_EN;
@@ -396,9 +407,15 @@ static void tegra_dvc_init(struct tegra_i2c_dev *i2c_dev)
 	dvc_writel(i2c_dev, val, DVC_CTRL_REG1);
 }
 
-static inline int tegra_i2c_clock_enable(struct tegra_i2c_dev *i2c_dev)
+static int tegra_i2c_runtime_resume(struct device *dev)
 {
+	struct tegra_i2c_dev *i2c_dev = dev_get_drvdata(dev);
 	int ret;
+
+	ret = pinctrl_pm_select_default_state(i2c_dev->dev);
+	if (ret)
+		return ret;
+
 	if (!i2c_dev->hw->has_single_clk_source) {
 		ret = clk_enable(i2c_dev->fast_clk);
 		if (ret < 0) {
@@ -407,32 +424,66 @@ static inline int tegra_i2c_clock_enable(struct tegra_i2c_dev *i2c_dev)
 			return ret;
 		}
 	}
+
 	ret = clk_enable(i2c_dev->div_clk);
 	if (ret < 0) {
 		dev_err(i2c_dev->dev,
 			"Enabling div clk failed, err %d\n", ret);
 		clk_disable(i2c_dev->fast_clk);
+		return ret;
 	}
-	return ret;
+
+	return 0;
 }
 
-static inline void tegra_i2c_clock_disable(struct tegra_i2c_dev *i2c_dev)
+static int tegra_i2c_runtime_suspend(struct device *dev)
 {
+	struct tegra_i2c_dev *i2c_dev = dev_get_drvdata(dev);
+
 	clk_disable(i2c_dev->div_clk);
 	if (!i2c_dev->hw->has_single_clk_source)
 		clk_disable(i2c_dev->fast_clk);
+
+	return pinctrl_pm_select_idle_state(i2c_dev->dev);
+}
+
+static int tegra_i2c_wait_for_config_load(struct tegra_i2c_dev *i2c_dev)
+{
+	unsigned long reg_offset;
+	void __iomem *addr;
+	u32 val;
+	int err;
+
+	if (i2c_dev->hw->has_config_load_reg) {
+		reg_offset = tegra_i2c_reg_addr(i2c_dev, I2C_CONFIG_LOAD);
+		addr = i2c_dev->base + reg_offset;
+		i2c_writel(i2c_dev, I2C_MSTR_CONFIG_LOAD, I2C_CONFIG_LOAD);
+		if (in_interrupt())
+			err = readl_poll_timeout_atomic(addr, val, val == 0,
+					1000, I2C_CONFIG_LOAD_TIMEOUT);
+		else
+			err = readl_poll_timeout(addr, val, val == 0,
+					1000, I2C_CONFIG_LOAD_TIMEOUT);
+
+		if (err) {
+			dev_warn(i2c_dev->dev,
+				 "timeout waiting for config load\n");
+			return err;
+		}
+	}
+
+	return 0;
 }
 
 static int tegra_i2c_init(struct tegra_i2c_dev *i2c_dev)
 {
 	u32 val;
-	int err = 0;
+	int err;
 	u32 clk_divisor;
-	unsigned long timeout = jiffies + HZ;
 
-	err = tegra_i2c_clock_enable(i2c_dev);
+	err = pm_runtime_get_sync(i2c_dev->dev);
 	if (err < 0) {
-		dev_err(i2c_dev->dev, "Clock enable failed %d\n", err);
+		dev_err(i2c_dev->dev, "runtime resume failed %d\n", err);
 		return err;
 	}
 
@@ -460,54 +511,59 @@ static int tegra_i2c_init(struct tegra_i2c_dev *i2c_dev)
 
 	if (!i2c_dev->is_dvc) {
 		u32 sl_cfg = i2c_readl(i2c_dev, I2C_SL_CNFG);
+
 		sl_cfg |= I2C_SL_CNFG_NACK | I2C_SL_CNFG_NEWSL;
 		i2c_writel(i2c_dev, sl_cfg, I2C_SL_CNFG);
 		i2c_writel(i2c_dev, 0xfc, I2C_SL_ADDR1);
 		i2c_writel(i2c_dev, 0x00, I2C_SL_ADDR2);
-
 	}
 
 	val = 7 << I2C_FIFO_CONTROL_TX_TRIG_SHIFT |
 		0 << I2C_FIFO_CONTROL_RX_TRIG_SHIFT;
 	i2c_writel(i2c_dev, val, I2C_FIFO_CONTROL);
 
-	if (tegra_i2c_flush_fifos(i2c_dev))
-		err = -ETIMEDOUT;
+	err = tegra_i2c_flush_fifos(i2c_dev);
+	if (err)
+		goto err;
 
 	if (i2c_dev->is_multimaster_mode && i2c_dev->hw->has_slcg_override_reg)
 		i2c_writel(i2c_dev, I2C_MST_CORE_CLKEN_OVR, I2C_CLKEN_OVERRIDE);
 
-	if (i2c_dev->hw->has_config_load_reg) {
-		i2c_writel(i2c_dev, I2C_MSTR_CONFIG_LOAD, I2C_CONFIG_LOAD);
-		while (i2c_readl(i2c_dev, I2C_CONFIG_LOAD) != 0) {
-			if (time_after(jiffies, timeout)) {
-				dev_warn(i2c_dev->dev,
-					"timeout waiting for config load\n");
-				err = -ETIMEDOUT;
-				goto err;
-			}
-			msleep(1);
-		}
-	}
+	err = tegra_i2c_wait_for_config_load(i2c_dev);
+	if (err)
+		goto err;
 
 	if (i2c_dev->irq_disabled) {
-		i2c_dev->irq_disabled = 0;
+		i2c_dev->irq_disabled = false;
 		enable_irq(i2c_dev->irq);
 	}
 
 err:
-	tegra_i2c_clock_disable(i2c_dev);
+	pm_runtime_put(i2c_dev->dev);
 	return err;
 }
 
+static int tegra_i2c_disable_packet_mode(struct tegra_i2c_dev *i2c_dev)
+{
+	u32 cnfg;
+
+	cnfg = i2c_readl(i2c_dev, I2C_CNFG);
+	if (cnfg & I2C_CNFG_PACKET_MODE_EN)
+		i2c_writel(i2c_dev, cnfg & ~I2C_CNFG_PACKET_MODE_EN, I2C_CNFG);
+
+	return tegra_i2c_wait_for_config_load(i2c_dev);
+}
+
 static irqreturn_t tegra_i2c_isr(int irq, void *dev_id)
 {
 	u32 status;
 	const u32 status_err = I2C_INT_NO_ACK | I2C_INT_ARBITRATION_LOST;
 	struct tegra_i2c_dev *i2c_dev = dev_id;
+	unsigned long flags;
 
 	status = i2c_readl(i2c_dev, I2C_INT_STATUS);
 
+	spin_lock_irqsave(&i2c_dev->xfer_lock, flags);
 	if (status == 0) {
 		dev_warn(i2c_dev->dev, "irq status 0 %08x %08x %08x\n",
 			 i2c_readl(i2c_dev, I2C_PACKET_TRANSFER_STATUS),
@@ -517,12 +573,13 @@ static irqreturn_t tegra_i2c_isr(int irq, void *dev_id)
 
 		if (!i2c_dev->irq_disabled) {
 			disable_irq_nosync(i2c_dev->irq);
-			i2c_dev->irq_disabled = 1;
+			i2c_dev->irq_disabled = true;
 		}
 		goto err;
 	}
 
 	if (unlikely(status & status_err)) {
+		tegra_i2c_disable_packet_mode(i2c_dev);
 		if (status & I2C_INT_NO_ACK)
 			i2c_dev->msg_err |= I2C_ERR_NO_ACK;
 		if (status & I2C_INT_ARBITRATION_LOST)
@@ -552,7 +609,7 @@ static irqreturn_t tegra_i2c_isr(int irq, void *dev_id)
 		BUG_ON(i2c_dev->msg_buf_remaining);
 		complete(&i2c_dev->msg_complete);
 	}
-	return IRQ_HANDLED;
+	goto done;
 err:
 	/* An error occurred, mask all interrupts */
 	tegra_i2c_mask_irq(i2c_dev, I2C_INT_NO_ACK | I2C_INT_ARBITRATION_LOST |
@@ -563,6 +620,8 @@ err:
 		dvc_writel(i2c_dev, DVC_STATUS_I2C_DONE_INTR, DVC_STATUS);
 
 	complete(&i2c_dev->msg_complete);
+done:
+	spin_unlock_irqrestore(&i2c_dev->xfer_lock, flags);
 	return IRQ_HANDLED;
 }
 
@@ -572,6 +631,7 @@ static int tegra_i2c_xfer_msg(struct tegra_i2c_dev *i2c_dev,
 	u32 packet_header;
 	u32 int_mask;
 	unsigned long time_left;
+	unsigned long flags;
 
 	tegra_i2c_flush_fifos(i2c_dev);
 
@@ -584,6 +644,11 @@ static int tegra_i2c_xfer_msg(struct tegra_i2c_dev *i2c_dev,
 	i2c_dev->msg_read = (msg->flags & I2C_M_RD);
 	reinit_completion(&i2c_dev->msg_complete);
 
+	spin_lock_irqsave(&i2c_dev->xfer_lock, flags);
+
+	int_mask = I2C_INT_NO_ACK | I2C_INT_ARBITRATION_LOST;
+	tegra_i2c_unmask_irq(i2c_dev, int_mask);
+
 	packet_header = (0 << PACKET_HEADER0_HEADER_SIZE_SHIFT) |
 			PACKET_HEADER0_PROTOCOL_I2C |
 			(i2c_dev->cont_id << PACKET_HEADER0_CONT_ID_SHIFT) |
@@ -613,14 +678,15 @@ static int tegra_i2c_xfer_msg(struct tegra_i2c_dev *i2c_dev,
 	if (!(msg->flags & I2C_M_RD))
 		tegra_i2c_fill_tx_fifo(i2c_dev);
 
-	int_mask = I2C_INT_NO_ACK | I2C_INT_ARBITRATION_LOST;
 	if (i2c_dev->hw->has_per_pkt_xfer_complete_irq)
 		int_mask |= I2C_INT_PACKET_XFER_COMPLETE;
 	if (msg->flags & I2C_M_RD)
 		int_mask |= I2C_INT_RX_FIFO_DATA_REQ;
 	else if (i2c_dev->msg_buf_remaining)
 		int_mask |= I2C_INT_TX_FIFO_DATA_REQ;
+
 	tegra_i2c_unmask_irq(i2c_dev, int_mask);
+	spin_unlock_irqrestore(&i2c_dev->xfer_lock, flags);
 	dev_dbg(i2c_dev->dev, "unmasked irq: %02x\n",
 		i2c_readl(i2c_dev, I2C_INT_MASK));
 
@@ -643,9 +709,10 @@ static int tegra_i2c_xfer_msg(struct tegra_i2c_dev *i2c_dev,
 		return 0;
 
 	/*
-	 * NACK interrupt is generated before the I2C controller generates the
-	 * STOP condition on the bus. So wait for 2 clock periods before resetting
-	 * the controller so that STOP condition has been delivered properly.
+	 * NACK interrupt is generated before the I2C controller generates
+	 * the STOP condition on the bus. So wait for 2 clock periods
+	 * before resetting the controller so that the STOP condition has
+	 * been delivered properly.
 	 */
 	if (i2c_dev->msg_err == I2C_ERR_NO_ACK)
 		udelay(DIV_ROUND_UP(2 * 1000000, i2c_dev->bus_clk_rate));
@@ -670,14 +737,15 @@ static int tegra_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[],
 	if (i2c_dev->is_suspended)
 		return -EBUSY;
 
-	ret = tegra_i2c_clock_enable(i2c_dev);
+	ret = pm_runtime_get_sync(i2c_dev->dev);
 	if (ret < 0) {
-		dev_err(i2c_dev->dev, "Clock enable failed %d\n", ret);
+		dev_err(i2c_dev->dev, "runtime resume failed %d\n", ret);
 		return ret;
 	}
 
 	for (i = 0; i < num; i++) {
 		enum msg_end_type end_type = MSG_END_STOP;
+
 		if (i < (num - 1)) {
 			if (msgs[i + 1].flags & I2C_M_NOSTART)
 				end_type = MSG_END_CONTINUE;
@@ -688,7 +756,9 @@ static int tegra_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[],
 		if (ret)
 			break;
 	}
-	tegra_i2c_clock_disable(i2c_dev);
+
+	pm_runtime_put(i2c_dev->dev);
+
 	return ret ?: i;
 }
 
@@ -825,7 +895,7 @@ static int tegra_i2c_probe(struct platform_device *pdev)
 
 	div_clk = devm_clk_get(&pdev->dev, "div-clk");
 	if (IS_ERR(div_clk)) {
-		dev_err(&pdev->dev, "missing controller clock");
+		dev_err(&pdev->dev, "missing controller clock\n");
 		return PTR_ERR(div_clk);
 	}
 
@@ -843,27 +913,22 @@ static int tegra_i2c_probe(struct platform_device *pdev)
 
 	i2c_dev->rst = devm_reset_control_get(&pdev->dev, "i2c");
 	if (IS_ERR(i2c_dev->rst)) {
-		dev_err(&pdev->dev, "missing controller reset");
+		dev_err(&pdev->dev, "missing controller reset\n");
 		return PTR_ERR(i2c_dev->rst);
 	}
 
 	tegra_i2c_parse_dt(i2c_dev);
 
-	i2c_dev->hw = &tegra20_i2c_hw;
-
-	if (pdev->dev.of_node) {
-		i2c_dev->hw = of_device_get_match_data(&pdev->dev);
-		i2c_dev->is_dvc = of_device_is_compatible(pdev->dev.of_node,
-						"nvidia,tegra20-i2c-dvc");
-	} else if (pdev->id == 3) {
-		i2c_dev->is_dvc = 1;
-	}
+	i2c_dev->hw = of_device_get_match_data(&pdev->dev);
+	i2c_dev->is_dvc = of_device_is_compatible(pdev->dev.of_node,
+						  "nvidia,tegra20-i2c-dvc");
 	init_completion(&i2c_dev->msg_complete);
+	spin_lock_init(&i2c_dev->xfer_lock);
 
 	if (!i2c_dev->hw->has_single_clk_source) {
 		fast_clk = devm_clk_get(&pdev->dev, "fast-clk");
 		if (IS_ERR(fast_clk)) {
-			dev_err(&pdev->dev, "missing fast clock");
+			dev_err(&pdev->dev, "missing fast clock\n");
 			return PTR_ERR(fast_clk);
 		}
 		i2c_dev->fast_clk = fast_clk;
@@ -900,18 +965,27 @@ static int tegra_i2c_probe(struct platform_device *pdev)
 		goto unprepare_fast_clk;
 	}
 
+	pm_runtime_enable(&pdev->dev);
+	if (!pm_runtime_enabled(&pdev->dev)) {
+		ret = tegra_i2c_runtime_resume(&pdev->dev);
+		if (ret < 0) {
+			dev_err(&pdev->dev, "runtime resume failed\n");
+			goto unprepare_div_clk;
+		}
+	}
+
 	if (i2c_dev->is_multimaster_mode) {
 		ret = clk_enable(i2c_dev->div_clk);
 		if (ret < 0) {
 			dev_err(i2c_dev->dev, "div_clk enable failed %d\n",
 				ret);
-			goto unprepare_div_clk;
+			goto disable_rpm;
 		}
 	}
 
 	ret = tegra_i2c_init(i2c_dev);
 	if (ret) {
-		dev_err(&pdev->dev, "Failed to initialize i2c controller");
+		dev_err(&pdev->dev, "Failed to initialize i2c controller\n");
 		goto disable_div_clk;
 	}
 
@@ -925,17 +999,15 @@ static int tegra_i2c_probe(struct platform_device *pdev)
 	i2c_set_adapdata(&i2c_dev->adapter, i2c_dev);
 	i2c_dev->adapter.owner = THIS_MODULE;
 	i2c_dev->adapter.class = I2C_CLASS_DEPRECATED;
-	strlcpy(i2c_dev->adapter.name, "Tegra I2C adapter",
+	strlcpy(i2c_dev->adapter.name, dev_name(&pdev->dev),
 		sizeof(i2c_dev->adapter.name));
 	i2c_dev->adapter.dev.parent = &pdev->dev;
 	i2c_dev->adapter.nr = pdev->id;
 	i2c_dev->adapter.dev.of_node = pdev->dev.of_node;
 
 	ret = i2c_add_numbered_adapter(&i2c_dev->adapter);
-	if (ret) {
-		dev_err(&pdev->dev, "Failed to add I2C adapter\n");
+	if (ret)
 		goto disable_div_clk;
-	}
 
 	return 0;
 
@@ -943,6 +1015,11 @@ disable_div_clk:
 	if (i2c_dev->is_multimaster_mode)
 		clk_disable(i2c_dev->div_clk);
 
+disable_rpm:
+	pm_runtime_disable(&pdev->dev);
+	if (!pm_runtime_status_suspended(&pdev->dev))
+		tegra_i2c_runtime_suspend(&pdev->dev);
+
 unprepare_div_clk:
 	clk_unprepare(i2c_dev->div_clk);
 
@@ -956,11 +1033,16 @@ unprepare_fast_clk:
 static int tegra_i2c_remove(struct platform_device *pdev)
 {
 	struct tegra_i2c_dev *i2c_dev = platform_get_drvdata(pdev);
+
 	i2c_del_adapter(&i2c_dev->adapter);
 
 	if (i2c_dev->is_multimaster_mode)
 		clk_disable(i2c_dev->div_clk);
 
+	pm_runtime_disable(&pdev->dev);
+	if (!pm_runtime_status_suspended(&pdev->dev))
+		tegra_i2c_runtime_suspend(&pdev->dev);
+
 	clk_unprepare(i2c_dev->div_clk);
 	if (!i2c_dev->hw->has_single_clk_source)
 		clk_unprepare(i2c_dev->fast_clk);
@@ -988,20 +1070,19 @@ static int tegra_i2c_resume(struct device *dev)
 	i2c_lock_adapter(&i2c_dev->adapter);
 
 	ret = tegra_i2c_init(i2c_dev);
-
-	if (ret) {
-		i2c_unlock_adapter(&i2c_dev->adapter);
-		return ret;
-	}
-
-	i2c_dev->is_suspended = false;
+	if (!ret)
+		i2c_dev->is_suspended = false;
 
 	i2c_unlock_adapter(&i2c_dev->adapter);
 
-	return 0;
+	return ret;
 }
 
-static SIMPLE_DEV_PM_OPS(tegra_i2c_pm, tegra_i2c_suspend, tegra_i2c_resume);
+static const struct dev_pm_ops tegra_i2c_pm = {
+	SET_RUNTIME_PM_OPS(tegra_i2c_runtime_suspend, tegra_i2c_runtime_resume,
+			   NULL)
+	SET_SYSTEM_SLEEP_PM_OPS(tegra_i2c_suspend, tegra_i2c_resume)
+};
 #define TEGRA_I2C_PM	(&tegra_i2c_pm)
 #else
 #define TEGRA_I2C_PM	NULL
diff --git a/drivers/i2c/busses/i2c-thunderx-pcidrv.c b/drivers/i2c/busses/i2c-thunderx-pcidrv.c
new file mode 100644
index 000000000000..bba5b429f69c
--- /dev/null
+++ b/drivers/i2c/busses/i2c-thunderx-pcidrv.c
@@ -0,0 +1,259 @@
+/*
+ * Cavium ThunderX i2c driver.
+ *
+ * Copyright (C) 2015,2016 Cavium Inc.
+ * Authors: Fred Martin <fmartin@caviumnetworks.com>
+ *	    Jan Glauber <jglauber@cavium.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/acpi.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/i2c-smbus.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_irq.h>
+#include <linux/pci.h>
+
+#include "i2c-octeon-core.h"
+
+#define DRV_NAME "i2c-thunderx"
+
+#define PCI_DEVICE_ID_THUNDER_TWSI	0xa012
+
+#define SYS_FREQ_DEFAULT		700000000
+
+#define TWSI_INT_ENA_W1C		0x1028
+#define TWSI_INT_ENA_W1S		0x1030
+
+/*
+ * Enable the CORE interrupt.
+ * The interrupt will be asserted when there is non-STAT_IDLE state in the
+ * SW_TWSI_EOP_TWSI_STAT register.
+ */
+static void thunder_i2c_int_enable(struct octeon_i2c *i2c)
+{
+	octeon_i2c_writeq_flush(TWSI_INT_CORE_INT,
+				i2c->twsi_base + TWSI_INT_ENA_W1S);
+}
+
+/*
+ * Disable the CORE interrupt.
+ */
+static void thunder_i2c_int_disable(struct octeon_i2c *i2c)
+{
+	octeon_i2c_writeq_flush(TWSI_INT_CORE_INT,
+				i2c->twsi_base + TWSI_INT_ENA_W1C);
+}
+
+static void thunder_i2c_hlc_int_enable(struct octeon_i2c *i2c)
+{
+	octeon_i2c_writeq_flush(TWSI_INT_ST_INT | TWSI_INT_TS_INT,
+				i2c->twsi_base + TWSI_INT_ENA_W1S);
+}
+
+static void thunder_i2c_hlc_int_disable(struct octeon_i2c *i2c)
+{
+	octeon_i2c_writeq_flush(TWSI_INT_ST_INT | TWSI_INT_TS_INT,
+				i2c->twsi_base + TWSI_INT_ENA_W1C);
+}
+
+static u32 thunderx_i2c_functionality(struct i2c_adapter *adap)
+{
+	return I2C_FUNC_I2C | (I2C_FUNC_SMBUS_EMUL & ~I2C_FUNC_SMBUS_QUICK) |
+	       I2C_FUNC_SMBUS_READ_BLOCK_DATA | I2C_SMBUS_BLOCK_PROC_CALL;
+}
+
+static const struct i2c_algorithm thunderx_i2c_algo = {
+	.master_xfer = octeon_i2c_xfer,
+	.functionality = thunderx_i2c_functionality,
+};
+
+static struct i2c_adapter thunderx_i2c_ops = {
+	.owner	= THIS_MODULE,
+	.name	= "ThunderX adapter",
+	.algo	= &thunderx_i2c_algo,
+};
+
+static void thunder_i2c_clock_enable(struct device *dev, struct octeon_i2c *i2c)
+{
+	int ret;
+
+	i2c->clk = clk_get(dev, NULL);
+	if (IS_ERR(i2c->clk)) {
+		i2c->clk = NULL;
+		goto skip;
+	}
+
+	ret = clk_prepare_enable(i2c->clk);
+	if (ret)
+		goto skip;
+	i2c->sys_freq = clk_get_rate(i2c->clk);
+
+skip:
+	if (!i2c->sys_freq)
+		i2c->sys_freq = SYS_FREQ_DEFAULT;
+}
+
+static void thunder_i2c_clock_disable(struct device *dev, struct clk *clk)
+{
+	if (!clk)
+		return;
+	clk_disable_unprepare(clk);
+	clk_put(clk);
+}
+
+static int thunder_i2c_smbus_setup_of(struct octeon_i2c *i2c,
+				      struct device_node *node)
+{
+	u32 type;
+
+	if (!node)
+		return -EINVAL;
+
+	i2c->alert_data.irq = irq_of_parse_and_map(node, 0);
+	if (!i2c->alert_data.irq)
+		return -EINVAL;
+
+	type = irqd_get_trigger_type(irq_get_irq_data(i2c->alert_data.irq));
+	i2c->alert_data.alert_edge_triggered =
+		(type & IRQ_TYPE_LEVEL_MASK) ? 1 : 0;
+
+	i2c->ara = i2c_setup_smbus_alert(&i2c->adap, &i2c->alert_data);
+	if (!i2c->ara)
+		return -ENODEV;
+	return 0;
+}
+
+static int thunder_i2c_smbus_setup(struct octeon_i2c *i2c,
+				   struct device_node *node)
+{
+	/* TODO: ACPI support */
+	if (!acpi_disabled)
+		return -EOPNOTSUPP;
+
+	return thunder_i2c_smbus_setup_of(i2c, node);
+}
+
+static void thunder_i2c_smbus_remove(struct octeon_i2c *i2c)
+{
+	if (i2c->ara)
+		i2c_unregister_device(i2c->ara);
+}
+
+static int thunder_i2c_probe_pci(struct pci_dev *pdev,
+				 const struct pci_device_id *ent)
+{
+	struct device *dev = &pdev->dev;
+	struct octeon_i2c *i2c;
+	int ret;
+
+	i2c = devm_kzalloc(dev, sizeof(*i2c), GFP_KERNEL);
+	if (!i2c)
+		return -ENOMEM;
+
+	i2c->roff.sw_twsi = 0x1000;
+	i2c->roff.twsi_int = 0x1010;
+	i2c->roff.sw_twsi_ext = 0x1018;
+
+	i2c->dev = dev;
+	pci_set_drvdata(pdev, i2c);
+	ret = pcim_enable_device(pdev);
+	if (ret)
+		return ret;
+
+	ret = pci_request_regions(pdev, DRV_NAME);
+	if (ret)
+		return ret;
+
+	i2c->twsi_base = pcim_iomap(pdev, 0, pci_resource_len(pdev, 0));
+	if (!i2c->twsi_base)
+		return -EINVAL;
+
+	thunder_i2c_clock_enable(dev, i2c);
+	ret = device_property_read_u32(dev, "clock-frequency", &i2c->twsi_freq);
+	if (ret)
+		i2c->twsi_freq = 100000;
+
+	init_waitqueue_head(&i2c->queue);
+
+	i2c->int_enable = thunder_i2c_int_enable;
+	i2c->int_disable = thunder_i2c_int_disable;
+	i2c->hlc_int_enable = thunder_i2c_hlc_int_enable;
+	i2c->hlc_int_disable = thunder_i2c_hlc_int_disable;
+
+	ret = pci_enable_msix(pdev, &i2c->i2c_msix, 1);
+	if (ret)
+		goto error;
+
+	ret = devm_request_irq(dev, i2c->i2c_msix.vector, octeon_i2c_isr, 0,
+			       DRV_NAME, i2c);
+	if (ret)
+		goto error;
+
+	ret = octeon_i2c_init_lowlevel(i2c);
+	if (ret)
+		goto error;
+
+	octeon_i2c_set_clock(i2c);
+
+	i2c->adap = thunderx_i2c_ops;
+	i2c->adap.retries = 5;
+	i2c->adap.bus_recovery_info = &octeon_i2c_recovery_info;
+	i2c->adap.dev.parent = dev;
+	i2c->adap.dev.of_node = pdev->dev.of_node;
+	snprintf(i2c->adap.name, sizeof(i2c->adap.name),
+		 "Cavium ThunderX i2c adapter at %s", dev_name(dev));
+	i2c_set_adapdata(&i2c->adap, i2c);
+
+	ret = i2c_add_adapter(&i2c->adap);
+	if (ret)
+		goto error;
+
+	dev_info(i2c->dev, "Probed. Set system clock to %u\n", i2c->sys_freq);
+
+	ret = thunder_i2c_smbus_setup(i2c, pdev->dev.of_node);
+	if (ret)
+		dev_info(dev, "SMBUS alert not active on this bus\n");
+
+	return 0;
+
+error:
+	thunder_i2c_clock_disable(dev, i2c->clk);
+	return ret;
+}
+
+static void thunder_i2c_remove_pci(struct pci_dev *pdev)
+{
+	struct octeon_i2c *i2c = pci_get_drvdata(pdev);
+
+	thunder_i2c_smbus_remove(i2c);
+	thunder_i2c_clock_disable(&pdev->dev, i2c->clk);
+	i2c_del_adapter(&i2c->adap);
+}
+
+static const struct pci_device_id thunder_i2c_pci_id_table[] = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_CAVIUM, PCI_DEVICE_ID_THUNDER_TWSI) },
+	{ 0, }
+};
+
+MODULE_DEVICE_TABLE(pci, thunder_i2c_pci_id_table);
+
+static struct pci_driver thunder_i2c_pci_driver = {
+	.name		= DRV_NAME,
+	.id_table	= thunder_i2c_pci_id_table,
+	.probe		= thunder_i2c_probe_pci,
+	.remove		= thunder_i2c_remove_pci,
+};
+
+module_pci_driver(thunder_i2c_pci_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Fred Martin <fmartin@caviumnetworks.com>");
+MODULE_DESCRIPTION("I2C-Bus adapter for Cavium ThunderX SOC");
diff --git a/drivers/i2c/busses/i2c-uniphier-f.c b/drivers/i2c/busses/i2c-uniphier-f.c
index aeead0d27d10..db9105e52c79 100644
--- a/drivers/i2c/busses/i2c-uniphier-f.c
+++ b/drivers/i2c/busses/i2c-uniphier-f.c
@@ -14,6 +14,7 @@
 
 #include <linux/clk.h>
 #include <linux/i2c.h>
+#include <linux/iopoll.h>
 #include <linux/interrupt.h>
 #include <linux/io.h>
 #include <linux/module.h>
@@ -348,14 +349,19 @@ static int uniphier_fi2c_master_xfer_one(struct i2c_adapter *adap,
 	dev_dbg(&adap->dev, "complete\n");
 
 	if (unlikely(priv->flags & UNIPHIER_FI2C_DEFER_STOP_COMP)) {
-		u32 status = readl(priv->membase + UNIPHIER_FI2C_SR);
-
-		if (!(status & UNIPHIER_FI2C_SR_STS) ||
-		    status & UNIPHIER_FI2C_SR_BB) {
+		u32 status;
+		int ret;
+
+		ret = readl_poll_timeout(priv->membase + UNIPHIER_FI2C_SR,
+					 status,
+					 (status & UNIPHIER_FI2C_SR_STS) &&
+					 !(status & UNIPHIER_FI2C_SR_BB),
+					 1, 20);
+		if (ret) {
 			dev_err(&adap->dev,
 				"stop condition was not completed.\n");
 			uniphier_fi2c_recover(priv);
-			return -EBUSY;
+			return ret;
 		}
 	}
 
@@ -455,54 +461,25 @@ static struct i2c_bus_recovery_info uniphier_fi2c_bus_recovery_info = {
 	.unprepare_recovery = uniphier_fi2c_unprepare_recovery,
 };
 
-static int uniphier_fi2c_clk_init(struct device *dev,
-				  struct uniphier_fi2c_priv *priv)
+static void uniphier_fi2c_hw_init(struct uniphier_fi2c_priv *priv,
+				  u32 bus_speed, unsigned long clk_rate)
 {
-	struct device_node *np = dev->of_node;
-	unsigned long clk_rate;
-	u32 bus_speed, clk_count;
-	int ret;
-
-	if (of_property_read_u32(np, "clock-frequency", &bus_speed))
-		bus_speed = UNIPHIER_FI2C_DEFAULT_SPEED;
-
-	if (!bus_speed) {
-		dev_err(dev, "clock-frequency should not be zero\n");
-		return -EINVAL;
-	}
-
-	if (bus_speed > UNIPHIER_FI2C_MAX_SPEED)
-		bus_speed = UNIPHIER_FI2C_MAX_SPEED;
-
-	/* Get input clk rate through clk driver */
-	priv->clk = devm_clk_get(dev, NULL);
-	if (IS_ERR(priv->clk)) {
-		dev_err(dev, "failed to get clock\n");
-		return PTR_ERR(priv->clk);
-	}
+	u32 tmp;
 
-	ret = clk_prepare_enable(priv->clk);
-	if (ret)
-		return ret;
-
-	clk_rate = clk_get_rate(priv->clk);
-	if (!clk_rate) {
-		dev_err(dev, "input clock rate should not be zero\n");
-		return -EINVAL;
-	}
+	tmp = readl(priv->membase + UNIPHIER_FI2C_CR);
+	tmp |= UNIPHIER_FI2C_CR_MST;
+	writel(tmp, priv->membase + UNIPHIER_FI2C_CR);
 
 	uniphier_fi2c_reset(priv);
 
-	clk_count = clk_rate / bus_speed;
+	tmp = clk_rate / bus_speed;
 
-	writel(clk_count, priv->membase + UNIPHIER_FI2C_CYC);
-	writel(clk_count / 2, priv->membase + UNIPHIER_FI2C_LCTL);
-	writel(clk_count / 2, priv->membase + UNIPHIER_FI2C_SSUT);
-	writel(clk_count / 16, priv->membase + UNIPHIER_FI2C_DSUT);
+	writel(tmp, priv->membase + UNIPHIER_FI2C_CYC);
+	writel(tmp / 2, priv->membase + UNIPHIER_FI2C_LCTL);
+	writel(tmp / 2, priv->membase + UNIPHIER_FI2C_SSUT);
+	writel(tmp / 16, priv->membase + UNIPHIER_FI2C_DSUT);
 
 	uniphier_fi2c_prepare_operation(priv);
-
-	return 0;
 }
 
 static int uniphier_fi2c_probe(struct platform_device *pdev)
@@ -510,8 +487,9 @@ static int uniphier_fi2c_probe(struct platform_device *pdev)
 	struct device *dev = &pdev->dev;
 	struct uniphier_fi2c_priv *priv;
 	struct resource *regs;
-	int irq;
-	int ret;
+	u32 bus_speed;
+	unsigned long clk_rate;
+	int irq, ret;
 
 	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
 	if (!priv)
@@ -528,6 +506,31 @@ static int uniphier_fi2c_probe(struct platform_device *pdev)
 		return irq;
 	}
 
+	if (of_property_read_u32(dev->of_node, "clock-frequency", &bus_speed))
+		bus_speed = UNIPHIER_FI2C_DEFAULT_SPEED;
+
+	if (!bus_speed || bus_speed > UNIPHIER_FI2C_MAX_SPEED) {
+		dev_err(dev, "invalid clock-frequency %d\n", bus_speed);
+		return -EINVAL;
+	}
+
+	priv->clk = devm_clk_get(dev, NULL);
+	if (IS_ERR(priv->clk)) {
+		dev_err(dev, "failed to get clock\n");
+		return PTR_ERR(priv->clk);
+	}
+
+	ret = clk_prepare_enable(priv->clk);
+	if (ret)
+		return ret;
+
+	clk_rate = clk_get_rate(priv->clk);
+	if (!clk_rate) {
+		dev_err(dev, "input clock rate should not be zero\n");
+		ret = -EINVAL;
+		goto err;
+	}
+
 	init_completion(&priv->comp);
 	priv->adap.owner = THIS_MODULE;
 	priv->adap.algo = &uniphier_fi2c_algo;
@@ -538,9 +541,7 @@ static int uniphier_fi2c_probe(struct platform_device *pdev)
 	i2c_set_adapdata(&priv->adap, priv);
 	platform_set_drvdata(pdev, priv);
 
-	ret = uniphier_fi2c_clk_init(dev, priv);
-	if (ret)
-		goto err;
+	uniphier_fi2c_hw_init(priv, bus_speed, clk_rate);
 
 	ret = devm_request_irq(dev, irq, uniphier_fi2c_interrupt, 0,
 			       pdev->name, priv);
@@ -550,11 +551,6 @@ static int uniphier_fi2c_probe(struct platform_device *pdev)
 	}
 
 	ret = i2c_add_adapter(&priv->adap);
-	if (ret) {
-		dev_err(dev, "failed to add I2C adapter\n");
-		goto err;
-	}
-
 err:
 	if (ret)
 		clk_disable_unprepare(priv->clk);
diff --git a/drivers/i2c/busses/i2c-uniphier.c b/drivers/i2c/busses/i2c-uniphier.c
index 475a5eb514e2..56e92af46ddc 100644
--- a/drivers/i2c/busses/i2c-uniphier.c
+++ b/drivers/i2c/busses/i2c-uniphier.c
@@ -316,50 +316,15 @@ static struct i2c_bus_recovery_info uniphier_i2c_bus_recovery_info = {
 	.unprepare_recovery = uniphier_i2c_unprepare_recovery,
 };
 
-static int uniphier_i2c_clk_init(struct device *dev,
-				 struct uniphier_i2c_priv *priv)
+static void uniphier_i2c_hw_init(struct uniphier_i2c_priv *priv,
+				 u32 bus_speed, unsigned long clk_rate)
 {
-	struct device_node *np = dev->of_node;
-	unsigned long clk_rate;
-	u32 bus_speed;
-	int ret;
-
-	if (of_property_read_u32(np, "clock-frequency", &bus_speed))
-		bus_speed = UNIPHIER_I2C_DEFAULT_SPEED;
-
-	if (!bus_speed) {
-		dev_err(dev, "clock-frequency should not be zero\n");
-		return -EINVAL;
-	}
-
-	if (bus_speed > UNIPHIER_I2C_MAX_SPEED)
-		bus_speed = UNIPHIER_I2C_MAX_SPEED;
-
-	/* Get input clk rate through clk driver */
-	priv->clk = devm_clk_get(dev, NULL);
-	if (IS_ERR(priv->clk)) {
-		dev_err(dev, "failed to get clock\n");
-		return PTR_ERR(priv->clk);
-	}
-
-	ret = clk_prepare_enable(priv->clk);
-	if (ret)
-		return ret;
-
-	clk_rate = clk_get_rate(priv->clk);
-	if (!clk_rate) {
-		dev_err(dev, "input clock rate should not be zero\n");
-		return -EINVAL;
-	}
-
 	uniphier_i2c_reset(priv, true);
 
 	writel((clk_rate / bus_speed / 2 << 16) | (clk_rate / bus_speed),
 	       priv->membase + UNIPHIER_I2C_CLK);
 
 	uniphier_i2c_reset(priv, false);
-
-	return 0;
 }
 
 static int uniphier_i2c_probe(struct platform_device *pdev)
@@ -367,8 +332,9 @@ static int uniphier_i2c_probe(struct platform_device *pdev)
 	struct device *dev = &pdev->dev;
 	struct uniphier_i2c_priv *priv;
 	struct resource *regs;
-	int irq;
-	int ret;
+	u32 bus_speed;
+	unsigned long clk_rate;
+	int irq, ret;
 
 	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
 	if (!priv)
@@ -385,6 +351,31 @@ static int uniphier_i2c_probe(struct platform_device *pdev)
 		return irq;
 	}
 
+	if (of_property_read_u32(dev->of_node, "clock-frequency", &bus_speed))
+		bus_speed = UNIPHIER_I2C_DEFAULT_SPEED;
+
+	if (!bus_speed || bus_speed > UNIPHIER_I2C_MAX_SPEED) {
+		dev_err(dev, "invalid clock-frequency %d\n", bus_speed);
+		return -EINVAL;
+	}
+
+	priv->clk = devm_clk_get(dev, NULL);
+	if (IS_ERR(priv->clk)) {
+		dev_err(dev, "failed to get clock\n");
+		return PTR_ERR(priv->clk);
+	}
+
+	ret = clk_prepare_enable(priv->clk);
+	if (ret)
+		return ret;
+
+	clk_rate = clk_get_rate(priv->clk);
+	if (!clk_rate) {
+		dev_err(dev, "input clock rate should not be zero\n");
+		ret = -EINVAL;
+		goto err;
+	}
+
 	init_completion(&priv->comp);
 	priv->adap.owner = THIS_MODULE;
 	priv->adap.algo = &uniphier_i2c_algo;
@@ -395,9 +386,7 @@ static int uniphier_i2c_probe(struct platform_device *pdev)
 	i2c_set_adapdata(&priv->adap, priv);
 	platform_set_drvdata(pdev, priv);
 
-	ret = uniphier_i2c_clk_init(dev, priv);
-	if (ret)
-		goto err;
+	uniphier_i2c_hw_init(priv, bus_speed, clk_rate);
 
 	ret = devm_request_irq(dev, irq, uniphier_i2c_interrupt, 0, pdev->name,
 			       priv);
@@ -407,11 +396,6 @@ static int uniphier_i2c_probe(struct platform_device *pdev)
 	}
 
 	ret = i2c_add_adapter(&priv->adap);
-	if (ret) {
-		dev_err(dev, "failed to add I2C adapter\n");
-		goto err;
-	}
-
 err:
 	if (ret)
 		clk_disable_unprepare(priv->clk);
diff --git a/drivers/i2c/busses/i2c-wmt.c b/drivers/i2c/busses/i2c-wmt.c
index e1e3a85596c5..fbd0fd59f312 100644
--- a/drivers/i2c/busses/i2c-wmt.c
+++ b/drivers/i2c/busses/i2c-wmt.c
@@ -432,10 +432,8 @@ static int wmt_i2c_probe(struct platform_device *pdev)
 	}
 
 	err = i2c_add_adapter(adap);
-	if (err) {
-		dev_err(&pdev->dev, "failed to add adapter\n");
+	if (err)
 		return err;
-	}
 
 	platform_set_drvdata(pdev, i2c_dev);
 
diff --git a/drivers/i2c/busses/i2c-xgene-slimpro.c b/drivers/i2c/busses/i2c-xgene-slimpro.c
index 4233f5695352..263685c7a512 100644
--- a/drivers/i2c/busses/i2c-xgene-slimpro.c
+++ b/drivers/i2c/busses/i2c-xgene-slimpro.c
@@ -418,7 +418,6 @@ static int xgene_slimpro_i2c_probe(struct platform_device *pdev)
 	i2c_set_adapdata(adapter, ctx);
 	rc = i2c_add_adapter(adapter);
 	if (rc) {
-		dev_err(&pdev->dev, "Adapter registeration failed\n");
 		mbox_free_channel(ctx->mbox_chan);
 		return rc;
 	}
diff --git a/drivers/i2c/busses/i2c-xiic.c b/drivers/i2c/busses/i2c-xiic.c
index 74f54f2f471f..66bce3b311a1 100644
--- a/drivers/i2c/busses/i2c-xiic.c
+++ b/drivers/i2c/busses/i2c-xiic.c
@@ -804,7 +804,6 @@ static int xiic_i2c_probe(struct platform_device *pdev)
 	/* add i2c adapter to i2c tree */
 	ret = i2c_add_adapter(&i2c->adap);
 	if (ret) {
-		dev_err(&pdev->dev, "Failed to add adapter\n");
 		xiic_deinit(i2c);
 		goto err_clk_dis;
 	}
diff --git a/drivers/i2c/busses/i2c-xlp9xx.c b/drivers/i2c/busses/i2c-xlp9xx.c
index 55a7bef1b2e1..2a972ed7aa0d 100644
--- a/drivers/i2c/busses/i2c-xlp9xx.c
+++ b/drivers/i2c/busses/i2c-xlp9xx.c
@@ -400,10 +400,8 @@ static int xlp9xx_i2c_probe(struct platform_device *pdev)
 	i2c_set_adapdata(&priv->adapter, priv);
 
 	err = i2c_add_adapter(&priv->adapter);
-	if (err) {
-		dev_err(&pdev->dev, "failed to add I2C adapter!\n");
+	if (err)
 		return err;
-	}
 
 	platform_set_drvdata(pdev, priv);
 	dev_dbg(&pdev->dev, "I2C bus:%d added\n", priv->adapter.nr);
diff --git a/drivers/i2c/busses/i2c-xlr.c b/drivers/i2c/busses/i2c-xlr.c
index 613c3a4f2c51..0968f59b6df5 100644
--- a/drivers/i2c/busses/i2c-xlr.c
+++ b/drivers/i2c/busses/i2c-xlr.c
@@ -432,10 +432,8 @@ static int xlr_i2c_probe(struct platform_device *pdev)
 
 	i2c_set_adapdata(&priv->adap, priv);
 	ret = i2c_add_numbered_adapter(&priv->adap);
-	if (ret < 0) {
-		dev_err(&priv->adap.dev, "Failed to add i2c bus.\n");
+	if (ret < 0)
 		return ret;
-	}
 
 	platform_set_drvdata(pdev, priv);
 	dev_info(&priv->adap.dev, "Added I2C Bus.\n");
diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c
index da3a02ef4a31..98fffa3a09f7 100644
--- a/drivers/i2c/i2c-core.c
+++ b/drivers/i2c/i2c-core.c
@@ -88,7 +88,7 @@ void i2c_transfer_trace_unreg(void)
 }
 
 #if defined(CONFIG_ACPI)
-struct acpi_i2c_handler_data {
+struct i2c_acpi_handler_data {
 	struct acpi_connection_info info;
 	struct i2c_adapter *adapter;
 };
@@ -103,15 +103,18 @@ struct gsb_buffer {
 	};
 } __packed;
 
-struct acpi_i2c_lookup {
+struct i2c_acpi_lookup {
 	struct i2c_board_info *info;
 	acpi_handle adapter_handle;
 	acpi_handle device_handle;
+	acpi_handle search_handle;
+	u32 speed;
+	u32 min_speed;
 };
 
-static int acpi_i2c_fill_info(struct acpi_resource *ares, void *data)
+static int i2c_acpi_fill_info(struct acpi_resource *ares, void *data)
 {
-	struct acpi_i2c_lookup *lookup = data;
+	struct i2c_acpi_lookup *lookup = data;
 	struct i2c_board_info *info = lookup->info;
 	struct acpi_resource_i2c_serialbus *sb;
 	acpi_status status;
@@ -130,19 +133,18 @@ static int acpi_i2c_fill_info(struct acpi_resource *ares, void *data)
 		return 1;
 
 	info->addr = sb->slave_address;
+	lookup->speed = sb->connection_speed;
 	if (sb->access_mode == ACPI_I2C_10BIT_MODE)
 		info->flags |= I2C_CLIENT_TEN;
 
 	return 1;
 }
 
-static int acpi_i2c_get_info(struct acpi_device *adev,
-			     struct i2c_board_info *info,
-			     acpi_handle *adapter_handle)
+static int i2c_acpi_do_lookup(struct acpi_device *adev,
+			      struct i2c_acpi_lookup *lookup)
 {
+	struct i2c_board_info *info = lookup->info;
 	struct list_head resource_list;
-	struct resource_entry *entry;
-	struct acpi_i2c_lookup lookup;
 	int ret;
 
 	if (acpi_bus_get_status(adev) || !adev->status.present ||
@@ -150,24 +152,58 @@ static int acpi_i2c_get_info(struct acpi_device *adev,
 		return -EINVAL;
 
 	memset(info, 0, sizeof(*info));
-	info->fwnode = acpi_fwnode_handle(adev);
-
-	memset(&lookup, 0, sizeof(lookup));
-	lookup.device_handle = acpi_device_handle(adev);
-	lookup.info = info;
+	lookup->device_handle = acpi_device_handle(adev);
 
 	/* Look up for I2cSerialBus resource */
 	INIT_LIST_HEAD(&resource_list);
 	ret = acpi_dev_get_resources(adev, &resource_list,
-				     acpi_i2c_fill_info, &lookup);
+				     i2c_acpi_fill_info, lookup);
 	acpi_dev_free_resource_list(&resource_list);
 
 	if (ret < 0 || !info->addr)
 		return -EINVAL;
 
-	*adapter_handle = lookup.adapter_handle;
+	return 0;
+}
+
+static int i2c_acpi_get_info(struct acpi_device *adev,
+			     struct i2c_board_info *info,
+			     struct i2c_adapter *adapter,
+			     acpi_handle *adapter_handle)
+{
+	struct list_head resource_list;
+	struct resource_entry *entry;
+	struct i2c_acpi_lookup lookup;
+	int ret;
+
+	memset(&lookup, 0, sizeof(lookup));
+	lookup.info = info;
+
+	ret = i2c_acpi_do_lookup(adev, &lookup);
+	if (ret)
+		return ret;
+
+	if (adapter) {
+		/* The adapter must match the one in I2cSerialBus() connector */
+		if (ACPI_HANDLE(&adapter->dev) != lookup.adapter_handle)
+			return -ENODEV;
+	} else {
+		struct acpi_device *adapter_adev;
+
+		/* The adapter must be present */
+		if (acpi_bus_get_device(lookup.adapter_handle, &adapter_adev))
+			return -ENODEV;
+		if (acpi_bus_get_status(adapter_adev) ||
+		    !adapter_adev->status.present)
+			return -ENODEV;
+	}
+
+	info->fwnode = acpi_fwnode_handle(adev);
+	if (adapter_handle)
+		*adapter_handle = lookup.adapter_handle;
 
 	/* Then fill IRQ number if any */
+	INIT_LIST_HEAD(&resource_list);
 	ret = acpi_dev_get_resources(adev, &resource_list, NULL, NULL);
 	if (ret < 0)
 		return -EINVAL;
@@ -186,7 +222,7 @@ static int acpi_i2c_get_info(struct acpi_device *adev,
 	return 0;
 }
 
-static void acpi_i2c_register_device(struct i2c_adapter *adapter,
+static void i2c_acpi_register_device(struct i2c_adapter *adapter,
 				     struct acpi_device *adev,
 				     struct i2c_board_info *info)
 {
@@ -201,39 +237,35 @@ static void acpi_i2c_register_device(struct i2c_adapter *adapter,
 	}
 }
 
-static acpi_status acpi_i2c_add_device(acpi_handle handle, u32 level,
+static acpi_status i2c_acpi_add_device(acpi_handle handle, u32 level,
 				       void *data, void **return_value)
 {
 	struct i2c_adapter *adapter = data;
 	struct acpi_device *adev;
-	acpi_handle adapter_handle;
 	struct i2c_board_info info;
 
 	if (acpi_bus_get_device(handle, &adev))
 		return AE_OK;
 
-	if (acpi_i2c_get_info(adev, &info, &adapter_handle))
+	if (i2c_acpi_get_info(adev, &info, adapter, NULL))
 		return AE_OK;
 
-	if (adapter_handle != ACPI_HANDLE(&adapter->dev))
-		return AE_OK;
-
-	acpi_i2c_register_device(adapter, adev, &info);
+	i2c_acpi_register_device(adapter, adev, &info);
 
 	return AE_OK;
 }
 
-#define ACPI_I2C_MAX_SCAN_DEPTH 32
+#define I2C_ACPI_MAX_SCAN_DEPTH 32
 
 /**
- * acpi_i2c_register_devices - enumerate I2C slave devices behind adapter
+ * i2c_acpi_register_devices - enumerate I2C slave devices behind adapter
  * @adap: pointer to adapter
  *
  * Enumerate all I2C slave devices behind this adapter by walking the ACPI
  * namespace. When a device is found it will be added to the Linux device
  * model and bound to the corresponding ACPI handle.
  */
-static void acpi_i2c_register_devices(struct i2c_adapter *adap)
+static void i2c_acpi_register_devices(struct i2c_adapter *adap)
 {
 	acpi_status status;
 
@@ -241,14 +273,72 @@ static void acpi_i2c_register_devices(struct i2c_adapter *adap)
 		return;
 
 	status = acpi_walk_namespace(ACPI_TYPE_DEVICE, ACPI_ROOT_OBJECT,
-				     ACPI_I2C_MAX_SCAN_DEPTH,
-				     acpi_i2c_add_device, NULL,
+				     I2C_ACPI_MAX_SCAN_DEPTH,
+				     i2c_acpi_add_device, NULL,
 				     adap, NULL);
 	if (ACPI_FAILURE(status))
 		dev_warn(&adap->dev, "failed to enumerate I2C slaves\n");
 }
 
-static int acpi_i2c_match_adapter(struct device *dev, void *data)
+static acpi_status i2c_acpi_lookup_speed(acpi_handle handle, u32 level,
+					   void *data, void **return_value)
+{
+	struct i2c_acpi_lookup *lookup = data;
+	struct acpi_device *adev;
+
+	if (acpi_bus_get_device(handle, &adev))
+		return AE_OK;
+
+	if (i2c_acpi_do_lookup(adev, lookup))
+		return AE_OK;
+
+	if (lookup->search_handle != lookup->adapter_handle)
+		return AE_OK;
+
+	if (lookup->speed <= lookup->min_speed)
+		lookup->min_speed = lookup->speed;
+
+	return AE_OK;
+}
+
+/**
+ * i2c_acpi_find_bus_speed - find I2C bus speed from ACPI
+ * @dev: The device owning the bus
+ *
+ * Find the I2C bus speed by walking the ACPI namespace for all I2C slaves
+ * devices connected to this bus and use the speed of slowest device.
+ *
+ * Returns the speed in Hz or zero
+ */
+u32 i2c_acpi_find_bus_speed(struct device *dev)
+{
+	struct i2c_acpi_lookup lookup;
+	struct i2c_board_info dummy;
+	acpi_status status;
+
+	if (!has_acpi_companion(dev))
+		return 0;
+
+	memset(&lookup, 0, sizeof(lookup));
+	lookup.search_handle = ACPI_HANDLE(dev);
+	lookup.min_speed = UINT_MAX;
+	lookup.info = &dummy;
+
+	status = acpi_walk_namespace(ACPI_TYPE_DEVICE, ACPI_ROOT_OBJECT,
+				     I2C_ACPI_MAX_SCAN_DEPTH,
+				     i2c_acpi_lookup_speed, NULL,
+				     &lookup, NULL);
+
+	if (ACPI_FAILURE(status)) {
+		dev_warn(dev, "unable to find I2C bus speed from ACPI\n");
+		return 0;
+	}
+
+	return lookup.min_speed != UINT_MAX ? lookup.min_speed : 0;
+}
+EXPORT_SYMBOL_GPL(i2c_acpi_find_bus_speed);
+
+static int i2c_acpi_match_adapter(struct device *dev, void *data)
 {
 	struct i2c_adapter *adapter = i2c_verify_adapter(dev);
 
@@ -258,29 +348,29 @@ static int acpi_i2c_match_adapter(struct device *dev, void *data)
 	return ACPI_HANDLE(dev) == (acpi_handle)data;
 }
 
-static int acpi_i2c_match_device(struct device *dev, void *data)
+static int i2c_acpi_match_device(struct device *dev, void *data)
 {
 	return ACPI_COMPANION(dev) == data;
 }
 
-static struct i2c_adapter *acpi_i2c_find_adapter_by_handle(acpi_handle handle)
+static struct i2c_adapter *i2c_acpi_find_adapter_by_handle(acpi_handle handle)
 {
 	struct device *dev;
 
 	dev = bus_find_device(&i2c_bus_type, NULL, handle,
-			      acpi_i2c_match_adapter);
+			      i2c_acpi_match_adapter);
 	return dev ? i2c_verify_adapter(dev) : NULL;
 }
 
-static struct i2c_client *acpi_i2c_find_client_by_adev(struct acpi_device *adev)
+static struct i2c_client *i2c_acpi_find_client_by_adev(struct acpi_device *adev)
 {
 	struct device *dev;
 
-	dev = bus_find_device(&i2c_bus_type, NULL, adev, acpi_i2c_match_device);
+	dev = bus_find_device(&i2c_bus_type, NULL, adev, i2c_acpi_match_device);
 	return dev ? i2c_verify_client(dev) : NULL;
 }
 
-static int acpi_i2c_notify(struct notifier_block *nb, unsigned long value,
+static int i2c_acpi_notify(struct notifier_block *nb, unsigned long value,
 			   void *arg)
 {
 	struct acpi_device *adev = arg;
@@ -291,20 +381,20 @@ static int acpi_i2c_notify(struct notifier_block *nb, unsigned long value,
 
 	switch (value) {
 	case ACPI_RECONFIG_DEVICE_ADD:
-		if (acpi_i2c_get_info(adev, &info, &adapter_handle))
+		if (i2c_acpi_get_info(adev, &info, NULL, &adapter_handle))
 			break;
 
-		adapter = acpi_i2c_find_adapter_by_handle(adapter_handle);
+		adapter = i2c_acpi_find_adapter_by_handle(adapter_handle);
 		if (!adapter)
 			break;
 
-		acpi_i2c_register_device(adapter, adev, &info);
+		i2c_acpi_register_device(adapter, adev, &info);
 		break;
 	case ACPI_RECONFIG_DEVICE_REMOVE:
 		if (!acpi_device_enumerated(adev))
 			break;
 
-		client = acpi_i2c_find_client_by_adev(adev);
+		client = i2c_acpi_find_client_by_adev(adev);
 		if (!client)
 			break;
 
@@ -317,10 +407,10 @@ static int acpi_i2c_notify(struct notifier_block *nb, unsigned long value,
 }
 
 static struct notifier_block i2c_acpi_notifier = {
-	.notifier_call = acpi_i2c_notify,
+	.notifier_call = i2c_acpi_notify,
 };
 #else /* CONFIG_ACPI */
-static inline void acpi_i2c_register_devices(struct i2c_adapter *adap) { }
+static inline void i2c_acpi_register_devices(struct i2c_adapter *adap) { }
 extern struct notifier_block i2c_acpi_notifier;
 #endif /* CONFIG_ACPI */
 
@@ -386,12 +476,12 @@ static int acpi_gsb_i2c_write_bytes(struct i2c_client *client,
 }
 
 static acpi_status
-acpi_i2c_space_handler(u32 function, acpi_physical_address command,
+i2c_acpi_space_handler(u32 function, acpi_physical_address command,
 			u32 bits, u64 *value64,
 			void *handler_context, void *region_context)
 {
 	struct gsb_buffer *gsb = (struct gsb_buffer *)value64;
-	struct acpi_i2c_handler_data *data = handler_context;
+	struct i2c_acpi_handler_data *data = handler_context;
 	struct acpi_connection_info *info = &data->info;
 	struct acpi_resource_i2c_serialbus *sb;
 	struct i2c_adapter *adapter = data->adapter;
@@ -510,10 +600,10 @@ acpi_i2c_space_handler(u32 function, acpi_physical_address command,
 }
 
 
-static int acpi_i2c_install_space_handler(struct i2c_adapter *adapter)
+static int i2c_acpi_install_space_handler(struct i2c_adapter *adapter)
 {
 	acpi_handle handle;
-	struct acpi_i2c_handler_data *data;
+	struct i2c_acpi_handler_data *data;
 	acpi_status status;
 
 	if (!adapter->dev.parent)
@@ -524,7 +614,7 @@ static int acpi_i2c_install_space_handler(struct i2c_adapter *adapter)
 	if (!handle)
 		return -ENODEV;
 
-	data = kzalloc(sizeof(struct acpi_i2c_handler_data),
+	data = kzalloc(sizeof(struct i2c_acpi_handler_data),
 			    GFP_KERNEL);
 	if (!data)
 		return -ENOMEM;
@@ -538,7 +628,7 @@ static int acpi_i2c_install_space_handler(struct i2c_adapter *adapter)
 
 	status = acpi_install_address_space_handler(handle,
 				ACPI_ADR_SPACE_GSBUS,
-				&acpi_i2c_space_handler,
+				&i2c_acpi_space_handler,
 				NULL,
 				data);
 	if (ACPI_FAILURE(status)) {
@@ -552,10 +642,10 @@ static int acpi_i2c_install_space_handler(struct i2c_adapter *adapter)
 	return 0;
 }
 
-static void acpi_i2c_remove_space_handler(struct i2c_adapter *adapter)
+static void i2c_acpi_remove_space_handler(struct i2c_adapter *adapter)
 {
 	acpi_handle handle;
-	struct acpi_i2c_handler_data *data;
+	struct i2c_acpi_handler_data *data;
 	acpi_status status;
 
 	if (!adapter->dev.parent)
@@ -568,7 +658,7 @@ static void acpi_i2c_remove_space_handler(struct i2c_adapter *adapter)
 
 	acpi_remove_address_space_handler(handle,
 				ACPI_ADR_SPACE_GSBUS,
-				&acpi_i2c_space_handler);
+				&i2c_acpi_space_handler);
 
 	status = acpi_bus_get_private_data(handle, (void **)&data);
 	if (ACPI_SUCCESS(status))
@@ -577,10 +667,10 @@ static void acpi_i2c_remove_space_handler(struct i2c_adapter *adapter)
 	acpi_bus_detach_private_data(handle);
 }
 #else /* CONFIG_ACPI_I2C_OPREGION */
-static inline void acpi_i2c_remove_space_handler(struct i2c_adapter *adapter)
+static inline void i2c_acpi_remove_space_handler(struct i2c_adapter *adapter)
 { }
 
-static inline int acpi_i2c_install_space_handler(struct i2c_adapter *adapter)
+static inline int i2c_acpi_install_space_handler(struct i2c_adapter *adapter)
 { return 0; }
 #endif /* CONFIG_ACPI_I2C_OPREGION */
 
@@ -853,7 +943,7 @@ static int i2c_device_probe(struct device *dev)
 			status = 0;
 
 		if (status)
-			dev_warn(&client->dev, "failed to set up wakeup irq");
+			dev_warn(&client->dev, "failed to set up wakeup irq\n");
 	}
 
 	dev_dbg(dev, "probe\n");
@@ -1208,8 +1298,9 @@ i2c_new_device(struct i2c_adapter *adap, struct i2c_board_info const *info)
 	return client;
 
 out_err:
-	dev_err(&adap->dev, "Failed to register i2c client %s at 0x%02x "
-		"(%d)\n", client->name, client->addr, status);
+	dev_err(&adap->dev,
+		"Failed to register i2c client %s at 0x%02x (%d)\n",
+		client->name, client->addr, status);
 out_err_silent:
 	kfree(client);
 	return NULL;
@@ -1335,21 +1426,19 @@ static void i2c_adapter_dev_release(struct device *dev)
 	complete(&adap->dev_released);
 }
 
-/*
- * This function is only needed for mutex_lock_nested, so it is never
- * called unless locking correctness checking is enabled. Thus we
- * make it inline to avoid a compiler warning. That's what gcc ends up
- * doing anyway.
- */
-static inline unsigned int i2c_adapter_depth(struct i2c_adapter *adapter)
+unsigned int i2c_adapter_depth(struct i2c_adapter *adapter)
 {
 	unsigned int depth = 0;
 
 	while ((adapter = i2c_parent_is_i2c_adapter(adapter)))
 		depth++;
 
+	WARN_ONCE(depth >= MAX_LOCKDEP_SUBCLASSES,
+		  "adapter depth exceeds lockdep subclass limit\n");
+
 	return depth;
 }
+EXPORT_SYMBOL_GPL(i2c_adapter_depth);
 
 /*
  * Let users instantiate I2C devices through sysfs. This can be used when
@@ -1678,8 +1767,8 @@ static int i2c_do_add_adapter(struct i2c_driver *driver,
 	if (driver->attach_adapter) {
 		dev_warn(&adap->dev, "%s: attach_adapter method is deprecated\n",
 			 driver->driver.name);
-		dev_warn(&adap->dev, "Please use another way to instantiate "
-			 "your i2c_client\n");
+		dev_warn(&adap->dev,
+			 "Please use another way to instantiate your i2c_client\n");
 		/* We ignore the return code; if it fails, too bad */
 		driver->attach_adapter(adap);
 	}
@@ -1691,6 +1780,12 @@ static int __process_new_adapter(struct device_driver *d, void *data)
 	return i2c_do_add_adapter(to_i2c_driver(d), data);
 }
 
+static const struct i2c_lock_operations i2c_adapter_lock_ops = {
+	.lock_bus =    i2c_adapter_lock_bus,
+	.trylock_bus = i2c_adapter_trylock_bus,
+	.unlock_bus =  i2c_adapter_unlock_bus,
+};
+
 static int i2c_register_adapter(struct i2c_adapter *adap)
 {
 	int res = -EINVAL;
@@ -1710,11 +1805,8 @@ static int i2c_register_adapter(struct i2c_adapter *adap)
 		goto out_list;
 	}
 
-	if (!adap->lock_bus) {
-		adap->lock_bus = i2c_adapter_lock_bus;
-		adap->trylock_bus = i2c_adapter_trylock_bus;
-		adap->unlock_bus = i2c_adapter_unlock_bus;
-	}
+	if (!adap->lock_ops)
+		adap->lock_ops = &i2c_adapter_lock_ops;
 
 	rt_mutex_init(&adap->bus_lock);
 	rt_mutex_init(&adap->mux_lock);
@@ -1752,8 +1844,8 @@ static int i2c_register_adapter(struct i2c_adapter *adap)
 
 	/* create pre-declared device nodes */
 	of_i2c_register_devices(adap);
-	acpi_i2c_register_devices(adap);
-	acpi_i2c_install_space_handler(adap);
+	i2c_acpi_register_devices(adap);
+	i2c_acpi_install_space_handler(adap);
 
 	if (adap->nr < __i2c_first_dynamic_bus_num)
 		i2c_scan_static_board_info(adap);
@@ -1925,7 +2017,7 @@ void i2c_del_adapter(struct i2c_adapter *adap)
 		return;
 	}
 
-	acpi_i2c_remove_space_handler(adap);
+	i2c_acpi_remove_space_handler(adap);
 	/* Tell drivers about this removal */
 	mutex_lock(&core_lock);
 	bus_for_each_drv(&i2c_bus_type, NULL, adap,
@@ -2451,15 +2543,16 @@ int i2c_transfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
 	if (adap->algo->master_xfer) {
 #ifdef DEBUG
 		for (ret = 0; ret < num; ret++) {
-			dev_dbg(&adap->dev, "master_xfer[%d] %c, addr=0x%02x, "
-				"len=%d%s\n", ret, (msgs[ret].flags & I2C_M_RD)
-				? 'R' : 'W', msgs[ret].addr, msgs[ret].len,
+			dev_dbg(&adap->dev,
+				"master_xfer[%d] %c, addr=0x%02x, len=%d%s\n",
+				ret, (msgs[ret].flags & I2C_M_RD) ? 'R' : 'W',
+				msgs[ret].addr, msgs[ret].len,
 				(msgs[ret].flags & I2C_M_RECV_LEN) ? "+" : "");
 		}
 #endif
 
 		if (in_atomic() || irqs_disabled()) {
-			ret = adap->trylock_bus(adap, I2C_LOCK_SEGMENT);
+			ret = i2c_trylock_bus(adap, I2C_LOCK_SEGMENT);
 			if (!ret)
 				/* I2C activity is ongoing. */
 				return -EAGAIN;
@@ -2619,9 +2712,9 @@ static int i2c_detect_address(struct i2c_client *temp_client,
 
 	/* Consistency check */
 	if (info.type[0] == '\0') {
-		dev_err(&adapter->dev, "%s detection function provided "
-			"no name for 0x%x\n", driver->driver.name,
-			addr);
+		dev_err(&adapter->dev,
+			"%s detection function provided no name for 0x%x\n",
+			driver->driver.name, addr);
 	} else {
 		struct i2c_client *client;
 
@@ -2659,9 +2752,8 @@ static int i2c_detect(struct i2c_adapter *adapter, struct i2c_driver *driver)
 	/* Warn that the adapter lost class based instantiation */
 	if (adapter->class == I2C_CLASS_DEPRECATED) {
 		dev_dbg(&adapter->dev,
-			"This adapter dropped support for I2C classes and "
-			"won't auto-detect %s devices anymore. If you need it, check "
-			"'Documentation/i2c/instantiating-devices' for alternatives.\n",
+			"This adapter dropped support for I2C classes and won't auto-detect %s devices anymore. "
+			"If you need it, check 'Documentation/i2c/instantiating-devices' for alternatives.\n",
 			driver->driver.name);
 		return 0;
 	}
@@ -2677,8 +2769,9 @@ static int i2c_detect(struct i2c_adapter *adapter, struct i2c_driver *driver)
 	temp_client->adapter = adapter;
 
 	for (i = 0; address_list[i] != I2C_CLIENT_END; i += 1) {
-		dev_dbg(&adapter->dev, "found normal entry for adapter %d, "
-			"addr 0x%02x\n", adap_id, address_list[i]);
+		dev_dbg(&adapter->dev,
+			"found normal entry for adapter %d, addr 0x%02x\n",
+			adap_id, address_list[i]);
 		temp_client->addr = address_list[i];
 		err = i2c_detect_address(temp_client, driver);
 		if (unlikely(err))
@@ -2710,15 +2803,16 @@ i2c_new_probed_device(struct i2c_adapter *adap,
 	for (i = 0; addr_list[i] != I2C_CLIENT_END; i++) {
 		/* Check address validity */
 		if (i2c_check_7bit_addr_validity_strict(addr_list[i]) < 0) {
-			dev_warn(&adap->dev, "Invalid 7-bit address "
-				 "0x%02x\n", addr_list[i]);
+			dev_warn(&adap->dev, "Invalid 7-bit address 0x%02x\n",
+				 addr_list[i]);
 			continue;
 		}
 
 		/* Check address availability (7 bit, no need to encode flags) */
 		if (i2c_check_addr_busy(adap, addr_list[i])) {
-			dev_dbg(&adap->dev, "Address 0x%02x already in "
-				"use, not probing\n", addr_list[i]);
+			dev_dbg(&adap->dev,
+				"Address 0x%02x already in use, not probing\n",
+				addr_list[i]);
 			continue;
 		}
 
diff --git a/drivers/i2c/i2c-mux.c b/drivers/i2c/i2c-mux.c
index 8eee98634cda..83768e85a919 100644
--- a/drivers/i2c/i2c-mux.c
+++ b/drivers/i2c/i2c-mux.c
@@ -159,7 +159,7 @@ static int i2c_mux_trylock_bus(struct i2c_adapter *adapter, unsigned int flags)
 		return 0;	/* mux_lock not locked, failure */
 	if (!(flags & I2C_LOCK_ROOT_ADAPTER))
 		return 1;	/* we only want mux_lock, success */
-	if (parent->trylock_bus(parent, flags))
+	if (i2c_trylock_bus(parent, flags))
 		return 1;	/* parent locked too, success */
 	rt_mutex_unlock(&parent->mux_lock);
 	return 0;		/* parent not locked, failure */
@@ -193,7 +193,7 @@ static int i2c_parent_trylock_bus(struct i2c_adapter *adapter,
 
 	if (!rt_mutex_trylock(&parent->mux_lock))
 		return 0;	/* mux_lock not locked, failure */
-	if (parent->trylock_bus(parent, flags))
+	if (i2c_trylock_bus(parent, flags))
 		return 1;	/* parent locked too, success */
 	rt_mutex_unlock(&parent->mux_lock);
 	return 0;		/* parent not locked, failure */
@@ -255,6 +255,10 @@ struct i2c_mux_core *i2c_mux_alloc(struct i2c_adapter *parent,
 	muxc->dev = dev;
 	if (flags & I2C_MUX_LOCKED)
 		muxc->mux_locked = true;
+	if (flags & I2C_MUX_ARBITRATOR)
+		muxc->arbitrator = true;
+	if (flags & I2C_MUX_GATE)
+		muxc->gate = true;
 	muxc->select = select;
 	muxc->deselect = deselect;
 	muxc->max_adapters = max_adapters;
@@ -263,6 +267,18 @@ struct i2c_mux_core *i2c_mux_alloc(struct i2c_adapter *parent,
 }
 EXPORT_SYMBOL_GPL(i2c_mux_alloc);
 
+static const struct i2c_lock_operations i2c_mux_lock_ops = {
+	.lock_bus =    i2c_mux_lock_bus,
+	.trylock_bus = i2c_mux_trylock_bus,
+	.unlock_bus =  i2c_mux_unlock_bus,
+};
+
+static const struct i2c_lock_operations i2c_parent_lock_ops = {
+	.lock_bus =    i2c_parent_lock_bus,
+	.trylock_bus = i2c_parent_trylock_bus,
+	.unlock_bus =  i2c_parent_unlock_bus,
+};
+
 int i2c_mux_add_adapter(struct i2c_mux_core *muxc,
 			u32 force_nr, u32 chan_id,
 			unsigned int class)
@@ -312,15 +328,10 @@ int i2c_mux_add_adapter(struct i2c_mux_core *muxc,
 	priv->adap.retries = parent->retries;
 	priv->adap.timeout = parent->timeout;
 	priv->adap.quirks = parent->quirks;
-	if (muxc->mux_locked) {
-		priv->adap.lock_bus = i2c_mux_lock_bus;
-		priv->adap.trylock_bus = i2c_mux_trylock_bus;
-		priv->adap.unlock_bus = i2c_mux_unlock_bus;
-	} else {
-		priv->adap.lock_bus = i2c_parent_lock_bus;
-		priv->adap.trylock_bus = i2c_parent_trylock_bus;
-		priv->adap.unlock_bus = i2c_parent_unlock_bus;
-	}
+	if (muxc->mux_locked)
+		priv->adap.lock_ops = &i2c_mux_lock_ops;
+	else
+		priv->adap.lock_ops = &i2c_parent_lock_ops;
 
 	/* Sanity check on class */
 	if (i2c_mux_parent_classes(parent) & class)
@@ -335,18 +346,42 @@ int i2c_mux_add_adapter(struct i2c_mux_core *muxc,
 	 * nothing if !CONFIG_OF.
 	 */
 	if (muxc->dev->of_node) {
-		struct device_node *child;
+		struct device_node *dev_node = muxc->dev->of_node;
+		struct device_node *mux_node, *child = NULL;
 		u32 reg;
 
-		for_each_child_of_node(muxc->dev->of_node, child) {
-			ret = of_property_read_u32(child, "reg", &reg);
-			if (ret)
-				continue;
-			if (chan_id == reg) {
-				priv->adap.dev.of_node = child;
-				break;
+		if (muxc->arbitrator)
+			mux_node = of_get_child_by_name(dev_node, "i2c-arb");
+		else if (muxc->gate)
+			mux_node = of_get_child_by_name(dev_node, "i2c-gate");
+		else
+			mux_node = of_get_child_by_name(dev_node, "i2c-mux");
+
+		if (mux_node) {
+			/* A "reg" property indicates an old-style DT entry */
+			if (!of_property_read_u32(mux_node, "reg", &reg)) {
+				of_node_put(mux_node);
+				mux_node = NULL;
+			}
+		}
+
+		if (!mux_node)
+			mux_node = of_node_get(dev_node);
+		else if (muxc->arbitrator || muxc->gate)
+			child = of_node_get(mux_node);
+
+		if (!child) {
+			for_each_child_of_node(mux_node, child) {
+				ret = of_property_read_u32(child, "reg", &reg);
+				if (ret)
+					continue;
+				if (chan_id == reg)
+					break;
 			}
 		}
+
+		priv->adap.dev.of_node = child;
+		of_node_put(mux_node);
 	}
 
 	/*
diff --git a/drivers/i2c/muxes/i2c-arb-gpio-challenge.c b/drivers/i2c/muxes/i2c-arb-gpio-challenge.c
index a90bbc4037dd..86fc2d4c081b 100644
--- a/drivers/i2c/muxes/i2c-arb-gpio-challenge.c
+++ b/drivers/i2c/muxes/i2c-arb-gpio-challenge.c
@@ -130,7 +130,7 @@ static int i2c_arbitrator_probe(struct platform_device *pdev)
 		return -EINVAL;
 	}
 
-	muxc = i2c_mux_alloc(NULL, dev, 1, sizeof(*arb), 0,
+	muxc = i2c_mux_alloc(NULL, dev, 1, sizeof(*arb), I2C_MUX_ARBITRATOR,
 			     i2c_arbitrator_select, i2c_arbitrator_deselect);
 	if (!muxc)
 		return -ENOMEM;
diff --git a/drivers/i2c/muxes/i2c-mux-pca9541.c b/drivers/i2c/muxes/i2c-mux-pca9541.c
index 3cb8af635db5..4ea7e691afc7 100644
--- a/drivers/i2c/muxes/i2c-mux-pca9541.c
+++ b/drivers/i2c/muxes/i2c-mux-pca9541.c
@@ -85,6 +85,13 @@ static const struct i2c_device_id pca9541_id[] = {
 
 MODULE_DEVICE_TABLE(i2c, pca9541_id);
 
+#ifdef CONFIG_OF
+static const struct of_device_id pca9541_of_match[] = {
+	{ .compatible = "nxp,pca9541" },
+	{}
+};
+#endif
+
 /*
  * Write to chip register. Don't use i2c_transfer()/i2c_smbus_xfer()
  * as they will try to lock the adapter a second time.
@@ -349,7 +356,8 @@ static int pca9541_probe(struct i2c_client *client,
 	force = 0;
 	if (pdata)
 		force = pdata->modes[0].adap_id;
-	muxc = i2c_mux_alloc(adap, &client->dev, 1, sizeof(*data), 0,
+	muxc = i2c_mux_alloc(adap, &client->dev, 1, sizeof(*data),
+			     I2C_MUX_ARBITRATOR,
 			     pca9541_select_chan, pca9541_release_chan);
 	if (!muxc)
 		return -ENOMEM;
@@ -382,6 +390,7 @@ static int pca9541_remove(struct i2c_client *client)
 static struct i2c_driver pca9541_driver = {
 	.driver = {
 		   .name = "pca9541",
+		   .of_match_table = of_match_ptr(pca9541_of_match),
 		   },
 	.probe = pca9541_probe,
 	.remove = pca9541_remove,
diff --git a/drivers/i2c/muxes/i2c-mux-pca954x.c b/drivers/i2c/muxes/i2c-mux-pca954x.c
index 3278ebf1cc5c..1091346f2480 100644
--- a/drivers/i2c/muxes/i2c-mux-pca954x.c
+++ b/drivers/i2c/muxes/i2c-mux-pca954x.c
@@ -42,6 +42,7 @@
 #include <linux/i2c/pca954x.h>
 #include <linux/module.h>
 #include <linux/of.h>
+#include <linux/of_device.h>
 #include <linux/pm.h>
 #include <linux/slab.h>
 
@@ -58,14 +59,6 @@ enum pca_type {
 	pca_9548,
 };
 
-struct pca954x {
-	enum pca_type type;
-
-	u8 last_chan;		/* last register value */
-	u8 deselect;
-	struct i2c_client *client;
-};
-
 struct chip_desc {
 	u8 nchans;
 	u8 enable;	/* used for muxes only */
@@ -75,6 +68,14 @@ struct chip_desc {
 	} muxtype;
 };
 
+struct pca954x {
+	const struct chip_desc *chip;
+
+	u8 last_chan;		/* last register value */
+	u8 deselect;
+	struct i2c_client *client;
+};
+
 /* Provide specs for the PCA954x types we know about */
 static const struct chip_desc chips[] = {
 	[pca_9540] = {
@@ -119,6 +120,20 @@ static const struct i2c_device_id pca954x_id[] = {
 };
 MODULE_DEVICE_TABLE(i2c, pca954x_id);
 
+#ifdef CONFIG_OF
+static const struct of_device_id pca954x_of_match[] = {
+	{ .compatible = "nxp,pca9540", .data = &chips[pca_9540] },
+	{ .compatible = "nxp,pca9542", .data = &chips[pca_9542] },
+	{ .compatible = "nxp,pca9543", .data = &chips[pca_9543] },
+	{ .compatible = "nxp,pca9544", .data = &chips[pca_9544] },
+	{ .compatible = "nxp,pca9545", .data = &chips[pca_9545] },
+	{ .compatible = "nxp,pca9546", .data = &chips[pca_9546] },
+	{ .compatible = "nxp,pca9547", .data = &chips[pca_9547] },
+	{ .compatible = "nxp,pca9548", .data = &chips[pca_9548] },
+	{}
+};
+#endif
+
 /* Write to mux register. Don't use i2c_transfer()/i2c_smbus_xfer()
    for this as they will try to lock adapter a second time */
 static int pca954x_reg_write(struct i2c_adapter *adap,
@@ -151,7 +166,7 @@ static int pca954x_select_chan(struct i2c_mux_core *muxc, u32 chan)
 {
 	struct pca954x *data = i2c_mux_priv(muxc);
 	struct i2c_client *client = data->client;
-	const struct chip_desc *chip = &chips[data->type];
+	const struct chip_desc *chip = data->chip;
 	u8 regval;
 	int ret = 0;
 
@@ -197,6 +212,7 @@ static int pca954x_probe(struct i2c_client *client,
 	int num, force, class;
 	struct i2c_mux_core *muxc;
 	struct pca954x *data;
+	const struct of_device_id *match;
 	int ret;
 
 	if (!i2c_check_functionality(adap, I2C_FUNC_SMBUS_BYTE))
@@ -226,14 +242,19 @@ static int pca954x_probe(struct i2c_client *client,
 		return -ENODEV;
 	}
 
-	data->type = id->driver_data;
+	match = of_match_device(of_match_ptr(pca954x_of_match), &client->dev);
+	if (match)
+		data->chip = of_device_get_match_data(&client->dev);
+	else
+		data->chip = &chips[id->driver_data];
+
 	data->last_chan = 0;		   /* force the first selection */
 
 	idle_disconnect_dt = of_node &&
 		of_property_read_bool(of_node, "i2c-mux-idle-disconnect");
 
 	/* Now create an adapter for each channel */
-	for (num = 0; num < chips[data->type].nchans; num++) {
+	for (num = 0; num < data->chip->nchans; num++) {
 		bool idle_disconnect_pd = false;
 
 		force = 0;			  /* dynamic adap number */
@@ -263,7 +284,7 @@ static int pca954x_probe(struct i2c_client *client,
 
 	dev_info(&client->dev,
 		 "registered %d multiplexed busses for I2C %s %s\n",
-		 num, chips[data->type].muxtype == pca954x_ismux
+		 num, data->chip->muxtype == pca954x_ismux
 				? "mux" : "switch", client->name);
 
 	return 0;
@@ -299,6 +320,7 @@ static struct i2c_driver pca954x_driver = {
 	.driver		= {
 		.name	= "pca954x",
 		.pm	= &pca954x_pm,
+		.of_match_table = of_match_ptr(pca954x_of_match),
 	},
 	.probe		= pca954x_probe,
 	.remove		= pca954x_remove,