i2c: designware: Convert to use struct i2c_timings

Instead of using custom variables and parser, convert the driver to use
the ones provided by I2C core.

No functional change intended.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Tested-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>

3 files changed, 33 insertions, 34 deletions

diff --git a/drivers/i2c/busses/i2c-designware-core.h b/drivers/i2c/busses/i2c-designware-core.h
index 29b92f05bb2b..cdba58a3e359 100644
--- a/drivers/i2c/busses/i2c-designware-core.h
+++ b/drivers/i2c/busses/i2c-designware-core.h
@@ -212,7 +212,8 @@
  * @tx_fifo_depth: depth of the hardware tx fifo
  * @rx_fifo_depth: depth of the hardware rx fifo
  * @rx_outstanding: current master-rx elements in tx fifo
- * @clk_freq: bus clock frequency
+ * @timings: bus clock frequency, SDA hold and other timings
+ * @sda_hold_time: SDA hold value
  * @ss_hcnt: standard speed HCNT value
  * @ss_lcnt: standard speed LCNT value
  * @fs_hcnt: fast speed HCNT value
@@ -264,10 +265,8 @@ struct dw_i2c_dev {
 	unsigned int		tx_fifo_depth;
 	unsigned int		rx_fifo_depth;
 	int			rx_outstanding;
-	u32			clk_freq;
+	struct i2c_timings	timings;
 	u32			sda_hold_time;
-	u32			sda_falling_time;
-	u32			scl_falling_time;
 	u16			ss_hcnt;
 	u16			ss_lcnt;
 	u16			fs_hcnt;
diff --git a/drivers/i2c/busses/i2c-designware-master.c b/drivers/i2c/busses/i2c-designware-master.c
index a1717bff06a8..c69b8348cf4c 100644
--- a/drivers/i2c/busses/i2c-designware-master.c
+++ b/drivers/i2c/busses/i2c-designware-master.c
@@ -51,6 +51,7 @@ static int i2c_dw_set_timings_master(struct dw_i2c_dev *dev)
 	const char *mode_str, *fp_str = "";
 	u32 comp_param1;
 	u32 sda_falling_time, scl_falling_time;
+	struct i2c_timings *t = &dev->timings;
 	int ret;
 
 	ret = i2c_dw_acquire_lock(dev);
@@ -60,8 +61,8 @@ static int i2c_dw_set_timings_master(struct dw_i2c_dev *dev)
 	i2c_dw_release_lock(dev);
 
 	/* Set standard and fast speed dividers for high/low periods */
-	sda_falling_time = dev->sda_falling_time ?: 300; /* ns */
-	scl_falling_time = dev->scl_falling_time ?: 300; /* ns */
+	sda_falling_time = t->sda_fall_ns ?: 300; /* ns */
+	scl_falling_time = t->scl_fall_ns ?: 300; /* ns */
 
 	/* Calculate SCL timing parameters for standard mode if not set */
 	if (!dev->ss_hcnt || !dev->ss_lcnt) {
@@ -85,7 +86,7 @@ static int i2c_dw_set_timings_master(struct dw_i2c_dev *dev)
 	 * difference is the timing parameter values since the registers are
 	 * the same.
 	 */
-	if (dev->clk_freq == 1000000) {
+	if (t->bus_freq_hz == 1000000) {
 		/*
 		 * Check are fast mode plus parameters available and use
 		 * fast mode if not.
diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c
index 5660daf6c92e..fc1462601b16 100644
--- a/drivers/i2c/busses/i2c-designware-platdrv.c
+++ b/drivers/i2c/busses/i2c-designware-platdrv.c
@@ -96,6 +96,7 @@ static void dw_i2c_acpi_params(struct platform_device *pdev, char method[],
 static int dw_i2c_acpi_configure(struct platform_device *pdev)
 {
 	struct dw_i2c_dev *dev = platform_get_drvdata(pdev);
+	struct i2c_timings *t = &dev->timings;
 	u32 ss_ht = 0, fp_ht = 0, hs_ht = 0, fs_ht = 0;
 	acpi_handle handle = ACPI_HANDLE(&pdev->dev);
 	const struct acpi_device_id *id;
@@ -115,7 +116,7 @@ static int dw_i2c_acpi_configure(struct platform_device *pdev)
 	dw_i2c_acpi_params(pdev, "HSCN", &dev->hs_hcnt, &dev->hs_lcnt, &hs_ht);
 	dw_i2c_acpi_params(pdev, "FMCN", &dev->fs_hcnt, &dev->fs_lcnt, &fs_ht);
 
-	switch (dev->clk_freq) {
+	switch (t->bus_freq_hz) {
 	case 100000:
 		dev->sda_hold_time = ss_ht;
 		break;
@@ -175,6 +176,8 @@ static inline int dw_i2c_acpi_configure(struct platform_device *pdev)
 
 static void i2c_dw_configure_master(struct dw_i2c_dev *dev)
 {
+	struct i2c_timings *t = &dev->timings;
+
 	dev->functionality = I2C_FUNC_10BIT_ADDR | DW_IC_DEFAULT_FUNCTIONALITY;
 
 	dev->master_cfg = DW_IC_CON_MASTER | DW_IC_CON_SLAVE_DISABLE |
@@ -182,7 +185,7 @@ static void i2c_dw_configure_master(struct dw_i2c_dev *dev)
 
 	dev->mode = DW_IC_MASTER;
 
-	switch (dev->clk_freq) {
+	switch (t->bus_freq_hz) {
 	case 100000:
 		dev->master_cfg |= DW_IC_CON_SPEED_STD;
 		break;
@@ -240,7 +243,8 @@ static int dw_i2c_plat_probe(struct platform_device *pdev)
 	struct dw_i2c_platform_data *pdata = dev_get_platdata(&pdev->dev);
 	struct i2c_adapter *adap;
 	struct dw_i2c_dev *dev;
-	u32 acpi_speed, ht = 0;
+	struct i2c_timings *t;
+	u32 acpi_speed;
 	struct resource *mem;
 	int i, irq, ret;
 	static const int supported_speeds[] = {
@@ -272,18 +276,11 @@ static int dw_i2c_plat_probe(struct platform_device *pdev)
 		reset_control_deassert(dev->rst);
 	}
 
-	if (pdata) {
-		dev->clk_freq = pdata->i2c_scl_freq;
-	} else {
-		device_property_read_u32(&pdev->dev, "i2c-sda-hold-time-ns",
-					 &ht);
-		device_property_read_u32(&pdev->dev, "i2c-sda-falling-time-ns",
-					 &dev->sda_falling_time);
-		device_property_read_u32(&pdev->dev, "i2c-scl-falling-time-ns",
-					 &dev->scl_falling_time);
-		device_property_read_u32(&pdev->dev, "clock-frequency",
-					 &dev->clk_freq);
-	}
+	t = &dev->timings;
+	if (pdata)
+		t->bus_freq_hz = pdata->i2c_scl_freq;
+	else
+		i2c_parse_fw_timings(&pdev->dev, t, false);
 
 	acpi_speed = i2c_acpi_find_bus_speed(&pdev->dev);
 	/*
@@ -300,12 +297,12 @@ static int dw_i2c_plat_probe(struct platform_device *pdev)
 	 * Find bus speed from the "clock-frequency" device property, ACPI
 	 * or by using fast mode if neither is set.
 	 */
-	if (acpi_speed && dev->clk_freq)
-		dev->clk_freq = min(dev->clk_freq, acpi_speed);
-	else if (acpi_speed || dev->clk_freq)
-		dev->clk_freq = max(dev->clk_freq, acpi_speed);
+	if (acpi_speed && t->bus_freq_hz)
+		t->bus_freq_hz = min(t->bus_freq_hz, acpi_speed);
+	else if (acpi_speed || t->bus_freq_hz)
+		t->bus_freq_hz = max(t->bus_freq_hz, acpi_speed);
 	else
-		dev->clk_freq = 400000;
+		t->bus_freq_hz = 400000;
 
 	if (has_acpi_companion(&pdev->dev))
 		dw_i2c_acpi_configure(pdev);
@@ -314,11 +311,11 @@ static int dw_i2c_plat_probe(struct platform_device *pdev)
 	 * Only standard mode at 100kHz, fast mode at 400kHz,
 	 * fast mode plus at 1MHz and high speed mode at 3.4MHz are supported.
 	 */
-	if (dev->clk_freq != 100000 && dev->clk_freq != 400000
-	    && dev->clk_freq != 1000000 && dev->clk_freq != 3400000) {
+	if (t->bus_freq_hz != 100000 && t->bus_freq_hz != 400000 &&
+	    t->bus_freq_hz != 1000000 && t->bus_freq_hz != 3400000) {
 		dev_err(&pdev->dev,
 			"%d Hz is unsupported, only 100kHz, 400kHz, 1MHz and 3.4MHz are supported\n",
-			dev->clk_freq);
+			t->bus_freq_hz);
 		ret = -EINVAL;
 		goto exit_reset;
 	}
@@ -334,12 +331,14 @@ static int dw_i2c_plat_probe(struct platform_device *pdev)
 
 	dev->clk = devm_clk_get(&pdev->dev, NULL);
 	if (!i2c_dw_prepare_clk(dev, true)) {
+		u64 clk_khz;
+
 		dev->get_clk_rate_khz = i2c_dw_get_clk_rate_khz;
+		clk_khz = dev->get_clk_rate_khz(dev);
 
-		if (!dev->sda_hold_time && ht)
-			dev->sda_hold_time = div_u64(
-				(u64)dev->get_clk_rate_khz(dev) * ht + 500000,
-				1000000);
+		if (!dev->sda_hold_time && t->sda_hold_ns)
+			dev->sda_hold_time =
+				div_u64(clk_khz * t->sda_hold_ns + 500000, 1000000);
 	}
 
 	dw_i2c_set_fifo_size(dev, pdev->id);