drm/nouveau/clock: pull in the implementation from all over the place

Still missing the main bits we use to change performance levels, I'll get
to it after all the hard yakka has been finished.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

1 files changed, 7 insertions, 512 deletions

diff --git a/drivers/gpu/drm/nouveau/nouveau_bios.c b/drivers/gpu/drm/nouveau/nouveau_bios.c
index 35b0a8f9c008..98eaac9da30e 100644
--- a/drivers/gpu/drm/nouveau/nouveau_bios.c
+++ b/drivers/gpu/drm/nouveau/nouveau_bios.c
@@ -441,70 +441,6 @@ io_condition_met(struct nvbios *bios, uint16_t offset, uint8_t cond)
 	return (data == cmpval);
 }
 
-static int
-nv50_pll_set(struct drm_device *dev, uint32_t reg, uint32_t clk)
-{
-	struct drm_nouveau_private *dev_priv = dev->dev_private;
-	struct nouveau_pll_vals pll;
-	struct pll_lims pll_limits;
-	u32 ctrl, mask, coef;
-	int ret;
-
-	ret = get_pll_limits(dev, reg, &pll_limits);
-	if (ret)
-		return ret;
-
-	clk = nouveau_calc_pll_mnp(dev, &pll_limits, clk, &pll);
-	if (!clk)
-		return -ERANGE;
-
-	coef = pll.N1 << 8 | pll.M1;
-	ctrl = pll.log2P << 16;
-	mask = 0x00070000;
-	if (reg == 0x004008) {
-		mask |= 0x01f80000;
-		ctrl |= (pll_limits.log2p_bias << 19);
-		ctrl |= (pll.log2P << 22);
-	}
-
-	if (!dev_priv->vbios.execute)
-		return 0;
-
-	nv_mask(dev, reg + 0, mask, ctrl);
-	nv_wr32(dev, reg + 4, coef);
-	return 0;
-}
-
-static int
-setPLL(struct nvbios *bios, uint32_t reg, uint32_t clk)
-{
-	struct drm_device *dev = bios->dev;
-	struct drm_nouveau_private *dev_priv = dev->dev_private;
-	/* clk in kHz */
-	struct pll_lims pll_lim;
-	struct nouveau_pll_vals pllvals;
-	int ret;
-
-	if (dev_priv->card_type >= NV_50)
-		return nv50_pll_set(dev, reg, clk);
-
-	/* high regs (such as in the mac g5 table) are not -= 4 */
-	ret = get_pll_limits(dev, reg > 0x405c ? reg : reg - 4, &pll_lim);
-	if (ret)
-		return ret;
-
-	clk = nouveau_calc_pll_mnp(dev, &pll_lim, clk, &pllvals);
-	if (!clk)
-		return -ERANGE;
-
-	if (bios->execute) {
-		still_alive();
-		nouveau_hw_setpll(dev, reg, &pllvals);
-	}
-
-	return 0;
-}
-
 static int dcb_entry_idx_from_crtchead(struct drm_device *dev)
 {
 	struct drm_nouveau_private *dev_priv = dev->dev_private;
@@ -752,7 +688,7 @@ init_io_restrict_pll(struct nvbios *bios, uint16_t offset,
 	BIOSLOG(bios, "0x%04X: Reg: 0x%08X, Config: 0x%02X, Freq: %d0kHz\n",
 		offset, reg, config, freq);
 
-	setPLL(bios, reg, freq * 10);
+	setPLL(bios->dev, reg, freq * 10);
 
 	return len;
 }
@@ -1110,7 +1046,7 @@ init_io_restrict_pll2(struct nvbios *bios, uint16_t offset,
 	BIOSLOG(bios, "0x%04X: Reg: 0x%08X, Config: 0x%02X, Freq: %dkHz\n",
 		offset, reg, config, freq);
 
-	setPLL(bios, reg, freq);
+	setPLL(bios->dev, reg, freq);
 
 	return len;
 }
@@ -1137,7 +1073,7 @@ init_pll2(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
 	BIOSLOG(bios, "0x%04X: Reg: 0x%04X, Freq: %dkHz\n",
 		offset, reg, freq);
 
-	setPLL(bios, reg, freq);
+	setPLL(bios->dev, reg, freq);
 	return 9;
 }
 
@@ -2376,12 +2312,12 @@ init_configure_clk(struct nvbios *bios, uint16_t offset,
 		return 0;
 
 	clock = ROM16(bios->data[meminitoffs + 4]) * 10;
-	setPLL(bios, NV_PRAMDAC_NVPLL_COEFF, clock);
+	setPLL(bios->dev, NV_PRAMDAC_NVPLL_COEFF, clock);
 
 	clock = ROM16(bios->data[meminitoffs + 2]) * 10;
 	if (bios->data[meminitoffs] & 1) /* DDR */
 		clock *= 2;
-	setPLL(bios, NV_PRAMDAC_MPLL_COEFF, clock);
+	setPLL(bios->dev, NV_PRAMDAC_MPLL_COEFF, clock);
 
 	return 1;
 }
@@ -2820,7 +2756,7 @@ init_pll(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
 
 	BIOSLOG(bios, "0x%04X: Reg: 0x%08X, Freq: %d0kHz\n", offset, reg, freq);
 
-	setPLL(bios, reg, freq * 10);
+	setPLL(bios->dev, reg, freq * 10);
 
 	return 7;
 }
@@ -2898,7 +2834,7 @@ init_ram_restrict_pll(struct nvbios *bios, uint16_t offset,
 				      "Type %02x Reg 0x%08x Freq %dKHz\n",
 				offset, type, reg, freq);
 
-			setPLL(bios, reg, freq);
+			setPLL(bios->dev, reg, freq);
 			return len;
 		}
 	}
@@ -4305,447 +4241,6 @@ int run_tmds_table(struct drm_device *dev, struct dcb_entry *dcbent, int head, i
 	return 0;
 }
 
-struct pll_mapping {
-	u8  type;
-	u32 reg;
-};
-
-static struct pll_mapping nv04_pll_mapping[] = {
-	{ PLL_CORE  , NV_PRAMDAC_NVPLL_COEFF },
-	{ PLL_MEMORY, NV_PRAMDAC_MPLL_COEFF },
-	{ PLL_VPLL0 , NV_PRAMDAC_VPLL_COEFF },
-	{ PLL_VPLL1 , NV_RAMDAC_VPLL2 },
-	{}
-};
-
-static struct pll_mapping nv40_pll_mapping[] = {
-	{ PLL_CORE  , 0x004000 },
-	{ PLL_MEMORY, 0x004020 },
-	{ PLL_VPLL0 , NV_PRAMDAC_VPLL_COEFF },
-	{ PLL_VPLL1 , NV_RAMDAC_VPLL2 },
-	{}
-};
-
-static struct pll_mapping nv50_pll_mapping[] = {
-	{ PLL_CORE  , 0x004028 },
-	{ PLL_SHADER, 0x004020 },
-	{ PLL_UNK03 , 0x004000 },
-	{ PLL_MEMORY, 0x004008 },
-	{ PLL_UNK40 , 0x00e810 },
-	{ PLL_UNK41 , 0x00e818 },
-	{ PLL_UNK42 , 0x00e824 },
-	{ PLL_VPLL0 , 0x614100 },
-	{ PLL_VPLL1 , 0x614900 },
-	{}
-};
-
-static struct pll_mapping nv84_pll_mapping[] = {
-	{ PLL_CORE  , 0x004028 },
-	{ PLL_SHADER, 0x004020 },
-	{ PLL_MEMORY, 0x004008 },
-	{ PLL_VDEC  , 0x004030 },
-	{ PLL_UNK41 , 0x00e818 },
-	{ PLL_VPLL0 , 0x614100 },
-	{ PLL_VPLL1 , 0x614900 },
-	{}
-};
-
-u32
-get_pll_register(struct drm_device *dev, enum pll_types type)
-{
-	struct drm_nouveau_private *dev_priv = dev->dev_private;
-	struct nvbios *bios = &dev_priv->vbios;
-	struct pll_mapping *map;
-	int i;
-
-	if (dev_priv->card_type < NV_40)
-		map = nv04_pll_mapping;
-	else
-	if (dev_priv->card_type < NV_50)
-		map = nv40_pll_mapping;
-	else {
-		u8 *plim = &bios->data[bios->pll_limit_tbl_ptr];
-
-		if (plim[0] >= 0x30) {
-			u8 *entry = plim + plim[1];
-			for (i = 0; i < plim[3]; i++, entry += plim[2]) {
-				if (entry[0] == type)
-					return ROM32(entry[3]);
-			}
-
-			return 0;
-		}
-
-		if (dev_priv->chipset == 0x50)
-			map = nv50_pll_mapping;
-		else
-			map = nv84_pll_mapping;
-	}
-
-	while (map->reg) {
-		if (map->type == type)
-			return map->reg;
-		map++;
-	}
-
-	return 0;
-}
-
-int get_pll_limits(struct drm_device *dev, uint32_t limit_match, struct pll_lims *pll_lim)
-{
-	/*
-	 * PLL limits table
-	 *
-	 * Version 0x10: NV30, NV31
-	 * One byte header (version), one record of 24 bytes
-	 * Version 0x11: NV36 - Not implemented
-	 * Seems to have same record style as 0x10, but 3 records rather than 1
-	 * Version 0x20: Found on Geforce 6 cards
-	 * Trivial 4 byte BIT header. 31 (0x1f) byte record length
-	 * Version 0x21: Found on Geforce 7, 8 and some Geforce 6 cards
-	 * 5 byte header, fifth byte of unknown purpose. 35 (0x23) byte record
-	 * length in general, some (integrated) have an extra configuration byte
-	 * Version 0x30: Found on Geforce 8, separates the register mapping
-	 * from the limits tables.
-	 */
-
-	struct drm_nouveau_private *dev_priv = dev->dev_private;
-	struct nvbios *bios = &dev_priv->vbios;
-	int cv = bios->chip_version, pllindex = 0;
-	uint8_t pll_lim_ver = 0, headerlen = 0, recordlen = 0, entries = 0;
-	uint32_t crystal_strap_mask, crystal_straps;
-
-	if (!bios->pll_limit_tbl_ptr) {
-		if (cv == 0x30 || cv == 0x31 || cv == 0x35 || cv == 0x36 ||
-		    cv >= 0x40) {
-			NV_ERROR(dev, "Pointer to PLL limits table invalid\n");
-			return -EINVAL;
-		}
-	} else
-		pll_lim_ver = bios->data[bios->pll_limit_tbl_ptr];
-
-	crystal_strap_mask = 1 << 6;
-	/* open coded dev->twoHeads test */
-	if (cv > 0x10 && cv != 0x15 && cv != 0x1a && cv != 0x20)
-		crystal_strap_mask |= 1 << 22;
-	crystal_straps = nvReadEXTDEV(dev, NV_PEXTDEV_BOOT_0) &
-							crystal_strap_mask;
-
-	switch (pll_lim_ver) {
-	/*
-	 * We use version 0 to indicate a pre limit table bios (single stage
-	 * pll) and load the hard coded limits instead.
-	 */
-	case 0:
-		break;
-	case 0x10:
-	case 0x11:
-		/*
-		 * Strictly v0x11 has 3 entries, but the last two don't seem
-		 * to get used.
-		 */
-		headerlen = 1;
-		recordlen = 0x18;
-		entries = 1;
-		pllindex = 0;
-		break;
-	case 0x20:
-	case 0x21:
-	case 0x30:
-	case 0x40:
-		headerlen = bios->data[bios->pll_limit_tbl_ptr + 1];
-		recordlen = bios->data[bios->pll_limit_tbl_ptr + 2];
-		entries = bios->data[bios->pll_limit_tbl_ptr + 3];
-		break;
-	default:
-		NV_ERROR(dev, "PLL limits table revision 0x%X not currently "
-				"supported\n", pll_lim_ver);
-		return -ENOSYS;
-	}
-
-	/* initialize all members to zero */
-	memset(pll_lim, 0, sizeof(struct pll_lims));
-
-	/* if we were passed a type rather than a register, figure
-	 * out the register and store it
-	 */
-	if (limit_match > PLL_MAX)
-		pll_lim->reg = limit_match;
-	else {
-		pll_lim->reg = get_pll_register(dev, limit_match);
-		if (!pll_lim->reg)
-			return -ENOENT;
-	}
-
-	if (pll_lim_ver == 0x10 || pll_lim_ver == 0x11) {
-		uint8_t *pll_rec = &bios->data[bios->pll_limit_tbl_ptr + headerlen + recordlen * pllindex];
-
-		pll_lim->vco1.minfreq = ROM32(pll_rec[0]);
-		pll_lim->vco1.maxfreq = ROM32(pll_rec[4]);
-		pll_lim->vco2.minfreq = ROM32(pll_rec[8]);
-		pll_lim->vco2.maxfreq = ROM32(pll_rec[12]);
-		pll_lim->vco1.min_inputfreq = ROM32(pll_rec[16]);
-		pll_lim->vco2.min_inputfreq = ROM32(pll_rec[20]);
-		pll_lim->vco1.max_inputfreq = pll_lim->vco2.max_inputfreq = INT_MAX;
-
-		/* these values taken from nv30/31/36 */
-		pll_lim->vco1.min_n = 0x1;
-		if (cv == 0x36)
-			pll_lim->vco1.min_n = 0x5;
-		pll_lim->vco1.max_n = 0xff;
-		pll_lim->vco1.min_m = 0x1;
-		pll_lim->vco1.max_m = 0xd;
-		pll_lim->vco2.min_n = 0x4;
-		/*
-		 * On nv30, 31, 36 (i.e. all cards with two stage PLLs with this
-		 * table version (apart from nv35)), N2 is compared to
-		 * maxN2 (0x46) and 10 * maxM2 (0x4), so set maxN2 to 0x28 and
-		 * save a comparison
-		 */
-		pll_lim->vco2.max_n = 0x28;
-		if (cv == 0x30 || cv == 0x35)
-			/* only 5 bits available for N2 on nv30/35 */
-			pll_lim->vco2.max_n = 0x1f;
-		pll_lim->vco2.min_m = 0x1;
-		pll_lim->vco2.max_m = 0x4;
-		pll_lim->max_log2p = 0x7;
-		pll_lim->max_usable_log2p = 0x6;
-	} else if (pll_lim_ver == 0x20 || pll_lim_ver == 0x21) {
-		uint16_t plloffs = bios->pll_limit_tbl_ptr + headerlen;
-		uint8_t *pll_rec;
-		int i;
-
-		/*
-		 * First entry is default match, if nothing better. warn if
-		 * reg field nonzero
-		 */
-		if (ROM32(bios->data[plloffs]))
-			NV_WARN(dev, "Default PLL limit entry has non-zero "
-				       "register field\n");
-
-		for (i = 1; i < entries; i++)
-			if (ROM32(bios->data[plloffs + recordlen * i]) == pll_lim->reg) {
-				pllindex = i;
-				break;
-			}
-
-		if ((dev_priv->card_type >= NV_50) && (pllindex == 0)) {
-			NV_ERROR(dev, "Register 0x%08x not found in PLL "
-				 "limits table", pll_lim->reg);
-			return -ENOENT;
-		}
-
-		pll_rec = &bios->data[plloffs + recordlen * pllindex];
-
-		BIOSLOG(bios, "Loading PLL limits for reg 0x%08x\n",
-			pllindex ? pll_lim->reg : 0);
-
-		/*
-		 * Frequencies are stored in tables in MHz, kHz are more
-		 * useful, so we convert.
-		 */
-
-		/* What output frequencies can each VCO generate? */
-		pll_lim->vco1.minfreq = ROM16(pll_rec[4]) * 1000;
-		pll_lim->vco1.maxfreq = ROM16(pll_rec[6]) * 1000;
-		pll_lim->vco2.minfreq = ROM16(pll_rec[8]) * 1000;
-		pll_lim->vco2.maxfreq = ROM16(pll_rec[10]) * 1000;
-
-		/* What input frequencies they accept (past the m-divider)? */
-		pll_lim->vco1.min_inputfreq = ROM16(pll_rec[12]) * 1000;
-		pll_lim->vco2.min_inputfreq = ROM16(pll_rec[14]) * 1000;
-		pll_lim->vco1.max_inputfreq = ROM16(pll_rec[16]) * 1000;
-		pll_lim->vco2.max_inputfreq = ROM16(pll_rec[18]) * 1000;
-
-		/* What values are accepted as multiplier and divider? */
-		pll_lim->vco1.min_n = pll_rec[20];
-		pll_lim->vco1.max_n = pll_rec[21];
-		pll_lim->vco1.min_m = pll_rec[22];
-		pll_lim->vco1.max_m = pll_rec[23];
-		pll_lim->vco2.min_n = pll_rec[24];
-		pll_lim->vco2.max_n = pll_rec[25];
-		pll_lim->vco2.min_m = pll_rec[26];
-		pll_lim->vco2.max_m = pll_rec[27];
-
-		pll_lim->max_usable_log2p = pll_lim->max_log2p = pll_rec[29];
-		if (pll_lim->max_log2p > 0x7)
-			/* pll decoding in nv_hw.c assumes never > 7 */
-			NV_WARN(dev, "Max log2 P value greater than 7 (%d)\n",
-				pll_lim->max_log2p);
-		if (cv < 0x60)
-			pll_lim->max_usable_log2p = 0x6;
-		pll_lim->log2p_bias = pll_rec[30];
-
-		if (recordlen > 0x22)
-			pll_lim->refclk = ROM32(pll_rec[31]);
-
-		if (recordlen > 0x23 && pll_rec[35])
-			NV_WARN(dev,
-				"Bits set in PLL configuration byte (%x)\n",
-				pll_rec[35]);
-
-		/* C51 special not seen elsewhere */
-		if (cv == 0x51 && !pll_lim->refclk) {
-			uint32_t sel_clk = bios_rd32(bios, NV_PRAMDAC_SEL_CLK);
-
-			if ((pll_lim->reg == NV_PRAMDAC_VPLL_COEFF && sel_clk & 0x20) ||
-			    (pll_lim->reg == NV_RAMDAC_VPLL2 && sel_clk & 0x80)) {
-				if (bios_idxprt_rd(bios, NV_CIO_CRX__COLOR, NV_CIO_CRE_CHIP_ID_INDEX) < 0xa3)
-					pll_lim->refclk = 200000;
-				else
-					pll_lim->refclk = 25000;
-			}
-		}
-	} else if (pll_lim_ver == 0x30) { /* ver 0x30 */
-		uint8_t *entry = &bios->data[bios->pll_limit_tbl_ptr + headerlen];
-		uint8_t *record = NULL;
-		int i;
-
-		BIOSLOG(bios, "Loading PLL limits for register 0x%08x\n",
-			pll_lim->reg);
-
-		for (i = 0; i < entries; i++, entry += recordlen) {
-			if (ROM32(entry[3]) == pll_lim->reg) {
-				record = &bios->data[ROM16(entry[1])];
-				break;
-			}
-		}
-
-		if (!record) {
-			NV_ERROR(dev, "Register 0x%08x not found in PLL "
-				 "limits table", pll_lim->reg);
-			return -ENOENT;
-		}
-
-		pll_lim->vco1.minfreq = ROM16(record[0]) * 1000;
-		pll_lim->vco1.maxfreq = ROM16(record[2]) * 1000;
-		pll_lim->vco2.minfreq = ROM16(record[4]) * 1000;
-		pll_lim->vco2.maxfreq = ROM16(record[6]) * 1000;
-		pll_lim->vco1.min_inputfreq = ROM16(record[8]) * 1000;
-		pll_lim->vco2.min_inputfreq = ROM16(record[10]) * 1000;
-		pll_lim->vco1.max_inputfreq = ROM16(record[12]) * 1000;
-		pll_lim->vco2.max_inputfreq = ROM16(record[14]) * 1000;
-		pll_lim->vco1.min_n = record[16];
-		pll_lim->vco1.max_n = record[17];
-		pll_lim->vco1.min_m = record[18];
-		pll_lim->vco1.max_m = record[19];
-		pll_lim->vco2.min_n = record[20];
-		pll_lim->vco2.max_n = record[21];
-		pll_lim->vco2.min_m = record[22];
-		pll_lim->vco2.max_m = record[23];
-		pll_lim->max_usable_log2p = pll_lim->max_log2p = record[25];
-		pll_lim->log2p_bias = record[27];
-		pll_lim->refclk = ROM32(record[28]);
-	} else if (pll_lim_ver) { /* ver 0x40 */
-		uint8_t *entry = &bios->data[bios->pll_limit_tbl_ptr + headerlen];
-		uint8_t *record = NULL;
-		int i;
-
-		BIOSLOG(bios, "Loading PLL limits for register 0x%08x\n",
-			pll_lim->reg);
-
-		for (i = 0; i < entries; i++, entry += recordlen) {
-			if (ROM32(entry[3]) == pll_lim->reg) {
-				record = &bios->data[ROM16(entry[1])];
-				break;
-			}
-		}
-
-		if (!record) {
-			NV_ERROR(dev, "Register 0x%08x not found in PLL "
-				 "limits table", pll_lim->reg);
-			return -ENOENT;
-		}
-
-		pll_lim->vco1.minfreq = ROM16(record[0]) * 1000;
-		pll_lim->vco1.maxfreq = ROM16(record[2]) * 1000;
-		pll_lim->vco1.min_inputfreq = ROM16(record[4]) * 1000;
-		pll_lim->vco1.max_inputfreq = ROM16(record[6]) * 1000;
-		pll_lim->vco1.min_m = record[8];
-		pll_lim->vco1.max_m = record[9];
-		pll_lim->vco1.min_n = record[10];
-		pll_lim->vco1.max_n = record[11];
-		pll_lim->min_p = record[12];
-		pll_lim->max_p = record[13];
-		pll_lim->refclk = ROM16(entry[9]) * 1000;
-	}
-
-	/*
-	 * By now any valid limit table ought to have set a max frequency for
-	 * vco1, so if it's zero it's either a pre limit table bios, or one
-	 * with an empty limit table (seen on nv18)
-	 */
-	if (!pll_lim->vco1.maxfreq) {
-		pll_lim->vco1.minfreq = bios->fminvco;
-		pll_lim->vco1.maxfreq = bios->fmaxvco;
-		pll_lim->vco1.min_inputfreq = 0;
-		pll_lim->vco1.max_inputfreq = INT_MAX;
-		pll_lim->vco1.min_n = 0x1;
-		pll_lim->vco1.max_n = 0xff;
-		pll_lim->vco1.min_m = 0x1;
-		if (crystal_straps == 0) {
-			/* nv05 does this, nv11 doesn't, nv10 unknown */
-			if (cv < 0x11)
-				pll_lim->vco1.min_m = 0x7;
-			pll_lim->vco1.max_m = 0xd;
-		} else {
-			if (cv < 0x11)
-				pll_lim->vco1.min_m = 0x8;
-			pll_lim->vco1.max_m = 0xe;
-		}
-		if (cv < 0x17 || cv == 0x1a || cv == 0x20)
-			pll_lim->max_log2p = 4;
-		else
-			pll_lim->max_log2p = 5;
-		pll_lim->max_usable_log2p = pll_lim->max_log2p;
-	}
-
-	if (!pll_lim->refclk)
-		switch (crystal_straps) {
-		case 0:
-			pll_lim->refclk = 13500;
-			break;
-		case (1 << 6):
-			pll_lim->refclk = 14318;
-			break;
-		case (1 << 22):
-			pll_lim->refclk = 27000;
-			break;
-		case (1 << 22 | 1 << 6):
-			pll_lim->refclk = 25000;
-			break;
-		}
-
-	NV_DEBUG(dev, "pll.vco1.minfreq: %d\n", pll_lim->vco1.minfreq);
-	NV_DEBUG(dev, "pll.vco1.maxfreq: %d\n", pll_lim->vco1.maxfreq);
-	NV_DEBUG(dev, "pll.vco1.min_inputfreq: %d\n", pll_lim->vco1.min_inputfreq);
-	NV_DEBUG(dev, "pll.vco1.max_inputfreq: %d\n", pll_lim->vco1.max_inputfreq);
-	NV_DEBUG(dev, "pll.vco1.min_n: %d\n", pll_lim->vco1.min_n);
-	NV_DEBUG(dev, "pll.vco1.max_n: %d\n", pll_lim->vco1.max_n);
-	NV_DEBUG(dev, "pll.vco1.min_m: %d\n", pll_lim->vco1.min_m);
-	NV_DEBUG(dev, "pll.vco1.max_m: %d\n", pll_lim->vco1.max_m);
-	if (pll_lim->vco2.maxfreq) {
-		NV_DEBUG(dev, "pll.vco2.minfreq: %d\n", pll_lim->vco2.minfreq);
-		NV_DEBUG(dev, "pll.vco2.maxfreq: %d\n", pll_lim->vco2.maxfreq);
-		NV_DEBUG(dev, "pll.vco2.min_inputfreq: %d\n", pll_lim->vco2.min_inputfreq);
-		NV_DEBUG(dev, "pll.vco2.max_inputfreq: %d\n", pll_lim->vco2.max_inputfreq);
-		NV_DEBUG(dev, "pll.vco2.min_n: %d\n", pll_lim->vco2.min_n);
-		NV_DEBUG(dev, "pll.vco2.max_n: %d\n", pll_lim->vco2.max_n);
-		NV_DEBUG(dev, "pll.vco2.min_m: %d\n", pll_lim->vco2.min_m);
-		NV_DEBUG(dev, "pll.vco2.max_m: %d\n", pll_lim->vco2.max_m);
-	}
-	if (!pll_lim->max_p) {
-		NV_DEBUG(dev, "pll.max_log2p: %d\n", pll_lim->max_log2p);
-		NV_DEBUG(dev, "pll.log2p_bias: %d\n", pll_lim->log2p_bias);
-	} else {
-		NV_DEBUG(dev, "pll.min_p: %d\n", pll_lim->min_p);
-		NV_DEBUG(dev, "pll.max_p: %d\n", pll_lim->max_p);
-	}
-	NV_DEBUG(dev, "pll.refclk: %d\n", pll_lim->refclk);
-
-	return 0;
-}
-
 static void parse_bios_version(struct drm_device *dev, struct nvbios *bios, uint16_t offset)
 {
 	/*