diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2022-12-13 14:31:47 -0800 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2022-12-13 14:31:47 -0800 |
| commit | fc4c9f450493daef1c996c9d4b3c647ec3121509 (patch) | |
| tree | 99078a5d34ba783b9b43092fe2c275784c7cab98 /drivers/firmware | |
| parent | 717e6eb49bdd98357d14c90d60a3409196b33cfc (diff) | |
| parent | e8dfdf3162eb549d064b8c10b1564f7e8ee82591 (diff) | |
Merge tag 'efi-next-for-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI updates from Ard Biesheuvel:
"Another fairly sizable pull request, by EFI subsystem standards.
Most of the work was done by me, some of it in collaboration with the
distro and bootloader folks (GRUB, systemd-boot), where the main focus
has been on removing pointless per-arch differences in the way EFI
boots a Linux kernel.
- Refactor the zboot code so that it incorporates all the EFI stub
logic, rather than calling the decompressed kernel as a EFI app.
- Add support for initrd= command line option to x86 mixed mode.
- Allow initrd= to be used with arbitrary EFI accessible file systems
instead of just the one the kernel itself was loaded from.
- Move some x86-only handling and manipulation of the EFI memory map
into arch/x86, as it is not used anywhere else.
- More flexible handling of any random seeds provided by the boot
environment (i.e., systemd-boot) so that it becomes available much
earlier during the boot.
- Allow improved arch-agnostic EFI support in loaders, by setting a
uniform baseline of supported features, and adding a generic magic
number to the DOS/PE header. This should allow loaders such as GRUB
or systemd-boot to reduce the amount of arch-specific handling
substantially.
- (arm64) Run EFI runtime services from a dedicated stack, and use it
to recover from synchronous exceptions that might occur in the
firmware code.
- (arm64) Ensure that we don't allocate memory outside of the 48-bit
addressable physical range.
- Make EFI pstore record size configurable
- Add support for decoding CXL specific CPER records"
* tag 'efi-next-for-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi: (43 commits)
arm64: efi: Recover from synchronous exceptions occurring in firmware
arm64: efi: Execute runtime services from a dedicated stack
arm64: efi: Limit allocations to 48-bit addressable physical region
efi: Put Linux specific magic number in the DOS header
efi: libstub: Always enable initrd command line loader and bump version
efi: stub: use random seed from EFI variable
efi: vars: prohibit reading random seed variables
efi: random: combine bootloader provided RNG seed with RNG protocol output
efi/cper, cxl: Decode CXL Error Log
efi/cper, cxl: Decode CXL Protocol Error Section
efi: libstub: fix efi_load_initrd_dev_path() kernel-doc comment
efi: x86: Move EFI runtime map sysfs code to arch/x86
efi: runtime-maps: Clarify purpose and enable by default for kexec
efi: pstore: Add module parameter for setting the record size
efi: xen: Set EFI_PARAVIRT for Xen dom0 boot on all architectures
efi: memmap: Move manipulation routines into x86 arch tree
efi: memmap: Move EFI fake memmap support into x86 arch tree
efi: libstub: Undeprecate the command line initrd loader
efi: libstub: Add mixed mode support to command line initrd loader
efi: libstub: Permit mixed mode return types other than efi_status_t
...
Diffstat (limited to 'drivers/firmware')
40 files changed, 1494 insertions, 1564 deletions
diff --git a/drivers/firmware/efi/Kconfig b/drivers/firmware/efi/Kconfig index 6787ed8dfacf..043ca31c114e 100644 --- a/drivers/firmware/efi/Kconfig +++ b/drivers/firmware/efi/Kconfig @@ -26,39 +26,6 @@ config EFI_VARS_PSTORE_DEFAULT_DISABLE backend for pstore by default. This setting can be overridden using the efivars module's pstore_disable parameter. -config EFI_RUNTIME_MAP - bool "Export efi runtime maps to sysfs" - depends on X86 && EFI && KEXEC_CORE - default y - help - Export efi runtime memory maps to /sys/firmware/efi/runtime-map. - That memory map is used for example by kexec to set up efi virtual - mapping the 2nd kernel, but can also be used for debugging purposes. - - See also Documentation/ABI/testing/sysfs-firmware-efi-runtime-map. - -config EFI_FAKE_MEMMAP - bool "Enable EFI fake memory map" - depends on EFI && X86 - default n - help - Saying Y here will enable "efi_fake_mem" boot option. - By specifying this parameter, you can add arbitrary attribute - to specific memory range by updating original (firmware provided) - EFI memmap. - This is useful for debugging of EFI memmap related feature. - e.g. Address Range Mirroring feature. - -config EFI_MAX_FAKE_MEM - int "maximum allowable number of ranges in efi_fake_mem boot option" - depends on EFI_FAKE_MEMMAP - range 1 128 - default 8 - help - Maximum allowable number of ranges in efi_fake_mem boot option. - Ranges can be set up to this value using comma-separated list. - The default value is 8. - config EFI_SOFT_RESERVE bool "Reserve EFI Specific Purpose Memory" depends on EFI && EFI_STUB && ACPI_HMAT @@ -139,18 +106,6 @@ config EFI_ARMSTUB_DTB_LOADER functionality for bootloaders that do not have such support this option is necessary. -config EFI_GENERIC_STUB_INITRD_CMDLINE_LOADER - bool "Enable the command line initrd loader" if !X86 - depends on EFI_STUB && (EFI_GENERIC_STUB || X86) - default y if X86 - depends on !RISCV && !LOONGARCH - help - Select this config option to add support for the initrd= command - line parameter, allowing an initrd that resides on the same volume - as the kernel image to be loaded into memory. - - This method is deprecated. - config EFI_BOOTLOADER_CONTROL tristate "EFI Bootloader Control" select UCS2_STRING diff --git a/drivers/firmware/efi/Makefile b/drivers/firmware/efi/Makefile index 8d151e332584..b51f2a4c821e 100644 --- a/drivers/firmware/efi/Makefile +++ b/drivers/firmware/efi/Makefile @@ -19,11 +19,9 @@ endif obj-$(CONFIG_EFI_PARAMS_FROM_FDT) += fdtparams.o obj-$(CONFIG_EFI_ESRT) += esrt.o obj-$(CONFIG_EFI_VARS_PSTORE) += efi-pstore.o -obj-$(CONFIG_UEFI_CPER) += cper.o -obj-$(CONFIG_EFI_RUNTIME_MAP) += runtime-map.o +obj-$(CONFIG_UEFI_CPER) += cper.o cper_cxl.o obj-$(CONFIG_EFI_RUNTIME_WRAPPERS) += runtime-wrappers.o subdir-$(CONFIG_EFI_STUB) += libstub -obj-$(CONFIG_EFI_FAKE_MEMMAP) += fake_map.o obj-$(CONFIG_EFI_BOOTLOADER_CONTROL) += efibc.o obj-$(CONFIG_EFI_TEST) += test/ obj-$(CONFIG_EFI_DEV_PATH_PARSER) += dev-path-parser.o @@ -32,9 +30,6 @@ obj-$(CONFIG_EFI_RCI2_TABLE) += rci2-table.o obj-$(CONFIG_EFI_EMBEDDED_FIRMWARE) += embedded-firmware.o obj-$(CONFIG_LOAD_UEFI_KEYS) += mokvar-table.o -fake_map-y += fake_mem.o -fake_map-$(CONFIG_X86) += x86_fake_mem.o - obj-$(CONFIG_SYSFB) += sysfb_efi.o arm-obj-$(CONFIG_EFI) := efi-init.o arm-runtime.o diff --git a/drivers/firmware/efi/cper.c b/drivers/firmware/efi/cper.c index 053eae13f409..35c37f667781 100644 --- a/drivers/firmware/efi/cper.c +++ b/drivers/firmware/efi/cper.c @@ -24,6 +24,7 @@ #include <linux/bcd.h> #include <acpi/ghes.h> #include <ras/ras_event.h> +#include "cper_cxl.h" /* * CPER record ID need to be unique even after reboot, because record @@ -598,6 +599,14 @@ cper_estatus_print_section(const char *pfx, struct acpi_hest_generic_data *gdata cper_print_fw_err(newpfx, gdata, fw_err); else goto err_section_too_small; + } else if (guid_equal(sec_type, &CPER_SEC_CXL_PROT_ERR)) { + struct cper_sec_prot_err *prot_err = acpi_hest_get_payload(gdata); + + printk("%ssection_type: CXL Protocol Error\n", newpfx); + if (gdata->error_data_length >= sizeof(*prot_err)) + cper_print_prot_err(newpfx, prot_err); + else + goto err_section_too_small; } else { const void *err = acpi_hest_get_payload(gdata); diff --git a/drivers/firmware/efi/cper_cxl.c b/drivers/firmware/efi/cper_cxl.c new file mode 100644 index 000000000000..53e435c4f310 --- /dev/null +++ b/drivers/firmware/efi/cper_cxl.c @@ -0,0 +1,179 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * UEFI Common Platform Error Record (CPER) support for CXL Section. + * + * Copyright (C) 2022 Advanced Micro Devices, Inc. + * + * Author: Smita Koralahalli <Smita.KoralahalliChannabasappa@amd.com> + */ + +#include <linux/cper.h> +#include "cper_cxl.h" +#include <linux/cxl_err.h> + +#define PROT_ERR_VALID_AGENT_TYPE BIT_ULL(0) +#define PROT_ERR_VALID_AGENT_ADDRESS BIT_ULL(1) +#define PROT_ERR_VALID_DEVICE_ID BIT_ULL(2) +#define PROT_ERR_VALID_SERIAL_NUMBER BIT_ULL(3) +#define PROT_ERR_VALID_CAPABILITY BIT_ULL(4) +#define PROT_ERR_VALID_DVSEC BIT_ULL(5) +#define PROT_ERR_VALID_ERROR_LOG BIT_ULL(6) + +static const char * const prot_err_agent_type_strs[] = { + "Restricted CXL Device", + "Restricted CXL Host Downstream Port", + "CXL Device", + "CXL Logical Device", + "CXL Fabric Manager managed Logical Device", + "CXL Root Port", + "CXL Downstream Switch Port", + "CXL Upstream Switch Port", +}; + +/* + * The layout of the enumeration and the values matches CXL Agent Type + * field in the UEFI 2.10 Section N.2.13, + */ +enum { + RCD, /* Restricted CXL Device */ + RCH_DP, /* Restricted CXL Host Downstream Port */ + DEVICE, /* CXL Device */ + LD, /* CXL Logical Device */ + FMLD, /* CXL Fabric Manager managed Logical Device */ + RP, /* CXL Root Port */ + DSP, /* CXL Downstream Switch Port */ + USP, /* CXL Upstream Switch Port */ +}; + +void cper_print_prot_err(const char *pfx, const struct cper_sec_prot_err *prot_err) +{ + if (prot_err->valid_bits & PROT_ERR_VALID_AGENT_TYPE) + pr_info("%s agent_type: %d, %s\n", pfx, prot_err->agent_type, + prot_err->agent_type < ARRAY_SIZE(prot_err_agent_type_strs) + ? prot_err_agent_type_strs[prot_err->agent_type] + : "unknown"); + + if (prot_err->valid_bits & PROT_ERR_VALID_AGENT_ADDRESS) { + switch (prot_err->agent_type) { + /* + * According to UEFI 2.10 Section N.2.13, the term CXL Device + * is used to refer to Restricted CXL Device, CXL Device, CXL + * Logical Device or a CXL Fabric Manager Managed Logical + * Device. + */ + case RCD: + case DEVICE: + case LD: + case FMLD: + case RP: + case DSP: + case USP: + pr_info("%s agent_address: %04x:%02x:%02x.%x\n", + pfx, prot_err->agent_addr.segment, + prot_err->agent_addr.bus, + prot_err->agent_addr.device, + prot_err->agent_addr.function); + break; + case RCH_DP: + pr_info("%s rcrb_base_address: 0x%016llx\n", pfx, + prot_err->agent_addr.rcrb_base_addr); + break; + default: + break; + } + } + + if (prot_err->valid_bits & PROT_ERR_VALID_DEVICE_ID) { + const __u8 *class_code; + + switch (prot_err->agent_type) { + case RCD: + case DEVICE: + case LD: + case FMLD: + case RP: + case DSP: + case USP: + pr_info("%s slot: %d\n", pfx, + prot_err->device_id.slot >> CPER_PCIE_SLOT_SHIFT); + pr_info("%s vendor_id: 0x%04x, device_id: 0x%04x\n", + pfx, prot_err->device_id.vendor_id, + prot_err->device_id.device_id); + pr_info("%s sub_vendor_id: 0x%04x, sub_device_id: 0x%04x\n", + pfx, prot_err->device_id.subsystem_vendor_id, + prot_err->device_id.subsystem_id); + class_code = prot_err->device_id.class_code; + pr_info("%s class_code: %02x%02x\n", pfx, + class_code[1], class_code[0]); + break; + default: + break; + } + } + + if (prot_err->valid_bits & PROT_ERR_VALID_SERIAL_NUMBER) { + switch (prot_err->agent_type) { + case RCD: + case DEVICE: + case LD: + case FMLD: + pr_info("%s lower_dw: 0x%08x, upper_dw: 0x%08x\n", pfx, + prot_err->dev_serial_num.lower_dw, + prot_err->dev_serial_num.upper_dw); + break; + default: + break; + } + } + + if (prot_err->valid_bits & PROT_ERR_VALID_CAPABILITY) { + switch (prot_err->agent_type) { + case RCD: + case DEVICE: + case LD: + case FMLD: + case RP: + case DSP: + case USP: + print_hex_dump(pfx, "", DUMP_PREFIX_OFFSET, 16, 4, + prot_err->capability, + sizeof(prot_err->capability), 0); + break; + default: + break; + } + } + + if (prot_err->valid_bits & PROT_ERR_VALID_DVSEC) { + pr_info("%s DVSEC length: 0x%04x\n", pfx, prot_err->dvsec_len); + + pr_info("%s CXL DVSEC:\n", pfx); + print_hex_dump(pfx, "", DUMP_PREFIX_OFFSET, 16, 4, (prot_err + 1), + prot_err->dvsec_len, 0); + } + + if (prot_err->valid_bits & PROT_ERR_VALID_ERROR_LOG) { + size_t size = sizeof(*prot_err) + prot_err->dvsec_len; + struct cxl_ras_capability_regs *cxl_ras; + + pr_info("%s Error log length: 0x%04x\n", pfx, prot_err->err_len); + + pr_info("%s CXL Error Log:\n", pfx); + cxl_ras = (struct cxl_ras_capability_regs *)((long)prot_err + size); + pr_info("%s cxl_ras_uncor_status: 0x%08x", pfx, + cxl_ras->uncor_status); + pr_info("%s cxl_ras_uncor_mask: 0x%08x\n", pfx, + cxl_ras->uncor_mask); + pr_info("%s cxl_ras_uncor_severity: 0x%08x\n", pfx, + cxl_ras->uncor_severity); + pr_info("%s cxl_ras_cor_status: 0x%08x", pfx, + cxl_ras->cor_status); + pr_info("%s cxl_ras_cor_mask: 0x%08x\n", pfx, + cxl_ras->cor_mask); + pr_info("%s cap_control: 0x%08x\n", pfx, + cxl_ras->cap_control); + pr_info("%s Header Log Registers:\n", pfx); + print_hex_dump(pfx, "", DUMP_PREFIX_OFFSET, 16, 4, cxl_ras->header_log, + sizeof(cxl_ras->header_log), 0); + } +} diff --git a/drivers/firmware/efi/cper_cxl.h b/drivers/firmware/efi/cper_cxl.h new file mode 100644 index 000000000000..86bfcf7909ec --- /dev/null +++ b/drivers/firmware/efi/cper_cxl.h @@ -0,0 +1,66 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * UEFI Common Platform Error Record (CPER) support for CXL Section. + * + * Copyright (C) 2022 Advanced Micro Devices, Inc. + * + * Author: Smita Koralahalli <Smita.KoralahalliChannabasappa@amd.com> + */ + +#ifndef LINUX_CPER_CXL_H +#define LINUX_CPER_CXL_H + +/* CXL Protocol Error Section */ +#define CPER_SEC_CXL_PROT_ERR \ + GUID_INIT(0x80B9EFB4, 0x52B5, 0x4DE3, 0xA7, 0x77, 0x68, 0x78, \ + 0x4B, 0x77, 0x10, 0x48) + +#pragma pack(1) + +/* Compute Express Link Protocol Error Section, UEFI v2.10 sec N.2.13 */ +struct cper_sec_prot_err { + u64 valid_bits; + u8 agent_type; + u8 reserved[7]; + + /* + * Except for RCH Downstream Port, all the remaining CXL Agent + * types are uniquely identified by the PCIe compatible SBDF number. + */ + union { + u64 rcrb_base_addr; + struct { + u8 function; + u8 device; + u8 bus; + u16 segment; + u8 reserved_1[3]; + }; + } agent_addr; + + struct { + u16 vendor_id; + u16 device_id; + u16 subsystem_vendor_id; + u16 subsystem_id; + u8 class_code[2]; + u16 slot; + u8 reserved_1[4]; + } device_id; + + struct { + u32 lower_dw; + u32 upper_dw; + } dev_serial_num; + + u8 capability[60]; + u16 dvsec_len; + u16 err_len; + u8 reserved_2[4]; +}; + +#pragma pack() + +void cper_print_prot_err(const char *pfx, const struct cper_sec_prot_err *prot_err); + +#endif //__CPER_CXL_ diff --git a/drivers/firmware/efi/efi-init.c b/drivers/firmware/efi/efi-init.c index 2fd770b499a3..1639159493e3 100644 --- a/drivers/firmware/efi/efi-init.c +++ b/drivers/firmware/efi/efi-init.c @@ -22,6 +22,8 @@ #include <asm/efi.h> +unsigned long __initdata screen_info_table = EFI_INVALID_TABLE_ADDR; + static int __init is_memory(efi_memory_desc_t *md) { if (md->attribute & (EFI_MEMORY_WB|EFI_MEMORY_WT|EFI_MEMORY_WC)) @@ -55,9 +57,22 @@ extern __weak const efi_config_table_type_t efi_arch_tables[]; static void __init init_screen_info(void) { - if (screen_info.orig_video_isVGA == VIDEO_TYPE_EFI && - memblock_is_map_memory(screen_info.lfb_base)) - memblock_mark_nomap(screen_info.lfb_base, screen_info.lfb_size); + struct screen_info *si; + + if (screen_info_table != EFI_INVALID_TABLE_ADDR) { + si = early_memremap(screen_info_table, sizeof(*si)); + if (!si) { + pr_err("Could not map screen_info config table\n"); + return; + } + screen_info = *si; + memset(si, 0, sizeof(*si)); + early_memunmap(si, sizeof(*si)); + + if (memblock_is_map_memory(screen_info.lfb_base)) + memblock_mark_nomap(screen_info.lfb_base, + screen_info.lfb_size); + } } static int __init uefi_init(u64 efi_system_table) diff --git a/drivers/firmware/efi/efi-pstore.c b/drivers/firmware/efi/efi-pstore.c index 97a9e84840a0..e7b9ec6f8a86 100644 --- a/drivers/firmware/efi/efi-pstore.c +++ b/drivers/firmware/efi/efi-pstore.c @@ -10,7 +10,9 @@ MODULE_IMPORT_NS(EFIVAR); #define DUMP_NAME_LEN 66 -#define EFIVARS_DATA_SIZE_MAX 1024 +static unsigned int record_size = 1024; +module_param(record_size, uint, 0444); +MODULE_PARM_DESC(record_size, "size of each pstore UEFI var (in bytes, min/default=1024)"); static bool efivars_pstore_disable = IS_ENABLED(CONFIG_EFI_VARS_PSTORE_DEFAULT_DISABLE); @@ -30,7 +32,7 @@ static int efi_pstore_open(struct pstore_info *psi) if (err) return err; - psi->data = kzalloc(EFIVARS_DATA_SIZE_MAX, GFP_KERNEL); + psi->data = kzalloc(record_size, GFP_KERNEL); if (!psi->data) return -ENOMEM; @@ -52,7 +54,7 @@ static inline u64 generic_id(u64 timestamp, unsigned int part, int count) static int efi_pstore_read_func(struct pstore_record *record, efi_char16_t *varname) { - unsigned long wlen, size = EFIVARS_DATA_SIZE_MAX; + unsigned long wlen, size = record_size; char name[DUMP_NAME_LEN], data_type; efi_status_t status; int cnt; @@ -133,7 +135,7 @@ static ssize_t efi_pstore_read(struct pstore_record *record) efi_status_t status; for (;;) { - varname_size = EFIVARS_DATA_SIZE_MAX; + varname_size = 1024; /* * If this is the first read() call in the pstore enumeration, @@ -224,11 +226,20 @@ static __init int efivars_pstore_init(void) if (efivars_pstore_disable) return 0; - efi_pstore_info.buf = kmalloc(4096, GFP_KERNEL); + /* + * Notice that 1024 is the minimum here to prevent issues with + * decompression algorithms that were spotted during tests; + * even in the case of not using compression, smaller values would + * just pollute more the pstore FS with many small collected files. + */ + if (record_size < 1024) + record_size = 1024; + + efi_pstore_info.buf = kmalloc(record_size, GFP_KERNEL); if (!efi_pstore_info.buf) return -ENOMEM; - efi_pstore_info.bufsize = 1024; + efi_pstore_info.bufsize = record_size; if (pstore_register(&efi_pstore_info)) { kfree(efi_pstore_info.buf); diff --git a/drivers/firmware/efi/efi.c b/drivers/firmware/efi/efi.c index 16dae588f0e3..31a4090c66b3 100644 --- a/drivers/firmware/efi/efi.c +++ b/drivers/firmware/efi/efi.c @@ -58,6 +58,8 @@ static unsigned long __initdata mem_reserve = EFI_INVALID_TABLE_ADDR; static unsigned long __initdata rt_prop = EFI_INVALID_TABLE_ADDR; static unsigned long __initdata initrd = EFI_INVALID_TABLE_ADDR; +extern unsigned long screen_info_table; + struct mm_struct efi_mm = { .mm_mt = MTREE_INIT_EXT(mm_mt, MM_MT_FLAGS, efi_mm.mmap_lock), .mm_users = ATOMIC_INIT(2), @@ -412,10 +414,6 @@ static int __init efisubsys_init(void) goto err_unregister; } - error = efi_runtime_map_init(efi_kobj); - if (error) - goto err_remove_group; - /* and the standard mountpoint for efivarfs */ error = sysfs_create_mount_point(efi_kobj, "efivars"); if (error) { @@ -442,6 +440,7 @@ err_unregister: generic_ops_unregister(); err_put: kobject_put(efi_kobj); + efi_kobj = NULL; destroy_workqueue(efi_rts_wq); return error; } @@ -566,6 +565,9 @@ static const efi_config_table_type_t common_tables[] __initconst = { #ifdef CONFIG_EFI_COCO_SECRET {LINUX_EFI_COCO_SECRET_AREA_GUID, &efi.coco_secret, "CocoSecret" }, #endif +#ifdef CONFIG_EFI_GENERIC_STUB + {LINUX_EFI_SCREEN_INFO_TABLE_GUID, &screen_info_table }, +#endif {}, }; @@ -630,7 +632,7 @@ int __init efi_config_parse_tables(const efi_config_table_t *config_tables, seed = early_memremap(efi_rng_seed, sizeof(*seed)); if (seed != NULL) { - size = min(seed->size, EFI_RANDOM_SEED_SIZE); + size = min_t(u32, seed->size, SZ_1K); // sanity check early_memunmap(seed, sizeof(*seed)); } else { pr_err("Could not map UEFI random seed!\n"); @@ -639,8 +641,8 @@ int __init efi_config_parse_tables(const efi_config_table_t *config_tables, seed = early_memremap(efi_rng_seed, sizeof(*seed) + size); if (seed != NULL) { - pr_notice("seeding entropy pool\n"); add_bootloader_randomness(seed->bits, size); + memzero_explicit(seed->bits, size); early_memunmap(seed, sizeof(*seed) + size); } else { pr_err("Could not map UEFI random seed!\n"); diff --git a/drivers/firmware/efi/fake_mem.c b/drivers/firmware/efi/fake_mem.c deleted file mode 100644 index 6e0f34a38171..000000000000 --- a/drivers/firmware/efi/fake_mem.c +++ /dev/null @@ -1,124 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * fake_mem.c - * - * Copyright (C) 2015 FUJITSU LIMITED - * Author: Taku Izumi <izumi.taku@jp.fujitsu.com> - * - * This code introduces new boot option named "efi_fake_mem" - * By specifying this parameter, you can add arbitrary attribute to - * specific memory range by updating original (firmware provided) EFI - * memmap. - */ - -#include <linux/kernel.h> -#include <linux/efi.h> -#include <linux/init.h> -#include <linux/memblock.h> -#include <linux/types.h> -#include <linux/sort.h> -#include "fake_mem.h" - -struct efi_mem_range efi_fake_mems[EFI_MAX_FAKEMEM]; -int nr_fake_mem; - -static int __init cmp_fake_mem(const void *x1, const void *x2) -{ - const struct efi_mem_range *m1 = x1; - const struct efi_mem_range *m2 = x2; - - if (m1->range.start < m2->range.start) - return -1; - if (m1->range.start > m2->range.start) - return 1; - return 0; -} - -static void __init efi_fake_range(struct efi_mem_range *efi_range) -{ - struct efi_memory_map_data data = { 0 }; - int new_nr_map = efi.memmap.nr_map; - efi_memory_desc_t *md; - void *new_memmap; - - /* count up the number of EFI memory descriptor */ - for_each_efi_memory_desc(md) - new_nr_map += efi_memmap_split_count(md, &efi_range->range); - - /* allocate memory for new EFI memmap */ - if (efi_memmap_alloc(new_nr_map, &data) != 0) - return; - - /* create new EFI memmap */ - new_memmap = early_memremap(data.phys_map, data.size); - if (!new_memmap) { - __efi_memmap_free(data.phys_map, data.size, data.flags); - return; - } - - efi_memmap_insert(&efi.memmap, new_memmap, efi_range); - - /* swap into new EFI memmap */ - early_memunmap(new_memmap, data.size); - - efi_memmap_install(&data); -} - -void __init efi_fake_memmap(void) -{ - int i; - - if (!efi_enabled(EFI_MEMMAP) || !nr_fake_mem) - return; - - for (i = 0; i < nr_fake_mem; i++) - efi_fake_range(&efi_fake_mems[i]); - - /* print new EFI memmap */ - efi_print_memmap(); -} - -static int __init setup_fake_mem(char *p) -{ - u64 start = 0, mem_size = 0, attribute = 0; - int i; - - if (!p) - return -EINVAL; - - while (*p != '\0') { - mem_size = memparse(p, &p); - if (*p == '@') - start = memparse(p+1, &p); - else - break; - - if (*p == ':') - attribute = simple_strtoull(p+1, &p, 0); - else - break; - - if (nr_fake_mem >= EFI_MAX_FAKEMEM) - break; - - efi_fake_mems[nr_fake_mem].range.start = start; - efi_fake_mems[nr_fake_mem].range.end = start + mem_size - 1; - efi_fake_mems[nr_fake_mem].attribute = attribute; - nr_fake_mem++; - - if (*p == ',') - p++; - } - - sort(efi_fake_mems, nr_fake_mem, sizeof(struct efi_mem_range), - cmp_fake_mem, NULL); - - for (i = 0; i < nr_fake_mem; i++) - pr_info("efi_fake_mem: add attr=0x%016llx to [mem 0x%016llx-0x%016llx]", - efi_fake_mems[i].attribute, efi_fake_mems[i].range.start, - efi_fake_mems[i].range.end); - - return *p == '\0' ? 0 : -EINVAL; -} - -early_param("efi_fake_mem", setup_fake_mem); diff --git a/drivers/firmware/efi/fake_mem.h b/drivers/firmware/efi/fake_mem.h deleted file mode 100644 index d52791af4b18..000000000000 --- a/drivers/firmware/efi/fake_mem.h +++ /dev/null @@ -1,10 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef __EFI_FAKE_MEM_H__ -#define __EFI_FAKE_MEM_H__ -#include <asm/efi.h> - -#define EFI_MAX_FAKEMEM CONFIG_EFI_MAX_FAKE_MEM - -extern struct efi_mem_range efi_fake_mems[EFI_MAX_FAKEMEM]; -extern int nr_fake_mem; -#endif /* __EFI_FAKE_MEM_H__ */ diff --git a/drivers/firmware/efi/fdtparams.c b/drivers/firmware/efi/fdtparams.c index e901f8564ca0..0ec83ba58097 100644 --- a/drivers/firmware/efi/fdtparams.c +++ b/drivers/firmware/efi/fdtparams.c @@ -30,11 +30,13 @@ static __initconst const char name[][22] = { static __initconst const struct { const char path[17]; + u8 paravirt; const char params[PARAMCOUNT][26]; } dt_params[] = { { #ifdef CONFIG_XEN // <-------17------> .path = "/hypervisor/uefi", + .paravirt = 1, .params = { [SYSTAB] = "xen,uefi-system-table", [MMBASE] = "xen,uefi-mmap-start", @@ -121,6 +123,8 @@ u64 __init efi_get_fdt_params(struct efi_memory_map_data *mm) pr_err("Can't find property '%s' in DT!\n", pname); return 0; } + if (dt_params[i].paravirt) + set_bit(EFI_PARAVIRT, &efi.flags); return systab; } notfound: diff --git a/drivers/firmware/efi/libstub/Makefile b/drivers/firmware/efi/libstub/Makefile index 453b67582fee..be8b8c6e8b40 100644 --- a/drivers/firmware/efi/libstub/Makefile +++ b/drivers/firmware/efi/libstub/Makefile @@ -5,6 +5,10 @@ # things like ftrace and stack-protector are likely to cause trouble if left # enabled, even if doing so doesn't break the build. # + +# non-x86 reuses KBUILD_CFLAGS, x86 does not +cflags-y := $(KBUILD_CFLAGS) + cflags-$(CONFIG_X86_32) := -march=i386 cflags-$(CONFIG_X86_64) := -mcmodel=small cflags-$(CONFIG_X86) += -m$(BITS) -D__KERNEL__ \ @@ -18,21 +22,20 @@ cflags-$(CONFIG_X86) += -m$(BITS) -D__KERNEL__ \ # arm64 uses the full KBUILD_CFLAGS so it's necessary to explicitly # disable the stackleak plugin -cflags-$(CONFIG_ARM64) := $(subst $(CC_FLAGS_FTRACE),,$(KBUILD_CFLAGS)) \ - -fpie $(DISABLE_STACKLEAK_PLUGIN) \ +cflags-$(CONFIG_ARM64) += -fpie $(DISABLE_STACKLEAK_PLUGIN) \ -fno-unwind-tables -fno-asynchronous-unwind-tables \ $(call cc-option,-mbranch-protection=none) -cflags-$(CONFIG_ARM) := $(subst $(CC_FLAGS_FTRACE),,$(KBUILD_CFLAGS)) \ - -fno-builtin -fpic \ +cflags-$(CONFIG_ARM) += -DEFI_HAVE_STRLEN -DEFI_HAVE_STRNLEN \ + -DEFI_HAVE_MEMCHR -DEFI_HAVE_STRRCHR \ + -DEFI_HAVE_STRCMP -fno-builtin -fpic \ $(call cc-option,-mno-single-pic-base) -cflags-$(CONFIG_RISCV) := $(subst $(CC_FLAGS_FTRACE),,$(KBUILD_CFLAGS)) \ - -fpic -cflags-$(CONFIG_LOONGARCH) := $(subst $(CC_FLAGS_FTRACE),,$(KBUILD_CFLAGS)) \ - -fpie +cflags-$(CONFIG_RISCV) += -fpic +cflags-$(CONFIG_LOONGARCH) += -fpie cflags-$(CONFIG_EFI_PARAMS_FROM_FDT) += -I$(srctree)/scripts/dtc/libfdt -KBUILD_CFLAGS := $(cflags-y) -Os -DDISABLE_BRANCH_PROFILING \ +KBUILD_CFLAGS := $(subst $(CC_FLAGS_FTRACE),,$(cflags-y)) \ + -Os -DDISABLE_BRANCH_PROFILING \ -include $(srctree)/include/linux/hidden.h \ -D__NO_FORTIFY \ -ffreestanding \ @@ -68,7 +71,7 @@ KCOV_INSTRUMENT := n lib-y := efi-stub-helper.o gop.o secureboot.o tpm.o \ file.o mem.o random.o randomalloc.o pci.o \ skip_spaces.o lib-cmdline.o lib-ctype.o \ - alignedmem.o relocate.o vsprintf.o + alignedmem.o relocate.o printk.o vsprintf.o # include the stub's libfdt dependencies from lib/ when needed libfdt-deps := fdt_rw.c fdt_ro.c fdt_wip.c fdt.c \ @@ -80,13 +83,14 @@ lib-$(CONFIG_EFI_PARAMS_FROM_FDT) += fdt.o \ $(obj)/lib-%.o: $(srctree)/lib/%.c FORCE $(call if_changed_rule,cc_o_c) -lib-$(CONFIG_EFI_GENERIC_STUB) += efi-stub.o string.o intrinsics.o systable.o +lib-$(CONFIG_EFI_GENERIC_STUB) += efi-stub.o string.o intrinsics.o systable.o \ + screen_info.o efi-stub-entry.o lib-$(CONFIG_ARM) += arm32-stub.o -lib-$(CONFIG_ARM64) += arm64-stub.o smbios.o +lib-$(CONFIG_ARM64) += arm64.o arm64-stub.o arm64-entry.o smbios.o lib-$(CONFIG_X86) += x86-stub.o -lib-$(CONFIG_RISCV) += riscv-stub.o -lib-$(CONFIG_LOONGARCH) += loongarch-stub.o +lib-$(CONFIG_RISCV) += riscv.o riscv-stub.o +lib-$(CONFIG_LOONGARCH) += loongarch.o loongarch-stub.o CFLAGS_arm32-stub.o := -DTEXT_OFFSET=$(TEXT_OFFSET) @@ -137,7 +141,7 @@ STUBCOPY_RELOC-$(CONFIG_ARM) := R_ARM_ABS # STUBCOPY_FLAGS-$(CONFIG_ARM64) += --prefix-alloc-sections=.init \ --prefix-symbols=__efistub_ -STUBCOPY_RELOC-$(CONFIG_ARM64) := R_AARCH64_ABS +STUBCOPY_RELOC-$(CONFIG_ARM64) := R_AARCH64_ABS64 # For RISC-V, we don't need anything special other than arm64. Keep all the # symbols in .init section and make sure that no absolute symbols references diff --git a/drivers/firmware/efi/libstub/Makefile.zboot b/drivers/firmware/efi/libstub/Makefile.zboot index 3340b385a05b..43e9a4cab9f5 100644 --- a/drivers/firmware/efi/libstub/Makefile.zboot +++ b/drivers/firmware/efi/libstub/Makefile.zboot @@ -10,18 +10,17 @@ comp-type-$(CONFIG_KERNEL_LZO) := lzo comp-type-$(CONFIG_KERNEL_XZ) := xzkern comp-type-$(CONFIG_KERNEL_ZSTD) := zstd22 -# in GZIP, the appended le32 carrying the uncompressed size is part of the -# format, but in other cases, we just append it at the end for convenience, -# causing the original tools to complain when checking image integrity. -# So disregard it when calculating the payload size in the zimage header. -zboot-method-y := $(comp-type-y)_with_size -zboot-size-len-y := 4 - -zboot-method-$(CONFIG_KERNEL_GZIP) := gzip -zboot-size-len-$(CONFIG_KERNEL_GZIP) := 0 +# Copy the SizeOfHeaders, SizeOfCode and SizeOfImage fields from the payload to +# the end of the compressed image. Note that this presupposes a PE header +# offset of 64 bytes, which is what arm64, RISC-V and LoongArch use. +quiet_cmd_compwithsize = $(quiet_cmd_$(comp-type-y)) + cmd_compwithsize = $(cmd_$(comp-type-y)) && ( \ + dd status=none if=$< bs=4 count=1 skip=37 ; \ + dd status=none if=$< bs=4 count=1 skip=23 ; \ + dd status=none if=$< bs=4 count=1 skip=36 ) >> $@ $(obj)/vmlinuz: $(obj)/$(EFI_ZBOOT_PAYLOAD) FORCE - $(call if_changed,$(zboot-method-y)) + $(call if_changed,compwithsize) OBJCOPYFLAGS_vmlinuz.o := -I binary -O $(EFI_ZBOOT_BFD_TARGET) \ --rename-section .data=.gzdata,load,alloc,readonly,contents @@ -30,7 +29,6 @@ $(obj)/vmlinuz.o: $(obj)/vmlinuz FORCE AFLAGS_zboot-header.o += -DMACHINE_TYPE=IMAGE_FILE_MACHINE_$(EFI_ZBOOT_MACH_TYPE) \ -DZBOOT_EFI_PATH="\"$(realpath $(obj)/vmlinuz.efi.elf)\"" \ - -DZBOOT_SIZE_LEN=$(zboot-size-len-y) \ -DCOMP_TYPE="\"$(comp-type-y)\"" $(obj)/zboot-header.o: $(srctree)/drivers/firmware/efi/libstub/zboot-header.S FORCE @@ -46,4 +44,4 @@ OBJCOPYFLAGS_vmlinuz.efi := -O binary $(obj)/vmlinuz.efi: $(obj)/vmlinuz.efi.elf FORCE $(call if_changed,objcopy) -targets += zboot-header.o vmlinuz vmlinuz.o vmlinuz.efi.elf vmlinuz.efi +targets += zboot-header.o vmlinuz.o vmlinuz.efi.elf vmlinuz.efi diff --git a/drivers/firmware/efi/libstub/alignedmem.c b/drivers/firmware/efi/libstub/alignedmem.c index 1de9878ddd3a..6b83c492c3b8 100644 --- a/drivers/firmware/efi/libstub/alignedmem.c +++ b/drivers/firmware/efi/libstub/alignedmem.c @@ -22,12 +22,15 @@ * Return: status code */ efi_status_t efi_allocate_pages_aligned(unsigned long size, unsigned long *addr, - unsigned long max, unsigned long align) + unsigned long max, unsigned long align, + int memory_type) { efi_physical_addr_t alloc_addr; efi_status_t status; int slack; + max = min(max, EFI_ALLOC_LIMIT); + if (align < EFI_ALLOC_ALIGN) align = EFI_ALLOC_ALIGN; @@ -36,7 +39,7 @@ efi_status_t efi_allocate_pages_aligned(unsigned long size, unsigned long *addr, slack = align / EFI_PAGE_SIZE - 1; status = efi_bs_call(allocate_pages, EFI_ALLOCATE_MAX_ADDRESS, - EFI_LOADER_DATA, size / EFI_PAGE_SIZE + slack, + memory_type, size / EFI_PAGE_SIZE + slack, &alloc_addr); if (status != EFI_SUCCESS) return status; diff --git a/drivers/firmware/efi/libstub/arm32-stub.c b/drivers/firmware/efi/libstub/arm32-stub.c index 0131e3aaa605..1073dd947516 100644 --- a/drivers/firmware/efi/libstub/arm32-stub.c +++ b/drivers/firmware/efi/libstub/arm32-stub.c @@ -76,43 +76,6 @@ void efi_handle_post_ebs_state(void) &efi_entry_state->sctlr_after_ebs); } -static efi_guid_t screen_info_guid = LINUX_EFI_ARM_SCREEN_INFO_TABLE_GUID; - -struct screen_info *alloc_screen_info(void) -{ - struct screen_info *si; - efi_status_t status; - - /* - * Unlike on arm64, where we can directly fill out the screen_info - * structure from the stub, we need to allocate a buffer to hold - * its contents while we hand over to the kernel proper from the - * decompressor. - */ - status = efi_bs_call(allocate_pool, EFI_RUNTIME_SERVICES_DATA, - sizeof(*si), (void **)&si); - - if (status != EFI_SUCCESS) - return NULL; - - status = efi_bs_call(install_configuration_table, - &screen_info_guid, si); - if (status == EFI_SUCCESS) - return si; - - efi_bs_call(free_pool, si); - return NULL; -} - -void free_screen_info(struct screen_info *si) -{ - if (!si) - return; - - efi_bs_call(install_configuration_table, &screen_info_guid, NULL); - efi_bs_call(free_pool, si); -} - efi_status_t handle_kernel_image(unsigned long *image_addr, unsigned long *image_size, unsigned long *reserve_addr, diff --git a/drivers/firmware/efi/libstub/arm64-entry.S b/drivers/firmware/efi/libstub/arm64-entry.S new file mode 100644 index 000000000000..b5c17e89a4fc --- /dev/null +++ b/drivers/firmware/efi/libstub/arm64-entry.S @@ -0,0 +1,67 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * EFI entry point. + * + * Copyright (C) 2013, 2014 Red Hat, Inc. + * Author: Mark Salter <msalter@redhat.com> + */ +#include <linux/linkage.h> +#include <asm/assembler.h> + + /* + * The entrypoint of a arm64 bare metal image is at offset #0 of the + * image, so this is a reasonable default for primary_entry_offset. + * Only when the EFI stub is integrated into the core kernel, it is not + * guaranteed that the PE/COFF header has been copied to memory too, so + * in this case, primary_entry_offset should be overridden by the + * linker and point to primary_entry() directly. + */ + .weak primary_entry_offset + +SYM_CODE_START(efi_enter_kernel) + /* + * efi_pe_entry() will have copied the kernel image if necessary and we + * end up here with device tree address in x1 and the kernel entry + * point stored in x0. Save those values in registers which are + * callee preserved. + */ + ldr w2, =primary_entry_offset + add x19, x0, x2 // relocated Image entrypoint + + mov x0, x1 // DTB address + mov x1, xzr + mov x2, xzr + mov x3, xzr + + /* + * Clean the remainder of this routine to the PoC + * so that we can safely disable the MMU and caches. + */ + adr x4, 1f + dc civac, x4 + dsb sy + + /* Turn off Dcache and MMU */ + mrs x4, CurrentEL + cmp x4, #CurrentEL_EL2 + mrs x4, sctlr_el1 + b.ne 0f + mrs x4, sctlr_el2 +0: bic x4, x4, #SCTLR_ELx_M + bic x4, x4, #SCTLR_ELx_C + b.eq 1f + b 2f + + .balign 32 +1: pre_disable_mmu_workaround + msr sctlr_el2, x4 + isb + br x19 // jump to kernel entrypoint + +2: pre_disable_mmu_workaround + msr sctlr_el1, x4 + isb + br x19 // jump to kernel entrypoint + + .org 1b + 32 +SYM_CODE_END(efi_enter_kernel) diff --git a/drivers/firmware/efi/libstub/arm64-stub.c b/drivers/firmware/efi/libstub/arm64-stub.c index f9de5217ea65..7327b98d8e3f 100644 --- a/drivers/firmware/efi/libstub/arm64-stub.c +++ b/drivers/firmware/efi/libstub/arm64-stub.c @@ -11,52 +11,9 @@ #include <asm/efi.h> #include <asm/memory.h> #include <asm/sections.h> -#include <asm/sysreg.h> #include "efistub.h" -static bool system_needs_vamap(void) -{ - const u8 *type1_family = efi_get_smbios_string(1, family); - - /* - * Ampere Altra machines crash in SetTime() if SetVirtualAddressMap() - * has not been called prior. - */ - if (!type1_family || strcmp(type1_family, "Altra")) - return false; - - efi_warn("Working around broken SetVirtualAddressMap()\n"); - return true; -} - -efi_status_t check_platform_features(void) -{ - u64 tg; - - /* - * If we have 48 bits of VA space for TTBR0 mappings, we can map the - * UEFI runtime regions 1:1 and so calling SetVirtualAddressMap() is - * unnecessary. - */ - if (VA_BITS_MIN >= 48 && !system_needs_vamap()) - efi_novamap = true; - - /* UEFI mandates support for 4 KB granularity, no need to check */ - if (IS_ENABLED(CONFIG_ARM64_4K_PAGES)) - return EFI_SUCCESS; - - tg = (read_cpuid(ID_AA64MMFR0_EL1) >> ID_AA64MMFR0_EL1_TGRAN_SHIFT) & 0xf; - if (tg < ID_AA64MMFR0_EL1_TGRAN_SUPPORTED_MIN || tg > ID_AA64MMFR0_EL1_TGRAN_SUPPORTED_MAX) { - if (IS_ENABLED(CONFIG_ARM64_64K_PAGES)) - efi_err("This 64 KB granular kernel is not supported by your CPU\n"); - else - efi_err("This 16 KB granular kernel is not supported by your CPU\n"); - return EFI_UNSUPPORTED; - } - return EFI_SUCCESS; -} - /* * Distro versions of GRUB may ignore the BSS allocation entirely (i.e., fail * to provide space, and fail to zero it). Check for this condition by double @@ -103,16 +60,7 @@ efi_status_t handle_kernel_image(unsigned long *image_addr, efi_status_t status; unsigned long kernel_size, kernel_memsize = 0; u32 phys_seed = 0; - - /* - * Although relocatable kernels can fix up the misalignment with - * respect to MIN_KIMG_ALIGN, the resulting virtual text addresses are - * subtly out of sync with those recorded in the vmlinux when kaslr is - * disabled but the image required relocation anyway. Therefore retain - * 2M alignment if KASLR was explicitly disabled, even if it was not - * going to be activated to begin with. - */ - u64 min_kimg_align = efi_nokaslr ? MIN_KIMG_ALIGN : EFI_KIMG_ALIGN; + u64 min_kimg_align = efi_get_kimg_min_align(); if (IS_ENABLED(CONFIG_RANDOMIZE_BASE)) { efi_guid_t li_fixed_proto = LINUX_EFI_LOADED_IMAGE_FIXED_GUID; @@ -154,7 +102,8 @@ efi_status_t handle_kernel_image(unsigned long *image_addr, * locate the kernel at a randomized offset in physical memory. */ status = efi_random_alloc(*reserve_size, min_kimg_align, - reserve_addr, phys_seed); + reserve_addr, phys_seed, + EFI_LOADER_CODE); if (status != EFI_SUCCESS) efi_warn("efi_random_alloc() failed: 0x%lx\n", status); } else { @@ -164,18 +113,20 @@ efi_status_t handle_kernel_image(unsigned long *image_addr, if (status != EFI_SUCCESS) { if (!check_image_region((u64)_text, kernel_memsize)) { efi_err("FIRMWARE BUG: Image BSS overlaps adjacent EFI memory region\n"); - } else if (IS_ALIGNED((u64)_text, min_kimg_align)) { + } else if (IS_ALIGNED((u64)_text, min_kimg_align) && + (u64)_end < EFI_ALLOC_LIMIT) { /* * Just execute from wherever we were loaded by the - * UEFI PE/COFF loader if the alignment is suitable. + * UEFI PE/COFF loader if the placement is suitable. */ *image_addr = (u64)_text; *reserve_size = 0; - return EFI_SUCCESS; + goto clean_image_to_poc; } status = efi_allocate_pages_aligned(*reserve_size, reserve_addr, - ULONG_MAX, min_kimg_align); + ULONG_MAX, min_kimg_align, + EFI_LOADER_CODE); if (status != EFI_SUCCESS) { efi_err("Failed to relocate kernel\n"); @@ -187,5 +138,13 @@ efi_status_t handle_kernel_image(unsigned long *image_addr, *image_addr = *reserve_addr; memcpy((void *)*image_addr, _text, kernel_size); +clean_image_to_poc: + /* + * Clean the copied Image to the PoC, and ensure it is not shadowed by + * stale icache entries from before relocation. + */ + dcache_clean_poc(*image_addr, *image_addr + kernel_size); + asm("ic ialluis"); + return EFI_SUCCESS; } diff --git a/drivers/firmware/efi/libstub/arm64.c b/drivers/firmware/efi/libstub/arm64.c new file mode 100644 index 000000000000..ff2d18c42ee7 --- /dev/null +++ b/drivers/firmware/efi/libstub/arm64.c @@ -0,0 +1,76 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2013, 2014 Linaro Ltd; <roy.franz@linaro.org> + * + * This file implements the EFI boot stub for the arm64 kernel. + * Adapted from ARM version by Mark Salter <msalter@redhat.com> + */ + + +#include <linux/efi.h> +#include <asm/efi.h> +#include <asm/memory.h> +#include <asm/sysreg.h> + +#include "efistub.h" + +static bool system_needs_vamap(void) +{ + const u8 *type1_family = efi_get_smbios_string(1, family); + + /* + * Ampere Altra machines crash in SetTime() if SetVirtualAddressMap() + * has not been called prior. + */ + if (!type1_family || strcmp(type1_family, "Altra")) + return false; + + efi_warn("Working around broken SetVirtualAddressMap()\n"); + return true; +} + +efi_status_t check_platform_features(void) +{ + u64 tg; + + /* + * If we have 48 bits of VA space for TTBR0 mappings, we can map the + * UEFI runtime regions 1:1 and so calling SetVirtualAddressMap() is + * unnecessary. + */ + if (VA_BITS_MIN >= 48 && !system_needs_vamap()) + efi_novamap = true; + + /* UEFI mandates support for 4 KB granularity, no need to check */ + if (IS_ENABLED(CONFIG_ARM64_4K_PAGES)) + return EFI_SUCCESS; + + tg = (read_cpuid(ID_AA64MMFR0_EL1) >> ID_AA64MMFR0_EL1_TGRAN_SHIFT) & 0xf; + if (tg < ID_AA64MMFR0_EL1_TGRAN_SUPPORTED_MIN || tg > ID_AA64MMFR0_EL1_TGRAN_SUPPORTED_MAX) { + if (IS_ENABLED(CONFIG_ARM64_64K_PAGES)) + efi_err("This 64 KB granular kernel is not supported by your CPU\n"); + else + efi_err("This 16 KB granular kernel is not supported by your CPU\n"); + return EFI_UNSUPPORTED; + } + return EFI_SUCCESS; +} + +void efi_cache_sync_image(unsigned long image_base, + unsigned long alloc_size, + unsigned long code_size) +{ + u32 ctr = read_cpuid_effective_cachetype(); + u64 lsize = 4 << cpuid_feature_extract_unsigned_field(ctr, + CTR_EL0_DminLine_SHIFT); + + do { + asm("dc civac, %0" :: "r"(image_base)); + image_base += lsize; + alloc_size -= lsize; + } while (alloc_size >= lsize); + + asm("ic ialluis"); + dsb(ish); + isb(); +} diff --git a/drivers/firmware/efi/libstub/efi-stub-entry.c b/drivers/firmware/efi/libstub/efi-stub-entry.c new file mode 100644 index 000000000000..5245c4f031c0 --- /dev/null +++ b/drivers/firmware/efi/libstub/efi-stub-entry.c @@ -0,0 +1,65 @@ +// SPDX-License-Identifier: GPL-2.0-only + +#include <linux/efi.h> +#include <asm/efi.h> + +#include "efistub.h" + +/* + * EFI entry point for the generic EFI stub used by ARM, arm64, RISC-V and + * LoongArch. This is the entrypoint that is described in the PE/COFF header + * of the core kernel. + */ +efi_status_t __efiapi efi_pe_entry(efi_handle_t handle, + efi_system_table_t *systab) +{ + efi_loaded_image_t *image; + efi_status_t status; + unsigned long image_addr; + unsigned long image_size = 0; + /* addr/point and size pairs for memory management*/ + char *cmdline_ptr = NULL; + efi_guid_t loaded_image_proto = LOADED_IMAGE_PROTOCOL_GUID; + unsigned long reserve_addr = 0; + unsigned long reserve_size = 0; + + WRITE_ONCE(efi_system_table, systab); + + /* Check if we were booted by the EFI firmware */ + if (efi_system_table->hdr.signature != EFI_SYSTEM_TABLE_SIGNATURE) + return EFI_INVALID_PARAMETER; + + /* + * Get a handle to the loaded image protocol. This is used to get + * information about the running image, such as size and the command + * line. + */ + status = efi_bs_call(handle_protocol, handle, &loaded_image_proto, + (void *)&image); + if (status != EFI_SUCCESS) { + efi_err("Failed to get loaded image protocol\n"); + return status; + } + + status = efi_handle_cmdline(image, &cmdline_ptr); + if (status != EFI_SUCCESS) + return status; + + efi_info("Booting Linux Kernel...\n"); + + status = handle_kernel_image(&image_addr, &image_size, + &reserve_addr, + &reserve_size, + image, handle); + if (status != EFI_SUCCESS) { + efi_err("Failed to relocate kernel\n"); + return status; + } + + status = efi_stub_common(handle, image, image_addr, cmdline_ptr); + + efi_free(image_size, image_addr); + efi_free(reserve_size, reserve_addr); + + return status; +} diff --git a/drivers/firmware/efi/libstub/efi-stub-helper.c b/drivers/firmware/efi/libstub/efi-stub-helper.c index 0c493521b25b..f5a4bdacac64 100644 --- a/drivers/firmware/efi/libstub/efi-stub-helper.c +++ b/drivers/firmware/efi/libstub/efi-stub-helper.c @@ -9,10 +9,8 @@ #include <linux/stdarg.h> -#include <linux/ctype.h> #include <linux/efi.h> #include <linux/kernel.h> -#include <linux/printk.h> /* For CONSOLE_LOGLEVEL_* */ #include <asm/efi.h> #include <asm/setup.h> @@ -20,7 +18,6 @@ bool efi_nochunk; bool efi_nokaslr = !IS_ENABLED(CONFIG_RANDOMIZE_BASE); -int efi_loglevel = CONSOLE_LOGLEVEL_DEFAULT; bool efi_novamap; static bool efi_noinitrd; @@ -33,146 +30,6 @@ bool __pure __efi_soft_reserve_enabled(void) } /** - * efi_char16_puts() - Write a UCS-2 encoded string to the console - * @str: UCS-2 encoded string - */ -void efi_char16_puts(efi_char16_t *str) -{ - efi_call_proto(efi_table_attr(efi_system_table, con_out), - output_string, str); -} - -static -u32 utf8_to_utf32(const u8 **s8) -{ - u32 c32; - u8 c0, cx; - size_t clen, i; - - c0 = cx = *(*s8)++; - /* - * The position of the most-significant 0 bit gives us the length of - * a multi-octet encoding. - */ - for (clen = 0; cx & 0x80; ++clen) - cx <<= 1; - /* - * If the 0 bit is in position 8, this is a valid single-octet - * encoding. If the 0 bit is in position 7 or positions 1-3, the - * encoding is invalid. - * In either case, we just return the first octet. - */ - if (clen < 2 || clen > 4) - return c0; - /* Get the bits from the first octet. */ - c32 = cx >> clen--; - for (i = 0; i < clen; ++i) { - /* Trailing octets must have 10 in most significant bits. */ - cx = (*s8)[i] ^ 0x80; - if (cx & 0xc0) - return c0; - c32 = (c32 << 6) | cx; - } - /* - * Check for validity: - * - The character must be in the Unicode range. - * - It must not be a surrogate. - * - It must be encoded using the correct number of octets. - */ - if (c32 > 0x10ffff || - (c32 & 0xf800) == 0xd800 || - clen != (c32 >= 0x80) + (c32 >= 0x800) + (c32 >= 0x10000)) - return c0; - *s8 += clen; - return c32; -} - -/** - * efi_puts() - Write a UTF-8 encoded string to the console - * @str: UTF-8 encoded string - */ -void efi_puts(const char *str) -{ - efi_char16_t buf[128]; - size_t pos = 0, lim = ARRAY_SIZE(buf); - const u8 *s8 = (const u8 *)str; - u32 c32; - - while (*s8) { - if (*s8 == '\n') - buf[pos++] = L'\r'; - c32 = utf8_to_utf32(&s8); - if (c32 < 0x10000) { - /* Characters in plane 0 use a single word. */ - buf[pos++] = c32; - } else { - /* - * Characters in other planes encode into a surrogate - * pair. - */ - buf[pos++] = (0xd800 - (0x10000 >> 10)) + (c32 >> 10); - buf[pos++] = 0xdc00 + (c32 & 0x3ff); - } - if (*s8 == '\0' || pos >= lim - 2) { - buf[pos] = L'\0'; - efi_char16_puts(buf); - pos = 0; - } - } -} - -/** - * efi_printk() - Print a kernel message - * @fmt: format string - * - * The first letter of the format string is used to determine the logging level - * of the message. If the level is less then the current EFI logging level, the - * message is suppressed. The message will be truncated to 255 bytes. - * - * Return: number of printed characters - */ -int efi_printk(const char *fmt, ...) -{ - char printf_buf[256]; - va_list args; - int printed; - int loglevel = printk_get_level(fmt); - - switch (loglevel) { - case '0' ... '9': - loglevel -= '0'; - break; - default: - /* - * Use loglevel -1 for cases where we just want to print to - * the screen. - */ - loglevel = -1; - break; - } - - if (loglevel >= efi_loglevel) - return 0; - - if (loglevel >= 0) - efi_puts("EFI stub: "); - - fmt = printk_skip_level(fmt); - - va_start(args, fmt); - printed = vsnprintf(printf_buf, sizeof(printf_buf), fmt, args); - va_end(args); - - efi_puts(printf_buf); - if (printed >= sizeof(printf_buf)) { - efi_puts("[Message truncated]\n"); - return -1; - } - - return printed; -} - -/** * efi_parse_options() - Parse EFI command line options * @cmdline: kernel command line * @@ -626,8 +483,8 @@ static const struct { /** * efi_load_initrd_dev_path() - load the initrd from the Linux initrd device path - * @load_addr: pointer to store the address where the initrd was loaded - * @load_size: pointer to store the size of the loaded initrd + * @initrd: pointer of struct to store the address where the initrd was loaded + * and the size of the loaded initrd * @max: upper limit for the initrd memory allocation * * Return: @@ -681,8 +538,7 @@ efi_status_t efi_load_initrd_cmdline(efi_loaded_image_t *image, unsigned long soft_limit, unsigned long hard_limit) { - if (!IS_ENABLED(CONFIG_EFI_GENERIC_STUB_INITRD_CMDLINE_LOADER) || - (IS_ENABLED(CONFIG_X86) && (!efi_is_native() || image == NULL))) + if (image == NULL) return EFI_UNSUPPORTED; return handle_cmdline_files(image, L"initrd=", sizeof(L"initrd=") - 2, diff --git a/drivers/firmware/efi/libstub/efi-stub.c b/drivers/firmware/efi/libstub/efi-stub.c index cf474f0dd261..2955c1ac6a36 100644 --- a/drivers/firmware/efi/libstub/efi-stub.c +++ b/drivers/firmware/efi/libstub/efi-stub.c @@ -35,15 +35,6 @@ * as well to minimize the code churn. */ #define EFI_RT_VIRTUAL_BASE SZ_512M -#define EFI_RT_VIRTUAL_SIZE SZ_512M - -#ifdef CONFIG_ARM64 -# define EFI_RT_VIRTUAL_LIMIT DEFAULT_MAP_WINDOW_64 -#elif defined(CONFIG_RISCV) || defined(CONFIG_LOONGARCH) -# define EFI_RT_VIRTUAL_LIMIT TASK_SIZE_MIN -#else /* Only if TASK_SIZE is a constant */ -# define EFI_RT_VIRTUAL_LIMIT TASK_SIZE -#endif /* * Some architectures map the EFI regions into the kernel's linear map using a @@ -56,6 +47,15 @@ static u64 virtmap_base = EFI_RT_VIRTUAL_BASE; static bool flat_va_mapping = (EFI_RT_VIRTUAL_OFFSET != 0); +struct screen_info * __weak alloc_screen_info(void) +{ + return &screen_info; +} + +void __weak free_screen_info(struct screen_info *si) +{ +} + static struct screen_info *setup_graphics(void) { efi_guid_t gop_proto = EFI_GRAPHICS_OUTPUT_PROTOCOL_GUID; @@ -115,62 +115,21 @@ static u32 get_supported_rt_services(void) return supported; } -/* - * EFI entry point for the arm/arm64 EFI stubs. This is the entrypoint - * that is described in the PE/COFF header. Most of the code is the same - * for both archictectures, with the arch-specific code provided in the - * handle_kernel_image() function. - */ -efi_status_t __efiapi efi_pe_entry(efi_handle_t handle, - efi_system_table_t *sys_table_arg) +efi_status_t efi_handle_cmdline(efi_loaded_image_t *image, char **cmdline_ptr) { - efi_loaded_image_t *image; - efi_status_t status; - unsigned long image_addr; - unsigned long image_size = 0; - /* addr/point and size pairs for memory management*/ - char *cmdline_ptr = NULL; int cmdline_size = 0; - efi_guid_t loaded_image_proto = LOADED_IMAGE_PROTOCOL_GUID; - unsigned long reserve_addr = 0; - unsigned long reserve_size = 0; - struct screen_info *si; - efi_properties_table_t *prop_tbl; - - efi_system_table = sys_table_arg; - - /* Check if we were booted by the EFI firmware */ - if (efi_system_table->hdr.signature != EFI_SYSTEM_TABLE_SIGNATURE) { - status = EFI_INVALID_PARAMETER; - goto fail; - } - - status = check_platform_features(); - if (status != EFI_SUCCESS) - goto fail; - - /* - * Get a handle to the loaded image protocol. This is used to get - * information about the running image, such as size and the command - * line. - */ - status = efi_bs_call(handle_protocol, handle, &loaded_image_proto, - (void *)&image); - if (status != EFI_SUCCESS) { - efi_err("Failed to get loaded image protocol\n"); - goto fail; - } + efi_status_t status; + char *cmdline; /* * Get the command line from EFI, using the LOADED_IMAGE * protocol. We are going to copy the command line into the * device tree, so this can be allocated anywhere. */ - cmdline_ptr = efi_convert_cmdline(image, &cmdline_size); - if (!cmdline_ptr) { + cmdline = efi_convert_cmdline(image, &cmdline_size); + if (!cmdline) { efi_err("getting command line via LOADED_IMAGE_PROTOCOL\n"); - status = EFI_OUT_OF_RESOURCES; - goto fail; + return EFI_OUT_OF_RESOURCES; } if (IS_ENABLED(CONFIG_CMDLINE_EXTEND) || @@ -184,25 +143,34 @@ efi_status_t __efiapi efi_pe_entry(efi_handle_t handle, } if (!IS_ENABLED(CONFIG_CMDLINE_FORCE) && cmdline_size > 0) { - status = efi_parse_options(cmdline_ptr); + status = efi_parse_options(cmdline); if (status != EFI_SUCCESS) { efi_err("Failed to parse options\n"); goto fail_free_cmdline; } } - efi_info("Booting Linux Kernel...\n"); + *cmdline_ptr = cmdline; + return EFI_SUCCESS; - si = setup_graphics(); +fail_free_cmdline: + efi_bs_call(free_pool, cmdline_ptr); + return status; +} - status = handle_kernel_image(&image_addr, &image_size, - &reserve_addr, - &reserve_size, - image, handle); - if (status != EFI_SUCCESS) { - efi_err("Failed to relocate kernel\n"); - goto fail_free_screeninfo; - } +efi_status_t efi_stub_common(efi_handle_t handle, + efi_loaded_image_t *image, + unsigned long image_addr, + char *cmdline_ptr) +{ + struct screen_info *si; + efi_status_t status; + + status = check_platform_features(); + if (status != EFI_SUCCESS) + return status; + + si = setup_graphics(); efi_retrieve_tpm2_eventlog(); @@ -214,53 +182,15 @@ efi_status_t __efiapi efi_pe_entry(efi_handle_t handle, efi_random_get_seed(); - /* - * If the NX PE data feature is enabled in the properties table, we - * should take care not to create a virtual mapping that changes the - * relative placement of runtime services code and data regions, as - * they may belong to the same PE/COFF executable image in memory. - * The easiest way to achieve that is to simply use a 1:1 mapping. - */ - prop_tbl = get_efi_config_table(EFI_PROPERTIES_TABLE_GUID); - flat_va_mapping |= prop_tbl && - (prop_tbl->memory_protection_attribute & - EFI_PROPERTIES_RUNTIME_MEMORY_PROTECTION_NON_EXECUTABLE_PE_DATA); - /* force efi_novamap if SetVirtualAddressMap() is unsupported */ efi_novamap |= !(get_supported_rt_services() & EFI_RT_SUPPORTED_SET_VIRTUAL_ADDRESS_MAP); - /* hibernation expects the runtime regions to stay in the same place */ - if (!IS_ENABLED(CONFIG_HIBERNATION) && !efi_nokaslr && !flat_va_mapping) { - /* - * Randomize the base of the UEFI runtime services region. - * Preserve the 2 MB alignment of the region by taking a - * shift of 21 bit positions into account when scaling - * the headroom value using a 32-bit random value. - */ - static const u64 headroom = EFI_RT_VIRTUAL_LIMIT - - EFI_RT_VIRTUAL_BASE - - EFI_RT_VIRTUAL_SIZE; - u32 rnd; - - status = efi_get_random_bytes(sizeof(rnd), (u8 *)&rnd); - if (status == EFI_SUCCESS) { - virtmap_base = EFI_RT_VIRTUAL_BASE + - (((headroom >> 21) * rnd) >> (32 - 21)); - } - } - install_memreserve_table(); status = efi_boot_kernel(handle, image, image_addr, cmdline_ptr); - efi_free(image_size, image_addr); - efi_free(reserve_size, reserve_addr); -fail_free_screeninfo: free_screen_info(si); -fail_free_cmdline: - efi_bs_call(free_pool, cmdline_ptr); -fail: return status; } diff --git a/drivers/firmware/efi/libstub/efistub.h b/drivers/firmware/efi/libstub/efistub.h index eb03d5a9aac8..5b8f2c411ed8 100644 --- a/drivers/firmware/efi/libstub/efistub.h +++ b/drivers/firmware/efi/libstub/efistub.h @@ -29,6 +29,10 @@ #define EFI_ALLOC_ALIGN EFI_PAGE_SIZE #endif +#ifndef EFI_ALLOC_LIMIT +#define EFI_ALLOC_LIMIT ULONG_MAX +#endif + extern bool efi_nochunk; extern bool efi_nokaslr; extern int efi_loglevel; @@ -44,15 +48,23 @@ efi_status_t __efiapi efi_pe_entry(efi_handle_t handle, #ifndef ARCH_HAS_EFISTUB_WRAPPERS -#define efi_is_native() (true) -#define efi_bs_call(func, ...) efi_system_table->boottime->func(__VA_ARGS__) -#define efi_rt_call(func, ...) efi_system_table->runtime->func(__VA_ARGS__) -#define efi_dxe_call(func, ...) efi_dxe_table->func(__VA_ARGS__) -#define efi_table_attr(inst, attr) (inst->attr) -#define efi_call_proto(inst, func, ...) inst->func(inst, ##__VA_ARGS__) +#define efi_is_native() (true) +#define efi_table_attr(inst, attr) (inst)->attr +#define efi_fn_call(inst, func, ...) (inst)->func(__VA_ARGS__) #endif +#define efi_call_proto(inst, func, ...) ({ \ + __typeof__(inst) __inst = (inst); \ + efi_fn_call(__inst, func, __inst, ##__VA_ARGS__); \ +}) +#define efi_bs_call(func, ...) \ + efi_fn_call(efi_table_attr(efi_system_table, boottime), func, ##__VA_ARGS__) +#define efi_rt_call(func, ...) \ + efi_fn_call(efi_table_attr(efi_system_table, runtime), func, ##__VA_ARGS__) +#define efi_dxe_call(func, ...) \ + efi_fn_call(efi_dxe_table, func, ##__VA_ARGS__) + #define efi_info(fmt, ...) \ efi_printk(KERN_INFO fmt, ##__VA_ARGS__) #define efi_warn(fmt, ...) \ @@ -179,6 +191,21 @@ union efi_device_path_to_text_protocol { typedef union efi_device_path_to_text_protocol efi_device_path_to_text_protocol_t; +union efi_device_path_from_text_protocol { + struct { + efi_device_path_protocol_t * + (__efiapi *convert_text_to_device_node)(const efi_char16_t *); + efi_device_path_protocol_t * + (__efiapi *convert_text_to_device_path)(const efi_char16_t *); + }; + struct { + u32 convert_text_to_device_node; + u32 convert_text_to_device_path; + } mixed_mode; +}; + +typedef union efi_device_path_from_text_protocol efi_device_path_from_text_protocol_t; + typedef void *efi_event_t; /* Note that notifications won't work in mixed mode */ typedef void (__efiapi *efi_event_notify_t)(efi_event_t, void *); @@ -572,36 +599,63 @@ typedef struct { efi_char16_t filename[]; } efi_file_info_t; -typedef struct efi_file_protocol efi_file_protocol_t; - -struct efi_file_protocol { - u64 revision; - efi_status_t (__efiapi *open) (efi_file_protocol_t *, - efi_file_protocol_t **, - efi_char16_t *, u64, u64); - efi_status_t (__efiapi *close) (efi_file_protocol_t *); - efi_status_t (__efiapi *delete) (efi_file_protocol_t *); - efi_status_t (__efiapi *read) (efi_file_protocol_t *, - unsigned long *, void *); - efi_status_t (__efiapi *write) (efi_file_protocol_t *, - unsigned long, void *); - efi_status_t (__efiapi *get_position)(efi_file_protocol_t *, u64 *); - efi_status_t (__efiapi *set_position)(efi_file_protocol_t *, u64); - efi_status_t (__efiapi *get_info) (efi_file_protocol_t *, - efi_guid_t *, unsigned long *, - void *); - efi_status_t (__efiapi *set_info) (efi_file_protocol_t *, - efi_guid_t *, unsigned long, - void *); - efi_status_t (__efiapi *flush) (efi_file_protocol_t *); +typedef union efi_file_protocol efi_file_protocol_t; + +union efi_file_protocol { + struct { + u64 revision; + efi_status_t (__efiapi *open) (efi_file_protocol_t *, + efi_file_protocol_t **, + efi_char16_t *, u64, + u64); + efi_status_t (__efiapi *close) (efi_file_protocol_t *); + efi_status_t (__efiapi *delete) (efi_file_protocol_t *); + efi_status_t (__efiapi *read) (efi_file_protocol_t *, + unsigned long *, + void *); + efi_status_t (__efiapi *write) (efi_file_protocol_t *, + unsigned long, void *); + efi_status_t (__efiapi *get_position)(efi_file_protocol_t *, + u64 *); + efi_status_t (__efiapi *set_position)(efi_file_protocol_t *, + u64); + efi_status_t (__efiapi *get_info) (efi_file_protocol_t *, + efi_guid_t *, + unsigned long *, + void *); + efi_status_t (__efiapi *set_info) (efi_file_protocol_t *, + efi_guid_t *, + unsigned long, + void *); + efi_status_t (__efiapi *flush) (efi_file_protocol_t *); + }; + struct { + u64 revision; + u32 open; + u32 close; + u32 delete; + u32 read; + u32 write; + u32 get_position; + u32 set_position; + u32 get_info; + u32 set_info; + u32 flush; + } mixed_mode; }; -typedef struct efi_simple_file_system_protocol efi_simple_file_system_protocol_t; +typedef union efi_simple_file_system_protocol efi_simple_file_system_protocol_t; -struct efi_simple_file_system_protocol { - u64 revision; - int (__efiapi *open_volume)(efi_simple_file_system_protocol_t *, - efi_file_protocol_t **); +union efi_simple_file_system_protocol { + struct { + u64 revision; + efi_status_t (__efiapi *open_volume)(efi_simple_file_system_protocol_t *, + efi_file_protocol_t **); + }; + struct { + u64 revision; + u32 open_volume; + } mixed_mode; }; #define EFI_FILE_MODE_READ 0x0000000000000001 @@ -880,7 +934,10 @@ void efi_get_virtmap(efi_memory_desc_t *memory_map, unsigned long map_size, efi_status_t efi_get_random_bytes(unsigned long size, u8 *out); efi_status_t efi_random_alloc(unsigned long size, unsigned long align, - unsigned long *addr, unsigned long random_seed); + unsigned long *addr, unsigned long random_seed, + int memory_type); + +efi_status_t efi_random_get_seed(void); efi_status_t check_platform_features(void); @@ -905,7 +962,8 @@ efi_status_t efi_allocate_pages(unsigned long size, unsigned long *addr, unsigned long max); efi_status_t efi_allocate_pages_aligned(unsigned long size, unsigned long *addr, - unsigned long max, unsigned long align); + unsigned long max, unsigned long align, + int memory_type); efi_status_t efi_low_alloc_above(unsigned long size, unsigned long align, unsigned long *addr, unsigned long min); @@ -958,6 +1016,14 @@ efi_status_t handle_kernel_image(unsigned long *image_addr, efi_loaded_image_t *image, efi_handle_t image_handle); +/* shared entrypoint between the normal stub and the zboot stub */ +efi_status_t efi_stub_common(efi_handle_t handle, + efi_loaded_image_t *image, + unsigned long image_addr, + char *cmdline_ptr); + +efi_status_t efi_handle_cmdline(efi_loaded_image_t *image, char **cmdline_ptr); + asmlinkage void __noreturn efi_enter_kernel(unsigned long entrypoint, unsigned long fdt_addr, unsigned long fdt_size); @@ -975,6 +1041,13 @@ efi_enable_reset_attack_mitigation(void) { } void efi_retrieve_tpm2_eventlog(void); +struct screen_info *alloc_screen_info(void); +void free_screen_info(struct screen_info *si); + +void efi_cache_sync_image(unsigned long image_base, + unsigned long alloc_size, + unsigned long code_size); + struct efi_smbios_record { u8 type; u8 length; diff --git a/drivers/firmware/efi/libstub/file.c b/drivers/firmware/efi/libstub/file.c index f756c61396e9..d6a025df07dc 100644 --- a/drivers/firmware/efi/libstub/file.c +++ b/drivers/firmware/efi/libstub/file.c @@ -43,18 +43,26 @@ static efi_status_t efi_open_file(efi_file_protocol_t *volume, efi_file_protocol_t *fh; unsigned long info_sz; efi_status_t status; + efi_char16_t *c; - status = volume->open(volume, &fh, fi->filename, EFI_FILE_MODE_READ, 0); + /* Replace UNIX dir separators with EFI standard ones */ + for (c = fi->filename; *c != L'\0'; c++) { + if (*c == L'/') + *c = L'\\'; + } + + status = efi_call_proto(volume, open, &fh, fi->filename, + EFI_FILE_MODE_READ, 0); if (status != EFI_SUCCESS) { efi_err("Failed to open file: %ls\n", fi->filename); return status; } info_sz = sizeof(struct finfo); - status = fh->get_info(fh, &info_guid, &info_sz, fi); + status = efi_call_proto(fh, get_info, &info_guid, &info_sz, fi); if (status != EFI_SUCCESS) { efi_err("Failed to get file info\n"); - fh->close(fh); + efi_call_proto(fh, close); return status; } @@ -66,36 +74,18 @@ static efi_status_t efi_open_file(efi_file_protocol_t *volume, static efi_status_t efi_open_volume(efi_loaded_image_t *image, efi_file_protocol_t **fh) { - struct efi_vendor_dev_path *dp = image->file_path; - efi_guid_t li_proto = LOADED_IMAGE_PROTOCOL_GUID; efi_guid_t fs_proto = EFI_FILE_SYSTEM_GUID; efi_simple_file_system_protocol_t *io; efi_status_t status; - // If we are using EFI zboot, we should look for the file system - // protocol on the parent image's handle instead - if (IS_ENABLED(CONFIG_EFI_ZBOOT) && - image->parent_handle != NULL && - dp != NULL && - dp->header.type == EFI_DEV_MEDIA && - dp->header.sub_type == EFI_DEV_MEDIA_VENDOR && - !efi_guidcmp(dp->vendorguid, LINUX_EFI_ZBOOT_MEDIA_GUID)) { - status = efi_bs_call(handle_protocol, image->parent_handle, - &li_proto, (void *)&image); - if (status != EFI_SUCCESS) { - efi_err("Failed to locate parent image handle\n"); - return status; - } - } - - status = efi_bs_call(handle_protocol, image->device_handle, &fs_proto, - (void **)&io); + status = efi_bs_call(handle_protocol, efi_table_attr(image, device_handle), + &fs_proto, (void **)&io); if (status != EFI_SUCCESS) { efi_err("Failed to handle fs_proto\n"); return status; } - status = io->open_volume(io, fh); + status = efi_call_proto(io, open_volume, fh); if (status != EFI_SUCCESS) efi_err("Failed to open volume\n"); @@ -129,16 +119,62 @@ static int find_file_option(const efi_char16_t *cmdline, int cmdline_len, if (c == L'\0' || c == L'\n' || c == L' ') break; - else if (c == L'/') - /* Replace UNIX dir separators with EFI standard ones */ - *result++ = L'\\'; - else - *result++ = c; + *result++ = c; } *result = L'\0'; return i; } +static efi_status_t efi_open_device_path(efi_file_protocol_t **volume, + struct finfo *fi) +{ + efi_guid_t text_to_dp_guid = EFI_DEVICE_PATH_FROM_TEXT_PROTOCOL_GUID; + static efi_device_path_from_text_protocol_t *text_to_dp = NULL; + efi_guid_t fs_proto = EFI_FILE_SYSTEM_GUID; + efi_device_path_protocol_t *initrd_dp; + efi_simple_file_system_protocol_t *io; + struct efi_file_path_dev_path *fpath; + efi_handle_t handle; + efi_status_t status; + + /* See if the text to device path protocol exists */ + if (!text_to_dp && + efi_bs_call(locate_protocol, &text_to_dp_guid, NULL, + (void **)&text_to_dp) != EFI_SUCCESS) + return EFI_UNSUPPORTED; + + + /* Convert the filename wide string into a device path */ + initrd_dp = efi_fn_call(text_to_dp, convert_text_to_device_path, + fi->filename); + + /* Check whether the device path in question implements simple FS */ + if ((efi_bs_call(locate_device_path, &fs_proto, &initrd_dp, &handle) ?: + efi_bs_call(handle_protocol, handle, &fs_proto, (void **)&io)) + != EFI_SUCCESS) + return EFI_NOT_FOUND; + + /* Check whether the remaining device path is a file device path */ + if (initrd_dp->type != EFI_DEV_MEDIA || + initrd_dp->sub_type != EFI_DEV_MEDIA_FILE) { + efi_warn("Unexpected device path node type: (%x, %x)\n", + initrd_dp->type, initrd_dp->sub_type); + return EFI_LOAD_ERROR; + } + + /* Copy the remaining file path into the fi structure */ + fpath = (struct efi_file_path_dev_path *)initrd_dp; + memcpy(fi->filename, fpath->filename, + min(sizeof(fi->filename), + fpath->header.length - sizeof(fpath->header))); + + status = efi_call_proto(io, open_volume, volume); + if (status != EFI_SUCCESS) + efi_err("Failed to open volume\n"); + + return status; +} + /* * Check the cmdline for a LILO-style file= arguments. * @@ -153,8 +189,8 @@ efi_status_t handle_cmdline_files(efi_loaded_image_t *image, unsigned long *load_addr, unsigned long *load_size) { - const efi_char16_t *cmdline = image->load_options; - u32 cmdline_len = image->load_options_size; + const efi_char16_t *cmdline = efi_table_attr(image, load_options); + u32 cmdline_len = efi_table_attr(image, load_options_size); unsigned long efi_chunk_size = ULONG_MAX; efi_file_protocol_t *volume = NULL; efi_file_protocol_t *file; @@ -188,11 +224,13 @@ efi_status_t handle_cmdline_files(efi_loaded_image_t *image, cmdline += offset; cmdline_len -= offset; - if (!volume) { + status = efi_open_device_path(&volume, &fi); + if (status == EFI_UNSUPPORTED || status == EFI_NOT_FOUND) + /* try the volume that holds the kernel itself */ status = efi_open_volume(image, &volume); - if (status != EFI_SUCCESS) - return status; - } + + if (status != EFI_SUCCESS) + goto err_free_alloc; status = efi_open_file(volume, &fi, &file, &size); if (status != EFI_SUCCESS) @@ -240,7 +278,7 @@ efi_status_t handle_cmdline_files(efi_loaded_image_t *image, while (size) { unsigned long chunksize = min(size, efi_chunk_size); - status = file->read(file, &chunksize, addr); + status = efi_call_proto(file, read, &chunksize, addr); if (status != EFI_SUCCESS) { efi_err("Failed to read file\n"); goto err_close_file; @@ -248,24 +286,24 @@ efi_status_t handle_cmdline_files(efi_loaded_image_t *image, addr += chunksize; size -= chunksize; } - file->close(file); + efi_call_proto(file, close); + efi_call_proto(volume, close); } while (offset > 0); *load_addr = alloc_addr; *load_size = alloc_size; - if (volume) - volume->close(volume); - if (*load_size == 0) return EFI_NOT_READY; return EFI_SUCCESS; err_close_file: - file->close(file); + efi_call_proto(file, close); err_close_volume: - volume->close(volume); + efi_call_proto(volume, close); + +err_free_alloc: efi_free(alloc_size, alloc_addr); return status; } diff --git a/drivers/firmware/efi/libstub/intrinsics.c b/drivers/firmware/efi/libstub/intrinsics.c index a04ab39292b6..965e734f6f98 100644 --- a/drivers/firmware/efi/libstub/intrinsics.c +++ b/drivers/firmware/efi/libstub/intrinsics.c @@ -28,3 +28,21 @@ void *memset(void *dst, int c, size_t len) efi_bs_call(set_mem, dst, len, c & U8_MAX); return dst; } + +/** + * memcmp - Compare two areas of memory + * @cs: One area of memory + * @ct: Another area of memory + * @count: The size of the area. + */ +#undef memcmp +int memcmp(const void *cs, const void *ct, size_t count) +{ + const unsigned char *su1, *su2; + int res = 0; + + for (su1 = cs, su2 = ct; 0 < count; ++su1, ++su2, count--) + if ((res = *su1 - *su2) != 0) + break; + return res; +} diff --git a/drivers/firmware/efi/libstub/loongarch-stub.c b/drivers/firmware/efi/libstub/loongarch-stub.c index 32329f2a92f9..eee7ed43cdfb 100644 --- a/drivers/firmware/efi/libstub/loongarch-stub.c +++ b/drivers/firmware/efi/libstub/loongarch-stub.c @@ -9,18 +9,10 @@ #include <asm/addrspace.h> #include "efistub.h" -typedef void __noreturn (*kernel_entry_t)(bool efi, unsigned long cmdline, - unsigned long systab); - extern int kernel_asize; extern int kernel_fsize; extern int kernel_offset; -extern kernel_entry_t kernel_entry; - -efi_status_t check_platform_features(void) -{ - return EFI_SUCCESS; -} +extern int kernel_entry; efi_status_t handle_kernel_image(unsigned long *image_addr, unsigned long *image_size, @@ -29,74 +21,33 @@ efi_status_t handle_kernel_image(unsigned long *image_addr, efi_loaded_image_t *image, efi_handle_t image_handle) { + int nr_pages = round_up(kernel_asize, EFI_ALLOC_ALIGN) / EFI_PAGE_SIZE; + efi_physical_addr_t kernel_addr = EFI_KIMG_PREFERRED_ADDRESS; efi_status_t status; - unsigned long kernel_addr = 0; - - kernel_addr = (unsigned long)&kernel_offset - kernel_offset; - - status = efi_relocate_kernel(&kernel_addr, kernel_fsize, kernel_asize, - PHYSADDR(VMLINUX_LOAD_ADDRESS), SZ_2M, 0x0); - - *image_addr = kernel_addr; - *image_size = kernel_asize; - - return status; -} - -struct exit_boot_struct { - efi_memory_desc_t *runtime_map; - int runtime_entry_count; -}; - -static efi_status_t exit_boot_func(struct efi_boot_memmap *map, void *priv) -{ - struct exit_boot_struct *p = priv; /* - * Update the memory map with virtual addresses. The function will also - * populate @runtime_map with copies of just the EFI_MEMORY_RUNTIME - * entries so that we can pass it straight to SetVirtualAddressMap() + * Allocate space for the kernel image at the preferred offset. This is + * the only location in memory from where we can execute the image, so + * no point in falling back to another allocation. */ - efi_get_virtmap(map->map, map->map_size, map->desc_size, - p->runtime_map, &p->runtime_entry_count); - - return EFI_SUCCESS; -} - -efi_status_t efi_boot_kernel(void *handle, efi_loaded_image_t *image, - unsigned long kernel_addr, char *cmdline_ptr) -{ - kernel_entry_t real_kernel_entry; - struct exit_boot_struct priv; - unsigned long desc_size; - efi_status_t status; - u32 desc_ver; - - status = efi_alloc_virtmap(&priv.runtime_map, &desc_size, &desc_ver); - if (status != EFI_SUCCESS) { - efi_err("Unable to retrieve UEFI memory map.\n"); - return status; - } - - efi_info("Exiting boot services\n"); - - efi_novamap = false; - status = efi_exit_boot_services(handle, &priv, exit_boot_func); + status = efi_bs_call(allocate_pages, EFI_ALLOCATE_ADDRESS, + EFI_LOADER_DATA, nr_pages, &kernel_addr); if (status != EFI_SUCCESS) return status; - /* Install the new virtual address map */ - efi_rt_call(set_virtual_address_map, - priv.runtime_entry_count * desc_size, desc_size, - desc_ver, priv.runtime_map); + *image_addr = EFI_KIMG_PREFERRED_ADDRESS; + *image_size = kernel_asize; - /* Config Direct Mapping */ - csr_write64(CSR_DMW0_INIT, LOONGARCH_CSR_DMWIN0); - csr_write64(CSR_DMW1_INIT, LOONGARCH_CSR_DMWIN1); + memcpy((void *)EFI_KIMG_PREFERRED_ADDRESS, + (void *)&kernel_offset - kernel_offset, + kernel_fsize); - real_kernel_entry = (kernel_entry_t) - ((unsigned long)&kernel_entry - kernel_addr + VMLINUX_LOAD_ADDRESS); + return status; +} + +unsigned long kernel_entry_address(void) +{ + unsigned long base = (unsigned long)&kernel_offset - kernel_offset; - real_kernel_entry(true, (unsigned long)cmdline_ptr, - (unsigned long)efi_system_table); + return (unsigned long)&kernel_entry - base + VMLINUX_LOAD_ADDRESS; } diff --git a/drivers/firmware/efi/libstub/loongarch.c b/drivers/firmware/efi/libstub/loongarch.c new file mode 100644 index 000000000000..807cba2693fc --- /dev/null +++ b/drivers/firmware/efi/libstub/loongarch.c @@ -0,0 +1,80 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Author: Yun Liu <liuyun@loongson.cn> + * Huacai Chen <chenhuacai@loongson.cn> + * Copyright (C) 2020-2022 Loongson Technology Corporation Limited + */ + +#include <asm/efi.h> +#include <asm/addrspace.h> +#include "efistub.h" + +typedef void __noreturn (*kernel_entry_t)(bool efi, unsigned long cmdline, + unsigned long systab); + +efi_status_t check_platform_features(void) +{ + return EFI_SUCCESS; +} + +struct exit_boot_struct { + efi_memory_desc_t *runtime_map; + int runtime_entry_count; +}; + +static efi_status_t exit_boot_func(struct efi_boot_memmap *map, void *priv) +{ + struct exit_boot_struct *p = priv; + + /* + * Update the memory map with virtual addresses. The function will also + * populate @runtime_map with copies of just the EFI_MEMORY_RUNTIME + * entries so that we can pass it straight to SetVirtualAddressMap() + */ + efi_get_virtmap(map->map, map->map_size, map->desc_size, + p->runtime_map, &p->runtime_entry_count); + + return EFI_SUCCESS; +} + +unsigned long __weak kernel_entry_address(void) +{ + return *(unsigned long *)(PHYSADDR(VMLINUX_LOAD_ADDRESS) + 8); +} + +efi_status_t efi_boot_kernel(void *handle, efi_loaded_image_t *image, + unsigned long kernel_addr, char *cmdline_ptr) +{ + kernel_entry_t real_kernel_entry; + struct exit_boot_struct priv; + unsigned long desc_size; + efi_status_t status; + u32 desc_ver; + + status = efi_alloc_virtmap(&priv.runtime_map, &desc_size, &desc_ver); + if (status != EFI_SUCCESS) { + efi_err("Unable to retrieve UEFI memory map.\n"); + return status; + } + + efi_info("Exiting boot services\n"); + + efi_novamap = false; + status = efi_exit_boot_services(handle, &priv, exit_boot_func); + if (status != EFI_SUCCESS) + return status; + + /* Install the new virtual address map */ + efi_rt_call(set_virtual_address_map, + priv.runtime_entry_count * desc_size, desc_size, + desc_ver, priv.runtime_map); + + /* Config Direct Mapping */ + csr_write64(CSR_DMW0_INIT, LOONGARCH_CSR_DMWIN0); + csr_write64(CSR_DMW1_INIT, LOONGARCH_CSR_DMWIN1); + + real_kernel_entry = (void *)kernel_entry_address(); + + real_kernel_entry(true, (unsigned long)cmdline_ptr, + (unsigned long)efi_system_table); +} diff --git a/drivers/firmware/efi/libstub/mem.c b/drivers/firmware/efi/libstub/mem.c index 45841ef55a9f..4f1fa302234d 100644 --- a/drivers/firmware/efi/libstub/mem.c +++ b/drivers/firmware/efi/libstub/mem.c @@ -89,9 +89,12 @@ efi_status_t efi_allocate_pages(unsigned long size, unsigned long *addr, efi_physical_addr_t alloc_addr; efi_status_t status; + max = min(max, EFI_ALLOC_LIMIT); + if (EFI_ALLOC_ALIGN > EFI_PAGE_SIZE) return efi_allocate_pages_aligned(size, addr, max, - EFI_ALLOC_ALIGN); + EFI_ALLOC_ALIGN, + EFI_LOADER_DATA); alloc_addr = ALIGN_DOWN(max + 1, EFI_ALLOC_ALIGN) - 1; status = efi_bs_call(allocate_pages, EFI_ALLOCATE_MAX_ADDRESS, diff --git a/drivers/firmware/efi/libstub/printk.c b/drivers/firmware/efi/libstub/printk.c new file mode 100644 index 000000000000..3a67a2cea7bd --- /dev/null +++ b/drivers/firmware/efi/libstub/printk.c @@ -0,0 +1,154 @@ +// SPDX-License-Identifier: GPL-2.0 + +#include <linux/stdarg.h> + +#include <linux/ctype.h> +#include <linux/efi.h> +#include <linux/kernel.h> +#include <linux/printk.h> /* For CONSOLE_LOGLEVEL_* */ +#include <asm/efi.h> +#include <asm/setup.h> + +#include "efistub.h" + +int efi_loglevel = CONSOLE_LOGLEVEL_DEFAULT; + +/** + * efi_char16_puts() - Write a UCS-2 encoded string to the console + * @str: UCS-2 encoded string + */ +void efi_char16_puts(efi_char16_t *str) +{ + efi_call_proto(efi_table_attr(efi_system_table, con_out), + output_string, str); +} + +static +u32 utf8_to_utf32(const u8 **s8) +{ + u32 c32; + u8 c0, cx; + size_t clen, i; + + c0 = cx = *(*s8)++; + /* + * The position of the most-significant 0 bit gives us the length of + * a multi-octet encoding. + */ + for (clen = 0; cx & 0x80; ++clen) + cx <<= 1; + /* + * If the 0 bit is in position 8, this is a valid single-octet + * encoding. If the 0 bit is in position 7 or positions 1-3, the + * encoding is invalid. + * In either case, we just return the first octet. + */ + if (clen < 2 || clen > 4) + return c0; + /* Get the bits from the first octet. */ + c32 = cx >> clen--; + for (i = 0; i < clen; ++i) { + /* Trailing octets must have 10 in most significant bits. */ + cx = (*s8)[i] ^ 0x80; + if (cx & 0xc0) + return c0; + c32 = (c32 << 6) | cx; + } + /* + * Check for validity: + * - The character must be in the Unicode range. + * - It must not be a surrogate. + * - It must be encoded using the correct number of octets. + */ + if (c32 > 0x10ffff || + (c32 & 0xf800) == 0xd800 || + clen != (c32 >= 0x80) + (c32 >= 0x800) + (c32 >= 0x10000)) + return c0; + *s8 += clen; + return c32; +} + +/** + * efi_puts() - Write a UTF-8 encoded string to the console + * @str: UTF-8 encoded string + */ +void efi_puts(const char *str) +{ + efi_char16_t buf[128]; + size_t pos = 0, lim = ARRAY_SIZE(buf); + const u8 *s8 = (const u8 *)str; + u32 c32; + + while (*s8) { + if (*s8 == '\n') + buf[pos++] = L'\r'; + c32 = utf8_to_utf32(&s8); + if (c32 < 0x10000) { + /* Characters in plane 0 use a single word. */ + buf[pos++] = c32; + } else { + /* + * Characters in other planes encode into a surrogate + * pair. + */ + buf[pos++] = (0xd800 - (0x10000 >> 10)) + (c32 >> 10); + buf[pos++] = 0xdc00 + (c32 & 0x3ff); + } + if (*s8 == '\0' || pos >= lim - 2) { + buf[pos] = L'\0'; + efi_char16_puts(buf); + pos = 0; + } + } +} + +/** + * efi_printk() - Print a kernel message + * @fmt: format string + * + * The first letter of the format string is used to determine the logging level + * of the message. If the level is less then the current EFI logging level, the + * message is suppressed. The message will be truncated to 255 bytes. + * + * Return: number of printed characters + */ +int efi_printk(const char *fmt, ...) +{ + char printf_buf[256]; + va_list args; + int printed; + int loglevel = printk_get_level(fmt); + + switch (loglevel) { + case '0' ... '9': + loglevel -= '0'; + break; + default: + /* + * Use loglevel -1 for cases where we just want to print to + * the screen. + */ + loglevel = -1; + break; + } + + if (loglevel >= efi_loglevel) + return 0; + + if (loglevel >= 0) + efi_puts("EFI stub: "); + + fmt = printk_skip_level(fmt); + + va_start(args, fmt); + printed = vsnprintf(printf_buf, sizeof(printf_buf), fmt, args); + va_end(args); + + efi_puts(printf_buf); + if (printed >= sizeof(printf_buf)) { + efi_puts("[Message truncated]\n"); + return -1; + } + + return printed; +} diff --git a/drivers/firmware/efi/libstub/random.c b/drivers/firmware/efi/libstub/random.c index 33ab56769595..7109b8a2dcba 100644 --- a/drivers/firmware/efi/libstub/random.c +++ b/drivers/firmware/efi/libstub/random.c @@ -67,47 +67,113 @@ efi_status_t efi_random_get_seed(void) efi_guid_t rng_proto = EFI_RNG_PROTOCOL_GUID; efi_guid_t rng_algo_raw = EFI_RNG_ALGORITHM_RAW; efi_guid_t rng_table_guid = LINUX_EFI_RANDOM_SEED_TABLE_GUID; + struct linux_efi_random_seed *prev_seed, *seed = NULL; + int prev_seed_size = 0, seed_size = EFI_RANDOM_SEED_SIZE; + unsigned long nv_seed_size = 0, offset = 0; efi_rng_protocol_t *rng = NULL; - struct linux_efi_random_seed *seed = NULL; efi_status_t status; status = efi_bs_call(locate_protocol, &rng_proto, NULL, (void **)&rng); if (status != EFI_SUCCESS) + seed_size = 0; + + // Call GetVariable() with a zero length buffer to obtain the size + get_efi_var(L"RandomSeed", &rng_table_guid, NULL, &nv_seed_size, NULL); + if (!seed_size && !nv_seed_size) return status; + seed_size += nv_seed_size; + + /* + * Check whether a seed was provided by a prior boot stage. In that + * case, instead of overwriting it, let's create a new buffer that can + * hold both, and concatenate the existing and the new seeds. + * Note that we should read the seed size with caution, in case the + * table got corrupted in memory somehow. + */ + prev_seed = get_efi_config_table(rng_table_guid); + if (prev_seed && prev_seed->size <= 512U) { + prev_seed_size = prev_seed->size; + seed_size += prev_seed_size; + } + /* * Use EFI_ACPI_RECLAIM_MEMORY here so that it is guaranteed that the * allocation will survive a kexec reboot (although we refresh the seed * beforehand) */ status = efi_bs_call(allocate_pool, EFI_ACPI_RECLAIM_MEMORY, - sizeof(*seed) + EFI_RANDOM_SEED_SIZE, + struct_size(seed, bits, seed_size), (void **)&seed); - if (status != EFI_SUCCESS) - return status; - - status = efi_call_proto(rng, get_rng, &rng_algo_raw, - EFI_RANDOM_SEED_SIZE, seed->bits); + if (status != EFI_SUCCESS) { + efi_warn("Failed to allocate memory for RNG seed.\n"); + goto err_warn; + } - if (status == EFI_UNSUPPORTED) - /* - * Use whatever algorithm we have available if the raw algorithm - * is not implemented. - */ - status = efi_call_proto(rng, get_rng, NULL, + if (rng) { + status = efi_call_proto(rng, get_rng, &rng_algo_raw, EFI_RANDOM_SEED_SIZE, seed->bits); - if (status != EFI_SUCCESS) + if (status == EFI_UNSUPPORTED) + /* + * Use whatever algorithm we have available if the raw algorithm + * is not implemented. + */ + status = efi_call_proto(rng, get_rng, NULL, + EFI_RANDOM_SEED_SIZE, seed->bits); + + if (status == EFI_SUCCESS) + offset = EFI_RANDOM_SEED_SIZE; + } + + if (nv_seed_size) { + status = get_efi_var(L"RandomSeed", &rng_table_guid, NULL, + &nv_seed_size, seed->bits + offset); + + if (status == EFI_SUCCESS) + /* + * We delete the seed here, and /hope/ that this causes + * EFI to also zero out its representation on disk. + * This is somewhat idealistic, but overwriting the + * variable with zeros is likely just as fraught too. + * TODO: in the future, maybe we can hash it forward + * instead, and write a new seed. + */ + status = set_efi_var(L"RandomSeed", &rng_table_guid, 0, + 0, NULL); + + if (status == EFI_SUCCESS) + offset += nv_seed_size; + else + memzero_explicit(seed->bits + offset, nv_seed_size); + } + + if (!offset) goto err_freepool; - seed->size = EFI_RANDOM_SEED_SIZE; + if (prev_seed_size) { + memcpy(seed->bits + offset, prev_seed->bits, prev_seed_size); + offset += prev_seed_size; + } + + seed->size = offset; status = efi_bs_call(install_configuration_table, &rng_table_guid, seed); if (status != EFI_SUCCESS) goto err_freepool; + if (prev_seed_size) { + /* wipe and free the old seed if we managed to install the new one */ + memzero_explicit(prev_seed->bits, prev_seed_size); + efi_bs_call(free_pool, prev_seed); + } return EFI_SUCCESS; err_freepool: + memzero_explicit(seed, struct_size(seed, bits, seed_size)); efi_bs_call(free_pool, seed); + efi_warn("Failed to obtain seed from EFI_RNG_PROTOCOL or EFI variable\n"); +err_warn: + if (prev_seed) + efi_warn("Retaining bootloader-supplied seed only"); return status; } diff --git a/drivers/firmware/efi/libstub/randomalloc.c b/drivers/firmware/efi/libstub/randomalloc.c index 9fb5869896be..1692d19ae80f 100644 --- a/drivers/firmware/efi/libstub/randomalloc.c +++ b/drivers/firmware/efi/libstub/randomalloc.c @@ -29,7 +29,7 @@ static unsigned long get_entry_num_slots(efi_memory_desc_t *md, return 0; region_end = min(md->phys_addr + md->num_pages * EFI_PAGE_SIZE - 1, - (u64)ULONG_MAX); + (u64)EFI_ALLOC_LIMIT); if (region_end < size) return 0; @@ -53,7 +53,8 @@ static unsigned long get_entry_num_slots(efi_memory_desc_t *md, efi_status_t efi_random_alloc(unsigned long size, unsigned long align, unsigned long *addr, - unsigned long random_seed) + unsigned long random_seed, + int memory_type) { unsigned long total_slots = 0, target_slot; unsigned long total_mirrored_slots = 0; @@ -118,7 +119,7 @@ efi_status_t efi_random_alloc(unsigned long size, pages = size / EFI_PAGE_SIZE; status = efi_bs_call(allocate_pages, EFI_ALLOCATE_ADDRESS, - EFI_LOADER_DATA, pages, &target); + memory_type, pages, &target); if (status == EFI_SUCCESS) *addr = target; break; diff --git a/drivers/firmware/efi/libstub/riscv-stub.c b/drivers/firmware/efi/libstub/riscv-stub.c index b450ebf95977..145c9f0ba217 100644 --- a/drivers/firmware/efi/libstub/riscv-stub.c +++ b/drivers/firmware/efi/libstub/riscv-stub.c @@ -4,7 +4,6 @@ */ #include <linux/efi.h> -#include <linux/libfdt.h> #include <asm/efi.h> #include <asm/sections.h> @@ -12,92 +11,16 @@ #include "efistub.h" -/* - * RISC-V requires the kernel image to placed 2 MB aligned base for 64 bit and - * 4MB for 32 bit. - */ -#ifdef CONFIG_64BIT -#define MIN_KIMG_ALIGN SZ_2M -#else -#define MIN_KIMG_ALIGN SZ_4M -#endif - -typedef void __noreturn (*jump_kernel_func)(unsigned long, unsigned long); - -static unsigned long hartid; - -static int get_boot_hartid_from_fdt(void) -{ - const void *fdt; - int chosen_node, len; - const void *prop; - - fdt = get_efi_config_table(DEVICE_TREE_GUID); - if (!fdt) - return -EINVAL; - - chosen_node = fdt_path_offset(fdt, "/chosen"); - if (chosen_node < 0) - return -EINVAL; - - prop = fdt_getprop((void *)fdt, chosen_node, "boot-hartid", &len); - if (!prop) - return -EINVAL; - - if (len == sizeof(u32)) - hartid = (unsigned long) fdt32_to_cpu(*(fdt32_t *)prop); - else if (len == sizeof(u64)) - hartid = (unsigned long) fdt64_to_cpu(__get_unaligned_t(fdt64_t, prop)); - else - return -EINVAL; - - return 0; -} - -static efi_status_t get_boot_hartid_from_efi(void) +unsigned long stext_offset(void) { - efi_guid_t boot_protocol_guid = RISCV_EFI_BOOT_PROTOCOL_GUID; - struct riscv_efi_boot_protocol *boot_protocol; - efi_status_t status; - - status = efi_bs_call(locate_protocol, &boot_protocol_guid, NULL, - (void **)&boot_protocol); - if (status != EFI_SUCCESS) - return status; - return efi_call_proto(boot_protocol, get_boot_hartid, &hartid); -} - -efi_status_t check_platform_features(void) -{ - efi_status_t status; - int ret; - - status = get_boot_hartid_from_efi(); - if (status != EFI_SUCCESS) { - ret = get_boot_hartid_from_fdt(); - if (ret) { - efi_err("Failed to get boot hartid!\n"); - return EFI_UNSUPPORTED; - } - } - return EFI_SUCCESS; -} - -void __noreturn efi_enter_kernel(unsigned long entrypoint, unsigned long fdt, - unsigned long fdt_size) -{ - unsigned long stext_offset = _start_kernel - _start; - unsigned long kernel_entry = entrypoint + stext_offset; - jump_kernel_func jump_kernel = (jump_kernel_func)kernel_entry; - /* - * Jump to real kernel here with following constraints. - * 1. MMU should be disabled. - * 2. a0 should contain hartid - * 3. a1 should DT address + * When built as part of the kernel, the EFI stub cannot branch to the + * kernel proper via the image header, as the PE/COFF header is + * strictly not part of the in-memory presentation of the image, only + * of the file representation. So instead, we need to jump to the + * actual entrypoint in the .text region of the image. */ - csr_write(CSR_SATP, 0); - jump_kernel(hartid, fdt); + return _start_kernel - _start; } efi_status_t handle_kernel_image(unsigned long *image_addr, @@ -125,9 +48,10 @@ efi_status_t handle_kernel_image(unsigned long *image_addr, * lowest possible memory region as long as the address and size meets * the alignment constraints. */ - preferred_addr = MIN_KIMG_ALIGN; + preferred_addr = EFI_KIMG_PREFERRED_ADDRESS; status = efi_relocate_kernel(image_addr, kernel_size, *image_size, - preferred_addr, MIN_KIMG_ALIGN, 0x0); + preferred_addr, efi_get_kimg_min_align(), + 0x0); if (status != EFI_SUCCESS) { efi_err("Failed to relocate kernel\n"); diff --git a/drivers/firmware/efi/libstub/riscv.c b/drivers/firmware/efi/libstub/riscv.c new file mode 100644 index 000000000000..8022b104c3e6 --- /dev/null +++ b/drivers/firmware/efi/libstub/riscv.c @@ -0,0 +1,98 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2020 Western Digital Corporation or its affiliates. + */ + +#include <linux/efi.h> +#include <linux/libfdt.h> + +#include <asm/efi.h> +#include <asm/unaligned.h> + +#include "efistub.h" + +typedef void __noreturn (*jump_kernel_func)(unsigned long, unsigned long); + +static unsigned long hartid; + +static int get_boot_hartid_from_fdt(void) +{ + const void *fdt; + int chosen_node, len; + const void *prop; + + fdt = get_efi_config_table(DEVICE_TREE_GUID); + if (!fdt) + return -EINVAL; + + chosen_node = fdt_path_offset(fdt, "/chosen"); + if (chosen_node < 0) + return -EINVAL; + + prop = fdt_getprop((void *)fdt, chosen_node, "boot-hartid", &len); + if (!prop) + return -EINVAL; + + if (len == sizeof(u32)) + hartid = (unsigned long) fdt32_to_cpu(*(fdt32_t *)prop); + else if (len == sizeof(u64)) + hartid = (unsigned long) fdt64_to_cpu(__get_unaligned_t(fdt64_t, prop)); + else + return -EINVAL; + + return 0; +} + +static efi_status_t get_boot_hartid_from_efi(void) +{ + efi_guid_t boot_protocol_guid = RISCV_EFI_BOOT_PROTOCOL_GUID; + struct riscv_efi_boot_protocol *boot_protocol; + efi_status_t status; + + status = efi_bs_call(locate_protocol, &boot_protocol_guid, NULL, + (void **)&boot_protocol); + if (status != EFI_SUCCESS) + return status; + return efi_call_proto(boot_protocol, get_boot_hartid, &hartid); +} + +efi_status_t check_platform_features(void) +{ + efi_status_t status; + int ret; + + status = get_boot_hartid_from_efi(); + if (status != EFI_SUCCESS) { + ret = get_boot_hartid_from_fdt(); + if (ret) { + efi_err("Failed to get boot hartid!\n"); + return EFI_UNSUPPORTED; + } + } + return EFI_SUCCESS; +} + +unsigned long __weak stext_offset(void) +{ + /* + * This fallback definition is used by the EFI zboot stub, which loads + * the entire image so it can branch via the image header at offset #0. + */ + return 0; +} + +void __noreturn efi_enter_kernel(unsigned long entrypoint, unsigned long fdt, + unsigned long fdt_size) +{ + unsigned long kernel_entry = entrypoint + stext_offset(); + jump_kernel_func jump_kernel = (jump_kernel_func)kernel_entry; + + /* + * Jump to real kernel here with following constraints. + * 1. MMU should be disabled. + * 2. a0 should contain hartid + * 3. a1 should DT address + */ + csr_write(CSR_SATP, 0); + jump_kernel(hartid, fdt); +} diff --git a/drivers/firmware/efi/libstub/screen_info.c b/drivers/firmware/efi/libstub/screen_info.c new file mode 100644 index 000000000000..8e76a8b384ba --- /dev/null +++ b/drivers/firmware/efi/libstub/screen_info.c @@ -0,0 +1,56 @@ +// SPDX-License-Identifier: GPL-2.0 + +#include <linux/efi.h> +#include <asm/efi.h> + +#include "efistub.h" + +/* + * There are two ways of populating the core kernel's struct screen_info via the stub: + * - using a configuration table, like below, which relies on the EFI init code + * to locate the table and copy the contents; + * - by linking directly to the core kernel's copy of the global symbol. + * + * The latter is preferred because it makes the EFIFB earlycon available very + * early, but it only works if the EFI stub is part of the core kernel image + * itself. The zboot decompressor can only use the configuration table + * approach. + * + * In order to support both methods from the same build of the EFI stub + * library, provide this dummy global definition of struct screen_info. If it + * is required to satisfy a link dependency, it means we need to override the + * __weak alloc and free methods with the ones below, and those will be pulled + * in as well. + */ +struct screen_info screen_info; + +static efi_guid_t screen_info_guid = LINUX_EFI_SCREEN_INFO_TABLE_GUID; + +struct screen_info *alloc_screen_info(void) +{ + struct screen_info *si; + efi_status_t status; + + status = efi_bs_call(allocate_pool, EFI_ACPI_RECLAIM_MEMORY, + sizeof(*si), (void **)&si); + + if (status != EFI_SUCCESS) + return NULL; + + status = efi_bs_call(install_configuration_table, + &screen_info_guid, si); + if (status == EFI_SUCCESS) + return si; + + efi_bs_call(free_pool, si); + return NULL; +} + +void free_screen_info(struct screen_info *si) +{ + if (!si) + return; + + efi_bs_call(install_configuration_table, &screen_info_guid, NULL); + efi_bs_call(free_pool, si); +} diff --git a/drivers/firmware/efi/libstub/string.c b/drivers/firmware/efi/libstub/string.c index 5d13e43869ee..168fe8e79abc 100644 --- a/drivers/firmware/efi/libstub/string.c +++ b/drivers/firmware/efi/libstub/string.c @@ -11,7 +11,37 @@ #include <linux/types.h> #include <linux/string.h> -#ifndef __HAVE_ARCH_STRSTR +#ifndef EFI_HAVE_STRLEN +/** + * strlen - Find the length of a string + * @s: The string to be sized + */ +size_t strlen(const char *s) +{ + const char *sc; + + for (sc = s; *sc != '\0'; ++sc) + /* nothing */; + return sc - s; +} +#endif + +#ifndef EFI_HAVE_STRNLEN +/** + * strnlen - Find the length of a length-limited string + * @s: The string to be sized + * @count: The maximum number of bytes to search + */ +size_t strnlen(const char *s, size_t count) +{ + const char *sc; + + for (sc = s; count-- && *sc != '\0'; ++sc) + /* nothing */; + return sc - s; +} +#endif + /** * strstr - Find the first substring in a %NUL terminated string * @s1: The string to be searched @@ -33,9 +63,29 @@ char *strstr(const char *s1, const char *s2) } return NULL; } + +#ifndef EFI_HAVE_STRCMP +/** + * strcmp - Compare two strings + * @cs: One string + * @ct: Another string + */ +int strcmp(const char *cs, const char *ct) +{ + unsigned char c1, c2; + + while (1) { + c1 = *cs++; + c2 = *ct++; + if (c1 != c2) + return c1 < c2 ? -1 : 1; + if (!c1) + break; + } + return 0; +} #endif -#ifndef __HAVE_ARCH_STRNCMP /** * strncmp - Compare two length-limited strings * @cs: One string @@ -57,7 +107,6 @@ int strncmp(const char *cs, const char *ct, size_t count) } return 0; } -#endif /* Works only for digits and letters, but small and fast */ #define TOLOWER(x) ((x) | 0x20) @@ -113,3 +162,43 @@ long simple_strtol(const char *cp, char **endp, unsigned int base) return simple_strtoull(cp, endp, base); } + +#ifdef CONFIG_EFI_PARAMS_FROM_FDT +#ifndef EFI_HAVE_STRRCHR +/** + * strrchr - Find the last occurrence of a character in a string + * @s: The string to be searched + * @c: The character to search for + */ +char *strrchr(const char *s, int c) +{ + const char *last = NULL; + do { + if (*s == (char)c) + last = s; + } while (*s++); + return (char *)last; +} +#endif +#ifndef EFI_HAVE_MEMCHR +/** + * memchr - Find a character in an area of memory. + * @s: The memory area + * @c: The byte to search for + * @n: The size of the area. + * + * returns the address of the first occurrence of @c, or %NULL + * if @c is not found + */ +void *memchr(const void *s, int c, size_t n) +{ + const unsigned char *p = s; + while (n-- != 0) { + if ((unsigned char)c == *p++) { + return (void *)(p - 1); + } + } + return NULL; +} +#endif +#endif diff --git a/drivers/firmware/efi/libstub/zboot-header.S b/drivers/firmware/efi/libstub/zboot-header.S index 9e6fe061ab07..ec4525d40e0c 100644 --- a/drivers/firmware/efi/libstub/zboot-header.S +++ b/drivers/firmware/efi/libstub/zboot-header.S @@ -17,10 +17,11 @@ __efistub_efi_zboot_header: .long MZ_MAGIC .ascii "zimg" // image type .long __efistub__gzdata_start - .Ldoshdr // payload offset - .long __efistub__gzdata_size - ZBOOT_SIZE_LEN // payload size + .long __efistub__gzdata_size - 12 // payload size .long 0, 0 // reserved .asciz COMP_TYPE // compression type - .org .Ldoshdr + 0x3c + .org .Ldoshdr + 0x38 + .long LINUX_PE_MAGIC .long .Lpehdr - .Ldoshdr // PE header offset .Lpehdr: diff --git a/drivers/firmware/efi/libstub/zboot.c b/drivers/firmware/efi/libstub/zboot.c index ea72c8f27da6..66be5fdc6b58 100644 --- a/drivers/firmware/efi/libstub/zboot.c +++ b/drivers/firmware/efi/libstub/zboot.c @@ -32,271 +32,116 @@ static unsigned long free_mem_ptr, free_mem_end_ptr; extern char efi_zboot_header[]; extern char _gzdata_start[], _gzdata_end[]; -static void log(efi_char16_t str[]) -{ - efi_call_proto(efi_table_attr(efi_system_table, con_out), - output_string, L"EFI decompressor: "); - efi_call_proto(efi_table_attr(efi_system_table, con_out), - output_string, str); - efi_call_proto(efi_table_attr(efi_system_table, con_out), - output_string, L"\n"); -} - static void error(char *x) { - log(L"error() called from decompressor library\n"); -} - -// Local version to avoid pulling in memcmp() -static bool guids_eq(const efi_guid_t *a, const efi_guid_t *b) -{ - const u32 *l = (u32 *)a; - const u32 *r = (u32 *)b; - - return l[0] == r[0] && l[1] == r[1] && l[2] == r[2] && l[3] == r[3]; -} - -static efi_status_t __efiapi -load_file(efi_load_file_protocol_t *this, efi_device_path_protocol_t *rem, - bool boot_policy, unsigned long *bufsize, void *buffer) -{ - unsigned long compressed_size = _gzdata_end - _gzdata_start; - struct efi_vendor_dev_path *vendor_dp; - bool decompress = false; - unsigned long size; - int ret; - - if (rem == NULL || bufsize == NULL) - return EFI_INVALID_PARAMETER; - - if (boot_policy) - return EFI_UNSUPPORTED; - - // Look for our vendor media device node in the remaining file path - if (rem->type == EFI_DEV_MEDIA && - rem->sub_type == EFI_DEV_MEDIA_VENDOR) { - vendor_dp = container_of(rem, struct efi_vendor_dev_path, header); - if (!guids_eq(&vendor_dp->vendorguid, &LINUX_EFI_ZBOOT_MEDIA_GUID)) - return EFI_NOT_FOUND; - - decompress = true; - rem = (void *)(vendor_dp + 1); - } - - if (rem->type != EFI_DEV_END_PATH || - rem->sub_type != EFI_DEV_END_ENTIRE) - return EFI_NOT_FOUND; - - // The uncompressed size of the payload is appended to the raw bit - // stream, and may therefore appear misaligned in memory - size = decompress ? get_unaligned_le32(_gzdata_end - 4) - : compressed_size; - if (buffer == NULL || *bufsize < size) { - *bufsize = size; - return EFI_BUFFER_TOO_SMALL; - } - - if (decompress) { - ret = __decompress(_gzdata_start, compressed_size, NULL, NULL, - buffer, size, NULL, error); - if (ret < 0) { - log(L"Decompression failed"); - return EFI_DEVICE_ERROR; - } - } else { - memcpy(buffer, _gzdata_start, compressed_size); - } - - return EFI_SUCCESS; -} - -// Return the length in bytes of the device path up to the first end node. -static int device_path_length(const efi_device_path_protocol_t *dp) -{ - int len = 0; - - while (dp->type != EFI_DEV_END_PATH) { - len += dp->length; - dp = (void *)((u8 *)dp + dp->length); - } - return len; + efi_err("EFI decompressor: %s\n", x); } -static void append_rel_offset_node(efi_device_path_protocol_t **dp, - unsigned long start, unsigned long end) +static unsigned long alloc_preferred_address(unsigned long alloc_size) { - struct efi_rel_offset_dev_path *rodp = (void *)*dp; - - rodp->header.type = EFI_DEV_MEDIA; - rodp->header.sub_type = EFI_DEV_MEDIA_REL_OFFSET; - rodp->header.length = sizeof(struct efi_rel_offset_dev_path); - rodp->reserved = 0; - rodp->starting_offset = start; - rodp->ending_offset = end; +#ifdef EFI_KIMG_PREFERRED_ADDRESS + efi_physical_addr_t efi_addr = EFI_KIMG_PREFERRED_ADDRESS; - *dp = (void *)(rodp + 1); -} - -static void append_ven_media_node(efi_device_path_protocol_t **dp, - efi_guid_t *guid) -{ - struct efi_vendor_dev_path *vmdp = (void *)*dp; - - vmdp->header.type = EFI_DEV_MEDIA; - vmdp->header.sub_type = EFI_DEV_MEDIA_VENDOR; - vmdp->header.length = sizeof(struct efi_vendor_dev_path); - vmdp->vendorguid = *guid; - - *dp = (void *)(vmdp + 1); + if (efi_bs_call(allocate_pages, EFI_ALLOCATE_ADDRESS, EFI_LOADER_DATA, + alloc_size / EFI_PAGE_SIZE, &efi_addr) == EFI_SUCCESS) + return efi_addr; +#endif + return ULONG_MAX; } -static void append_end_node(efi_device_path_protocol_t **dp) +void __weak efi_cache_sync_image(unsigned long image_base, + unsigned long alloc_size, + unsigned long code_size) { - (*dp)->type = EFI_DEV_END_PATH; - (*dp)->sub_type = EFI_DEV_END_ENTIRE; - (*dp)->length = sizeof(struct efi_generic_dev_path); - - ++*dp; + // Provided by the arch to perform the cache maintenance necessary for + // executable code loaded into memory to be safe for execution. } asmlinkage efi_status_t __efiapi efi_zboot_entry(efi_handle_t handle, efi_system_table_t *systab) { - struct efi_mem_mapped_dev_path mmdp = { - .header.type = EFI_DEV_HW, - .header.sub_type = EFI_DEV_MEM_MAPPED, - .header.length = sizeof(struct efi_mem_mapped_dev_path) - }; - efi_device_path_protocol_t *parent_dp, *dpp, *lf2_dp, *li_dp; - efi_load_file2_protocol_t zboot_load_file2; - efi_loaded_image_t *parent, *child; - unsigned long exit_data_size; - efi_handle_t child_handle; - efi_handle_t zboot_handle; - efi_char16_t *exit_data; + unsigned long compressed_size = _gzdata_end - _gzdata_start; + unsigned long image_base, alloc_size, code_size; + efi_loaded_image_t *image; efi_status_t status; - void *dp_alloc; - int dp_len; + char *cmdline_ptr; + int ret; WRITE_ONCE(efi_system_table, systab); free_mem_ptr = (unsigned long)&zboot_heap; free_mem_end_ptr = free_mem_ptr + sizeof(zboot_heap); - exit_data = NULL; - exit_data_size = 0; - status = efi_bs_call(handle_protocol, handle, - &LOADED_IMAGE_PROTOCOL_GUID, (void **)&parent); + &LOADED_IMAGE_PROTOCOL_GUID, (void **)&image); if (status != EFI_SUCCESS) { - log(L"Failed to locate parent's loaded image protocol"); + error("Failed to locate parent's loaded image protocol"); return status; } - status = efi_bs_call(handle_protocol, handle, - &LOADED_IMAGE_DEVICE_PATH_PROTOCOL_GUID, - (void **)&parent_dp); - if (status != EFI_SUCCESS || parent_dp == NULL) { - // Create a MemoryMapped() device path node to describe - // the parent image if no device path was provided. - mmdp.memory_type = parent->image_code_type; - mmdp.starting_addr = (unsigned long)parent->image_base; - mmdp.ending_addr = (unsigned long)parent->image_base + - parent->image_size - 1; - parent_dp = &mmdp.header; - dp_len = sizeof(mmdp); - } else { - dp_len = device_path_length(parent_dp); - } - - // Allocate some pool memory for device path protocol data - status = efi_bs_call(allocate_pool, EFI_LOADER_DATA, - 2 * (dp_len + sizeof(struct efi_rel_offset_dev_path) + - sizeof(struct efi_generic_dev_path)) + - sizeof(struct efi_vendor_dev_path), - (void **)&dp_alloc); - if (status != EFI_SUCCESS) { - log(L"Failed to allocate device path pool memory"); + status = efi_handle_cmdline(image, &cmdline_ptr); + if (status != EFI_SUCCESS) return status; - } - // Create a device path describing the compressed payload in this image - // <...parent_dp...>/Offset(<start>, <end>) - lf2_dp = memcpy(dp_alloc, parent_dp, dp_len); - dpp = (void *)((u8 *)lf2_dp + dp_len); - append_rel_offset_node(&dpp, - (unsigned long)(_gzdata_start - efi_zboot_header), - (unsigned long)(_gzdata_end - efi_zboot_header - 1)); - append_end_node(&dpp); - - // Create a device path describing the decompressed payload in this image - // <...parent_dp...>/Offset(<start>, <end>)/VenMedia(ZBOOT_MEDIA_GUID) - dp_len += sizeof(struct efi_rel_offset_dev_path); - li_dp = memcpy(dpp, lf2_dp, dp_len); - dpp = (void *)((u8 *)li_dp + dp_len); - append_ven_media_node(&dpp, &LINUX_EFI_ZBOOT_MEDIA_GUID); - append_end_node(&dpp); - - zboot_handle = NULL; - zboot_load_file2.load_file = load_file; - status = efi_bs_call(install_multiple_protocol_interfaces, - &zboot_handle, - &EFI_DEVICE_PATH_PROTOCOL_GUID, lf2_dp, - &EFI_LOAD_FILE2_PROTOCOL_GUID, &zboot_load_file2, - NULL); - if (status != EFI_SUCCESS) { - log(L"Failed to install LoadFile2 protocol and device path"); - goto free_dpalloc; - } - - status = efi_bs_call(load_image, false, handle, li_dp, NULL, 0, - &child_handle); - if (status != EFI_SUCCESS) { - log(L"Failed to load image"); - goto uninstall_lf2; - } + efi_info("Decompressing Linux Kernel...\n"); + + // SizeOfImage from the compressee's PE/COFF header + alloc_size = round_up(get_unaligned_le32(_gzdata_end - 4), + EFI_ALLOC_ALIGN); + + // SizeOfHeaders and SizeOfCode from the compressee's PE/COFF header + code_size = get_unaligned_le32(_gzdata_end - 8) + + get_unaligned_le32(_gzdata_end - 12); + + // If the architecture has a preferred address for the image, + // try that first. + image_base = alloc_preferred_address(alloc_size); + if (image_base == ULONG_MAX) { + unsigned long min_kimg_align = efi_get_kimg_min_align(); + u32 seed = U32_MAX; + + if (!IS_ENABLED(CONFIG_RANDOMIZE_BASE)) { + // Setting the random seed to 0x0 is the same as + // allocating as low as possible + seed = 0; + } else if (efi_nokaslr) { + efi_info("KASLR disabled on kernel command line\n"); + } else { + status = efi_get_random_bytes(sizeof(seed), (u8 *)&seed); + if (status == EFI_NOT_FOUND) { + efi_info("EFI_RNG_PROTOCOL unavailable\n"); + efi_nokaslr = true; + } else if (status != EFI_SUCCESS) { + efi_err("efi_get_random_bytes() failed (0x%lx)\n", + status); + efi_nokaslr = true; + } + } - status = efi_bs_call(handle_protocol, child_handle, - &LOADED_IMAGE_PROTOCOL_GUID, (void **)&child); - if (status != EFI_SUCCESS) { - log(L"Failed to locate child's loaded image protocol"); - goto unload_image; + status = efi_random_alloc(alloc_size, min_kimg_align, &image_base, + seed, EFI_LOADER_CODE); + if (status != EFI_SUCCESS) { + efi_err("Failed to allocate memory\n"); + goto free_cmdline; + } } - // Copy the kernel command line - child->load_options = parent->load_options; - child->load_options_size = parent->load_options_size; - - status = efi_bs_call(start_image, child_handle, &exit_data_size, - &exit_data); - if (status != EFI_SUCCESS) { - log(L"StartImage() returned with error"); - if (exit_data_size > 0) - log(exit_data); - - // If StartImage() returns EFI_SECURITY_VIOLATION, the image is - // not unloaded so we need to do it by hand. - if (status == EFI_SECURITY_VIOLATION) -unload_image: - efi_bs_call(unload_image, child_handle); + // Decompress the payload into the newly allocated buffer. + ret = __decompress(_gzdata_start, compressed_size, NULL, NULL, + (void *)image_base, alloc_size, NULL, error); + if (ret < 0) { + error("Decompression failed"); + status = EFI_DEVICE_ERROR; + goto free_image; } -uninstall_lf2: - efi_bs_call(uninstall_multiple_protocol_interfaces, - zboot_handle, - &EFI_DEVICE_PATH_PROTOCOL_GUID, lf2_dp, - &EFI_LOAD_FILE2_PROTOCOL_GUID, &zboot_load_file2, - NULL); - -free_dpalloc: - efi_bs_call(free_pool, dp_alloc); + efi_cache_sync_image(image_base, alloc_size, code_size); - efi_bs_call(exit, handle, status, exit_data_size, exit_data); + status = efi_stub_common(handle, image, image_base, cmdline_ptr); - // Free ExitData in case Exit() returned with a failure code, - // but return the original status code. - log(L"Exit() returned with failure code"); - if (exit_data != NULL) - efi_bs_call(free_pool, exit_data); +free_image: + efi_free(alloc_size, image_base); +free_cmdline: + efi_bs_call(free_pool, cmdline_ptr); return status; } diff --git a/drivers/firmware/efi/memmap.c b/drivers/firmware/efi/memmap.c index 6ec7970dbd40..a1180461a445 100644 --- a/drivers/firmware/efi/memmap.c +++ b/drivers/firmware/efi/memmap.c @@ -9,82 +9,15 @@ #include <linux/kernel.h> #include <linux/efi.h> #include <linux/io.h> -#include <asm/early_ioremap.h> #include <linux/memblock.h> #include <linux/slab.h> -static phys_addr_t __init __efi_memmap_alloc_early(unsigned long size) -{ - return memblock_phys_alloc(size, SMP_CACHE_BYTES); -} - -static phys_addr_t __init __efi_memmap_alloc_late(unsigned long size) -{ - unsigned int order = get_order(size); - struct page *p = alloc_pages(GFP_KERNEL, order); - - if (!p) - return 0; - - return PFN_PHYS(page_to_pfn(p)); -} - -void __init __efi_memmap_free(u64 phys, unsigned long size, unsigned long flags) -{ - if (flags & EFI_MEMMAP_MEMBLOCK) { - if (slab_is_available()) - memblock_free_late(phys, size); - else - memblock_phys_free(phys, size); - } else if (flags & EFI_MEMMAP_SLAB) { - struct page *p = pfn_to_page(PHYS_PFN(phys)); - unsigned int order = get_order(size); - - free_pages((unsigned long) page_address(p), order); - } -} - -static void __init efi_memmap_free(void) -{ - __efi_memmap_free(efi.memmap.phys_map, - efi.memmap.desc_size * efi.memmap.nr_map, - efi.memmap.flags); -} - -/** - * efi_memmap_alloc - Allocate memory for the EFI memory map - * @num_entries: Number of entries in the allocated map. - * @data: efi memmap installation parameters - * - * Depending on whether mm_init() has already been invoked or not, - * either memblock or "normal" page allocation is used. - * - * Returns zero on success, a negative error code on failure. - */ -int __init efi_memmap_alloc(unsigned int num_entries, - struct efi_memory_map_data *data) -{ - /* Expect allocation parameters are zero initialized */ - WARN_ON(data->phys_map || data->size); - - data->size = num_entries * efi.memmap.desc_size; - data->desc_version = efi.memmap.desc_version; - data->desc_size = efi.memmap.desc_size; - data->flags &= ~(EFI_MEMMAP_SLAB | EFI_MEMMAP_MEMBLOCK); - data->flags |= efi.memmap.flags & EFI_MEMMAP_LATE; - - if (slab_is_available()) { - data->flags |= EFI_MEMMAP_SLAB; - data->phys_map = __efi_memmap_alloc_late(data->size); - } else { - data->flags |= EFI_MEMMAP_MEMBLOCK; - data->phys_map = __efi_memmap_alloc_early(data->size); - } +#include <asm/early_ioremap.h> +#include <asm/efi.h> - if (!data->phys_map) - return -ENOMEM; - return 0; -} +#ifndef __efi_memmap_free +#define __efi_memmap_free(phys, size, flags) do { } while (0) +#endif /** * __efi_memmap_init - Common code for mapping the EFI memory map @@ -101,14 +34,11 @@ int __init efi_memmap_alloc(unsigned int num_entries, * * Returns zero on success, a negative error code on failure. */ -static int __init __efi_memmap_init(struct efi_memory_map_data *data) +int __init __efi_memmap_init(struct efi_memory_map_data *data) { struct efi_memory_map map; phys_addr_t phys_map; - if (efi_enabled(EFI_PARAVIRT)) - return 0; - phys_map = data->phys_map; if (data->flags & EFI_MEMMAP_LATE) @@ -121,8 +51,10 @@ static int __init __efi_memmap_init(struct efi_memory_map_data *data) return -ENOMEM; } - /* NOP if data->flags & (EFI_MEMMAP_MEMBLOCK | EFI_MEMMAP_SLAB) == 0 */ - efi_memmap_free(); + if (efi.memmap.flags & (EFI_MEMMAP_MEMBLOCK | EFI_MEMMAP_SLAB)) + __efi_memmap_free(efi.memmap.phys_map, + efi.memmap.desc_size * efi.memmap.nr_map, + efi.memmap.flags); map.phys_map = data->phys_map; map.nr_map = data->size / data->desc_size; @@ -220,158 +152,3 @@ int __init efi_memmap_init_late(phys_addr_t addr, unsigned long size) return __efi_memmap_init(&data); } - -/** - * efi_memmap_install - Install a new EFI memory map in efi.memmap - * @ctx: map allocation parameters (address, size, flags) - * - * Unlike efi_memmap_init_*(), this function does not allow the caller - * to switch from early to late mappings. It simply uses the existing - * mapping function and installs the new memmap. - * - * Returns zero on success, a negative error code on failure. - */ -int __init efi_memmap_install(struct efi_memory_map_data *data) -{ - efi_memmap_unmap(); - - return __efi_memmap_init(data); -} - -/** - * efi_memmap_split_count - Count number of additional EFI memmap entries - * @md: EFI memory descriptor to split - * @range: Address range (start, end) to split around - * - * Returns the number of additional EFI memmap entries required to - * accommodate @range. - */ -int __init efi_memmap_split_count(efi_memory_desc_t *md, struct range *range) -{ - u64 m_start, m_end; - u64 start, end; - int count = 0; - - start = md->phys_addr; - end = start + (md->num_pages << EFI_PAGE_SHIFT) - 1; - - /* modifying range */ - m_start = range->start; - m_end = range->end; - - if (m_start <= start) { - /* split into 2 parts */ - if (start < m_end && m_end < end) - count++; - } - - if (start < m_start && m_start < end) { - /* split into 3 parts */ - if (m_end < end) - count += 2; - /* split into 2 parts */ - if (end <= m_end) - count++; - } - - return count; -} - -/** - * efi_memmap_insert - Insert a memory region in an EFI memmap - * @old_memmap: The existing EFI memory map structure - * @buf: Address of buffer to store new map - * @mem: Memory map entry to insert - * - * It is suggested that you call efi_memmap_split_count() first - * to see how large @buf needs to be. - */ -void __init efi_memmap_insert(struct efi_memory_map *old_memmap, void *buf, - struct efi_mem_range *mem) -{ - u64 m_start, m_end, m_attr; - efi_memory_desc_t *md; - u64 start, end; - void *old, *new; - - /* modifying range */ - m_start = mem->range.start; - m_end = mem->range.end; - m_attr = mem->attribute; - - /* - * The EFI memory map deals with regions in EFI_PAGE_SIZE - * units. Ensure that the region described by 'mem' is aligned - * correctly. - */ - if (!IS_ALIGNED(m_start, EFI_PAGE_SIZE) || - !IS_ALIGNED(m_end + 1, EFI_PAGE_SIZE)) { - WARN_ON(1); - return; - } - - for (old = old_memmap->map, new = buf; - old < old_memmap->map_end; - old += old_memmap->desc_size, new += old_memmap->desc_size) { - - /* copy original EFI memory descriptor */ - memcpy(new, old, old_memmap->desc_size); - md = new; - start = md->phys_addr; - end = md->phys_addr + (md->num_pages << EFI_PAGE_SHIFT) - 1; - - if (m_start <= start && end <= m_end) - md->attribute |= m_attr; - - if (m_start <= start && - (start < m_end && m_end < end)) { - /* first part */ - md->attribute |= m_attr; - md->num_pages = (m_end - md->phys_addr + 1) >> - EFI_PAGE_SHIFT; - /* latter part */ - new += old_memmap->desc_size; - memcpy(new, old, old_memmap->desc_size); - md = new; - md->phys_addr = m_end + 1; - md->num_pages = (end - md->phys_addr + 1) >> - EFI_PAGE_SHIFT; - } - - if ((start < m_start && m_start < end) && m_end < end) { - /* first part */ - md->num_pages = (m_start - md->phys_addr) >> - EFI_PAGE_SHIFT; - /* middle part */ - new += old_memmap->desc_size; - memcpy(new, old, old_memmap->desc_size); - md = new; - md->attribute |= m_attr; - md->phys_addr = m_start; - md->num_pages = (m_end - m_start + 1) >> - EFI_PAGE_SHIFT; - /* last part */ - new += old_memmap->desc_size; - memcpy(new, old, old_memmap->desc_size); - md = new; - md->phys_addr = m_end + 1; - md->num_pages = (end - m_end) >> - EFI_PAGE_SHIFT; - } - - if ((start < m_start && m_start < end) && - (end <= m_end)) { - /* first part */ - md->num_pages = (m_start - md->phys_addr) >> - EFI_PAGE_SHIFT; - /* latter part */ - new += old_memmap->desc_size; - memcpy(new, old, old_memmap->desc_size); - md = new; - md->phys_addr = m_start; - md->num_pages = (end - md->phys_addr + 1) >> - EFI_PAGE_SHIFT; - md->attribute |= m_attr; - } - } -} diff --git a/drivers/firmware/efi/runtime-map.c b/drivers/firmware/efi/runtime-map.c deleted file mode 100644 index 92a3d45a795c..000000000000 --- a/drivers/firmware/efi/runtime-map.c +++ /dev/null @@ -1,193 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * linux/drivers/efi/runtime-map.c - * Copyright (C) 2013 Red Hat, Inc., Dave Young <dyoung@redhat.com> - */ - -#include <linux/string.h> -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/types.h> -#include <linux/efi.h> -#include <linux/slab.h> - -#include <asm/setup.h> - -struct efi_runtime_map_entry { - efi_memory_desc_t md; - struct kobject kobj; /* kobject for each entry */ -}; - -static struct efi_runtime_map_entry **map_entries; - -struct map_attribute { - struct attribute attr; - ssize_t (*show)(struct efi_runtime_map_entry *entry, char *buf); -}; - -static inline struct map_attribute *to_map_attr(struct attribute *attr) -{ - return container_of(attr, struct map_attribute, attr); -} - -static ssize_t type_show(struct efi_runtime_map_entry *entry, char *buf) -{ - return snprintf(buf, PAGE_SIZE, "0x%x\n", entry->md.type); -} - -#define EFI_RUNTIME_FIELD(var) entry->md.var - -#define EFI_RUNTIME_U64_ATTR_SHOW(name) \ -static ssize_t name##_show(struct efi_runtime_map_entry *entry, char *buf) \ -{ \ - return snprintf(buf, PAGE_SIZE, "0x%llx\n", EFI_RUNTIME_FIELD(name)); \ -} - -EFI_RUNTIME_U64_ATTR_SHOW(phys_addr); -EFI_RUNTIME_U64_ATTR_SHOW(virt_addr); -EFI_RUNTIME_U64_ATTR_SHOW(num_pages); -EFI_RUNTIME_U64_ATTR_SHOW(attribute); - -static inline struct efi_runtime_map_entry *to_map_entry(struct kobject *kobj) -{ - return container_of(kobj, struct efi_runtime_map_entry, kobj); -} - -static ssize_t map_attr_show(struct kobject *kobj, struct attribute *attr, - char *buf) -{ - struct efi_runtime_map_entry *entry = to_map_entry(kobj); - struct map_attribute *map_attr = to_map_attr(attr); - - return map_attr->show(entry, buf); -} - -static struct map_attribute map_type_attr = __ATTR_RO_MODE(type, 0400); -static struct map_attribute map_phys_addr_attr = __ATTR_RO_MODE(phys_addr, 0400); -static struct map_attribute map_virt_addr_attr = __ATTR_RO_MODE(virt_addr, 0400); -static struct map_attribute map_num_pages_attr = __ATTR_RO_MODE(num_pages, 0400); -static struct map_attribute map_attribute_attr = __ATTR_RO_MODE(attribute, 0400); - -/* - * These are default attributes that are added for every memmap entry. - */ -static struct attribute *def_attrs[] = { - &map_type_attr.attr, - &map_phys_addr_attr.attr, - &map_virt_addr_attr.attr, - &map_num_pages_attr.attr, - &map_attribute_attr.attr, - NULL -}; -ATTRIBUTE_GROUPS(def); - -static const struct sysfs_ops map_attr_ops = { - .show = map_attr_show, -}; - -static void map_release(struct kobject *kobj) -{ - struct efi_runtime_map_entry *entry; - - entry = to_map_entry(kobj); - kfree(entry); -} - -static struct kobj_type __refdata map_ktype = { - .sysfs_ops = &map_attr_ops, - .default_groups = def_groups, - .release = map_release, -}; - -static struct kset *map_kset; - -static struct efi_runtime_map_entry * -add_sysfs_runtime_map_entry(struct kobject *kobj, int nr, - efi_memory_desc_t *md) -{ - int ret; - struct efi_runtime_map_entry *entry; - - if (!map_kset) { - map_kset = kset_create_and_add("runtime-map", NULL, kobj); - if (!map_kset) - return ERR_PTR(-ENOMEM); - } - - entry = kzalloc(sizeof(*entry), GFP_KERNEL); - if (!entry) { - kset_unregister(map_kset); - map_kset = NULL; - return ERR_PTR(-ENOMEM); - } - - memcpy(&entry->md, md, sizeof(efi_memory_desc_t)); - - kobject_init(&entry->kobj, &map_ktype); - entry->kobj.kset = map_kset; - ret = kobject_add(&entry->kobj, NULL, "%d", nr); - if (ret) { - kobject_put(&entry->kobj); - kset_unregister(map_kset); - map_kset = NULL; - return ERR_PTR(ret); - } - - return entry; -} - -int efi_get_runtime_map_size(void) -{ - return efi.memmap.nr_map * efi.memmap.desc_size; -} - -int efi_get_runtime_map_desc_size(void) -{ - return efi.memmap.desc_size; -} - -int efi_runtime_map_copy(void *buf, size_t bufsz) -{ - size_t sz = efi_get_runtime_map_size(); - - if (sz > bufsz) - sz = bufsz; - - memcpy(buf, efi.memmap.map, sz); - return 0; -} - -int __init efi_runtime_map_init(struct kobject *efi_kobj) -{ - int i, j, ret = 0; - struct efi_runtime_map_entry *entry; - efi_memory_desc_t *md; - - if (!efi_enabled(EFI_MEMMAP)) - return 0; - - map_entries = kcalloc(efi.memmap.nr_map, sizeof(entry), GFP_KERNEL); - if (!map_entries) { - ret = -ENOMEM; - goto out; - } - - i = 0; - for_each_efi_memory_desc(md) { - entry = add_sysfs_runtime_map_entry(efi_kobj, i, md); - if (IS_ERR(entry)) { - ret = PTR_ERR(entry); - goto out_add_entry; - } - *(map_entries + i++) = entry; - } - - return 0; -out_add_entry: - for (j = i - 1; j >= 0; j--) { - entry = *(map_entries + j); - kobject_put(&entry->kobj); - } -out: - return ret; -} diff --git a/drivers/firmware/efi/runtime-wrappers.c b/drivers/firmware/efi/runtime-wrappers.c index f3e54f6616f0..7feee3d9c2bf 100644 --- a/drivers/firmware/efi/runtime-wrappers.c +++ b/drivers/firmware/efi/runtime-wrappers.c @@ -83,6 +83,7 @@ struct efi_runtime_work efi_rts_work; else \ pr_err("Failed to queue work to efi_rts_wq.\n"); \ \ + WARN_ON_ONCE(efi_rts_work.status == EFI_ABORTED); \ exit: \ efi_rts_work.efi_rts_id = EFI_NONE; \ efi_rts_work.status; \ diff --git a/drivers/firmware/efi/x86_fake_mem.c b/drivers/firmware/efi/x86_fake_mem.c deleted file mode 100644 index 0bafcc1bb0f6..000000000000 --- a/drivers/firmware/efi/x86_fake_mem.c +++ /dev/null @@ -1,75 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* Copyright(c) 2019 Intel Corporation. All rights reserved. */ -#include <linux/efi.h> -#include <asm/e820/api.h> -#include "fake_mem.h" - -void __init efi_fake_memmap_early(void) -{ - int i; - - /* - * The late efi_fake_mem() call can handle all requests if - * EFI_MEMORY_SP support is disabled. - */ - if (!efi_soft_reserve_enabled()) - return; - - if (!efi_enabled(EFI_MEMMAP) || !nr_fake_mem) - return; - - /* - * Given that efi_fake_memmap() needs to perform memblock - * allocations it needs to run after e820__memblock_setup(). - * However, if efi_fake_mem specifies EFI_MEMORY_SP for a given - * address range that potentially needs to mark the memory as - * reserved prior to e820__memblock_setup(). Update e820 - * directly if EFI_MEMORY_SP is specified for an - * EFI_CONVENTIONAL_MEMORY descriptor. - */ - for (i = 0; i < nr_fake_mem; i++) { - struct efi_mem_range *mem = &efi_fake_mems[i]; - efi_memory_desc_t *md; - u64 m_start, m_end; - - if ((mem->attribute & EFI_MEMORY_SP) == 0) - continue; - - m_start = mem->range.start; - m_end = mem->range.end; - for_each_efi_memory_desc(md) { - u64 start, end, size; - - if (md->type != EFI_CONVENTIONAL_MEMORY) - continue; - - start = md->phys_addr; - end = md->phys_addr + (md->num_pages << EFI_PAGE_SHIFT) - 1; - - if (m_start <= end && m_end >= start) - /* fake range overlaps descriptor */; - else - continue; - - /* - * Trim the boundary of the e820 update to the - * descriptor in case the fake range overlaps - * !EFI_CONVENTIONAL_MEMORY - */ - start = max(start, m_start); - end = min(end, m_end); - size = end - start + 1; - - if (end <= start) - continue; - - /* - * Ensure each efi_fake_mem instance results in - * a unique e820 resource - */ - e820__range_remove(start, size, E820_TYPE_RAM, 1); - e820__range_add(start, size, E820_TYPE_SOFT_RESERVED); - e820__update_table(e820_table); - } - } -} |