diff options
author | Vinod Koul <vkoul@kernel.org> | 2019-11-14 16:02:51 +0530 |
---|---|---|
committer | Vinod Koul <vkoul@kernel.org> | 2019-11-14 16:02:51 +0530 |
commit | bb5a471de9bfd0853d48d8dc5572469778c2824d (patch) | |
tree | 6c485504e35baa48ee6c3f29f879f6372ac1722d /drivers/dma | |
parent | b37949560b93d01f20687dfb8e1d3b9aa5633d63 (diff) | |
parent | bacdcb6675e170bb2e8d3824da220e10274f42a7 (diff) |
Merge branch 'fixes' into next
Diffstat (limited to 'drivers/dma')
-rw-r--r-- | drivers/dma/imx-sdma.c | 8 | ||||
-rw-r--r-- | drivers/dma/qcom/bam_dma.c | 19 | ||||
-rw-r--r-- | drivers/dma/sprd-dma.c | 27 | ||||
-rw-r--r-- | drivers/dma/tegra210-adma.c | 7 | ||||
-rw-r--r-- | drivers/dma/ti/cppi41.c | 21 | ||||
-rw-r--r-- | drivers/dma/xilinx/xilinx_dma.c | 10 |
6 files changed, 88 insertions, 4 deletions
diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c index 9ba74ab7e912..c27e206a764c 100644 --- a/drivers/dma/imx-sdma.c +++ b/drivers/dma/imx-sdma.c @@ -1707,6 +1707,14 @@ static void sdma_add_scripts(struct sdma_engine *sdma, if (!sdma->script_number) sdma->script_number = SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V1; + if (sdma->script_number > sizeof(struct sdma_script_start_addrs) + / sizeof(s32)) { + dev_err(sdma->dev, + "SDMA script number %d not match with firmware.\n", + sdma->script_number); + return; + } + for (i = 0; i < sdma->script_number; i++) if (addr_arr[i] > 0) saddr_arr[i] = addr_arr[i]; diff --git a/drivers/dma/qcom/bam_dma.c b/drivers/dma/qcom/bam_dma.c index 8e90a405939d..ef73f65224b1 100644 --- a/drivers/dma/qcom/bam_dma.c +++ b/drivers/dma/qcom/bam_dma.c @@ -694,6 +694,25 @@ static int bam_dma_terminate_all(struct dma_chan *chan) /* remove all transactions, including active transaction */ spin_lock_irqsave(&bchan->vc.lock, flag); + /* + * If we have transactions queued, then some might be committed to the + * hardware in the desc fifo. The only way to reset the desc fifo is + * to do a hardware reset (either by pipe or the entire block). + * bam_chan_init_hw() will trigger a pipe reset, and also reinit the + * pipe. If the pipe is left disabled (default state after pipe reset) + * and is accessed by a connected hardware engine, a fatal error in + * the BAM will occur. There is a small window where this could happen + * with bam_chan_init_hw(), but it is assumed that the caller has + * stopped activity on any attached hardware engine. Make sure to do + * this first so that the BAM hardware doesn't cause memory corruption + * by accessing freed resources. + */ + if (!list_empty(&bchan->desc_list)) { + async_desc = list_first_entry(&bchan->desc_list, + struct bam_async_desc, desc_node); + bam_chan_init_hw(bchan, async_desc->dir); + } + list_for_each_entry_safe(async_desc, tmp, &bchan->desc_list, desc_node) { list_add(&async_desc->vd.node, &bchan->vc.desc_issued); diff --git a/drivers/dma/sprd-dma.c b/drivers/dma/sprd-dma.c index ae104ccab7d5..32402c2615de 100644 --- a/drivers/dma/sprd-dma.c +++ b/drivers/dma/sprd-dma.c @@ -134,6 +134,10 @@ #define SPRD_DMA_SRC_TRSF_STEP_OFFSET 0 #define SPRD_DMA_TRSF_STEP_MASK GENMASK(15, 0) +/* SPRD DMA_SRC_BLK_STEP register definition */ +#define SPRD_DMA_LLIST_HIGH_MASK GENMASK(31, 28) +#define SPRD_DMA_LLIST_HIGH_SHIFT 28 + /* define DMA channel mode & trigger mode mask */ #define SPRD_DMA_CHN_MODE_MASK GENMASK(7, 0) #define SPRD_DMA_TRG_MODE_MASK GENMASK(7, 0) @@ -208,6 +212,7 @@ struct sprd_dma_dev { struct sprd_dma_chn channels[0]; }; +static void sprd_dma_free_desc(struct virt_dma_desc *vd); static bool sprd_dma_filter_fn(struct dma_chan *chan, void *param); static struct of_dma_filter_info sprd_dma_info = { .filter_fn = sprd_dma_filter_fn, @@ -609,12 +614,19 @@ static int sprd_dma_alloc_chan_resources(struct dma_chan *chan) static void sprd_dma_free_chan_resources(struct dma_chan *chan) { struct sprd_dma_chn *schan = to_sprd_dma_chan(chan); + struct virt_dma_desc *cur_vd = NULL; unsigned long flags; spin_lock_irqsave(&schan->vc.lock, flags); + if (schan->cur_desc) + cur_vd = &schan->cur_desc->vd; + sprd_dma_stop(schan); spin_unlock_irqrestore(&schan->vc.lock, flags); + if (cur_vd) + sprd_dma_free_desc(cur_vd); + vchan_free_chan_resources(&schan->vc); pm_runtime_put(chan->device->dev); } @@ -717,6 +729,7 @@ static int sprd_dma_fill_desc(struct dma_chan *chan, u32 int_mode = flags & SPRD_DMA_INT_MASK; int src_datawidth, dst_datawidth, src_step, dst_step; u32 temp, fix_mode = 0, fix_en = 0; + phys_addr_t llist_ptr; if (dir == DMA_MEM_TO_DEV) { src_step = sprd_dma_get_step(slave_cfg->src_addr_width); @@ -814,13 +827,16 @@ static int sprd_dma_fill_desc(struct dma_chan *chan, * Set the link-list pointer point to next link-list * configuration's physical address. */ - hw->llist_ptr = schan->linklist.phy_addr + temp; + llist_ptr = schan->linklist.phy_addr + temp; + hw->llist_ptr = lower_32_bits(llist_ptr); + hw->src_blk_step = (upper_32_bits(llist_ptr) << SPRD_DMA_LLIST_HIGH_SHIFT) & + SPRD_DMA_LLIST_HIGH_MASK; } else { hw->llist_ptr = 0; + hw->src_blk_step = 0; } hw->frg_step = 0; - hw->src_blk_step = 0; hw->des_blk_step = 0; return 0; } @@ -1023,15 +1039,22 @@ static int sprd_dma_resume(struct dma_chan *chan) static int sprd_dma_terminate_all(struct dma_chan *chan) { struct sprd_dma_chn *schan = to_sprd_dma_chan(chan); + struct virt_dma_desc *cur_vd = NULL; unsigned long flags; LIST_HEAD(head); spin_lock_irqsave(&schan->vc.lock, flags); + if (schan->cur_desc) + cur_vd = &schan->cur_desc->vd; + sprd_dma_stop(schan); vchan_get_all_descriptors(&schan->vc, &head); spin_unlock_irqrestore(&schan->vc.lock, flags); + if (cur_vd) + sprd_dma_free_desc(cur_vd); + vchan_dma_desc_free_list(&schan->vc, &head); return 0; } diff --git a/drivers/dma/tegra210-adma.c b/drivers/dma/tegra210-adma.c index 5f8adf5c1f20..6e1268552f74 100644 --- a/drivers/dma/tegra210-adma.c +++ b/drivers/dma/tegra210-adma.c @@ -40,6 +40,7 @@ #define ADMA_CH_CONFIG_MAX_BURST_SIZE 16 #define ADMA_CH_CONFIG_WEIGHT_FOR_WRR(val) ((val) & 0xf) #define ADMA_CH_CONFIG_MAX_BUFS 8 +#define TEGRA186_ADMA_CH_CONFIG_OUTSTANDING_REQS(reqs) (reqs << 4) #define ADMA_CH_FIFO_CTRL 0x2c #define TEGRA210_ADMA_CH_FIFO_CTRL_TXSIZE(val) (((val) & 0xf) << 8) @@ -77,6 +78,7 @@ struct tegra_adma; * @ch_req_tx_shift: Register offset for AHUB transmit channel select. * @ch_req_rx_shift: Register offset for AHUB receive channel select. * @ch_base_offset: Register offset of DMA channel registers. + * @has_outstanding_reqs: If DMA channel can have outstanding requests. * @ch_fifo_ctrl: Default value for channel FIFO CTRL register. * @ch_req_mask: Mask for Tx or Rx channel select. * @ch_req_max: Maximum number of Tx or Rx channels available. @@ -95,6 +97,7 @@ struct tegra_adma_chip_data { unsigned int ch_req_max; unsigned int ch_reg_size; unsigned int nr_channels; + bool has_outstanding_reqs; }; /* @@ -594,6 +597,8 @@ static int tegra_adma_set_xfer_params(struct tegra_adma_chan *tdc, ADMA_CH_CTRL_FLOWCTRL_EN; ch_regs->config |= cdata->adma_get_burst_config(burst_size); ch_regs->config |= ADMA_CH_CONFIG_WEIGHT_FOR_WRR(1); + if (cdata->has_outstanding_reqs) + ch_regs->config |= TEGRA186_ADMA_CH_CONFIG_OUTSTANDING_REQS(8); ch_regs->fifo_ctrl = cdata->ch_fifo_ctrl; ch_regs->tc = desc->period_len & ADMA_CH_TC_COUNT_MASK; @@ -778,6 +783,7 @@ static const struct tegra_adma_chip_data tegra210_chip_data = { .ch_req_tx_shift = 28, .ch_req_rx_shift = 24, .ch_base_offset = 0, + .has_outstanding_reqs = false, .ch_fifo_ctrl = TEGRA210_FIFO_CTRL_DEFAULT, .ch_req_mask = 0xf, .ch_req_max = 10, @@ -792,6 +798,7 @@ static const struct tegra_adma_chip_data tegra186_chip_data = { .ch_req_tx_shift = 27, .ch_req_rx_shift = 22, .ch_base_offset = 0x10000, + .has_outstanding_reqs = true, .ch_fifo_ctrl = TEGRA186_FIFO_CTRL_DEFAULT, .ch_req_mask = 0x1f, .ch_req_max = 20, diff --git a/drivers/dma/ti/cppi41.c b/drivers/dma/ti/cppi41.c index 2f946f55076c..8c2f7ebe998c 100644 --- a/drivers/dma/ti/cppi41.c +++ b/drivers/dma/ti/cppi41.c @@ -586,9 +586,22 @@ static struct dma_async_tx_descriptor *cppi41_dma_prep_slave_sg( enum dma_transfer_direction dir, unsigned long tx_flags, void *context) { struct cppi41_channel *c = to_cpp41_chan(chan); + struct dma_async_tx_descriptor *txd = NULL; + struct cppi41_dd *cdd = c->cdd; struct cppi41_desc *d; struct scatterlist *sg; unsigned int i; + int error; + + error = pm_runtime_get(cdd->ddev.dev); + if (error < 0) { + pm_runtime_put_noidle(cdd->ddev.dev); + + return NULL; + } + + if (cdd->is_suspended) + goto err_out_not_ready; d = c->desc; for_each_sg(sgl, sg, sg_len, i) { @@ -611,7 +624,13 @@ static struct dma_async_tx_descriptor *cppi41_dma_prep_slave_sg( d++; } - return &c->txd; + txd = &c->txd; + +err_out_not_ready: + pm_runtime_mark_last_busy(cdd->ddev.dev); + pm_runtime_put_autosuspend(cdd->ddev.dev); + + return txd; } static void cppi41_compute_td_desc(struct cppi41_desc *d) diff --git a/drivers/dma/xilinx/xilinx_dma.c b/drivers/dma/xilinx/xilinx_dma.c index d24d1a2f2bff..a9c5d5cc9f2b 100644 --- a/drivers/dma/xilinx/xilinx_dma.c +++ b/drivers/dma/xilinx/xilinx_dma.c @@ -74,6 +74,9 @@ #define XILINX_DMA_DMACR_CIRC_EN BIT(1) #define XILINX_DMA_DMACR_RUNSTOP BIT(0) #define XILINX_DMA_DMACR_FSYNCSRC_MASK GENMASK(6, 5) +#define XILINX_DMA_DMACR_DELAY_MASK GENMASK(31, 24) +#define XILINX_DMA_DMACR_FRAME_COUNT_MASK GENMASK(23, 16) +#define XILINX_DMA_DMACR_MASTER_MASK GENMASK(11, 8) #define XILINX_DMA_REG_DMASR 0x0004 #define XILINX_DMA_DMASR_EOL_LATE_ERR BIT(15) @@ -1536,7 +1539,8 @@ static void xilinx_dma_start_transfer(struct xilinx_dma_chan *chan) node); hw = &segment->hw; - xilinx_write(chan, XILINX_DMA_REG_SRCDSTADDR, hw->buf_addr); + xilinx_write(chan, XILINX_DMA_REG_SRCDSTADDR, + xilinx_prep_dma_addr_t(hw->buf_addr)); /* Start the transfer */ dma_ctrl_write(chan, XILINX_DMA_REG_BTT, @@ -2459,8 +2463,10 @@ int xilinx_vdma_channel_set_config(struct dma_chan *dchan, chan->config.gen_lock = cfg->gen_lock; chan->config.master = cfg->master; + dmacr &= ~XILINX_DMA_DMACR_GENLOCK_EN; if (cfg->gen_lock && chan->genlock) { dmacr |= XILINX_DMA_DMACR_GENLOCK_EN; + dmacr &= ~XILINX_DMA_DMACR_MASTER_MASK; dmacr |= cfg->master << XILINX_DMA_DMACR_MASTER_SHIFT; } @@ -2476,11 +2482,13 @@ int xilinx_vdma_channel_set_config(struct dma_chan *dchan, chan->config.delay = cfg->delay; if (cfg->coalesc <= XILINX_DMA_DMACR_FRAME_COUNT_MAX) { + dmacr &= ~XILINX_DMA_DMACR_FRAME_COUNT_MASK; dmacr |= cfg->coalesc << XILINX_DMA_DMACR_FRAME_COUNT_SHIFT; chan->config.coalesc = cfg->coalesc; } if (cfg->delay <= XILINX_DMA_DMACR_DELAY_MAX) { + dmacr &= ~XILINX_DMA_DMACR_DELAY_MASK; dmacr |= cfg->delay << XILINX_DMA_DMACR_DELAY_SHIFT; chan->config.delay = cfg->delay; } |