diff options
author | Tony Lindgren <tony@atomide.com> | 2019-01-22 09:03:08 -0800 |
---|---|---|
committer | Tony Lindgren <tony@atomide.com> | 2019-01-29 07:41:15 -0800 |
commit | 9bd34c63f5536c490c152833c77fa47f59aeade3 (patch) | |
tree | fdfd0f6f6d1f42e06fbb5715adb59c8f734fff6b /drivers/clocksource | |
parent | 983a5a43ec254cd5ddf3254db80ca96e8f8bb2a4 (diff) |
bus: ti-sysc: Fix timer handling with drop pm_runtime_irq_safe()
Commit 84badc5ec5fc ("ARM: dts: omap4: Move l4 child devices to probe
them with ti-sysc") started producing a warning for pwm-omap-dmtimer:
WARNING: CPU: 0 PID: 77 at drivers/bus/omap_l3_noc.c:147
l3_interrupt_handler+0x2f8/0x388
44000000.ocp:L3 Custom Error: MASTER MPU TARGET L4PER2 (Idle):
Data Access in Supervisor mode during Functional access
...
__pm_runtime_idle
omap_dm_timer_disable
pwm_omap_dmtimer_start
pwm_omap_dmtimer_enable
pwm_apply_state
pwm_vibrator_start
pwm_vibrator_play_work
This is because the timer that pwm-omap-dmtimer is using is now being
probed with ti-sysc interconnect target module instead of omap_device
and the ti-sysc quirk for SYSC_QUIRK_LEGACY_IDLE is not fully
compatible with what omap_device has been doing.
We could fix this by reverting the timer changes and have the timer
probe again with omap_device. Or we could add more quirk handling to
ti-sysc driver. But as these options don't work nicely as longer term
solutions, let's just make timers probe with ti-sysc without any
quirks.
To do this, all we need to do is remove quirks for timers for ti-sysc,
and drop the bogus pm_runtime_irq_safe() flag for timer-ti-dm.
We should not use pm_runtime_irq_safe() anyways for drivers as it will
take a permanent use count on the parent device blocking the parent
devices from idling and has been forcing ti-sysc driver to use a
quirk flag.
Note that we will move the timer data to DEBUG section later on in
clean-up patches.
Fixes: 84badc5ec5fc ("ARM: dts: omap4: Move l4 child devices to probe them with ti-sysc")
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: H. Nikolaus Schaller <hns@goldelico.com>
Cc: Keerthy <j-keerthy@ti.com>
Cc: Ladislav Michl <ladis@linux-mips.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Sebastian Reichel <sre@kernel.org>
Cc: Tero Kristo <t-kristo@ti.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Reported-by: H. Nikolaus Schaller <hns@goldelico.com>
Tested-By: Andreas Kemnade <andreas@kemnade.info>
Tested-By: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Diffstat (limited to 'drivers/clocksource')
-rw-r--r-- | drivers/clocksource/timer-ti-dm.c | 1 |
1 files changed, 0 insertions, 1 deletions
diff --git a/drivers/clocksource/timer-ti-dm.c b/drivers/clocksource/timer-ti-dm.c index 3ecf84706640..23414dddc3ba 100644 --- a/drivers/clocksource/timer-ti-dm.c +++ b/drivers/clocksource/timer-ti-dm.c @@ -868,7 +868,6 @@ static int omap_dm_timer_probe(struct platform_device *pdev) timer->pdev = pdev; pm_runtime_enable(dev); - pm_runtime_irq_safe(dev); if (!timer->reserved) { ret = pm_runtime_get_sync(dev); |