diff options
author | Viresh Kumar <viresh.kumar@st.com> | 2012-04-10 09:02:35 +0530 |
---|---|---|
committer | Arnd Bergmann <arnd@arndb.de> | 2012-05-12 21:19:23 +0200 |
commit | 55b8fd4f428501b0f35d62b8313311fd9863c188 (patch) | |
tree | 2c61fe9c307baa73048345adbb11e20e5eeb586e /drivers/clk | |
parent | e12ff34402bd3a6cbeab0423012066874bb10f4b (diff) |
SPEAr: clk: Add VCO-PLL Synthesizer clock
All SPEAr SoC's contain PLLs. Their Fout is derived based on following equations
- In normal mode
vco = (2 * M[15:8] * Fin)/N
- In Dithered mode
vco = (2 * M[15:0] * Fin)/(256 * N)
pll_rate = vco/2^p
vco and pll are very closely bound to each other,
"vco needs to program: mode, m & n" and "pll needs to program p",
both share common enable/disable logic and registers.
This patch adds in support for this type of clock.
Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
Reviewed-by: Mike Turquette <mturquette@linaro.org>
Diffstat (limited to 'drivers/clk')
-rw-r--r-- | drivers/clk/Makefile | 3 | ||||
-rw-r--r-- | drivers/clk/spear/Makefile | 5 | ||||
-rw-r--r-- | drivers/clk/spear/clk-vco-pll.c | 363 | ||||
-rw-r--r-- | drivers/clk/spear/clk.c | 36 | ||||
-rw-r--r-- | drivers/clk/spear/clk.h | 58 |
5 files changed, 465 insertions, 0 deletions
diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile index 24aa7144811b..0f5e03d1ef5c 100644 --- a/drivers/clk/Makefile +++ b/drivers/clk/Makefile @@ -2,3 +2,6 @@ obj-$(CONFIG_CLKDEV_LOOKUP) += clkdev.o obj-$(CONFIG_COMMON_CLK) += clk.o clk-fixed-rate.o clk-gate.o \ clk-mux.o clk-divider.o clk-fixed-factor.o + +# SoCs specific +obj-$(CONFIG_PLAT_SPEAR) += spear/ diff --git a/drivers/clk/spear/Makefile b/drivers/clk/spear/Makefile new file mode 100644 index 000000000000..3fc2a3026cc1 --- /dev/null +++ b/drivers/clk/spear/Makefile @@ -0,0 +1,5 @@ +# +# SPEAr Clock specific Makefile +# + +obj-y += clk.o clk-vco-pll.o diff --git a/drivers/clk/spear/clk-vco-pll.c b/drivers/clk/spear/clk-vco-pll.c new file mode 100644 index 000000000000..dcd4bdf4b0d9 --- /dev/null +++ b/drivers/clk/spear/clk-vco-pll.c @@ -0,0 +1,363 @@ +/* + * Copyright (C) 2012 ST Microelectronics + * Viresh Kumar <viresh.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + * + * VCO-PLL clock implementation + */ + +#define pr_fmt(fmt) "clk-vco-pll: " fmt + +#include <linux/clk-provider.h> +#include <linux/slab.h> +#include <linux/io.h> +#include <linux/err.h> +#include "clk.h" + +/* + * DOC: VCO-PLL clock + * + * VCO and PLL rate are derived from following equations: + * + * In normal mode + * vco = (2 * M[15:8] * Fin)/N + * + * In Dithered mode + * vco = (2 * M[15:0] * Fin)/(256 * N) + * + * pll_rate = pll/2^p + * + * vco and pll are very closely bound to each other, "vco needs to program: + * mode, m & n" and "pll needs to program p", both share common enable/disable + * logic. + * + * clk_register_vco_pll() registers instances of both vco & pll. + * CLK_SET_RATE_PARENT flag is forced for pll, as it will always pass its + * set_rate to vco. A single rate table exists for both the clocks, which + * configures m, n and p. + */ + +/* PLL_CTR register masks */ +#define PLL_MODE_NORMAL 0 +#define PLL_MODE_FRACTION 1 +#define PLL_MODE_DITH_DSM 2 +#define PLL_MODE_DITH_SSM 3 +#define PLL_MODE_MASK 3 +#define PLL_MODE_SHIFT 3 +#define PLL_ENABLE 2 + +#define PLL_LOCK_SHIFT 0 +#define PLL_LOCK_MASK 1 + +/* PLL FRQ register masks */ +#define PLL_NORM_FDBK_M_MASK 0xFF +#define PLL_NORM_FDBK_M_SHIFT 24 +#define PLL_DITH_FDBK_M_MASK 0xFFFF +#define PLL_DITH_FDBK_M_SHIFT 16 +#define PLL_DIV_P_MASK 0x7 +#define PLL_DIV_P_SHIFT 8 +#define PLL_DIV_N_MASK 0xFF +#define PLL_DIV_N_SHIFT 0 + +#define to_clk_vco(_hw) container_of(_hw, struct clk_vco, hw) +#define to_clk_pll(_hw) container_of(_hw, struct clk_pll, hw) + +/* Calculates pll clk rate for specific value of mode, m, n and p */ +static unsigned long pll_calc_rate(struct pll_rate_tbl *rtbl, + unsigned long prate, int index, unsigned long *pll_rate) +{ + unsigned long rate = prate; + unsigned int mode; + + mode = rtbl[index].mode ? 256 : 1; + rate = (((2 * rate / 10000) * rtbl[index].m) / (mode * rtbl[index].n)); + + if (pll_rate) + *pll_rate = (rate / (1 << rtbl[index].p)) * 10000; + + return rate * 10000; +} + +static long clk_pll_round_rate_index(struct clk_hw *hw, unsigned long drate, + unsigned long *prate, int *index) +{ + struct clk_pll *pll = to_clk_pll(hw); + unsigned long prev_rate, vco_prev_rate, rate = 0; + unsigned long vco_parent_rate = + __clk_get_rate(__clk_get_parent(__clk_get_parent(hw->clk))); + + if (!prate) { + pr_err("%s: prate is must for pll clk\n", __func__); + return -EINVAL; + } + + for (*index = 0; *index < pll->vco->rtbl_cnt; (*index)++) { + prev_rate = rate; + vco_prev_rate = *prate; + *prate = pll_calc_rate(pll->vco->rtbl, vco_parent_rate, *index, + &rate); + if (drate < rate) { + /* previous clock was best */ + if (*index) { + rate = prev_rate; + *prate = vco_prev_rate; + (*index)--; + } + break; + } + } + + return rate; +} + +static long clk_pll_round_rate(struct clk_hw *hw, unsigned long drate, + unsigned long *prate) +{ + int unused; + + return clk_pll_round_rate_index(hw, drate, prate, &unused); +} + +static unsigned long clk_pll_recalc_rate(struct clk_hw *hw, unsigned long + parent_rate) +{ + struct clk_pll *pll = to_clk_pll(hw); + unsigned long flags = 0; + unsigned int p; + + if (pll->vco->lock) + spin_lock_irqsave(pll->vco->lock, flags); + + p = readl_relaxed(pll->vco->cfg_reg); + + if (pll->vco->lock) + spin_unlock_irqrestore(pll->vco->lock, flags); + + p = (p >> PLL_DIV_P_SHIFT) & PLL_DIV_P_MASK; + + return parent_rate / (1 << p); +} + +static int clk_pll_set_rate(struct clk_hw *hw, unsigned long drate, + unsigned long prate) +{ + struct clk_pll *pll = to_clk_pll(hw); + struct pll_rate_tbl *rtbl = pll->vco->rtbl; + unsigned long flags = 0, val; + int i; + + clk_pll_round_rate_index(hw, drate, NULL, &i); + + if (pll->vco->lock) + spin_lock_irqsave(pll->vco->lock, flags); + + val = readl_relaxed(pll->vco->cfg_reg); + val &= ~(PLL_DIV_P_MASK << PLL_DIV_P_SHIFT); + val |= (rtbl[i].p & PLL_DIV_P_MASK) << PLL_DIV_P_SHIFT; + writel_relaxed(val, pll->vco->cfg_reg); + + if (pll->vco->lock) + spin_unlock_irqrestore(pll->vco->lock, flags); + + return 0; +} + +static struct clk_ops clk_pll_ops = { + .recalc_rate = clk_pll_recalc_rate, + .round_rate = clk_pll_round_rate, + .set_rate = clk_pll_set_rate, +}; + +static inline unsigned long vco_calc_rate(struct clk_hw *hw, + unsigned long prate, int index) +{ + struct clk_vco *vco = to_clk_vco(hw); + + return pll_calc_rate(vco->rtbl, prate, index, NULL); +} + +static long clk_vco_round_rate(struct clk_hw *hw, unsigned long drate, + unsigned long *prate) +{ + struct clk_vco *vco = to_clk_vco(hw); + int unused; + + return clk_round_rate_index(hw, drate, *prate, vco_calc_rate, + vco->rtbl_cnt, &unused); +} + +static unsigned long clk_vco_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct clk_vco *vco = to_clk_vco(hw); + unsigned long flags = 0; + unsigned int num = 2, den = 0, val, mode = 0; + + if (vco->lock) + spin_lock_irqsave(vco->lock, flags); + + mode = (readl_relaxed(vco->mode_reg) >> PLL_MODE_SHIFT) & PLL_MODE_MASK; + + val = readl_relaxed(vco->cfg_reg); + + if (vco->lock) + spin_unlock_irqrestore(vco->lock, flags); + + den = (val >> PLL_DIV_N_SHIFT) & PLL_DIV_N_MASK; + + /* calculate numerator & denominator */ + if (!mode) { + /* Normal mode */ + num *= (val >> PLL_NORM_FDBK_M_SHIFT) & PLL_NORM_FDBK_M_MASK; + } else { + /* Dithered mode */ + num *= (val >> PLL_DITH_FDBK_M_SHIFT) & PLL_DITH_FDBK_M_MASK; + den *= 256; + } + + if (!den) { + WARN(1, "%s: denominator can't be zero\n", __func__); + return 0; + } + + return (((parent_rate / 10000) * num) / den) * 10000; +} + +/* Configures new clock rate of vco */ +static int clk_vco_set_rate(struct clk_hw *hw, unsigned long drate, + unsigned long prate) +{ + struct clk_vco *vco = to_clk_vco(hw); + struct pll_rate_tbl *rtbl = vco->rtbl; + unsigned long flags = 0, val; + int i; + + clk_round_rate_index(hw, drate, prate, vco_calc_rate, vco->rtbl_cnt, + &i); + + if (vco->lock) + spin_lock_irqsave(vco->lock, flags); + + val = readl_relaxed(vco->mode_reg); + val &= ~(PLL_MODE_MASK << PLL_MODE_SHIFT); + val |= (rtbl[i].mode & PLL_MODE_MASK) << PLL_MODE_SHIFT; + writel_relaxed(val, vco->mode_reg); + + val = readl_relaxed(vco->cfg_reg); + val &= ~(PLL_DIV_N_MASK << PLL_DIV_N_SHIFT); + val |= (rtbl[i].n & PLL_DIV_N_MASK) << PLL_DIV_N_SHIFT; + + val &= ~(PLL_DITH_FDBK_M_MASK << PLL_DITH_FDBK_M_SHIFT); + if (rtbl[i].mode) + val |= (rtbl[i].m & PLL_DITH_FDBK_M_MASK) << + PLL_DITH_FDBK_M_SHIFT; + else + val |= (rtbl[i].m & PLL_NORM_FDBK_M_MASK) << + PLL_NORM_FDBK_M_SHIFT; + + writel_relaxed(val, vco->cfg_reg); + + if (vco->lock) + spin_unlock_irqrestore(vco->lock, flags); + + return 0; +} + +static struct clk_ops clk_vco_ops = { + .recalc_rate = clk_vco_recalc_rate, + .round_rate = clk_vco_round_rate, + .set_rate = clk_vco_set_rate, +}; + +struct clk *clk_register_vco_pll(const char *vco_name, const char *pll_name, + const char *vco_gate_name, const char *parent_name, + unsigned long flags, void __iomem *mode_reg, void __iomem + *cfg_reg, struct pll_rate_tbl *rtbl, u8 rtbl_cnt, + spinlock_t *lock, struct clk **pll_clk, + struct clk **vco_gate_clk) +{ + struct clk_vco *vco; + struct clk_pll *pll; + struct clk *vco_clk, *tpll_clk, *tvco_gate_clk; + struct clk_init_data vco_init, pll_init; + const char **vco_parent_name; + + if (!vco_name || !pll_name || !parent_name || !mode_reg || !cfg_reg || + !rtbl || !rtbl_cnt) { + pr_err("Invalid arguments passed"); + return ERR_PTR(-EINVAL); + } + + vco = kzalloc(sizeof(*vco), GFP_KERNEL); + if (!vco) { + pr_err("could not allocate vco clk\n"); + return ERR_PTR(-ENOMEM); + } + + pll = kzalloc(sizeof(*pll), GFP_KERNEL); + if (!pll) { + pr_err("could not allocate pll clk\n"); + goto free_vco; + } + + /* struct clk_vco assignments */ + vco->mode_reg = mode_reg; + vco->cfg_reg = cfg_reg; + vco->rtbl = rtbl; + vco->rtbl_cnt = rtbl_cnt; + vco->lock = lock; + vco->hw.init = &vco_init; + + pll->vco = vco; + pll->hw.init = &pll_init; + + if (vco_gate_name) { + tvco_gate_clk = clk_register_gate(NULL, vco_gate_name, + parent_name, 0, mode_reg, PLL_ENABLE, 0, lock); + if (IS_ERR_OR_NULL(tvco_gate_clk)) + goto free_pll; + + if (vco_gate_clk) + *vco_gate_clk = tvco_gate_clk; + vco_parent_name = &vco_gate_name; + } else { + vco_parent_name = &parent_name; + } + + vco_init.name = vco_name; + vco_init.ops = &clk_vco_ops; + vco_init.flags = flags; + vco_init.parent_names = vco_parent_name; + vco_init.num_parents = 1; + + pll_init.name = pll_name; + pll_init.ops = &clk_pll_ops; + pll_init.flags = CLK_SET_RATE_PARENT; + pll_init.parent_names = &vco_name; + pll_init.num_parents = 1; + + vco_clk = clk_register(NULL, &vco->hw); + if (IS_ERR_OR_NULL(vco_clk)) + goto free_pll; + + tpll_clk = clk_register(NULL, &pll->hw); + if (IS_ERR_OR_NULL(tpll_clk)) + goto free_pll; + + if (pll_clk) + *pll_clk = tpll_clk; + + return vco_clk; + +free_pll: + kfree(pll); +free_vco: + kfree(vco); + + pr_err("Failed to register vco pll clock\n"); + + return ERR_PTR(-ENOMEM); +} diff --git a/drivers/clk/spear/clk.c b/drivers/clk/spear/clk.c new file mode 100644 index 000000000000..376d4e5ff326 --- /dev/null +++ b/drivers/clk/spear/clk.c @@ -0,0 +1,36 @@ +/* + * Copyright (C) 2012 ST Microelectronics + * Viresh Kumar <viresh.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + * + * SPEAr clk - Common routines + */ + +#include <linux/clk-provider.h> +#include <linux/types.h> +#include "clk.h" + +long clk_round_rate_index(struct clk_hw *hw, unsigned long drate, + unsigned long parent_rate, clk_calc_rate calc_rate, u8 rtbl_cnt, + int *index) +{ + unsigned long prev_rate, rate = 0; + + for (*index = 0; *index < rtbl_cnt; (*index)++) { + prev_rate = rate; + rate = calc_rate(hw, parent_rate, *index); + if (drate < rate) { + /* previous clock was best */ + if (*index) { + rate = prev_rate; + (*index)--; + } + break; + } + } + + return rate; +} diff --git a/drivers/clk/spear/clk.h b/drivers/clk/spear/clk.h new file mode 100644 index 000000000000..9979b7f7e767 --- /dev/null +++ b/drivers/clk/spear/clk.h @@ -0,0 +1,58 @@ +/* + * Clock framework definitions for SPEAr platform + * + * Copyright (C) 2012 ST Microelectronics + * Viresh Kumar <viresh.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __SPEAR_CLK_H +#define __SPEAR_CLK_H + +#include <linux/clk-provider.h> +#include <linux/spinlock_types.h> +#include <linux/types.h> + +/* VCO-PLL clk */ +struct pll_rate_tbl { + u8 mode; + u16 m; + u8 n; + u8 p; +}; + +struct clk_vco { + struct clk_hw hw; + void __iomem *mode_reg; + void __iomem *cfg_reg; + struct pll_rate_tbl *rtbl; + u8 rtbl_cnt; + spinlock_t *lock; +}; + +struct clk_pll { + struct clk_hw hw; + struct clk_vco *vco; + const char *parent[1]; + spinlock_t *lock; +}; + +typedef unsigned long (*clk_calc_rate)(struct clk_hw *hw, unsigned long prate, + int index); + +/* clk register routines */ +struct clk *clk_register_vco_pll(const char *vco_name, const char *pll_name, + const char *vco_gate_name, const char *parent_name, + unsigned long flags, void __iomem *mode_reg, void __iomem + *cfg_reg, struct pll_rate_tbl *rtbl, u8 rtbl_cnt, + spinlock_t *lock, struct clk **pll_clk, + struct clk **vco_gate_clk); + +long clk_round_rate_index(struct clk_hw *hw, unsigned long drate, + unsigned long parent_rate, clk_calc_rate calc_rate, u8 rtbl_cnt, + int *index); + +#endif /* __SPEAR_CLK_H */ |