Merge branches 'clk-socfpga', 'clk-doc', 'clk-qcom', 'clk-vc5' and 'clk-bcm' into clk-next

 - Enable CPU clks on Qualcomm IPQ6018 SoCs
 - Enable CPU clks on Qualcomm MSM8996 SoCs
 - GPU clk support for Qualcomm SM8150 and SM8250 SoCs
 - Audio clks on Qualcomm SC7180 SoCs
 - Make defines for bcm63xx-gate clks to use in DT
 - Support gate clks on BCM6318 SoCs
 - Add HDMI clks for BCM2711 SoCs
 - Support BCM2711 SoC firmware clks

* clk-socfpga:
  clk: socfpga: agilex: mpu_l2ram_clk should be mpu_ccu_clk
  clk: socfpga: agilex: add nand_x_clk and nand_ecc_clk
  dt-bindings: agilex: add NAND_X_CLK and NAND_ECC_CLK

* clk-doc:
  clk: Clean up kernel-doc errors
  clk: <linux/clk-provider.h>: drop a duplicated word
  clk: add function documentation for clk_hw_round_rate()

* clk-qcom: (38 commits)
  dt-bindings: clock: Fix YAML schemas for LPASS clocks on SC7180
  clk: qcom: gcc-sdm660: Fix up gcc_mss_mnoc_bimc_axi_clk
  clk: qcom: gcc-sdm660: Add missing modem reset
  clk: qcom: lpass: Add support for LPASS clock controller for SC7180
  clk: qcom: gcc: Add support for GCC LPASS clock for SC7180
  dt-bindings: clock: Add YAML schemas for LPASS clocks on SC7180
  clk: qcom: gdsc: Add support to enable retention of GSDCR
  clk: qcom: Export gdsc_gx_do_nothing_enable() to modules
  clk: qcom: Add graphics clock controller driver for SM8250
  clk: qcom: Add graphics clock controller driver for SM8150
  clk: qcom: add common gdsc_gx_do_nothing_enable for gpucc drivers
  dt-bindings: clock: add SM8250 QCOM Graphics clock bindings
  dt-bindings: clock: add SM8150 QCOM Graphics clock bindings
  dt-bindings: clock: combine qcom,sdm845-gpucc and qcom,sc7180-gpucc
  clk: qcom: gcc: remove unnecessary vco_table from SM8150
  clk: qcom: clk-alpha-pll: use the right PCAL_DONE value for lucid pll
  clk: qcom: clk-alpha-pll: same regs and ops for trion and lucid
  clk: qcom: clk-alpha-pll: remove unused/incorrect PLL_CAL_VAL
  clk: qcom: gcc: fix sm8150 GPU and NPU clocks
  dt-bindings: clock: Fix qcom,msm8996-apcc yaml syntax
  ...

* clk-vc5:
  clk: vc5: use a dedicated struct to describe the output drivers
  dt-bindings: clk: versaclock5: convert to yaml
  MAINTAINERS: take over IDT VersaClock 5 clock driver
  dt-bindings: clk: versaclock5: fix 'idt' prefix typos
  clk: vc5: Add memory check to prevent oops
  clk: vc5: fix use of memory after it has been kfree'd
  clk: vc5: Enable addition output configurations of the Versaclock
  dt: Add additional option bindings for IDT VersaClock
  clk: vc5: Allow Versaclock driver to support multiple instances

* clk-bcm: (44 commits)
  clk: bcm2835: Do not use prediv with bcm2711's PLLs
  dt-bindings: arm: bcm: Add a select to the RPI Firmware binding
  clk: bcm: dvp: Add missing module informations
  clk: bcm: rpi: Remove the quirks for the CPU clock
  clk: bcm2835: Don't cache the PLLB rate
  clk: bcm2835: Allow custom CCF flags for the PLLs
  Revert "clk: bcm2835: remove pllb"
  clk: bcm: rpi: Give firmware clocks a name
  clk: bcm: rpi: Discover the firmware clocks
  clk: bcm: rpi: Add an enum for the firmware clocks
  clk: bcm: rpi: Add DT provider for the clocks
  clk: bcm: rpi: Make the PLLB registration function return a clk_hw
  clk: bcm: rpi: Split pllb clock hooks
  clk: bcm: rpi: Rename is_prepared function
  clk: bcm: rpi: Pass the clocks data to the firmware function
  clk: bcm: rpi: Add clock id to data
  clk: bcm: rpi: Create a data structure for the clocks
  clk: bcm: rpi: Use CCF boundaries instead of rolling our own
  clk: bcm: rpi: Make sure the clkdev lookup is removed
  clk: bcm: rpi: Switch to clk_hw_register_clkdev
  ...