Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk updates from Stephen Boyd:
 "This time we have a good set of changes to the core framework that do
  some general cleanups, but nothing too major. The majority of the diff
  goes to two SoCs, Actions Semi and Qualcomm. A brand new driver is
  introduced for Actions Semi so it takes up some lines to add all the
  different types, and the Qualcomm diff is there because we add support
  for two SoCs and it's quite a bit of data.

  Otherwise the big driver updates are on TI Davinci and Amlogic
  platforms. And then the long tail of driver updates for various fixes
  and stuff follows after that.

  Core:
   - debugfs cleanups removing error checking and an unused provider API
   - Removal of a clk init typedef that isn't used
   - Usage of match_string() to simplify parent string name matching
   - OF clk helpers moved to their own file (linux/of_clk.h)
   - Make clk warnings more readable across kernel versions

  New Drivers:
   - Qualcomm SDM845 GCC and Video clk controllers
   - Qualcomm MSM8998 GCC
   - Actions Semi S900 SoC support
   - Nuvoton npcm750 microcontroller clks
   - Amlogic axg AO clock controller

  Removed Drivers:
   - Deprecated Rockchip clk-gate driver

  Updates:
   - debugfs functions stopped checking return values
   - Support for the MSIOF module clocks on Rensas R-Car M3-N
   - Support for the new Rensas RZ/G1C and R-Car E3 SoCs
   - Qualcomm GDSC, RCG, and PLL updates for clk changes in new SoCs
   - Berlin and Amlogic SPDX tagging
   - Usage of of_clk_get_parent_count() in more places
   - Proper implementation of the CDEV1/2 clocks on Tegra20
   - Allwinner H6 PRCM clock support and R40 EMAC support
   - Add critical flag to meson8b's fdiv2 as temporary fixup for ethernet
   - Round closest support for meson's mpll driver
   - Support for meson8b nand clocks and gxbb video decoder clocks
   - Mediatek mali clks
   - STM32MP1 fixes
   - Uniphier LD11/LD20 stream demux system clock"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (134 commits)
  clk: qcom: Export clk_fabia_pll_configure()
  clk: bcm: Update and add Stingray clock entries
  dt-bindings: clk: Update Stingray binding doc
  clk-si544: Properly round requested frequency to nearest match
  clk: ingenic: jz4770: Add 150us delay after enabling VPU clock
  clk: ingenic: jz4770: Enable power of AHB1 bus after ungating VPU clock
  clk: ingenic: jz4770: Modify C1CLK clock to disable CPU clock stop on idle
  clk: ingenic: jz4770: Change OTG from custom to standard gated clock
  clk: ingenic: Support specifying "wait for clock stable" delay
  clk: ingenic: Add support for clocks whose gate bit is inverted
  clk: use match_string() helper
  clk: bcm2835: use match_string() helper
  clk: Return void from debug_init op
  clk: remove clk_debugfs_add_file()
  clk: tegra: no need to check return value of debugfs_create functions
  clk: davinci: no need to check return value of debugfs_create functions
  clk: bcm2835: no need to check return value of debugfs_create functions
  clk: no need to check return value of debugfs_create functions
  clk: imx6: add EPIT clock support
  clk: mvebu: use correct bit for 98DX3236 NAND
  ...

2 files changed, 138 insertions, 39 deletions

diff --git a/drivers/clk/bcm/clk-bcm2835.c b/drivers/clk/bcm/clk-bcm2835.c
index 6d4e69edfb36..9e0b2f2b48e7 100644
--- a/drivers/clk/bcm/clk-bcm2835.c
+++ b/drivers/clk/bcm/clk-bcm2835.c
@@ -394,25 +394,21 @@ out:
 	return count * 1000;
 }
 
-static int bcm2835_debugfs_regset(struct bcm2835_cprman *cprman, u32 base,
+static void bcm2835_debugfs_regset(struct bcm2835_cprman *cprman, u32 base,
 				  struct debugfs_reg32 *regs, size_t nregs,
 				  struct dentry *dentry)
 {
-	struct dentry *regdump;
 	struct debugfs_regset32 *regset;
 
 	regset = devm_kzalloc(cprman->dev, sizeof(*regset), GFP_KERNEL);
 	if (!regset)
-		return -ENOMEM;
+		return;
 
 	regset->regs = regs;
 	regset->nregs = nregs;
 	regset->base = cprman->regs + base;
 
-	regdump = debugfs_create_regset32("regdump", S_IRUGO, dentry,
-					  regset);
-
-	return regdump ? 0 : -ENOMEM;
+	debugfs_create_regset32("regdump", S_IRUGO, dentry, regset);
 }
 
 struct bcm2835_pll_data {
@@ -730,7 +726,7 @@ static int bcm2835_pll_set_rate(struct clk_hw *hw,
 	return 0;
 }
 
-static int bcm2835_pll_debug_init(struct clk_hw *hw,
+static void bcm2835_pll_debug_init(struct clk_hw *hw,
 				  struct dentry *dentry)
 {
 	struct bcm2835_pll *pll = container_of(hw, struct bcm2835_pll, hw);
@@ -740,7 +736,7 @@ static int bcm2835_pll_debug_init(struct clk_hw *hw,
 
 	regs = devm_kzalloc(cprman->dev, 7 * sizeof(*regs), GFP_KERNEL);
 	if (!regs)
-		return -ENOMEM;
+		return;
 
 	regs[0].name = "cm_ctrl";
 	regs[0].offset = data->cm_ctrl_reg;
@@ -757,7 +753,7 @@ static int bcm2835_pll_debug_init(struct clk_hw *hw,
 	regs[6].name = "ana3";
 	regs[6].offset = data->ana_reg_base + 3 * 4;
 
-	return bcm2835_debugfs_regset(cprman, 0, regs, 7, dentry);
+	bcm2835_debugfs_regset(cprman, 0, regs, 7, dentry);
 }
 
 static const struct clk_ops bcm2835_pll_clk_ops = {
@@ -861,8 +857,8 @@ static int bcm2835_pll_divider_set_rate(struct clk_hw *hw,
 	return 0;
 }
 
-static int bcm2835_pll_divider_debug_init(struct clk_hw *hw,
-					  struct dentry *dentry)
+static void bcm2835_pll_divider_debug_init(struct clk_hw *hw,
+					   struct dentry *dentry)
 {
 	struct bcm2835_pll_divider *divider = bcm2835_pll_divider_from_hw(hw);
 	struct bcm2835_cprman *cprman = divider->cprman;
@@ -871,14 +867,14 @@ static int bcm2835_pll_divider_debug_init(struct clk_hw *hw,
 
 	regs = devm_kzalloc(cprman->dev, 7 * sizeof(*regs), GFP_KERNEL);
 	if (!regs)
-		return -ENOMEM;
+		return;
 
 	regs[0].name = "cm";
 	regs[0].offset = data->cm_reg;
 	regs[1].name = "a2w";
 	regs[1].offset = data->a2w_reg;
 
-	return bcm2835_debugfs_regset(cprman, 0, regs, 2, dentry);
+	bcm2835_debugfs_regset(cprman, 0, regs, 2, dentry);
 }
 
 static const struct clk_ops bcm2835_pll_divider_clk_ops = {
@@ -1254,15 +1250,14 @@ static struct debugfs_reg32 bcm2835_debugfs_clock_reg32[] = {
 	},
 };
 
-static int bcm2835_clock_debug_init(struct clk_hw *hw,
+static void bcm2835_clock_debug_init(struct clk_hw *hw,
 				    struct dentry *dentry)
 {
 	struct bcm2835_clock *clock = bcm2835_clock_from_hw(hw);
 	struct bcm2835_cprman *cprman = clock->cprman;
 	const struct bcm2835_clock_data *data = clock->data;
 
-	return bcm2835_debugfs_regset(
-		cprman, data->ctl_reg,
+	bcm2835_debugfs_regset(cprman, data->ctl_reg,
 		bcm2835_debugfs_clock_reg32,
 		ARRAY_SIZE(bcm2835_debugfs_clock_reg32),
 		dentry);
@@ -1395,7 +1390,7 @@ static struct clk_hw *bcm2835_register_clock(struct bcm2835_cprman *cprman,
 	struct bcm2835_clock *clock;
 	struct clk_init_data init;
 	const char *parents[1 << CM_SRC_BITS];
-	size_t i, j;
+	size_t i;
 	int ret;
 
 	/*
@@ -1405,12 +1400,11 @@ static struct clk_hw *bcm2835_register_clock(struct bcm2835_cprman *cprman,
 	for (i = 0; i < data->num_mux_parents; i++) {
 		parents[i] = data->parents[i];
 
-		for (j = 0; j < ARRAY_SIZE(cprman_parent_names); j++) {
-			if (strcmp(parents[i], cprman_parent_names[j]) == 0) {
-				parents[i] = cprman->real_parent_names[j];
-				break;
-			}
-		}
+		ret = match_string(cprman_parent_names,
+				   ARRAY_SIZE(cprman_parent_names),
+				   parents[i]);
+		if (ret >= 0)
+			parents[i] = cprman->real_parent_names[ret];
 	}
 
 	memset(&init, 0, sizeof(init));
diff --git a/drivers/clk/bcm/clk-sr.c b/drivers/clk/bcm/clk-sr.c
index adc74f4584cf..7b9efc0212a8 100644
--- a/drivers/clk/bcm/clk-sr.c
+++ b/drivers/clk/bcm/clk-sr.c
@@ -56,8 +56,8 @@ static const struct iproc_pll_ctrl sr_genpll0 = {
 };
 
 static const struct iproc_clk_ctrl sr_genpll0_clk[] = {
-	[BCM_SR_GENPLL0_SATA_CLK] = {
-		.channel = BCM_SR_GENPLL0_SATA_CLK,
+	[BCM_SR_GENPLL0_125M_CLK] = {
+		.channel = BCM_SR_GENPLL0_125M_CLK,
 		.flags = IPROC_CLK_AON,
 		.enable = ENABLE_VAL(0x4, 6, 0, 12),
 		.mdiv = REG_VAL(0x18, 0, 9),
@@ -102,6 +102,65 @@ static int sr_genpll0_clk_init(struct platform_device *pdev)
 	return 0;
 }
 
+static const struct iproc_pll_ctrl sr_genpll2 = {
+	.flags = IPROC_CLK_AON | IPROC_CLK_PLL_HAS_NDIV_FRAC |
+		IPROC_CLK_PLL_NEEDS_SW_CFG,
+	.aon = AON_VAL(0x0, 1, 13, 12),
+	.reset = RESET_VAL(0x0, 12, 11),
+	.dig_filter = DF_VAL(0x0, 4, 3, 0, 4, 7, 3),
+	.sw_ctrl = SW_CTRL_VAL(0x10, 31),
+	.ndiv_int = REG_VAL(0x10, 20, 10),
+	.ndiv_frac = REG_VAL(0x10, 0, 20),
+	.pdiv = REG_VAL(0x14, 0, 4),
+	.status = REG_VAL(0x30, 12, 1),
+};
+
+static const struct iproc_clk_ctrl sr_genpll2_clk[] = {
+	[BCM_SR_GENPLL2_NIC_CLK] = {
+		.channel = BCM_SR_GENPLL2_NIC_CLK,
+		.flags = IPROC_CLK_AON,
+		.enable = ENABLE_VAL(0x4, 6, 0, 12),
+		.mdiv = REG_VAL(0x18, 0, 9),
+	},
+	[BCM_SR_GENPLL2_TS_500_CLK] = {
+		.channel = BCM_SR_GENPLL2_TS_500_CLK,
+		.flags = IPROC_CLK_AON,
+		.enable = ENABLE_VAL(0x4, 7, 1, 13),
+		.mdiv = REG_VAL(0x18, 10, 9),
+	},
+	[BCM_SR_GENPLL2_125_NITRO_CLK] = {
+		.channel = BCM_SR_GENPLL2_125_NITRO_CLK,
+		.flags = IPROC_CLK_AON,
+		.enable = ENABLE_VAL(0x4, 8, 2, 14),
+		.mdiv = REG_VAL(0x18, 20, 9),
+	},
+	[BCM_SR_GENPLL2_CHIMP_CLK] = {
+		.channel = BCM_SR_GENPLL2_CHIMP_CLK,
+		.flags = IPROC_CLK_AON,
+		.enable = ENABLE_VAL(0x4, 9, 3, 15),
+		.mdiv = REG_VAL(0x1c, 0, 9),
+	},
+	[BCM_SR_GENPLL2_NIC_FLASH_CLK] = {
+		.channel = BCM_SR_GENPLL2_NIC_FLASH_CLK,
+		.flags = IPROC_CLK_AON,
+		.enable = ENABLE_VAL(0x4, 10, 4, 16),
+		.mdiv = REG_VAL(0x1c, 10, 9),
+	},
+	[BCM_SR_GENPLL2_FS4_CLK] = {
+		.channel = BCM_SR_GENPLL2_FS4_CLK,
+		.enable = ENABLE_VAL(0x4, 11, 5, 17),
+		.mdiv = REG_VAL(0x1c, 20, 9),
+	},
+};
+
+static int sr_genpll2_clk_init(struct platform_device *pdev)
+{
+	iproc_pll_clk_setup(pdev->dev.of_node,
+			    &sr_genpll2, NULL, 0, sr_genpll2_clk,
+			    ARRAY_SIZE(sr_genpll2_clk));
+	return 0;
+}
+
 static const struct iproc_pll_ctrl sr_genpll3 = {
 	.flags = IPROC_CLK_AON | IPROC_CLK_PLL_HAS_NDIV_FRAC |
 		IPROC_CLK_PLL_NEEDS_SW_CFG,
@@ -157,6 +216,30 @@ static const struct iproc_clk_ctrl sr_genpll4_clk[] = {
 		.enable = ENABLE_VAL(0x4, 6, 0, 12),
 		.mdiv = REG_VAL(0x18, 0, 9),
 	},
+	[BCM_SR_GENPLL4_TPIU_PLL_CLK] = {
+		.channel = BCM_SR_GENPLL4_TPIU_PLL_CLK,
+		.flags = IPROC_CLK_AON,
+		.enable = ENABLE_VAL(0x4, 7, 1, 13),
+		.mdiv = REG_VAL(0x18, 10, 9),
+	},
+	[BCM_SR_GENPLL4_NOC_CLK] = {
+		.channel = BCM_SR_GENPLL4_NOC_CLK,
+		.flags = IPROC_CLK_AON,
+		.enable = ENABLE_VAL(0x4, 8, 2, 14),
+		.mdiv = REG_VAL(0x18, 20, 9),
+	},
+	[BCM_SR_GENPLL4_CHCLK_FS4_CLK] = {
+		.channel = BCM_SR_GENPLL4_CHCLK_FS4_CLK,
+		.flags = IPROC_CLK_AON,
+		.enable = ENABLE_VAL(0x4, 9, 3, 15),
+		.mdiv = REG_VAL(0x1c, 0, 9),
+	},
+	[BCM_SR_GENPLL4_BRIDGE_FSCPU_CLK] = {
+		.channel = BCM_SR_GENPLL4_BRIDGE_FSCPU_CLK,
+		.flags = IPROC_CLK_AON,
+		.enable = ENABLE_VAL(0x4, 10, 4, 16),
+		.mdiv = REG_VAL(0x1c, 10, 9),
+	},
 };
 
 static int sr_genpll4_clk_init(struct platform_device *pdev)
@@ -181,18 +264,21 @@ static const struct iproc_pll_ctrl sr_genpll5 = {
 };
 
 static const struct iproc_clk_ctrl sr_genpll5_clk[] = {
-	[BCM_SR_GENPLL5_FS_CLK] = {
-		.channel = BCM_SR_GENPLL5_FS_CLK,
-		.flags = IPROC_CLK_AON,
+	[BCM_SR_GENPLL5_FS4_HF_CLK] = {
+		.channel = BCM_SR_GENPLL5_FS4_HF_CLK,
 		.enable = ENABLE_VAL(0x4, 6, 0, 12),
 		.mdiv = REG_VAL(0x18, 0, 9),
 	},
-	[BCM_SR_GENPLL5_SPU_CLK] = {
-		.channel = BCM_SR_GENPLL5_SPU_CLK,
-		.flags = IPROC_CLK_AON,
-		.enable = ENABLE_VAL(0x4, 6, 0, 12),
+	[BCM_SR_GENPLL5_CRYPTO_AE_CLK] = {
+		.channel = BCM_SR_GENPLL5_CRYPTO_AE_CLK,
+		.enable = ENABLE_VAL(0x4, 7, 1, 12),
 		.mdiv = REG_VAL(0x18, 10, 9),
 	},
+	[BCM_SR_GENPLL5_RAID_AE_CLK] = {
+		.channel = BCM_SR_GENPLL5_RAID_AE_CLK,
+		.enable = ENABLE_VAL(0x4, 8, 2, 14),
+		.mdiv = REG_VAL(0x18, 20, 9),
+	},
 };
 
 static int sr_genpll5_clk_init(struct platform_device *pdev)
@@ -214,24 +300,30 @@ static const struct iproc_pll_ctrl sr_lcpll0 = {
 };
 
 static const struct iproc_clk_ctrl sr_lcpll0_clk[] = {
-	[BCM_SR_LCPLL0_SATA_REF_CLK] = {
-		.channel = BCM_SR_LCPLL0_SATA_REF_CLK,
+	[BCM_SR_LCPLL0_SATA_REFP_CLK] = {
+		.channel = BCM_SR_LCPLL0_SATA_REFP_CLK,
 		.flags = IPROC_CLK_AON,
 		.enable = ENABLE_VAL(0x0, 7, 1, 13),
 		.mdiv = REG_VAL(0x14, 0, 9),
 	},
-	[BCM_SR_LCPLL0_USB_REF_CLK] = {
-		.channel = BCM_SR_LCPLL0_USB_REF_CLK,
+	[BCM_SR_LCPLL0_SATA_REFN_CLK] = {
+		.channel = BCM_SR_LCPLL0_SATA_REFN_CLK,
 		.flags = IPROC_CLK_AON,
 		.enable = ENABLE_VAL(0x0, 8, 2, 14),
 		.mdiv = REG_VAL(0x14, 10, 9),
 	},
-	[BCM_SR_LCPLL0_SATA_REFPN_CLK] = {
-		.channel = BCM_SR_LCPLL0_SATA_REFPN_CLK,
+	[BCM_SR_LCPLL0_SATA_350_CLK] = {
+		.channel = BCM_SR_LCPLL0_SATA_350_CLK,
 		.flags = IPROC_CLK_AON,
 		.enable = ENABLE_VAL(0x0, 9, 3, 15),
 		.mdiv = REG_VAL(0x14, 20, 9),
 	},
+	[BCM_SR_LCPLL0_SATA_500_CLK] = {
+		.channel = BCM_SR_LCPLL0_SATA_500_CLK,
+		.flags = IPROC_CLK_AON,
+		.enable = ENABLE_VAL(0x0, 10, 4, 16),
+		.mdiv = REG_VAL(0x18, 0, 9),
+	},
 };
 
 static int sr_lcpll0_clk_init(struct platform_device *pdev)
@@ -259,6 +351,18 @@ static const struct iproc_clk_ctrl sr_lcpll1_clk[] = {
 		.enable = ENABLE_VAL(0x0, 7, 1, 13),
 		.mdiv = REG_VAL(0x14, 0, 9),
 	},
+	[BCM_SR_LCPLL1_USB_REF_CLK] = {
+		.channel = BCM_SR_LCPLL1_USB_REF_CLK,
+		.flags = IPROC_CLK_AON,
+		.enable = ENABLE_VAL(0x0, 8, 2, 14),
+		.mdiv = REG_VAL(0x14, 10, 9),
+	},
+	[BCM_SR_LCPLL1_CRMU_TS_CLK] = {
+		.channel = BCM_SR_LCPLL1_CRMU_TS_CLK,
+		.flags = IPROC_CLK_AON,
+		.enable = ENABLE_VAL(0x0, 9, 3, 15),
+		.mdiv = REG_VAL(0x14, 20, 9),
+	},
 };
 
 static int sr_lcpll1_clk_init(struct platform_device *pdev)
@@ -298,6 +402,7 @@ static int sr_lcpll_pcie_clk_init(struct platform_device *pdev)
 
 static const struct of_device_id sr_clk_dt_ids[] = {
 	{ .compatible = "brcm,sr-genpll0", .data = sr_genpll0_clk_init },
+	{ .compatible = "brcm,sr-genpll2", .data = sr_genpll2_clk_init },
 	{ .compatible = "brcm,sr-genpll4", .data = sr_genpll4_clk_init },
 	{ .compatible = "brcm,sr-genpll5", .data = sr_genpll5_clk_init },
 	{ .compatible = "brcm,sr-lcpll0", .data = sr_lcpll0_clk_init },