Merge tag 'qcom-drivers-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/drivers

Qualcomm driver updates for v5.19

This converts a wide range of Qualcomm-related DeviceTree bindings to
YAML, in order to improve our ability to validate the DeviceTree source.

The RPMh power-domain driver gains support for the modem platform SDX65,
the compute platform SC8280XP and the automotive platform SA8540p. While
LLCC gains support for SC8180X and SC8280XP and gains a
MODULE_DEVICE_TABLE() to make it functional as a module.

It adds a driver for configuring the SSC bus, providing Linux access to
the hardware blocks in the sensor subsystem.

The socinfo driver gets confusion related to MSM8974 Pro sorted out and
adds new ids for SM8540 and SC7280.

The SCM driver gains support for MSM8974.

Add missing of_node_put() in smp2p and smsm drivers.
Stop using iterator after list_for_each_entry() and define static
definitions as such, in the PDR driver.

* tag 'qcom-drivers-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (33 commits)
  soc: qcom: pdr: use static for servreg_* variables
  soc: qcom: llcc: Add sc8180x and sc8280xp configurations
  dt-bindings: arm: msm: Add sc8180x and sc8280xp LLCC compatibles
  soc: qcom: rpmhpd: add sc8280xp & sa8540p rpmh power-domains
  soc: qcom: rpmhpd: Don't warn about sparse rpmhpd arrays
  dt-bindings: power: rpmpd: Add sc8280xp RPMh power-domains
  spi: dt-bindings: qcom,spi-geni-qcom: convert to dtschema
  soc: qcom: socinfo: Sort out 8974PRO names
  dt-bindings: soc: qcom,smp2p: convert to dtschema
  dt-bindings: qcom: geni-se: Update UART schema reference
  dt-bindings: qcom: geni-se: Update I2C schema reference
  dt-bindings: soc: qcom,rpmh-rsc: convert to dtschema
  bus: add driver for initializing the SSC bus on (some) qcom SoCs
  dt-bindings: bus: add device tree bindings for qcom,ssc-block-bus
  dt-bindings: qcom: qcom,geni-se: refer to dtschema for SPI
  dt-bindings: soc: qcom,smd: convert to dtschema
  firmware: qcom_scm: Add compatible for MSM8976 SoC
  dt-bindings: firmware: qcom-scm: Document msm8976 bindings
  soc: qcom: smem: validate fields of shared structures
  soc: qcom: smem: map only partitions used by local HOST
  ...

Link: https://lore.kernel.org/r/20220509181839.316655-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

3 files changed, 401 insertions, 0 deletions

diff --git a/drivers/bus/Kconfig b/drivers/bus/Kconfig
index 3c68e174a113..7bfe998f3514 100644
--- a/drivers/bus/Kconfig
+++ b/drivers/bus/Kconfig
@@ -152,6 +152,17 @@ config QCOM_EBI2
 	  Interface 2, which can be used to connect things like NAND Flash,
 	  SRAM, ethernet adapters, FPGAs and LCD displays.
 
+config QCOM_SSC_BLOCK_BUS
+	bool "Qualcomm SSC Block Bus Init Driver"
+	  depends on ARCH_QCOM
+	  help
+	  Say y here to enable support for initializing the bus that connects
+	  the SSC block's internal bus to the cNoC (configurantion NoC) on
+	  (some) qcom SoCs.
+	  The SSC (Snapdragon Sensor Core) block contains a gpio controller,
+	  i2c/spi/uart controllers, a hexagon core, and a clock controller
+	  which provides clocks for the above.
+
 config SUN50I_DE2_BUS
 	bool "Allwinner A64 DE2 Bus Driver"
 	  default ARM64
diff --git a/drivers/bus/Makefile b/drivers/bus/Makefile
index 16da51130d1a..d90eed189a65 100644
--- a/drivers/bus/Makefile
+++ b/drivers/bus/Makefile
@@ -25,6 +25,7 @@ obj-$(CONFIG_OMAP_INTERCONNECT)	+= omap_l3_smx.o omap_l3_noc.o
 
 obj-$(CONFIG_OMAP_OCP2SCP)	+= omap-ocp2scp.o
 obj-$(CONFIG_QCOM_EBI2)		+= qcom-ebi2.o
+obj-$(CONFIG_QCOM_SSC_BLOCK_BUS)	+= qcom-ssc-block-bus.o
 obj-$(CONFIG_SUN50I_DE2_BUS)	+= sun50i-de2.o
 obj-$(CONFIG_SUNXI_RSB)		+= sunxi-rsb.o
 obj-$(CONFIG_OF)		+= simple-pm-bus.o
diff --git a/drivers/bus/qcom-ssc-block-bus.c b/drivers/bus/qcom-ssc-block-bus.c
new file mode 100644
index 000000000000..eedeb29a5ff3
--- /dev/null
+++ b/drivers/bus/qcom-ssc-block-bus.c
@@ -0,0 +1,389 @@
+// SPDX-License-Identifier: GPL-2.0-only
+// Copyright (c) 2021, Michael Srba
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/pm_clock.h>
+#include <linux/pm_domain.h>
+#include <linux/pm_runtime.h>
+#include <linux/regmap.h>
+#include <linux/reset.h>
+
+/* AXI Halt Register Offsets */
+#define AXI_HALTREQ_REG			0x0
+#define AXI_HALTACK_REG			0x4
+#define AXI_IDLE_REG			0x8
+
+#define SSCAON_CONFIG0_CLAMP_EN_OVRD		BIT(4)
+#define SSCAON_CONFIG0_CLAMP_EN_OVRD_VAL	BIT(5)
+
+static const char *const qcom_ssc_block_pd_names[] = {
+	"ssc_cx",
+	"ssc_mx"
+};
+
+struct qcom_ssc_block_bus_data {
+	const char *const *pd_names;
+	struct device *pds[ARRAY_SIZE(qcom_ssc_block_pd_names)];
+	char __iomem *reg_mpm_sscaon_config0;
+	char __iomem *reg_mpm_sscaon_config1;
+	struct regmap *halt_map;
+	struct clk *xo_clk;
+	struct clk *aggre2_clk;
+	struct clk *gcc_im_sleep_clk;
+	struct clk *aggre2_north_clk;
+	struct clk *ssc_xo_clk;
+	struct clk *ssc_ahbs_clk;
+	struct reset_control *ssc_bcr;
+	struct reset_control *ssc_reset;
+	u32 ssc_axi_halt;
+	int num_pds;
+};
+
+static void reg32_set_bits(char __iomem *reg, u32 value)
+{
+	u32 tmp = ioread32(reg);
+
+	iowrite32(tmp | value, reg);
+}
+
+static void reg32_clear_bits(char __iomem *reg, u32 value)
+{
+	u32 tmp = ioread32(reg);
+
+	iowrite32(tmp & (~value), reg);
+}
+
+static int qcom_ssc_block_bus_init(struct device *dev)
+{
+	int ret;
+
+	struct qcom_ssc_block_bus_data *data = dev_get_drvdata(dev);
+
+	ret = clk_prepare_enable(data->xo_clk);
+	if (ret) {
+		dev_err(dev, "error enabling xo_clk: %d\n", ret);
+		goto err_xo_clk;
+	}
+
+	ret = clk_prepare_enable(data->aggre2_clk);
+	if (ret) {
+		dev_err(dev, "error enabling aggre2_clk: %d\n", ret);
+		goto err_aggre2_clk;
+	}
+
+	ret = clk_prepare_enable(data->gcc_im_sleep_clk);
+	if (ret) {
+		dev_err(dev, "error enabling gcc_im_sleep_clk: %d\n", ret);
+		goto err_gcc_im_sleep_clk;
+	}
+
+	/*
+	 * We need to intervene here because the HW logic driving these signals cannot handle
+	 * initialization after power collapse by itself.
+	 */
+	reg32_clear_bits(data->reg_mpm_sscaon_config0,
+			 SSCAON_CONFIG0_CLAMP_EN_OVRD | SSCAON_CONFIG0_CLAMP_EN_OVRD_VAL);
+	/* override few_ack/rest_ack */
+	reg32_clear_bits(data->reg_mpm_sscaon_config1, BIT(31));
+
+	ret = clk_prepare_enable(data->aggre2_north_clk);
+	if (ret) {
+		dev_err(dev, "error enabling aggre2_north_clk: %d\n", ret);
+		goto err_aggre2_north_clk;
+	}
+
+	ret = reset_control_deassert(data->ssc_reset);
+	if (ret) {
+		dev_err(dev, "error deasserting ssc_reset: %d\n", ret);
+		goto err_ssc_reset;
+	}
+
+	ret = reset_control_deassert(data->ssc_bcr);
+	if (ret) {
+		dev_err(dev, "error deasserting ssc_bcr: %d\n", ret);
+		goto err_ssc_bcr;
+	}
+
+	regmap_write(data->halt_map, data->ssc_axi_halt + AXI_HALTREQ_REG, 0);
+
+	ret = clk_prepare_enable(data->ssc_xo_clk);
+	if (ret) {
+		dev_err(dev, "error deasserting ssc_xo_clk: %d\n", ret);
+		goto err_ssc_xo_clk;
+	}
+
+	ret = clk_prepare_enable(data->ssc_ahbs_clk);
+	if (ret) {
+		dev_err(dev, "error deasserting ssc_ahbs_clk: %d\n", ret);
+		goto err_ssc_ahbs_clk;
+	}
+
+	return 0;
+
+err_ssc_ahbs_clk:
+	clk_disable(data->ssc_xo_clk);
+
+err_ssc_xo_clk:
+	regmap_write(data->halt_map, data->ssc_axi_halt + AXI_HALTREQ_REG, 1);
+
+	reset_control_assert(data->ssc_bcr);
+
+err_ssc_bcr:
+	reset_control_assert(data->ssc_reset);
+
+err_ssc_reset:
+	clk_disable(data->aggre2_north_clk);
+
+err_aggre2_north_clk:
+	reg32_set_bits(data->reg_mpm_sscaon_config0, BIT(4) | BIT(5));
+	reg32_set_bits(data->reg_mpm_sscaon_config1, BIT(31));
+
+	clk_disable(data->gcc_im_sleep_clk);
+
+err_gcc_im_sleep_clk:
+	clk_disable(data->aggre2_clk);
+
+err_aggre2_clk:
+	clk_disable(data->xo_clk);
+
+err_xo_clk:
+	return ret;
+}
+
+static void qcom_ssc_block_bus_deinit(struct device *dev)
+{
+	int ret;
+
+	struct qcom_ssc_block_bus_data *data = dev_get_drvdata(dev);
+
+	clk_disable(data->ssc_xo_clk);
+	clk_disable(data->ssc_ahbs_clk);
+
+	ret = reset_control_assert(data->ssc_bcr);
+	if (ret)
+		dev_err(dev, "error asserting ssc_bcr: %d\n", ret);
+
+	regmap_write(data->halt_map, data->ssc_axi_halt + AXI_HALTREQ_REG, 1);
+
+	reg32_set_bits(data->reg_mpm_sscaon_config1, BIT(31));
+	reg32_set_bits(data->reg_mpm_sscaon_config0, BIT(4) | BIT(5));
+
+	ret = reset_control_assert(data->ssc_reset);
+	if (ret)
+		dev_err(dev, "error asserting ssc_reset: %d\n", ret);
+
+	clk_disable(data->gcc_im_sleep_clk);
+
+	clk_disable(data->aggre2_north_clk);
+
+	clk_disable(data->aggre2_clk);
+	clk_disable(data->xo_clk);
+}
+
+static int qcom_ssc_block_bus_pds_attach(struct device *dev, struct device **pds,
+					 const char *const *pd_names, size_t num_pds)
+{
+	int ret;
+	int i;
+
+	for (i = 0; i < num_pds; i++) {
+		pds[i] = dev_pm_domain_attach_by_name(dev, pd_names[i]);
+		if (IS_ERR_OR_NULL(pds[i])) {
+			ret = PTR_ERR(pds[i]) ? : -ENODATA;
+			goto unroll_attach;
+		}
+	}
+
+	return num_pds;
+
+unroll_attach:
+	for (i--; i >= 0; i--)
+		dev_pm_domain_detach(pds[i], false);
+
+	return ret;
+};
+
+static void qcom_ssc_block_bus_pds_detach(struct device *dev, struct device **pds, size_t num_pds)
+{
+	int i;
+
+	for (i = 0; i < num_pds; i++)
+		dev_pm_domain_detach(pds[i], false);
+}
+
+static int qcom_ssc_block_bus_pds_enable(struct device **pds, size_t num_pds)
+{
+	int ret;
+	int i;
+
+	for (i = 0; i < num_pds; i++) {
+		dev_pm_genpd_set_performance_state(pds[i], INT_MAX);
+		ret = pm_runtime_get_sync(pds[i]);
+		if (ret < 0)
+			goto unroll_pd_votes;
+	}
+
+	return 0;
+
+unroll_pd_votes:
+	for (i--; i >= 0; i--) {
+		dev_pm_genpd_set_performance_state(pds[i], 0);
+		pm_runtime_put(pds[i]);
+	}
+
+	return ret;
+};
+
+static void qcom_ssc_block_bus_pds_disable(struct device **pds, size_t num_pds)
+{
+	int i;
+
+	for (i = 0; i < num_pds; i++) {
+		dev_pm_genpd_set_performance_state(pds[i], 0);
+		pm_runtime_put(pds[i]);
+	}
+}
+
+static int qcom_ssc_block_bus_probe(struct platform_device *pdev)
+{
+	struct qcom_ssc_block_bus_data *data;
+	struct device_node *np = pdev->dev.of_node;
+	struct of_phandle_args halt_args;
+	struct resource *res;
+	int ret;
+
+	data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, data);
+
+	data->pd_names = qcom_ssc_block_pd_names;
+	data->num_pds = ARRAY_SIZE(qcom_ssc_block_pd_names);
+
+	/* power domains */
+	ret = qcom_ssc_block_bus_pds_attach(&pdev->dev, data->pds, data->pd_names, data->num_pds);
+	if (ret < 0)
+		return dev_err_probe(&pdev->dev, ret, "error when attaching power domains\n");
+
+	ret = qcom_ssc_block_bus_pds_enable(data->pds, data->num_pds);
+	if (ret < 0)
+		return dev_err_probe(&pdev->dev, ret, "error when enabling power domains\n");
+
+	/* low level overrides for when the HW logic doesn't "just work" */
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mpm_sscaon_config0");
+	data->reg_mpm_sscaon_config0 = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(data->reg_mpm_sscaon_config0))
+		return dev_err_probe(&pdev->dev, PTR_ERR(data->reg_mpm_sscaon_config0),
+				     "Failed to ioremap mpm_sscaon_config0\n");
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mpm_sscaon_config1");
+	data->reg_mpm_sscaon_config1 = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(data->reg_mpm_sscaon_config1))
+		return dev_err_probe(&pdev->dev, PTR_ERR(data->reg_mpm_sscaon_config1),
+				     "Failed to ioremap mpm_sscaon_config1\n");
+
+	/* resets */
+	data->ssc_bcr = devm_reset_control_get_exclusive(&pdev->dev, "ssc_bcr");
+	if (IS_ERR(data->ssc_bcr))
+		return dev_err_probe(&pdev->dev, PTR_ERR(data->ssc_bcr),
+				     "Failed to acquire reset: scc_bcr\n");
+
+	data->ssc_reset = devm_reset_control_get_exclusive(&pdev->dev, "ssc_reset");
+	if (IS_ERR(data->ssc_reset))
+		return dev_err_probe(&pdev->dev, PTR_ERR(data->ssc_reset),
+				     "Failed to acquire reset: ssc_reset:\n");
+
+	/* clocks */
+	data->xo_clk = devm_clk_get(&pdev->dev, "xo");
+	if (IS_ERR(data->xo_clk))
+		return dev_err_probe(&pdev->dev, PTR_ERR(data->xo_clk),
+				     "Failed to get clock: xo\n");
+
+	data->aggre2_clk = devm_clk_get(&pdev->dev, "aggre2");
+	if (IS_ERR(data->aggre2_clk))
+		return dev_err_probe(&pdev->dev, PTR_ERR(data->aggre2_clk),
+				     "Failed to get clock: aggre2\n");
+
+	data->gcc_im_sleep_clk = devm_clk_get(&pdev->dev, "gcc_im_sleep");
+	if (IS_ERR(data->gcc_im_sleep_clk))
+		return dev_err_probe(&pdev->dev, PTR_ERR(data->gcc_im_sleep_clk),
+				     "Failed to get clock: gcc_im_sleep\n");
+
+	data->aggre2_north_clk = devm_clk_get(&pdev->dev, "aggre2_north");
+	if (IS_ERR(data->aggre2_north_clk))
+		return dev_err_probe(&pdev->dev, PTR_ERR(data->aggre2_north_clk),
+				     "Failed to get clock: aggre2_north\n");
+
+	data->ssc_xo_clk = devm_clk_get(&pdev->dev, "ssc_xo");
+	if (IS_ERR(data->ssc_xo_clk))
+		return dev_err_probe(&pdev->dev, PTR_ERR(data->ssc_xo_clk),
+				     "Failed to get clock: ssc_xo\n");
+
+	data->ssc_ahbs_clk = devm_clk_get(&pdev->dev, "ssc_ahbs");
+	if (IS_ERR(data->ssc_ahbs_clk))
+		return dev_err_probe(&pdev->dev, PTR_ERR(data->ssc_ahbs_clk),
+				     "Failed to get clock: ssc_ahbs\n");
+
+	ret = of_parse_phandle_with_fixed_args(pdev->dev.of_node, "qcom,halt-regs", 1, 0,
+					       &halt_args);
+	if (ret < 0)
+		return dev_err_probe(&pdev->dev, ret, "Failed to parse qcom,halt-regs\n");
+
+	data->halt_map = syscon_node_to_regmap(halt_args.np);
+	of_node_put(halt_args.np);
+	if (IS_ERR(data->halt_map))
+		return PTR_ERR(data->halt_map);
+
+	data->ssc_axi_halt = halt_args.args[0];
+
+	qcom_ssc_block_bus_init(&pdev->dev);
+
+	of_platform_populate(np, NULL, NULL, &pdev->dev);
+
+	return 0;
+}
+
+static int qcom_ssc_block_bus_remove(struct platform_device *pdev)
+{
+	struct qcom_ssc_block_bus_data *data = platform_get_drvdata(pdev);
+
+	qcom_ssc_block_bus_deinit(&pdev->dev);
+
+	iounmap(data->reg_mpm_sscaon_config0);
+	iounmap(data->reg_mpm_sscaon_config1);
+
+	qcom_ssc_block_bus_pds_disable(data->pds, data->num_pds);
+	qcom_ssc_block_bus_pds_detach(&pdev->dev, data->pds, data->num_pds);
+	pm_runtime_disable(&pdev->dev);
+	pm_clk_destroy(&pdev->dev);
+
+	return 0;
+}
+
+static const struct of_device_id qcom_ssc_block_bus_of_match[] = {
+	{ .compatible = "qcom,ssc-block-bus", },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, qcom_ssc_block_bus_of_match);
+
+static struct platform_driver qcom_ssc_block_bus_driver = {
+	.probe = qcom_ssc_block_bus_probe,
+	.remove = qcom_ssc_block_bus_remove,
+	.driver = {
+		.name = "qcom-ssc-block-bus",
+		.of_match_table = qcom_ssc_block_bus_of_match,
+	},
+};
+
+module_platform_driver(qcom_ssc_block_bus_driver);
+
+MODULE_DESCRIPTION("A driver for handling the init sequence needed for accessing the SSC block on (some) qcom SoCs over AHB");
+MODULE_AUTHOR("Michael Srba <Michael.Srba@seznam.cz>");
+MODULE_LICENSE("GPL v2");