net: atm: remove support for Fujitsu FireStream ATM devices

This driver received nothing but automated fixes (mostly spelling
and compiler warnings) since git era begun. Since it's using
virt_to_bus it's unlikely to be used on any modern platform.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

4 files changed, 0 insertions, 2570 deletions

diff --git a/drivers/atm/Kconfig b/drivers/atm/Kconfig
index 7be08e24955c..360c98ad29eb 100644
--- a/drivers/atm/Kconfig
+++ b/drivers/atm/Kconfig
@@ -146,16 +146,6 @@ config ATM_ENI_BURST_RX_2W
 	  try this if you have disabled 4W and 8W bursts. Enabling 2W if 4W or
 	  8W are also set may or may not improve throughput.
 
-config ATM_FIRESTREAM
-	tristate "Fujitsu FireStream (FS50/FS155) "
-	depends on PCI && VIRT_TO_BUS
-	help
-	  Driver for the Fujitsu FireStream 155 (MB86697) and
-	  FireStream 50 (MB86695) ATM PCI chips.
-
-	  To compile this driver as a module, choose M here: the module will
-	  be called firestream.
-
 config ATM_ZATM
 	tristate "ZeitNet ZN1221/ZN1225"
 	depends on PCI && VIRT_TO_BUS
diff --git a/drivers/atm/Makefile b/drivers/atm/Makefile
index 99ecbc280643..7d38fdaddd09 100644
--- a/drivers/atm/Makefile
+++ b/drivers/atm/Makefile
@@ -26,7 +26,6 @@ endif
 
 obj-$(CONFIG_ATM_DUMMY)		+= adummy.o
 obj-$(CONFIG_ATM_TCP)		+= atmtcp.o
-obj-$(CONFIG_ATM_FIRESTREAM)	+= firestream.o
 obj-$(CONFIG_ATM_LANAI)		+= lanai.o
 
 obj-$(CONFIG_ATM_HE)		+= he.o
diff --git a/drivers/atm/firestream.c b/drivers/atm/firestream.c
deleted file mode 100644
index 4f67404fe64c..000000000000
--- a/drivers/atm/firestream.c
+++ /dev/null
@@ -1,2057 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-
-/* drivers/atm/firestream.c - FireStream 155 (MB86697) and
- *                            FireStream  50 (MB86695) device driver 
- */
- 
-/* Written & (C) 2000 by R.E.Wolff@BitWizard.nl 
- * Copied snippets from zatm.c by Werner Almesberger, EPFL LRC/ICA 
- * and ambassador.c Copyright (C) 1995-1999  Madge Networks Ltd 
- */
-
-/*
-*/
-
-
-#include <linux/module.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/pci.h>
-#include <linux/poison.h>
-#include <linux/errno.h>
-#include <linux/atm.h>
-#include <linux/atmdev.h>
-#include <linux/sonet.h>
-#include <linux/skbuff.h>
-#include <linux/netdevice.h>
-#include <linux/delay.h>
-#include <linux/ioport.h> /* for request_region */
-#include <linux/uio.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/capability.h>
-#include <linux/bitops.h>
-#include <linux/slab.h>
-#include <asm/byteorder.h>
-#include <asm/string.h>
-#include <asm/io.h>
-#include <linux/atomic.h>
-#include <linux/uaccess.h>
-#include <linux/wait.h>
-
-#include "firestream.h"
-
-static int loopback = 0;
-static int num=0x5a;
-
-/* According to measurements (but they look suspicious to me!) done in
- * '97, 37% of the packets are one cell in size. So it pays to have
- * buffers allocated at that size. A large jump in percentage of
- * packets occurs at packets around 536 bytes in length. So it also
- * pays to have those pre-allocated. Unfortunately, we can't fully
- * take advantage of this as the majority of the packets is likely to
- * be TCP/IP (As where obviously the measurement comes from) There the
- * link would be opened with say a 1500 byte MTU, and we can't handle
- * smaller buffers more efficiently than the larger ones. -- REW
- */
-
-/* Due to the way Linux memory management works, specifying "576" as
- * an allocation size here isn't going to help. They are allocated
- * from 1024-byte regions anyway. With the size of the sk_buffs (quite
- * large), it doesn't pay to allocate the smallest size (64) -- REW */
-
-/* This is all guesswork. Hard numbers to back this up or disprove this, 
- * are appreciated. -- REW */
-
-/* The last entry should be about 64k. However, the "buffer size" is
- * passed to the chip in a 16 bit field. I don't know how "65536"
- * would be interpreted. -- REW */
-
-#define NP FS_NR_FREE_POOLS
-static int rx_buf_sizes[NP]  = {128,  256,  512, 1024, 2048, 4096, 16384, 65520};
-/* log2:                 7     8     9    10    11    12    14     16 */
-
-#if 0
-static int rx_pool_sizes[NP] = {1024, 1024, 512, 256,  128,  64,   32,    32};
-#else
-/* debug */
-static int rx_pool_sizes[NP] = {128,  128,  128, 64,   64,   64,   32,    32};
-#endif
-/* log2:                 10    10    9    8     7     6     5      5  */
-/* sumlog2:              17    18    18   18    18    18    19     21 */
-/* mem allocated:        128k  256k  256k 256k  256k  256k  512k   2M */
-/* tot mem: almost 4M */
-
-/* NP is shorter, so that it fits on a single line. */
-#undef NP
-
-
-/* Small hardware gotcha:
-
-   The FS50 CAM (VP/VC match registers) always take the lowest channel
-   number that matches. This is not a problem.
-
-   However, they also ignore whether the channel is enabled or
-   not. This means that if you allocate channel 0 to 1.2 and then
-   channel 1 to 0.0, then disabeling channel 0 and writing 0 to the
-   match channel for channel 0 will "steal" the traffic from channel
-   1, even if you correctly disable channel 0.
-
-   Workaround: 
-
-   - When disabling channels, write an invalid VP/VC value to the
-   match register. (We use 0xffffffff, which in the worst case 
-   matches VP/VC = <maxVP>/<maxVC>, but I expect it not to match
-   anything as some "when not in use, program to 0" bits are now
-   programmed to 1...)
-
-   - Don't initialize the match registers to 0, as 0.0 is a valid
-   channel.
-*/
-
-
-/* Optimization hints and tips.
-
-   The FireStream chips are very capable of reducing the amount of
-   "interrupt-traffic" for the CPU. This driver requests an interrupt on EVERY
-   action. You could try to minimize this a bit. 
-
-   Besides that, the userspace->kernel copy and the PCI bus are the
-   performance limiting issues for this driver.
-
-   You could queue up a bunch of outgoing packets without telling the
-   FireStream. I'm not sure that's going to win you much though. The
-   Linux layer won't tell us in advance when it's not going to give us
-   any more packets in a while. So this is tricky to implement right without
-   introducing extra delays. 
-  
-   -- REW
- */
-
-
-
-
-/* The strings that define what the RX queue entry is all about. */
-/* Fujitsu: Please tell me which ones can have a pointer to a 
-   freepool descriptor! */
-static char *res_strings[] = {
-	"RX OK: streaming not EOP", 
-	"RX OK: streaming EOP", 
-	"RX OK: Single buffer packet", 
-	"RX OK: packet mode", 
-	"RX OK: F4 OAM (end to end)", 
-	"RX OK: F4 OAM (Segment)", 
-	"RX OK: F5 OAM (end to end)", 
-	"RX OK: F5 OAM (Segment)", 
-	"RX OK: RM cell", 
-	"RX OK: TRANSP cell", 
-	"RX OK: TRANSPC cell", 
-	"Unmatched cell", 
-	"reserved 12", 
-	"reserved 13", 
-	"reserved 14", 
-	"Unrecognized cell", 
-	"reserved 16", 
-	"reassembly abort: AAL5 abort", 
-	"packet purged", 
-	"packet ageing timeout", 
-	"channel ageing timeout", 
-	"calculated length error", 
-	"programmed length limit error", 
-	"aal5 crc32 error", 
-	"oam transp or transpc crc10 error", 
-	"reserved 25", 
-	"reserved 26", 
-	"reserved 27", 
-	"reserved 28", 
-	"reserved 29", 
-	"reserved 30", /* FIXME: The strings between 30-40 might be wrong. */
-	"reassembly abort: no buffers", 
-	"receive buffer overflow", 
-	"change in GFC", 
-	"receive buffer full", 
-	"low priority discard - no receive descriptor", 
-	"low priority discard - missing end of packet", 
-	"reserved 37",
-	"reserved 38",
-	"reserved 39",
-	"reserved 40",
-	"reserved 41", 
-	"reserved 42", 
-	"reserved 43", 
-	"reserved 44", 
-	"reserved 45", 
-	"reserved 46", 
-	"reserved 47", 
-	"reserved 48", 
-	"reserved 49", 
-	"reserved 50", 
-	"reserved 51", 
-	"reserved 52", 
-	"reserved 53", 
-	"reserved 54", 
-	"reserved 55", 
-	"reserved 56", 
-	"reserved 57", 
-	"reserved 58", 
-	"reserved 59", 
-	"reserved 60", 
-	"reserved 61", 
-	"reserved 62", 
-	"reserved 63", 
-};  
-
-static char *irq_bitname[] = {
-	"LPCO",
-	"DPCO",
-	"RBRQ0_W",
-	"RBRQ1_W",
-	"RBRQ2_W",
-	"RBRQ3_W",
-	"RBRQ0_NF",
-	"RBRQ1_NF",
-	"RBRQ2_NF",
-	"RBRQ3_NF",
-	"BFP_SC",
-	"INIT",
-	"INIT_ERR",
-	"USCEO",
-	"UPEC0",
-	"VPFCO",
-	"CRCCO",
-	"HECO",
-	"TBRQ_W",
-	"TBRQ_NF",
-	"CTPQ_E",
-	"GFC_C0",
-	"PCI_FTL",
-	"CSQ_W",
-	"CSQ_NF",
-	"EXT_INT",
-	"RXDMA_S"
-};
-
-
-#define PHY_EOF -1
-#define PHY_CLEARALL -2
-
-struct reginit_item {
-	int reg, val;
-};
-
-
-static struct reginit_item PHY_NTC_INIT[] = {
-	{ PHY_CLEARALL, 0x40 }, 
-	{ 0x12,  0x0001 },
-	{ 0x13,  0x7605 },
-	{ 0x1A,  0x0001 },
-	{ 0x1B,  0x0005 },
-	{ 0x38,  0x0003 },
-	{ 0x39,  0x0006 },   /* changed here to make loopback */
-	{ 0x01,  0x5262 },
-	{ 0x15,  0x0213 },
-	{ 0x00,  0x0003 },
-	{ PHY_EOF, 0},    /* -1 signals end of list */
-};
-
-
-/* Safetyfeature: If the card interrupts more than this number of times
-   in a jiffy (1/100th of a second) then we just disable the interrupt and
-   print a message. This prevents the system from hanging. 
-
-   150000 packets per second is close to the limit a PC is going to have
-   anyway. We therefore have to disable this for production. -- REW */
-#undef IRQ_RATE_LIMIT // 100
-
-/* Interrupts work now. Unlike serial cards, ATM cards don't work all
-   that great without interrupts. -- REW */
-#undef FS_POLL_FREQ // 100
-
-/* 
-   This driver can spew a whole lot of debugging output at you. If you
-   need maximum performance, you should disable the DEBUG define. To
-   aid in debugging in the field, I'm leaving the compile-time debug
-   features enabled, and disable them "runtime". That allows me to
-   instruct people with problems to enable debugging without requiring
-   them to recompile... -- REW
-*/
-#define DEBUG
-
-#ifdef DEBUG
-#define fs_dprintk(f, str...) if (fs_debug & f) printk (str)
-#else
-#define fs_dprintk(f, str...) /* nothing */
-#endif
-
-
-static int fs_keystream = 0;
-
-#ifdef DEBUG
-/* I didn't forget to set this to zero before shipping. Hit me with a stick 
-   if you get this with the debug default not set to zero again. -- REW */
-static int fs_debug = 0;
-#else
-#define fs_debug 0
-#endif
-
-#ifdef MODULE
-#ifdef DEBUG 
-module_param(fs_debug, int, 0644);
-#endif
-module_param(loopback, int, 0);
-module_param(num, int, 0);
-module_param(fs_keystream, int, 0);
-/* XXX Add rx_buf_sizes, and rx_pool_sizes As per request Amar. -- REW */
-#endif
-
-
-#define FS_DEBUG_FLOW    0x00000001
-#define FS_DEBUG_OPEN    0x00000002
-#define FS_DEBUG_QUEUE   0x00000004
-#define FS_DEBUG_IRQ     0x00000008
-#define FS_DEBUG_INIT    0x00000010
-#define FS_DEBUG_SEND    0x00000020
-#define FS_DEBUG_PHY     0x00000040
-#define FS_DEBUG_CLEANUP 0x00000080
-#define FS_DEBUG_QOS     0x00000100
-#define FS_DEBUG_TXQ     0x00000200
-#define FS_DEBUG_ALLOC   0x00000400
-#define FS_DEBUG_TXMEM   0x00000800
-#define FS_DEBUG_QSIZE   0x00001000
-
-
-#define func_enter() fs_dprintk(FS_DEBUG_FLOW, "fs: enter %s\n", __func__)
-#define func_exit()  fs_dprintk(FS_DEBUG_FLOW, "fs: exit  %s\n", __func__)
-
-
-static struct fs_dev *fs_boards = NULL;
-
-#ifdef DEBUG
-
-static void my_hd (void *addr, int len)
-{
-	int j, ch;
-	unsigned char *ptr = addr;
-
-	while (len > 0) {
-		printk ("%p ", ptr);
-		for (j=0;j < ((len < 16)?len:16);j++) {
-			printk ("%02x %s", ptr[j], (j==7)?" ":"");
-		}
-		for (  ;j < 16;j++) {
-			printk ("   %s", (j==7)?" ":"");
-		}
-		for (j=0;j < ((len < 16)?len:16);j++) {
-			ch = ptr[j];
-			printk ("%c", (ch < 0x20)?'.':((ch > 0x7f)?'.':ch));
-		}
-		printk ("\n");
-		ptr += 16;
-		len -= 16;
-	}
-}
-#else /* DEBUG */
-static void my_hd (void *addr, int len){}
-#endif /* DEBUG */
-
-/********** free an skb (as per ATM device driver documentation) **********/
-
-/* Hmm. If this is ATM specific, why isn't there an ATM routine for this?
- * I copied it over from the ambassador driver. -- REW */
-
-static inline void fs_kfree_skb (struct sk_buff * skb) 
-{
-	if (ATM_SKB(skb)->vcc->pop)
-		ATM_SKB(skb)->vcc->pop (ATM_SKB(skb)->vcc, skb);
-	else
-		dev_kfree_skb_any (skb);
-}
-
-
-
-
-/* It seems the ATM forum recommends this horribly complicated 16bit
- * floating point format. Turns out the Ambassador uses the exact same
- * encoding. I just copied it over. If Mitch agrees, I'll move it over
- * to the atm_misc file or something like that. (and remove it from 
- * here and the ambassador driver) -- REW
- */
-
-/* The good thing about this format is that it is monotonic. So, 
-   a conversion routine need not be very complicated. To be able to
-   round "nearest" we need to take along a few extra bits. Lets
-   put these after 16 bits, so that we can just return the top 16
-   bits of the 32bit number as the result:
-
-   int mr (unsigned int rate, int r) 
-     {
-     int e = 16+9;
-     static int round[4]={0, 0, 0xffff, 0x8000};
-     if (!rate) return 0;
-     while (rate & 0xfc000000) {
-       rate >>= 1;
-       e++;
-     }
-     while (! (rate & 0xfe000000)) {
-       rate <<= 1;
-       e--;
-     }
-
-// Now the mantissa is in positions bit 16-25. Excepf for the "hidden 1" that's in bit 26.
-     rate &= ~0x02000000;
-// Next add in the exponent
-     rate |= e << (16+9);
-// And perform the rounding:
-     return (rate + round[r]) >> 16;
-   }
-
-   14 lines-of-code. Compare that with the 120 that the Ambassador
-   guys needed. (would be 8 lines shorter if I'd try to really reduce
-   the number of lines:
-
-   int mr (unsigned int rate, int r) 
-   {
-     int e = 16+9;
-     static int round[4]={0, 0, 0xffff, 0x8000};
-     if (!rate) return 0;
-     for (;  rate & 0xfc000000 ;rate >>= 1, e++);
-     for (;!(rate & 0xfe000000);rate <<= 1, e--);
-     return ((rate & ~0x02000000) | (e << (16+9)) + round[r]) >> 16;
-   }
-
-   Exercise for the reader: Remove one more line-of-code, without
-   cheating. (Just joining two lines is cheating). (I know it's
-   possible, don't think you've beat me if you found it... If you
-   manage to lose two lines or more, keep me updated! ;-)
-
-   -- REW */
-
-
-#define ROUND_UP      1
-#define ROUND_DOWN    2
-#define ROUND_NEAREST 3
-/********** make rate (not quite as much fun as Horizon) **********/
-
-static int make_rate(unsigned int rate, int r,
-		      u16 *bits, unsigned int *actual)
-{
-	unsigned char exp = -1; /* hush gcc */
-	unsigned int man = -1;  /* hush gcc */
-  
-	fs_dprintk (FS_DEBUG_QOS, "make_rate %u", rate);
-  
-	/* rates in cells per second, ITU format (nasty 16-bit floating-point)
-	   given 5-bit e and 9-bit m:
-	   rate = EITHER (1+m/2^9)*2^e    OR 0
-	   bits = EITHER 1<<14 | e<<9 | m OR 0
-	   (bit 15 is "reserved", bit 14 "non-zero")
-	   smallest rate is 0 (special representation)
-	   largest rate is (1+511/512)*2^31 = 4290772992 (< 2^32-1)
-	   smallest non-zero rate is (1+0/512)*2^0 = 1 (> 0)
-	   simple algorithm:
-	   find position of top bit, this gives e
-	   remove top bit and shift (rounding if feeling clever) by 9-e
-	*/
-	/* Ambassador ucode bug: please don't set bit 14! so 0 rate not
-	   representable. // This should move into the ambassador driver
-	   when properly merged. -- REW */
-  
-	if (rate > 0xffc00000U) {
-		/* larger than largest representable rate */
-    
-		if (r == ROUND_UP) {
-			return -EINVAL;
-		} else {
-			exp = 31;
-			man = 511;
-		}
-    
-	} else if (rate) {
-		/* representable rate */
-    
-		exp = 31;
-		man = rate;
-    
-		/* invariant: rate = man*2^(exp-31) */
-		while (!(man & (1<<31))) {
-			exp = exp - 1;
-			man = man<<1;
-		}
-    
-		/* man has top bit set
-		   rate = (2^31+(man-2^31))*2^(exp-31)
-		   rate = (1+(man-2^31)/2^31)*2^exp 
-		*/
-		man = man<<1;
-		man &= 0xffffffffU; /* a nop on 32-bit systems */
-		/* rate = (1+man/2^32)*2^exp
-    
-		   exp is in the range 0 to 31, man is in the range 0 to 2^32-1
-		   time to lose significance... we want m in the range 0 to 2^9-1
-		   rounding presents a minor problem... we first decide which way
-		   we are rounding (based on given rounding direction and possibly
-		   the bits of the mantissa that are to be discarded).
-		*/
-
-		switch (r) {
-		case ROUND_DOWN: {
-			/* just truncate */
-			man = man>>(32-9);
-			break;
-		}
-		case ROUND_UP: {
-			/* check all bits that we are discarding */
-			if (man & (~0U>>9)) {
-				man = (man>>(32-9)) + 1;
-				if (man == (1<<9)) {
-					/* no need to check for round up outside of range */
-					man = 0;
-					exp += 1;
-				}
-			} else {
-				man = (man>>(32-9));
-			}
-			break;
-		}
-		case ROUND_NEAREST: {
-			/* check msb that we are discarding */
-			if (man & (1<<(32-9-1))) {
-				man = (man>>(32-9)) + 1;
-				if (man == (1<<9)) {
-					/* no need to check for round up outside of range */
-					man = 0;
-					exp += 1;
-				}
-			} else {
-				man = (man>>(32-9));
-			}
-			break;
-		}
-		}
-    
-	} else {
-		/* zero rate - not representable */
-    
-		if (r == ROUND_DOWN) {
-			return -EINVAL;
-		} else {
-			exp = 0;
-			man = 0;
-		}
-	}
-  
-	fs_dprintk (FS_DEBUG_QOS, "rate: man=%u, exp=%hu", man, exp);
-  
-	if (bits)
-		*bits = /* (1<<14) | */ (exp<<9) | man;
-  
-	if (actual)
-		*actual = (exp >= 9)
-			? (1 << exp) + (man << (exp-9))
-			: (1 << exp) + ((man + (1<<(9-exp-1))) >> (9-exp));
-  
-	return 0;
-}
-
-
-
-
-/* FireStream access routines */
-/* For DEEP-DOWN debugging these can be rigged to intercept accesses to
-   certain registers or to just log all accesses. */
-
-static inline void write_fs (struct fs_dev *dev, int offset, u32 val)
-{
-	writel (val, dev->base + offset);
-}
-
-
-static inline u32  read_fs (struct fs_dev *dev, int offset)
-{
-	return readl (dev->base + offset);
-}
-
-
-
-static inline struct FS_QENTRY *get_qentry (struct fs_dev *dev, struct queue *q)
-{
-	return bus_to_virt (read_fs (dev, Q_WP(q->offset)) & Q_ADDR_MASK);
-}
-
-
-static void submit_qentry (struct fs_dev *dev, struct queue *q, struct FS_QENTRY *qe)
-{
-	u32 wp;
-	struct FS_QENTRY *cqe;
-
-	/* XXX Sanity check: the write pointer can be checked to be 
-	   still the same as the value passed as qe... -- REW */
-	/*  udelay (5); */
-	while ((wp = read_fs (dev, Q_WP (q->offset))) & Q_FULL) {
-		fs_dprintk (FS_DEBUG_TXQ, "Found queue at %x full. Waiting.\n", 
-			    q->offset);
-		schedule ();
-	}
-
-	wp &= ~0xf;
-	cqe = bus_to_virt (wp);
-	if (qe != cqe) {
-		fs_dprintk (FS_DEBUG_TXQ, "q mismatch! %p %p\n", qe, cqe);
-	}
-
-	write_fs (dev, Q_WP(q->offset), Q_INCWRAP);
-
-	{
-		static int c;
-		if (!(c++ % 100))
-			{
-				int rp, wp;
-				rp =  read_fs (dev, Q_RP(q->offset));
-				wp =  read_fs (dev, Q_WP(q->offset));
-				fs_dprintk (FS_DEBUG_TXQ, "q at %d: %x-%x: %x entries.\n", 
-					    q->offset, rp, wp, wp-rp);
-			}
-	}
-}
-
-#ifdef DEBUG_EXTRA
-static struct FS_QENTRY pq[60];
-static int qp;
-
-static struct FS_BPENTRY dq[60];
-static int qd;
-static void *da[60];
-#endif 
-
-static void submit_queue (struct fs_dev *dev, struct queue *q, 
-			  u32 cmd, u32 p1, u32 p2, u32 p3)
-{
-	struct FS_QENTRY *qe;
-
-	qe = get_qentry (dev, q);
-	qe->cmd = cmd;
-	qe->p0 = p1;
-	qe->p1 = p2;
-	qe->p2 = p3;
-	submit_qentry (dev,  q, qe);
-
-#ifdef DEBUG_EXTRA
-	pq[qp].cmd = cmd;
-	pq[qp].p0 = p1;
-	pq[qp].p1 = p2;
-	pq[qp].p2 = p3;
-	qp++;
-	if (qp >= 60) qp = 0;
-#endif
-}
-
-/* Test the "other" way one day... -- REW */
-#if 1
-#define submit_command submit_queue
-#else
-
-static void submit_command (struct fs_dev *dev, struct queue *q, 
-			    u32 cmd, u32 p1, u32 p2, u32 p3)
-{
-	write_fs (dev, CMDR0, cmd);
-	write_fs (dev, CMDR1, p1);
-	write_fs (dev, CMDR2, p2);
-	write_fs (dev, CMDR3, p3);
-}
-#endif
-
-
-
-static void process_return_queue (struct fs_dev *dev, struct queue *q)
-{
-	long rq;
-	struct FS_QENTRY *qe;
-	void *tc;
-  
-	while (!((rq = read_fs (dev, Q_RP(q->offset))) & Q_EMPTY)) {
-		fs_dprintk (FS_DEBUG_QUEUE, "reaping return queue entry at %lx\n", rq); 
-		qe = bus_to_virt (rq);
-    
-		fs_dprintk (FS_DEBUG_QUEUE, "queue entry: %08x %08x %08x %08x. (%d)\n", 
-			    qe->cmd, qe->p0, qe->p1, qe->p2, STATUS_CODE (qe));
-
-		switch (STATUS_CODE (qe)) {
-		case 5:
-			tc = bus_to_virt (qe->p0);
-			fs_dprintk (FS_DEBUG_ALLOC, "Free tc: %p\n", tc);
-			kfree (tc);
-			break;
-		}
-    
-		write_fs (dev, Q_RP(q->offset), Q_INCWRAP);
-	}
-}
-
-
-static void process_txdone_queue (struct fs_dev *dev, struct queue *q)
-{
-	long rq;
-	long tmp;
-	struct FS_QENTRY *qe;
-	struct sk_buff *skb;
-	struct FS_BPENTRY *td;
-
-	while (!((rq = read_fs (dev, Q_RP(q->offset))) & Q_EMPTY)) {
-		fs_dprintk (FS_DEBUG_QUEUE, "reaping txdone entry at %lx\n", rq); 
-		qe = bus_to_virt (rq);
-    
-		fs_dprintk (FS_DEBUG_QUEUE, "queue entry: %08x %08x %08x %08x: %d\n", 
-			    qe->cmd, qe->p0, qe->p1, qe->p2, STATUS_CODE (qe));
-
-		if (STATUS_CODE (qe) != 2)
-			fs_dprintk (FS_DEBUG_TXMEM, "queue entry: %08x %08x %08x %08x: %d\n", 
-				    qe->cmd, qe->p0, qe->p1, qe->p2, STATUS_CODE (qe));
-
-
-		switch (STATUS_CODE (qe)) {
-		case 0x01: /* This is for AAL0 where we put the chip in streaming mode */
-			fallthrough;
-		case 0x02:
-			/* Process a real txdone entry. */
-			tmp = qe->p0;
-			if (tmp & 0x0f)
-				printk (KERN_WARNING "td not aligned: %ld\n", tmp);
-			tmp &= ~0x0f;
-			td = bus_to_virt (tmp);
-
-			fs_dprintk (FS_DEBUG_QUEUE, "Pool entry: %08x %08x %08x %08x %p.\n", 
-				    td->flags, td->next, td->bsa, td->aal_bufsize, td->skb );
-      
-			skb = td->skb;
-			if (skb == FS_VCC (ATM_SKB(skb)->vcc)->last_skb) {
-				FS_VCC (ATM_SKB(skb)->vcc)->last_skb = NULL;
-				wake_up_interruptible (& FS_VCC (ATM_SKB(skb)->vcc)->close_wait);
-			}
-			td->dev->ntxpckts--;
-
-			{
-				static int c=0;
-	
-				if (!(c++ % 100)) {
-					fs_dprintk (FS_DEBUG_QSIZE, "[%d]", td->dev->ntxpckts);
-				}
-			}
-
-			atomic_inc(&ATM_SKB(skb)->vcc->stats->tx);
-
-			fs_dprintk (FS_DEBUG_TXMEM, "i");
-			fs_dprintk (FS_DEBUG_ALLOC, "Free t-skb: %p\n", skb);
-			fs_kfree_skb (skb);
-
-			fs_dprintk (FS_DEBUG_ALLOC, "Free trans-d: %p\n", td); 
-			memset (td, ATM_POISON_FREE, sizeof(struct FS_BPENTRY));
-			kfree (td);
-			break;
-		default:
-			/* Here we get the tx purge inhibit command ... */
-			/* Action, I believe, is "don't do anything". -- REW */
-			;
-		}
-    
-		write_fs (dev, Q_RP(q->offset), Q_INCWRAP);
-	}
-}
-
-
-static void process_incoming (struct fs_dev *dev, struct queue *q)
-{
-	long rq;
-	struct FS_QENTRY *qe;
-	struct FS_BPENTRY *pe;    
-	struct sk_buff *skb;
-	unsigned int channo;
-	struct atm_vcc *atm_vcc;
-
-	while (!((rq = read_fs (dev, Q_RP(q->offset))) & Q_EMPTY)) {
-		fs_dprintk (FS_DEBUG_QUEUE, "reaping incoming queue entry at %lx\n", rq); 
-		qe = bus_to_virt (rq);
-    
-		fs_dprintk (FS_DEBUG_QUEUE, "queue entry: %08x %08x %08x %08x.  ", 
-			    qe->cmd, qe->p0, qe->p1, qe->p2);
-
-		fs_dprintk (FS_DEBUG_QUEUE, "-> %x: %s\n", 
-			    STATUS_CODE (qe), 
-			    res_strings[STATUS_CODE(qe)]);
-
-		pe = bus_to_virt (qe->p0);
-		fs_dprintk (FS_DEBUG_QUEUE, "Pool entry: %08x %08x %08x %08x %p %p.\n", 
-			    pe->flags, pe->next, pe->bsa, pe->aal_bufsize, 
-			    pe->skb, pe->fp);
-      
-		channo = qe->cmd & 0xffff;
-
-		if (channo < dev->nchannels)
-			atm_vcc = dev->atm_vccs[channo];
-		else
-			atm_vcc = NULL;
-
-		/* Single buffer packet */
-		switch (STATUS_CODE (qe)) {
-		case 0x1:
-			/* Fall through for streaming mode */
-			fallthrough;
-		case 0x2:/* Packet received OK.... */
-			if (atm_vcc) {
-				skb = pe->skb;
-				pe->fp->n--;
-#if 0
-				fs_dprintk (FS_DEBUG_QUEUE, "Got skb: %p\n", skb);
-				if (FS_DEBUG_QUEUE & fs_debug) my_hd (bus_to_virt (pe->bsa), 0x20);
-#endif
-				skb_put (skb, qe->p1 & 0xffff); 
-				ATM_SKB(skb)->vcc = atm_vcc;
-				atomic_inc(&atm_vcc->stats->rx);
-				__net_timestamp(skb);
-				fs_dprintk (FS_DEBUG_ALLOC, "Free rec-skb: %p (pushed)\n", skb);
-				atm_vcc->push (atm_vcc, skb);
-				fs_dprintk (FS_DEBUG_ALLOC, "Free rec-d: %p\n", pe);
-				kfree (pe);
-			} else {
-				printk (KERN_ERR "Got a receive on a non-open channel %d.\n", channo);
-			}
-			break;
-		case 0x17:/* AAL 5 CRC32 error. IFF the length field is nonzero, a buffer
-			     has been consumed and needs to be processed. -- REW */
-			if (qe->p1 & 0xffff) {
-				pe = bus_to_virt (qe->p0);
-				pe->fp->n--;
-				fs_dprintk (FS_DEBUG_ALLOC, "Free rec-skb: %p\n", pe->skb);
-				dev_kfree_skb_any (pe->skb);
-				fs_dprintk (FS_DEBUG_ALLOC, "Free rec-d: %p\n", pe);
-				kfree (pe);
-			}
-			if (atm_vcc)
-				atomic_inc(&atm_vcc->stats->rx_drop);
-			break;
-		case 0x1f: /*  Reassembly abort: no buffers. */
-			/* Silently increment error counter. */
-			if (atm_vcc)
-				atomic_inc(&atm_vcc->stats->rx_drop);
-			break;
-		default: /* Hmm. Haven't written the code to handle the others yet... -- REW */
-			printk (KERN_WARNING "Don't know what to do with RX status %x: %s.\n", 
-				STATUS_CODE(qe), res_strings[STATUS_CODE (qe)]);
-		}
-		write_fs (dev, Q_RP(q->offset), Q_INCWRAP);
-	}
-}
-
-
-
-#define DO_DIRECTION(tp) ((tp)->traffic_class != ATM_NONE)
-
-static int fs_open(struct atm_vcc *atm_vcc)
-{
-	struct fs_dev *dev;
-	struct fs_vcc *vcc;
-	struct fs_transmit_config *tc;
-	struct atm_trafprm * txtp;
-	struct atm_trafprm * rxtp;
-	/*  struct fs_receive_config *rc;*/
-	/*  struct FS_QENTRY *qe; */
-	int error;
-	int bfp;
-	int to;
-	unsigned short tmc0;
-	short vpi = atm_vcc->vpi;
-	int vci = atm_vcc->vci;
-
-	func_enter ();
-
-	dev = FS_DEV(atm_vcc->dev);
-	fs_dprintk (FS_DEBUG_OPEN, "fs: open on dev: %p, vcc at %p\n", 
-		    dev, atm_vcc);
-
-	if (vci != ATM_VPI_UNSPEC && vpi != ATM_VCI_UNSPEC)
-		set_bit(ATM_VF_ADDR, &atm_vcc->flags);
-
-	if ((atm_vcc->qos.aal != ATM_AAL5) &&
-	    (atm_vcc->qos.aal != ATM_AAL2))
-	  return -EINVAL; /* XXX AAL0 */
-
-	fs_dprintk (FS_DEBUG_OPEN, "fs: (itf %d): open %d.%d\n", 
-		    atm_vcc->dev->number, atm_vcc->vpi, atm_vcc->vci);	
-
-	/* XXX handle qos parameters (rate limiting) ? */
-
-	vcc = kmalloc(sizeof(struct fs_vcc), GFP_KERNEL);
-	fs_dprintk (FS_DEBUG_ALLOC, "Alloc VCC: %p(%zd)\n", vcc, sizeof(struct fs_vcc));
-	if (!vcc) {
-		clear_bit(ATM_VF_ADDR, &atm_vcc->flags);
-		return -ENOMEM;
-	}
-  
-	atm_vcc->dev_data = vcc;
-	vcc->last_skb = NULL;
-
-	init_waitqueue_head (&vcc->close_wait);
-
-	txtp = &atm_vcc->qos.txtp;
-	rxtp = &atm_vcc->qos.rxtp;
-
-	if (!test_bit(ATM_VF_PARTIAL, &atm_vcc->flags)) {
-		if (IS_FS50(dev)) {
-			/* Increment the channel numer: take a free one next time.  */
-			for (to=33;to;to--, dev->channo++) {
-				/* We only have 32 channels */
-				if (dev->channo >= 32)
-					dev->channo = 0;
-				/* If we need to do RX, AND the RX is inuse, try the next */
-				if (DO_DIRECTION(rxtp) && dev->atm_vccs[dev->channo])
-					continue;
-				/* If we need to do TX, AND the TX is inuse, try the next */
-				if (DO_DIRECTION(txtp) && test_bit (dev->channo, dev->tx_inuse))
-					continue;
-				/* Ok, both are free! (or not needed) */
-				break;
-			}
-			if (!to) {
-				printk ("No more free channels for FS50..\n");
-				kfree(vcc);
-				return -EBUSY;
-			}
-			vcc->channo = dev->channo;
-			dev->channo &= dev->channel_mask;
-      
-		} else {
-			vcc->channo = (vpi << FS155_VCI_BITS) | (vci);
-			if (((DO_DIRECTION(rxtp) && dev->atm_vccs[vcc->channo])) ||
-			    ( DO_DIRECTION(txtp) && test_bit (vcc->channo, dev->tx_inuse))) {
-				printk ("Channel is in use for FS155.\n");
-				kfree(vcc);
-				return -EBUSY;
-			}
-		}
-		fs_dprintk (FS_DEBUG_OPEN, "OK. Allocated channel %x(%d).\n", 
-			    vcc->channo, vcc->channo);
-	}
-
-	if (DO_DIRECTION (txtp)) {
-		tc = kmalloc (sizeof (struct fs_transmit_config), GFP_KERNEL);
-		fs_dprintk (FS_DEBUG_ALLOC, "Alloc tc: %p(%zd)\n",
-			    tc, sizeof (struct fs_transmit_config));
-		if (!tc) {
-			fs_dprintk (FS_DEBUG_OPEN, "fs: can't alloc transmit_config.\n");
-			kfree(vcc);
-			return -ENOMEM;
-		}
-
-		/* Allocate the "open" entry from the high priority txq. This makes
-		   it most likely that the chip will notice it. It also prevents us
-		   from having to wait for completion. On the other hand, we may
-		   need to wait for completion anyway, to see if it completed
-		   successfully. */
-
-		switch (atm_vcc->qos.aal) {
-		case ATM_AAL2:
-		case ATM_AAL0:
-		  tc->flags = 0
-		    | TC_FLAGS_TRANSPARENT_PAYLOAD
-		    | TC_FLAGS_PACKET
-		    | (1 << 28)
-		    | TC_FLAGS_TYPE_UBR /* XXX Change to VBR -- PVDL */
-		    | TC_FLAGS_CAL0;
-		  break;
-		case ATM_AAL5:
-		  tc->flags = 0
-			| TC_FLAGS_AAL5
-			| TC_FLAGS_PACKET  /* ??? */
-			| TC_FLAGS_TYPE_CBR
-			| TC_FLAGS_CAL0;
-		  break;
-		default:
-			printk ("Unknown aal: %d\n", atm_vcc->qos.aal);
-			tc->flags = 0;
-		}
-		/* Docs are vague about this atm_hdr field. By the way, the FS
-		 * chip makes odd errors if lower bits are set.... -- REW */
-		tc->atm_hdr =  (vpi << 20) | (vci << 4); 
-		tmc0 = 0;
-		{
-			int pcr = atm_pcr_goal (txtp);
-
-			fs_dprintk (FS_DEBUG_OPEN, "pcr = %d.\n", pcr);
-
-			/* XXX Hmm. officially we're only allowed to do this if rounding 
-			   is round_down -- REW */
-			if (IS_FS50(dev)) {
-				if (pcr > 51840000/53/8)  pcr = 51840000/53/8;
-			} else {
-				if (pcr > 155520000/53/8) pcr = 155520000/53/8;
-			}
-			if (!pcr) {
-				/* no rate cap */
-				tmc0 = IS_FS50(dev)?0x61BE:0x64c9; /* Just copied over the bits from Fujitsu -- REW */
-			} else {
-				int r;
-				if (pcr < 0) {
-					r = ROUND_DOWN;
-					pcr = -pcr;
-				} else {
-					r = ROUND_UP;
-				}
-				error = make_rate (pcr, r, &tmc0, NULL);
-				if (error) {
-					kfree(tc);
-					kfree(vcc);
-					return error;
-				}
-			}
-			fs_dprintk (FS_DEBUG_OPEN, "pcr = %d.\n", pcr);
-		}
-      
-		tc->TMC[0] = tmc0 | 0x4000;
-		tc->TMC[1] = 0; /* Unused */
-		tc->TMC[2] = 0; /* Unused */
-		tc->TMC[3] = 0; /* Unused */
-    
-		tc->spec = 0;    /* UTOPIA address, UDF, HEC: Unused -> 0 */
-		tc->rtag[0] = 0; /* What should I do with routing tags??? 
-				    -- Not used -- AS -- Thanks -- REW*/
-		tc->rtag[1] = 0;
-		tc->rtag[2] = 0;
-
-		if (fs_debug & FS_DEBUG_OPEN) {
-			fs_dprintk (FS_DEBUG_OPEN, "TX config record:\n");
-			my_hd (tc, sizeof (*tc));
-		}
-
-		/* We now use the "submit_command" function to submit commands to
-		   the firestream. There is a define up near the definition of
-		   that routine that switches this routine between immediate write
-		   to the immediate command registers and queuing the commands in
-		   the HPTXQ for execution. This last technique might be more
-		   efficient if we know we're going to submit a whole lot of
-		   commands in one go, but this driver is not setup to be able to
-		   use such a construct. So it probably doen't matter much right
-		   now. -- REW */
-    
-		/* The command is IMMediate and INQueue. The parameters are out-of-line.. */
-		submit_command (dev, &dev->hp_txq, 
-				QE_CMD_CONFIG_TX | QE_CMD_IMM_INQ | vcc->channo,
-				virt_to_bus (tc), 0, 0);
-
-		submit_command (dev, &dev->hp_txq, 
-				QE_CMD_TX_EN | QE_CMD_IMM_INQ | vcc->channo,
-				0, 0, 0);
-		set_bit (vcc->channo, dev->tx_inuse);
-	}
-
-	if (DO_DIRECTION (rxtp)) {
-		dev->atm_vccs[vcc->channo] = atm_vcc;
-
-		for (bfp = 0;bfp < FS_NR_FREE_POOLS; bfp++)
-			if (atm_vcc->qos.rxtp.max_sdu <= dev->rx_fp[bfp].bufsize) break;
-		if (bfp >= FS_NR_FREE_POOLS) {
-			fs_dprintk (FS_DEBUG_OPEN, "No free pool fits sdu: %d.\n", 
-				    atm_vcc->qos.rxtp.max_sdu);
-			/* XXX Cleanup? -- Would just calling fs_close work??? -- REW */
-
-			/* XXX clear tx inuse. Close TX part? */
-			dev->atm_vccs[vcc->channo] = NULL;
-			kfree (vcc);
-			return -EINVAL;
-		}
-
-		switch (atm_vcc->qos.aal) {
-		case ATM_AAL0:
-		case ATM_AAL2:
-			submit_command (dev, &dev->hp_txq,
-					QE_CMD_CONFIG_RX | QE_CMD_IMM_INQ | vcc->channo,
-					RC_FLAGS_TRANSP |
-					RC_FLAGS_BFPS_BFP * bfp |
-					RC_FLAGS_RXBM_PSB, 0, 0);
-			break;
-		case ATM_AAL5:
-			submit_command (dev, &dev->hp_txq,
-					QE_CMD_CONFIG_RX | QE_CMD_IMM_INQ | vcc->channo,
-					RC_FLAGS_AAL5 |
-					RC_FLAGS_BFPS_BFP * bfp |
-					RC_FLAGS_RXBM_PSB, 0, 0);
-			break;
-		}
-		if (IS_FS50 (dev)) {
-			submit_command (dev, &dev->hp_txq, 
-					QE_CMD_REG_WR | QE_CMD_IMM_INQ,
-					0x80 + vcc->channo,
-					(vpi << 16) | vci, 0 ); /* XXX -- Use defines. */
-		}
-		submit_command (dev, &dev->hp_txq, 
-				QE_CMD_RX_EN | QE_CMD_IMM_INQ | vcc->channo,
-				0, 0, 0);
-	}
-    
-	/* Indicate we're done! */
-	set_bit(ATM_VF_READY, &atm_vcc->flags);
-
-	func_exit ();
-	return 0;
-}
-
-
-static void fs_close(struct atm_vcc *atm_vcc)
-{
-	struct fs_dev *dev = FS_DEV (atm_vcc->dev);
-	struct fs_vcc *vcc = FS_VCC (atm_vcc);
-	struct atm_trafprm * txtp;
-	struct atm_trafprm * rxtp;
-
-	func_enter ();
-
-	clear_bit(ATM_VF_READY, &atm_vcc->flags);
-
-	fs_dprintk (FS_DEBUG_QSIZE, "--==**[%d]**==--", dev->ntxpckts);
-	if (vcc->last_skb) {
-		fs_dprintk (FS_DEBUG_QUEUE, "Waiting for skb %p to be sent.\n", 
-			    vcc->last_skb);
-		/* We're going to wait for the last packet to get sent on this VC. It would
-		   be impolite not to send them don't you think? 
-		   XXX
-		   We don't know which packets didn't get sent. So if we get interrupted in 
-		   this sleep_on, we'll lose any reference to these packets. Memory leak!
-		   On the other hand, it's awfully convenient that we can abort a "close" that
-		   is taking too long. Maybe just use non-interruptible sleep on? -- REW */
-		wait_event_interruptible(vcc->close_wait, !vcc->last_skb);
-	}
-
-	txtp = &atm_vcc->qos.txtp;
-	rxtp = &atm_vcc->qos.rxtp;
-  
-
-	/* See App note XXX (Unpublished as of now) for the reason for the 
-	   removal of the "CMD_IMM_INQ" part of the TX_PURGE_INH... -- REW */
-
-	if (DO_DIRECTION (txtp)) {
-		submit_command (dev,  &dev->hp_txq,
-				QE_CMD_TX_PURGE_INH | /*QE_CMD_IMM_INQ|*/ vcc->channo, 0,0,0);
-		clear_bit (vcc->channo, dev->tx_inuse);
-	}
-
-	if (DO_DIRECTION (rxtp)) {
-		submit_command (dev,  &dev->hp_txq,
-				QE_CMD_RX_PURGE_INH | QE_CMD_IMM_INQ | vcc->channo, 0,0,0);
-		dev->atm_vccs [vcc->channo] = NULL;
-  
-		/* This means that this is configured as a receive channel */
-		if (IS_FS50 (dev)) {
-			/* Disable the receive filter. Is 0/0 indeed an invalid receive
-			   channel? -- REW.  Yes it is. -- Hang. Ok. I'll use -1
-			   (0xfff...) -- REW */
-			submit_command (dev, &dev->hp_txq, 
-					QE_CMD_REG_WR | QE_CMD_IMM_INQ,
-					0x80 + vcc->channo, -1, 0 ); 
-		}
-	}
-
-	fs_dprintk (FS_DEBUG_ALLOC, "Free vcc: %p\n", vcc);
-	kfree (vcc);
-
-	func_exit ();
-}
-
-
-static int fs_send (struct atm_vcc *atm_vcc, struct sk_buff *skb)
-{
-	struct fs_dev *dev = FS_DEV (atm_vcc->dev);
-	struct fs_vcc *vcc = FS_VCC (atm_vcc);
-	struct FS_BPENTRY *td;
-
-	func_enter ();
-
-	fs_dprintk (FS_DEBUG_TXMEM, "I");
-	fs_dprintk (FS_DEBUG_SEND, "Send: atm_vcc %p skb %p vcc %p dev %p\n", 
-		    atm_vcc, skb, vcc, dev);
-
-	fs_dprintk (FS_DEBUG_ALLOC, "Alloc t-skb: %p (atm_send)\n", skb);
-
-	ATM_SKB(skb)->vcc = atm_vcc;
-
-	vcc->last_skb = skb;
-
-	td = kmalloc (sizeof (struct FS_BPENTRY), GFP_ATOMIC);
-	fs_dprintk (FS_DEBUG_ALLOC, "Alloc transd: %p(%zd)\n", td, sizeof (struct FS_BPENTRY));
-	if (!td) {
-		/* Oops out of mem */
-		return -ENOMEM;
-	}
-
-	fs_dprintk (FS_DEBUG_SEND, "first word in buffer: %x\n", 
-		    *(int *) skb->data);
-
-	td->flags =  TD_EPI | TD_DATA | skb->len;
-	td->next = 0;
-	td->bsa  = virt_to_bus (skb->data);
-	td->skb = skb;
-	td->dev = dev;
-	dev->ntxpckts++;
-
-#ifdef DEBUG_EXTRA
-	da[qd] = td;
-	dq[qd].flags = td->flags;
-	dq[qd].next  = td->next;
-	dq[qd].bsa   = td->bsa;
-	dq[qd].skb   = td->skb;
-	dq[qd].dev   = td->dev;
-	qd++;
-	if (qd >= 60) qd = 0;
-#endif
-
-	submit_queue (dev, &dev->hp_txq, 
-		      QE_TRANSMIT_DE | vcc->channo,
-		      virt_to_bus (td), 0, 
-		      virt_to_bus (td));
-
-	fs_dprintk (FS_DEBUG_QUEUE, "in send: txq %d txrq %d\n", 
-		    read_fs (dev, Q_EA (dev->hp_txq.offset)) -
-		    read_fs (dev, Q_SA (dev->hp_txq.offset)),
-		    read_fs (dev, Q_EA (dev->tx_relq.offset)) -
-		    read_fs (dev, Q_SA (dev->tx_relq.offset)));
-
-	func_exit ();
-	return 0;
-}
-
-
-/* Some function placeholders for functions we don't yet support. */
-
-#if 0
-static int fs_ioctl(struct atm_dev *dev,unsigned int cmd,void __user *arg)
-{
-	func_enter ();
-	func_exit ();
-	return -ENOIOCTLCMD;
-}
-
-
-static int fs_getsockopt(struct atm_vcc *vcc,int level,int optname,
-			 void __user *optval,int optlen)
-{
-	func_enter ();
-	func_exit ();
-	return 0;
-}
-
-
-static int fs_setsockopt(struct atm_vcc *vcc,int level,int optname,
-			 void __user *optval,unsigned int optlen)
-{
-	func_enter ();
-	func_exit ();
-	return 0;
-}
-
-
-static void fs_phy_put(struct atm_dev *dev,unsigned char value,
-		       unsigned long addr)
-{
-	func_enter ();
-	func_exit ();
-}
-
-
-static unsigned char fs_phy_get(struct atm_dev *dev,unsigned long addr)
-{
-	func_enter ();
-	func_exit ();
-	return 0;
-}
-
-
-static int fs_change_qos(struct atm_vcc *vcc,struct atm_qos *qos,int flags)
-{
-	func_enter ();
-	func_exit ();
-	return 0;
-};
-
-#endif
-
-
-static const struct atmdev_ops ops = {
-	.open =         fs_open,
-	.close =        fs_close,
-	.send =         fs_send,
-	.owner =        THIS_MODULE,
-	/* ioctl:          fs_ioctl, */
-	/* change_qos:     fs_change_qos, */
-
-	/* For now implement these internally here... */  
-	/* phy_put:        fs_phy_put, */
-	/* phy_get:        fs_phy_get, */
-};
-
-
-static void undocumented_pci_fix(struct pci_dev *pdev)
-{
-	u32 tint;
-
-	/* The Windows driver says: */
-	/* Switch off FireStream Retry Limit Threshold 
-	 */
-
-	/* The register at 0x28 is documented as "reserved", no further
-	   comments. */
-
-	pci_read_config_dword (pdev, 0x28, &tint);
-	if (tint != 0x80) {
-		tint = 0x80;
-		pci_write_config_dword (pdev, 0x28, tint);
-	}
-}
-
-
-
-/**************************************************************************
- *                              PHY routines                              *
- **************************************************************************/
-
-static void write_phy(struct fs_dev *dev, int regnum, int val)
-{
-	submit_command (dev,  &dev->hp_txq, QE_CMD_PRP_WR | QE_CMD_IMM_INQ,
-			regnum, val, 0);
-}
-
-static int init_phy(struct fs_dev *dev, struct reginit_item *reginit)
-{
-	int i;
-
-	func_enter ();
-	while (reginit->reg != PHY_EOF) {
-		if (reginit->reg == PHY_CLEARALL) {
-			/* "PHY_CLEARALL means clear all registers. Numregisters is in "val". */
-			for (i=0;i<reginit->val;i++) {
-				write_phy (dev, i, 0);
-			}
-		} else {
-			write_phy (dev, reginit->reg, reginit->val);
-		}
-		reginit++;
-	}
-	func_exit ();
-	return 0;
-}
-
-static void reset_chip (struct fs_dev *dev)
-{
-	int i;
-
-	write_fs (dev, SARMODE0, SARMODE0_SRTS0);
-
-	/* Undocumented delay */
-	udelay (128);
-
-	/* The "internal registers are documented to all reset to zero, but 
-	   comments & code in the Windows driver indicates that the pools are
-	   NOT reset. */
-	for (i=0;i < FS_NR_FREE_POOLS;i++) {
-		write_fs (dev, FP_CNF (RXB_FP(i)), 0);
-		write_fs (dev, FP_SA  (RXB_FP(i)), 0);
-		write_fs (dev, FP_EA  (RXB_FP(i)), 0);
-		write_fs (dev, FP_CNT (RXB_FP(i)), 0);
-		write_fs (dev, FP_CTU (RXB_FP(i)), 0);
-	}
-
-	/* The same goes for the match channel registers, although those are
-	   NOT documented that way in the Windows driver. -- REW */
-	/* The Windows driver DOES write 0 to these registers somewhere in
-	   the init sequence. However, a small hardware-feature, will
-	   prevent reception of data on VPI/VCI = 0/0 (Unless the channel
-	   allocated happens to have no disabled channels that have a lower
-	   number. -- REW */
-
-	/* Clear the match channel registers. */
-	if (IS_FS50 (dev)) {
-		for (i=0;i<FS50_NR_CHANNELS;i++) {
-			write_fs (dev, 0x200 + i * 4, -1);
-		}
-	}
-}
-
-static void *aligned_kmalloc(int size, gfp_t flags, int alignment)
-{
-	void  *t;
-
-	if (alignment <= 0x10) {
-		t = kmalloc (size, flags);
-		if ((unsigned long)t & (alignment-1)) {
-			printk ("Kmalloc doesn't align things correctly! %p\n", t);
-			kfree (t);
-			return aligned_kmalloc (size, flags, alignment * 4);
-		}
-		return t;
-	}
-	printk (KERN_ERR "Request for > 0x10 alignment not yet implemented (hard!)\n");
-	return NULL;
-}
-
-static int init_q(struct fs_dev *dev, struct queue *txq, int queue,
-		  int nentries, int is_rq)
-{
-	int sz = nentries * sizeof (struct FS_QENTRY);
-	struct FS_QENTRY *p;
-
-	func_enter ();
-
-	fs_dprintk (FS_DEBUG_INIT, "Initializing queue at %x: %d entries:\n",
-		    queue, nentries);
-
-	p = aligned_kmalloc (sz, GFP_KERNEL, 0x10);
-	fs_dprintk (FS_DEBUG_ALLOC, "Alloc queue: %p(%d)\n", p, sz);
-
-	if (!p) return 0;
-
-	write_fs (dev, Q_SA(queue), virt_to_bus(p));
-	write_fs (dev, Q_EA(queue), virt_to_bus(p+nentries-1));
-	write_fs (dev, Q_WP(queue), virt_to_bus(p));
-	write_fs (dev, Q_RP(queue), virt_to_bus(p));
-	if (is_rq) {
-		/* Configuration for the receive queue: 0: interrupt immediately,
-		   no pre-warning to empty queues: We do our best to keep the
-		   queue filled anyway. */
-		write_fs (dev, Q_CNF(queue), 0 ); 
-	}
-
-	txq->sa = p;
-	txq->ea = p;
-	txq->offset = queue; 
-
-	func_exit ();
-	return 1;
-}
-
-
-static int init_fp(struct fs_dev *dev, struct freepool *fp, int queue,
-		   int bufsize, int nr_buffers)
-{
-	func_enter ();
-
-	fs_dprintk (FS_DEBUG_INIT, "Initializing free pool at %x:\n", queue);
-
-	write_fs (dev, FP_CNF(queue), (bufsize * RBFP_RBS) | RBFP_RBSVAL | RBFP_CME);
-	write_fs (dev, FP_SA(queue),  0);
-	write_fs (dev, FP_EA(queue),  0);
-	write_fs (dev, FP_CTU(queue), 0);
-	write_fs (dev, FP_CNT(queue), 0);
-
-	fp->offset = queue; 
-	fp->bufsize = bufsize;
-	fp->nr_buffers = nr_buffers;
-
-	func_exit ();
-	return 1;
-}
-
-
-static inline int nr_buffers_in_freepool (struct fs_dev *dev, struct freepool *fp)
-{
-#if 0
-	/* This seems to be unreliable.... */
-	return read_fs (dev, FP_CNT (fp->offset));
-#else
-	return fp->n;
-#endif
-}
-
-
-/* Check if this gets going again if a pool ever runs out.  -- Yes, it
-   does. I've seen "receive abort: no buffers" and things started
-   working again after that...  -- REW */
-
-static void top_off_fp (struct fs_dev *dev, struct freepool *fp,
-			gfp_t gfp_flags)
-{
-	struct FS_BPENTRY *qe, *ne;
-	struct sk_buff *skb;
-	int n = 0;
-	u32 qe_tmp;
-
-	fs_dprintk (FS_DEBUG_QUEUE, "Topping off queue at %x (%d-%d/%d)\n", 
-		    fp->offset, read_fs (dev, FP_CNT (fp->offset)), fp->n, 
-		    fp->nr_buffers);
-	while (nr_buffers_in_freepool(dev, fp) < fp->nr_buffers) {
-
-		skb = alloc_skb (fp->bufsize, gfp_flags);
-		fs_dprintk (FS_DEBUG_ALLOC, "Alloc rec-skb: %p(%d)\n", skb, fp->bufsize);
-		if (!skb) break;
-		ne = kmalloc (sizeof (struct FS_BPENTRY), gfp_flags);
-		fs_dprintk (FS_DEBUG_ALLOC, "Alloc rec-d: %p(%zd)\n", ne, sizeof (struct FS_BPENTRY));
-		if (!ne) {
-			fs_dprintk (FS_DEBUG_ALLOC, "Free rec-skb: %p\n", skb);
-			dev_kfree_skb_any (skb);
-			break;
-		}
-
-		fs_dprintk (FS_DEBUG_QUEUE, "Adding skb %p desc %p -> %p(%p) ", 
-			    skb, ne, skb->data, skb->head);
-		n++;
-		ne->flags = FP_FLAGS_EPI | fp->bufsize;
-		ne->next  = virt_to_bus (NULL);
-		ne->bsa   = virt_to_bus (skb->data);
-		ne->aal_bufsize = fp->bufsize;
-		ne->skb = skb;
-		ne->fp = fp;
-
-		/*
-		 * FIXME: following code encodes and decodes
-		 * machine pointers (could be 64-bit) into a
-		 * 32-bit register.
-		 */
-
-		qe_tmp = read_fs (dev, FP_EA(fp->offset));
-		fs_dprintk (FS_DEBUG_QUEUE, "link at %x\n", qe_tmp);
-		if (qe_tmp) {
-			qe = bus_to_virt ((long) qe_tmp);
-			qe->next = virt_to_bus(ne);
-			qe->flags &= ~FP_FLAGS_EPI;
-		} else
-			write_fs (dev, FP_SA(fp->offset), virt_to_bus(ne));
-
-		write_fs (dev, FP_EA(fp->offset), virt_to_bus (ne));
-		fp->n++;   /* XXX Atomic_inc? */
-		write_fs (dev, FP_CTU(fp->offset), 1);
-	}
-
-	fs_dprintk (FS_DEBUG_QUEUE, "Added %d entries. \n", n);
-}
-
-static void free_queue(struct fs_dev *dev, struct queue *txq)
-{
-	func_enter ();
-
-	write_fs (dev, Q_SA(txq->offset), 0);
-	write_fs (dev, Q_EA(txq->offset), 0);
-	write_fs (dev, Q_RP(txq->offset), 0);
-	write_fs (dev, Q_WP(txq->offset), 0);
-	/* Configuration ? */
-
-	fs_dprintk (FS_DEBUG_ALLOC, "Free queue: %p\n", txq->sa);
-	kfree (txq->sa);
-
-	func_exit ();
-}
-
-static void free_freepool(struct fs_dev *dev, struct freepool *fp)
-{
-	func_enter ();
-
-	write_fs (dev, FP_CNF(fp->offset), 0);
-	write_fs (dev, FP_SA (fp->offset), 0);
-	write_fs (dev, FP_EA (fp->offset), 0);
-	write_fs (dev, FP_CNT(fp->offset), 0);
-	write_fs (dev, FP_CTU(fp->offset), 0);
-
-	func_exit ();
-}
-
-
-
-static irqreturn_t fs_irq (int irq, void *dev_id) 
-{
-	int i;
-	u32 status;
-	struct fs_dev *dev = dev_id;
-
-	status = read_fs (dev, ISR);
-	if (!status)
-		return IRQ_NONE;
-
-	func_enter ();
-
-#ifdef IRQ_RATE_LIMIT
-	/* Aaargh! I'm ashamed. This costs more lines-of-code than the actual 
-	   interrupt routine!. (Well, used to when I wrote that comment) -- REW */
-	{
-		static int lastjif;
-		static int nintr=0;
-    
-		if (lastjif == jiffies) {
-			if (++nintr > IRQ_RATE_LIMIT) {
-				free_irq (dev->irq, dev_id);
-				printk (KERN_ERR "fs: Too many interrupts. Turning off interrupt %d.\n", 
-					dev->irq);
-			}
-		} else {
-			lastjif = jiffies;
-			nintr = 0;
-		}
-	}
-#endif
-	fs_dprintk (FS_DEBUG_QUEUE, "in intr: txq %d txrq %d\n", 
-		    read_fs (dev, Q_EA (dev->hp_txq.offset)) -
-		    read_fs (dev, Q_SA (dev->hp_txq.offset)),
-		    read_fs (dev, Q_EA (dev->tx_relq.offset)) -
-		    read_fs (dev, Q_SA (dev->tx_relq.offset)));
-
-	/* print the bits in the ISR register. */
-	if (fs_debug & FS_DEBUG_IRQ) {
-		/* The FS_DEBUG things are unnecessary here. But this way it is
-		   clear for grep that these are debug prints. */
-		fs_dprintk (FS_DEBUG_IRQ,  "IRQ status:");
-		for (i=0;i<27;i++) 
-			if (status & (1 << i)) 
-				fs_dprintk (FS_DEBUG_IRQ, " %s", irq_bitname[i]);
-		fs_dprintk (FS_DEBUG_IRQ, "\n");
-	}
-  
-	if (status & ISR_RBRQ0_W) {
-		fs_dprintk (FS_DEBUG_IRQ, "Iiiin-coming (0)!!!!\n");
-		process_incoming (dev, &dev->rx_rq[0]);
-		/* items mentioned on RBRQ0 are from FP 0 or 1. */
-		top_off_fp (dev, &dev->rx_fp[0], GFP_ATOMIC);
-		top_off_fp (dev, &dev->rx_fp[1], GFP_ATOMIC);
-	}
-
-	if (status & ISR_RBRQ1_W) {
-		fs_dprintk (FS_DEBUG_IRQ, "Iiiin-coming (1)!!!!\n");
-		process_incoming (dev, &dev->rx_rq[1]);
-		top_off_fp (dev, &dev->rx_fp[2], GFP_ATOMIC);
-		top_off_fp (dev, &dev->rx_fp[3], GFP_ATOMIC);
-	}
-
-	if (status & ISR_RBRQ2_W) {
-		fs_dprintk (FS_DEBUG_IRQ, "Iiiin-coming (2)!!!!\n");
-		process_incoming (dev, &dev->rx_rq[2]);
-		top_off_fp (dev, &dev->rx_fp[4], GFP_ATOMIC);
-		top_off_fp (dev, &dev->rx_fp[5], GFP_ATOMIC);
-	}
-
-	if (status & ISR_RBRQ3_W) {
-		fs_dprintk (FS_DEBUG_IRQ, "Iiiin-coming (3)!!!!\n");
-		process_incoming (dev, &dev->rx_rq[3]);
-		top_off_fp (dev, &dev->rx_fp[6], GFP_ATOMIC);
-		top_off_fp (dev, &dev->rx_fp[7], GFP_ATOMIC);
-	}
-
-	if (status & ISR_CSQ_W) {
-		fs_dprintk (FS_DEBUG_IRQ, "Command executed ok!\n");
-		process_return_queue (dev, &dev->st_q);
-	}
-
-	if (status & ISR_TBRQ_W) {
-		fs_dprintk (FS_DEBUG_IRQ, "Data transmitted!\n");
-		process_txdone_queue (dev, &dev->tx_relq);
-	}
-
-	func_exit ();
-	return IRQ_HANDLED;
-}
-
-
-#ifdef FS_POLL_FREQ
-static void fs_poll (struct timer_list *t)
-{
-	struct fs_dev *dev = from_timer(dev, t, timer);
-  
-	fs_irq (0, dev);
-	dev->timer.expires = jiffies + FS_POLL_FREQ;
-	add_timer (&dev->timer);
-}
-#endif
-
-static int fs_init(struct fs_dev *dev)
-{
-	struct pci_dev  *pci_dev;
-	int isr, to;
-	int i;
-
-	func_enter ();
-	pci_dev = dev->pci_dev;
-
-	printk (KERN_INFO "found a FireStream %d card, base %16llx, irq%d.\n",
-		IS_FS50(dev)?50:155,
-		(unsigned long long)pci_resource_start(pci_dev, 0),
-		dev->pci_dev->irq);
-
-	if (fs_debug & FS_DEBUG_INIT)
-		my_hd ((unsigned char *) dev, sizeof (*dev));
-
-	undocumented_pci_fix (pci_dev);
-
-	dev->hw_base = pci_resource_start(pci_dev, 0);
-
-	dev->base = ioremap(dev->hw_base, 0x1000);
-	if (!dev->base)
-		return 1;
-
-	reset_chip (dev);
-  
-	write_fs (dev, SARMODE0, 0 
-		  | (0 * SARMODE0_SHADEN) /* We don't use shadow registers. */
-		  | (1 * SARMODE0_INTMODE_READCLEAR)
-		  | (1 * SARMODE0_CWRE)
-		  | (IS_FS50(dev) ? SARMODE0_PRPWT_FS50_5:
-			  SARMODE0_PRPWT_FS155_3)
-		  | (1 * SARMODE0_CALSUP_1)
-		  | (IS_FS50(dev) ? (0
-				   | SARMODE0_RXVCS_32
-				   | SARMODE0_ABRVCS_32 
-				   | SARMODE0_TXVCS_32):
-		                  (0
-				   | SARMODE0_RXVCS_1k
-				   | SARMODE0_ABRVCS_1k 
-				   | SARMODE0_TXVCS_1k)));
-
-	/* 10ms * 100 is 1 second. That should be enough, as AN3:9 says it takes
-	   1ms. */
-	to = 100;
-	while (--to) {
-		isr = read_fs (dev, ISR);
-
-		/* This bit is documented as "RESERVED" */
-		if (isr & ISR_INIT_ERR) {
-			printk (KERN_ERR "Error initializing the FS... \n");
-			goto unmap;
-		}
-		if (isr & ISR_INIT) {
-			fs_dprintk (FS_DEBUG_INIT, "Ha! Initialized OK!\n");
-			break;
-		}
-
-		/* Try again after 10ms. */
-		msleep(10);
-	}
-
-	if (!to) {
-		printk (KERN_ERR "timeout initializing the FS... \n");
-		goto unmap;
-	}
-
-	/* XXX fix for fs155 */
-	dev->channel_mask = 0x1f; 
-	dev->channo = 0;
-
-	/* AN3: 10 */
-	write_fs (dev, SARMODE1, 0 
-		  | (fs_keystream * SARMODE1_DEFHEC) /* XXX PHY */
-		  | ((loopback == 1) * SARMODE1_TSTLP) /* XXX Loopback mode enable... */
-		  | (1 * SARMODE1_DCRM)
-		  | (1 * SARMODE1_DCOAM)
-		  | (0 * SARMODE1_OAMCRC)
-		  | (0 * SARMODE1_DUMPE)
-		  | (0 * SARMODE1_GPLEN) 
-		  | (0 * SARMODE1_GNAM)
-		  | (0 * SARMODE1_GVAS)
-		  | (0 * SARMODE1_GPAS)
-		  | (1 * SARMODE1_GPRI)
-		  | (0 * SARMODE1_PMS)
-		  | (0 * SARMODE1_GFCR)
-		  | (1 * SARMODE1_HECM2)
-		  | (1 * SARMODE1_HECM1)
-		  | (1 * SARMODE1_HECM0)
-		  | (1 << 12) /* That's what hang's driver does. Program to 0 */
-		  | (0 * 0xff) /* XXX FS155 */);
-
-
-	/* Cal prescale etc */
-
-	/* AN3: 11 */
-	write_fs (dev, TMCONF, 0x0000000f);
-	write_fs (dev, CALPRESCALE, 0x01010101 * num);
-	write_fs (dev, 0x80, 0x000F00E4);
-
-	/* AN3: 12 */
-	write_fs (dev, CELLOSCONF, 0
-		  | (   0 * CELLOSCONF_CEN)
-		  | (       CELLOSCONF_SC1)
-		  | (0x80 * CELLOSCONF_COBS)
-		  | (num  * CELLOSCONF_COPK)  /* Changed from 0xff to 0x5a */
-		  | (num  * CELLOSCONF_COST));/* after a hint from Hang. 
-					       * performance jumped 50->70... */
-
-	/* Magic value by Hang */
-	write_fs (dev, CELLOSCONF_COST, 0x0B809191);
-
-	if (IS_FS50 (dev)) {
-		write_fs (dev, RAS0, RAS0_DCD_XHLT);
-		dev->atm_dev->ci_range.vpi_bits = 12;
-		dev->atm_dev->ci_range.vci_bits = 16;
-		dev->nchannels = FS50_NR_CHANNELS;
-	} else {
-		write_fs (dev, RAS0, RAS0_DCD_XHLT 
-			  | (((1 << FS155_VPI_BITS) - 1) * RAS0_VPSEL)
-			  | (((1 << FS155_VCI_BITS) - 1) * RAS0_VCSEL));
-		/* We can chose the split arbitrarily. We might be able to 
-		   support more. Whatever. This should do for now. */
-		dev->atm_dev->ci_range.vpi_bits = FS155_VPI_BITS;
-		dev->atm_dev->ci_range.vci_bits = FS155_VCI_BITS;
-    
-		/* Address bits we can't use should be compared to 0. */
-		write_fs (dev, RAC, 0);
-
-		/* Manual (AN9, page 6) says ASF1=0 means compare Utopia address
-		 * too.  I can't find ASF1 anywhere. Anyway, we AND with just the
-		 * other bits, then compare with 0, which is exactly what we
-		 * want. */
-		write_fs (dev, RAM, (1 << (28 - FS155_VPI_BITS - FS155_VCI_BITS)) - 1);
-		dev->nchannels = FS155_NR_CHANNELS;
-	}
-	dev->atm_vccs = kcalloc (dev->nchannels, sizeof (struct atm_vcc *),
-				 GFP_KERNEL);
-	fs_dprintk (FS_DEBUG_ALLOC, "Alloc atmvccs: %p(%zd)\n",
-		    dev->atm_vccs, dev->nchannels * sizeof (struct atm_vcc *));
-
-	if (!dev->atm_vccs) {
-		printk (KERN_WARNING "Couldn't allocate memory for VCC buffers. Woops!\n");
-		/* XXX Clean up..... */
-		goto unmap;
-	}
-
-	dev->tx_inuse = kzalloc (dev->nchannels / 8 /* bits/byte */ , GFP_KERNEL);
-	fs_dprintk (FS_DEBUG_ALLOC, "Alloc tx_inuse: %p(%d)\n", 
-		    dev->atm_vccs, dev->nchannels / 8);
-
-	if (!dev->tx_inuse) {
-		printk (KERN_WARNING "Couldn't allocate memory for tx_inuse bits!\n");
-		/* XXX Clean up..... */
-		goto unmap;
-	}
-	/* -- RAS1 : FS155 and 50 differ. Default (0) should be OK for both */
-	/* -- RAS2 : FS50 only: Default is OK. */
-
-	/* DMAMODE, default should be OK. -- REW */
-	write_fs (dev, DMAMR, DMAMR_TX_MODE_FULL);
-
-	init_q (dev, &dev->hp_txq, TX_PQ(TXQ_HP), TXQ_NENTRIES, 0);
-	init_q (dev, &dev->lp_txq, TX_PQ(TXQ_LP), TXQ_NENTRIES, 0);
-	init_q (dev, &dev->tx_relq, TXB_RQ, TXQ_NENTRIES, 1);
-	init_q (dev, &dev->st_q, ST_Q, TXQ_NENTRIES, 1);
-
-	for (i=0;i < FS_NR_FREE_POOLS;i++) {
-		init_fp (dev, &dev->rx_fp[i], RXB_FP(i), 
-			 rx_buf_sizes[i], rx_pool_sizes[i]);
-		top_off_fp (dev, &dev->rx_fp[i], GFP_KERNEL);
-	}
-
-
-	for (i=0;i < FS_NR_RX_QUEUES;i++)
-		init_q (dev, &dev->rx_rq[i], RXB_RQ(i), RXRQ_NENTRIES, 1);
-
-	dev->irq = pci_dev->irq;
-	if (request_irq (dev->irq, fs_irq, IRQF_SHARED, "firestream", dev)) {
-		printk (KERN_WARNING "couldn't get irq %d for firestream.\n", pci_dev->irq);
-		/* XXX undo all previous stuff... */
-		goto unmap;
-	}
-	fs_dprintk (FS_DEBUG_INIT, "Grabbed irq %d for dev at %p.\n", dev->irq, dev);
-  
-	/* We want to be notified of most things. Just the statistics count
-	   overflows are not interesting */
-	write_fs (dev, IMR, 0
-		  | ISR_RBRQ0_W 
-		  | ISR_RBRQ1_W 
-		  | ISR_RBRQ2_W 
-		  | ISR_RBRQ3_W 
-		  | ISR_TBRQ_W
-		  | ISR_CSQ_W);
-
-	write_fs (dev, SARMODE0, 0 
-		  | (0 * SARMODE0_SHADEN) /* We don't use shadow registers. */
-		  | (1 * SARMODE0_GINT)
-		  | (1 * SARMODE0_INTMODE_READCLEAR)
-		  | (0 * SARMODE0_CWRE)
-		  | (IS_FS50(dev)?SARMODE0_PRPWT_FS50_5: 
-		                  SARMODE0_PRPWT_FS155_3)
-		  | (1 * SARMODE0_CALSUP_1)
-		  | (IS_FS50 (dev)?(0
-				    | SARMODE0_RXVCS_32
-				    | SARMODE0_ABRVCS_32 
-				    | SARMODE0_TXVCS_32):
-		                   (0
-				    | SARMODE0_RXVCS_1k
-				    | SARMODE0_ABRVCS_1k 
-				    | SARMODE0_TXVCS_1k))
-		  | (1 * SARMODE0_RUN));
-
-	init_phy (dev, PHY_NTC_INIT);
-
-	if (loopback == 2) {
-		write_phy (dev, 0x39, 0x000e);
-	}
-
-#ifdef FS_POLL_FREQ
-	timer_setup(&dev->timer, fs_poll, 0);
-	dev->timer.expires = jiffies + FS_POLL_FREQ;
-	add_timer (&dev->timer);
-#endif
-
-	dev->atm_dev->dev_data = dev;
-  
-	func_exit ();
-	return 0;
-unmap:
-	iounmap(dev->base);
-	return 1;
-}
-
-static int firestream_init_one(struct pci_dev *pci_dev,
-			       const struct pci_device_id *ent)
-{
-	struct atm_dev *atm_dev;
-	struct fs_dev *fs_dev;
-	
-	if (pci_enable_device(pci_dev)) 
-		goto err_out;
-
-	fs_dev = kzalloc (sizeof (struct fs_dev), GFP_KERNEL);
-	fs_dprintk (FS_DEBUG_ALLOC, "Alloc fs-dev: %p(%zd)\n",
-		    fs_dev, sizeof (struct fs_dev));
-	if (!fs_dev)
-		goto err_out;
-	atm_dev = atm_dev_register("fs", &pci_dev->dev, &ops, -1, NULL);
-	if (!atm_dev)
-		goto err_out_free_fs_dev;
-  
-	fs_dev->pci_dev = pci_dev;
-	fs_dev->atm_dev = atm_dev;
-	fs_dev->flags = ent->driver_data;
-
-	if (fs_init(fs_dev))
-		goto err_out_free_atm_dev;
-
-	fs_dev->next = fs_boards;
-	fs_boards = fs_dev;
-	return 0;
-
- err_out_free_atm_dev:
-	atm_dev_deregister(atm_dev);
- err_out_free_fs_dev:
- 	kfree(fs_dev);
- err_out:
-	return -ENODEV;
-}
-
-static void firestream_remove_one(struct pci_dev *pdev)
-{
-	int i;
-	struct fs_dev *dev, *nxtdev;
-	struct fs_vcc *vcc;
-	struct FS_BPENTRY *fp, *nxt;
-  
-	func_enter ();
-
-#if 0
-	printk ("hptxq:\n");
-	for (i=0;i<60;i++) {
-		printk ("%d: %08x %08x %08x %08x \n", 
-			i, pq[qp].cmd, pq[qp].p0, pq[qp].p1, pq[qp].p2);
-		qp++;
-		if (qp >= 60) qp = 0;
-	}
-
-	printk ("descriptors:\n");
-	for (i=0;i<60;i++) {
-		printk ("%d: %p: %08x %08x %p %p\n", 
-			i, da[qd], dq[qd].flags, dq[qd].bsa, dq[qd].skb, dq[qd].dev);
-		qd++;
-		if (qd >= 60) qd = 0;
-	}
-#endif
-
-	for (dev = fs_boards;dev != NULL;dev=nxtdev) {
-		fs_dprintk (FS_DEBUG_CLEANUP, "Releasing resources for dev at %p.\n", dev);
-
-		/* XXX Hit all the tx channels too! */
-
-		for (i=0;i < dev->nchannels;i++) {
-			if (dev->atm_vccs[i]) {
-				vcc = FS_VCC (dev->atm_vccs[i]);
-				submit_command (dev,  &dev->hp_txq,
-						QE_CMD_TX_PURGE_INH | QE_CMD_IMM_INQ | vcc->channo, 0,0,0);
-				submit_command (dev,  &dev->hp_txq,
-						QE_CMD_RX_PURGE_INH | QE_CMD_IMM_INQ | vcc->channo, 0,0,0);
-
-			}
-		}
-
-		/* XXX Wait a while for the chip to release all buffers. */
-
-		for (i=0;i < FS_NR_FREE_POOLS;i++) {
-			for (fp=bus_to_virt (read_fs (dev, FP_SA(dev->rx_fp[i].offset)));
-			     !(fp->flags & FP_FLAGS_EPI);fp = nxt) {
-				fs_dprintk (FS_DEBUG_ALLOC, "Free rec-skb: %p\n", fp->skb);
-				dev_kfree_skb_any (fp->skb);
-				nxt = bus_to_virt (fp->next);
-				fs_dprintk (FS_DEBUG_ALLOC, "Free rec-d: %p\n", fp);
-				kfree (fp);
-			}
-			fs_dprintk (FS_DEBUG_ALLOC, "Free rec-skb: %p\n", fp->skb);
-			dev_kfree_skb_any (fp->skb);
-			fs_dprintk (FS_DEBUG_ALLOC, "Free rec-d: %p\n", fp);
-			kfree (fp);
-		}
-
-		/* Hang the chip in "reset", prevent it clobbering memory that is
-		   no longer ours. */
-		reset_chip (dev);
-
-		fs_dprintk (FS_DEBUG_CLEANUP, "Freeing irq%d.\n", dev->irq);
-		free_irq (dev->irq, dev);
-		del_timer_sync (&dev->timer);
-
-		atm_dev_deregister(dev->atm_dev);
-		free_queue (dev, &dev->hp_txq);
-		free_queue (dev, &dev->lp_txq);
-		free_queue (dev, &dev->tx_relq);
-		free_queue (dev, &dev->st_q);
-
-		fs_dprintk (FS_DEBUG_ALLOC, "Free atmvccs: %p\n", dev->atm_vccs);
-		kfree (dev->atm_vccs);
-
-		for (i=0;i< FS_NR_FREE_POOLS;i++)
-			free_freepool (dev, &dev->rx_fp[i]);
-    
-		for (i=0;i < FS_NR_RX_QUEUES;i++)
-			free_queue (dev, &dev->rx_rq[i]);
-
-		iounmap(dev->base);
-		fs_dprintk (FS_DEBUG_ALLOC, "Free fs-dev: %p\n", dev);
-		nxtdev = dev->next;
-		kfree (dev);
-	}
-
-	func_exit ();
-}
-
-static const struct pci_device_id firestream_pci_tbl[] = {
-	{ PCI_VDEVICE(FUJITSU_ME, PCI_DEVICE_ID_FUJITSU_FS50), FS_IS50},
-	{ PCI_VDEVICE(FUJITSU_ME, PCI_DEVICE_ID_FUJITSU_FS155), FS_IS155},
-	{ 0, }
-};
-
-MODULE_DEVICE_TABLE(pci, firestream_pci_tbl);
-
-static struct pci_driver firestream_driver = {
-	.name		= "firestream",
-	.id_table	= firestream_pci_tbl,
-	.probe		= firestream_init_one,
-	.remove		= firestream_remove_one,
-};
-
-static int __init firestream_init_module (void)
-{
-	int error;
-
-	func_enter ();
-	error = pci_register_driver(&firestream_driver);
-	func_exit ();
-	return error;
-}
-
-static void __exit firestream_cleanup_module(void)
-{
-	pci_unregister_driver(&firestream_driver);
-}
-
-module_init(firestream_init_module);
-module_exit(firestream_cleanup_module);
-
-MODULE_LICENSE("GPL");
-
-
-
diff --git a/drivers/atm/firestream.h b/drivers/atm/firestream.h
deleted file mode 100644
index 6d684160808d..000000000000
--- a/drivers/atm/firestream.h
+++ /dev/null
@@ -1,502 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/* drivers/atm/firestream.h - FireStream 155 (MB86697) and
- *                            FireStream  50 (MB86695) device driver 
- */
- 
-/* Written & (C) 2000 by R.E.Wolff@BitWizard.nl 
- * Copied snippets from zatm.c by Werner Almesberger, EPFL LRC/ICA 
- * and ambassador.c Copyright (C) 1995-1999  Madge Networks Ltd 
- */
-
-/*
-*/
-
-
-/***********************************************************************
- *                  first the defines for the chip.                    *
- ***********************************************************************/
-
-
-/********************* General chip parameters. ************************/
-
-#define FS_NR_FREE_POOLS   8
-#define FS_NR_RX_QUEUES    4
-
-
-/********************* queues and queue access macros ******************/
-
-
-/* A queue entry. */
-struct FS_QENTRY {
-	u32 cmd;
-	u32 p0, p1, p2;
-};
-
-
-/* A freepool entry. */
-struct FS_BPENTRY {
-	u32 flags;
-	u32 next;
-	u32 bsa;
-	u32 aal_bufsize;
-
-	/* The hardware doesn't look at this, but we need the SKB somewhere... */
-	struct sk_buff *skb;
-	struct freepool *fp;
-	struct fs_dev *dev;
-};
-
-
-#define STATUS_CODE(qe)  ((qe->cmd >> 22) & 0x3f)
-
-
-/* OFFSETS against the base of a QUEUE... */
-#define QSA     0x00
-#define QEA     0x04
-#define QRP     0x08
-#define QWP     0x0c
-#define QCNF    0x10   /* Only for Release queues! */
-/* Not for the transmit pending queue. */
-
-
-/* OFFSETS against the base of a FREE POOL... */
-#define FPCNF   0x00
-#define FPSA    0x04
-#define FPEA    0x08
-#define FPCNT   0x0c
-#define FPCTU   0x10
-
-#define Q_SA(b)     (b + QSA )
-#define Q_EA(b)     (b + QEA )
-#define Q_RP(b)     (b + QRP )
-#define Q_WP(b)     (b + QWP )
-#define Q_CNF(b)    (b + QCNF)
-
-#define FP_CNF(b)   (b + FPCNF)
-#define FP_SA(b)    (b + FPSA)
-#define FP_EA(b)    (b + FPEA)
-#define FP_CNT(b)   (b + FPCNT)
-#define FP_CTU(b)   (b + FPCTU)
-
-/* bits in a queue register. */
-#define Q_FULL      0x1
-#define Q_EMPTY     0x2
-#define Q_INCWRAP   0x4
-#define Q_ADDR_MASK 0xfffffff0
-
-/* bits in a FreePool config register */
-#define RBFP_RBS    (0x1 << 16)
-#define RBFP_RBSVAL (0x1 << 15)
-#define RBFP_CME    (0x1 << 12)
-#define RBFP_DLP    (0x1 << 11)
-#define RBFP_BFPWT  (0x1 <<  0)
-
-
-
-
-/* FireStream commands. */
-#define QE_CMD_NULL             (0x00 << 22)
-#define QE_CMD_REG_RD           (0x01 << 22)
-#define QE_CMD_REG_RDM          (0x02 << 22)
-#define QE_CMD_REG_WR           (0x03 << 22)
-#define QE_CMD_REG_WRM          (0x04 << 22)
-#define QE_CMD_CONFIG_TX        (0x05 << 22)
-#define QE_CMD_CONFIG_RX        (0x06 << 22)
-#define QE_CMD_PRP_RD           (0x07 << 22)
-#define QE_CMD_PRP_RDM          (0x2a << 22)
-#define QE_CMD_PRP_WR           (0x09 << 22)
-#define QE_CMD_PRP_WRM          (0x2b << 22)
-#define QE_CMD_RX_EN            (0x0a << 22)
-#define QE_CMD_RX_PURGE         (0x0b << 22)
-#define QE_CMD_RX_PURGE_INH     (0x0c << 22)
-#define QE_CMD_TX_EN            (0x0d << 22)
-#define QE_CMD_TX_PURGE         (0x0e << 22)
-#define QE_CMD_TX_PURGE_INH     (0x0f << 22)
-#define QE_CMD_RST_CG           (0x10 << 22)
-#define QE_CMD_SET_CG           (0x11 << 22)
-#define QE_CMD_RST_CLP          (0x12 << 22)
-#define QE_CMD_SET_CLP          (0x13 << 22)
-#define QE_CMD_OVERRIDE         (0x14 << 22)
-#define QE_CMD_ADD_BFP          (0x15 << 22)
-#define QE_CMD_DUMP_TX          (0x16 << 22)
-#define QE_CMD_DUMP_RX          (0x17 << 22)
-#define QE_CMD_LRAM_RD          (0x18 << 22)
-#define QE_CMD_LRAM_RDM         (0x28 << 22)
-#define QE_CMD_LRAM_WR          (0x19 << 22)
-#define QE_CMD_LRAM_WRM         (0x29 << 22)
-#define QE_CMD_LRAM_BSET        (0x1a << 22)
-#define QE_CMD_LRAM_BCLR        (0x1b << 22)
-#define QE_CMD_CONFIG_SEGM      (0x1c << 22)
-#define QE_CMD_READ_SEGM        (0x1d << 22)
-#define QE_CMD_CONFIG_ROUT      (0x1e << 22)
-#define QE_CMD_READ_ROUT        (0x1f << 22)
-#define QE_CMD_CONFIG_TM        (0x20 << 22)
-#define QE_CMD_READ_TM          (0x21 << 22)
-#define QE_CMD_CONFIG_TXBM      (0x22 << 22)
-#define QE_CMD_READ_TXBM        (0x23 << 22)
-#define QE_CMD_CONFIG_RXBM      (0x24 << 22)
-#define QE_CMD_READ_RXBM        (0x25 << 22)
-#define QE_CMD_CONFIG_REAS      (0x26 << 22)
-#define QE_CMD_READ_REAS        (0x27 << 22)
-
-#define QE_TRANSMIT_DE          (0x0 << 30)
-#define QE_CMD_LINKED           (0x1 << 30)
-#define QE_CMD_IMM              (0x2 << 30)
-#define QE_CMD_IMM_INQ          (0x3 << 30)
-
-#define TD_EPI                  (0x1 << 27)
-#define TD_COMMAND              (0x1 << 28)
-
-#define TD_DATA                 (0x0 << 29)
-#define TD_RM_CELL              (0x1 << 29)
-#define TD_OAM_CELL             (0x2 << 29)
-#define TD_OAM_CELL_SEGMENT     (0x3 << 29)
-
-#define TD_BPI                  (0x1 << 20)
-
-#define FP_FLAGS_EPI            (0x1 << 27)
-
-
-#define TX_PQ(i)  (0x00  + (i) * 0x10)
-#define TXB_RQ    (0x20)
-#define ST_Q      (0x48)
-#define RXB_FP(i) (0x90  + (i) * 0x14)
-#define RXB_RQ(i) (0x134 + (i) * 0x14)
-
-
-#define TXQ_HP 0
-#define TXQ_LP 1
-
-/* Phew. You don't want to know how many revisions these simple queue
- * address macros went through before I got them nice and compact as
- * they are now. -- REW
- */
-
-
-/* And now for something completely different: 
- * The rest of the registers... */
-
-
-#define CMDR0 0x34
-#define CMDR1 0x38
-#define CMDR2 0x3c
-#define CMDR3 0x40
-
-
-#define SARMODE0     0x5c
-
-#define SARMODE0_TXVCS_0    (0x0 << 0)
-#define SARMODE0_TXVCS_1k   (0x1 << 0)
-#define SARMODE0_TXVCS_2k   (0x2 << 0)
-#define SARMODE0_TXVCS_4k   (0x3 << 0)
-#define SARMODE0_TXVCS_8k   (0x4 << 0)
-#define SARMODE0_TXVCS_16k  (0x5 << 0)
-#define SARMODE0_TXVCS_32k  (0x6 << 0)
-#define SARMODE0_TXVCS_64k  (0x7 << 0)
-#define SARMODE0_TXVCS_32   (0x8 << 0)
-
-#define SARMODE0_ABRVCS_0   (0x0 << 4)
-#define SARMODE0_ABRVCS_512 (0x1 << 4)
-#define SARMODE0_ABRVCS_1k  (0x2 << 4)
-#define SARMODE0_ABRVCS_2k  (0x3 << 4)
-#define SARMODE0_ABRVCS_4k  (0x4 << 4)
-#define SARMODE0_ABRVCS_8k  (0x5 << 4)
-#define SARMODE0_ABRVCS_16k (0x6 << 4)
-#define SARMODE0_ABRVCS_32k (0x7 << 4)
-#define SARMODE0_ABRVCS_32  (0x9 << 4) /* The others are "8", this one really has to 
-					  be 9. Tell me you don't believe me. -- REW */
-
-#define SARMODE0_RXVCS_0    (0x0 << 8)
-#define SARMODE0_RXVCS_1k   (0x1 << 8)
-#define SARMODE0_RXVCS_2k   (0x2 << 8)
-#define SARMODE0_RXVCS_4k   (0x3 << 8)
-#define SARMODE0_RXVCS_8k   (0x4 << 8)
-#define SARMODE0_RXVCS_16k  (0x5 << 8)
-#define SARMODE0_RXVCS_32k  (0x6 << 8)
-#define SARMODE0_RXVCS_64k  (0x7 << 8)
-#define SARMODE0_RXVCS_32   (0x8 << 8) 
-
-#define SARMODE0_CALSUP_1  (0x0 << 12)
-#define SARMODE0_CALSUP_2  (0x1 << 12)
-#define SARMODE0_CALSUP_3  (0x2 << 12)
-#define SARMODE0_CALSUP_4  (0x3 << 12)
-
-#define SARMODE0_PRPWT_FS50_0  (0x0 << 14)
-#define SARMODE0_PRPWT_FS50_2  (0x1 << 14)
-#define SARMODE0_PRPWT_FS50_5  (0x2 << 14)
-#define SARMODE0_PRPWT_FS50_11 (0x3 << 14)
-
-#define SARMODE0_PRPWT_FS155_0 (0x0 << 14)
-#define SARMODE0_PRPWT_FS155_1 (0x1 << 14)
-#define SARMODE0_PRPWT_FS155_2 (0x2 << 14)
-#define SARMODE0_PRPWT_FS155_3 (0x3 << 14)
-
-#define SARMODE0_SRTS0     (0x1 << 23)
-#define SARMODE0_SRTS1     (0x1 << 24)
-
-#define SARMODE0_RUN       (0x1 << 25)
-
-#define SARMODE0_UNLOCK    (0x1 << 26)
-#define SARMODE0_CWRE      (0x1 << 27)
-
-
-#define SARMODE0_INTMODE_READCLEAR          (0x0 << 28)
-#define SARMODE0_INTMODE_READNOCLEAR        (0x1 << 28)
-#define SARMODE0_INTMODE_READNOCLEARINHIBIT (0x2 << 28)
-#define SARMODE0_INTMODE_READCLEARINHIBIT   (0x3 << 28)  /* Tell me you don't believe me. */
-
-#define SARMODE0_GINT      (0x1 << 30)
-#define SARMODE0_SHADEN    (0x1 << 31)
-
-
-#define SARMODE1     0x60
-
-
-#define SARMODE1_TRTL_SHIFT 0   /* Program to 0 */
-#define SARMODE1_RRTL_SHIFT 4   /* Program to 0 */
-
-#define SARMODE1_TAGM       (0x1 <<  8)  /* Program to 0 */
-
-#define SARMODE1_HECM0      (0x1 <<  9)
-#define SARMODE1_HECM1      (0x1 << 10)
-#define SARMODE1_HECM2      (0x1 << 11)
-
-#define SARMODE1_GFCE       (0x1 << 14)
-#define SARMODE1_GFCR       (0x1 << 15)
-#define SARMODE1_PMS        (0x1 << 18)
-#define SARMODE1_GPRI       (0x1 << 19)
-#define SARMODE1_GPAS       (0x1 << 20)
-#define SARMODE1_GVAS       (0x1 << 21)
-#define SARMODE1_GNAM       (0x1 << 22)
-#define SARMODE1_GPLEN      (0x1 << 23)
-#define SARMODE1_DUMPE      (0x1 << 24)
-#define SARMODE1_OAMCRC     (0x1 << 25)
-#define SARMODE1_DCOAM      (0x1 << 26)
-#define SARMODE1_DCRM       (0x1 << 27)
-#define SARMODE1_TSTLP      (0x1 << 28)
-#define SARMODE1_DEFHEC     (0x1 << 29)
-
-
-#define ISR      0x64
-#define IUSR     0x68
-#define IMR      0x6c
-
-#define ISR_LPCO          (0x1 <<  0)
-#define ISR_DPCO          (0x1 <<  1)
-#define ISR_RBRQ0_W       (0x1 <<  2)
-#define ISR_RBRQ1_W       (0x1 <<  3)
-#define ISR_RBRQ2_W       (0x1 <<  4)
-#define ISR_RBRQ3_W       (0x1 <<  5)
-#define ISR_RBRQ0_NF      (0x1 <<  6)
-#define ISR_RBRQ1_NF      (0x1 <<  7)
-#define ISR_RBRQ2_NF      (0x1 <<  8)
-#define ISR_RBRQ3_NF      (0x1 <<  9)
-#define ISR_BFP_SC        (0x1 << 10)
-#define ISR_INIT          (0x1 << 11)
-#define ISR_INIT_ERR      (0x1 << 12) /* Documented as "reserved" */
-#define ISR_USCEO         (0x1 << 13)
-#define ISR_UPEC0         (0x1 << 14)
-#define ISR_VPFCO         (0x1 << 15)
-#define ISR_CRCCO         (0x1 << 16)
-#define ISR_HECO          (0x1 << 17)
-#define ISR_TBRQ_W        (0x1 << 18)
-#define ISR_TBRQ_NF       (0x1 << 19)
-#define ISR_CTPQ_E        (0x1 << 20)
-#define ISR_GFC_C0        (0x1 << 21)
-#define ISR_PCI_FTL       (0x1 << 22)
-#define ISR_CSQ_W         (0x1 << 23)
-#define ISR_CSQ_NF        (0x1 << 24)
-#define ISR_EXT_INT       (0x1 << 25)
-#define ISR_RXDMA_S       (0x1 << 26)
-
-
-#define TMCONF 0x78
-/* Bits? */
-
-
-#define CALPRESCALE 0x7c
-/* Bits? */
-
-#define CELLOSCONF 0x84
-#define CELLOSCONF_COTS   (0x1 << 28)
-#define CELLOSCONF_CEN    (0x1 << 27)
-#define CELLOSCONF_SC8    (0x3 << 24)
-#define CELLOSCONF_SC4    (0x2 << 24)
-#define CELLOSCONF_SC2    (0x1 << 24)
-#define CELLOSCONF_SC1    (0x0 << 24)
-
-#define CELLOSCONF_COBS   (0x1 << 16)
-#define CELLOSCONF_COPK   (0x1 <<  8)
-#define CELLOSCONF_COST   (0x1 <<  0)
-/* Bits? */
-
-#define RAS0 0x1bc
-#define RAS0_DCD_XHLT (0x1 << 31)
-
-#define RAS0_VPSEL    (0x1 << 16)
-#define RAS0_VCSEL    (0x1 <<  0)
-
-#define RAS1 0x1c0
-#define RAS1_UTREG    (0x1 << 5)
-
-
-#define DMAMR 0x1cc
-#define DMAMR_TX_MODE_FULL (0x0 << 0)
-#define DMAMR_TX_MODE_PART (0x1 << 0)
-#define DMAMR_TX_MODE_NONE (0x2 << 0) /* And 3 */
-
-
-
-#define RAS2 0x280
-
-#define RAS2_NNI  (0x1 << 0)
-#define RAS2_USEL (0x1 << 1)
-#define RAS2_UBS  (0x1 << 2)
-
-
-
-struct fs_transmit_config {
-	u32 flags;
-	u32 atm_hdr;
-	u32 TMC[4];
-	u32 spec;
-	u32 rtag[3];
-};
-
-#define TC_FLAGS_AAL5      (0x0 << 29)
-#define TC_FLAGS_TRANSPARENT_PAYLOAD (0x1 << 29)
-#define TC_FLAGS_TRANSPARENT_CELL    (0x2 << 29)
-#define TC_FLAGS_STREAMING (0x1 << 28)
-#define TC_FLAGS_PACKET    (0x0) 
-#define TC_FLAGS_TYPE_ABR  (0x0 << 22)
-#define TC_FLAGS_TYPE_CBR  (0x1 << 22)
-#define TC_FLAGS_TYPE_VBR  (0x2 << 22)
-#define TC_FLAGS_TYPE_UBR  (0x3 << 22)
-#define TC_FLAGS_CAL0      (0x0 << 20)
-#define TC_FLAGS_CAL1      (0x1 << 20)
-#define TC_FLAGS_CAL2      (0x2 << 20)
-#define TC_FLAGS_CAL3      (0x3 << 20)
-
-
-#define RC_FLAGS_NAM        (0x1 << 13)
-#define RC_FLAGS_RXBM_PSB   (0x0 << 14)
-#define RC_FLAGS_RXBM_CIF   (0x1 << 14)
-#define RC_FLAGS_RXBM_PMB   (0x2 << 14)
-#define RC_FLAGS_RXBM_STR   (0x4 << 14)
-#define RC_FLAGS_RXBM_SAF   (0x6 << 14)
-#define RC_FLAGS_RXBM_POS   (0x6 << 14)
-#define RC_FLAGS_BFPS       (0x1 << 17)
-
-#define RC_FLAGS_BFPS_BFP   (0x1 << 17)
-
-#define RC_FLAGS_BFPS_BFP0  (0x0 << 17)
-#define RC_FLAGS_BFPS_BFP1  (0x1 << 17)
-#define RC_FLAGS_BFPS_BFP2  (0x2 << 17)
-#define RC_FLAGS_BFPS_BFP3  (0x3 << 17)
-#define RC_FLAGS_BFPS_BFP4  (0x4 << 17)
-#define RC_FLAGS_BFPS_BFP5  (0x5 << 17)
-#define RC_FLAGS_BFPS_BFP6  (0x6 << 17)
-#define RC_FLAGS_BFPS_BFP7  (0x7 << 17)
-#define RC_FLAGS_BFPS_BFP01 (0x8 << 17)
-#define RC_FLAGS_BFPS_BFP23 (0x9 << 17)
-#define RC_FLAGS_BFPS_BFP45 (0xa << 17)
-#define RC_FLAGS_BFPS_BFP67 (0xb << 17)
-#define RC_FLAGS_BFPS_BFP07 (0xc << 17)
-#define RC_FLAGS_BFPS_BFP27 (0xd << 17)
-#define RC_FLAGS_BFPS_BFP47 (0xe << 17)
-
-#define RC_FLAGS_BFPP       (0x1 << 21)
-#define RC_FLAGS_TEVC       (0x1 << 22)
-#define RC_FLAGS_TEP        (0x1 << 23)
-#define RC_FLAGS_AAL5       (0x0 << 24)
-#define RC_FLAGS_TRANSP     (0x1 << 24)
-#define RC_FLAGS_TRANSC     (0x2 << 24)
-#define RC_FLAGS_ML         (0x1 << 27)
-#define RC_FLAGS_TRBRM      (0x1 << 28)
-#define RC_FLAGS_PRI        (0x1 << 29)
-#define RC_FLAGS_HOAM       (0x1 << 30)
-#define RC_FLAGS_CRC10      (0x1 << 31)
-
-
-#define RAC 0x1c8
-#define RAM 0x1c4
-
-
-
-/************************************************************************
- *         Then the datastructures that the DRIVER uses.                *
- ************************************************************************/
-
-#define TXQ_NENTRIES  32
-#define RXRQ_NENTRIES 1024
-
-
-struct fs_vcc {
-	int channo;
-	wait_queue_head_t close_wait;
-	struct sk_buff *last_skb;
-};
-
-
-struct queue {
-	struct FS_QENTRY *sa, *ea;  
-	int offset;
-};
-
-struct freepool {
-	int offset;
-	int bufsize;
-	int nr_buffers;
-	int n;
-};
-
-
-struct fs_dev {
-	struct fs_dev *next;		/* other FS devices */
-	int flags;
-
-	unsigned char irq;		/* IRQ */
-	struct pci_dev *pci_dev;	/* PCI stuff */
-	struct atm_dev *atm_dev;
-	struct timer_list timer;
-
-	unsigned long hw_base;		/* mem base address */
-	void __iomem *base;             /* Mapping of base address */
-	int channo;
-	unsigned long channel_mask;
-
-	struct queue    hp_txq, lp_txq, tx_relq, st_q;
-	struct freepool rx_fp[FS_NR_FREE_POOLS];
-	struct queue    rx_rq[FS_NR_RX_QUEUES];
-
-	int nchannels;
-	struct atm_vcc **atm_vccs;
-	void *tx_inuse;
-	int ntxpckts;
-};
-
-
-
-
-/* Number of channesl that the FS50 supports. */
-#define FS50_CHANNEL_BITS  5
-#define FS50_NR_CHANNELS      (1 << FS50_CHANNEL_BITS)
-
-         
-#define FS_DEV(atm_dev) ((struct fs_dev *) (atm_dev)->dev_data)
-#define FS_VCC(atm_vcc) ((struct fs_vcc *) (atm_vcc)->dev_data)
-
-
-#define FS_IS50  0x1
-#define FS_IS155 0x2
-
-#define IS_FS50(dev)  (dev->flags & FS_IS50)
-#define IS_FS155(dev) (dev->flags & FS_IS155)
- 
-/* Within limits this is user-configurable. */
-/* Note: Currently the sum (10 -> 1k channels) is hardcoded in the driver. */
-#define FS155_VPI_BITS 4
-#define FS155_VCI_BITS 6
-
-#define FS155_CHANNEL_BITS  (FS155_VPI_BITS + FS155_VCI_BITS)
-#define FS155_NR_CHANNELS   (1 << FS155_CHANNEL_BITS)