diff options
| author | Damien Le Moal <damien.lemoal@hgst.com> | 2016-04-04 12:17:09 -0400 |
|---|---|---|
| committer | Tejun Heo <tj@kernel.org> | 2016-04-04 12:17:09 -0400 |
| commit | 974e0a4537f556867483f493c7f67ccdcb7fc504 (patch) | |
| tree | 44ec7451b86d0778c7a2b4b4a7ba5eb558f6bf39 /drivers/ata | |
| parent | d991c872ac7ffaacc4df93efbfbcb4189cee6440 (diff) | |
libata-core: Allow longer timeout for drive spinup from PUIS
When spinning up a drive from powered on standby mode (PUIS),
SETFEATURES_SPINUP is executed with the default timeout used
for any SETFEATURES subcommand, that is 5+10 seconds. The
total 15s is too short for some drives to complete spinup
(e.g. drives with a large indirection table stored on media),
resulting in ata_dev_read_id to fail twice on the execution
of SETFEATURES_SPINUP. For this feature, allow a larger
default timeout of 30 seconds. However, in the same spirit
as with the timeout of other feature subcommands, do not
ignore ata_probe_timeout if it is set).
Signed-off-by: Damien Le Moal <damien.lemoal@hgst.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Diffstat (limited to 'drivers/ata')
| -rw-r--r-- | drivers/ata/libata-core.c | 6 |
1 files changed, 5 insertions, 1 deletions
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 55e257c268dd..7b21021dbf7d 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -4528,6 +4528,7 @@ unsigned int ata_dev_set_feature(struct ata_device *dev, u8 enable, u8 feature) { struct ata_taskfile tf; unsigned int err_mask; + unsigned long timeout = 0; /* set up set-features taskfile */ DPRINTK("set features - SATA features\n"); @@ -4539,7 +4540,10 @@ unsigned int ata_dev_set_feature(struct ata_device *dev, u8 enable, u8 feature) tf.protocol = ATA_PROT_NODATA; tf.nsect = feature; - err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0, 0); + if (enable == SETFEATURES_SPINUP) + timeout = ata_probe_timeout ? + ata_probe_timeout * 1000 : SETFEATURES_SPINUP_TIMEOUT; + err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0, timeout); DPRINTK("EXIT, err_mask=%x\n", err_mask); return err_mask; |