diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2020-08-05 12:13:10 -0700 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2020-08-05 12:13:10 -0700 |
commit | ecfd7940b8641da6e41ca94eba36876dc2ba827b (patch) | |
tree | b25d042366a3b6f165abb4c9fba9b9faf1ba33f6 /arch | |
parent | dd27111e32572fdd3aaae98ba2817df6d202357a (diff) | |
parent | e3ee0e740c3887d2293e8d54a8707218d70d86ca (diff) |
Merge tag 'usb-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB/Thunderbolt updates from Greg KH:
"Here is the large set of USB and Thunderbolt patches for 5.9-rc1.
Nothing really magic/major in here, just lots of little changes and
updates:
- clean up language usages in USB core and some drivers
- Thunderbolt driver updates and additions
- USB Gadget driver updates
- dwc3 driver updates (like always...)
- build with "W=1" warning fixups
- mtu3 driver updates
- usb-serial driver updates and device ids
- typec additions and updates for new hardware
- xhci debug code updates for future platforms
- cdns3 driver updates
- lots of other minor driver updates and fixes and cleanups
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (330 commits)
usb: common: usb-conn-gpio: Register charger
usb: mtu3: simplify mtu3_req_complete()
usb: mtu3: clear dual mode of u3port when disable device
usb: mtu3: use MTU3_EP_WEDGE flag
usb: mtu3: remove useless member @busy in mtu3_ep struct
usb: mtu3: remove repeated error log
usb: mtu3: add ->udc_set_speed()
usb: mtu3: introduce a funtion to check maximum speed
usb: mtu3: clear interrupts status when disable interrupts
usb: mtu3: reinitialize CSR registers
usb: mtu3: fix macro for maximum number of packets
usb: mtu3: remove unnecessary pointer checks
usb: xhci: Fix ASMedia ASM1142 DMA addressing
usb: xhci: define IDs for various ASMedia host controllers
usb: musb: convert to devm_platform_ioremap_resource_byname
usb: gadget: tegra-xudc: convert to devm_platform_ioremap_resource_byname
usb: gadget: r8a66597: convert to devm_platform_ioremap_resource_byname
usb: dwc3: convert to devm_platform_ioremap_resource_byname
usb: cdns3: convert to devm_platform_ioremap_resource_byname
usb: phy: am335x: convert to devm_platform_ioremap_resource_byname
...
Diffstat (limited to 'arch')
-rw-r--r-- | arch/arm/mach-omap1/board-osk.c | 17 | ||||
-rw-r--r-- | arch/mips/configs/fuloong2e_defconfig | 2 | ||||
-rw-r--r-- | arch/mips/configs/gcw0_defconfig | 2 | ||||
-rw-r--r-- | arch/mips/configs/lemote2f_defconfig | 2 |
4 files changed, 20 insertions, 3 deletions
diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c index 4df15e693b6e..144b9caa935c 100644 --- a/arch/arm/mach-omap1/board-osk.c +++ b/arch/arm/mach-omap1/board-osk.c @@ -26,6 +26,7 @@ * 675 Mass Ave, Cambridge, MA 02139, USA. */ #include <linux/gpio.h> +#include <linux/gpio/machine.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> @@ -55,6 +56,9 @@ #include "common.h" +/* Name of the GPIO chip used by the OMAP for GPIOs 0..15 */ +#define OMAP_GPIO_LABEL "gpio-0-15" + /* At OMAP5912 OSK the Ethernet is directly connected to CS1 */ #define OMAP_OSK_ETHR_START 0x04800300 @@ -240,7 +244,9 @@ static struct tps65010_board tps_board = { static struct i2c_board_info __initdata osk_i2c_board_info[] = { { + /* This device will get the name "i2c-tps65010" */ I2C_BOARD_INFO("tps65010", 0x48), + .dev_name = "tps65010", .platform_data = &tps_board, }, @@ -278,6 +284,16 @@ static void __init osk_init_cf(void) irq_set_irq_type(gpio_to_irq(62), IRQ_TYPE_EDGE_FALLING); } +static struct gpiod_lookup_table osk_usb_gpio_table = { + .dev_id = "ohci", + .table = { + /* Power GPIO on the I2C-attached TPS65010 */ + GPIO_LOOKUP("i2c-tps65010", 1, "power", GPIO_ACTIVE_HIGH), + GPIO_LOOKUP(OMAP_GPIO_LABEL, 9, "overcurrent", + GPIO_ACTIVE_HIGH), + }, +}; + static struct omap_usb_config osk_usb_config __initdata = { /* has usb host connector (A) ... for development it can also * be used, with a NONSTANDARD gender-bending cable/dongle, as @@ -581,6 +597,7 @@ static void __init osk_init(void) l |= (3 << 1); omap_writel(l, USB_TRANSCEIVER_CTRL); + gpiod_add_lookup_table(&osk_usb_gpio_table); omap1_usb_init(&osk_usb_config); /* irq for tps65010 chip */ diff --git a/arch/mips/configs/fuloong2e_defconfig b/arch/mips/configs/fuloong2e_defconfig index 6466e83067b4..023b4e644b1c 100644 --- a/arch/mips/configs/fuloong2e_defconfig +++ b/arch/mips/configs/fuloong2e_defconfig @@ -159,7 +159,7 @@ CONFIG_USB_KBD=y CONFIG_USB_MOUSE=y CONFIG_USB=y CONFIG_USB_ANNOUNCE_NEW_DEVICES=y -CONFIG_USB_OTG_WHITELIST=y +CONFIG_USB_OTG_PRODUCTLIST=y CONFIG_USB_WUSB_CBAF=m CONFIG_USB_C67X00_HCD=m CONFIG_USB_EHCI_HCD=y diff --git a/arch/mips/configs/gcw0_defconfig b/arch/mips/configs/gcw0_defconfig index 48131cb47e66..4994749b9eaa 100644 --- a/arch/mips/configs/gcw0_defconfig +++ b/arch/mips/configs/gcw0_defconfig @@ -96,7 +96,7 @@ CONFIG_SND_SIMPLE_CARD=y CONFIG_USB_CONN_GPIO=y CONFIG_USB=y CONFIG_USB_OTG=y -CONFIG_USB_OTG_BLACKLIST_HUB=y +CONFIG_USB_OTG_DISABLE_EXTERNAL_HUB=y CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_HCD_PLATFORM=y CONFIG_USB_MUSB_HDRC=y diff --git a/arch/mips/configs/lemote2f_defconfig b/arch/mips/configs/lemote2f_defconfig index 8254d7d1396f..3a9a453b1264 100644 --- a/arch/mips/configs/lemote2f_defconfig +++ b/arch/mips/configs/lemote2f_defconfig @@ -207,7 +207,7 @@ CONFIG_ZEROPLUS_FF=y CONFIG_USB_HIDDEV=y CONFIG_USB=y CONFIG_USB_DYNAMIC_MINORS=y -CONFIG_USB_OTG_WHITELIST=y +CONFIG_USB_OTG_PRODUCTLIST=y CONFIG_USB_MON=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_ROOT_HUB_TT=y |