diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2012-05-26 12:22:27 -0700 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2012-05-26 12:22:27 -0700 |
| commit | ce53044c68cf4fb6c50a2a0d88786be65fae7235 (patch) | |
| tree | 19c21da7d261412192e189ef3fd1a9ff4e7ba5c2 /arch | |
| parent | 0877aa3908aaeeae8fc2850691668c4315d3db56 (diff) | |
| parent | 046fae440d32cc6dec8148c7e06a8b4b987f8a2f (diff) | |
Merge tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull arm-soc driver specific updates from Olof Johansson:
"These changes are specific to some driver that may be used by multiple
boards or socs. The most significant change in here is the move of
the samsung iommu code from a platform specific in-kernel interface to
the generic iommu subsystem."
Fix up trivial conflicts in arch/arm/mach-exynos/Kconfig
* tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (28 commits)
mmc: dt: Consolidate DT bindings
iommu/exynos: Add iommu driver for EXYNOS Platforms
ARM: davinci: optimize the DMA ISR
ARM: davinci: implement DEBUG_LL port choice
ARM: tegra: Add SMMU enabler in AHB
ARM: tegra: Add Tegra AHB driver
Input: pxa27x_keypad add choice to set direct_key_mask
Input: pxa27x_keypad direct key may be low active
Input: pxa27x_keypad bug fix for direct_key_mask
Input: pxa27x_keypad keep clock on as wakeup source
ARM: dt: tegra: pinmux changes for USB ULPI
ARM: tegra: add USB ULPI PHY reset GPIO to device tree
ARM: tegra: don't hard-code USB ULPI PHY reset_gpio
ARM: tegra: change pll_p_out4's rate to 24MHz
ARM: tegra: fix pclk rate
ARM: tegra: reparent sclk to pll_c_out1
ARM: tegra: Add pllc clock init table
ARM: dt: tegra cardhu: basic audio support
ARM: dt: tegra30.dtsi: Add audio-related nodes
ARM: tegra: add AUXDATA required for audio
...
Diffstat (limited to 'arch')
54 files changed, 1042 insertions, 960 deletions
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index 85348a09d655..e561adc1db0c 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -103,6 +103,35 @@ choice Say Y here if you want the debug print routines to direct their output to the second serial port on these devices. + config DEBUG_DAVINCI_DA8XX_UART1 + bool "Kernel low-level debugging on DaVinci DA8XX using UART1" + depends on ARCH_DAVINCI_DA8XX + help + Say Y here if you want the debug print routines to direct + their output to UART1 serial port on DaVinci DA8XX devices. + + config DEBUG_DAVINCI_DA8XX_UART2 + bool "Kernel low-level debugging on DaVinci DA8XX using UART2" + depends on ARCH_DAVINCI_DA8XX + help + Say Y here if you want the debug print routines to direct + their output to UART2 serial port on DaVinci DA8XX devices. + + config DEBUG_DAVINCI_DMx_UART0 + bool "Kernel low-level debugging on DaVinci DMx using UART0" + depends on ARCH_DAVINCI_DMx + help + Say Y here if you want the debug print routines to direct + their output to UART0 serial port on DaVinci DMx devices. + + config DEBUG_DAVINCI_TNETV107X_UART1 + bool "Kernel low-level debugging on DaVinci TNETV107x using UART1" + depends on ARCH_DAVINCI_TNETV107X + help + Say Y here if you want the debug print routines to direct + their output to UART1 serial port on DaVinci TNETV107X + devices. + config DEBUG_DC21285_PORT bool "Kernel low-level debugging messages via footbridge serial port" depends on FOOTBRIDGE diff --git a/arch/arm/boot/dts/imx53-smd.dts b/arch/arm/boot/dts/imx53-smd.dts index c7ee86c2dfb5..139138a556b0 100644 --- a/arch/arm/boot/dts/imx53-smd.dts +++ b/arch/arm/boot/dts/imx53-smd.dts @@ -35,7 +35,7 @@ }; esdhc@50008000 { /* ESDHC2 */ - fsl,card-wired; + non-removable; status = "okay"; }; @@ -76,7 +76,7 @@ }; esdhc@50020000 { /* ESDHC3 */ - fsl,card-wired; + non-removable; status = "okay"; }; }; diff --git a/arch/arm/boot/dts/imx6q-arm2.dts b/arch/arm/boot/dts/imx6q-arm2.dts index ce1c8238c897..d2eaf521c9fd 100644 --- a/arch/arm/boot/dts/imx6q-arm2.dts +++ b/arch/arm/boot/dts/imx6q-arm2.dts @@ -41,7 +41,7 @@ }; usdhc@0219c000 { /* uSDHC4 */ - fsl,card-wired; + non-removable; vmmc-supply = <®_3p3v>; status = "okay"; }; diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts index 8c756be4d7ad..5b4506c0a8c4 100644 --- a/arch/arm/boot/dts/omap3-beagle.dts +++ b/arch/arm/boot/dts/omap3-beagle.dts @@ -57,7 +57,7 @@ &mmc1 { vmmc-supply = <&vmmc1>; vmmc_aux-supply = <&vsim>; - ti,bus-width = <8>; + bus-width = <8>; }; &mmc2 { diff --git a/arch/arm/boot/dts/omap4-panda.dts b/arch/arm/boot/dts/omap4-panda.dts index e671361bc791..1efe0c587985 100644 --- a/arch/arm/boot/dts/omap4-panda.dts +++ b/arch/arm/boot/dts/omap4-panda.dts @@ -70,7 +70,7 @@ &mmc1 { vmmc-supply = <&vmmc>; - ti,bus-width = <8>; + bus-width = <8>; }; &mmc2 { @@ -87,5 +87,5 @@ &mmc5 { ti,non-removable; - ti,bus-width = <4>; + bus-width = <4>; }; diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts index e5eeb6f9c6e6..d08c4d137280 100644 --- a/arch/arm/boot/dts/omap4-sdp.dts +++ b/arch/arm/boot/dts/omap4-sdp.dts @@ -137,12 +137,12 @@ &mmc1 { vmmc-supply = <&vmmc>; - ti,bus-width = <8>; + bus-width = <8>; }; &mmc2 { vmmc-supply = <&vaux1>; - ti,bus-width = <8>; + bus-width = <8>; ti,non-removable; }; @@ -155,6 +155,6 @@ }; &mmc5 { - ti,bus-width = <4>; + bus-width = <4>; ti,non-removable; }; diff --git a/arch/arm/boot/dts/tegra-cardhu.dts b/arch/arm/boot/dts/tegra-cardhu.dts index 0a9f34a2c3aa..4a166357172b 100644 --- a/arch/arm/boot/dts/tegra-cardhu.dts +++ b/arch/arm/boot/dts/tegra-cardhu.dts @@ -51,6 +51,15 @@ nvidia,pull = <2>; nvidia,tristate = <0>; }; + dap2_fs_pa2 { + nvidia,pins = "dap2_fs_pa2", + "dap2_sclk_pa3", + "dap2_din_pa4", + "dap2_dout_pa5"; + nvidia,function = "i2s1"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + }; }; }; @@ -92,12 +101,27 @@ i2c@7000d000 { clock-frequency = <100000>; + + wm8903: wm8903@1a { + compatible = "wlf,wm8903"; + reg = <0x1a>; + interrupt-parent = <&gpio>; + interrupts = <179 0x04>; /* gpio PW3 */ + + gpio-controller; + #gpio-cells = <2>; + + micdet-cfg = <0>; + micdet-delay = <100>; + gpio-cfg = <0xffffffff 0xffffffff 0 0xffffffff 0xffffffff>; + }; }; sdhci@78000000 { cd-gpios = <&gpio 69 0>; /* gpio PI5 */ wp-gpios = <&gpio 155 0>; /* gpio PT3 */ power-gpios = <&gpio 31 0>; /* gpio PD7 */ + bus-width = <4>; }; sdhci@78000200 { @@ -110,5 +134,46 @@ sdhci@78000400 { support-8bit; + bus-width = <8>; + }; + + ahub@70080000 { + i2s@70080300 { + status = "disable"; + }; + + i2s@70080500 { + status = "disable"; + }; + + i2s@70080600 { + status = "disable"; + }; + + i2s@70080700 { + status = "disable"; + }; + }; + + sound { + compatible = "nvidia,tegra-audio-wm8903-cardhu", + "nvidia,tegra-audio-wm8903"; + nvidia,model = "NVIDIA Tegra Cardhu"; + + nvidia,audio-routing = + "Headphone Jack", "HPOUTR", + "Headphone Jack", "HPOUTL", + "Int Spk", "ROP", + "Int Spk", "RON", + "Int Spk", "LOP", + "Int Spk", "LON", + "Mic Jack", "MICBIAS", + "IN1L", "Mic Jack"; + + nvidia,i2s-controller = <&tegra_i2s1>; + nvidia,audio-codec = <&wm8903>; + + nvidia,spkr-en-gpios = <&wm8903 2 0>; + nvidia,hp-det-gpios = <&gpio 178 0>; /* gpio PW2 */ }; }; diff --git a/arch/arm/boot/dts/tegra-harmony.dts b/arch/arm/boot/dts/tegra-harmony.dts index 1a0b1f182944..7cd513ac5ea6 100644 --- a/arch/arm/boot/dts/tegra-harmony.dts +++ b/arch/arm/boot/dts/tegra-harmony.dts @@ -167,28 +167,28 @@ }; conf_ata { nvidia,pins = "ata", "atb", "atc", "atd", "ate", - "cdev1", "dap1", "dtb", "gma", "gmb", - "gmc", "gmd", "gme", "gpu7", "gpv", - "i2cp", "pta", "rm", "slxa", "slxk", - "spia", "spib"; + "cdev1", "cdev2", "dap1", "dtb", "gma", + "gmb", "gmc", "gmd", "gme", "gpu7", + "gpv", "i2cp", "pta", "rm", "slxa", + "slxk", "spia", "spib", "uac"; nvidia,pull = <0>; nvidia,tristate = <0>; }; - conf_cdev2 { - nvidia,pins = "cdev2", "csus", "spid", "spif"; - nvidia,pull = <1>; - nvidia,tristate = <1>; - }; conf_ck32 { nvidia,pins = "ck32", "ddrc", "pmca", "pmcb", "pmcc", "pmcd", "pmce", "xm2c", "xm2d"; nvidia,pull = <0>; }; + conf_csus { + nvidia,pins = "csus", "spid", "spif"; + nvidia,pull = <1>; + nvidia,tristate = <1>; + }; conf_crtp { nvidia,pins = "crtp", "dap2", "dap3", "dap4", "dtc", "dte", "dtf", "gpu", "sdio1", "slxc", "slxd", "spdi", "spdo", "spig", - "uac", "uda"; + "uda"; nvidia,pull = <0>; nvidia,tristate = <1>; }; @@ -324,6 +324,7 @@ cd-gpios = <&gpio 69 0>; /* gpio PI5 */ wp-gpios = <&gpio 57 0>; /* gpio PH1 */ power-gpios = <&gpio 155 0>; /* gpio PT3 */ + bus-width = <4>; }; sdhci@c8000400 { @@ -335,5 +336,10 @@ wp-gpios = <&gpio 59 0>; /* gpio PH3 */ power-gpios = <&gpio 70 0>; /* gpio PI6 */ support-8bit; + bus-width = <8>; + }; + + usb@c5004000 { + nvidia,phy-reset-gpio = <&gpio 169 0>; /* gpio PV1 */ }; }; diff --git a/arch/arm/boot/dts/tegra-paz00.dts b/arch/arm/boot/dts/tegra-paz00.dts index 10943fb2561c..8d625e4c5de5 100644 --- a/arch/arm/boot/dts/tegra-paz00.dts +++ b/arch/arm/boot/dts/tegra-paz00.dts @@ -159,18 +159,14 @@ }; conf_ata { nvidia,pins = "ata", "atb", "atc", "atd", "ate", - "cdev1", "dap1", "dap2", "dtf", "gma", - "gmb", "gmc", "gmd", "gme", "gpu", - "gpu7", "gpv", "i2cp", "pta", "rm", - "sdio1", "slxk", "spdo", "uac", "uda"; + "cdev1", "cdev2", "dap1", "dap2", "dtf", + "gma", "gmb", "gmc", "gmd", "gme", + "gpu", "gpu7", "gpv", "i2cp", "pta", + "rm", "sdio1", "slxk", "spdo", "uac", + "uda"; nvidia,pull = <0>; nvidia,tristate = <0>; }; - conf_cdev2 { - nvidia,pins = "cdev2"; - nvidia,pull = <1>; - nvidia,tristate = <0>; - }; conf_ck32 { nvidia,pins = "ck32", "ddrc", "pmca", "pmcb", "pmcc", "pmcd", "pmce", "xm2c", "xm2d"; @@ -317,6 +313,7 @@ cd-gpios = <&gpio 173 0>; /* gpio PV5 */ wp-gpios = <&gpio 57 0>; /* gpio PH1 */ power-gpios = <&gpio 169 0>; /* gpio PV1 */ + bus-width = <4>; }; sdhci@c8000200 { @@ -329,6 +326,7 @@ sdhci@c8000600 { support-8bit; + bus-width = <8>; }; gpio-keys { @@ -351,4 +349,8 @@ linux,default-trigger = "rfkill0"; }; }; + + usb@c5004000 { + nvidia,phy-reset-gpio = <&gpio 168 0>; /* gpio PV0 */ + }; }; diff --git a/arch/arm/boot/dts/tegra-seaboard.dts b/arch/arm/boot/dts/tegra-seaboard.dts index ec33116f5df9..315971993cfd 100644 --- a/arch/arm/boot/dts/tegra-seaboard.dts +++ b/arch/arm/boot/dts/tegra-seaboard.dts @@ -347,10 +347,12 @@ cd-gpios = <&gpio 69 0>; /* gpio PI5 */ wp-gpios = <&gpio 57 0>; /* gpio PH1 */ power-gpios = <&gpio 70 0>; /* gpio PI6 */ + bus-width = <4>; }; sdhci@c8000600 { support-8bit; + bus-width = <8>; }; usb@c5000000 { @@ -415,4 +417,8 @@ 0x00000000 0x00000000 0x00000000 0x00000000 >; }; }; + + usb@c5004000 { + nvidia,phy-reset-gpio = <&gpio 169 0>; /* gpio PV1 */ + }; }; diff --git a/arch/arm/boot/dts/tegra-trimslice.dts b/arch/arm/boot/dts/tegra-trimslice.dts index 98efd5b0d7f9..e4fcf9a8178a 100644 --- a/arch/arm/boot/dts/tegra-trimslice.dts +++ b/arch/arm/boot/dts/tegra-trimslice.dts @@ -182,23 +182,23 @@ nvidia,tristate = <1>; }; conf_atb { - nvidia,pins = "atb", "cdev1", "dap1", "gma", - "gmc", "gmd", "gpu", "gpu7", "gpv", - "sdio1", "slxa", "slxk", "uac"; + nvidia,pins = "atb", "cdev1", "cdev2", "dap1", + "gma", "gmc", "gmd", "gpu", "gpu7", + "gpv", "sdio1", "slxa", "slxk", "uac"; nvidia,pull = <0>; nvidia,tristate = <0>; }; - conf_cdev2 { - nvidia,pins = "cdev2", "csus", "spia", "spib", - "spid", "spif"; - nvidia,pull = <1>; - nvidia,tristate = <1>; - }; conf_ck32 { nvidia,pins = "ck32", "ddrc", "pmca", "pmcb", "pmcc", "pmcd", "pmce", "xm2c", "xm2d"; nvidia,pull = <0>; }; + conf_csus { + nvidia,pins = "csus", "spia", "spib", + "spid", "spif"; + nvidia,pull = <1>; + nvidia,tristate = <1>; + }; conf_ddc { nvidia,pins = "ddc", "dtf", "rm", "sdc", "sdd"; nvidia,pull = <2>; @@ -304,4 +304,8 @@ cd-gpios = <&gpio 121 0>; wp-gpios = <&gpio 122 0>; }; + + usb@c5004000 { + nvidia,phy-reset-gpio = <&gpio 168 0>; /* gpio PV0 */ + }; }; diff --git a/arch/arm/boot/dts/tegra-ventana.dts b/arch/arm/boot/dts/tegra-ventana.dts index 71eb2e50a668..b922a26747e7 100644 --- a/arch/arm/boot/dts/tegra-ventana.dts +++ b/arch/arm/boot/dts/tegra-ventana.dts @@ -330,9 +330,15 @@ cd-gpios = <&gpio 69 0>; /* gpio PI5 */ wp-gpios = <&gpio 57 0>; /* gpio PH1 */ power-gpios = <&gpio 70 0>; /* gpio PI6 */ + bus-width = <4>; }; sdhci@c8000600 { support-8bit; + bus-width = <8>; + }; + + usb@c5004000 { + nvidia,phy-reset-gpio = <&gpio 169 0>; /* gpio PV1 */ }; }; diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi index 62a7b39f1c9a..15200a949a81 100644 --- a/arch/arm/boot/dts/tegra30.dtsi +++ b/arch/arm/boot/dts/tegra30.dtsi @@ -183,4 +183,45 @@ reg = < 0x70000868 0xd0 /* Pad control registers */ 0x70003000 0x3e0 >; /* Mux registers */ }; + + ahub { + compatible = "nvidia,tegra30-ahub"; + reg = <0x70080000 0x200 0x70080200 0x100>; + interrupts = < 0 103 0x04 >; + nvidia,dma-request-selector = <&apbdma 1>; + + ranges; + #address-cells = <1>; + #size-cells = <1>; + + tegra_i2s0: i2s@70080300 { + compatible = "nvidia,tegra30-i2s"; + reg = <0x70080300 0x100>; + nvidia,ahub-cif-ids = <4 4>; + }; + + tegra_i2s1: i2s@70080400 { + compatible = "nvidia,tegra30-i2s"; + reg = <0x70080400 0x100>; + nvidia,ahub-cif-ids = <5 5>; + }; + + tegra_i2s2: i2s@70080500 { + compatible = "nvidia,tegra30-i2s"; + reg = <0x70080500 0x100>; + nvidia,ahub-cif-ids = <6 6>; + }; + + tegra_i2s3: i2s@70080600 { + compatible = "nvidia,tegra30-i2s"; + reg = <0x70080600 0x100>; + nvidia,ahub-cif-ids = <7 7>; + }; + + tegra_i2s4: i2s@70080700 { + compatible = "nvidia,tegra30-i2s"; + reg = <0x70080700 0x100>; + nvidia,ahub-cif-ids = <8 8>; + }; + }; }; diff --git a/arch/arm/mach-davinci/dma.c b/arch/arm/mach-davinci/dma.c index 95ce019c9b98..a685e9706b7b 100644 --- a/arch/arm/mach-davinci/dma.c +++ b/arch/arm/mach-davinci/dma.c @@ -353,9 +353,10 @@ static int irq2ctlr(int irq) *****************************************************************************/ static irqreturn_t dma_irq_handler(int irq, void *data) { - int i; int ctlr; - unsigned int cnt = 0; + u32 sh_ier; + u32 sh_ipr; + u32 bank; ctlr = irq2ctlr(irq); if (ctlr < 0) @@ -363,41 +364,39 @@ static irqreturn_t dma_irq_handler(int irq, void *data) dev_dbg(data, "dma_irq_handler\n"); - if ((edma_shadow0_read_array(ctlr, SH_IPR, 0) == 0) && - (edma_shadow0_read_array(ctlr, SH_IPR, 1) == 0)) - return IRQ_NONE; + sh_ipr = edma_shadow0_read_array(ctlr, SH_IPR, 0); + if (!sh_ipr) { + sh_ipr = edma_shadow0_read_array(ctlr, SH_IPR, 1); + if (!sh_ipr) + return IRQ_NONE; + sh_ier = edma_shadow0_read_array(ctlr, SH_IER, 1); + bank = 1; + } else { + sh_ier = edma_shadow0_read_array(ctlr, SH_IER, 0); + bank = 0; + } - while (1) { - int j; - if (edma_shadow0_read_array(ctlr, SH_IPR, 0) & - edma_shadow0_read_array(ctlr, SH_IER, 0)) - j = 0; - else if (edma_shadow0_read_array(ctlr, SH_IPR, 1) & - edma_shadow0_read_array(ctlr, SH_IER, 1)) - j = 1; - else - break; - dev_dbg(data, "IPR%d %08x\n", j, - edma_shadow0_read_array(ctlr, SH_IPR, j)); - for (i = 0; i < 32; i++) { - int k = (j << 5) + i; - if ((edma_shadow0_read_array(ctlr, SH_IPR, j) & BIT(i)) - && (edma_shadow0_read_array(ctlr, - SH_IER, j) & BIT(i))) { - /* Clear the corresponding IPR bits */ - edma_shadow0_write_array(ctlr, SH_ICR, j, - BIT(i)); - if (edma_cc[ctlr]->intr_data[k].callback) - edma_cc[ctlr]->intr_data[k].callback( - k, DMA_COMPLETE, - edma_cc[ctlr]->intr_data[k]. - data); - } + do { + u32 slot; + u32 channel; + + dev_dbg(data, "IPR%d %08x\n", bank, sh_ipr); + + slot = __ffs(sh_ipr); + sh_ipr &= ~(BIT(slot)); + + if (sh_ier & BIT(slot)) { + channel = (bank << 5) | slot; + /* Clear the corresponding IPR bits */ + edma_shadow0_write_array(ctlr, SH_ICR, bank, + BIT(slot)); + if (edma_cc[ctlr]->intr_data[channel].callback) + edma_cc[ctlr]->intr_data[channel].callback( + channel, DMA_COMPLETE, + edma_cc[ctlr]->intr_data[channel].data); } - cnt++; - if (cnt > 10) - break; - } + } while (sh_ipr); + edma_shadow0_write(ctlr, SH_IEVAL, 1); return IRQ_HANDLED; } diff --git a/arch/arm/mach-davinci/include/mach/debug-macro.S b/arch/arm/mach-davinci/include/mach/debug-macro.S index cf94552d5274..34290d14754b 100644 --- a/arch/arm/mach-davinci/include/mach/debug-macro.S +++ b/arch/arm/mach-davinci/include/mach/debug-macro.S @@ -22,46 +22,28 @@ #define UART_SHIFT 2 - .pushsection .data -davinci_uart_phys: .word 0 -davinci_uart_virt: .word 0 - .popsection - - .macro addruart, rp, rv, tmp - - /* Use davinci_uart_phys/virt if already configured */ -10: adr \rp, 99f @ get effective addr of 99f - ldr \rv, [\rp] @ get absolute addr of 99f - sub \rv, \rv, \rp @ offset between the two - ldr \rp, [\rp, #4] @ abs addr of omap_uart_phys - sub \tmp, \rp, \rv @ make it effective - ldr \rp, [\tmp, #0] @ davinci_uart_phys - ldr \rv, [\tmp, #4] @ davinci_uart_virt - cmp \rp, #0 @ is port configured? - cmpne \rv, #0 - bne 100f @ already configured - - /* Check the debug UART address set in uncompress.h */ - and \rp, pc, #0xff000000 - ldr \rv, =DAVINCI_UART_INFO_OFS - add \rp, \rp, \rv - - /* Copy uart phys address from decompressor uart info */ - ldr \rv, [\rp, #0] - str \rv, [\tmp, #0] - - /* Copy uart virt address from decompressor uart info */ - ldr \rv, [\rp, #4] - str \rv, [\tmp, #4] - - b 10b +#if defined(CONFIG_DEBUG_DAVINCI_DMx_UART0) +#define UART_BASE DAVINCI_UART0_BASE +#elif defined(CONFIG_DEBUG_DAVINCI_DA8XX_UART0) +#define UART_BASE DA8XX_UART0_BASE +#elif defined(CONFIG_DEBUG_DAVINCI_DA8XX_UART1) +#define UART_BASE DA8XX_UART1_BASE +#elif defined(CONFIG_DEBUG_DAVINCI_DA8XX_UART2) +#define UART_BASE DA8XX_UART2_BASE +#elif defined(CONFIG_DEBUG_DAVINCI_TNETV107X_UART1) +#define UART_BASE TNETV107X_UART2_BASE +#define UART_VIRTBASE TNETV107X_UART2_VIRT +#else +#error "Select a specifc port for DEBUG_LL" +#endif - .align -99: .word . - .word davinci_uart_phys - .ltorg +#ifndef UART_VIRTBASE +#define UART_VIRTBASE IO_ADDRESS(UART_BASE) +#endif -100: + .macro addruart, rp, rv, tmp + ldr \rp, =UART_BASE + ldr \rv, =UART_VIRTBASE .endm .macro senduart,rd,rx diff --git a/arch/arm/mach-davinci/include/mach/hardware.h b/arch/arm/mach-davinci/include/mach/hardware.h index 2184691ebc2f..16bb42291d39 100644 --- a/arch/arm/mach-davinci/include/mach/hardware.h +++ b/arch/arm/mach-davinci/include/mach/hardware.h @@ -22,7 +22,7 @@ /* * I/O mapping */ -#define IO_PHYS 0x01c00000UL +#define IO_PHYS UL(0x01c00000) #define IO_OFFSET 0xfd000000 /* Virtual IO = 0xfec00000 */ #define IO_SIZE 0x00400000 #define IO_VIRT (IO_PHYS + IO_OFFSET) diff --git a/arch/arm/mach-davinci/include/mach/serial.h b/arch/arm/mach-davinci/include/mach/serial.h index e347d88fef91..46b3cd11c3c2 100644 --- a/arch/arm/mach-davinci/include/mach/serial.h +++ b/arch/arm/mach-davinci/include/mach/serial.h @@ -15,16 +15,6 @@ #include <mach/hardware.h> -/* - * Stolen area that contains debug uart physical and virtual addresses. These - * addresses are filled in by the uncompress.h code, and are used by the debug - * macros in debug-macro.S. - * - * This area sits just below the page tables (see arch/arm/kernel/head.S). - * We define it as a relative offset from start of usable RAM. - */ -#define DAVINCI_UART_INFO_OFS 0x3ff8 - #define DAVINCI_UART0_BASE (IO_PHYS + 0x20000) #define DAVINCI_UART1_BASE (IO_PHYS + 0x20400) #define DAVINCI_UART2_BASE (IO_PHYS + 0x20800) diff --git a/arch/arm/mach-davinci/include/mach/uncompress.h b/arch/arm/mach-davinci/include/mach/uncompress.h index da2fb2c2155a..18cfd4977155 100644 --- a/arch/arm/mach-davinci/include/mach/uncompress.h +++ b/arch/arm/mach-davinci/include/mach/uncompress.h @@ -43,37 +43,27 @@ static inline void flush(void) barrier(); } -static inline void set_uart_info(u32 phys, void * __iomem virt) +static inline void set_uart_info(u32 phys) { - /* - * Get address of some.bss variable and round it down - * a la CONFIG_AUTO_ZRELADDR. - */ - u32 ram_start = (u32)&uart & 0xf8000000; - u32 *uart_info = (u32 *)(ram_start + DAVINCI_UART_INFO_OFS); - uart = (u32 *)phys; - uart_info[0] = phys; - uart_info[1] = (u32)virt; } -#define _DEBUG_LL_ENTRY(machine, phys, virt) \ - if (machine_is_##machine()) { \ - set_uart_info(phys, virt); \ - break; \ +#define _DEBUG_LL_ENTRY(machine, phys) \ + { \ + if (machine_is_##machine()) { \ + set_uart_info(phys); \ + break; \ + } \ } #define DEBUG_LL_DAVINCI(machine, port) \ - _DEBUG_LL_ENTRY(machine, DAVINCI_UART##port##_BASE, \ - IO_ADDRESS(DAVINCI_UART##port##_BASE)) + _DEBUG_LL_ENTRY(machine, DAVINCI_UART##port##_BASE) #define DEBUG_LL_DA8XX(machine, port) \ - _DEBUG_LL_ENTRY(machine, DA8XX_UART##port##_BASE, \ - IO_ADDRESS(DA8XX_UART##port##_BASE)) + _DEBUG_LL_ENTRY(machine, DA8XX_UART##port##_BASE) #define DEBUG_LL_TNETV107X(machine, port) \ - _DEBUG_LL_ENTRY(machine, TNETV107X_UART##port##_BASE, \ - TNETV107X_UART##port##_VIRT) + _DEBUG_LL_ENTRY(machine, TNETV107X_UART##port##_BASE) static inline void __arch_decomp_setup(unsigned long arch_id) { diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c index 66b1494f23a6..ad1a91ab6acd 100644 --- a/arch/arm/mach-ep93xx/core.c +++ b/arch/arm/mach-ep93xx/core.c @@ -675,7 +675,7 @@ int ep93xx_keypad_acquire_gpio(struct platform_device *pdev) fail_gpio_d: gpio_free(EP93XX_GPIO_LINE_C(i)); fail_gpio_c: - for ( ; i >= 0; --i) { + for (--i; i >= 0; --i) { gpio_free(EP93XX_GPIO_LINE_C(i)); gpio_free(EP93XX_GPIO_LINE_D(i)); } diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig index 15b05b89cc39..e3cfd5fd7dd5 100644 --- a/arch/arm/mach-exynos/Kconfig +++ b/arch/arm/mach-exynos/Kconfig @@ -85,10 +85,10 @@ config EXYNOS4_SETUP_FIMD0 help Common setup code for FIMD0. -config EXYNOS4_DEV_SYSMMU +config EXYNOS_DEV_SYSMMU bool help - Common setup code for SYSTEM MMU in EXYNOS4 + Common setup code for SYSTEM MMU in EXYNOS platforms config EXYNOS4_DEV_DWMCI bool @@ -201,12 +201,12 @@ config MACH_SMDKV310 select S3C_DEV_HSMMC3 select SAMSUNG_DEV_BACKLIGHT select EXYNOS_DEV_DRM + select EXYNOS_DEV_SYSMMU select EXYNOS4_DEV_AHCI select SAMSUNG_DEV_KEYPAD select EXYNOS4_DEV_DMA select SAMSUNG_DEV_PWM select EXYNOS4_DEV_USB_OHCI - select EXYNOS4_DEV_SYSMMU select EXYNOS4_SETUP_FIMD0 select EXYNOS4_SETUP_I2C1 select EXYNOS4_SETUP_KEYPAD @@ -225,7 +225,6 @@ config MACH_ARMLEX4210 select S3C_DEV_HSMMC3 select EXYNOS4_DEV_AHCI select EXYNOS4_DEV_DMA - select EXYNOS4_DEV_SYSMMU select EXYNOS4_SETUP_SDHCI help Machine support for Samsung ARMLEX4210 based on EXYNOS4210 @@ -256,6 +255,7 @@ config MACH_UNIVERSAL_C210 select S5P_DEV_MFC select S5P_DEV_ONENAND select S5P_DEV_TV + select EXYNOS_DEV_SYSMMU select EXYNOS4_DEV_DMA select EXYNOS_DEV_DRM select EXYNOS4_SETUP_FIMD0 @@ -332,6 +332,7 @@ config MACH_ORIGEN select SAMSUNG_DEV_BACKLIGHT select SAMSUNG_DEV_PWM select EXYNOS_DEV_DRM + select EXYNOS_DEV_SYSMMU select EXYNOS4_DEV_DMA select EXYNOS4_DEV_USB_OHCI select EXYNOS4_SETUP_FIMD0 @@ -360,6 +361,7 @@ config MACH_SMDK4212 select SAMSUNG_DEV_BACKLIGHT select SAMSUNG_DEV_KEYPAD select SAMSUNG_DEV_PWM + select EXYNOS_DEV_SYSMMU select EXYNOS4_DEV_DMA select EXYNOS4_SETUP_I2C1 select EXYNOS4_SETUP_I2C3 diff --git a/arch/arm/mach-exynos/Makefile b/arch/arm/mach-exynos/Makefile index 8631840d1b5e..272625231c73 100644 --- a/arch/arm/mach-exynos/Makefile +++ b/arch/arm/mach-exynos/Makefile @@ -50,7 +50,7 @@ obj-$(CONFIG_MACH_EXYNOS5_DT) += mach-exynos5-dt.o obj-y += dev-uart.o obj-$(CONFIG_ARCH_EXYNOS4) += dev-audio.o obj-$(CONFIG_EXYNOS4_DEV_AHCI) += dev-ahci.o -obj-$(CONFIG_EXYNOS4_DEV_SYSMMU) += dev-sysmmu.o +obj-$(CONFIG_EXYNOS_DEV_SYSMMU) += dev-sysmmu.o obj-$(CONFIG_EXYNOS4_DEV_DWMCI) += dev-dwmci.o obj-$(CONFIG_EXYNOS4_DEV_DMA) += dma.o obj-$(CONFIG_EXYNOS4_DEV_USB_OHCI) += dev-ohci.o diff --git a/arch/arm/mach-exynos/clock-exynos4.c b/arch/arm/mach-exynos/clock-exynos4.c index 6efd1e5919fd..bcb7db453145 100644 --- a/arch/arm/mach-exynos/clock-exynos4.c +++ b/arch/arm/mach-exynos/clock-exynos4.c @@ -168,7 +168,7 @@ static int exynos4_clk_ip_tv_ctrl(struct clk *clk, int enable) return s5p_gatectrl(EXYNOS4_CLKGATE_IP_TV, clk, enable); } -static int exynos4_clk_ip_image_ctrl(struct clk *clk, int enable) +int exynos4_clk_ip_image_ctrl(struct clk *clk, int enable) { return s5p_gatectrl(EXYNOS4_CLKGATE_IP_IMAGE, clk, enable); } @@ -198,6 +198,11 @@ static int exynos4_clk_ip_perir_ctrl(struct clk *clk, int enable) return s5p_gatectrl(EXYNOS4_CLKGATE_IP_PERIR, clk, enable); } +int exynos4_clk_ip_dmc_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(EXYNOS4_CLKGATE_IP_DMC, clk, enable); +} + static int exynos4_clk_hdmiphy_ctrl(struct clk *clk, int enable) { return s5p_gatectrl(S5P_HDMI_PHY_CONTROL, clk, enable); @@ -678,61 +683,55 @@ static struct clk exynos4_init_clocks_off[] = { .enable = exynos4_clk_ip_peril_ctrl, .ctrlbit = (1 << 14), }, { - .name = "SYSMMU_MDMA", + .name = SYSMMU_CLOCK_NAME, + .devname = SYSMMU_CLOCK_DEVNAME(mfc_l, 0), + .enable = exynos4_clk_ip_mfc_ctrl, + .ctrlbit = (1 << 1), + }, { + .name = SYSMMU_CLOCK_NAME, + .devname = SYSMMU_CLOCK_DEVNAME(mfc_r, 1), + .enable = exynos4_clk_ip_mfc_ctrl, + .ctrlbit = (1 << 2), + }, { + .name = SYSMMU_CLOCK_NAME, + .devname = SYSMMU_CLOCK_DEVNAME(tv, 2), + .enable = exynos4_clk_ip_tv_ctrl, + .ctrlbit = (1 << 4), + }, { + .name = SYSMMU_CLOCK_NAME, + .devname = SYSMMU_CLOCK_DEVNAME(jpeg, 3), + .enable = exynos4_clk_ip_cam_ctrl, + .ctrlbit = (1 << 11), + }, { + .name = SYSMMU_CLOCK_NAME, + .devname = SYSMMU_CLOCK_DEVNAME(rot, 4), .enable = exynos4_clk_ip_image_ctrl, - .ctrlbit = (1 << 5), + .ctrlbit = (1 << 4), }, { - .name = "SYSMMU_FIMC0", + .name = SYSMMU_CLOCK_NAME, + .devname = SYSMMU_CLOCK_DEVNAME(fimc0, 5), .enable = exynos4_clk_ip_cam_ctrl, .ctrlbit = (1 << 7), }, { - .name = "SYSMMU_FIMC1", + .name = SYSMMU_CLOCK_NAME, + .devname = SYSMMU_CLOCK_DEVNAME(fimc1, 6), .enable = exynos4_clk_ip_cam_ctrl, .ctrlbit = (1 << 8), }, { - .name = "SYSMMU_FIMC2", + .name = SYSMMU_CLOCK_NAME, + .devname = SYSMMU_CLOCK_DEVNAME(fimc2, 7), .enable = exynos4_clk_ip_cam_ctrl, .ctrlbit = (1 << 9), }, { - .name = "SYSMMU_FIMC3", + .name = SYSMMU_CLOCK_NAME, + .devname = SYSMMU_CLOCK_DEVNAME(fimc3, 8), .enable = exynos4_clk_ip_cam_ctrl, .ctrlbit = (1 << 10), }, { - .name = "SYSMMU_JPEG", - .enable = exynos4_clk_ip_cam_ctrl, - .ctrlbit = (1 << 11), - }, { - .name = "SYSMMU_FIMD0", + .name = SYSMMU_CLOCK_NAME, + .devname = SYSMMU_CLOCK_DEVNAME(fimd0, 10), .enable = exynos4_clk_ip_lcd0_ctrl, .ctrlbit = (1 << 4), - }, { - .name = "SYSMMU_FIMD1", - .enable = exynos4_clk_ip_lcd1_ctrl, - .ctrlbit = (1 << 4), - }, { - .name = "SYSMMU_PCIe", - .enable = exynos4_clk_ip_fsys_ctrl, - .ctrlbit = (1 << 18), - }, { - .name = "SYSMMU_G2D", - .enable = exynos4_clk_ip_image_ctrl, - .ctrlbit = (1 << 3), - }, { - .name = "SYSMMU_ROTATOR", - .enable = exynos4_clk_ip_image_ctrl, - .ctrlbit = (1 << 4), - }, { - .name = "SYSMMU_TV", - .enable = exynos4_clk_ip_tv_ctrl, - .ctrlbit = (1 << 4), - }, { - .name = "SYSMMU_MFC_L", - .enable = exynos4_clk_ip_mfc_ctrl, - .ctrlbit = (1 << 1), - }, { - .name = "SYSMMU_MFC_R", - .enable = exynos4_clk_ip_mfc_ctrl, - .ctrlbit = (1 << 2), } }; diff --git a/arch/arm/mach-exynos/clock-exynos4.h b/arch/arm/mach-exynos/clock-exynos4.h index cb71c29c14d1..28a119701182 100644 --- a/arch/arm/mach-exynos/clock-exynos4.h +++ b/arch/arm/mach-exynos/clock-exynos4.h @@ -26,5 +26,7 @@ extern struct clk *exynos4_clkset_group_list[]; extern int exynos4_clksrc_mask_fsys_ctrl(struct clk *clk, int enable); extern int exynos4_clk_ip_fsys_ctrl(struct clk *clk, int enable); extern int exynos4_clk_ip_lcd1_ctrl(struct clk *clk, int enable); +extern int exynos4_clk_ip_image_ctrl(struct clk *clk, int enable); +extern int exynos4_clk_ip_dmc_ctrl(struct clk *clk, int enable); #endif /* __ASM_ARCH_CLOCK_H */ diff --git a/arch/arm/mach-exynos/clock-exynos4210.c b/arch/arm/mach-exynos/clock-exynos4210.c index 3b131e4b6ef5..b8689ff60baf 100644 --- a/arch/arm/mach-exynos/clock-exynos4210.c +++ b/arch/arm/mach-exynos/clock-exynos4210.c @@ -26,6 +26,7 @@ #include <mach/hardware.h> #include <mach/map.h> #include <mach/regs-clock.h> +#include <mach/sysmmu.h> #include "common.h" #include "clock-exynos4.h" @@ -94,6 +95,16 @@ static struct clk init_clocks_off[] = { .devname = "exynos4-fb.1", .enable = exynos4_clk_ip_lcd1_ctrl, .ctrlbit = (1 << 0), + }, { + .name = SYSMMU_CLOCK_NAME, + .devname = SYSMMU_CLOCK_DEVNAME(2d, 14), + .enable = exynos4_clk_ip_image_ctrl, + .ctrlbit = (1 << 3), + }, { + .name = SYSMMU_CLOCK_NAME, + .devname = SYSMMU_CLOCK_DEVNAME(fimd1, 11), + .enable = exynos4_clk_ip_lcd1_ctrl, + .ctrlbit = (1 << 4), }, }; diff --git a/arch/arm/mach-exynos/clock-exynos4212.c b/arch/arm/mach-exynos/clock-exynos4212.c index 3ecc01e06f74..98823120570e 100644 --- a/arch/arm/mach-exynos/clock-exynos4212.c +++ b/arch/arm/mach-exynos/clock-exynos4212.c @@ -26,6 +26,7 @@ #include <mach/hardware.h> #include <mach/map.h> #include <mach/regs-clock.h> +#include <mach/sysmmu.h> #include "common.h" #include "clock-exynos4.h" @@ -39,6 +40,16 @@ static struct sleep_save exynos4212_clock_save[] = { }; #endif +static int exynos4212_clk_ip_isp0_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(EXYNOS4_CLKGATE_IP_ISP0, clk, enable); +} + +static int exynos4212_clk_ip_isp1_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(EXYNOS4_CLKGATE_IP_ISP1, clk, enable); +} + static struct clk *clk_src_mpll_user_list[] = { [0] = &clk_fin_mpll, [1] = &exynos4_clk_mout_mpll.clk, @@ -66,7 +77,22 @@ static struct clksrc_clk clksrcs[] = { }; static struct clk init_clocks_off[] = { - /* nothing here yet */ + { + .name = SYSMMU_CLOCK_NAME, + .devname = SYSMMU_CLOCK_DEVNAME(2d, 14), + .enable = exynos4_clk_ip_dmc_ctrl, + .ctrlbit = (1 << 24), + }, { + .name = SYSMMU_CLOCK_NAME, + .devname = SYSMMU_CLOCK_DEVNAME(isp, 9), + .enable = exynos4212_clk_ip_isp0_ctrl, + .ctrlbit = (7 << 8), + }, { + .name = SYSMMU_CLOCK_NAME2, + .devname = SYSMMU_CLOCK_DEVNAME(isp, 9), + .enable = exynos4212_clk_ip_isp1_ctrl, + .ctrlbit = (1 << 4), + } }; #ifdef CONFIG_PM_SLEEP diff --git a/arch/arm/mach-exynos/clock-exynos5.c b/arch/arm/mach-exynos/clock-exynos5.c index 7ac6ff4c46bd..9f87a07b0bf8 100644 --- a/arch/arm/mach-exynos/clock-exynos5.c +++ b/arch/arm/mach-exynos/clock-exynos5.c @@ -82,6 +82,11 @@ static int exynos5_clksrc_mask_peric0_ctrl(struct clk *clk, int enable) return s5p_gatectrl(EXYNOS5_CLKSRC_MASK_PERIC0, clk, enable); } +static int exynos5_clk_ip_acp_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(EXYNOS5_CLKGATE_IP_ACP, clk, enable); +} + static int exynos5_clk_ip_core_ctrl(struct clk *clk, int enable) { return s5p_gatectrl(EXYNOS5_CLKGATE_IP_CORE, clk, enable); @@ -127,6 +132,21 @@ static int exynos5_clk_ip_peris_ctrl(struct clk *clk, int enable) return s5p_gatectrl(EXYNOS5_CLKGATE_IP_PERIS, clk, enable); } +static int exynos5_clk_ip_gscl_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(EXYNOS5_CLKGATE_IP_GSCL, clk, enable); +} + +static int exynos5_clk_ip_isp0_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(EXYNOS5_CLKGATE_IP_ISP0, clk, enable); +} + +static int exynos5_clk_ip_isp1_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(EXYNOS5_CLKGATE_IP_ISP1, clk, enable); +} + /* Core list of CMU_CPU side */ static struct clksrc_clk exynos5_clk_mout_apll = { @@ -630,6 +650,76 @@ static struct clk exynos5_init_clocks_off[] = { .parent = &exynos5_clk_aclk_66.clk, .enable = exynos5_clk_ip_peric_ctrl, .ctrlbit = (1 << 14), + }, { + .name = SYSMMU_CLOCK_NAME, + .devname = SYSMMU_CLOCK_DEVNAME(mfc_l, 0), + .enable = &exynos5_clk_ip_mfc_ctrl, + .ctrlbit = (1 << 1), + }, { + .name = SYSMMU_CLOCK_NAME, + .devname = SYSMMU_CLOCK_DEVNAME(mfc_r, 1), + .enable = &exynos5_clk_ip_mfc_ctrl, + .ctrlbit = (1 << 2), + }, { + .name = SYSMMU_CLOCK_NAME, + .devname = SYSMMU_CLOCK_DEVNAME(tv, 2), + .enable = &exynos5_clk_ip_disp1_ctrl, + .ctrlbit = (1 << 9) + }, { + .name = SYSMMU_CLOCK_NAME, + .devname = SYSMMU_CLOCK_DEVNAME(jpeg, 3), + .enable = &exynos5_clk_ip_gen_ctrl, + .ctrlbit = (1 << 7), + }, { + .name = SYSMMU_CLOCK_NAME, + .devname = SYSMMU_CLOCK_DEVNAME(rot, 4), + .enable = &exynos5_clk_ip_gen_ctrl, + .ctrlbit = (1 << 6) + }, { + .name = SYSMMU_CLOCK_NAME, + .devname = SYSMMU_CLOCK_DEVNAME(gsc0, 5), + .enable = &exynos5_clk_ip_gscl_ctrl, + .ctrlbit = (1 << 7), + }, { + .name = SYSMMU_CLOCK_NAME, + .devname = SYSMMU_CLOCK_DEVNAME(gsc1, 6), + .enable = &exynos5_clk_ip_gscl_ctrl, + .ctrlbit = (1 << 8), + }, { + .name = SYSMMU_CLOCK_NAME, + .devname = SYSMMU_CLOCK_DEVNAME(gsc2, 7), + .enable = &exynos5_clk_ip_gscl_ctrl, + .ctrlbit = (1 << 9), + }, { + .name = SYSMMU_CLOCK_NAME, + .devname = SYSMMU_CLOCK_DEVNAME(gsc3, 8), + .enable = &exynos5_clk_ip_gscl_ctrl, + .ctrlbit = (1 << 10), + }, { + .name = SYSMMU_CLOCK_NAME, + .devname = SYSMMU_CLOCK_DEVNAME(isp, 9), + .enable = &exynos5_clk_ip_isp0_ctrl, + .ctrlbit = (0x3F << 8), + }, { + .name = SYSMMU_CLOCK_NAME2, + .devname = SYSMMU_CLOCK_DEVNAME(isp, 9), + .enable = &exynos5_clk_ip_isp1_ctrl, + .ctrlbit = (0xF << 4), + }, { + .name = SYSMMU_CLOCK_NAME, + .devname = SYSMMU_CLOCK_DEVNAME(camif0, 12), + .enable = &exynos5_clk_ip_gscl_ctrl, + .ctrlbit = (1 << 11), + }, { + .name = SYSMMU_CLOCK_NAME, + .devname = SYSMMU_CLOCK_DEVNAME(camif1, 13), + .enable = &exynos5_clk_ip_gscl_ctrl, + .ctrlbit = (1 << 12), + }, { + .name = SYSMMU_CLOCK_NAME, + .devname = SYSMMU_CLOCK_DEVNAME(2d, 14), + .enable = &exynos5_clk_ip_acp_ctrl, + .ctrlbit = (1 << 7) } }; diff --git a/arch/arm/mach-exynos/dev-sysmmu.c b/arch/arm/mach-exynos/dev-sysmmu.c index 781563fcb156..c5b1ea301df0 100644 --- a/arch/arm/mach-exynos/dev-sysmmu.c +++ b/arch/arm/mach-exynos/dev-sysmmu.c @@ -1,9 +1,9 @@ -/* linux/arch/arm/mach-exynos4/dev-sysmmu.c +/* linux/arch/arm/mach-exynos/dev-sysmmu.c * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * Copyright (c) 2010-2012 Samsung Electronics Co., Ltd. * http://www.samsung.com * - * EXYNOS4 - System MMU support + * EXYNOS - System MMU support * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -12,222 +12,263 @@ #include <linux/platform_device.h> #include <linux/dma-mapping.h> -#include <linux/export.h> + +#include <plat/cpu.h> #include <mach/map.h> #include <mach/irqs.h> #include <mach/sysmmu.h> -#include <plat/s5p-clock.h> - -/* These names must be equal to the clock names in mach-exynos4/clock.c */ -const char *sysmmu_ips_name[EXYNOS4_SYSMMU_TOTAL_IPNUM] = { - "SYSMMU_MDMA" , - "SYSMMU_SSS" , - "SYSMMU_FIMC0" , - "SYSMMU_FIMC1" , - "SYSMMU_FIMC2" , - "SYSMMU_FIMC3" , - "SYSMMU_JPEG" , - "SYSMMU_FIMD0" , - "SYSMMU_FIMD1" , - "SYSMMU_PCIe" , - "SYSMMU_G2D" , - "SYSMMU_ROTATOR", - "SYSMMU_MDMA2" , - "SYSMMU_TV" , - "SYSMMU_MFC_L" , - "SYSMMU_MFC_R" , -}; -static struct resource exynos4_sysmmu_resource[] = { - [0] = { - .start = EXYNOS4_PA_SYSMMU_MDMA, - .end = EXYNOS4_PA_SYSMMU_MDMA + SZ_64K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_SYSMMU_MDMA0_0, - .end = IRQ_SYSMMU_MDMA0_0, - .flags = IORESOURCE_IRQ, - }, - [2] = { - .start = EXYNOS4_PA_SYSMMU_SSS, - .end = EXYNOS4_PA_SYSMMU_SSS + SZ_64K - 1, - .flags = IORESOURCE_MEM, - }, - [3] = { - .start = IRQ_SYSMMU_SSS_0, - .end = IRQ_SYSMMU_SSS_0, - .flags = IORESOURCE_IRQ, - }, - [4] = { - .start = EXYNOS4_PA_SYSMMU_FIMC0, - .end = EXYNOS4_PA_SYSMMU_FIMC0 + SZ_64K - 1, - .flags = IORESOURCE_MEM, - }, - [5] = { - .start = IRQ_SYSMMU_FIMC0_0, - .end = IRQ_SYSMMU_FIMC0_0, - .flags = IORESOURCE_IRQ, - }, - [6] = { - .start = EXYNOS4_PA_SYSMMU_FIMC1, - .end = EXYNOS4_PA_SYSMMU_FIMC1 + SZ_64K - 1, - .flags = IORESOURCE_MEM, - }, - [7] = { - .start = IRQ_SYSMMU_FIMC1_0, - .end = IRQ_SYSMMU_FIMC1_0, - .flags = IORESOURCE_IRQ, - }, - [8] = { - .start = EXYNOS4_PA_SYSMMU_FIMC2, - .end = EXYNOS4_PA_SYSMMU_FIMC2 + SZ_64K - 1, - .flags = IORESOURCE_MEM, - }, - [9] = { - .start = IRQ_SYSMMU_FIMC2_0, - .end = IRQ_SYSMMU_FIMC2_0, - .flags = IORESOURCE_IRQ, - }, - [10] = { - .start = EXYNOS4_PA_SYSMMU_FIMC3, - .end = EXYNOS4_PA_SYSMMU_FIMC3 + SZ_64K - 1, - .flags = IORESOURCE_MEM, - }, - [11] = { - .start = IRQ_SYSMMU_FIMC3_0, - .end = IRQ_SYSMMU_FIMC3_0, - .flags = IORESOURCE_IRQ, - }, - [12] = { - .start = EXYNOS4_PA_SYSMMU_JPEG, - .end = EXYNOS4_PA_SYSMMU_JPEG + SZ_64K - 1, - .flags = IORESOURCE_MEM, - }, - [13] = { - .start = IRQ_SYSMMU_JPEG_0, - .end = IRQ_SYSMMU_JPEG_0, - .flags = IORESOURCE_IRQ, - }, - [14] = { - .start = EXYNOS4_PA_SYSMMU_FIMD0, - .end = EXYNOS4_PA_SYSMMU_FIMD0 + SZ_64K - 1, - .flags = IORESOURCE_MEM, - }, - [15] = { - .start = IRQ_SYSMMU_LCD0_M0_0, - .end = IRQ_SYSMMU_LCD0_M0_0, - .flags = IORESOURCE_IRQ, - }, - [16] = { - .start = EXYNOS4_PA_SYSMMU_FIMD1, - .end = EXYNOS4_PA_SYSMMU_FIMD1 + SZ_64K - 1, - .flags = IORESOURCE_MEM, - }, - [17] = { - .start = IRQ_SYSMMU_LCD1_M1_0, - .end = IRQ_SYSMMU_LCD1_M1_0, - .flags = IORESOURCE_IRQ, - }, - [18] = { - .start = EXYNOS4_PA_SYSMMU_PCIe, - .end = EXYNOS4_PA_SYSMMU_PCIe + SZ_64K - 1, - .flags = IORESOURCE_MEM, - }, - [19] = { - .start = IRQ_SYSMMU_PCIE_0, - .end = IRQ_SYSMMU_PCIE_0, - .flags = IORESOURCE_IRQ, - }, - [20] = { - .start = EXYNOS4_PA_SYSMMU_G2D, - .end = EXYNOS4_PA_SYSMMU_G2D + SZ_64K - 1, - .flags = IORESOURCE_MEM, - }, - [21] = { - .start = IRQ_SYSMMU_2D_0, - .end = IRQ_SYSMMU_2D_0, - .flags = IORESOURCE_IRQ, - }, - [22] = { - .start = EXYNOS4_PA_SYSMMU_ROTATOR, - .end = EXYNOS4_PA_SYSMMU_ROTATOR + SZ_64K - 1, - .flags = IORESOURCE_MEM, - }, - [23] = { - .start = IRQ_SYSMMU_ROTATOR_0, - .end = IRQ_SYSMMU_ROTATOR_0, - .flags = IORESOURCE_IRQ, - }, - [24] = { - .start = EXYNOS4_PA_SYSMMU_MDMA2, - .end = EXYNOS4_PA_SYSMMU_MDMA2 + SZ_64K - 1, - .flags = IORESOURCE_MEM, - }, - [25] = { - .start = IRQ_SYSMMU_MDMA1_0, - .end = IRQ_SYSMMU_MDMA1_0, - .flags = IORESOURCE_IRQ, - }, - [26] = { - .start = EXYNOS4_PA_SYSMMU_TV, - .end = EXYNOS4_PA_SYSMMU_TV + SZ_64K - 1, - .flags = IORESOURCE_MEM, - }, - [27] = { - .start = IRQ_SYSMMU_TV_M0_0, - .end = IRQ_SYSMMU_TV_M0_0, - .flags = IORESOURCE_IRQ, - }, - [28] = { - .start = EXYNOS4_PA_SYSMMU_MFC_L, - .end = EXYNOS4_PA_SYSMMU_MFC_L + SZ_64K - 1, - .flags = IORESOURCE_MEM, - }, - [29] = { - .start = IRQ_SYSMMU_MFC_M0_0, - .end = IRQ_SYSMMU_MFC_M0_0, - .flags = IORESOURCE_IRQ, - }, - [30] = { - .start = EXYNOS4_PA_SYSMMU_MFC_R, - .end = EXYNOS4_PA_SYSMMU_MFC_R + SZ_64K - 1, - .flags = IORESOURCE_MEM, - }, - [31] = { - .start = IRQ_SYSMMU_MFC_M1_0, - .end = IRQ_SYSMMU_MFC_M1_0, - .flags = IORESOURCE_IRQ, - }, -}; +static u64 exynos_sysmmu_dma_mask = DMA_BIT_MASK(32); + +#define SYSMMU_PLATFORM_DEVICE(ipname, devid) \ +static struct sysmmu_platform_data platdata_##ipname = { \ + .dbgname = #ipname, \ +}; \ +struct platform_device SYSMMU_PLATDEV(ipname) = \ +{ \ + .name = SYSMMU_DEVNAME_BASE, \ + .id = devid, \ + .dev = { \ + .dma_mask = &exynos_sysmmu_dma_mask, \ + .coherent_dma_mask = DMA_BIT_MASK(32), \ + .platform_data = &platdata_##ipname, \ + }, \ +} + +SYSMMU_PLATFORM_DEVICE(mfc_l, 0); +SYSMMU_PLATFORM_DEVICE(mfc_r, 1); +SYSMMU_PLATFORM_DEVICE(tv, 2); +SYSMMU_PLATFORM_DEVICE(jpeg, 3); +SYSMMU_PLATFORM_DEVICE(rot, 4); +SYSMMU_PLATFORM_DEVICE(fimc0, 5); /* fimc* and gsc* exist exclusively */ +SYSMMU_PLATFORM_DEVICE(fimc1, 6); +SYSMMU_PLATFORM_DEVICE(fimc2, 7); +SYSMMU_PLATFORM_DEVICE(fimc3, 8); +SYSMMU_PLATFORM_DEVICE(gsc0, 5); +SYSMMU_PLATFORM_DEVICE(gsc1, 6); +SYSMMU_PLATFORM_DEVICE(gsc2, 7); +SYSMMU_PLATFORM_DEVICE(gsc3, 8); +SYSMMU_PLATFORM_DEVICE(isp, 9); +SYSMMU_PLATFORM_DEVICE(fimd0, 10); +SYSMMU_PLATFORM_DEVICE(fimd1, 11); +SYSMMU_PLATFORM_DEVICE(camif0, 12); +SYSMMU_PLATFORM_DEVICE(camif1, 13); +SYSMMU_PLATFORM_DEVICE(2d, 14); + +#define SYSMMU_RESOURCE_NAME(core, ipname) sysmmures_##core##_##ipname + +#define SYSMMU_RESOURCE(core, ipname) \ + static struct resource SYSMMU_RESOURCE_NAME(core, ipname)[] __initdata = + +#define DEFINE_SYSMMU_RESOURCE(core, mem, irq) \ + DEFINE_RES_MEM_NAMED(core##_PA_SYSMMU_##mem, SZ_4K, #mem), \ + DEFINE_RES_IRQ_NAMED(core##_IRQ_SYSMMU_##irq##_0, #mem) + +#define SYSMMU_RESOURCE_DEFINE(core, ipname, mem, irq) \ + SYSMMU_RESOURCE(core, ipname) { \ + DEFINE_SYSMMU_RESOURCE(core, mem, irq) \ + } -struct platform_device exynos4_device_sysmmu = { - .name = "s5p-sysmmu", - .id = 32, - .num_resources = ARRAY_SIZE(exynos4_sysmmu_resource), - .resource = exynos4_sysmmu_resource, +struct sysmmu_resource_map { + struct platform_device *pdev; + struct resource *res; + u32 rnum; + struct device *pdd; + char *clocknames; }; -EXPORT_SYMBOL(exynos4_device_sysmmu); -static struct clk *sysmmu_clk[S5P_SYSMMU_TOTAL_IPNUM]; -void sysmmu_clk_init(struct device *dev, sysmmu_ips ips) -{ - sysmmu_clk[ips] = clk_get(dev, sysmmu_ips_name[ips]); - if (IS_ERR(sysmmu_clk[ips])) - sysmmu_clk[ips] = NULL; - else - clk_put(sysmmu_clk[ips]); +#define SYSMMU_RESOURCE_MAPPING(core, ipname, resname) { \ + .pdev = &SYSMMU_PLATDEV(ipname), \ + .res = SYSMMU_RESOURCE_NAME(EXYNOS##core, resname), \ + .rnum = ARRAY_SIZE(SYSMMU_RESOURCE_NAME(EXYNOS##core, resname)),\ + .clocknames = SYSMMU_CLOCK_NAME, \ } -void sysmmu_clk_enable(sysmmu_ips ips) -{ - if (sysmmu_clk[ips]) - clk_enable(sysmmu_clk[ips]); +#define SYSMMU_RESOURCE_MAPPING_MC(core, ipname, resname, pdata) { \ + .pdev = &SYSMMU_PLATDEV(ipname), \ + .res = SYSMMU_RESOURCE_NAME(EXYNOS##core, resname), \ + .rnum = ARRAY_SIZE(SYSMMU_RESOURCE_NAME(EXYNOS##core, resname)),\ + .clocknames = SYSMMU_CLOCK_NAME "," SYSMMU_CLOCK_NAME2, \ +} + +#ifdef CONFIG_EXYNOS_DEV_PD +#define SYSMMU_RESOURCE_MAPPING_PD(core, ipname, resname, pd) { \ + .pdev = &SYSMMU_PLATDEV(ipname), \ + .res = &SYSMMU_RESOURCE_NAME(EXYNOS##core, resname), \ + .rnum = ARRAY_SIZE(SYSMMU_RESOURCE_NAME(EXYNOS##core, resname)),\ + .clocknames = SYSMMU_CLOCK_NAME, \ + .pdd = &exynos##core##_device_pd[pd].dev, \ +} + +#define SYSMMU_RESOURCE_MAPPING_MCPD(core, ipname, resname, pd, pdata) {\ + .pdev = &SYSMMU_PLATDEV(ipname), \ + .res = &SYSMMU_RESOURCE_NAME(EXYNOS##core, resname), \ + .rnum = ARRAY_SIZE(SYSMMU_RESOURCE_NAME(EXYNOS##core, resname)),\ + .clocknames = SYSMMU_CLOCK_NAME "," SYSMMU_CLOCK_NAME2, \ + .pdd = &exynos##core##_device_pd[pd].dev, \ } +#else +#define SYSMMU_RESOURCE_MAPPING_PD(core, ipname, resname, pd) \ + SYSMMU_RESOURCE_MAPPING(core, ipname, resname) +#define SYSMMU_RESOURCE_MAPPING_MCPD(core, ipname, resname, pd, pdata) \ + SYSMMU_RESOURCE_MAPPING_MC(core, ipname, resname, pdata) + +#endif /* CONFIG_EXYNOS_DEV_PD */ + +#ifdef CONFIG_ARCH_EXYNOS4 +SYSMMU_RESOURCE_DEFINE(EXYNOS4, fimc0, FIMC0, FIMC0); +SYSMMU_RESOURCE_DEFINE(EXYNOS4, fimc1, FIMC1, FIMC1); +SYSMMU_RESOURCE_DEFINE(EXYNOS4, fimc2, FIMC2, FIMC2); +SYSMMU_RESOURCE_DEFINE(EXYNOS4, fimc3, FIMC3, FIMC3); +SYSMMU_RESOURCE_DEFINE(EXYNOS4, jpeg, JPEG, JPEG); +SYSMMU_RESOURCE_DEFINE(EXYNOS4, 2d, G2D, 2D); +SYSMMU_RESOURCE_DEFINE(EXYNOS4, tv, TV, TV_M0); +SYSMMU_RESOURCE_DEFINE(EXYNOS4, 2d_acp, 2D_ACP, 2D); +SYSMMU_RESOURCE_DEFINE(EXYNOS4, rot, ROTATOR, ROTATOR); +SYSMMU_RESOURCE_DEFINE(EXYNOS4, fimd0, FIMD0, LCD0_M0); +SYSMMU_RESOURCE_DEFINE(EXYNOS4, fimd1, FIMD1, LCD1_M1); +SYSMMU_RESOURCE_DEFINE(EXYNOS4, flite0, FIMC_LITE0, FIMC_LITE0); +SYSMMU_RESOURCE_DEFINE(EXYNOS4, flite1, FIMC_LITE1, FIMC_LITE1); +SYSMMU_RESOURCE_DEFINE(EXYNOS4, mfc_r, MFC_R, MFC_M0); +SYSMMU_RESOURCE_DEFINE(EXYNOS4, mfc_l, MFC_L, MFC_M1); +SYSMMU_RESOURCE(EXYNOS4, isp) { + DEFINE_SYSMMU_RESOURCE(EXYNOS4, FIMC_ISP, FIMC_ISP), + DEFINE_SYSMMU_RESOURCE(EXYNOS4, FIMC_DRC, FIMC_DRC), + DEFINE_SYSMMU_RESOURCE(EXYNOS4, FIMC_FD, FIMC_FD), + DEFINE_SYSMMU_RESOURCE(EXYNOS4, ISPCPU, FIMC_CX), +}; + +static struct sysmmu_resource_map sysmmu_resmap4[] __initdata = { + SYSMMU_RESOURCE_MAPPING_PD(4, fimc0, fimc0, PD_CAM), + SYSMMU_RESOURCE_MAPPING_PD(4, fimc1, fimc1, PD_CAM), + SYSMMU_RESOURCE_MAPPING_PD(4, fimc2, fimc2, PD_CAM), + SYSMMU_RESOURCE_MAPPING_PD(4, fimc3, fimc3, PD_CAM), + SYSMMU_RESOURCE_MAPPING_PD(4, tv, tv, PD_TV), + SYSMMU_RESOURCE_MAPPING_PD(4, mfc_r, mfc_r, PD_MFC), + SYSMMU_RESOURCE_MAPPING_PD(4, mfc_l, mfc_l, PD_MFC), + SYSMMU_RESOURCE_MAPPING_PD(4, rot, rot, PD_LCD0), + SYSMMU_RESOURCE_MAPPING_PD(4, jpeg, jpeg, PD_CAM), + SYSMMU_RESOURCE_MAPPING_PD(4, fimd0, fimd0, PD_LCD0), +}; + +static struct sysmmu_resource_map sysmmu_resmap4210[] __initdata = { + SYSMMU_RESOURCE_MAPPING_PD(4, 2d, 2d, PD_LCD0), + SYSMMU_RESOURCE_MAPPING_PD(4, fimd1, fimd1, PD_LCD1), +}; + +static struct sysmmu_resource_map sysmmu_resmap4212[] __initdata = { + SYSMMU_RESOURCE_MAPPING(4, 2d, 2d_acp), + SYSMMU_RESOURCE_MAPPING_PD(4, camif0, flite0, PD_ISP), + SYSMMU_RESOURCE_MAPPING_PD(4, camif1, flite1, PD_ISP), + SYSMMU_RESOURCE_MAPPING_PD(4, isp, isp, PD_ISP), +}; +#endif /* CONFIG_ARCH_EXYNOS4 */ -void sysmmu_clk_disable(sysmmu_ips ips) +#ifdef CONFIG_ARCH_EXYNOS5 +SYSMMU_RESOURCE_DEFINE(EXYNOS5, jpeg, JPEG, JPEG); +SYSMMU_RESOURCE_DEFINE(EXYNOS5, fimd1, FIMD1, FIMD1); +SYSMMU_RESOURCE_DEFINE(EXYNOS5, 2d, 2D, 2D); +SYSMMU_RESOURCE_DEFINE(EXYNOS5, rot, ROTATOR, ROTATOR); +SYSMMU_RESOURCE_DEFINE(EXYNOS5, tv, TV, TV); +SYSMMU_RESOURCE_DEFINE(EXYNOS5, flite0, LITE0, LITE0); +SYSMMU_RESOURCE_DEFINE(EXYNOS5, flite1, LITE1, LITE1); +SYSMMU_RESOURCE_DEFINE(EXYNOS5, gsc0, GSC0, GSC0); +SYSMMU_RESOURCE_DEFINE(EXYNOS5, gsc1, GSC1, GSC1); +SYSMMU_RESOURCE_DEFINE(EXYNOS5, gsc2, GSC2, GSC2); +SYSMMU_RESOURCE_DEFINE(EXYNOS5, gsc3, GSC3, GSC3); +SYSMMU_RESOURCE_DEFINE(EXYNOS5, mfc_r, MFC_R, MFC_R); +SYSMMU_RESOURCE_DEFINE(EXYNOS5, mfc_l, MFC_L, MFC_L); +SYSMMU_RESOURCE(EXYNOS5, isp) { + DEFINE_SYSMMU_RESOURCE(EXYNOS5, ISP, ISP), + DEFINE_SYSMMU_RESOURCE(EXYNOS5, DRC, DRC), + DEFINE_SYSMMU_RESOURCE(EXYNOS5, FD, FD), + DEFINE_SYSMMU_RESOURCE(EXYNOS5, ISPCPU, MCUISP), + DEFINE_SYSMMU_RESOURCE(EXYNOS5, SCALERC, SCALERCISP), + DEFINE_SYSMMU_RESOURCE(EXYNOS5, SCALERP, SCALERPISP), + DEFINE_SYSMMU_RESOURCE(EXYNOS5, ODC, ODC), + DEFINE_SYSMMU_RESOURCE(EXYNOS5, DIS0, DIS0), + DEFINE_SYSMMU_RESOURCE(EXYNOS5, DIS1, DIS1), + DEFINE_SYSMMU_RESOURCE(EXYNOS5, 3DNR, 3DNR), +}; + +static struct sysmmu_resource_map sysmmu_resmap5[] __initdata = { + SYSMMU_RESOURCE_MAPPING(5, jpeg, jpeg), + SYSMMU_RESOURCE_MAPPING(5, fimd1, fimd1), + SYSMMU_RESOURCE_MAPPING(5, 2d, 2d), + SYSMMU_RESOURCE_MAPPING(5, rot, rot), + SYSMMU_RESOURCE_MAPPING_PD(5, tv, tv, PD_DISP1), + SYSMMU_RESOURCE_MAPPING_PD(5, camif0, flite0, PD_GSCL), + SYSMMU_RESOURCE_MAPPING_PD(5, camif1, flite1, PD_GSCL), + SYSMMU_RESOURCE_MAPPING_PD(5, gsc0, gsc0, PD_GSCL), + SYSMMU_RESOURCE_MAPPING_PD(5, gsc1, gsc1, PD_GSCL), + SYSMMU_RESOURCE_MAPPING_PD(5, gsc2, gsc2, PD_GSCL), + SYSMMU_RESOURCE_MAPPING_PD(5, gsc3, gsc3, PD_GSCL), + SYSMMU_RESOURCE_MAPPING_PD(5, mfc_r, mfc_r, PD_MFC), + SYSMMU_RESOURCE_MAPPING_PD(5, mfc_l, mfc_l, PD_MFC), + SYSMMU_RESOURCE_MAPPING_MCPD(5, isp, isp, PD_ISP, mc_platdata), +}; +#endif /* CONFIG_ARCH_EXYNOS5 */ + +static int __init init_sysmmu_platform_device(void) { - if (sysmmu_clk[ips]) - clk_disable(sysmmu_clk[ips]); + int i, j; + struct sysmmu_resource_map *resmap[2] = {NULL, NULL}; + int nmap[2] = {0, 0}; + +#ifdef CONFIG_ARCH_EXYNOS5 + if (soc_is_exynos5250()) { + resmap[0] = sysmmu_resmap5; + nmap[0] = ARRAY_SIZE(sysmmu_resmap5); + nmap[1] = 0; + } +#endif + +#ifdef CONFIG_ARCH_EXYNOS4 + if (resmap[0] == NULL) { + resmap[0] = sysmmu_resmap4; + nmap[0] = ARRAY_SIZE(sysmmu_resmap4); + } + + if (soc_is_exynos4210()) { + resmap[1] = sysmmu_resmap4210; + nmap[1] = ARRAY_SIZE(sysmmu_resmap4210); + } + + if (soc_is_exynos4412() || soc_is_exynos4212()) { + resmap[1] = sysmmu_resmap4212; + nmap[1] = ARRAY_SIZE(sysmmu_resmap4212); + } +#endif + + for (j = 0; j < 2; j++) { + for (i = 0; i < nmap[j]; i++) { + struct sysmmu_resource_map *map; + struct sysmmu_platform_data *platdata; + + map = &resmap[j][i]; + + map->pdev->dev.parent = map->pdd; + + platdata = map->pdev->dev.platform_data; + platdata->clockname = map->clocknames; + + if (platform_device_add_resources(map->pdev, map->res, + map->rnum)) { + pr_err("%s: Failed to add device resources for " + "%s.%d\n", __func__, + map->pdev->name, map->pdev->id); + continue; + } + + if (platform_device_register(map->pdev)) { + pr_err("%s: Failed to register %s.%d\n", + __func__, map->pdev->name, + map->pdev->id); + } + } + } + + return 0; } +arch_initcall(init_sysmmu_platform_device); diff --git a/arch/arm/mach-exynos/include/mach/irqs.h b/arch/arm/mach-exynos/include/mach/irqs.h index c02dae7bf4a3..ddde8f3a24d4 100644 --- a/arch/arm/mach-exynos/include/mach/irqs.h +++ b/arch/arm/mach-exynos/include/mach/irqs.h @@ -154,6 +154,13 @@ #define EXYNOS4_IRQ_SYSMMU_MFC_M1_0 COMBINER_IRQ(5, 6) #define EXYNOS4_IRQ_SYSMMU_PCIE_0 COMBINER_IRQ(5, 7) +#define EXYNOS4_IRQ_SYSMMU_FIMC_LITE0_0 COMBINER_IRQ(16, 0) +#define EXYNOS4_IRQ_SYSMMU_FIMC_LITE1_0 COMBINER_IRQ(16, 1) +#define EXYNOS4_IRQ_SYSMMU_FIMC_ISP_0 COMBINER_IRQ(16, 2) +#define EXYNOS4_IRQ_SYSMMU_FIMC_DRC_0 COMBINER_IRQ(16, 3) +#define EXYNOS4_IRQ_SYSMMU_FIMC_FD_0 COMBINER_IRQ(16, 4) +#define EXYNOS4_IRQ_SYSMMU_FIMC_CX_0 COMBINER_IRQ(16, 5) + #define EXYNOS4_IRQ_FIMD0_FIFO COMBINER_IRQ(11, 0) #define EXYNOS4_IRQ_FIMD0_VSYNC COMBINER_IRQ(11, 1) #define EXYNOS4_IRQ_FIMD0_SYSTEM COMBINER_IRQ(11, 2) @@ -221,24 +228,6 @@ #define IRQ_KEYPAD EXYNOS4_IRQ_KEYPAD #define IRQ_PMU EXYNOS4_IRQ_PMU -#define IRQ_SYSMMU_MDMA0_0 EXYNOS4_IRQ_SYSMMU_MDMA0_0 -#define IRQ_SYSMMU_SSS_0 EXYNOS4_IRQ_SYSMMU_SSS_0 -#define IRQ_SYSMMU_FIMC0_0 EXYNOS4_IRQ_SYSMMU_FIMC0_0 -#define IRQ_SYSMMU_FIMC1_0 EXYNOS4_IRQ_SYSMMU_FIMC1_0 -#define IRQ_SYSMMU_FIMC2_0 EXYNOS4_IRQ_SYSMMU_FIMC2_0 -#define IRQ_SYSMMU_FIMC3_0 EXYNOS4_IRQ_SYSMMU_FIMC3_0 -#define IRQ_SYSMMU_JPEG_0 EXYNOS4_IRQ_SYSMMU_JPEG_0 -#define IRQ_SYSMMU_2D_0 EXYNOS4_IRQ_SYSMMU_2D_0 - -#define IRQ_SYSMMU_ROTATOR_0 EXYNOS4_IRQ_SYSMMU_ROTATOR_0 -#define IRQ_SYSMMU_MDMA1_0 EXYNOS4_IRQ_SYSMMU_MDMA1_0 -#define IRQ_SYSMMU_LCD0_M0_0 EXYNOS4_IRQ_SYSMMU_LCD0_M0_0 -#define IRQ_SYSMMU_LCD1_M1_0 EXYNOS4_IRQ_SYSMMU_LCD1_M1_0 -#define IRQ_SYSMMU_TV_M0_0 EXYNOS4_IRQ_SYSMMU_TV_M0_0 -#define IRQ_SYSMMU_MFC_M0_0 EXYNOS4_IRQ_SYSMMU_MFC_M0_0 -#define IRQ_SYSMMU_MFC_M1_0 EXYNOS4_IRQ_SYSMMU_MFC_M1_0 -#define IRQ_SYSMMU_PCIE_0 EXYNOS4_IRQ_SYSMMU_PCIE_0 - #define IRQ_FIMD0_FIFO EXYNOS4_IRQ_FIMD0_FIFO #define IRQ_FIMD0_VSYNC EXYNOS4_IRQ_FIMD0_VSYNC #define IRQ_FIMD0_SYSTEM EXYNOS4_IRQ_FIMD0_SYSTEM diff --git a/arch/arm/mach-exynos/include/mach/map.h b/arch/arm/mach-exynos/include/mach/map.h index e009a66477f4..2196af2d8218 100644 --- a/arch/arm/mach-exynos/include/mach/map.h +++ b/arch/arm/mach-exynos/include/mach/map.h @@ -95,6 +95,7 @@ #define EXYNOS5_PA_PDMA1 0x121B0000 #define EXYNOS4_PA_SYSMMU_MDMA 0x10A40000 +#define EXYNOS4_PA_SYSMMU_2D_ACP 0x10A40000 #define EXYNOS4_PA_SYSMMU_SSS 0x10A50000 #define EXYNOS4_PA_SYSMMU_FIMC0 0x11A20000 #define EXYNOS4_PA_SYSMMU_FIMC1 0x11A30000 @@ -103,6 +104,12 @@ #define EXYNOS4_PA_SYSMMU_JPEG 0x11A60000 #define EXYNOS4_PA_SYSMMU_FIMD0 0x11E20000 #define EXYNOS4_PA_SYSMMU_FIMD1 0x12220000 +#define EXYNOS4_PA_SYSMMU_FIMC_ISP 0x12260000 +#define EXYNOS4_PA_SYSMMU_FIMC_DRC 0x12270000 +#define EXYNOS4_PA_SYSMMU_FIMC_FD 0x122A0000 +#define EXYNOS4_PA_SYSMMU_ISPCPU 0x122B0000 +#define EXYNOS4_PA_SYSMMU_FIMC_LITE0 0x123B0000 +#define EXYNOS4_PA_SYSMMU_FIMC_LITE1 0x123C0000 #define EXYNOS4_PA_SYSMMU_PCIe 0x12620000 #define EXYNOS4_PA_SYSMMU_G2D 0x12A20000 #define EXYNOS4_PA_SYSMMU_ROTATOR 0x12A30000 @@ -110,6 +117,37 @@ #define EXYNOS4_PA_SYSMMU_TV 0x12E20000 #define EXYNOS4_PA_SYSMMU_MFC_L 0x13620000 #define EXYNOS4_PA_SYSMMU_MFC_R 0x13630000 + +#define EXYNOS5_PA_SYSMMU_MDMA1 0x10A40000 +#define EXYNOS5_PA_SYSMMU_SSS 0x10A50000 +#define EXYNOS5_PA_SYSMMU_2D 0x10A60000 +#define EXYNOS5_PA_SYSMMU_MFC_L 0x11200000 +#define EXYNOS5_PA_SYSMMU_MFC_R 0x11210000 +#define EXYNOS5_PA_SYSMMU_ROTATOR 0x11D40000 +#define EXYNOS5_PA_SYSMMU_MDMA2 0x11D50000 +#define EXYNOS5_PA_SYSMMU_JPEG 0x11F20000 +#define EXYNOS5_PA_SYSMMU_IOP 0x12360000 +#define EXYNOS5_PA_SYSMMU_RTIC 0x12370000 +#define EXYNOS5_PA_SYSMMU_GPS 0x12630000 +#define EXYNOS5_PA_SYSMMU_ISP 0x13260000 +#define EXYNOS5_PA_SYSMMU_DRC 0x12370000 +#define EXYNOS5_PA_SYSMMU_SCALERC 0x13280000 +#define EXYNOS5_PA_SYSMMU_SCALERP 0x13290000 +#define EXYNOS5_PA_SYSMMU_FD 0x132A0000 +#define EXYNOS5_PA_SYSMMU_ISPCPU 0x132B0000 +#define EXYNOS5_PA_SYSMMU_ODC 0x132C0000 +#define EXYNOS5_PA_SYSMMU_DIS0 0x132D0000 +#define EXYNOS5_PA_SYSMMU_DIS1 0x132E0000 +#define EXYNOS5_PA_SYSMMU_3DNR 0x132F0000 +#define EXYNOS5_PA_SYSMMU_LITE0 0x13C40000 +#define EXYNOS5_PA_SYSMMU_LITE1 0x13C50000 +#define EXYNOS5_PA_SYSMMU_GSC0 0x13E80000 +#define EXYNOS5_PA_SYSMMU_GSC1 0x13E90000 +#define EXYNOS5_PA_SYSMMU_GSC2 0x13EA0000 +#define EXYNOS5_PA_SYSMMU_GSC3 0x13EB0000 +#define EXYNOS5_PA_SYSMMU_FIMD1 0x14640000 +#define EXYNOS5_PA_SYSMMU_TV 0x14650000 + #define EXYNOS4_PA_SPI0 0x13920000 #define EXYNOS4_PA_SPI1 0x13930000 #define EXYNOS4_PA_SPI2 0x13940000 diff --git a/arch/arm/mach-exynos/include/mach/regs-clock.h b/arch/arm/mach-exynos/include/mach/regs-clock.h index d9578a58ae7f..dba83e91f0fd 100644 --- a/arch/arm/mach-exynos/include/mach/regs-clock.h +++ b/arch/arm/mach-exynos/include/mach/regs-clock.h @@ -135,6 +135,9 @@ #define EXYNOS4_CLKGATE_SCLKCPU EXYNOS_CLKREG(0x14800) #define EXYNOS4_CLKGATE_IP_CPU EXYNOS_CLKREG(0x14900) +#define EXYNOS4_CLKGATE_IP_ISP0 EXYNOS_CLKREG(0x18800) +#define EXYNOS4_CLKGATE_IP_ISP1 EXYNOS_CLKREG(0x18804) + #define EXYNOS4_APLL_LOCKTIME (0x1C20) /* 300us */ #define EXYNOS4_APLLCON0_ENABLE_SHIFT (31) @@ -303,6 +306,8 @@ #define EXYNOS5_CLKDIV_PERIC0 EXYNOS_CLKREG(0x10558) #define EXYNOS5_CLKGATE_IP_ACP EXYNOS_CLKREG(0x08800) +#define EXYNOS5_CLKGATE_IP_ISP0 EXYNOS_CLKREG(0x0C800) +#define EXYNOS5_CLKGATE_IP_ISP1 EXYNOS_CLKREG(0x0C804) #define EXYNOS5_CLKGATE_IP_GSCL EXYNOS_CLKREG(0x10920) #define EXYNOS5_CLKGATE_IP_DISP1 EXYNOS_CLKREG(0x10928) #define EXYNOS5_CLKGATE_IP_MFC EXYNOS_CLKREG(0x1092C) diff --git a/arch/arm/mach-exynos/include/mach/regs-sysmmu.h b/arch/arm/mach-exynos/include/mach/regs-sysmmu.h deleted file mode 100644 index 68ff6ad08a2b..000000000000 --- a/arch/arm/mach-exynos/include/mach/regs-sysmmu.h +++ /dev/null @@ -1,28 +0,0 @@ -/* linux/arch/arm/mach-exynos4/include/mach/regs-sysmmu.h - * - * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * EXYNOS4 - System MMU register - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_REGS_SYSMMU_H -#define __ASM_ARCH_REGS_SYSMMU_H __FILE__ - -#define S5P_MMU_CTRL 0x000 -#define S5P_MMU_CFG 0x004 -#define S5P_MMU_STATUS 0x008 -#define S5P_MMU_FLUSH 0x00C -#define S5P_PT_BASE_ADDR 0x014 -#define S5P_INT_STATUS 0x018 -#define S5P_INT_CLEAR 0x01C -#define S5P_PAGE_FAULT_ADDR 0x024 -#define S5P_AW_FAULT_ADDR 0x028 -#define S5P_AR_FAULT_ADDR 0x02C -#define S5P_DEFAULT_SLAVE_ADDR 0x030 - -#endif /* __ASM_ARCH_REGS_SYSMMU_H */ diff --git a/arch/arm/mach-exynos/include/mach/sysmmu.h b/arch/arm/mach-exynos/include/mach/sysmmu.h index 6a5fbb534e82..998daf2add92 100644 --- a/arch/arm/mach-exynos/include/mach/sysmmu.h +++ b/arch/arm/mach-exynos/include/mach/sysmmu.h @@ -1,46 +1,66 @@ -/* linux/arch/arm/mach-exynos4/include/mach/sysmmu.h - * - * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. +/* + * Copyright (c) 2011-2012 Samsung Electronics Co., Ltd. * http://www.samsung.com * - * Samsung sysmmu driver for EXYNOS4 + * EXYNOS - System MMU support * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARM_ARCH_SYSMMU_H -#define __ASM_ARM_ARCH_SYSMMU_H __FILE__ - -enum exynos4_sysmmu_ips { - SYSMMU_MDMA, - SYSMMU_SSS, - SYSMMU_FIMC0, - SYSMMU_FIMC1, - SYSMMU_FIMC2, - SYSMMU_FIMC3, - SYSMMU_JPEG, - SYSMMU_FIMD0, - SYSMMU_FIMD1, - SYSMMU_PCIe, - SYSMMU_G2D, - SYSMMU_ROTATOR, - SYSMMU_MDMA2, - SYSMMU_TV, - SYSMMU_MFC_L, - SYSMMU_MFC_R, - EXYNOS4_SYSMMU_TOTAL_IPNUM, + */ + +#ifndef _ARM_MACH_EXYNOS_SYSMMU_H_ +#define _ARM_MACH_EXYNOS_SYSMMU_H_ + +struct sysmmu_platform_data { + char *dbgname; + /* comma(,) separated list of clock names for clock gating */ + char *clockname; }; -#define S5P_SYSMMU_TOTAL_IPNUM EXYNOS4_SYSMMU_TOTAL_IPNUM +#define SYSMMU_DEVNAME_BASE "exynos-sysmmu" + +#define SYSMMU_CLOCK_NAME "sysmmu" +#define SYSMMU_CLOCK_NAME2 "sysmmu_mc" + +#ifdef CONFIG_EXYNOS_DEV_SYSMMU +#include <linux/device.h> +struct platform_device; + +#define SYSMMU_PLATDEV(ipname) exynos_device_sysmmu_##ipname + +extern struct platform_device SYSMMU_PLATDEV(mfc_l); +extern struct platform_device SYSMMU_PLATDEV(mfc_r); +extern struct platform_device SYSMMU_PLATDEV(tv); +extern struct platform_device SYSMMU_PLATDEV(jpeg); +extern struct platform_device SYSMMU_PLATDEV(rot); +extern struct platform_device SYSMMU_PLATDEV(fimc0); +extern struct platform_device SYSMMU_PLATDEV(fimc1); +extern struct platform_device SYSMMU_PLATDEV(fimc2); +extern struct platform_device SYSMMU_PLATDEV(fimc3); +extern struct platform_device SYSMMU_PLATDEV(gsc0); +extern struct platform_device SYSMMU_PLATDEV(gsc1); +extern struct platform_device SYSMMU_PLATDEV(gsc2); +extern struct platform_device SYSMMU_PLATDEV(gsc3); +extern struct platform_device SYSMMU_PLATDEV(isp); +extern struct platform_device SYSMMU_PLATDEV(fimd0); +extern struct platform_device SYSMMU_PLATDEV(fimd1); +extern struct platform_device SYSMMU_PLATDEV(camif0); +extern struct platform_device SYSMMU_PLATDEV(camif1); +extern struct platform_device SYSMMU_PLATDEV(2d); -extern const char *sysmmu_ips_name[EXYNOS4_SYSMMU_TOTAL_IPNUM]; +#ifdef CONFIG_IOMMU_API +static inline void platform_set_sysmmu( + struct device *sysmmu, struct device *dev) +{ + dev->archdata.iommu = sysmmu; +} +#endif -typedef enum exynos4_sysmmu_ips sysmmu_ips; +#else /* !CONFIG_EXYNOS_DEV_SYSMMU */ +#define platform_set_sysmmu(dev, sysmmu) do { } while (0) +#endif -void sysmmu_clk_init(struct device *dev, sysmmu_ips ips); -void sysmmu_clk_enable(sysmmu_ips ips); -void sysmmu_clk_disable(sysmmu_ips ips); +#define SYSMMU_CLOCK_DEVNAME(ipname, id) (SYSMMU_DEVNAME_BASE "." #id) -#endif /* __ASM_ARM_ARCH_SYSMMU_H */ +#endif /* _ARM_MACH_EXYNOS_SYSMMU_H_ */ diff --git a/arch/arm/mach-exynos/mach-armlex4210.c b/arch/arm/mach-exynos/mach-armlex4210.c index fed7116418eb..372e33196e8a 100644 --- a/arch/arm/mach-exynos/mach-armlex4210.c +++ b/arch/arm/mach-exynos/mach-armlex4210.c @@ -147,7 +147,6 @@ static struct platform_device *armlex4210_devices[] __initdata = { &s3c_device_hsmmc3, &s3c_device_rtc, &s3c_device_wdt, - &exynos4_device_sysmmu, &samsung_asoc_dma, &armlex4210_smsc911x, &exynos4_device_ahci, diff --git a/arch/arm/mach-exynos/mach-smdkv310.c b/arch/arm/mach-exynos/mach-smdkv310.c index 5af96064ca51..a8c7656b1fce 100644 --- a/arch/arm/mach-exynos/mach-smdkv310.c +++ b/arch/arm/mach-exynos/mach-smdkv310.c @@ -295,7 +295,6 @@ static struct platform_device *smdkv310_devices[] __initdata = { &s5p_device_mfc_l, &s5p_device_mfc_r, &exynos4_device_spdif, - &exynos4_device_sysmmu, &samsung_asoc_dma, &samsung_asoc_idma, &s5p_device_fimd0, diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig index d0f2546706ca..6a113a9bb87a 100644 --- a/arch/arm/mach-tegra/Kconfig +++ b/arch/arm/mach-tegra/Kconfig @@ -50,6 +50,14 @@ config TEGRA_PCI depends on ARCH_TEGRA_2x_SOC select PCI +config TEGRA_AHB + bool "Enable AHB driver for NVIDIA Tegra SoCs" + default y + help + Adds AHB configuration functionality for NVIDIA Tegra SoCs, + which controls AHB bus master arbitration and some + perfomance parameters(priority, prefech size). + comment "Tegra board type" config MACH_HARMONY @@ -111,7 +119,7 @@ config MACH_VENTANA Support for the nVidia Ventana development platform choice - prompt "Low-level debug console UART" + prompt "Default low-level debug console UART" default TEGRA_DEBUG_UART_NONE config TEGRA_DEBUG_UART_NONE @@ -134,6 +142,33 @@ config TEGRA_DEBUG_UARTE endchoice +choice + prompt "Automatic low-level debug console UART" + default TEGRA_DEBUG_UART_AUTO_NONE + +config TEGRA_DEBUG_UART_AUTO_NONE + bool "None" + +config TEGRA_DEBUG_UART_AUTO_ODMDATA + bool "Via ODMDATA" + help + Automatically determines which UART to use for low-level debug based + on the ODMDATA value. This value is part of the BCT, and is written + to the boot memory device using nvflash, or other flashing tool. + When bits 19:18 are 3, then bits 17:15 indicate which UART to use; + 0/1/2/3/4 are UART A/B/C/D/E. + +config TEGRA_DEBUG_UART_AUTO_SCRATCH + bool "Via UART scratch register" + help + Automatically determines which UART to use for low-level debug based + on the UART scratch register value. Some bootloaders put ASCII 'D' + in this register when they initialize their own console UART output. + Using this option allows the kernel to automatically pick the same + UART. + +endchoice + config TEGRA_SYSTEM_DMA bool "Enable system DMA driver for NVIDIA Tegra SoCs" default y diff --git a/arch/arm/mach-tegra/board-dt-tegra30.c b/arch/arm/mach-tegra/board-dt-tegra30.c index 5f7c03e972f3..d96dae0b4aa7 100644 --- a/arch/arm/mach-tegra/board-dt-tegra30.c +++ b/arch/arm/mach-tegra/board-dt-tegra30.c @@ -51,12 +51,22 @@ struct of_dev_auxdata tegra30_auxdata_lookup[] __initdata = { OF_DEV_AUXDATA("nvidia,tegra20-i2c", 0x7000C500, "tegra-i2c.2", NULL), OF_DEV_AUXDATA("nvidia,tegra20-i2c", 0x7000C700, "tegra-i2c.3", NULL), OF_DEV_AUXDATA("nvidia,tegra20-i2c", 0x7000D000, "tegra-i2c.4", NULL), + OF_DEV_AUXDATA("nvidia,tegra30-ahub", 0x70080000, "tegra30-ahub", NULL), {} }; static __initdata struct tegra_clk_init_table tegra_dt_clk_init_table[] = { /* name parent rate enabled */ { "uarta", "pll_p", 408000000, true }, + { "pll_a", "pll_p_out1", 564480000, true }, + { "pll_a_out0", "pll_a", 11289600, true }, + { "extern1", "pll_a_out0", 0, true }, + { "clk_out_1", "extern1", 0, true }, + { "i2s0", "pll_a_out0", 11289600, false}, + { "i2s1", "pll_a_out0", 11289600, false}, + { "i2s2", "pll_a_out0", 11289600, false}, + { "i2s3", "pll_a_out0", 11289600, false}, + { "i2s4", "pll_a_out0", 11289600, false}, { NULL, NULL, 0, 0}, }; diff --git a/arch/arm/mach-tegra/board-paz00.c b/arch/arm/mach-tegra/board-paz00.c index d0735c70d688..55a1e6ccf4a2 100644 --- a/arch/arm/mach-tegra/board-paz00.c +++ b/arch/arm/mach-tegra/board-paz00.c @@ -162,6 +162,8 @@ static void paz00_i2c_init(void) static void paz00_usb_init(void) { + tegra_ehci2_ulpi_phy_config.reset_gpio = TEGRA_ULPI_RST; + platform_device_register(&tegra_ehci2_device); platform_device_register(&tegra_ehci3_device); } @@ -179,7 +181,6 @@ static __initdata struct tegra_clk_init_table paz00_clk_init_table[] = { { "uarta", "pll_p", 216000000, true }, { "uartc", "pll_p", 216000000, true }, - { "pll_p_out4", "pll_p", 24000000, true }, { "usbd", "clk_m", 12000000, false }, { "usb2", "clk_m", 12000000, false }, { "usb3", "clk_m", 12000000, false }, diff --git a/arch/arm/mach-tegra/board-trimslice.c b/arch/arm/mach-tegra/board-trimslice.c index bc59b379c6fe..832fa931c710 100644 --- a/arch/arm/mach-tegra/board-trimslice.c +++ b/arch/arm/mach-tegra/board-trimslice.c @@ -118,6 +118,8 @@ static void trimslice_usb_init(void) pdata = tegra_ehci1_device.dev.platform_data; pdata->vbus_gpio = TRIMSLICE_GPIO_USB1_MODE; + tegra_ehci2_ulpi_phy_config.reset_gpio = TEGRA_GPIO_PV0; + platform_device_register(&tegra_ehci3_device); platform_device_register(&tegra_ehci2_device); platform_device_register(&tegra_ehci1_device); diff --git a/arch/arm/mach-tegra/common.c b/arch/arm/mach-tegra/common.c index 22df10fb9972..2d80566b5383 100644 --- a/arch/arm/mach-tegra/common.c +++ b/arch/arm/mach-tegra/common.c @@ -82,10 +82,12 @@ static __initdata struct tegra_clk_init_table tegra20_clk_init_table[] = { { "pll_p_out1", "pll_p", 28800000, true }, { "pll_p_out2", "pll_p", 48000000, true }, { "pll_p_out3", "pll_p", 72000000, true }, - { "pll_p_out4", "pll_p", 108000000, true }, - { "sclk", "pll_p_out4", 108000000, true }, - { "hclk", "sclk", 108000000, true }, - { "pclk", "hclk", 54000000, true }, + { "pll_p_out4", "pll_p", 24000000, true }, + { "pll_c", "clk_m", 600000000, true }, + { "pll_c_out1", "pll_c", 120000000, true }, + { "sclk", "pll_c_out1", 120000000, true }, + { "hclk", "sclk", 120000000, true }, + { "pclk", "hclk", 60000000, true }, { "csite", NULL, 0, true }, { "emc", NULL, 0, true }, { "cpu", NULL, 0, true }, @@ -93,6 +95,17 @@ static __initdata struct tegra_clk_init_table tegra20_clk_init_table[] = { }; #endif +#ifdef CONFIG_ARCH_TEGRA_3x_SOC +static __initdata struct tegra_clk_init_table tegra30_clk_init_table[] = { + /* name parent rate enabled */ + { "clk_m", NULL, 0, true }, + { "pll_p", "clk_m", 408000000, true }, + { "pll_p_out1", "pll_p", 9600000, true }, + { NULL, NULL, 0, 0}, +}; +#endif + + static void __init tegra_init_cache(u32 tag_latency, u32 data_latency) { #ifdef CONFIG_CACHE_L2X0 @@ -127,6 +140,7 @@ void __init tegra30_init_early(void) { tegra_init_fuse(); tegra30_init_clocks(); + tegra_clk_init_from_table(tegra30_clk_init_table); tegra_init_cache(0x441, 0x551); tegra_pmc_init(); tegra_powergate_init(); diff --git a/arch/arm/mach-tegra/devices.c b/arch/arm/mach-tegra/devices.c index 2d8dfa2faf8f..c70e65ffa36b 100644 --- a/arch/arm/mach-tegra/devices.c +++ b/arch/arm/mach-tegra/devices.c @@ -439,9 +439,8 @@ static struct resource tegra_usb3_resources[] = { }, }; -static struct tegra_ulpi_config tegra_ehci2_ulpi_phy_config = { - /* All existing boards use GPIO PV0 for phy reset */ - .reset_gpio = TEGRA_GPIO_PV0, +struct tegra_ulpi_config tegra_ehci2_ulpi_phy_config = { + .reset_gpio = -1, .clk = "cdev2", }; diff --git a/arch/arm/mach-tegra/devices.h b/arch/arm/mach-tegra/devices.h index 138c642e59f4..4f5052726495 100644 --- a/arch/arm/mach-tegra/devices.h +++ b/arch/arm/mach-tegra/devices.h @@ -22,6 +22,10 @@ #include <linux/platform_device.h> #include <linux/platform_data/tegra_usb.h> +#include <mach/usb_phy.h> + +extern struct tegra_ulpi_config tegra_ehci2_ulpi_phy_config; + extern struct tegra_ehci_platform_data tegra_ehci1_pdata; extern struct tegra_ehci_platform_data tegra_ehci2_pdata; extern struct tegra_ehci_platform_data tegra_ehci3_pdata; diff --git a/arch/arm/mach-tegra/include/mach/tegra-ahb.h b/arch/arm/mach-tegra/include/mach/tegra-ahb.h new file mode 100644 index 000000000000..e0f8c84b1d8c --- /dev/null +++ b/arch/arm/mach-tegra/include/mach/tegra-ahb.h @@ -0,0 +1,19 @@ +/* + * Copyright (c) 2012, NVIDIA CORPORATION. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + */ + +#ifndef __MACH_TEGRA_AHB_H__ +#define __MACH_TEGRA_AHB_H__ + +extern int tegra_ahb_enable_smmu(struct device_node *ahb); + +#endif /* __MACH_TEGRA_AHB_H__ */ diff --git a/arch/arm/mach-tegra/include/mach/uncompress.h b/arch/arm/mach-tegra/include/mach/uncompress.h index 5a440f315e57..937c4c50219e 100644 --- a/arch/arm/mach-tegra/include/mach/uncompress.h +++ b/arch/arm/mach-tegra/include/mach/uncompress.h @@ -63,52 +63,86 @@ static inline void save_uart_address(void) buf[0] = 0; } -/* - * Setup before decompression. This is where we do UART selection for - * earlyprintk and init the uart_base register. - */ -static inline void arch_decomp_setup(void) +static const struct { + u32 base; + u32 reset_reg; + u32 clock_reg; + u32 bit; +} uarts[] = { + { + TEGRA_UARTA_BASE, + TEGRA_CLK_RESET_BASE + 0x04, + TEGRA_CLK_RESET_BASE + 0x10, + 6, + }, + { + TEGRA_UARTB_BASE, + TEGRA_CLK_RESET_BASE + 0x04, + TEGRA_CLK_RESET_BASE + 0x10, + 7, + }, + { + TEGRA_UARTC_BASE, + TEGRA_CLK_RESET_BASE + 0x08, + TEGRA_CLK_RESET_BASE + 0x14, + 23, + }, + { + TEGRA_UARTD_BASE, + TEGRA_CLK_RESET_BASE + 0x0c, + TEGRA_CLK_RESET_BASE + 0x18, + 1, + }, + { + TEGRA_UARTE_BASE, + TEGRA_CLK_RESET_BASE + 0x0c, + TEGRA_CLK_RESET_BASE + 0x18, + 2, + }, +}; + +static inline bool uart_clocked(int i) +{ + if (*(u8 *)uarts[i].reset_reg & BIT(uarts[i].bit)) + return false; + + if (!(*(u8 *)uarts[i].clock_reg & BIT(uarts[i].bit))) + return false; + + return true; +} + +#ifdef CONFIG_TEGRA_DEBUG_UART_AUTO_ODMDATA +int auto_odmdata(void) +{ + volatile u32 *pmc = (volatile u32 *)TEGRA_PMC_BASE; + u32 odmdata = pmc[0xa0 / 4]; + + /* + * Bits 19:18 are the console type: 0=default, 1=none, 2==DCC, 3==UART + * Some boards apparently swap the last two values, but we don't have + * any way of catering for that here, so we just accept either. If this + * doesn't make sense for your board, just don't enable this feature. + * + * Bits 17:15 indicate the UART to use, 0/1/2/3/4 are UART A/B/C/D/E. + */ + + switch ((odmdata >> 18) & 3) { + case 2: + case 3: + break; + default: + return -1; + } + + return (odmdata >> 15) & 7; +} +#endif + +#ifdef CONFIG_TEGRA_DEBUG_UART_AUTO_SCRATCH +int auto_scratch(void) { - static const struct { - u32 base; - u32 reset_reg; - u32 clock_reg; - u32 bit; - } uarts[] = { - { - TEGRA_UARTA_BASE, - TEGRA_CLK_RESET_BASE + 0x04, - TEGRA_CLK_RESET_BASE + 0x10, - 6, - }, - { - TEGRA_UARTB_BASE, - TEGRA_CLK_RESET_BASE + 0x04, - TEGRA_CLK_RESET_BASE + 0x10, - 7, - }, - { - TEGRA_UARTC_BASE, - TEGRA_CLK_RESET_BASE + 0x08, - TEGRA_CLK_RESET_BASE + 0x14, - 23, - }, - { - TEGRA_UARTD_BASE, - TEGRA_CLK_RESET_BASE + 0x0c, - TEGRA_CLK_RESET_BASE + 0x18, - 1, - }, - { - TEGRA_UARTE_BASE, - TEGRA_CLK_RESET_BASE + 0x0c, - TEGRA_CLK_RESET_BASE + 0x18, - 2, - }, - }; int i; - volatile u32 *apb_misc = (volatile u32 *)TEGRA_APB_MISC_BASE; - u32 chip, div; /* * Look for the first UART that: @@ -125,20 +159,60 @@ static inline void arch_decomp_setup(void) * back to what's specified in TEGRA_DEBUG_UART_BASE. */ for (i = 0; i < ARRAY_SIZE(uarts); i++) { - if (*(u8 *)uarts[i].reset_reg & BIT(uarts[i].bit)) - continue; - - if (!(*(u8 *)uarts[i].clock_reg & BIT(uarts[i].bit))) + if (!uart_clocked(i)) continue; uart = (volatile u8 *)uarts[i].base; if (uart[UART_SCR << DEBUG_UART_SHIFT] != 'D') continue; - break; + return i; } - if (i == ARRAY_SIZE(uarts)) - uart = (volatile u8 *)TEGRA_DEBUG_UART_BASE; + + return -1; +} +#endif + +/* + * Setup before decompression. This is where we do UART selection for + * earlyprintk and init the uart_base register. + */ +static inline void arch_decomp_setup(void) +{ + int uart_id, auto_uart_id; + volatile u32 *apb_misc = (volatile u32 *)TEGRA_APB_MISC_BASE; + u32 chip, div; + +#if defined(CONFIG_TEGRA_DEBUG_UARTA) + uart_id = 0; +#elif defined(CONFIG_TEGRA_DEBUG_UARTB) + uart_id = 1; +#elif defined(CONFIG_TEGRA_DEBUG_UARTC) + uart_id = 2; +#elif defined(CONFIG_TEGRA_DEBUG_UARTD) + uart_id = 3; +#elif defined(CONFIG_TEGRA_DEBUG_UARTE) + uart_id = 4; +#else + uart_id = -1; +#endif + +#if defined(CONFIG_TEGRA_DEBUG_UART_AUTO_ODMDATA) + auto_uart_id = auto_odmdata(); +#elif defined(CONFIG_TEGRA_DEBUG_UART_AUTO_SCRATCH) + auto_uart_id = auto_scratch(); +#else + auto_uart_id = -1; +#endif + if (auto_uart_id != -1) + uart_id = auto_uart_id; + + if (uart_id < 0 || uart_id >= ARRAY_SIZE(uarts) || + !uart_clocked(uart_id)) + uart = NULL; + else + uart = (volatile u8 *)uarts[uart_id].base; + save_uart_address(); if (uart == NULL) return; diff --git a/arch/arm/mach-tegra/include/mach/usb_phy.h b/arch/arm/mach-tegra/include/mach/usb_phy.h index de1a0f602b28..935ce9f65590 100644 --- a/arch/arm/mach-tegra/include/mach/usb_phy.h +++ b/arch/arm/mach-tegra/include/mach/usb_phy.h @@ -61,8 +61,8 @@ struct tegra_usb_phy { struct usb_phy *ulpi; }; -struct tegra_usb_phy *tegra_usb_phy_open(int instance, void __iomem *regs, - void *config, enum tegra_usb_phy_mode phy_mode); +struct tegra_usb_phy *tegra_usb_phy_open(struct device *dev, int instance, + void __iomem *regs, void *config, enum tegra_usb_phy_mode phy_mode); int tegra_usb_phy_power_on(struct tegra_usb_phy *phy); diff --git a/arch/arm/mach-tegra/tegra2_clocks.c b/arch/arm/mach-tegra/tegra2_clocks.c index bae09b859891..b59315ce3691 100644 --- a/arch/arm/mach-tegra/tegra2_clocks.c +++ b/arch/arm/mach-tegra/tegra2_clocks.c @@ -1486,6 +1486,10 @@ static struct clk tegra_clk_m = { }; static struct clk_pll_freq_table tegra_pll_c_freq_table[] = { + { 12000000, 600000000, 600, 12, 1, 8 }, + { 13000000, 600000000, 600, 13, 1, 8 }, + { 19200000, 600000000, 500, 16, 1, 6 }, + { 26000000, 600000000, 600, 26, 1, 8 }, { 0, 0, 0, 0, 0, 0 }, }; diff --git a/arch/arm/mach-tegra/tegra30_clocks.c b/arch/arm/mach-tegra/tegra30_clocks.c index 6d08b53f92d2..e33fe4b14a2a 100644 --- a/arch/arm/mach-tegra/tegra30_clocks.c +++ b/arch/arm/mach-tegra/tegra30_clocks.c @@ -3015,6 +3015,15 @@ struct clk_duplicate tegra_clk_duplicates[] = { CLK_DUPLICATE("sbc6", "spi_slave_tegra.5", NULL), CLK_DUPLICATE("twd", "smp_twd", NULL), CLK_DUPLICATE("vcp", "nvavp", "vcp"), + CLK_DUPLICATE("i2s0", NULL, "i2s0"), + CLK_DUPLICATE("i2s1", NULL, "i2s1"), + CLK_DUPLICATE("i2s2", NULL, "i2s2"), + CLK_DUPLICATE("i2s3", NULL, "i2s3"), + CLK_DUPLICATE("i2s4", NULL, "i2s4"), + CLK_DUPLICATE("dam0", NULL, "dam0"), + CLK_DUPLICATE("dam1", NULL, "dam1"), + CLK_DUPLICATE("dam2", NULL, "dam2"), + CLK_DUPLICATE("spdif_in", NULL, "spdif_in"), }; struct clk *tegra_ptr_clks[] = { diff --git a/arch/arm/mach-tegra/usb_phy.c b/arch/arm/mach-tegra/usb_phy.c index d71d2fed6721..54e353c8e304 100644 --- a/arch/arm/mach-tegra/usb_phy.c +++ b/arch/arm/mach-tegra/usb_phy.c @@ -26,6 +26,7 @@ #include <linux/platform_device.h> #include <linux/io.h> #include <linux/gpio.h> +#include <linux/of_gpio.h> #include <linux/usb/otg.h> #include <linux/usb/ulpi.h> #include <asm/mach-types.h> @@ -654,8 +655,8 @@ static void ulpi_phy_power_off(struct tegra_usb_phy *phy) clk_disable(phy->clk); } -struct tegra_usb_phy *tegra_usb_phy_open(int instance, void __iomem *regs, - void *config, enum tegra_usb_phy_mode phy_mode) +struct tegra_usb_phy *tegra_usb_phy_open(struct device *dev, int instance, + void __iomem *regs, void *config, enum tegra_usb_phy_mode phy_mode) { struct tegra_usb_phy *phy; struct tegra_ulpi_config *ulpi_config; @@ -711,6 +712,16 @@ struct tegra_usb_phy *tegra_usb_phy_open(int instance, void __iomem *regs, err = -ENXIO; goto err1; } + if (!gpio_is_valid(ulpi_config->reset_gpio)) + ulpi_config->reset_gpio = + of_get_named_gpio(dev->of_node, + "nvidia,phy-reset-gpio", 0); + if (!gpio_is_valid(ulpi_config->reset_gpio)) { + pr_err("%s: invalid reset gpio: %d\n", __func__, + ulpi_config->reset_gpio); + err = -EINVAL; + goto err1; + } gpio_request(ulpi_config->reset_gpio, "ulpi_phy_reset_b"); gpio_direction_output(ulpi_config->reset_gpio, 0); phy->ulpi = otg_ulpi_create(&ulpi_viewport_access_ops, 0); diff --git a/arch/arm/plat-pxa/include/plat/pxa27x_keypad.h b/arch/arm/plat-pxa/include/plat/pxa27x_keypad.h index abcc36eb1242..5ce8d5e6ea51 100644 --- a/arch/arm/plat-pxa/include/plat/pxa27x_keypad.h +++ b/arch/arm/plat-pxa/include/plat/pxa27x_keypad.h @@ -44,6 +44,10 @@ struct pxa27x_keypad_platform_data { /* direct keys */ int direct_key_num; unsigned int direct_key_map[MAX_DIRECT_KEY_NUM]; + /* the key output may be low active */ + int direct_key_low_active; + /* give board a chance to choose the start direct key */ + unsigned int direct_key_mask; /* rotary encoders 0 */ int enable_rotary0; diff --git a/arch/arm/plat-s5p/Kconfig b/arch/arm/plat-s5p/Kconfig index 96bea3202304..2c1193c59928 100644 --- a/arch/arm/plat-s5p/Kconfig +++ b/arch/arm/plat-s5p/Kconfig @@ -50,14 +50,6 @@ config S5P_PM Common code for power management support on S5P and newer SoCs Note: Do not select this for S5P6440 and S5P6450. -comment "System MMU" - -config S5P_SYSTEM_MMU - bool "S5P SYSTEM MMU" - depends on ARCH_EXYNOS4 - help - Say Y here if you want to enable System MMU - config S5P_SLEEP bool help diff --git a/arch/arm/plat-s5p/Makefile b/arch/arm/plat-s5p/Makefile index 4bd824136659..4953d50707be 100644 --- a/arch/arm/plat-s5p/Makefile +++ b/arch/arm/plat-s5p/Makefile @@ -16,7 +16,6 @@ obj-y += clock.o obj-y += irq.o obj-$(CONFIG_S5P_EXT_INT) += irq-eint.o obj-$(CONFIG_S5P_GPIO_INT) += irq-gpioint.o -obj-$(CONFIG_S5P_SYSTEM_MMU) += sysmmu.o obj-$(CONFIG_S5P_PM) += pm.o irq-pm.o obj-$(CONFIG_S5P_SLEEP) += sleep.o obj-$(CONFIG_S5P_HRT) += s5p-time.o diff --git a/arch/arm/plat-s5p/sysmmu.c b/arch/arm/plat-s5p/sysmmu.c deleted file mode 100644 index c8bec9c7655d..000000000000 --- a/arch/arm/plat-s5p/sysmmu.c +++ /dev/null @@ -1,313 +0,0 @@ -/* linux/arch/arm/plat-s5p/sysmmu.c - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/io.h> -#include <linux/interrupt.h> -#include <linux/platform_device.h> -#include <linux/export.h> - -#include <asm/pgtable.h> - -#include <mach/map.h> -#include <mach/regs-sysmmu.h> -#include <plat/sysmmu.h> - -#define CTRL_ENABLE 0x5 -#define CTRL_BLOCK 0x7 -#define CTRL_DISABLE 0x0 - -static struct device *dev; - -static unsigned short fault_reg_offset[SYSMMU_FAULTS_NUM] = { - S5P_PAGE_FAULT_ADDR, - S5P_AR_FAULT_ADDR, - S5P_AW_FAULT_ADDR, - S5P_DEFAULT_SLAVE_ADDR, - S5P_AR_FAULT_ADDR, - S5P_AR_FAULT_ADDR, - S5P_AW_FAULT_ADDR, - S5P_AW_FAULT_ADDR -}; - -static char *sysmmu_fault_name[SYSMMU_FAULTS_NUM] = { - "PAGE FAULT", - "AR MULTI-HIT FAULT", - "AW MULTI-HIT FAULT", - "BUS ERROR", - "AR SECURITY PROTECTION FAULT", - "AR ACCESS PROTECTION FAULT", - "AW SECURITY PROTECTION FAULT", - "AW ACCESS PROTECTION FAULT" -}; - -static int (*fault_handlers[S5P_SYSMMU_TOTAL_IPNUM])( - enum S5P_SYSMMU_INTERRUPT_TYPE itype, - unsigned long pgtable_base, - unsigned long fault_addr); - -/* - * If adjacent 2 bits are true, the system MMU is enabled. - * The system MMU is disabled, otherwise. - */ -static unsigned long sysmmu_states; - -static inline void set_sysmmu_active(sysmmu_ips ips) -{ - sysmmu_states |= 3 << (ips * 2); -} - -static inline void set_sysmmu_inactive(sysmmu_ips ips) -{ - sysmmu_states &= ~(3 << (ips * 2)); -} - -static inline int is_sysmmu_active(sysmmu_ips ips) -{ - return sysmmu_states & (3 << (ips * 2)); -} - -static void __iomem *sysmmusfrs[S5P_SYSMMU_TOTAL_IPNUM]; - -static inline void sysmmu_block(sysmmu_ips ips) -{ - __raw_writel(CTRL_BLOCK, sysmmusfrs[ips] + S5P_MMU_CTRL); - dev_dbg(dev, "%s is blocked.\n", sysmmu_ips_name[ips]); -} - -static inline void sysmmu_unblock(sysmmu_ips ips) -{ - __raw_writel(CTRL_ENABLE, sysmmusfrs[ips] + S5P_MMU_CTRL); - dev_dbg(dev, "%s is unblocked.\n", sysmmu_ips_name[ips]); -} - -static inline void __sysmmu_tlb_invalidate(sysmmu_ips ips) -{ - __raw_writel(0x1, sysmmusfrs[ips] + S5P_MMU_FLUSH); - dev_dbg(dev, "TLB of %s is invalidated.\n", sysmmu_ips_name[ips]); -} - -static inline void __sysmmu_set_ptbase(sysmmu_ips ips, unsigned long pgd) -{ - if (unlikely(pgd == 0)) { - pgd = (unsigned long)ZERO_PAGE(0); - __raw_writel(0x20, sysmmusfrs[ips] + S5P_MMU_CFG); /* 4KB LV1 */ - } else { - __raw_writel(0x0, sysmmusfrs[ips] + S5P_MMU_CFG); /* 16KB LV1 */ - } - - __raw_writel(pgd, sysmmusfrs[ips] + S5P_PT_BASE_ADDR); - - dev_dbg(dev, "Page table base of %s is initialized with 0x%08lX.\n", - sysmmu_ips_name[ips], pgd); - __sysmmu_tlb_invalidate(ips); -} - -void sysmmu_set_fault_handler(sysmmu_ips ips, - int (*handler)(enum S5P_SYSMMU_INTERRUPT_TYPE itype, - unsigned long pgtable_base, - unsigned long fault_addr)) -{ - BUG_ON(!((ips >= SYSMMU_MDMA) && (ips < S5P_SYSMMU_TOTAL_IPNUM))); - fault_handlers[ips] = handler; -} - -static irqreturn_t s5p_sysmmu_irq(int irq, void *dev_id) -{ - /* SYSMMU is in blocked when interrupt occurred. */ - unsigned long base = 0; - sysmmu_ips ips = (sysmmu_ips)dev_id; - enum S5P_SYSMMU_INTERRUPT_TYPE itype; - - itype = (enum S5P_SYSMMU_INTERRUPT_TYPE) - __ffs(__raw_readl(sysmmusfrs[ips] + S5P_INT_STATUS)); - - BUG_ON(!((itype >= 0) && (itype < 8))); - - dev_alert(dev, "%s occurred by %s.\n", sysmmu_fault_name[itype], - sysmmu_ips_name[ips]); - - if (fault_handlers[ips]) { - unsigned long addr; - - base = __raw_readl(sysmmusfrs[ips] + S5P_PT_BASE_ADDR); - addr = __raw_readl(sysmmusfrs[ips] + fault_reg_offset[itype]); - - if (fault_handlers[ips](itype, base, addr)) { - __raw_writel(1 << itype, - sysmmusfrs[ips] + S5P_INT_CLEAR); - dev_notice(dev, "%s from %s is resolved." - " Retrying translation.\n", - sysmmu_fault_name[itype], sysmmu_ips_name[ips]); - } else { - base = 0; - } - } - - sysmmu_unblock(ips); - - if (!base) - dev_notice(dev, "%s from %s is not handled.\n", - sysmmu_fault_name[itype], sysmmu_ips_name[ips]); - - return IRQ_HANDLED; -} - -void s5p_sysmmu_set_tablebase_pgd(sysmmu_ips ips, unsigned long pgd) -{ - if (is_sysmmu_active(ips)) { - sysmmu_block(ips); - __sysmmu_set_ptbase(ips, pgd); - sysmmu_unblock(ips); - } else { - dev_dbg(dev, "%s is disabled. " - "Skipping initializing page table base.\n", - sysmmu_ips_name[ips]); - } -} - -void s5p_sysmmu_enable(sysmmu_ips ips, unsigned long pgd) -{ - if (!is_sysmmu_active(ips)) { - sysmmu_clk_enable(ips); - - __sysmmu_set_ptbase(ips, pgd); - - __raw_writel(CTRL_ENABLE, sysmmusfrs[ips] + S5P_MMU_CTRL); - - set_sysmmu_active(ips); - dev_dbg(dev, "%s is enabled.\n", sysmmu_ips_name[ips]); - } else { - dev_dbg(dev, "%s is already enabled.\n", sysmmu_ips_name[ips]); - } -} - -void s5p_sysmmu_disable(sysmmu_ips ips) -{ - if (is_sysmmu_active(ips)) { - __raw_writel(CTRL_DISABLE, sysmmusfrs[ips] + S5P_MMU_CTRL); - set_sysmmu_inactive(ips); - sysmmu_clk_disable(ips); - dev_dbg(dev, "%s is disabled.\n", sysmmu_ips_name[ips]); - } else { - dev_dbg(dev, "%s is already disabled.\n", sysmmu_ips_name[ips]); - } -} - -void s5p_sysmmu_tlb_invalidate(sysmmu_ips ips) -{ - if (is_sysmmu_active(ips)) { - sysmmu_block(ips); - __sysmmu_tlb_invalidate(ips); - sysmmu_unblock(ips); - } else { - dev_dbg(dev, "%s is disabled. " - "Skipping invalidating TLB.\n", sysmmu_ips_name[ips]); - } -} - -static int s5p_sysmmu_probe(struct platform_device *pdev) -{ - int i, ret; - struct resource *res, *mem; - - dev = &pdev->dev; - - for (i = 0; i < S5P_SYSMMU_TOTAL_IPNUM; i++) { - int irq; - - sysmmu_clk_init(dev, i); - sysmmu_clk_disable(i); - - res = platform_get_resource(pdev, IORESOURCE_MEM, i); - if (!res) { - dev_err(dev, "Failed to get the resource of %s.\n", - sysmmu_ips_name[i]); - ret = -ENODEV; - goto err_res; - } - - mem = request_mem_region(res->start, resource_size(res), - pdev->name); - if (!mem) { - dev_err(dev, "Failed to request the memory region of %s.\n", - sysmmu_ips_name[i]); - ret = -EBUSY; - goto err_res; - } - - sysmmusfrs[i] = ioremap(res->start, resource_size(res)); - if (!sysmmusfrs[i]) { - dev_err(dev, "Failed to ioremap() for %s.\n", - sysmmu_ips_name[i]); - ret = -ENXIO; - goto err_reg; - } - - irq = platform_get_irq(pdev, i); - if (irq <= 0) { - dev_err(dev, "Failed to get the IRQ resource of %s.\n", - sysmmu_ips_name[i]); - ret = -ENOENT; - goto err_map; - } - - if (request_irq(irq, s5p_sysmmu_irq, IRQF_DISABLED, - pdev->name, (void *)i)) { - dev_err(dev, "Failed to request IRQ for %s.\n", - sysmmu_ips_name[i]); - ret = -ENOENT; - goto err_map; - } - } - - return 0; - -err_map: - iounmap(sysmmusfrs[i]); -err_reg: - release_mem_region(mem->start, resource_size(mem)); -err_res: - return ret; -} - -static int s5p_sysmmu_remove(struct platform_device *pdev) -{ - return 0; -} -int s5p_sysmmu_runtime_suspend(struct device *dev) -{ - return 0; -} - -int s5p_sysmmu_runtime_resume(struct device *dev) -{ - return 0; -} - -const struct dev_pm_ops s5p_sysmmu_pm_ops = { - .runtime_suspend = s5p_sysmmu_runtime_suspend, - .runtime_resume = s5p_sysmmu_runtime_resume, -}; - -static struct platform_driver s5p_sysmmu_driver = { - .probe = s5p_sysmmu_probe, - .remove = s5p_sysmmu_remove, - .driver = { - .owner = THIS_MODULE, - .name = "s5p-sysmmu", - .pm = &s5p_sysmmu_pm_ops, - } -}; - -static int __init s5p_sysmmu_init(void) -{ - return platform_driver_register(&s5p_sysmmu_driver); -} -arch_initcall(s5p_sysmmu_init); diff --git a/arch/arm/plat-samsung/include/plat/devs.h b/arch/arm/plat-samsung/include/plat/devs.h index 2155d4af62a3..4067d1dd7f1c 100644 --- a/arch/arm/plat-samsung/include/plat/devs.h +++ b/arch/arm/plat-samsung/include/plat/devs.h @@ -133,7 +133,6 @@ extern struct platform_device exynos4_device_pcm1; extern struct platform_device exynos4_device_pcm2; extern struct platform_device exynos4_device_pd[]; extern struct platform_device exynos4_device_spdif; -extern struct platform_device exynos4_device_sysmmu; extern struct platform_device samsung_asoc_dma; extern struct platform_device samsung_asoc_idma; diff --git a/arch/arm/plat-samsung/include/plat/sysmmu.h b/arch/arm/plat-samsung/include/plat/sysmmu.h deleted file mode 100644 index 5fe8ee01a5ba..000000000000 --- a/arch/arm/plat-samsung/include/plat/sysmmu.h +++ /dev/null @@ -1,95 +0,0 @@ -/* linux/arch/arm/plat-samsung/include/plat/sysmmu.h - * - * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * Samsung System MMU driver for S5P platform - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __PLAT_SAMSUNG_SYSMMU_H -#define __PLAT_SAMSUNG_SYSMMU_H __FILE__ - -enum S5P_SYSMMU_INTERRUPT_TYPE { - SYSMMU_PAGEFAULT, - SYSMMU_AR_MULTIHIT, - SYSMMU_AW_MULTIHIT, - SYSMMU_BUSERROR, - SYSMMU_AR_SECURITY, - SYSMMU_AR_ACCESS, - SYSMMU_AW_SECURITY, - SYSMMU_AW_PROTECTION, /* 7 */ - SYSMMU_FAULTS_NUM -}; - -#ifdef CONFIG_S5P_SYSTEM_MMU - -#include <mach/sysmmu.h> - -/** - * s5p_sysmmu_enable() - enable system mmu of ip - * @ips: The ip connected system mmu. - * #pgd: Base physical address of the 1st level page table - * - * This function enable system mmu to transfer address - * from virtual address to physical address - */ -void s5p_sysmmu_enable(sysmmu_ips ips, unsigned long pgd); - -/** - * s5p_sysmmu_disable() - disable sysmmu mmu of ip - * @ips: The ip connected system mmu. - * - * This function disable system mmu to transfer address - * from virtual address to physical address - */ -void s5p_sysmmu_disable(sysmmu_ips ips); - -/** - * s5p_sysmmu_set_tablebase_pgd() - set page table base address to refer page table - * @ips: The ip connected system mmu. - * @pgd: The page table base address. - * - * This function set page table base address - * When system mmu transfer address from virtaul address to physical address, - * system mmu refer address information from page table - */ -void s5p_sysmmu_set_tablebase_pgd(sysmmu_ips ips, unsigned long pgd); - -/** - * s5p_sysmmu_tlb_invalidate() - flush all TLB entry in system mmu - * @ips: The ip connected system mmu. - * - * This function flush all TLB entry in system mmu - */ -void s5p_sysmmu_tlb_invalidate(sysmmu_ips ips); - -/** s5p_sysmmu_set_fault_handler() - Fault handler for System MMUs - * @itype: type of fault. - * @pgtable_base: the physical address of page table base. This is 0 if @ips is - * SYSMMU_BUSERROR. - * @fault_addr: the device (virtual) address that the System MMU tried to - * translated. This is 0 if @ips is SYSMMU_BUSERROR. - * Called when interrupt occurred by the System MMUs - * The device drivers of peripheral devices that has a System MMU can implement - * a fault handler to resolve address translation fault by System MMU. - * The meanings of return value and parameters are described below. - - * return value: non-zero if the fault is correctly resolved. - * zero if the fault is not handled. - */ -void s5p_sysmmu_set_fault_handler(sysmmu_ips ips, - int (*handler)(enum S5P_SYSMMU_INTERRUPT_TYPE itype, - unsigned long pgtable_base, - unsigned long fault_addr)); -#else -#define s5p_sysmmu_enable(ips, pgd) do { } while (0) -#define s5p_sysmmu_disable(ips) do { } while (0) -#define s5p_sysmmu_set_tablebase_pgd(ips, pgd) do { } while (0) -#define s5p_sysmmu_tlb_invalidate(ips) do { } while (0) -#define s5p_sysmmu_set_fault_handler(ips, handler) do { } while (0) -#endif -#endif /* __ASM_PLAT_SYSMMU_H */ diff --git a/arch/powerpc/boot/dts/mpc8569mds.dts b/arch/powerpc/boot/dts/mpc8569mds.dts index 7e283c891b7f..fe0d60935e9b 100644 --- a/arch/powerpc/boot/dts/mpc8569mds.dts +++ b/arch/powerpc/boot/dts/mpc8569mds.dts @@ -119,6 +119,7 @@ sdhc@2e000 { status = "disabled"; sdhci,1-bit-only; + bus-width = <1>; }; par_io@e0100 { |