diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2022-06-03 14:20:28 -0700 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2022-06-03 14:20:28 -0700 |
commit | 9af13088ab139ff1663e44e5746e152303cffbc7 (patch) | |
tree | b42a8698b59d13194dc0dd410508582ea4f80a4b /arch | |
parent | c6f2f3e2c80e975804360665d973211e4d9390cb (diff) | |
parent | 7036440eab3e2d47a775d4616909f8235488d714 (diff) |
Merge tag 'arm-multiplatform-5.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull yet more ARM multiplatform updates from Arnd Bergmann:
"This is the third and final bit of the multiplatform conversion for
ARMv5, finishing off OMAP1. One patch enables the common-clk
interface, and the other ones does the Kconfig change.
These were waiting on a few dependencies to trickle in for common-clk,
and the last one of those was in the USB tree"
* tag 'arm-multiplatform-5.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
ARM: omap1: enable multiplatform
ARM: OMAP1: clock: Convert to CCF
Diffstat (limited to 'arch')
-rw-r--r-- | arch/arm/Kconfig | 13 | ||||
-rw-r--r-- | arch/arm/configs/omap1_defconfig | 3 | ||||
-rw-r--r-- | arch/arm/mach-omap1/Kconfig | 16 | ||||
-rw-r--r-- | arch/arm/mach-omap1/clock.c | 693 | ||||
-rw-r--r-- | arch/arm/mach-omap1/clock.h | 139 | ||||
-rw-r--r-- | arch/arm/mach-omap1/clock_data.c | 483 | ||||
-rw-r--r-- | arch/arm/mach-omap1/hardware.h | 2 | ||||
-rw-r--r-- | arch/arm/mach-omap1/include/mach/uncompress.h | 117 | ||||
-rw-r--r-- | arch/arm/mach-omap1/io.c | 7 | ||||
-rw-r--r-- | arch/arm/mach-omap1/serial.c | 3 | ||||
-rw-r--r-- | arch/arm/mach-omap1/serial.h (renamed from arch/arm/mach-omap1/include/mach/serial.h) | 0 | ||||
-rw-r--r-- | arch/arm/mach-omap1/time.c | 5 |
12 files changed, 584 insertions, 897 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index f182f32145a8..7630ba9cb6cc 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -396,19 +396,6 @@ config ARCH_SA1100 help Support for StrongARM 11x0 based boards. -config ARCH_OMAP1 - bool "TI OMAP1" - depends on CPU_LITTLE_ENDIAN - select CLKSRC_MMIO - select FORCE_PCI if PCCARD - select GENERIC_IRQ_CHIP - select GPIOLIB - select HAVE_LEGACY_CLK - select IRQ_DOMAIN - select SPARSE_IRQ - help - Support for older TI OMAP1 (omap7xx, omap15xx or omap16xx) - endchoice menu "Multiple platform selection" diff --git a/arch/arm/configs/omap1_defconfig b/arch/arm/configs/omap1_defconfig index 3148567b66b6..14c17a218ec5 100644 --- a/arch/arm/configs/omap1_defconfig +++ b/arch/arm/configs/omap1_defconfig @@ -17,6 +17,9 @@ CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set +CONFIG_ARCH_MULTI_V4T=y +CONFIG_ARCH_MULTI_V5=y +# CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_OMAP=y CONFIG_ARCH_OMAP1=y CONFIG_OMAP_RESET_CLOCKS=y diff --git a/arch/arm/mach-omap1/Kconfig b/arch/arm/mach-omap1/Kconfig index d4b0cd91a4f9..0ac0567f721d 100644 --- a/arch/arm/mach-omap1/Kconfig +++ b/arch/arm/mach-omap1/Kconfig @@ -1,4 +1,16 @@ # SPDX-License-Identifier: GPL-2.0-only +menuconfig ARCH_OMAP1 + bool "TI OMAP1" + depends on ARCH_MULTI_V4T || ARCH_MULTI_V5 + depends on CPU_LITTLE_ENDIAN + select ARCH_HAS_HOLES_MEMORYMODEL + select ARCH_OMAP + select CLKSRC_MMIO + select FORCE_PCI if PCCARD + select GPIOLIB + help + Support for older TI OMAP1 (omap7xx, omap15xx or omap16xx) + if ARCH_OMAP1 menu "TI OMAP1 specific features" @@ -6,23 +18,27 @@ menu "TI OMAP1 specific features" comment "OMAP Core Type" config ARCH_OMAP730 + depends on ARCH_MULTI_V5 bool "OMAP730 Based System" select ARCH_OMAP_OTG select CPU_ARM926T select OMAP_MPU_TIMER config ARCH_OMAP850 + depends on ARCH_MULTI_V5 bool "OMAP850 Based System" select ARCH_OMAP_OTG select CPU_ARM926T config ARCH_OMAP15XX + depends on ARCH_MULTI_V4T default y bool "OMAP15xx Based System" select CPU_ARM925T select OMAP_MPU_TIMER config ARCH_OMAP16XX + depends on ARCH_MULTI_V5 bool "OMAP16xx Based System" select ARCH_OMAP_OTG select CPU_ARM926T diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c index e5bd4d3b742d..83381e23fab9 100644 --- a/arch/arm/mach-omap1/clock.c +++ b/arch/arm/mach-omap1/clock.c @@ -16,7 +16,9 @@ #include <linux/io.h> #include <linux/clk.h> #include <linux/clkdev.h> +#include <linux/clk-provider.h> #include <linux/soc/ti/omap1-io.h> +#include <linux/spinlock.h> #include <asm/mach-types.h> @@ -28,33 +30,37 @@ #include "sram.h" __u32 arm_idlect1_mask; -struct clk *api_ck_p, *ck_dpll1_p, *ck_ref_p; +/* provide direct internal access (not via clk API) to some clocks */ +struct omap1_clk *api_ck_p, *ck_dpll1_p, *ck_ref_p; -static LIST_HEAD(clocks); -static DEFINE_MUTEX(clocks_mutex); -static DEFINE_SPINLOCK(clockfw_lock); +/* protect registeres shared among clk_enable/disable() and clk_set_rate() operations */ +static DEFINE_SPINLOCK(arm_ckctl_lock); +static DEFINE_SPINLOCK(arm_idlect2_lock); +static DEFINE_SPINLOCK(mod_conf_ctrl_0_lock); +static DEFINE_SPINLOCK(mod_conf_ctrl_1_lock); +static DEFINE_SPINLOCK(swd_clk_div_ctrl_sel_lock); /* * Omap1 specific clock functions */ -unsigned long omap1_uart_recalc(struct clk *clk) +unsigned long omap1_uart_recalc(struct omap1_clk *clk, unsigned long p_rate) { unsigned int val = __raw_readl(clk->enable_reg); return val & 1 << clk->enable_bit ? 48000000 : 12000000; } -unsigned long omap1_sossi_recalc(struct clk *clk) +unsigned long omap1_sossi_recalc(struct omap1_clk *clk, unsigned long p_rate) { u32 div = omap_readl(MOD_CONF_CTRL_1); div = (div >> 17) & 0x7; div++; - return clk->parent->rate / div; + return p_rate / div; } -static void omap1_clk_allow_idle(struct clk *clk) +static void omap1_clk_allow_idle(struct omap1_clk *clk) { struct arm_idlect1_clk * iclk = (struct arm_idlect1_clk *)clk; @@ -65,7 +71,7 @@ static void omap1_clk_allow_idle(struct clk *clk) arm_idlect1_mask |= 1 << iclk->idlect_shift; } -static void omap1_clk_deny_idle(struct clk *clk) +static void omap1_clk_deny_idle(struct omap1_clk *clk) { struct arm_idlect1_clk * iclk = (struct arm_idlect1_clk *)clk; @@ -129,7 +135,7 @@ static __u16 verify_ckctl_value(__u16 newval) return newval; } -static int calc_dsor_exp(struct clk *clk, unsigned long rate) +static int calc_dsor_exp(unsigned long rate, unsigned long realrate) { /* Note: If target frequency is too low, this function will return 4, * which is invalid value. Caller must check for this value and act @@ -142,15 +148,11 @@ static int calc_dsor_exp(struct clk *clk, unsigned long rate) * DSP_CK >= TC_CK * DSPMMU_CK >= TC_CK */ - unsigned long realrate; - struct clk * parent; unsigned dsor_exp; - parent = clk->parent; - if (unlikely(parent == NULL)) + if (unlikely(realrate == 0)) return -EIO; - realrate = parent->rate; for (dsor_exp=0; dsor_exp<4; dsor_exp++) { if (realrate <= rate) break; @@ -161,16 +163,50 @@ static int calc_dsor_exp(struct clk *clk, unsigned long rate) return dsor_exp; } -unsigned long omap1_ckctl_recalc(struct clk *clk) +unsigned long omap1_ckctl_recalc(struct omap1_clk *clk, unsigned long p_rate) { /* Calculate divisor encoded as 2-bit exponent */ int dsor = 1 << (3 & (omap_readw(ARM_CKCTL) >> clk->rate_offset)); - return clk->parent->rate / dsor; + /* update locally maintained rate, required by arm_ck for omap1_show_rates() */ + clk->rate = p_rate / dsor; + return clk->rate; } -unsigned long omap1_ckctl_recalc_dsp_domain(struct clk *clk) +static int omap1_clk_is_enabled(struct clk_hw *hw) { + struct omap1_clk *clk = to_omap1_clk(hw); + bool api_ck_was_enabled = true; + __u32 regval32; + int ret; + + if (!clk->ops) /* no gate -- always enabled */ + return 1; + + if (clk->ops == &clkops_dspck) { + api_ck_was_enabled = omap1_clk_is_enabled(&api_ck_p->hw); + if (!api_ck_was_enabled) + if (api_ck_p->ops->enable(api_ck_p) < 0) + return 0; + } + + if (clk->flags & ENABLE_REG_32BIT) + regval32 = __raw_readl(clk->enable_reg); + else + regval32 = __raw_readw(clk->enable_reg); + + ret = regval32 & (1 << clk->enable_bit); + + if (!api_ck_was_enabled) + api_ck_p->ops->disable(api_ck_p); + + return ret; +} + + +unsigned long omap1_ckctl_recalc_dsp_domain(struct omap1_clk *clk, unsigned long p_rate) +{ + bool api_ck_was_enabled; int dsor; /* Calculate divisor encoded as 2-bit exponent @@ -180,15 +216,18 @@ unsigned long omap1_ckctl_recalc_dsp_domain(struct clk *clk) * Note that DSP_CKCTL virt addr = phys addr, so * we must use __raw_readw() instead of omap_readw(). */ - omap1_clk_enable(api_ck_p); + api_ck_was_enabled = omap1_clk_is_enabled(&api_ck_p->hw); + if (!api_ck_was_enabled) + api_ck_p->ops->enable(api_ck_p); dsor = 1 << (3 & (__raw_readw(DSP_CKCTL) >> clk->rate_offset)); - omap1_clk_disable(api_ck_p); + if (!api_ck_was_enabled) + api_ck_p->ops->disable(api_ck_p); - return clk->parent->rate / dsor; + return p_rate / dsor; } /* MPU virtual clock functions */ -int omap1_select_table_rate(struct clk *clk, unsigned long rate) +int omap1_select_table_rate(struct omap1_clk *clk, unsigned long rate, unsigned long p_rate) { /* Find the highest supported frequency <= rate and switch to it */ struct mpu_rate * ptr; @@ -223,12 +262,12 @@ int omap1_select_table_rate(struct clk *clk, unsigned long rate) return 0; } -int omap1_clk_set_rate_dsp_domain(struct clk *clk, unsigned long rate) +int omap1_clk_set_rate_dsp_domain(struct omap1_clk *clk, unsigned long rate, unsigned long p_rate) { int dsor_exp; u16 regval; - dsor_exp = calc_dsor_exp(clk, rate); + dsor_exp = calc_dsor_exp(rate, p_rate); if (dsor_exp > 3) dsor_exp = -EINVAL; if (dsor_exp < 0) @@ -238,42 +277,51 @@ int omap1_clk_set_rate_dsp_domain(struct clk *clk, unsigned long rate) regval &= ~(3 << clk->rate_offset); regval |= dsor_exp << clk->rate_offset; __raw_writew(regval, DSP_CKCTL); - clk->rate = clk->parent->rate / (1 << dsor_exp); + clk->rate = p_rate / (1 << dsor_exp); return 0; } -long omap1_clk_round_rate_ckctl_arm(struct clk *clk, unsigned long rate) +long omap1_clk_round_rate_ckctl_arm(struct omap1_clk *clk, unsigned long rate, + unsigned long *p_rate) { - int dsor_exp = calc_dsor_exp(clk, rate); + int dsor_exp = calc_dsor_exp(rate, *p_rate); + if (dsor_exp < 0) return dsor_exp; if (dsor_exp > 3) dsor_exp = 3; - return clk->parent->rate / (1 << dsor_exp); + return *p_rate / (1 << dsor_exp); } -int omap1_clk_set_rate_ckctl_arm(struct clk *clk, unsigned long rate) +int omap1_clk_set_rate_ckctl_arm(struct omap1_clk *clk, unsigned long rate, unsigned long p_rate) { + unsigned long flags; int dsor_exp; u16 regval; - dsor_exp = calc_dsor_exp(clk, rate); + dsor_exp = calc_dsor_exp(rate, p_rate); if (dsor_exp > 3) dsor_exp = -EINVAL; if (dsor_exp < 0) return dsor_exp; + /* protect ARM_CKCTL register from concurrent access via clk_enable/disable() */ + spin_lock_irqsave(&arm_ckctl_lock, flags); + regval = omap_readw(ARM_CKCTL); regval &= ~(3 << clk->rate_offset); regval |= dsor_exp << clk->rate_offset; regval = verify_ckctl_value(regval); omap_writew(regval, ARM_CKCTL); - clk->rate = clk->parent->rate / (1 << dsor_exp); + clk->rate = p_rate / (1 << dsor_exp); + + spin_unlock_irqrestore(&arm_ckctl_lock, flags); + return 0; } -long omap1_round_to_table_rate(struct clk *clk, unsigned long rate) +long omap1_round_to_table_rate(struct omap1_clk *clk, unsigned long rate, unsigned long *p_rate) { /* Find the highest supported frequency <= rate */ struct mpu_rate * ptr; @@ -324,26 +372,40 @@ static unsigned calc_ext_dsor(unsigned long rate) } /* XXX Only needed on 1510 */ -int omap1_set_uart_rate(struct clk *clk, unsigned long rate) +long omap1_round_uart_rate(struct omap1_clk *clk, unsigned long rate, unsigned long *p_rate) { + return rate > 24000000 ? 48000000 : 12000000; +} + +int omap1_set_uart_rate(struct omap1_clk *clk, unsigned long rate, unsigned long p_rate) +{ + unsigned long flags; unsigned int val; - val = __raw_readl(clk->enable_reg); if (rate == 12000000) - val &= ~(1 << clk->enable_bit); + val = 0; else if (rate == 48000000) - val |= (1 << clk->enable_bit); + val = 1 << clk->enable_bit; else return -EINVAL; + + /* protect MOD_CONF_CTRL_0 register from concurrent access via clk_enable/disable() */ + spin_lock_irqsave(&mod_conf_ctrl_0_lock, flags); + + val |= __raw_readl(clk->enable_reg) & ~(1 << clk->enable_bit); __raw_writel(val, clk->enable_reg); + + spin_unlock_irqrestore(&mod_conf_ctrl_0_lock, flags); + clk->rate = rate; return 0; } /* External clock (MCLK & BCLK) functions */ -int omap1_set_ext_clk_rate(struct clk *clk, unsigned long rate) +int omap1_set_ext_clk_rate(struct omap1_clk *clk, unsigned long rate, unsigned long p_rate) { + unsigned long flags; unsigned dsor; __u16 ratio_bits; @@ -354,25 +416,53 @@ int omap1_set_ext_clk_rate(struct clk *clk, unsigned long rate) else ratio_bits = (dsor - 2) << 2; + /* protect SWD_CLK_DIV_CTRL_SEL register from concurrent access via clk_enable/disable() */ + spin_lock_irqsave(&swd_clk_div_ctrl_sel_lock, flags); + ratio_bits |= __raw_readw(clk->enable_reg) & ~0xfd; __raw_writew(ratio_bits, clk->enable_reg); + spin_unlock_irqrestore(&swd_clk_div_ctrl_sel_lock, flags); + return 0; } -int omap1_set_sossi_rate(struct clk *clk, unsigned long rate) +static int calc_div_sossi(unsigned long rate, unsigned long p_rate) { - u32 l; int div; - unsigned long p_rate; - p_rate = clk->parent->rate; /* Round towards slower frequency */ div = (p_rate + rate - 1) / rate; - div--; + + return --div; +} + +long omap1_round_sossi_rate(struct omap1_clk *clk, unsigned long rate, unsigned long *p_rate) +{ + int div; + + div = calc_div_sossi(rate, *p_rate); + if (div < 0) + div = 0; + else if (div > 7) + div = 7; + + return *p_rate / (div + 1); +} + +int omap1_set_sossi_rate(struct omap1_clk *clk, unsigned long rate, unsigned long p_rate) +{ + unsigned long flags; + u32 l; + int div; + + div = calc_div_sossi(rate, p_rate); if (div < 0 || div > 7) return -EINVAL; + /* protect MOD_CONF_CTRL_1 register from concurrent access via clk_enable/disable() */ + spin_lock_irqsave(&mod_conf_ctrl_1_lock, flags); + l = omap_readl(MOD_CONF_CTRL_1); l &= ~(7 << 17); l |= div << 17; @@ -380,15 +470,17 @@ int omap1_set_sossi_rate(struct clk *clk, unsigned long rate) clk->rate = p_rate / (div + 1); + spin_unlock_irqrestore(&mod_conf_ctrl_1_lock, flags); + return 0; } -long omap1_round_ext_clk_rate(struct clk *clk, unsigned long rate) +long omap1_round_ext_clk_rate(struct omap1_clk *clk, unsigned long rate, unsigned long *p_rate) { return 96000000 / calc_ext_dsor(rate); } -void omap1_init_ext_clk(struct clk *clk) +int omap1_init_ext_clk(struct omap1_clk *clk) { unsigned dsor; __u16 ratio_bits; @@ -404,59 +496,59 @@ void omap1_init_ext_clk(struct clk *clk) dsor = ratio_bits + 2; clk-> rate = 96000000 / dsor; + + return 0; } -int omap1_clk_enable(struct clk *clk) +static int omap1_clk_enable(struct clk_hw *hw) { + struct omap1_clk *clk = to_omap1_clk(hw), *parent = to_omap1_clk(clk_hw_get_parent(hw)); int ret = 0; - if (clk->usecount++ == 0) { - if (clk->parent) { - ret = omap1_clk_enable(clk->parent); - if (ret) - goto err; - - if (clk->flags & CLOCK_NO_IDLE_PARENT) - omap1_clk_deny_idle(clk->parent); - } + if (parent && clk->flags & CLOCK_NO_IDLE_PARENT) + omap1_clk_deny_idle(parent); + if (clk->ops && !(WARN_ON(!clk->ops->enable))) ret = clk->ops->enable(clk); - if (ret) { - if (clk->parent) - omap1_clk_disable(clk->parent); - goto err; - } - } - return ret; -err: - clk->usecount--; return ret; } -void omap1_clk_disable(struct clk *clk) +static void omap1_clk_disable(struct clk_hw *hw) { - if (clk->usecount > 0 && !(--clk->usecount)) { + struct omap1_clk *clk = to_omap1_clk(hw), *parent = to_omap1_clk(clk_hw_get_parent(hw)); + + if (clk->ops && !(WARN_ON(!clk->ops->disable))) clk->ops->disable(clk); - if (likely(clk->parent)) { - omap1_clk_disable(clk->parent); - if (clk->flags & CLOCK_NO_IDLE_PARENT) - omap1_clk_allow_idle(clk->parent); - } - } + + if (likely(parent) && clk->flags & CLOCK_NO_IDLE_PARENT) + omap1_clk_allow_idle(parent); } -static int omap1_clk_enable_generic(struct clk *clk) +static int omap1_clk_enable_generic(struct omap1_clk *clk) { + unsigned long flags; __u16 regval16; __u32 regval32; if (unlikely(clk->enable_reg == NULL)) { printk(KERN_ERR "clock.c: Enable for %s without enable code\n", - clk->name); + clk_hw_get_name(&clk->hw)); return -EINVAL; } + /* protect clk->enable_reg from concurrent access via clk_set_rate() */ + if (clk->enable_reg == OMAP1_IO_ADDRESS(ARM_CKCTL)) + spin_lock_irqsave(&arm_ckctl_lock, flags); + else if (clk->enable_reg == OMAP1_IO_ADDRESS(ARM_IDLECT2)) + spin_lock_irqsave(&arm_idlect2_lock, flags); + else if (clk->enable_reg == OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0)) + spin_lock_irqsave(&mod_conf_ctrl_0_lock, flags); + else if (clk->enable_reg == OMAP1_IO_ADDRESS(MOD_CONF_CTRL_1)) + spin_lock_irqsave(&mod_conf_ctrl_1_lock, flags); + else if (clk->enable_reg == OMAP1_IO_ADDRESS(SWD_CLK_DIV_CTRL_SEL)) + spin_lock_irqsave(&swd_clk_div_ctrl_sel_lock, flags); + if (clk->flags & ENABLE_REG_32BIT) { regval32 = __raw_readl(clk->enable_reg); regval32 |= (1 << clk->enable_bit); @@ -467,17 +559,41 @@ static int omap1_clk_enable_generic(struct clk *clk) __raw_writew(regval16, clk->enable_reg); } + if (clk->enable_reg == OMAP1_IO_ADDRESS(ARM_CKCTL)) + spin_unlock_irqrestore(&arm_ckctl_lock, flags); + else if (clk->enable_reg == OMAP1_IO_ADDRESS(ARM_IDLECT2)) + spin_unlock_irqrestore(&arm_idlect2_lock, flags); + else if (clk->enable_reg == OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0)) + spin_unlock_irqrestore(&mod_conf_ctrl_0_lock, flags); + else if (clk->enable_reg == OMAP1_IO_ADDRESS(MOD_CONF_CTRL_1)) + spin_unlock_irqrestore(&mod_conf_ctrl_1_lock, flags); + else if (clk->enable_reg == OMAP1_IO_ADDRESS(SWD_CLK_DIV_CTRL_SEL)) + spin_unlock_irqrestore(&swd_clk_div_ctrl_sel_lock, flags); + return 0; } -static void omap1_clk_disable_generic(struct clk *clk) +static void omap1_clk_disable_generic(struct omap1_clk *clk) { + unsigned long flags; __u16 regval16; __u32 regval32; if (clk->enable_reg == NULL) return; + /* protect clk->enable_reg from concurrent access via clk_set_rate() */ + if (clk->enable_reg == OMAP1_IO_ADDRESS(ARM_CKCTL)) + spin_lock_irqsave(&arm_ckctl_lock, flags); + else if (clk->enable_reg == OMAP1_IO_ADDRESS(ARM_IDLECT2)) + spin_lock_irqsave(&arm_idlect2_lock, flags); + else if (clk->enable_reg == OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0)) + spin_lock_irqsave(&mod_conf_ctrl_0_lock, flags); + else if (clk->enable_reg == OMAP1_IO_ADDRESS(MOD_CONF_CTRL_1)) + spin_lock_irqsave(&mod_conf_ctrl_1_lock, flags); + else if (clk->enable_reg == OMAP1_IO_ADDRESS(SWD_CLK_DIV_CTRL_SEL)) + spin_lock_irqsave(&swd_clk_div_ctrl_sel_lock, flags); + if (clk->flags & ENABLE_REG_32BIT) { regval32 = __raw_readl(clk->enable_reg); regval32 &= ~(1 << clk->enable_bit); @@ -487,6 +603,17 @@ static void omap1_clk_disable_generic(struct clk *clk) regval16 &= ~(1 << clk->enable_bit); __raw_writew(regval16, clk->enable_reg); } + + if (clk->enable_reg == OMAP1_IO_ADDRESS(ARM_CKCTL)) + spin_unlock_irqrestore(&arm_ckctl_lock, flags); + else if (clk->enable_reg == OMAP1_IO_ADDRESS(ARM_IDLECT2)) + spin_unlock_irqrestore(&arm_idlect2_lock, flags); + else if (clk->enable_reg == OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0)) + spin_unlock_irqrestore(&mod_conf_ctrl_0_lock, flags); + else if (clk->enable_reg == OMAP1_IO_ADDRESS(MOD_CONF_CTRL_1)) + spin_unlock_irqrestore(&mod_conf_ctrl_1_lock, flags); + else if (clk->enable_reg == OMAP1_IO_ADDRESS(SWD_CLK_DIV_CTRL_SEL)) + spin_unlock_irqrestore(&swd_clk_div_ctrl_sel_lock, flags); } const struct clkops clkops_generic = { @@ -494,25 +621,38 @@ const struct clkops clkops_generic = { .disable = omap1_clk_disable_generic, }; -static int omap1_clk_enable_dsp_domain(struct clk *clk) +static int omap1_clk_enable_dsp_domain(struct omap1_clk *clk) { - int retval; + bool api_ck_was_enabled; + int retval = 0; + + api_ck_was_enabled = omap1_clk_is_enabled(&api_ck_p->hw); + if (!api_ck_was_enabled) + retval = api_ck_p->ops->enable(api_ck_p); - retval = omap1_clk_enable(api_ck_p); if (!retval) { retval = omap1_clk_enable_generic(clk); - omap1_clk_disable(api_ck_p); + + if (!api_ck_was_enabled) + api_ck_p->ops->disable(api_ck_p); } return retval; } -static void omap1_clk_disable_dsp_domain(struct clk *clk) +static void omap1_clk_disable_dsp_domain(struct omap1_clk *clk) { - if (omap1_clk_enable(api_ck_p) == 0) { - omap1_clk_disable_generic(clk); - omap1_clk_disable(api_ck_p); - } + bool api_ck_was_enabled; + + api_ck_was_enabled = omap1_clk_is_enabled(&api_ck_p->hw); + if (!api_ck_was_enabled) + if (api_ck_p->ops->enable(api_ck_p) < 0) + return; + + omap1_clk_disable_generic(clk); + + if (!api_ck_was_enabled) + api_ck_p->ops->disable(api_ck_p); } const struct clkops clkops_dspck = { @@ -521,7 +661,7 @@ const struct clkops clkops_dspck = { }; /* XXX SYSC register handling does not belong in the clock framework */ -static int omap1_clk_enable_uart_functional_16xx(struct clk *clk) +static int omap1_clk_enable_uart_functional_16xx(struct omap1_clk *clk) { int ret; struct uart_clk *uclk; @@ -538,7 +678,7 @@ static int omap1_clk_enable_uart_functional_16xx(struct clk *clk) } /* XXX SYSC register handling does not belong in the clock framework */ -static void omap1_clk_disable_uart_functional_16xx(struct clk *clk) +static void omap1_clk_disable_uart_functional_16xx(struct omap1_clk *clk) { struct uart_clk *uclk; @@ -555,20 +695,33 @@ const struct clkops clkops_uart_16xx = { .disable = omap1_clk_disable_uart_functional_16xx, }; -long omap1_clk_round_rate(struct clk *clk, unsigned long rate) +static unsigned long omap1_clk_recalc_rate(struct clk_hw *hw, unsigned long p_rate) { - if (clk->round_rate != NULL) - return clk->round_rate(clk, rate); + struct omap1_clk *clk = to_omap1_clk(hw); + + if (clk->recalc) + return clk->recalc(clk, p_rate); return clk->rate; } -int omap1_clk_set_rate(struct clk *clk, unsigned long rate) +static long omap1_clk_round_rate(struct clk_hw *hw, unsigned long rate, unsigned long *p_rate) +{ + struct omap1_clk *clk = to_omap1_clk(hw); + + if (clk->round_rate != NULL) + return clk->round_rate(clk, rate, p_rate); + + return omap1_clk_recalc_rate(hw, *p_rate); +} + +static int omap1_clk_set_rate(struct clk_hw *hw, unsigned long rate, unsigned long p_rate) { + struct omap1_clk *clk = to_omap1_clk(hw); int ret = -EINVAL; if (clk->set_rate) - ret = clk->set_rate(clk, rate); + ret = clk->set_rate(clk, rate, p_rate); return ret; } @@ -576,243 +729,105 @@ int omap1_clk_set_rate(struct clk *clk, unsigned long rate) * Omap1 clock reset and init functions */ +static int omap1_clk_init_op(struct clk_hw *hw) +{ + struct omap1_clk *clk = to_omap1_clk(hw); + + if (clk->init) + return clk->init(clk); + + return 0; +} + #ifdef CONFIG_OMAP_RESET_CLOCKS -void omap1_clk_disable_unused(struct clk *clk) +static void omap1_clk_disable_unused(struct clk_hw *hw) { - __u32 regval32; + struct omap1_clk *clk = to_omap1_clk(hw); + const char *name = clk_hw_get_name(hw); /* Clocks in the DSP domain need api_ck. Just assume bootloader * has not enabled any DSP clocks */ if (clk->enable_reg == DSP_IDLECT2) { - pr_info("Skipping reset check for DSP domain clock \"%s\"\n", - clk->name); + pr_info("Skipping reset check for DSP domain clock \"%s\"\n", name); return; } - /* Is the clock already disabled? */ - if (clk->flags & ENABLE_REG_32BIT) - regval32 = __raw_readl(clk->enable_reg); - else - regval32 = __raw_readw(clk->enable_reg); - - if ((regval32 & (1 << clk->enable_bit)) == 0) - return; - - printk(KERN_INFO "Disabling unused clock \"%s\"... ", clk->name); - clk->ops->disable(clk); + pr_info("Disabling unused clock \"%s\"... ", name); + omap1_clk_disable(hw); printk(" done\n"); } #endif +const struct clk_ops omap1_clk_gate_ops = { + .enable = omap1_clk_enable, + .disable = omap1_clk_disable, + .is_enabled = omap1_clk_is_enabled, +#ifdef CONFIG_OMAP_RESET_CLOCKS + .disable_unused = omap1_clk_disable_unused, +#endif +}; -int clk_enable(struct clk *clk) -{ - unsigned long flags; - int ret; - - if (IS_ERR_OR_NULL(clk)) - return -EINVAL; - - spin_lock_irqsave(&clockfw_lock, flags); - ret = omap1_clk_enable(clk); - spin_unlock_irqrestore(&clockfw_lock, flags); - - return ret; -} -EXPORT_SYMBOL(clk_enable); - -void clk_disable(struct clk *clk) -{ - unsigned long flags; - - if (IS_ERR_OR_NULL(clk)) - return; - - spin_lock_irqsave(&clockfw_lock, flags); - if (clk->usecount == 0) { - pr_err("Trying disable clock %s with 0 usecount\n", - clk->name); - WARN_ON(1); - goto out; - } - - omap1_clk_disable(clk); - -out: - spin_unlock_irqrestore(&clockfw_lock, flags); -} -EXPORT_SYMBOL(clk_disable); - -unsigned long clk_get_rate(struct clk *clk) -{ - unsigned long flags; - unsigned long ret; - - if (IS_ERR_OR_NULL(clk)) - return 0; - - spin_lock_irqsave(&clockfw_lock, flags); - ret = clk->rate; - spin_unlock_irqrestore(&clockfw_lock, flags); - - return ret; -} -EXPORT_SYMBOL(clk_get_rate); - -/* - * Optional clock functions defined in include/linux/clk.h - */ - -long clk_round_rate(struct clk *clk, unsigned long rate) -{ - unsigned long flags; - long ret; - - if (IS_ERR_OR_NULL(clk)) - return 0; - - spin_lock_irqsave(&clockfw_lock, flags); - ret = omap1_clk_round_rate(clk, rate); - spin_unlock_irqrestore(&clockfw_lock, flags); - - return ret; -} -EXPORT_SYMBOL(clk_round_rate); - -int clk_set_rate(struct clk *clk, unsigned long rate) -{ - unsigned long flags; - int ret = -EINVAL; - - if (IS_ERR_OR_NULL(clk)) - return ret; - - spin_lock_irqsave(&clockfw_lock, flags); - ret = omap1_clk_set_rate(clk, rate); - if (ret == 0) - propagate_rate(clk); - spin_unlock_irqrestore(&clockfw_lock, flags); - - return ret; -} -EXPORT_SYMBOL(clk_set_rate); - -int clk_set_parent(struct clk *clk, struct clk *parent) -{ - WARN_ONCE(1, "clk_set_parent() not implemented for OMAP1\n"); - - return -EINVAL; -} -EXPORT_SYMBOL(clk_set_parent); +const struct clk_ops omap1_clk_rate_ops = { + .recalc_rate = omap1_clk_recalc_rate, + .round_rate = omap1_clk_round_rate, + .set_rate = omap1_clk_set_rate, + .init = omap1_clk_init_op, +}; -struct clk *clk_get_parent(struct clk *clk) -{ - return clk->parent; -} -EXPORT_SYMBOL(clk_get_parent); +const struct clk_ops omap1_clk_full_ops = { + .enable = omap1_clk_enable, + .disable = omap1_clk_disable, + .is_enabled = omap1_clk_is_enabled, +#ifdef CONFIG_OMAP_RESET_CLOCKS + .disable_unused = omap1_clk_disable_unused, +#endif + .recalc_rate = omap1_clk_recalc_rate, + .round_rate = omap1_clk_round_rate, + .set_rate = omap1_clk_set_rate, + .init = omap1_clk_init_op, +}; /* * OMAP specific clock functions shared between omap1 and omap2 */ /* Used for clocks that always have same value as the parent clock */ -unsigned long followparent_recalc(struct clk *clk) +unsigned long followparent_recalc(struct omap1_clk *clk, unsigned long p_rate) { - return clk->parent->rate; + return p_rate; } /* * Used for clocks that have the same value as the parent clock, * divided by some factor */ -unsigned long omap_fixed_divisor_recalc(struct clk *clk) +unsigned long omap_fixed_divisor_recalc(struct omap1_clk *clk, unsigned long p_rate) { WARN_ON(!clk->fixed_div); - return clk->parent->rate / clk->fixed_div; + return p_rate / clk->fixed_div; } /* Propagate rate to children */ -void propagate_rate(struct clk *tclk) +void propagate_rate(struct omap1_clk *tclk) { struct clk *clkp; - list_for_each_entry(clkp, &tclk->children, sibling) { - if (clkp->recalc) - clkp->rate = clkp->recalc(clkp); - propagate_rate(clkp); - } -} - -static LIST_HEAD(root_clks); - -/** - * clk_preinit - initialize any fields in the struct clk before clk init - * @clk: struct clk * to initialize - * - * Initialize any struct clk fields needed before normal clk initialization - * can run. No return value. - */ -void clk_preinit(struct clk *clk) -{ - INIT_LIST_HEAD(&clk->children); -} - -int clk_register(struct clk *clk) -{ - if (IS_ERR_OR_NULL(clk)) - return -EINVAL; - - /* - * trap out already registered clocks - */ - if (clk->node.next || clk->node.prev) - return 0; - - mutex_lock(&clocks_mutex); - if (clk->parent) - list_add(&clk->sibling, &clk->parent->children); - else - list_add(&clk->sibling, &root_clks); - - list_add(&clk->node, &clocks); - if (clk->init) - clk->init(clk); - mutex_unlock(&clocks_mutex); - - return 0; -} -EXPORT_SYMBOL(clk_register); - -void clk_unregister(struct clk *clk) -{ - if (IS_ERR_OR_NULL(clk)) + /* depend on CCF ability to recalculate new rates across whole clock subtree */ + if (WARN_ON(!(clk_hw_get_flags(&tclk->hw) & CLK_GET_RATE_NOCACHE))) return; - mutex_lock(&clocks_mutex); - list_del(&clk->sibling); - list_del(&clk->node); - mutex_unlock(&clocks_mutex); -} -EXPORT_SYMBOL(clk_unregister); - -/* - * Low level helpers - */ -static int clkll_enable_null(struct clk *clk) -{ - return 0; -} + clkp = clk_get_sys(NULL, clk_hw_get_name(&tclk->hw)); + if (WARN_ON(!clkp)) + return; -static void clkll_disable_null(struct clk *clk) -{ + clk_get_rate(clkp); + clk_put(clkp); } -const struct clkops clkops_null = { - .enable = clkll_enable_null, - .disable = clkll_disable_null, +const struct clk_ops omap1_clk_null_ops = { }; /* @@ -820,114 +835,6 @@ const struct clkops clkops_null = { * * Used for clock aliases that are needed on some OMAPs, but not others */ -struct clk dummy_ck = { - .name = "dummy", - .ops = &clkops_null, +struct omap1_clk dummy_ck __refdata = { + .hw.init = CLK_HW_INIT_NO_PARENT("dummy", &omap1_clk_null_ops, 0), }; - -/* - * - */ - -#ifdef CONFIG_OMAP_RESET_CLOCKS -/* - * Disable any unused clocks left on by the bootloader - */ -static int __init clk_disable_unused(void) -{ - struct clk *ck; - unsigned long flags; - - pr_info("clock: disabling unused clocks to save power\n"); - - spin_lock_irqsave(&clockfw_lock, flags); - list_for_each_entry(ck, &clocks, node) { - if (ck->ops == &clkops_null) - continue; - - if (ck->usecount > 0 || !ck->enable_reg) - continue; - - omap1_clk_disable_unused(ck); - } - spin_unlock_irqrestore(&clockfw_lock, flags); - - return 0; -} -late_initcall(clk_disable_unused); -#endif - -#if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS) -/* - * debugfs support to trace clock tree hierarchy and attributes - */ - -#include <linux/debugfs.h> -#include <linux/seq_file.h> - -static struct dentry *clk_debugfs_root; - -static int debug_clock_show(struct seq_file *s, void *unused) -{ - struct clk *c; - struct clk *pa; - - mutex_lock(&clocks_mutex); - seq_printf(s, "%-30s %-30s %-10s %s\n", - "clock-name", "parent-name", "rate", "use-count"); - - list_for_each_entry(c, &clocks, node) { - pa = c->parent; - seq_printf(s, "%-30s %-30s %-10lu %d\n", - c->name, pa ? pa->name : "none", c->rate, - c->usecount); - } - mutex_unlock(&clocks_mutex); - - return 0; -} - -DEFINE_SHOW_ATTRIBUTE(debug_clock); - -static void clk_debugfs_register_one(struct clk *c) -{ - struct dentry *d; - struct clk *pa = c->parent; - - d = debugfs_create_dir(c->name, pa ? pa->dent : clk_debugfs_root); - c->dent = d; - - debugfs_create_u8("usecount", S_IRUGO, c->dent, &c->usecount); - debugfs_create_ulong("rate", S_IRUGO, c->dent, &c->rate); - debugfs_create_x8("flags", S_IRUGO, c->dent, &c->flags); -} - -static void clk_debugfs_register(struct clk *c) -{ - struct clk *pa = c->parent; - - if (pa && !pa->dent) - clk_debugfs_register(pa); - - if (!c->dent) - clk_debugfs_register_one(c); -} - -static int __init clk_debugfs_init(void) -{ - struct clk *c; - struct dentry *d; - - d = debugfs_create_dir("clock", NULL); - clk_debugfs_root = d; - - list_for_each_entry(c, &clocks, node) - clk_debugfs_register(c); - - debugfs_create_file("summary", S_IRUGO, d, NULL, &debug_clock_fops); - - return 0; -} -late_initcall(clk_debugfs_init); - -#endif /* defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS) */ diff --git a/arch/arm/mach-omap1/clock.h b/arch/arm/mach-omap1/clock.h index 8025e4a22469..16cfb2e86ee4 100644 --- a/arch/arm/mach-omap1/clock.h +++ b/arch/arm/mach-omap1/clock.h @@ -11,12 +11,11 @@ #define __ARCH_ARM_MACH_OMAP1_CLOCK_H #include <linux/clk.h> -#include <linux/list.h> - #include <linux/clkdev.h> +#include <linux/clk-provider.h> struct module; -struct clk; +struct omap1_clk; struct omap_clk { u16 cpu; @@ -29,7 +28,7 @@ struct omap_clk { .lk = { \ .dev_id = dev, \ .con_id = con, \ - .clk = ck, \ + .clk_hw = ck, \ }, \ } @@ -40,10 +39,6 @@ struct omap_clk { #define CK_16XX (1 << 3) /* 16xx, 17xx, 5912 */ #define CK_1710 (1 << 4) /* 1710 extra for rate selection */ - -/* Temporary, needed during the common clock framework conversion */ -#define __clk_get_name(clk) (clk->name) - /** * struct clkops - some clock function pointers * @enable: fn ptr that enables the current clock in hardware @@ -51,8 +46,8 @@ struct omap_clk { * @allow_idle: fn ptr that enables autoidle for the current clock in hardware */ struct clkops { - int (*enable)(struct clk *); - void (*disable)(struct clk *); + int (*enable)(struct omap1_clk *clk); + void (*disable)(struct omap1_clk *clk); }; /* @@ -65,13 +60,9 @@ struct clkops { #define CLOCK_NO_IDLE_PARENT (1 << 2) /** - * struct clk - OMAP struct clk - * @node: list_head connecting this clock into the full clock list + * struct omap1_clk - OMAP1 struct clk + * @hw: struct clk_hw for common clock framework integration * @ops: struct clkops * for this clock - * @name: the name of the clock in the hardware (used in hwmod data and debug) - * @parent: pointer to this clock's parent struct clk - * @children: list_head connecting to the child clks' @sibling list_heads - * @sibling: list_head connecting this clk to its parent clk's @children * @rate: current clock rate * @enable_reg: register to write to enable the clock (see @enable_bit) * @recalc: fn ptr that returns the clock's current rate @@ -79,102 +70,65 @@ struct clkops { * @round_rate: fn ptr that can round the clock's current rate * @init: fn ptr to do clock-specific initialization * @enable_bit: bitshift to write to enable/disable the clock (see @enable_reg) - * @usecount: number of users that have requested this clock to be enabled * @fixed_div: when > 0, this clock's rate is its parent's rate / @fixed_div * @flags: see "struct clk.flags possibilities" above * @rate_offset: bitshift for rate selection bitfield (OMAP1 only) - * - * XXX @rate_offset should probably be removed and OMAP1 - * clock code converted to use clksel. - * - * XXX @usecount is poorly named. It should be "enable_count" or - * something similar. "users" in the description refers to kernel - * code (core code or drivers) that have called clk_enable() and not - * yet called clk_disable(); the usecount of parent clocks is also - * incremented by the clock code when clk_enable() is called on child - * clocks and decremented by the clock code when clk_disable() is - * called on child clocks. - * - * XXX @usecount, @children, @sibling should be marked for - * internal use only. - * - * @children and @sibling are used to optimize parent-to-child clock - * tree traversals. (child-to-parent traversals use @parent.) - * - * XXX The notion of the clock's current rate probably needs to be - * separated from the clock's target rate. */ -struct clk { - struct list_head node; +struct omap1_clk { + struct clk_hw hw; const struct clkops *ops; - const char *name; - struct clk *parent; - struct list_head children; - struct list_head sibling; /* node for children */ unsigned long rate; void __iomem *enable_reg; - unsigned long (*recalc)(struct clk *); - int (*set_rate)(struct clk *, unsigned long); - long (*round_rate)(struct clk *, unsigned long); - void (*init)(struct clk *); + unsigned long (*recalc)(struct omap1_clk *clk, unsigned long rate); + int (*set_rate)(struct omap1_clk *clk, unsigned long rate, + unsigned long p_rate); + long (*round_rate)(struct omap1_clk *clk, unsigned long rate, + unsigned long *p_rate); + int (*init)(struct omap1_clk *clk); u8 enable_bit; - s8 usecount; u8 fixed_div; u8 flags; u8 rate_offset; -#if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS) - struct dentry *dent; /* For visible tree hierarchy */ -#endif }; +#define to_omap1_clk(_hw) container_of(_hw, struct omap1_clk, hw) -extern void clk_preinit(struct clk *clk); -extern int clk_register(struct clk *clk); -extern void clk_unregister(struct clk *clk); -extern void propagate_rate(struct clk *clk); -extern unsigned long followparent_recalc(struct clk *clk); -unsigned long omap_fixed_divisor_recalc(struct clk *clk); +void propagate_rate(struct omap1_clk *clk); +unsigned long followparent_recalc(struct omap1_clk *clk, unsigned long p_rate); +unsigned long omap_fixed_divisor_recalc(struct omap1_clk *clk, unsigned long p_rate); -extern const struct clkops clkops_null; - -extern struct clk dummy_ck; +extern struct omap1_clk dummy_ck; int omap1_clk_init(void); void omap1_clk_late_init(void); -extern int omap1_clk_enable(struct clk *clk); -extern void omap1_clk_disable(struct clk *clk); -extern long omap1_clk_round_rate(struct clk *clk, unsigned long rate); -extern int omap1_clk_set_rate(struct clk *clk, unsigned long rate); -extern unsigned long omap1_ckctl_recalc(struct clk *clk); -extern int omap1_set_sossi_rate(struct clk *clk, unsigned long rate); -extern unsigned long omap1_sossi_recalc(struct clk *clk); -extern unsigned long omap1_ckctl_recalc_dsp_domain(struct clk *clk); -extern int omap1_clk_set_rate_dsp_domain(struct clk *clk, unsigned long rate); -extern int omap1_set_uart_rate(struct clk *clk, unsigned long rate); -extern unsigned long omap1_uart_recalc(struct clk *clk); -extern int omap1_set_ext_clk_rate(struct clk *clk, unsigned long rate); -extern long omap1_round_ext_clk_rate(struct clk *clk, unsigned long rate); -extern void omap1_init_ext_clk(struct clk *clk); -extern int omap1_select_table_rate(struct clk *clk, unsigned long rate); -extern long omap1_round_to_table_rate(struct clk *clk, unsigned long rate); -extern int omap1_clk_set_rate_ckctl_arm(struct clk *clk, unsigned long rate); -extern long omap1_clk_round_rate_ckctl_arm(struct clk *clk, unsigned long rate); - -#ifdef CONFIG_OMAP_RESET_CLOCKS -extern void omap1_clk_disable_unused(struct clk *clk); -#else -#define omap1_clk_disable_unused NULL -#endif +unsigned long omap1_ckctl_recalc(struct omap1_clk *clk, unsigned long p_rate); +long omap1_round_sossi_rate(struct omap1_clk *clk, unsigned long rate, unsigned long *p_rate); +int omap1_set_sossi_rate(struct omap1_clk *clk, unsigned long rate, unsigned long p_rate); +unsigned long omap1_sossi_recalc(struct omap1_clk *clk, unsigned long p_rate); +unsigned long omap1_ckctl_recalc_dsp_domain(struct omap1_clk *clk, unsigned long p_rate); +int omap1_clk_set_rate_dsp_domain(struct omap1_clk *clk, unsigned long rate, + unsigned long p_rate); +long omap1_round_uart_rate(struct omap1_clk *clk, unsigned long rate, unsigned long *p_rate); +int omap1_set_uart_rate(struct omap1_clk *clk, unsigned long rate, unsigned long p_rate); +unsigned long omap1_uart_recalc(struct omap1_clk *clk, unsigned long p_rate); +int omap1_set_ext_clk_rate(struct omap1_clk *clk, unsigned long rate, unsigned long p_rate); +long omap1_round_ext_clk_rate(struct omap1_clk *clk, unsigned long rate, unsigned long *p_rate); +int omap1_init_ext_clk(struct omap1_clk *clk); +int omap1_select_table_rate(struct omap1_clk *clk, unsigned long rate, unsigned long p_rate); +long omap1_round_to_table_rate(struct omap1_clk *clk, unsigned long rate, unsigned long *p_rate); +int omap1_clk_set_rate_ckctl_arm(struct omap1_clk *clk, unsigned long rate, unsigned long p_rate); +long omap1_clk_round_rate_ckctl_arm(struct omap1_clk *clk, unsigned long rate, + unsigned long *p_rate); struct uart_clk { - struct clk clk; - unsigned long sysc_addr; + struct omap1_clk clk; + unsigned long sysc_addr; }; /* Provide a method for preventing idling some ARM IDLECT clocks */ struct arm_idlect1_clk { - struct clk clk; - unsigned long no_idle_count; - __u8 idlect_shift; + struct omap1_clk clk; + unsigned long no_idle_count; + __u8 idlect_shift; }; /* ARM_CKCTL bit shifts */ @@ -224,7 +178,7 @@ struct arm_idlect1_clk { #define SOFT_REQ_REG2 0xfffe0880 extern __u32 arm_idlect1_mask; -extern struct clk *api_ck_p, *ck_dpll1_p, *ck_ref_p; +extern struct omap1_clk *api_ck_p, *ck_dpll1_p, *ck_ref_p; extern const struct clkops clkops_dspck; extern const struct clkops clkops_uart_16xx; @@ -233,4 +187,9 @@ extern const struct clkops clkops_generic; /* used for passing SoC type to omap1_{select,round_to}_table_rate() */ extern u32 cpu_mask; +extern const struct clk_ops omap1_clk_null_ops; +extern const struct clk_ops omap1_clk_gate_ops; +extern const struct clk_ops omap1_clk_rate_ops; +extern const struct clk_ops omap1_clk_full_ops; + #endif diff --git a/arch/arm/mach-omap1/clock_data.c b/arch/arm/mach-omap1/clock_data.c index 165b6a75a59b..96d846c37c43 100644 --- a/arch/arm/mach-omap1/clock_data.c +++ b/arch/arm/mach-omap1/clock_data.c @@ -14,6 +14,8 @@ #include <linux/kernel.h> #include <linux/io.h> #include <linux/clk.h> +#include <linux/clkdev.h> +#include <linux/clk-provider.h> #include <linux/cpufreq.h> #include <linux/delay.h> #include <linux/soc/ti/omap1-io.h> @@ -71,16 +73,18 @@ * Omap1 clocks */ -static struct clk ck_ref = { - .name = "ck_ref", - .ops = &clkops_null, +static struct omap1_clk ck_ref = { + .hw.init = CLK_HW_INIT_NO_PARENT("ck_ref", &omap1_clk_rate_ops, 0), .rate = 12000000, }; -static struct clk ck_dpll1 = { - .name = "ck_dpll1", - .ops = &clkops_null, - .parent = &ck_ref, +static struct omap1_clk ck_dpll1 = { + .hw.init = CLK_HW_INIT("ck_dpll1", "ck_ref", &omap1_clk_rate_ops, + /* + * force recursive refresh of rates of the clock + * and its children when clk_get_rate() is called + */ + CLK_GET_RATE_NOCACHE), }; /* @@ -89,32 +93,28 @@ static struct clk ck_dpll1 = { */ static struct arm_idlect1_clk ck_dpll1out = { .clk = { - .name = "ck_dpll1out", + .hw.init = CLK_HW_INIT("ck_dpll1out", "ck_dpll1", &omap1_clk_gate_ops, 0), .ops = &clkops_generic, - .parent = &ck_dpll1, .flags = CLOCK_IDLE_CONTROL | ENABLE_REG_32BIT, .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2), .enable_bit = EN_CKOUT_ARM, - .recalc = &followparent_recalc, }, .idlect_shift = IDL_CLKOUT_ARM_SHIFT, }; -static struct clk sossi_ck = { - .name = "ck_sossi", +static struct omap1_clk sossi_ck = { + .hw.init = CLK_HW_INIT("ck_sossi", "ck_dpll1out", &omap1_clk_full_ops, 0), .ops = &clkops_generic, - .parent = &ck_dpll1out.clk, .flags = CLOCK_NO_IDLE_PARENT | ENABLE_REG_32BIT, .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_1), .enable_bit = CONF_MOD_SOSSI_CLK_EN_R, .recalc = &omap1_sossi_recalc, + .round_rate = &omap1_round_sossi_rate, .set_rate = &omap1_set_sossi_rate, }; -static struct clk arm_ck = { - .name = "arm_ck", - .ops = &clkops_null, - .parent = &ck_dpll1, +static struct omap1_clk arm_ck = { + .hw.init = CLK_HW_INIT("arm_ck", "ck_dpll1", &omap1_clk_rate_ops, 0), .rate_offset = CKCTL_ARMDIV_OFFSET, .recalc = &omap1_ckctl_recalc, .round_rate = omap1_clk_round_rate_ckctl_arm, @@ -123,9 +123,9 @@ static struct clk arm_ck = { static struct arm_idlect1_clk armper_ck = { .clk = { - .name = "armper_ck", + .hw.init = CLK_HW_INIT("armper_ck", "ck_dpll1", &omap1_clk_full_ops, + CLK_IS_CRITICAL), .ops = &clkops_generic, - .parent = &ck_dpll1, .flags = CLOCK_IDLE_CONTROL, .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2), .enable_bit = EN_PERCK, @@ -141,46 +141,41 @@ static struct arm_idlect1_clk armper_ck = { * FIXME: This clock seems to be necessary but no-one has asked for its * activation. [ GPIO code for 1510 ] */ -static struct clk arm_gpio_ck = { - .name = "ick", +static struct omap1_clk arm_gpio_ck = { + .hw.init = CLK_HW_INIT("ick", "ck_dpll1", &omap1_clk_gate_ops, CLK_IS_CRITICAL), .ops = &clkops_generic, - .parent = &ck_dpll1, .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2), .enable_bit = EN_GPIOCK, - .recalc = &followparent_recalc, }; static struct arm_idlect1_clk armxor_ck = { .clk = { - .name = "armxor_ck", + .hw.init = CLK_HW_INIT("armxor_ck", "ck_ref", &omap1_clk_gate_ops, + CLK_IS_CRITICAL), .ops = &clkops_generic, - .parent = &ck_ref, .flags = CLOCK_IDLE_CONTROL, .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2), .enable_bit = EN_XORPCK, - .recalc = &followparent_recalc, }, .idlect_shift = IDLXORP_ARM_SHIFT, }; static struct arm_idlect1_clk armtim_ck = { .clk = { - .name = "armtim_ck", + .hw.init = CLK_HW_INIT("armtim_ck", "ck_ref", &omap1_clk_gate_ops, + CLK_IS_CRITICAL), .ops = &clkops_generic, - .parent = &ck_ref, .flags = CLOCK_IDLE_CONTROL, .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2), .enable_bit = EN_TIMCK, - .recalc = &followparent_recalc, }, .idlect_shift = IDLTIM_ARM_SHIFT, }; static struct arm_idlect1_clk armwdt_ck = { .clk = { - .name = "armwdt_ck", + .hw.init = CLK_HW_INIT("armwdt_ck", "ck_ref", &omap1_clk_full_ops, 0), .ops = &clkops_generic, - .parent = &ck_ref, .flags = CLOCK_IDLE_CONTROL, .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2), .enable_bit = EN_WDTCK, @@ -190,11 +185,8 @@ static struct arm_idlect1_clk armwdt_ck = { .idlect_shift = IDLWDT_ARM_SHIFT, }; -static struct clk arminth_ck16xx = { - .name = "arminth_ck", - .ops = &clkops_null, - .parent = &arm_ck, - .recalc = &followparent_recalc, +static struct omap1_clk arminth_ck16xx = { + .hw.init = CLK_HW_INIT("arminth_ck", "arm_ck", &omap1_clk_null_ops, 0), /* Note: On 16xx the frequency can be divided by 2 by programming * ARM_CKCTL:ARM_INTHCK_SEL(14) to 1 * @@ -202,10 +194,9 @@ static struct clk arminth_ck16xx = { */ }; -static struct clk dsp_ck = { - .name = "dsp_ck", +static struct omap1_clk dsp_ck = { + .hw.init = CLK_HW_INIT("dsp_ck", "ck_dpll1", &omap1_clk_full_ops, 0), .ops = &clkops_generic, - .parent = &ck_dpll1, .enable_reg = OMAP1_IO_ADDRESS(ARM_CKCTL), .enable_bit = EN_DSPCK, .rate_offset = CKCTL_DSPDIV_OFFSET, @@ -214,20 +205,17 @@ static struct clk dsp_ck = { .set_rate = omap1_clk_set_rate_ckctl_arm, }; -static struct clk dspmmu_ck = { - .name = "dspmmu_ck", - .ops = &clkops_null, - .parent = &ck_dpll1, +static struct omap1_clk dspmmu_ck = { + .hw.init = CLK_HW_INIT("dspmmu_ck", "ck_dpll1", &omap1_clk_rate_ops, 0), .rate_offset = CKCTL_DSPMMUDIV_OFFSET, .recalc = &omap1_ckctl_recalc, .round_rate = omap1_clk_round_rate_ckctl_arm, .set_rate = omap1_clk_set_rate_ckctl_arm, }; -static struct clk dspper_ck = { - .name = "dspper_ck", +static struct omap1_clk dspper_ck = { + .hw.init = CLK_HW_INIT("dspper_ck", "ck_dpll1", &omap1_clk_full_ops, 0), .ops = &clkops_dspck, - .parent = &ck_dpll1, .enable_reg = DSP_IDLECT2, .enable_bit = EN_PERCK, .rate_offset = CKCTL_PERDIV_OFFSET, @@ -236,29 +224,23 @@ static struct clk dspper_ck = { .set_rate = &omap1_clk_set_rate_dsp_domain, }; -static struct clk dspxor_ck = { - .name = "dspxor_ck", +static struct omap1_clk dspxor_ck = { + .hw.init = CLK_HW_INIT("dspxor_ck", "ck_ref", &omap1_clk_gate_ops, 0), .ops = &clkops_dspck, - .parent = &ck_ref, .enable_reg = DSP_IDLECT2, .enable_bit = EN_XORPCK, - .recalc = &followparent_recalc, }; -static struct clk dsptim_ck = { - .name = "dsptim_ck", +static struct omap1_clk dsptim_ck = { + .hw.init = CLK_HW_INIT("dsptim_ck", "ck_ref", &omap1_clk_gate_ops, 0), .ops = &clkops_dspck, - .parent = &ck_ref, .enable_reg = DSP_IDLECT2, .enable_bit = EN_DSPTIMCK, - .recalc = &followparent_recalc, }; static struct arm_idlect1_clk tc_ck = { .clk = { - .name = "tc_ck", - .ops = &clkops_null, - .parent = &ck_dpll1, + .hw.init = CLK_HW_INIT("tc_ck", "ck_dpll1", &omap1_clk_rate_ops, 0), .flags = CLOCK_IDLE_CONTROL, .rate_offset = CKCTL_TCDIV_OFFSET, .recalc = &omap1_ckctl_recalc, @@ -268,116 +250,88 @@ static struct arm_idlect1_clk tc_ck = { .idlect_shift = IDLIF_ARM_SHIFT, }; -static struct clk arminth_ck1510 = { - .name = "arminth_ck", - .ops = &clkops_null, - .parent = &tc_ck.clk, - .recalc = &followparent_recalc, +static struct omap1_clk arminth_ck1510 = { + .hw.init = CLK_HW_INIT("arminth_ck", "tc_ck", &omap1_clk_null_ops, 0), /* Note: On 1510 the frequency follows TC_CK * * 16xx version is in MPU clocks. */ }; -static struct clk tipb_ck = { +static struct omap1_clk tipb_ck = { /* No-idle controlled by "tc_ck" */ - .name = "tipb_ck", - .ops = &clkops_null, - .parent = &tc_ck.clk, - .recalc = &followparent_recalc, + .hw.init = CLK_HW_INIT("tipb_ck", "tc_ck", &omap1_clk_null_ops, 0), }; -static struct clk l3_ocpi_ck = { +static struct omap1_clk l3_ocpi_ck = { /* No-idle controlled by "tc_ck" */ - .name = "l3_ocpi_ck", + .hw.init = CLK_HW_INIT("l3_ocpi_ck", "tc_ck", &omap1_clk_gate_ops, 0), .ops = &clkops_generic, - .parent = &tc_ck.clk, .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT3), .enable_bit = EN_OCPI_CK, - .recalc = &followparent_recalc, }; -static struct clk tc1_ck = { - .name = "tc1_ck", +static struct omap1_clk tc1_ck = { + .hw.init = CLK_HW_INIT("tc1_ck", "tc_ck", &omap1_clk_gate_ops, 0), .ops = &clkops_generic, - .parent = &tc_ck.clk, .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT3), .enable_bit = EN_TC1_CK, - .recalc = &followparent_recalc, }; /* * FIXME: This clock seems to be necessary but no-one has asked for its * activation. [ pm.c (SRAM), CCP, Camera ] */ -static struct clk tc2_ck = { - .name = "tc2_ck", + +static struct omap1_clk tc2_ck = { + .hw.init = CLK_HW_INIT("tc2_ck", "tc_ck", &omap1_clk_gate_ops, CLK_IS_CRITICAL), .ops = &clkops_generic, - .parent = &tc_ck.clk, .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT3), .enable_bit = EN_TC2_CK, - .recalc = &followparent_recalc, }; -static struct clk dma_ck = { +static struct omap1_clk dma_ck = { /* No-idle controlled by "tc_ck" */ - .name = "dma_ck", - .ops = &clkops_null, - .parent = &tc_ck.clk, - .recalc = &followparent_recalc, + .hw.init = CLK_HW_INIT("dma_ck", "tc_ck", &omap1_clk_null_ops, 0), }; -static struct clk dma_lcdfree_ck = { - .name = "dma_lcdfree_ck", - .ops = &clkops_null, - .parent = &tc_ck.clk, - .recalc = &followparent_recalc, +static struct omap1_clk dma_lcdfree_ck = { + .hw.init = CLK_HW_INIT("dma_lcdfree_ck", "tc_ck", &omap1_clk_null_ops, 0), }; static struct arm_idlect1_clk api_ck = { .clk = { - .name = "api_ck", + .hw.init = CLK_HW_INIT("api_ck", "tc_ck", &omap1_clk_gate_ops, 0), .ops = &clkops_generic, - .parent = &tc_ck.clk, .flags = CLOCK_IDLE_CONTROL, .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2), .enable_bit = EN_APICK, - .recalc = &followparent_recalc, }, .idlect_shift = IDLAPI_ARM_SHIFT, }; static struct arm_idlect1_clk lb_ck = { .clk = { - .name = "lb_ck", + .hw.init = CLK_HW_INIT("lb_ck", "tc_ck", &omap1_clk_gate_ops, 0), .ops = &clkops_generic, - .parent = &tc_ck.clk, .flags = CLOCK_IDLE_CONTROL, .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2), .enable_bit = EN_LBCK, - .recalc = &followparent_recalc, }, .idlect_shift = IDLLB_ARM_SHIFT, }; -static struct clk rhea1_ck = { - .name = "rhea1_ck", - .ops = &clkops_null, - .parent = &tc_ck.clk, - .recalc = &followparent_recalc, +static struct omap1_clk rhea1_ck = { + .hw.init = CLK_HW_INIT("rhea1_ck", "tc_ck", &omap1_clk_null_ops, 0), }; -static struct clk rhea2_ck = { - .name = "rhea2_ck", - .ops = &clkops_null, - .parent = &tc_ck.clk, - .recalc = &followparent_recalc, +static struct omap1_clk rhea2_ck = { + .hw.init = CLK_HW_INIT("rhea2_ck", "tc_ck", &omap1_clk_null_ops, 0), }; -static struct clk lcd_ck_16xx = { - .name = "lcd_ck", +static struct omap1_clk lcd_ck_16xx = { + .hw.init = CLK_HW_INIT("lcd_ck", "ck_dpll1", &omap1_clk_full_ops, 0), .ops = &clkops_generic, - .parent = &ck_dpll1, .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2), .enable_bit = EN_LCDCK, .rate_offset = CKCTL_LCDDIV_OFFSET, @@ -388,9 +342,8 @@ static struct clk lcd_ck_16xx = { static struct arm_idlect1_clk lcd_ck_1510 = { .clk = { - .name = "lcd_ck", + .hw.init = CLK_HW_INIT("lcd_ck", "ck_dpll1", &omap1_clk_full_ops, 0), .ops = &clkops_generic, - .parent = &ck_dpll1, .flags = CLOCK_IDLE_CONTROL, .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2), .enable_bit = EN_LCDCK, @@ -402,37 +355,35 @@ static struct arm_idlect1_clk lcd_ck_1510 = { .idlect_shift = OMAP1510_IDLLCD_ARM_SHIFT, }; + /* * XXX The enable_bit here is misused - it simply switches between 12MHz - * and 48MHz. Reimplement with clksel. + * and 48MHz. Reimplement with clk_mux. * * XXX does this need SYSC register handling? */ -static struct clk uart1_1510 = { - .name = "uart1_ck", - .ops = &clkops_null, +static struct omap1_clk uart1_1510 = { /* Direct from ULPD, no real parent */ - .parent = &armper_ck.clk, - .rate = 12000000, + .hw.init = CLK_HW_INIT("uart1_ck", "armper_ck", &omap1_clk_full_ops, 0), .flags = ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT, .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0), .enable_bit = CONF_MOD_UART1_CLK_MODE_R, + .round_rate = &omap1_round_uart_rate, .set_rate = &omap1_set_uart_rate, .recalc = &omap1_uart_recalc, }; /* * XXX The enable_bit here is misused - it simply switches between 12MHz - * and 48MHz. Reimplement with clksel. + * and 48MHz. Reimplement with clk_mux. * * XXX SYSC register handling does not belong in the clock framework */ static struct uart_clk uart1_16xx = { .clk = { - .name = "uart1_ck", .ops = &clkops_uart_16xx, /* Direct from ULPD, no real parent */ - .parent = &armper_ck.clk, + .hw.init = CLK_HW_INIT("uart1_ck", "armper_ck", &omap1_clk_full_ops, 0), .rate = 48000000, .flags = ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT, .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0), @@ -443,54 +394,49 @@ static struct uart_clk uart1_16xx = { /* * XXX The enable_bit here is misused - it simply switches between 12MHz - * and 48MHz. Reimplement with clksel. + * and 48MHz. Reimplement with clk_mux. * * XXX does this need SYSC register handling? */ -static struct clk uart2_ck = { - .name = "uart2_ck", - .ops = &clkops_null, +static struct omap1_clk uart2_ck = { /* Direct from ULPD, no real parent */ - .parent = &armper_ck.clk, - .rate = 12000000, + .hw.init = CLK_HW_INIT("uart2_ck", "armper_ck", &omap1_clk_full_ops, 0), .flags = ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT, .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0), .enable_bit = CONF_MOD_UART2_CLK_MODE_R, + .round_rate = &omap1_round_uart_rate, .set_rate = &omap1_set_uart_rate, .recalc = &omap1_uart_recalc, }; /* * XXX The enable_bit here is misused - it simply switches between 12MHz - * and 48MHz. Reimplement with clksel. + * and 48MHz. Reimplement with clk_mux. * * XXX does this need SYSC register handling? */ -static struct clk uart3_1510 = { - .name = "uart3_ck", - .ops = &clkops_null, +static struct omap1_clk uart3_1510 = { /* Direct from ULPD, no real parent */ - .parent = &armper_ck.clk, - .rate = 12000000, + .hw.init = CLK_HW_INIT("uart3_ck", "armper_ck", &omap1_clk_full_ops, 0), .flags = ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT, .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0), .enable_bit = CONF_MOD_UART3_CLK_MODE_R, + .round_rate = &omap1_round_uart_rate, .set_rate = &omap1_set_uart_rate, .recalc = &omap1_uart_recalc, }; /* * XXX The enable_bit here is misused - it simply switches between 12MHz - * and 48MHz. Reimplement with clksel. + * and 48MHz. Reimplement with clk_mux. * * XXX SYSC register handling does not belong in the clock framework */ static struct uart_clk uart3_16xx = { .clk = { - .name = "uart3_ck", .ops = &clkops_uart_16xx, /* Direct from ULPD, no real parent */ - .parent = &armper_ck.clk, + .hw.init = CLK_HW_INIT("uart3_ck", "armper_ck", &omap1_clk_full_ops, 0), .rate = 48000000, .flags = ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT, .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0), @@ -499,30 +445,30 @@ static struct uart_clk uart3_16xx = { .sysc_addr = 0xfffb9854, }; -static struct clk usb_clko = { /* 6 MHz output on W4_USB_CLKO */ - .name = "usb_clko", +static struct omap1_clk usb_clko = { /* 6 MHz output on W4_USB_CLKO */ .ops = &clkops_generic, /* Direct from ULPD, no parent */ + .hw.init = CLK_HW_INIT_NO_PARENT("usb_clko", &omap1_clk_full_ops, 0), .rate = 6000000, .flags = ENABLE_REG_32BIT, .enable_reg = OMAP1_IO_ADDRESS(ULPD_CLOCK_CTRL), .enable_bit = USB_MCLK_EN_BIT, }; -static struct clk usb_hhc_ck1510 = { - .name = "usb_hhc_ck", +static struct omap1_clk usb_hhc_ck1510 = { .ops = &clkops_generic, /* Direct from ULPD, no parent */ + .hw.init = CLK_HW_INIT_NO_PARENT("usb_hhc_ck", &omap1_clk_full_ops, 0), .rate = 48000000, /* Actually 2 clocks, 12MHz and 48MHz */ .flags = ENABLE_REG_32BIT, .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0), .enable_bit = USB_HOST_HHC_UHOST_EN, }; -static struct clk usb_hhc_ck16xx = { - .name = "usb_hhc_ck", +static struct omap1_clk usb_hhc_ck16xx = { .ops = &clkops_generic, /* Direct from ULPD, no parent */ + .hw.init = CLK_HW_INIT_NO_PARENT("usb_hhc_ck", &omap1_clk_full_ops, 0), .rate = 48000000, /* OTG_SYSCON_2.OTG_PADEN == 0 (not 1510-compatible) */ .flags = ENABLE_REG_32BIT, @@ -530,46 +476,46 @@ static struct clk usb_hhc_ck16xx = { .enable_bit = OTG_SYSCON_2_UHOST_EN_SHIFT }; -static struct clk usb_dc_ck = { - .name = "usb_dc_ck", +static struct omap1_clk usb_dc_ck = { .ops = &clkops_generic, /* Direct from ULPD, no parent */ + .hw.init = CLK_HW_INIT_NO_PARENT("usb_dc_ck", &omap1_clk_full_ops, 0), .rate = 48000000, .enable_reg = OMAP1_IO_ADDRESS(SOFT_REQ_REG), .enable_bit = SOFT_USB_OTG_DPLL_REQ_SHIFT, }; -static struct clk uart1_7xx = { - .name = "uart1_ck", +static struct omap1_clk uart1_7xx = { .ops = &clkops_generic, /* Direct from ULPD, no parent */ + .hw.init = CLK_HW_INIT_NO_PARENT("uart1_ck", &omap1_clk_full_ops, 0), .rate = 12000000, .enable_reg = OMAP1_IO_ADDRESS(SOFT_REQ_REG), .enable_bit = 9, }; -static struct clk uart2_7xx = { - .name = "uart2_ck", +static struct omap1_clk uart2_7xx = { .ops = &clkops_generic, /* Direct from ULPD, no parent */ + .hw.init = CLK_HW_INIT_NO_PARENT("uart2_ck", &omap1_clk_full_ops, 0), .rate = 12000000, .enable_reg = OMAP1_IO_ADDRESS(SOFT_REQ_REG), .enable_bit = 11, }; -static struct clk mclk_1510 = { - .name = "mclk", +static struct omap1_clk mclk_1510 = { .ops = &clkops_generic, /* Direct from ULPD, no parent. May be enabled by ext hardware. */ + .hw.init = CLK_HW_INIT_NO_PARENT("mclk", &omap1_clk_full_ops, 0), .rate = 12000000, .enable_reg = OMAP1_IO_ADDRESS(SOFT_REQ_REG), .enable_bit = SOFT_COM_MCKO_REQ_SHIFT, }; -static struct clk mclk_16xx = { - .name = "mclk", +static struct omap1_clk mclk_16xx = { .ops = &clkops_generic, /* Direct from ULPD, no parent. May be enabled by ext hardware. */ + .hw.init = CLK_HW_INIT_NO_PARENT("mclk", &omap1_clk_full_ops, 0), .enable_reg = OMAP1_IO_ADDRESS(COM_CLK_DIV_CTRL_SEL), .enable_bit = COM_ULPD_PLL_CLK_REQ, .set_rate = &omap1_set_ext_clk_rate, @@ -577,17 +523,16 @@ static struct clk mclk_16xx = { .init = &omap1_init_ext_clk, }; -static struct clk bclk_1510 = { - .name = "bclk", - .ops = &clkops_generic, +static struct omap1_clk bclk_1510 = { /* Direct from ULPD, no parent. May be enabled by ext hardware. */ + .hw.init = CLK_HW_INIT_NO_PARENT("bclk", &omap1_clk_rate_ops, 0), .rate = 12000000, }; -static struct clk bclk_16xx = { - .name = "bclk", +static struct omap1_clk bclk_16xx = { .ops = &clkops_generic, /* Direct from ULPD, no parent. May be enabled by ext hardware. */ + .hw.init = CLK_HW_INIT_NO_PARENT("bclk", &omap1_clk_full_ops, 0), .enable_reg = OMAP1_IO_ADDRESS(SWD_CLK_DIV_CTRL_SEL), .enable_bit = SWD_ULPD_PLL_CLK_REQ, .set_rate = &omap1_set_ext_clk_rate, @@ -595,11 +540,10 @@ static struct clk bclk_16xx = { .init = &omap1_init_ext_clk, }; -static struct clk mmc1_ck = { - .name = "mmc1_ck", +static struct omap1_clk mmc1_ck = { .ops = &clkops_generic, /* Functional clock is direct from ULPD, interface clock is ARMPER */ - .parent = &armper_ck.clk, + .hw.init = CLK_HW_INIT("mmc1_ck", "armper_ck", &omap1_clk_full_ops, 0), .rate = 48000000, .flags = ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT, .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0), @@ -610,32 +554,29 @@ static struct clk mmc1_ck = { * XXX MOD_CONF_CTRL_0 bit 20 is defined in the 1510 TRM as * CONF_MOD_MCBSP3_AUXON ?? */ -static struct clk mmc2_ck = { - .name = "mmc2_ck", +static struct omap1_clk mmc2_ck = { .ops = &clkops_generic, /* Functional clock is direct from ULPD, interface clock is ARMPER */ - .parent = &armper_ck.clk, + .hw.init = CLK_HW_INIT("mmc2_ck", "armper_ck", &omap1_clk_full_ops, 0), .rate = 48000000, .flags = ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT, .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0), .enable_bit = 20, }; -static struct clk mmc3_ck = { - .name = "mmc3_ck", +static struct omap1_clk mmc3_ck = { .ops = &clkops_generic, /* Functional clock is direct from ULPD, interface clock is ARMPER */ - .parent = &armper_ck.clk, + .hw.init = CLK_HW_INIT("mmc3_ck", "armper_ck", &omap1_clk_full_ops, 0), .rate = 48000000, .flags = ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT, .enable_reg = OMAP1_IO_ADDRESS(SOFT_REQ_REG), .enable_bit = SOFT_MMC_DPLL_REQ_SHIFT, }; -static struct clk virtual_ck_mpu = { - .name = "mpu", - .ops = &clkops_null, - .parent = &arm_ck, /* Is smarter alias for */ +static struct omap1_clk virtual_ck_mpu = { + /* Is smarter alias for arm_ck */ + .hw.init = CLK_HW_INIT("mpu", "arm_ck", &omap1_clk_rate_ops, 0), .recalc = &followparent_recalc, .set_rate = &omap1_select_table_rate, .round_rate = &omap1_round_to_table_rate, @@ -643,20 +584,14 @@ static struct clk virtual_ck_mpu = { /* virtual functional clock domain for I2C. Just for making sure that ARMXOR_CK remains active during MPU idle whenever this is enabled */ -static struct clk i2c_fck = { - .name = "i2c_fck", - .ops = &clkops_null, +static struct omap1_clk i2c_fck = { + .hw.init = CLK_HW_INIT("i2c_fck", "armxor_ck", &omap1_clk_gate_ops, 0), .flags = CLOCK_NO_IDLE_PARENT, - .parent = &armxor_ck.clk, - .recalc = &followparent_recalc, }; -static struct clk i2c_ick = { - .name = "i2c_ick", - .ops = &clkops_null, +static struct omap1_clk i2c_ick = { + .hw.init = CLK_HW_INIT("i2c_ick", "armper_ck", &omap1_clk_gate_ops, 0), .flags = CLOCK_NO_IDLE_PARENT, - .parent = &armper_ck.clk, - .recalc = &followparent_recalc, }; /* @@ -665,81 +600,81 @@ static struct clk i2c_ick = { static struct omap_clk omap_clks[] = { /* non-ULPD clocks */ - CLK(NULL, "ck_ref", &ck_ref, CK_16XX | CK_1510 | CK_310 | CK_7XX), - CLK(NULL, "ck_dpll1", &ck_dpll1, CK_16XX | CK_1510 | CK_310 | CK_7XX), + CLK(NULL, "ck_ref", &ck_ref.hw, CK_16XX | CK_1510 | CK_310 | CK_7XX), + CLK(NULL, "ck_dpll1", &ck_dpll1.hw, CK_16XX | CK_1510 | CK_310 | CK_7XX), /* CK_GEN1 clocks */ - CLK(NULL, "ck_dpll1out", &ck_dpll1out.clk, CK_16XX), - CLK(NULL, "ck_sossi", &sossi_ck, CK_16XX), - CLK(NULL, "arm_ck", &arm_ck, CK_16XX | CK_1510 | CK_310), - CLK(NULL, "armper_ck", &armper_ck.clk, CK_16XX | CK_1510 | CK_310), - CLK("omap_gpio.0", "ick", &arm_gpio_ck, CK_1510 | CK_310), - CLK(NULL, "armxor_ck", &armxor_ck.clk, CK_16XX | CK_1510 | CK_310 | CK_7XX), - CLK(NULL, "armtim_ck", &armtim_ck.clk, CK_16XX | CK_1510 | CK_310), - CLK("omap_wdt", "fck", &armwdt_ck.clk, CK_16XX | CK_1510 | CK_310), - CLK("omap_wdt", "ick", &armper_ck.clk, CK_16XX), - CLK("omap_wdt", "ick", &dummy_ck, CK_1510 | CK_310), - CLK(NULL, "arminth_ck", &arminth_ck1510, CK_1510 | CK_310), - CLK(NULL, "arminth_ck", &arminth_ck16xx, CK_16XX), + CLK(NULL, "ck_dpll1out", &ck_dpll1out.clk.hw, CK_16XX), + CLK(NULL, "ck_sossi", &sossi_ck.hw, CK_16XX), + CLK(NULL, "arm_ck", &arm_ck.hw, CK_16XX | CK_1510 | CK_310), + CLK(NULL, "armper_ck", &armper_ck.clk.hw, CK_16XX | CK_1510 | CK_310), + CLK("omap_gpio.0", "ick", &arm_gpio_ck.hw, CK_1510 | CK_310), + CLK(NULL, "armxor_ck", &armxor_ck.clk.hw, CK_16XX | CK_1510 | CK_310 | CK_7XX), + CLK(NULL, "armtim_ck", &armtim_ck.clk.hw, CK_16XX | CK_1510 | CK_310), + CLK("omap_wdt", "fck", &armwdt_ck.clk.hw, CK_16XX | CK_1510 | CK_310), + CLK("omap_wdt", "ick", &armper_ck.clk.hw, CK_16XX), + CLK("omap_wdt", "ick", &dummy_ck.hw, CK_1510 | CK_310), + CLK(NULL, "arminth_ck", &arminth_ck1510.hw, CK_1510 | CK_310), + CLK(NULL, "arminth_ck", &arminth_ck16xx.hw, CK_16XX), /* CK_GEN2 clocks */ - CLK(NULL, "dsp_ck", &dsp_ck, CK_16XX | CK_1510 | CK_310), - CLK(NULL, "dspmmu_ck", &dspmmu_ck, CK_16XX | CK_1510 | CK_310), - CLK(NULL, "dspper_ck", &dspper_ck, CK_16XX | CK_1510 | CK_310), - CLK(NULL, "dspxor_ck", &dspxor_ck, CK_16XX | CK_1510 | CK_310), - CLK(NULL, "dsptim_ck", &dsptim_ck, CK_16XX | CK_1510 | CK_310), + CLK(NULL, "dsp_ck", &dsp_ck.hw, CK_16XX | CK_1510 | CK_310), + CLK(NULL, "dspmmu_ck", &dspmmu_ck.hw, CK_16XX | CK_1510 | CK_310), + CLK(NULL, "dspper_ck", &dspper_ck.hw, CK_16XX | CK_1510 | CK_310), + CLK(NULL, "dspxor_ck", &dspxor_ck.hw, CK_16XX | CK_1510 | CK_310), + CLK(NULL, "dsptim_ck", &dsptim_ck.hw, CK_16XX | CK_1510 | CK_310), /* CK_GEN3 clocks */ - CLK(NULL, "tc_ck", &tc_ck.clk, CK_16XX | CK_1510 | CK_310 | CK_7XX), - CLK(NULL, "tipb_ck", &tipb_ck, CK_1510 | CK_310), - CLK(NULL, "l3_ocpi_ck", &l3_ocpi_ck, CK_16XX | CK_7XX), - CLK(NULL, "tc1_ck", &tc1_ck, CK_16XX), - CLK(NULL, "tc2_ck", &tc2_ck, CK_16XX), - CLK(NULL, "dma_ck", &dma_ck, CK_16XX | CK_1510 | CK_310), - CLK(NULL, "dma_lcdfree_ck", &dma_lcdfree_ck, CK_16XX), - CLK(NULL, "api_ck", &api_ck.clk, CK_16XX | CK_1510 | CK_310 | CK_7XX), - CLK(NULL, "lb_ck", &lb_ck.clk, CK_1510 | CK_310), - CLK(NULL, "rhea1_ck", &rhea1_ck, CK_16XX), - CLK(NULL, "rhea2_ck", &rhea2_ck, CK_16XX), - CLK(NULL, "lcd_ck", &lcd_ck_16xx, CK_16XX | CK_7XX), - CLK(NULL, "lcd_ck", &lcd_ck_1510.clk, CK_1510 | CK_310), + CLK(NULL, "tc_ck", &tc_ck.clk.hw, CK_16XX | CK_1510 | CK_310 | CK_7XX), + CLK(NULL, "tipb_ck", &tipb_ck.hw, CK_1510 | CK_310), + CLK(NULL, "l3_ocpi_ck", &l3_ocpi_ck.hw, CK_16XX | CK_7XX), + CLK(NULL, "tc1_ck", &tc1_ck.hw, CK_16XX), + CLK(NULL, "tc2_ck", &tc2_ck.hw, CK_16XX), + CLK(NULL, "dma_ck", &dma_ck.hw, CK_16XX | CK_1510 | CK_310), + CLK(NULL, "dma_lcdfree_ck", &dma_lcdfree_ck.hw, CK_16XX), + CLK(NULL, "api_ck", &api_ck.clk.hw, CK_16XX | CK_1510 | CK_310 | CK_7XX), + CLK(NULL, "lb_ck", &lb_ck.clk.hw, CK_1510 | CK_310), + CLK(NULL, "rhea1_ck", &rhea1_ck.hw, CK_16XX), + CLK(NULL, "rhea2_ck", &rhea2_ck.hw, CK_16XX), + CLK(NULL, "lcd_ck", &lcd_ck_16xx.hw, CK_16XX | CK_7XX), + CLK(NULL, "lcd_ck", &lcd_ck_1510.clk.hw, CK_1510 | CK_310), /* ULPD clocks */ - CLK(NULL, "uart1_ck", &uart1_1510, CK_1510 | CK_310), - CLK(NULL, "uart1_ck", &uart1_16xx.clk, CK_16XX), - CLK(NULL, "uart1_ck", &uart1_7xx, CK_7XX), - CLK(NULL, "uart2_ck", &uart2_ck, CK_16XX | CK_1510 | CK_310), - CLK(NULL, "uart2_ck", &uart2_7xx, CK_7XX), - CLK(NULL, "uart3_ck", &uart3_1510, CK_1510 | CK_310), - CLK(NULL, "uart3_ck", &uart3_16xx.clk, CK_16XX), - CLK(NULL, "usb_clko", &usb_clko, CK_16XX | CK_1510 | CK_310), - CLK(NULL, "usb_hhc_ck", &usb_hhc_ck1510, CK_1510 | CK_310), - CLK(NULL, "usb_hhc_ck", &usb_hhc_ck16xx, CK_16XX), - CLK(NULL, "usb_dc_ck", &usb_dc_ck, CK_16XX | CK_7XX), - CLK(NULL, "mclk", &mclk_1510, CK_1510 | CK_310), - CLK(NULL, "mclk", &mclk_16xx, CK_16XX), - CLK(NULL, "bclk", &bclk_1510, CK_1510 | CK_310), - CLK(NULL, "bclk", &bclk_16xx, CK_16XX), - CLK("mmci-omap.0", "fck", &mmc1_ck, CK_16XX | CK_1510 | CK_310), - CLK("mmci-omap.0", "fck", &mmc3_ck, CK_7XX), - CLK("mmci-omap.0", "ick", &armper_ck.clk, CK_16XX | CK_1510 | CK_310 | CK_7XX), - CLK("mmci-omap.1", "fck", &mmc2_ck, CK_16XX), - CLK("mmci-omap.1", "ick", &armper_ck.clk, CK_16XX), + CLK(NULL, "uart1_ck", &uart1_1510.hw, CK_1510 | CK_310), + CLK(NULL, "uart1_ck", &uart1_16xx.clk.hw, CK_16XX), + CLK(NULL, "uart1_ck", &uart1_7xx.hw, CK_7XX), + CLK(NULL, "uart2_ck", &uart2_ck.hw, CK_16XX | CK_1510 | CK_310), + CLK(NULL, "uart2_ck", &uart2_7xx.hw, CK_7XX), + CLK(NULL, "uart3_ck", &uart3_1510.hw, CK_1510 | CK_310), + CLK(NULL, "uart3_ck", &uart3_16xx.clk.hw, CK_16XX), + CLK(NULL, "usb_clko", &usb_clko.hw, CK_16XX | CK_1510 | CK_310), + CLK(NULL, "usb_hhc_ck", &usb_hhc_ck1510.hw, CK_1510 | CK_310), + CLK(NULL, "usb_hhc_ck", &usb_hhc_ck16xx.hw, CK_16XX), + CLK(NULL, "usb_dc_ck", &usb_dc_ck.hw, CK_16XX | CK_7XX), + CLK(NULL, "mclk", &mclk_1510.hw, CK_1510 | CK_310), + CLK(NULL, "mclk", &mclk_16xx.hw, CK_16XX), + CLK(NULL, "bclk", &bclk_1510.hw, CK_1510 | CK_310), + CLK(NULL, "bclk", &bclk_16xx.hw, CK_16XX), + CLK("mmci-omap.0", "fck", &mmc1_ck.hw, CK_16XX | CK_1510 | CK_310), + CLK("mmci-omap.0", "fck", &mmc3_ck.hw, CK_7XX), + CLK("mmci-omap.0", "ick", &armper_ck.clk.hw, CK_16XX | CK_1510 | CK_310 | CK_7XX), + CLK("mmci-omap.1", "fck", &mmc2_ck.hw, CK_16XX), + CLK("mmci-omap.1", "ick", &armper_ck.clk.hw, CK_16XX), /* Virtual clocks */ - CLK(NULL, "mpu", &virtual_ck_mpu, CK_16XX | CK_1510 | CK_310), - CLK("omap_i2c.1", "fck", &i2c_fck, CK_16XX | CK_1510 | CK_310 | CK_7XX), - CLK("omap_i2c.1", "ick", &i2c_ick, CK_16XX), - CLK("omap_i2c.1", "ick", &dummy_ck, CK_1510 | CK_310 | CK_7XX), - CLK("omap1_spi100k.1", "fck", &dummy_ck, CK_7XX), - CLK("omap1_spi100k.1", "ick", &dummy_ck, CK_7XX), - CLK("omap1_spi100k.2", "fck", &dummy_ck, CK_7XX), - CLK("omap1_spi100k.2", "ick", &dummy_ck, CK_7XX), - CLK("omap_uwire", "fck", &armxor_ck.clk, CK_16XX | CK_1510 | CK_310), - CLK("omap-mcbsp.1", "ick", &dspper_ck, CK_16XX), - CLK("omap-mcbsp.1", "ick", &dummy_ck, CK_1510 | CK_310), - CLK("omap-mcbsp.2", "ick", &armper_ck.clk, CK_16XX), - CLK("omap-mcbsp.2", "ick", &dummy_ck, CK_1510 | CK_310), - CLK("omap-mcbsp.3", "ick", &dspper_ck, CK_16XX), - CLK("omap-mcbsp.3", "ick", &dummy_ck, CK_1510 | CK_310), - CLK("omap-mcbsp.1", "fck", &dspxor_ck, CK_16XX | CK_1510 | CK_310), - CLK("omap-mcbsp.2", "fck", &armper_ck.clk, CK_16XX | CK_1510 | CK_310), - CLK("omap-mcbsp.3", "fck", &dspxor_ck, CK_16XX | CK_1510 | CK_310), + CLK(NULL, "mpu", &virtual_ck_mpu.hw, CK_16XX | CK_1510 | CK_310), + CLK("omap_i2c.1", "fck", &i2c_fck.hw, CK_16XX | CK_1510 | CK_310 | CK_7XX), + CLK("omap_i2c.1", "ick", &i2c_ick.hw, CK_16XX), + CLK("omap_i2c.1", "ick", &dummy_ck.hw, CK_1510 | CK_310 | CK_7XX), + CLK("omap1_spi100k.1", "fck", &dummy_ck.hw, CK_7XX), + CLK("omap1_spi100k.1", "ick", &dummy_ck.hw, CK_7XX), + CLK("omap1_spi100k.2", "fck", &dummy_ck.hw, CK_7XX), + CLK("omap1_spi100k.2", "ick", &dummy_ck.hw, CK_7XX), + CLK("omap_uwire", "fck", &armxor_ck.clk.hw, CK_16XX | CK_1510 | CK_310), + CLK("omap-mcbsp.1", "ick", &dspper_ck.hw, CK_16XX), + CLK("omap-mcbsp.1", "ick", &dummy_ck.hw, CK_1510 | CK_310), + CLK("omap-mcbsp.2", "ick", &armper_ck.clk.hw, CK_16XX), + CLK("omap-mcbsp.2", "ick", &dummy_ck.hw, CK_1510 | CK_310), + CLK("omap-mcbsp.3", "ick", &dspper_ck.hw, CK_16XX), + CLK("omap-mcbsp.3", "ick", &dummy_ck.hw, CK_1510 | CK_310), + CLK("omap-mcbsp.1", "fck", &dspxor_ck.hw, CK_16XX | CK_1510 | CK_310), + CLK("omap-mcbsp.2", "fck", &armper_ck.clk.hw, CK_16XX | CK_1510 | CK_310), + CLK("omap-mcbsp.3", "fck", &dspxor_ck.hw, CK_16XX | CK_1510 | CK_310), }; /* @@ -778,9 +713,6 @@ int __init omap1_clk_init(void) /* By default all idlect1 clocks are allowed to idle */ arm_idlect1_mask = ~0; - for (c = omap_clks; c < omap_clks + ARRAY_SIZE(omap_clks); c++) - clk_preinit(c->lk.clk); - cpu_mask = 0; if (cpu_is_omap1710()) cpu_mask |= CK_1710; @@ -793,16 +725,10 @@ int __init omap1_clk_init(void) if (cpu_is_omap310()) cpu_mask |= CK_310; - for (c = omap_clks; c < omap_clks + ARRAY_SIZE(omap_clks); c++) - if (c->cpu & cpu_mask) { - clkdev_add(&c->lk); - clk_register(c->lk.clk); - } - /* Pointers to these clocks are needed by code in clock.c */ - api_ck_p = clk_get(NULL, "api_ck"); - ck_dpll1_p = clk_get(NULL, "ck_dpll1"); - ck_ref_p = clk_get(NULL, "ck_ref"); + api_ck_p = &api_ck.clk; + ck_dpll1_p = &ck_dpll1; + ck_ref_p = &ck_ref; if (cpu_is_omap7xx()) ck_ref.rate = 13000000; @@ -844,10 +770,7 @@ int __init omap1_clk_init(void) } } } - propagate_rate(&ck_dpll1); - /* Cache rates for clocks connected to ck_ref (not dpll1) */ - propagate_rate(&ck_ref); - omap1_show_rates(); + if (machine_is_omap_perseus2() || machine_is_omap_fsample()) { /* Select slicer output as OMAP input clock */ omap_writew(omap_readw(OMAP7XX_PCC_UPLD_CTRL) & ~0x1, @@ -879,16 +802,28 @@ int __init omap1_clk_init(void) */ omap_writew(0x0000, ARM_IDLECT2); /* Turn LCD clock off also */ - /* - * Only enable those clocks we will need, let the drivers - * enable other clocks as necessary - */ - clk_enable(&armper_ck.clk); - clk_enable(&armxor_ck.clk); - clk_enable(&armtim_ck.clk); /* This should be done by timer code */ + for (c = omap_clks; c < omap_clks + ARRAY_SIZE(omap_clks); c++) { + if (!(c->cpu & cpu_mask)) + continue; + + if (c->lk.clk_hw->init) { /* NULL if provider already registered */ + const struct clk_init_data *init = c->lk.clk_hw->init; + const char *name = c->lk.clk_hw->init->name; + int err; + + err = clk_hw_register(NULL, c->lk.clk_hw); + if (err < 0) { + pr_err("failed to register clock \"%s\"! (%d)\n", name, err); + /* may be tried again, restore init data */ + c->lk.clk_hw->init = init; + continue; + } + } + + clk_hw_register_clkdev(c->lk.clk_hw, c->lk.con_id, c->lk.dev_id); + } - if (cpu_is_omap15xx()) - clk_enable(&arm_gpio_ck); + omap1_show_rates(); return 0; } @@ -900,7 +835,7 @@ void __init omap1_clk_late_init(void) unsigned long rate = ck_dpll1.rate; /* Find the highest supported frequency and enable it */ - if (omap1_select_table_rate(&virtual_ck_mpu, ~0)) { + if (omap1_select_table_rate(&virtual_ck_mpu, ~0, arm_ck.rate)) { pr_err("System frequencies not set, using default. Check your config.\n"); /* * Reprogramming the DPLL is tricky, it must be done from SRAM. diff --git a/arch/arm/mach-omap1/hardware.h b/arch/arm/mach-omap1/hardware.h index 738becbd2972..c228234a1ed4 100644 --- a/arch/arm/mach-omap1/hardware.h +++ b/arch/arm/mach-omap1/hardware.h @@ -64,7 +64,7 @@ static inline u32 omap_cs3_phys(void) #define OMAP1_IO_OFFSET 0x00f00000 /* Virtual IO = 0xff0b0000 */ #define OMAP1_IO_ADDRESS(pa) IOMEM((pa) - OMAP1_IO_OFFSET) -#include <mach/serial.h> +#include "serial.h" /* * --------------------------------------------------------------------------- diff --git a/arch/arm/mach-omap1/include/mach/uncompress.h b/arch/arm/mach-omap1/include/mach/uncompress.h deleted file mode 100644 index 9cca6a56788f..000000000000 --- a/arch/arm/mach-omap1/include/mach/uncompress.h +++ /dev/null @@ -1,117 +0,0 @@ -/* - * arch/arm/plat-omap/include/mach/uncompress.h - * - * Serial port stubs for kernel decompress status messages - * - * Initially based on: - * linux-2.4.15-rmk1-dsplinux1.6/arch/arm/plat-omap/include/mach1510/uncompress.h - * Copyright (C) 2000 RidgeRun, Inc. - * Author: Greg Lonnon <glonnon@ridgerun.com> - * - * Rewritten by: - * Author: <source@mvista.com> - * 2004 (c) MontaVista Software, Inc. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. - */ - -#include <linux/types.h> -#include <linux/serial_reg.h> - -#include <asm/memory.h> -#include <asm/mach-types.h> - -#include "serial.h" - -#define MDR1_MODE_MASK 0x07 - -volatile u8 *uart_base; -int uart_shift; - -/* - * Store the DEBUG_LL uart number into memory. - * See also debug-macro.S, and serial.c for related code. - */ -static void set_omap_uart_info(unsigned char port) -{ - /* - * Get address of some.bss variable and round it down - * a la CONFIG_AUTO_ZRELADDR. - */ - u32 ram_start = (u32)&uart_shift & 0xf8000000; - u32 *uart_info = (u32 *)(ram_start + OMAP_UART_INFO_OFS); - *uart_info = port; -} - -static inline void putc(int c) -{ - if (!uart_base) - return; - - /* Check for UART 16x mode */ - if ((uart_base[UART_OMAP_MDR1 << uart_shift] & MDR1_MODE_MASK) != 0) - return; - - while (!(uart_base[UART_LSR << uart_shift] & UART_LSR_THRE)) - barrier(); - uart_base[UART_TX << uart_shift] = c; -} - -static inline void flush(void) -{ -} - -/* - * Macros to configure UART1 and debug UART - */ -#define _DEBUG_LL_ENTRY(mach, dbg_uart, dbg_shft, dbg_id) \ - if (machine_is_##mach()) { \ - uart_base = (volatile u8 *)(dbg_uart); \ - uart_shift = (dbg_shft); \ - port = (dbg_id); \ - set_omap_uart_info(port); \ - break; \ - } - -#define DEBUG_LL_OMAP7XX(p, mach) \ - _DEBUG_LL_ENTRY(mach, OMAP1_UART##p##_BASE, OMAP7XX_PORT_SHIFT, \ - OMAP1UART##p) - -#define DEBUG_LL_OMAP1(p, mach) \ - _DEBUG_LL_ENTRY(mach, OMAP1_UART##p##_BASE, OMAP_PORT_SHIFT, \ - OMAP1UART##p) - -static inline void arch_decomp_setup(void) -{ - int port = 0; - - /* - * Initialize the port based on the machine ID from the bootloader. - * Note that we're using macros here instead of switch statement - * as machine_is functions are optimized out for the boards that - * are not selected. - */ - do { - /* omap7xx/8xx based boards using UART1 with shift 0 */ - DEBUG_LL_OMAP7XX(1, herald); - DEBUG_LL_OMAP7XX(1, omap_perseus2); - - /* omap15xx/16xx based boards using UART1 */ - DEBUG_LL_OMAP1(1, ams_delta); - DEBUG_LL_OMAP1(1, nokia770); - DEBUG_LL_OMAP1(1, omap_h2); - DEBUG_LL_OMAP1(1, omap_h3); - DEBUG_LL_OMAP1(1, omap_innovator); - DEBUG_LL_OMAP1(1, omap_osk); - DEBUG_LL_OMAP1(1, omap_palmte); - DEBUG_LL_OMAP1(1, omap_palmz71); - - /* omap15xx/16xx based boards using UART2 */ - DEBUG_LL_OMAP1(2, omap_palmtt); - - /* omap15xx/16xx based boards using UART3 */ - DEBUG_LL_OMAP1(3, sx1); - } while (0); -} diff --git a/arch/arm/mach-omap1/io.c b/arch/arm/mach-omap1/io.c index 05ee260918fa..d2db9b8aed3f 100644 --- a/arch/arm/mach-omap1/io.c +++ b/arch/arm/mach-omap1/io.c @@ -15,10 +15,8 @@ #include <asm/mach/map.h> #include "tc.h" -#include "mux.h" #include "iomap.h" #include "common.h" -#include "clock.h" /* * The machine specific code may provide the extra mapping besides the @@ -125,11 +123,6 @@ void __init omap1_init_early(void) */ omap_writew(0x0, MPU_PUBLIC_TIPB_CNTL); omap_writew(0x0, MPU_PRIVATE_TIPB_CNTL); - - /* Must init clocks early to assure that timer interrupt works - */ - omap1_clk_init(); - omap1_mux_init(); } void __init omap1_init_late(void) diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c index 299ae1106187..88928fc33b2e 100644 --- a/arch/arm/mach-omap1/serial.c +++ b/arch/arm/mach-omap1/serial.c @@ -19,8 +19,7 @@ #include <asm/mach-types.h> -#include <mach/serial.h> - +#include "serial.h" #include "mux.h" #include "pm.h" #include "soc.h" diff --git a/arch/arm/mach-omap1/include/mach/serial.h b/arch/arm/mach-omap1/serial.h index 4700e384c3d9..4700e384c3d9 100644 --- a/arch/arm/mach-omap1/include/mach/serial.h +++ b/arch/arm/mach-omap1/serial.h diff --git a/arch/arm/mach-omap1/time.c b/arch/arm/mach-omap1/time.c index c34b9af00566..d5e127851dc7 100644 --- a/arch/arm/mach-omap1/time.c +++ b/arch/arm/mach-omap1/time.c @@ -51,8 +51,10 @@ #include <asm/mach/time.h> #include "hardware.h" +#include "mux.h" #include "iomap.h" #include "common.h" +#include "clock.h" #ifdef CONFIG_OMAP_MPU_TIMER @@ -224,6 +226,9 @@ static inline void omap_mpu_timer_init(void) */ void __init omap1_timer_init(void) { + omap1_clk_init(); + omap1_mux_init(); + if (omap_32k_timer_init() != 0) omap_mpu_timer_init(); } |