diff options
author | Russell King <rmk+kernel@arm.linux.org.uk> | 2015-04-04 20:09:46 +0100 |
---|---|---|
committer | Russell King <rmk+kernel@arm.linux.org.uk> | 2015-06-01 23:48:19 +0100 |
commit | b2c3e38a54714e917c9e8675ff5812dca1c0f39d (patch) | |
tree | 0d5e9747b2c73ccd4c961c8d6a50841b52cf11fd /arch | |
parent | 1221ed10f2a56ecdd8ff75f436f52aca5ba0f1d3 (diff) |
ARM: redo TTBR setup code for LPAE
Re-engineer the LPAE TTBR setup code. Rather than passing some shifted
address in order to fit in a CPU register, pass either a full physical
address (in the case of r4, r5 for TTBR0) or a PFN (for TTBR1).
This removes the ARCH_PGD_SHIFT hack, and the last dangerous user of
cpu_set_ttbr() in the secondary CPU startup code path (which was there
to re-set TTBR1 to the appropriate high physical address space on
Keystone2.)
Tested-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Diffstat (limited to 'arch')
-rw-r--r-- | arch/arm/include/asm/memory.h | 16 | ||||
-rw-r--r-- | arch/arm/include/asm/proc-fns.h | 7 | ||||
-rw-r--r-- | arch/arm/include/asm/smp.h | 2 | ||||
-rw-r--r-- | arch/arm/kernel/head-nommu.S | 2 | ||||
-rw-r--r-- | arch/arm/kernel/head.S | 42 | ||||
-rw-r--r-- | arch/arm/kernel/smp.c | 10 | ||||
-rw-r--r-- | arch/arm/mach-keystone/platsmp.c | 13 | ||||
-rw-r--r-- | arch/arm/mm/proc-v7-2level.S | 6 | ||||
-rw-r--r-- | arch/arm/mm/proc-v7-3level.S | 14 | ||||
-rw-r--r-- | arch/arm/mm/proc-v7.S | 26 |
10 files changed, 60 insertions, 78 deletions
diff --git a/arch/arm/include/asm/memory.h b/arch/arm/include/asm/memory.h index 184def0e1652..3a72d69b3255 100644 --- a/arch/arm/include/asm/memory.h +++ b/arch/arm/include/asm/memory.h @@ -18,8 +18,6 @@ #include <linux/types.h> #include <linux/sizes.h> -#include <asm/cache.h> - #ifdef CONFIG_NEED_MACH_MEMORY_H #include <mach/memory.h> #endif @@ -133,20 +131,6 @@ #define phys_to_page(phys) (pfn_to_page(__phys_to_pfn(phys))) /* - * Minimum guaranted alignment in pgd_alloc(). The page table pointers passed - * around in head.S and proc-*.S are shifted by this amount, in order to - * leave spare high bits for systems with physical address extension. This - * does not fully accomodate the 40-bit addressing capability of ARM LPAE, but - * gives us about 38-bits or so. - */ -#ifdef CONFIG_ARM_LPAE -#define ARCH_PGD_SHIFT L1_CACHE_SHIFT -#else -#define ARCH_PGD_SHIFT 0 -#endif -#define ARCH_PGD_MASK ((1 << ARCH_PGD_SHIFT) - 1) - -/* * PLAT_PHYS_OFFSET is the offset (from zero) of the start of physical * memory. This is used for XIP and NoMMU kernels, and on platforms that don't * have CONFIG_ARM_PATCH_PHYS_VIRT. Assembly code must always use diff --git a/arch/arm/include/asm/proc-fns.h b/arch/arm/include/asm/proc-fns.h index 5324c1112f3a..8877ad5ffe10 100644 --- a/arch/arm/include/asm/proc-fns.h +++ b/arch/arm/include/asm/proc-fns.h @@ -125,13 +125,6 @@ extern void cpu_resume(void); ttbr; \ }) -#define cpu_set_ttbr(nr, val) \ - do { \ - u64 ttbr = val; \ - __asm__("mcrr p15, " #nr ", %Q0, %R0, c2" \ - : : "r" (ttbr)); \ - } while (0) - #define cpu_get_pgd() \ ({ \ u64 pg = cpu_get_ttbr(0); \ diff --git a/arch/arm/include/asm/smp.h b/arch/arm/include/asm/smp.h index 18f5a554134f..487aa08f31ee 100644 --- a/arch/arm/include/asm/smp.h +++ b/arch/arm/include/asm/smp.h @@ -61,7 +61,7 @@ asmlinkage void secondary_start_kernel(void); struct secondary_data { union { unsigned long mpu_rgn_szr; - unsigned long pgdir; + u64 pgdir; }; unsigned long swapper_pg_dir; void *stack; diff --git a/arch/arm/kernel/head-nommu.S b/arch/arm/kernel/head-nommu.S index aebfbf79a1a3..84da14b7cd04 100644 --- a/arch/arm/kernel/head-nommu.S +++ b/arch/arm/kernel/head-nommu.S @@ -123,7 +123,7 @@ ENTRY(secondary_startup) ENDPROC(secondary_startup) ENTRY(__secondary_switched) - ldr sp, [r7, #8] @ set up the stack pointer + ldr sp, [r7, #12] @ set up the stack pointer mov fp, #0 b secondary_start_kernel ENDPROC(__secondary_switched) diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S index 3637973a9708..7304b4c44b52 100644 --- a/arch/arm/kernel/head.S +++ b/arch/arm/kernel/head.S @@ -131,13 +131,30 @@ ENTRY(stext) * The following calls CPU specific code in a position independent * manner. See arch/arm/mm/proc-*.S for details. r10 = base of * xxx_proc_info structure selected by __lookup_processor_type - * above. On return, the CPU will be ready for the MMU to be - * turned on, and r0 will hold the CPU control register value. + * above. + * + * The processor init function will be called with: + * r1 - machine type + * r2 - boot data (atags/dt) pointer + * r4 - translation table base (low word) + * r5 - translation table base (high word, if LPAE) + * r8 - translation table base 1 (pfn if LPAE) + * r9 - cpuid + * r13 - virtual address for __enable_mmu -> __turn_mmu_on + * + * On return, the CPU will be ready for the MMU to be turned on, + * r0 will hold the CPU control register value, r1, r2, r4, and + * r9 will be preserved. r5 will also be preserved if LPAE. */ ldr r13, =__mmap_switched @ address to jump to after @ mmu has been enabled adr lr, BSYM(1f) @ return (PIC) address +#ifdef CONFIG_ARM_LPAE + mov r5, #0 @ high TTBR0 + mov r8, r4, lsr #12 @ TTBR1 is swapper_pg_dir pfn +#else mov r8, r4 @ set TTBR1 to swapper_pg_dir +#endif ldr r12, [r10, #PROCINFO_INITFUNC] add r12, r12, r10 ret r12 @@ -158,7 +175,7 @@ ENDPROC(stext) * * Returns: * r0, r3, r5-r7 corrupted - * r4 = page table (see ARCH_PGD_SHIFT in asm/memory.h) + * r4 = physical page table address */ __create_page_tables: pgtbl r4, r8 @ page table address @@ -333,7 +350,6 @@ __create_page_tables: #endif #ifdef CONFIG_ARM_LPAE sub r4, r4, #0x1000 @ point to the PGD table - mov r4, r4, lsr #ARCH_PGD_SHIFT #endif ret lr ENDPROC(__create_page_tables) @@ -381,9 +397,9 @@ ENTRY(secondary_startup) adr r4, __secondary_data ldmia r4, {r5, r7, r12} @ address to jump to after sub lr, r4, r5 @ mmu has been enabled - ldr r4, [r7, lr] @ get secondary_data.pgdir - add r7, r7, #4 - ldr r8, [r7, lr] @ get secondary_data.swapper_pg_dir + add r3, r7, lr + ldrd r4, [r3, #0] @ get secondary_data.pgdir + ldr r8, [r3, #8] @ get secondary_data.swapper_pg_dir adr lr, BSYM(__enable_mmu) @ return address mov r13, r12 @ __secondary_switched address ldr r12, [r10, #PROCINFO_INITFUNC] @@ -397,7 +413,7 @@ ENDPROC(secondary_startup_arm) * r6 = &secondary_data */ ENTRY(__secondary_switched) - ldr sp, [r7, #4] @ get secondary_data.stack + ldr sp, [r7, #12] @ get secondary_data.stack mov fp, #0 b secondary_start_kernel ENDPROC(__secondary_switched) @@ -416,12 +432,14 @@ __secondary_data: /* * Setup common bits before finally enabling the MMU. Essentially * this is just loading the page table pointer and domain access - * registers. + * registers. All these registers need to be preserved by the + * processor setup function (or set in the case of r0) * * r0 = cp#15 control register * r1 = machine ID * r2 = atags or dtb pointer - * r4 = page table (see ARCH_PGD_SHIFT in asm/memory.h) + * r4 = TTBR pointer (low word) + * r5 = TTBR pointer (high word if LPAE) * r9 = processor ID * r13 = *virtual* address to jump to upon completion */ @@ -440,7 +458,9 @@ __enable_mmu: #ifdef CONFIG_CPU_ICACHE_DISABLE bic r0, r0, #CR_I #endif -#ifndef CONFIG_ARM_LPAE +#ifdef CONFIG_ARM_LPAE + mcrr p15, 0, r4, r5, c2 @ load TTBR0 +#else mov r5, #(domain_val(DOMAIN_USER, DOMAIN_MANAGER) | \ domain_val(DOMAIN_KERNEL, DOMAIN_MANAGER) | \ domain_val(DOMAIN_TABLE, DOMAIN_MANAGER) | \ diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c index cca5b8758185..90dfbedfbfb8 100644 --- a/arch/arm/kernel/smp.c +++ b/arch/arm/kernel/smp.c @@ -86,9 +86,11 @@ void __init smp_set_ops(struct smp_operations *ops) static unsigned long get_arch_pgd(pgd_t *pgd) { - phys_addr_t pgdir = virt_to_idmap(pgd); - BUG_ON(pgdir & ARCH_PGD_MASK); - return pgdir >> ARCH_PGD_SHIFT; +#ifdef CONFIG_ARM_LPAE + return __phys_to_pfn(virt_to_phys(pgd)); +#else + return virt_to_phys(pgd); +#endif } int __cpu_up(unsigned int cpu, struct task_struct *idle) @@ -108,7 +110,7 @@ int __cpu_up(unsigned int cpu, struct task_struct *idle) #endif #ifdef CONFIG_MMU - secondary_data.pgdir = get_arch_pgd(idmap_pgd); + secondary_data.pgdir = virt_to_phys(idmap_pgd); secondary_data.swapper_pg_dir = get_arch_pgd(swapper_pg_dir); #endif sync_cache_w(&secondary_data); diff --git a/arch/arm/mach-keystone/platsmp.c b/arch/arm/mach-keystone/platsmp.c index 5f46a7cf907b..4bbb18463bfd 100644 --- a/arch/arm/mach-keystone/platsmp.c +++ b/arch/arm/mach-keystone/platsmp.c @@ -39,19 +39,6 @@ static int keystone_smp_boot_secondary(unsigned int cpu, return error; } -#ifdef CONFIG_ARM_LPAE -static void __cpuinit keystone_smp_secondary_initmem(unsigned int cpu) -{ - pgd_t *pgd0 = pgd_offset_k(0); - cpu_set_ttbr(1, __pa(pgd0) + TTBR1_OFFSET); - local_flush_tlb_all(); -} -#else -static inline void __cpuinit keystone_smp_secondary_initmem(unsigned int cpu) -{} -#endif - struct smp_operations keystone_smp_ops __initdata = { .smp_boot_secondary = keystone_smp_boot_secondary, - .smp_secondary_init = keystone_smp_secondary_initmem, }; diff --git a/arch/arm/mm/proc-v7-2level.S b/arch/arm/mm/proc-v7-2level.S index 10405b8d31af..fa385140715f 100644 --- a/arch/arm/mm/proc-v7-2level.S +++ b/arch/arm/mm/proc-v7-2level.S @@ -148,10 +148,10 @@ ENDPROC(cpu_v7_set_pte_ext) * Macro for setting up the TTBRx and TTBCR registers. * - \ttb0 and \ttb1 updated with the corresponding flags. */ - .macro v7_ttb_setup, zero, ttbr0, ttbr1, tmp + .macro v7_ttb_setup, zero, ttbr0l, ttbr0h, ttbr1, tmp mcr p15, 0, \zero, c2, c0, 2 @ TTB control register - ALT_SMP(orr \ttbr0, \ttbr0, #TTB_FLAGS_SMP) - ALT_UP(orr \ttbr0, \ttbr0, #TTB_FLAGS_UP) + ALT_SMP(orr \ttbr0l, \ttbr0l, #TTB_FLAGS_SMP) + ALT_UP(orr \ttbr0l, \ttbr0l, #TTB_FLAGS_UP) ALT_SMP(orr \ttbr1, \ttbr1, #TTB_FLAGS_SMP) ALT_UP(orr \ttbr1, \ttbr1, #TTB_FLAGS_UP) mcr p15, 0, \ttbr1, c2, c0, 1 @ load TTB1 diff --git a/arch/arm/mm/proc-v7-3level.S b/arch/arm/mm/proc-v7-3level.S index d3daed0ae0ad..5e5720e8bc5f 100644 --- a/arch/arm/mm/proc-v7-3level.S +++ b/arch/arm/mm/proc-v7-3level.S @@ -126,11 +126,10 @@ ENDPROC(cpu_v7_set_pte_ext) * Macro for setting up the TTBRx and TTBCR registers. * - \ttbr1 updated. */ - .macro v7_ttb_setup, zero, ttbr0, ttbr1, tmp + .macro v7_ttb_setup, zero, ttbr0l, ttbr0h, ttbr1, tmp ldr \tmp, =swapper_pg_dir @ swapper_pg_dir virtual address - mov \tmp, \tmp, lsr #ARCH_PGD_SHIFT - cmp \ttbr1, \tmp @ PHYS_OFFSET > PAGE_OFFSET? - mrc p15, 0, \tmp, c2, c0, 2 @ TTB control register + cmp \ttbr1, \tmp, lsr #12 @ PHYS_OFFSET > PAGE_OFFSET? + mrc p15, 0, \tmp, c2, c0, 2 @ TTB control egister orr \tmp, \tmp, #TTB_EAE ALT_SMP(orr \tmp, \tmp, #TTB_FLAGS_SMP) ALT_UP(orr \tmp, \tmp, #TTB_FLAGS_UP) @@ -143,13 +142,10 @@ ENDPROC(cpu_v7_set_pte_ext) */ orrls \tmp, \tmp, #TTBR1_SIZE @ TTBCR.T1SZ mcr p15, 0, \tmp, c2, c0, 2 @ TTBCR - mov \tmp, \ttbr1, lsr #(32 - ARCH_PGD_SHIFT) @ upper bits - mov \ttbr1, \ttbr1, lsl #ARCH_PGD_SHIFT @ lower bits + mov \tmp, \ttbr1, lsr #20 + mov \ttbr1, \ttbr1, lsl #12 addls \ttbr1, \ttbr1, #TTBR1_OFFSET mcrr p15, 1, \ttbr1, \tmp, c2 @ load TTBR1 - mov \tmp, \ttbr0, lsr #(32 - ARCH_PGD_SHIFT) @ upper bits - mov \ttbr0, \ttbr0, lsl #ARCH_PGD_SHIFT @ lower bits - mcrr p15, 0, \ttbr0, \tmp, c2 @ load TTBR0 .endm /* diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S index 3d1054f11a8a..873230912894 100644 --- a/arch/arm/mm/proc-v7.S +++ b/arch/arm/mm/proc-v7.S @@ -343,9 +343,9 @@ __v7_setup: and r10, r0, #0xff000000 @ ARM? teq r10, #0x41000000 bne 3f - and r5, r0, #0x00f00000 @ variant + and r3, r0, #0x00f00000 @ variant and r6, r0, #0x0000000f @ revision - orr r6, r6, r5, lsr #20-4 @ combine variant and revision + orr r6, r6, r3, lsr #20-4 @ combine variant and revision ubfx r0, r0, #4, #12 @ primary part number /* Cortex-A8 Errata */ @@ -354,7 +354,7 @@ __v7_setup: bne 2f #if defined(CONFIG_ARM_ERRATA_430973) && !defined(CONFIG_ARCH_MULTIPLATFORM) - teq r5, #0x00100000 @ only present in r1p* + teq r3, #0x00100000 @ only present in r1p* mrceq p15, 0, r10, c1, c0, 1 @ read aux control register orreq r10, r10, #(1 << 6) @ set IBE to 1 mcreq p15, 0, r10, c1, c0, 1 @ write aux control register @@ -395,7 +395,7 @@ __v7_setup: mcreq p15, 0, r10, c15, c0, 1 @ write diagnostic register #endif #ifdef CONFIG_ARM_ERRATA_743622 - teq r5, #0x00200000 @ only present in r2p* + teq r3, #0x00200000 @ only present in r2p* mrceq p15, 0, r10, c15, c0, 1 @ read diagnostic register orreq r10, r10, #1 << 6 @ set bit #6 mcreq p15, 0, r10, c15, c0, 1 @ write diagnostic register @@ -425,10 +425,10 @@ __v7_setup: mcr p15, 0, r10, c7, c5, 0 @ I+BTB cache invalidate #ifdef CONFIG_MMU mcr p15, 0, r10, c8, c7, 0 @ invalidate I + D TLBs - v7_ttb_setup r10, r4, r8, r5 @ TTBCR, TTBRx setup - ldr r5, =PRRR @ PRRR + v7_ttb_setup r10, r4, r5, r8, r3 @ TTBCR, TTBRx setup + ldr r3, =PRRR @ PRRR ldr r6, =NMRR @ NMRR - mcr p15, 0, r5, c10, c2, 0 @ write PRRR + mcr p15, 0, r3, c10, c2, 0 @ write PRRR mcr p15, 0, r6, c10, c2, 1 @ write NMRR #endif dsb @ Complete invalidations @@ -437,22 +437,22 @@ __v7_setup: and r0, r0, #(0xf << 12) @ ThumbEE enabled field teq r0, #(1 << 12) @ check if ThumbEE is present bne 1f - mov r5, #0 - mcr p14, 6, r5, c1, c0, 0 @ Initialize TEEHBR to 0 + mov r3, #0 + mcr p14, 6, r3, c1, c0, 0 @ Initialize TEEHBR to 0 mrc p14, 6, r0, c0, c0, 0 @ load TEECR orr r0, r0, #1 @ set the 1st bit in order to mcr p14, 6, r0, c0, c0, 0 @ stop userspace TEEHBR access 1: #endif - adr r5, v7_crval - ldmia r5, {r5, r6} + adr r3, v7_crval + ldmia r3, {r3, r6} ARM_BE8(orr r6, r6, #1 << 25) @ big-endian page tables #ifdef CONFIG_SWP_EMULATE - orr r5, r5, #(1 << 10) @ set SW bit in "clear" + orr r3, r3, #(1 << 10) @ set SW bit in "clear" bic r6, r6, #(1 << 10) @ clear it in "mmuset" #endif mrc p15, 0, r0, c1, c0, 0 @ read control register - bic r0, r0, r5 @ clear bits them + bic r0, r0, r3 @ clear bits them orr r0, r0, r6 @ set them THUMB( orr r0, r0, #1 << 30 ) @ Thumb exceptions ret lr @ return to head.S:__ret |