diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2020-12-22 13:34:27 -0800 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2020-12-22 13:34:27 -0800 |
| commit | c45647f9f562b52915b43b6bb447827cebf511bd (patch) | |
| tree | 150ddfa8007d02088dcf3d4bb27204af58fb6658 /arch | |
| parent | d8355e740f419a081796e869bafdfc0756b0bf2a (diff) | |
| parent | ecbbb88727aee7880527d4b320b4d06dde75d46d (diff) | |
Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux
Pull ARM updates from Russell King:
- Rework phys/virt translation
- Add KASan support
- Move DT out of linear map region
- Use more PC-relative addressing in assembly
- Remove FP emulation handling while in kernel mode
- Link with '-z norelro'
- remove old check for GCC <= 4.2 in ARM unwinder code
- disable big endian if using clang's linker
* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: (46 commits)
ARM: 9027/1: head.S: explicitly map DT even if it lives in the first physical section
ARM: 9038/1: Link with '-z norelro'
ARM: 9037/1: uncompress: Add OF_DT_MAGIC macro
ARM: 9036/1: uncompress: Fix dbgadtb size parameter name
ARM: 9035/1: uncompress: Add be32tocpu macro
ARM: 9033/1: arm/smp: Drop the macro S(x,s)
ARM: 9032/1: arm/mm: Convert PUD level pgtable helper macros into functions
ARM: 9031/1: hyp-stub: remove unused .L__boot_cpu_mode_offset symbol
ARM: 9044/1: vfp: use undef hook for VFP support detection
ARM: 9034/1: __div64_32(): straighten up inline asm constraints
ARM: 9030/1: entry: omit FP emulation for UND exceptions taken in kernel mode
ARM: 9029/1: Make iwmmxt.S support Clang's integrated assembler
ARM: 9028/1: disable KASAN in call stack capturing routines
ARM: 9026/1: unwind: remove old check for GCC <= 4.2
ARM: 9025/1: Kconfig: CPU_BIG_ENDIAN depends on !LD_IS_LLD
ARM: 9024/1: Drop useless cast of "u64" to "long long"
ARM: 9023/1: Spelling s/mmeory/memory/
ARM: 9022/1: Change arch/arm/lib/mem*.S to use WEAK instead of .weak
ARM: kvm: replace open coded VA->PA calculations with adr_l call
ARM: head.S: use PC relative insn sequence to calculate PHYS_OFFSET
...
Diffstat (limited to 'arch')
50 files changed, 1256 insertions, 473 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index b8ade91281bc..138248999df7 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -68,6 +68,7 @@ config ARM select HAVE_ARCH_BITREVERSE if (CPU_32v7M || CPU_32v7) && !CPU_32v6 select HAVE_ARCH_JUMP_LABEL if !XIP_KERNEL && !CPU_ENDIAN_BE32 && MMU select HAVE_ARCH_KGDB if !CPU_ENDIAN_BE32 && MMU + select HAVE_ARCH_KASAN if MMU && !XIP_KERNEL select HAVE_ARCH_MMAP_RND_BITS if MMU select HAVE_ARCH_PFN_VALID select HAVE_ARCH_SECCOMP @@ -245,7 +246,7 @@ config ARM_PATCH_PHYS_VIRT kernel in system memory. This can only be used with non-XIP MMU kernels where the base - of physical memory is at a 16MB boundary. + of physical memory is at a 2 MiB boundary. Only disable this option if you know that you do not require this feature (eg, building a kernel for a single machine) and @@ -1298,6 +1299,15 @@ config PAGE_OFFSET default 0xB0000000 if VMSPLIT_3G_OPT default 0xC0000000 +config KASAN_SHADOW_OFFSET + hex + depends on KASAN + default 0x1f000000 if PAGE_OFFSET=0x40000000 + default 0x5f000000 if PAGE_OFFSET=0x80000000 + default 0x9f000000 if PAGE_OFFSET=0xC0000000 + default 0x8f000000 if PAGE_OFFSET=0xB0000000 + default 0xffffffff + config NR_CPUS int "Maximum number of CPUs (2-32)" range 2 32 diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 4a066c687cec..4aaec9599e8a 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -10,7 +10,7 @@ # # Copyright (C) 1995-2001 by Russell King -LDFLAGS_vmlinux := --no-undefined -X --pic-veneer +LDFLAGS_vmlinux := --no-undefined -X --pic-veneer -z norelro ifeq ($(CONFIG_CPU_ENDIAN_BE8),y) LDFLAGS_vmlinux += --be8 KBUILD_LDFLAGS_MODULE += --be8 diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile index e1567418a2b1..fb521efcc6c2 100644 --- a/arch/arm/boot/compressed/Makefile +++ b/arch/arm/boot/compressed/Makefile @@ -24,6 +24,7 @@ OBJS += hyp-stub.o endif GCOV_PROFILE := n +KASAN_SANITIZE := n # Prevents link failures: __sanitizer_cov_trace_pc() is not linked in. KCOV_INSTRUMENT := n diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S index caa27322a0ab..d9cce7238a36 100644 --- a/arch/arm/boot/compressed/head.S +++ b/arch/arm/boot/compressed/head.S @@ -11,6 +11,12 @@ #include "efi-header.S" +#ifdef __ARMEB__ +#define OF_DT_MAGIC 0xd00dfeed +#else +#define OF_DT_MAGIC 0xedfe0dd0 +#endif + AR_CLASS( .arch armv7-a ) M_CLASS( .arch armv7-m ) @@ -116,7 +122,7 @@ /* * Debug print of the final appended DTB location */ - .macro dbgadtb, begin, end + .macro dbgadtb, begin, size #ifdef DEBUG kputc #'D' kputc #'T' @@ -129,7 +135,7 @@ kputc #'(' kputc #'0' kputc #'x' - kphex \end, 8 /* End of appended DTB */ + kphex \size, 8 /* Size of appended DTB */ kputc #')' kputc #'\n' #endif @@ -165,6 +171,16 @@ orr \res, \res, \tmp1, lsl #24 .endm + .macro be32tocpu, val, tmp +#ifndef __ARMEB__ + /* convert to little endian */ + eor \tmp, \val, \val, ror #16 + bic \tmp, \tmp, #0x00ff0000 + mov \val, \val, ror #8 + eor \val, \val, \tmp, lsr #8 +#endif + .endm + .section ".start", "ax" /* * sort out different calling conventions @@ -325,11 +341,7 @@ restart: adr r0, LC1 */ ldr lr, [r6, #0] -#ifndef __ARMEB__ - ldr r1, =0xedfe0dd0 @ sig is 0xd00dfeed big endian -#else - ldr r1, =0xd00dfeed -#endif + ldr r1, =OF_DT_MAGIC cmp lr, r1 bne dtb_check_done @ not found @@ -345,13 +357,7 @@ restart: adr r0, LC1 /* Get the initial DTB size */ ldr r5, [r6, #4] -#ifndef __ARMEB__ - /* convert to little endian */ - eor r1, r5, r5, ror #16 - bic r1, r1, #0x00ff0000 - mov r5, r5, ror #8 - eor r5, r5, r1, lsr #8 -#endif + be32tocpu r5, r1 dbgadtb r6, r5 /* 50% DTB growth should be good enough */ add r5, r5, r5, lsr #1 @@ -403,13 +409,7 @@ restart: adr r0, LC1 /* Get the current DTB size */ ldr r5, [r6, #4] -#ifndef __ARMEB__ - /* convert r5 (dtb size) to little endian */ - eor r1, r5, r5, ror #16 - bic r1, r1, #0x00ff0000 - mov r5, r5, ror #8 - eor r5, r5, r1, lsr #8 -#endif + be32tocpu r5, r1 /* preserve 64-bit alignment */ add r5, r5, #7 @@ -468,15 +468,10 @@ dtb_check_done: /* * Compute the address of the hyp vectors after relocation. - * This requires some arithmetic since we cannot directly - * reference __hyp_stub_vectors in a PC-relative way. * Call __hyp_set_vectors with the new address so that we * can HVC again after the copy. */ -0: adr r0, 0b - movw r1, #:lower16:__hyp_stub_vectors - 0b - movt r1, #:upper16:__hyp_stub_vectors - 0b - add r0, r0, r1 + adr_l r0, __hyp_stub_vectors sub r0, r0, r5 add r0, r0, r10 bl __hyp_set_vectors @@ -627,17 +622,11 @@ not_relocated: mov r0, #0 cmp r0, #HYP_MODE @ if not booted in HYP mode... bne __enter_kernel @ boot kernel directly - adr r12, .L__hyp_reentry_vectors_offset - ldr r0, [r12] - add r0, r0, r12 - + adr_l r0, __hyp_reentry_vectors bl __hyp_set_vectors __HVC(0) @ otherwise bounce to hyp mode b . @ should never be reached - - .align 2 -.L__hyp_reentry_vectors_offset: .long __hyp_reentry_vectors - . #else b __enter_kernel #endif @@ -1440,8 +1429,7 @@ ENTRY(efi_enter_kernel) mov r4, r0 @ preserve image base mov r8, r1 @ preserve DT pointer - ARM( adrl r0, call_cache_fn ) - THUMB( adr r0, call_cache_fn ) + adr_l r0, call_cache_fn adr r1, 0f @ clean the region of code we bl cache_clean_flush @ may run with the MMU off diff --git a/arch/arm/boot/compressed/string.c b/arch/arm/boot/compressed/string.c index ade5079bebbf..8c0fa276d994 100644 --- a/arch/arm/boot/compressed/string.c +++ b/arch/arm/boot/compressed/string.c @@ -7,6 +7,25 @@ #include <linux/string.h> +/* + * The decompressor is built without KASan but uses the same redirects as the + * rest of the kernel when CONFIG_KASAN is enabled, defining e.g. memcpy() + * to __memcpy() but since we are not linking with the main kernel string + * library in the decompressor, that will lead to link failures. + * + * Undefine KASan's versions, define the wrapped functions and alias them to + * the right names so that when e.g. __memcpy() appear in the code, it will + * still be linked to this local version of memcpy(). + */ +#ifdef CONFIG_KASAN +#undef memcpy +#undef memmove +#undef memset +void *__memcpy(void *__dest, __const void *__src, size_t __n) __alias(memcpy); +void *__memmove(void *__dest, __const void *__src, size_t count) __alias(memmove); +void *__memset(void *s, int c, size_t count) __alias(memset); +#endif + void *memcpy(void *__dest, __const void *__src, size_t __n) { int i = 0; diff --git a/arch/arm/include/asm/assembler.h b/arch/arm/include/asm/assembler.h index feac2c8b86f2..6ed30421f697 100644 --- a/arch/arm/include/asm/assembler.h +++ b/arch/arm/include/asm/assembler.h @@ -259,7 +259,7 @@ */ #define ALT_UP(instr...) \ .pushsection ".alt.smp.init", "a" ;\ - .long 9998b ;\ + .long 9998b - . ;\ 9997: instr ;\ .if . - 9997b == 2 ;\ nop ;\ @@ -270,7 +270,7 @@ .popsection #define ALT_UP_B(label) \ .pushsection ".alt.smp.init", "a" ;\ - .long 9998b ;\ + .long 9998b - . ;\ W(b) . + (label - 9998b) ;\ .popsection #else @@ -494,4 +494,88 @@ THUMB( orr \reg , \reg , #PSR_T_BIT ) #define _ASM_NOKPROBE(entry) #endif + .macro __adldst_l, op, reg, sym, tmp, c + .if __LINUX_ARM_ARCH__ < 7 + ldr\c \tmp, .La\@ + .subsection 1 + .align 2 +.La\@: .long \sym - .Lpc\@ + .previous + .else + .ifnb \c + THUMB( ittt \c ) + .endif + movw\c \tmp, #:lower16:\sym - .Lpc\@ + movt\c \tmp, #:upper16:\sym - .Lpc\@ + .endif + +#ifndef CONFIG_THUMB2_KERNEL + .set .Lpc\@, . + 8 // PC bias + .ifc \op, add + add\c \reg, \tmp, pc + .else + \op\c \reg, [pc, \tmp] + .endif +#else +.Lb\@: add\c \tmp, \tmp, pc + /* + * In Thumb-2 builds, the PC bias depends on whether we are currently + * emitting into a .arm or a .thumb section. The size of the add opcode + * above will be 2 bytes when emitting in Thumb mode and 4 bytes when + * emitting in ARM mode, so let's use this to account for the bias. + */ + .set .Lpc\@, . + (. - .Lb\@) + + .ifnc \op, add + \op\c \reg, [\tmp] + .endif +#endif + .endm + + /* + * mov_l - move a constant value or [relocated] address into a register + */ + .macro mov_l, dst:req, imm:req + .if __LINUX_ARM_ARCH__ < 7 + ldr \dst, =\imm + .else + movw \dst, #:lower16:\imm + movt \dst, #:upper16:\imm + .endif + .endm + + /* + * adr_l - adr pseudo-op with unlimited range + * + * @dst: destination register + * @sym: name of the symbol + * @cond: conditional opcode suffix + */ + .macro adr_l, dst:req, sym:req, cond + __adldst_l add, \dst, \sym, \dst, \cond + .endm + + /* + * ldr_l - ldr <literal> pseudo-op with unlimited range + * + * @dst: destination register + * @sym: name of the symbol + * @cond: conditional opcode suffix + */ + .macro ldr_l, dst:req, sym:req, cond + __adldst_l ldr, \dst, \sym, \dst, \cond + .endm + + /* + * str_l - str <literal> pseudo-op with unlimited range + * + * @src: source register + * @sym: name of the symbol + * @tmp: mandatory scratch register + * @cond: conditional opcode suffix + */ + .macro str_l, src:req, sym:req, tmp:req, cond + __adldst_l str, \src, \sym, \tmp, \cond + .endm + #endif /* __ASM_ASSEMBLER_H__ */ diff --git a/arch/arm/include/asm/div64.h b/arch/arm/include/asm/div64.h index 898e9c78a7e7..595e538f5bfb 100644 --- a/arch/arm/include/asm/div64.h +++ b/arch/arm/include/asm/div64.h @@ -21,29 +21,20 @@ * assembly implementation with completely non standard calling convention * for arguments and results (beware). */ - -#ifdef __ARMEB__ -#define __xh "r0" -#define __xl "r1" -#else -#define __xl "r0" -#define __xh "r1" -#endif - static inline uint32_t __div64_32(uint64_t *n, uint32_t base) { register unsigned int __base asm("r4") = base; register unsigned long long __n asm("r0") = *n; register unsigned long long __res asm("r2"); - register unsigned int __rem asm(__xh); - asm( __asmeq("%0", __xh) + unsigned int __rem; + asm( __asmeq("%0", "r0") __asmeq("%1", "r2") - __asmeq("%2", "r0") - __asmeq("%3", "r4") + __asmeq("%2", "r4") "bl __do_div64" - : "=r" (__rem), "=r" (__res) - : "r" (__n), "r" (__base) + : "+r" (__n), "=r" (__res) + : "r" (__base) : "ip", "lr", "cc"); + __rem = __n >> 32; *n = __res; return __rem; } diff --git a/arch/arm/include/asm/elf.h b/arch/arm/include/asm/elf.h index 61941f369861..b8102a6ddf16 100644 --- a/arch/arm/include/asm/elf.h +++ b/arch/arm/include/asm/elf.h @@ -51,6 +51,7 @@ typedef struct user_fp elf_fpregset_t; #define R_ARM_NONE 0 #define R_ARM_PC24 1 #define R_ARM_ABS32 2 +#define R_ARM_REL32 3 #define R_ARM_CALL 28 #define R_ARM_JUMP24 29 #define R_ARM_TARGET1 38 @@ -58,11 +59,15 @@ typedef struct user_fp elf_fpregset_t; #define R_ARM_PREL31 42 #define R_ARM_MOVW_ABS_NC 43 #define R_ARM_MOVT_ABS 44 +#define R_ARM_MOVW_PREL_NC 45 +#define R_ARM_MOVT_PREL 46 #define R_ARM_THM_CALL 10 #define R_ARM_THM_JUMP24 30 #define R_ARM_THM_MOVW_ABS_NC 47 #define R_ARM_THM_MOVT_ABS 48 +#define R_ARM_THM_MOVW_PREL_NC 49 +#define R_ARM_THM_MOVT_PREL 50 /* * These are used to set parameters in the core dumps. diff --git a/arch/arm/include/asm/fixmap.h b/arch/arm/include/asm/fixmap.h index c279a8a463a2..707068f852c2 100644 --- a/arch/arm/include/asm/fixmap.h +++ b/arch/arm/include/asm/fixmap.h @@ -2,7 +2,7 @@ #ifndef _ASM_FIXMAP_H #define _ASM_FIXMAP_H -#define FIXADDR_START 0xffc00000UL +#define FIXADDR_START 0xffc80000UL #define FIXADDR_END 0xfff00000UL #define FIXADDR_TOP (FIXADDR_END - PAGE_SIZE) diff --git a/arch/arm/include/asm/kasan.h b/arch/arm/include/asm/kasan.h new file mode 100644 index 000000000000..303c35df3135 --- /dev/null +++ b/arch/arm/include/asm/kasan.h @@ -0,0 +1,33 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * arch/arm/include/asm/kasan.h + * + * Copyright (c) 2015 Samsung Electronics Co., Ltd. + * Author: Andrey Ryabinin <ryabinin.a.a@gmail.com> + * + */ + +#ifndef __ASM_KASAN_H +#define __ASM_KASAN_H + +#ifdef CONFIG_KASAN + +#include <asm/kasan_def.h> + +#define KASAN_SHADOW_SCALE_SHIFT 3 + +/* + * The compiler uses a shadow offset assuming that addresses start + * from 0. Kernel addresses don't start from 0, so shadow + * for kernel really starts from 'compiler's shadow offset' + + * ('kernel address space start' >> KASAN_SHADOW_SCALE_SHIFT) + */ + +asmlinkage void kasan_early_init(void); +extern void kasan_init(void); + +#else +static inline void kasan_init(void) { } +#endif + +#endif diff --git a/arch/arm/include/asm/kasan_def.h b/arch/arm/include/asm/kasan_def.h new file mode 100644 index 000000000000..5739605aa7cf --- /dev/null +++ b/arch/arm/include/asm/kasan_def.h @@ -0,0 +1,81 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * arch/arm/include/asm/kasan_def.h + * + * Copyright (c) 2018 Huawei Technologies Co., Ltd. + * + * Author: Abbott Liu <liuwenliang@huawei.com> + */ + +#ifndef __ASM_KASAN_DEF_H +#define __ASM_KASAN_DEF_H + +#ifdef CONFIG_KASAN + +/* + * Define KASAN_SHADOW_OFFSET,KASAN_SHADOW_START and KASAN_SHADOW_END for + * the Arm kernel address sanitizer. We are "stealing" lowmem (the 4GB + * addressable by a 32bit architecture) out of the virtual address + * space to use as shadow memory for KASan as follows: + * + * +----+ 0xffffffff + * | | \ + * | | |-> Static kernel image (vmlinux) BSS and page table + * | |/ + * +----+ PAGE_OFFSET + * | | \ + * | | |-> Loadable kernel modules virtual address space area + * | |/ + * +----+ MODULES_VADDR = KASAN_SHADOW_END + * | | \ + * | | |-> The shadow area of kernel virtual address. + * | |/ + * +----+-> TASK_SIZE (start of kernel space) = KASAN_SHADOW_START the + * | |\ shadow address of MODULES_VADDR + * | | | + * | | | + * | | |-> The user space area in lowmem. The kernel address + * | | | sanitizer do not use this space, nor does it map it. + * | | | + * | | | + * | | | + * | | | + * | |/ + * ------ 0 + * + * 1) KASAN_SHADOW_START + * This value begins with the MODULE_VADDR's shadow address. It is the + * start of kernel virtual space. Since we have modules to load, we need + * to cover also that area with shadow memory so we can find memory + * bugs in modules. + * + * 2) KASAN_SHADOW_END + * This value is the 0x100000000's shadow address: the mapping that would + * be after the end of the kernel memory at 0xffffffff. It is the end of + * kernel address sanitizer shadow area. It is also the start of the + * module area. + * + * 3) KASAN_SHADOW_OFFSET: + * This value is used to map an address to the corresponding shadow + * address by the following formula: + * + * shadow_addr = (address >> 3) + KASAN_SHADOW_OFFSET; + * + * As you would expect, >> 3 is equal to dividing by 8, meaning each + * byte in the shadow memory covers 8 bytes of kernel memory, so one + * bit shadow memory per byte of kernel memory is used. + * + * The KASAN_SHADOW_OFFSET is provided in a Kconfig option depending + * on the VMSPLIT layout of the system: the kernel and userspace can + * split up lowmem in different ways according to needs, so we calculate + * the shadow offset depending on this. + */ + +#define KASAN_SHADOW_SCALE_SHIFT 3 +#define KASAN_SHADOW_OFFSET _AC(CONFIG_KASAN_SHADOW_OFFSET, UL) +#define KASAN_SHADOW_END ((UL(1) << (32 - KASAN_SHADOW_SCALE_SHIFT)) \ + + KASAN_SHADOW_OFFSET) +#define KASAN_SHADOW_START ((KASAN_SHADOW_END >> 3) + KASAN_SHADOW_OFFSET) + +#endif +#endif diff --git a/arch/arm/include/asm/memory.h b/arch/arm/include/asm/memory.h index 99035b5891ef..2f841cb65c30 100644 --- a/arch/arm/include/asm/memory.h +++ b/arch/arm/include/asm/memory.h @@ -18,6 +18,7 @@ #ifdef CONFIG_NEED_MACH_MEMORY_H #include <mach/memory.h> #endif +#include <asm/kasan_def.h> /* PAGE_OFFSET - the virtual address of the start of the kernel image */ #define PAGE_OFFSET UL(CONFIG_PAGE_OFFSET) @@ -28,7 +29,11 @@ * TASK_SIZE - the maximum size of a user space task. * TASK_UNMAPPED_BASE - the lower boundary of the mmap VM area */ +#ifndef CONFIG_KASAN #define TASK_SIZE (UL(CONFIG_PAGE_OFFSET) - UL(SZ_16M)) +#else +#define TASK_SIZE (KASAN_SHADOW_START) +#endif #define TASK_UNMAPPED_BASE ALIGN(TASK_SIZE / 3, SZ_16M) /* @@ -67,6 +72,10 @@ */ #define XIP_VIRT_ADDR(physaddr) (MODULES_VADDR + ((physaddr) & 0x000fffff)) +#define FDT_FIXED_BASE UL(0xff800000) +#define FDT_FIXED_SIZE (2 * SECTION_SIZE) +#define FDT_VIRT_BASE(physbase) ((void *)(FDT_FIXED_BASE | (physbase) % SECTION_SIZE)) + #if !defined(CONFIG_SMP) && !defined(CONFIG_ARM_LPAE) /* * Allow 16MB-aligned ioremap pages @@ -107,6 +116,7 @@ extern unsigned long vectors_base; #define MODULES_VADDR PAGE_OFFSET #define XIP_VIRT_ADDR(physaddr) (physaddr) +#define FDT_VIRT_BASE(physbase) ((void *)(physbase)) #endif /* !CONFIG_MMU */ @@ -173,6 +183,7 @@ extern unsigned long vectors_base; * so that all we need to do is modify the 8-bit constant field. */ #define __PV_BITS_31_24 0x81000000 +#define __PV_BITS_23_16 0x810000 #define __PV_BITS_7_0 0x81 extern unsigned long __pv_phys_pfn_offset; @@ -183,43 +194,65 @@ extern const void *__pv_table_begin, *__pv_table_end; #define PHYS_OFFSET ((phys_addr_t)__pv_phys_pfn_offset << PAGE_SHIFT) #define PHYS_PFN_OFFSET (__pv_phys_pfn_offset) -#define __pv_stub(from,to,instr,type) \ +#ifndef CONFIG_THUMB2_KERNEL +#define __pv_stub(from,to,instr) \ __asm__("@ __pv_stub\n" \ "1: " instr " %0, %1, %2\n" \ + "2: " instr " %0, %0, %3\n" \ " .pushsection .pv_table,\"a\"\n" \ - " .long 1b\n" \ + " .long 1b - ., 2b - .\n" \ " .popsection\n" \ : "=r" (to) \ - : "r" (from), "I" (type)) + : "r" (from), "I" (__PV_BITS_31_24), \ + "I"(__PV_BITS_23_16)) -#define __pv_stub_mov_hi(t) \ - __asm__ volatile("@ __pv_stub_mov\n" \ - "1: mov %R0, %1\n" \ +#define __pv_add_carry_stub(x, y) \ + __asm__("@ __pv_add_carry_stub\n" \ + "0: movw %R0, #0\n" \ + " adds %Q0, %1, %R0, lsl #20\n" \ + "1: mov %R0, %2\n" \ + " adc %R0, %R0, #0\n" \ " .pushsection .pv_table,\"a\"\n" \ - " .long 1b\n" \ + " .long 0b - ., 1b - .\n" \ " .popsection\n" \ - : "=r" (t) \ - : "I" (__PV_BITS_7_0)) + : "=&r" (y) \ + : "r" (x), "I" (__PV_BITS_7_0) \ + : "cc") + +#else +#define __pv_stub(from,to,instr) \ + __asm__("@ __pv_stub\n" \ + "0: movw %0, #0\n" \ + " lsl %0, #21\n" \ + " " instr " %0, %1, %0\n" \ + " .pushsection .pv_table,\"a\"\n" \ + " .long 0b - .\n" \ + " .popsection\n" \ + : "=&r" (to) \ + : "r" (from)) #define __pv_add_carry_stub(x, y) \ - __asm__ volatile("@ __pv_add_carry_stub\n" \ - "1: adds %Q0, %1, %2\n" \ + __asm__("@ __pv_add_carry_stub\n" \ + "0: movw %R0, #0\n" \ + " lsls %R0, #21\n" \ + " adds %Q0, %1, %R0\n" \ + "1: mvn %R0, #0\n" \ " adc %R0, %R0, #0\n" \ " .pushsection .pv_table,\"a\"\n" \ - " .long 1b\n" \ + " .long 0b - ., 1b - .\n" \ " .popsection\n" \ - : "+r" (y) \ - : "r" (x), "I" (__PV_BITS_31_24) \ + : "=&r" (y) \ + : "r" (x) \ : "cc") +#endif static inline phys_addr_t __virt_to_phys_nodebug(unsigned long x) { phys_addr_t t; if (sizeof(phys_addr_t) == 4) { - __pv_stub(x, t, "add", __PV_BITS_31_24); + __pv_stub(x, t, "add"); } else { - __pv_stub_mov_hi(t); __pv_add_carry_stub(x, t); } return t; @@ -235,7 +268,7 @@ static inline unsigned long __phys_to_virt(phys_addr_t x) * assembler expression receives 32 bit argument * in place where 'r' 32 bit operand is expected. */ - __pv_stub((unsigned long) x, t, "sub", __PV_BITS_31_24); + __pv_stub((unsigned long) x, t, "sub"); return t; } diff --git a/arch/arm/include/asm/pgalloc.h b/arch/arm/include/asm/pgalloc.h index 15f4674715f8..fdee1f04f4f3 100644 --- a/arch/arm/include/asm/pgalloc.h +++ b/arch/arm/include/asm/pgalloc.h @@ -21,6 +21,7 @@ #define _PAGE_KERNEL_TABLE (PMD_TYPE_TABLE | PMD_BIT4 | PMD_DOMAIN(DOMAIN_KERNEL)) #ifdef CONFIG_ARM_LPAE +#define PGD_SIZE (PTRS_PER_PGD * sizeof(pgd_t)) static inline void pud_populate(struct mm_struct *mm, pud_t *pud, pmd_t *pmd) { @@ -28,14 +29,19 @@ static inline void pud_populate(struct mm_struct *mm, pud_t *pud, pmd_t *pmd) } #else /* !CONFIG_ARM_LPAE */ +#define PGD_SIZE (PAGE_SIZE << 2) /* * Since we have only two-level page tables, these are trivial */ #define pmd_alloc_one(mm,addr) ({ BUG(); ((pmd_t *)2); }) #define pmd_free(mm, pmd) do { } while (0) +#ifdef CONFIG_KASAN +/* The KASan core unconditionally calls pud_populate() on all architectures */ +#define pud_populate(mm,pmd,pte) do { } while (0) +#else #define pud_populate(mm,pmd,pte) BUG() - +#endif #endif /* CONFIG_ARM_LPAE */ extern pgd_t *pgd_alloc(struct mm_struct *mm); diff --git a/arch/arm/include/asm/pgtable-2level.h b/arch/arm/include/asm/pgtable-2level.h index baf7d0204eb5..70fe69bdcce2 100644 --- a/arch/arm/include/asm/pgtable-2level.h +++ b/arch/arm/include/asm/pgtable-2level.h @@ -179,11 +179,28 @@ * the pud: the pud entry is never bad, always exists, and can't be set or * cleared. */ -#define pud_none(pud) (0) -#define pud_bad(pud) (0) -#define pud_present(pud) (1) -#define pud_clear(pudp) do { } while (0) -#define set_pud(pud,pudp) do { } while (0) +static inline int pud_none(pud_t pud) +{ + return 0; +} + +static inline int pud_bad(pud_t pud) +{ + return 0; +} + +static inline int pud_present(pud_t pud) +{ + return 1; +} + +static inline void pud_clear(pud_t *pudp) +{ +} + +static inline void set_pud(pud_t *pudp, pud_t pud) +{ +} static inline pmd_t *pmd_offset(pud_t *pud, unsigned long addr) { diff --git a/arch/arm/include/asm/processor.h b/arch/arm/include/asm/processor.h index b9241051e5cb..9e6b97286307 100644 --- a/arch/arm/include/asm/processor.h +++ b/arch/arm/include/asm/processor.h @@ -96,7 +96,7 @@ unsigned long get_wchan(struct task_struct *p); #define __ALT_SMP_ASM(smp, up) \ "9998: " smp "\n" \ " .pushsection \".alt.smp.init\", \"a\"\n" \ - " .long 9998b\n" \ + " .long 9998b - .\n" \ " " up "\n" \ " .popsection\n" #else diff --git a/arch/arm/include/asm/prom.h b/arch/arm/include/asm/prom.h index 1e36c40533c1..402e3f34c7ed 100644 --- a/arch/arm/include/asm/prom.h +++ b/arch/arm/include/asm/prom.h @@ -9,12 +9,12 @@ #ifdef CONFIG_OF -extern const struct machine_desc *setup_machine_fdt(unsigned int dt_phys); +extern const struct machine_desc *setup_machine_fdt(void *dt_virt); extern void __init arm_dt_init_cpu_maps(void); #else /* CONFIG_OF */ -static inline const struct machine_desc *setup_machine_fdt(unsigned int dt_phys) +static inline const struct machine_desc *setup_machine_fdt(void *dt_virt) { return NULL; } diff --git a/arch/arm/include/asm/string.h b/arch/arm/include/asm/string.h index 111a1d8a41dd..6c607c68f3ad 100644 --- a/arch/arm/include/asm/string.h +++ b/arch/arm/include/asm/string.h @@ -5,6 +5,9 @@ /* * We don't do inline string functions, since the * optimised inline asm versions are not small. + * + * The __underscore versions of some functions are for KASan to be able + * to replace them with instrumented versions. */ #define __HAVE_ARCH_STRRCHR @@ -15,15 +18,18 @@ extern char * strchr(const char * s, int c); #define __HAVE_ARCH_MEMCPY extern void * memcpy(void *, const void *, __kernel_size_t); +extern void *__memcpy(void *dest, const void *src, __kernel_size_t n); #define __HAVE_ARCH_MEMMOVE extern void * memmove(void *, const void *, __kernel_size_t); +extern void *__memmove(void *dest, const void *src, __kernel_size_t n); #define __HAVE_ARCH_MEMCHR extern void * memchr(const void *, int, __kernel_size_t); #define __HAVE_ARCH_MEMSET extern void * memset(void *, int, __kernel_size_t); +extern void *__memset(void *s, int c, __kernel_size_t n); #define __HAVE_ARCH_MEMSET32 extern void *__memset32(uint32_t *, uint32_t v, __kernel_size_t); @@ -39,4 +45,24 @@ static inline void *memset64(uint64_t *p, uint64_t v, __kernel_size_t n) return __memset64(p, v, n * 8, v >> 32); } +/* + * For files that are not instrumented (e.g. mm/slub.c) we + * must use non-instrumented versions of the mem* + * functions named __memcpy() etc. All such kernel code has + * been tagged with KASAN_SANITIZE_file.o = n, which means + * that the address sanitization argument isn't passed to the + * compiler, and __SANITIZE_ADDRESS__ is not set. As a result + * these defines kick in. + */ +#if defined(CONFIG_KASAN) && !defined(__SANITIZE_ADDRESS__) +#define memcpy(dst, src, len) __memcpy(dst, src, len) +#define memmove(dst, src, len) __memmove(dst, src, len) +#define memset(s, c, n) __memset(s, c, n) + +#ifndef __NO_FORTIFY +#define __NO_FORTIFY /* FORTIFY_SOURCE uses __builtin_memcpy, etc. */ +#endif + +#endif + #endif diff --git a/arch/arm/include/asm/thread_info.h b/arch/arm/include/asm/thread_info.h index eb7ce2747eb0..70d4cbc49ae1 100644 --- a/arch/arm/include/asm/thread_info.h +++ b/arch/arm/include/asm/thread_info.h @@ -13,7 +13,15 @@ #include <asm/fpstate.h> #include <asm/page.h> +#ifdef CONFIG_KASAN +/* + * KASan uses a lot of extra stack space so the thread size order needs to + * be increased. + */ +#define THREAD_SIZE_ORDER 2 +#else #define THREAD_SIZE_ORDER 1 +#endif #define THREAD_SIZE (PAGE_SIZE << THREAD_SIZE_ORDER) #define THREAD_START_SP (THREAD_SIZE - 8) diff --git a/arch/arm/include/asm/uaccess-asm.h b/arch/arm/include/asm/uaccess-asm.h index 907571fd05c6..e6eb7a2aaf1e 100644 --- a/arch/arm/include/asm/uaccess-asm.h +++ b/arch/arm/include/asm/uaccess-asm.h @@ -85,7 +85,7 @@ */ .macro uaccess_entry, tsk, tmp0, tmp1, tmp2, disable ldr \tmp1, [\tsk, #TI_ADDR_LIMIT] - mov \tmp2, #TASK_SIZE + ldr \tmp2, =TASK_SIZE str \tmp2, [\tsk, #TI_ADDR_LIMIT] DACR( mrc p15, 0, \tmp0, c3, c0, 0) DACR( str \tmp0, [sp, #SVC_DACR]) diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile index 09e67cb02b20..ae295a3bcfef 100644 --- a/arch/arm/kernel/Makefile +++ b/arch/arm/kernel/Makefile @@ -21,6 +21,9 @@ obj-y := elf.o entry-common.o irq.o opcodes.o \ setup.o signal.o sigreturn_codes.o \ stacktrace.o sys_arm.o time.o traps.o +KASAN_SANITIZE_stacktrace.o := n +KASAN_SANITIZE_traps.o := n + ifneq ($(CONFIG_ARM_UNWIND),y) obj-$(CONFIG_FRAME_POINTER) += return_address.o endif @@ -88,6 +91,7 @@ obj-$(CONFIG_PARAVIRT) += paravirt.o head-y := head$(MMUEXT).o obj-$(CONFIG_DEBUG_LL) += debug.o obj-$(CONFIG_EARLY_PRINTK) += early_printk.o +obj-$(CONFIG_ARM_PATCH_PHYS_VIRT) += phys2virt.o # This is executed very early using a temporary stack when no memory allocator # nor global data is available. Everything has to be allocated on the stack. diff --git a/arch/arm/kernel/atags.h b/arch/arm/kernel/atags.h index 067e12edc341..f2819c25b602 100644 --- a/arch/arm/kernel/atags.h +++ b/arch/arm/kernel/atags.h @@ -2,11 +2,11 @@ void convert_to_tag_list(struct tag *tags); #ifdef CONFIG_ATAGS -const struct machine_desc *setup_machine_tags(phys_addr_t __atags_pointer, +const struct machine_desc *setup_machine_tags(void *__atags_vaddr, unsigned int machine_nr); #else static inline const struct machine_desc * __init __noreturn -setup_machine_tags(phys_addr_t __atags_pointer, unsigned int machine_nr) +setup_machine_tags(void *__atags_vaddr, unsigned int machine_nr) { early_print("no ATAGS support: can't continue\n"); while (true); diff --git a/arch/arm/kernel/atags_parse.c b/arch/arm/kernel/atags_parse.c index 6c12d9fe694e..373b61f9a4f0 100644 --- a/arch/arm/kernel/atags_parse.c +++ b/arch/arm/kernel/atags_parse.c @@ -174,7 +174,7 @@ static void __init squash_mem_tags(struct tag *tag) } const struct machine_desc * __init -setup_machine_tags(phys_addr_t __atags_pointer, unsigned int machine_nr) +setup_machine_tags(void *atags_vaddr, unsigned int machine_nr) { struct tag *tags = (struct tag *)&default_tags; const struct machine_desc *mdesc = NULL, *p; @@ -195,8 +195,8 @@ setup_machine_tags(phys_addr_t __atags_pointer, unsigned int machine_nr) if (!mdesc) return NULL; - if (__atags_pointer) - tags = phys_to_virt(__atags_pointer); + if (atags_vaddr) + tags = atags_vaddr; else if (mdesc->atag_offset) tags = (void *)(PAGE_OFFSET + mdesc->atag_offset); diff --git a/arch/arm/kernel/devtree.c b/arch/arm/kernel/devtree.c index 7f0745a97e20..28311dd0fee6 100644 --- a/arch/arm/kernel/devtree.c +++ b/arch/arm/kernel/devtree.c @@ -203,12 +203,12 @@ static const void * __init arch_get_next_mach(const char *const **match) /** * setup_machine_fdt - Machine setup when an dtb was passed to the kernel - * @dt_phys: physical address of dt blob + * @dt_virt: virtual address of dt blob * * If a dtb was passed to the kernel in r2, then use it to choose the * correct machine_desc and to setup the system. */ -const struct machine_desc * __init setup_machine_fdt(unsigned int dt_phys) +const struct machine_desc * __init setup_machine_fdt(void *dt_virt) { const struct machine_desc *mdesc, *mdesc_best = NULL; @@ -221,7 +221,7 @@ const struct machine_desc * __init setup_machine_fdt(unsigned int dt_phys) mdesc_best = &__mach_desc_GENERIC_DT; #endif - if (!dt_phys || !early_init_dt_verify(phys_to_virt(dt_phys))) + if (!dt_virt || !early_init_dt_verify(dt_virt)) return NULL; mdesc = of_flat_dt_match_machine(mdesc_best, arch_get_next_mach); diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S index 55a47df04773..0ea8529a4872 100644 --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S @@ -252,31 +252,10 @@ __und_svc: #else svc_entry #endif - @ - @ call emulation code, which returns using r9 if it has emulated - @ the instruction, or the more conventional lr if we are to treat - @ this as a real undefined instruction - @ - @ r0 - instruction - @ -#ifndef CONFIG_THUMB2_KERNEL - ldr r0, [r4, #-4] -#else - mov r1, #2 - ldrh r0, [r4, #-2] @ Thumb instruction at LR - 2 - cmp r0, #0xe800 @ 32-bit instruction if xx >= 0 - blo __und_svc_fault - ldrh r9, [r4] @ bottom 16 bits - add r4, r4, #2 - str r4, [sp, #S_PC] - orr r0, r9, r0, lsl #16 -#endif - badr r9, __und_svc_finish - mov r2, r4 - bl call_fpe mov r1, #4 @ PC correction to apply -__und_svc_fault: + THUMB( tst r5, #PSR_T_BIT ) @ exception taken in Thumb mode? + THUMB( movne r1, #2 ) @ if so, fix up PC correction mov r0, sp @ struct pt_regs *regs bl __und_fault @@ -427,7 +406,8 @@ ENDPROC(__fiq_abt) @ if it was interrupted in a critical region. Here we @ perform a quick test inline since it should be false @ 99.9999% of the time. The rest is done out of line. - cmp r4, #TASK_SIZE + ldr r0, =TASK_SIZE + cmp r4, r0 blhs kuser_cmpxchg64_fixup #endif #endif diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S index 77d16390a524..e0d7833a1827 100644 --- a/arch/arm/kernel/entry-common.S +++ b/arch/arm/kernel/entry-common.S @@ -50,7 +50,8 @@ __ret_fast_syscall: UNWIND(.cantunwind ) disable_irq_notrace @ disable interrupts ldr r2, [tsk, #TI_ADDR_LIMIT] - cmp r2, #TASK_SIZE + ldr r1, =TASK_SIZE + cmp r2, r1 blne addr_limit_check_failed ldr r1, [tsk, #TI_FLAGS] @ re-check for syscall tracing movs r1, r1, lsl #16 @@ -87,7 +88,8 @@ __ret_fast_syscall: #endif disable_irq_notrace @ disable interrupts ldr r2, [tsk, #TI_ADDR_LIMIT] - cmp r2, #TASK_SIZE + ldr r1, =TASK_SIZE + cmp r2, r1 blne addr_limit_check_failed ldr r1, [tsk, #TI_FLAGS] @ re-check for syscall tracing movs r1, r1, lsl #16 @@ -128,7 +130,8 @@ ret_slow_syscall: disable_irq_notrace @ disable interrupts ENTRY(ret_to_user_from_irq) ldr r2, [tsk, #TI_ADDR_LIMIT] - cmp r2, #TASK_SIZE + ldr r1, =TASK_SIZE + cmp r2, r1 blne addr_limit_check_failed ldr r1, [tsk, #TI_FLAGS] movs r1, r1, lsl #16 diff --git a/arch/arm/kernel/head-common.S b/arch/arm/kernel/head-common.S index 4a3982812a40..29b2eda136bb 100644 --- a/arch/arm/kernel/head-common.S +++ b/arch/arm/kernel/head-common.S @@ -95,7 +95,7 @@ __mmap_switched: THUMB( ldmia r4!, {r0, r1, r2, r3} ) THUMB( mov sp, r3 ) sub r2, r2, r1 - bl memcpy @ copy .data to RAM + bl __memcpy @ copy .data to RAM #endif ARM( ldmia r4!, {r0, r1, sp} ) @@ -103,7 +103,7 @@ __mmap_switched: THUMB( mov sp, r3 ) sub r2, r1, r0 mov r1, #0 - bl memset @ clear .bss + bl __memset @ clear .bss ldmia r4, {r0, r1, r2, r3} str r9, [r0] @ Save processor ID @@ -111,6 +111,9 @@ __mmap_switched: str r8, [r2] @ Save atags pointer cmp r3, #0 strne r10, [r3] @ Save control register values +#ifdef CONFIG_KASAN + bl kasan_early_init +#endif mov lr, #0 b start_kernel ENDPROC(__mmap_switched) @@ -170,11 +173,12 @@ ENDPROC(lookup_processor_type) * r9 = cpuid (preserved) */ __lookup_processor_type: - adr r3, __lookup_processor_type_data - ldmia r3, {r4 - r6} - sub r3, r3, r4 @ get offset between virt&phys - add r5, r5, r3 @ convert virt addresses to - add r6, r6, r3 @ physical address space + /* + * Look in <asm/procinfo.h> for information about the __proc_info + * structure. + */ + adr_l r5, __proc_info_begin + adr_l r6, __proc_info_end 1: ldmia r5, {r3, r4} @ value, mask and r4, r4, r9 @ mask wanted bits teq r3, r4 @@ -186,17 +190,6 @@ __lookup_processor_type: 2: ret lr ENDPROC(__lookup_processor_type) -/* - * Look in <asm/procinfo.h> for information about the __proc_info structure. - */ - .align 2 - .type __lookup_processor_type_data, %object -__lookup_processor_type_data: - .long . - .long __proc_info_begin - .long __proc_info_end - .size __lookup_processor_type_data, . - __lookup_processor_type_data - __error_lpae: #ifdef CONFIG_DEBUG_LL adr r0, str_lpae diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S index f8904227e7fd..7f62c5eccdf3 100644 --- a/arch/arm/kernel/head.S +++ b/arch/arm/kernel/head.S @@ -103,10 +103,8 @@ ENTRY(stext) #endif #ifndef CONFIG_XIP_KERNEL - adr r3, 2f - ldmia r3, {r4, r8} - sub r4, r3, r4 @ (PHYS_OFFSET - PAGE_OFFSET) - add r8, r8, r4 @ PHYS_OFFSET + adr_l r8, _text @ __pa(_text) + sub r8, r8, #TEXT_OFFSET @ PHYS_OFFSET #else ldr r8, =PLAT_PHYS_OFFSET @ always constant in this case #endif @@ -158,10 +156,6 @@ ENTRY(stext) 1: b __enable_mmu ENDPROC(stext) .ltorg -#ifndef CONFIG_XIP_KERNEL -2: .long . - .long PAGE_OFFSET -#endif /* * Setup the initial page tables. We only setup the barest @@ -224,11 +218,8 @@ __create_page_tables: * Create identity mapping to cater for __enable_mmu. * This identity mapping will be removed by paging_init(). */ - adr r0, __turn_mmu_on_loc - ldmia r0, {r3, r5, r6} - sub r0, r0, r3 @ virt->phys offset - add r5, r5, r0 @ phys __turn_mmu_on - add r6, r6, r0 @ phys __turn_mmu_on_end + adr_l r5, __turn_mmu_on @ _pa(__turn_mmu_on) + adr_l r6, __turn_mmu_on_end @ _pa(__turn_mmu_on_end) mov r5, r5, lsr #SECTION_SHIFT mov r6, r6, lsr #SECTION_SHIFT @@ -274,11 +265,10 @@ __create_page_tables: * We map 2 sections in case the ATAGs/DTB crosses a section boundary. */ mov r0, r2, lsr #SECTION_SHIFT - movs r0, r0, lsl #SECTION_SHIFT - subne r3, r0, r8 - addne r3, r3, #PAGE_OFFSET - addne r3, r4, r3, lsr #(SECTION_SHIFT - PMD_ORDER) - orrne r6, r7, r0 + cmp r2, #0 + ldrne r3, =FDT_FIXED_BASE >> (SECTION_SHIFT - PMD_ORDER) + addne r3, r3, r4 + orrne r6, r7, r0, lsl #SECTION_SHIFT strne r6, [r3], #1 << PMD_ORDER addne r6, r6, #1 << SECTION_SHIFT strne r6, [r3] @@ -351,11 +341,6 @@ __create_page_tables: ret lr ENDPROC(__create_page_tables) .ltorg - .align -__turn_mmu_on_loc: - .long . - .long __turn_mmu_on - .long __turn_mmu_on_end #if defined(CONFIG_SMP) .text @@ -391,10 +376,8 @@ ENTRY(secondary_startup) /* * Use the page tables supplied from __cpu_up. */ - adr r4, __secondary_data - ldmia r4, {r5, r7, r12} @ address to jump to after - sub lr, r4, r5 @ mmu has been enabled - add r3, r7, lr + adr_l r3, secondary_data + mov_l r12, __secondary_switched ldrd r4, r5, [r3, #0] @ get secondary_data.pgdir ARM_BE8(eor r4, r4, r5) @ Swap r5 and r4 in BE: ARM_BE8(eor r5, r4, r5) @ it can be done in 3 steps @@ -409,22 +392,13 @@ ARM_BE8(eor r4, r4, r5) @ without using a temp reg. ENDPROC(secondary_startup) ENDPROC(secondary_startup_arm) - /* - * r6 = &secondary_data - */ ENTRY(__secondary_switched) - ldr sp, [r7, #12] @ get secondary_data.stack + ldr_l r7, secondary_data + 12 @ get secondary_data.stack + mov sp, r7 mov fp, #0 b secondary_start_kernel ENDPROC(__secondary_switched) - .align - - .type __secondary_data, %object -__secondary_data: - .long . - .long secondary_data - .long __secondary_switched #endif /* defined(CONFIG_SMP) */ @@ -539,19 +513,11 @@ ARM_BE8(rev r0, r0) @ byteswap if big endian retne lr __fixup_smp_on_up: - adr r0, 1f - ldmia r0, {r3 - r5} - sub r3, r0, r3 - add r4, r4, r3 - add r5, r5, r3 + adr_l r4, __smpalt_begin + adr_l r5, __smpalt_end b __do_fixup_smp_on_up ENDPROC(__fixup_smp) - .align -1: .word . - .word __smpalt_begin - .word __smpalt_end - .pushsection .data .align 2 .globl smp_on_up @@ -565,14 +531,15 @@ smp_on_up: __do_fixup_smp_on_up: cmp r4, r5 reths lr - ldmia r4!, {r0, r6} - ARM( str r6, [r0, r3] ) - THUMB( add r0, r0, r3 ) + ldmia r4, {r0, r6} + ARM( str r6, [r0, r4] ) + THUMB( add r0, r0, r4 ) + add r4, r4, #8 #ifdef __ARMEB__ THUMB( mov r6, r6, ror #16 ) @ Convert word order for big-endian. #endif THUMB( strh r6, [r0], #2 ) @ For Thumb-2, store as two halfwords - THUMB( mov r6, r6, lsr #16 ) @ to be robust against misaligned r3. + THUMB( mov r6, r6, lsr #16 ) @ to be robust against misaligned r0. THUMB( strh r6, [r0] ) b __do_fixup_smp_on_up ENDPROC(__do_fixup_smp_on_up) @@ -581,151 +548,8 @@ ENTRY(fixup_smp) stmfd sp!, {r4 - r6, lr} mov r4, r0 add r5, r0, r1 - mov r3, #0 bl __do_fixup_smp_on_up ldmfd sp!, {r4 - r6, pc} ENDPROC(fixup_smp) -#ifdef __ARMEB__ -#define LOW_OFFSET 0x4 -#define HIGH_OFFSET 0x0 -#else -#define LOW_OFFSET 0x0 -#define HIGH_OFFSET 0x4 -#endif - -#ifdef CONFIG_ARM_PATCH_PHYS_VIRT - -/* __fixup_pv_table - patch the stub instructions with the delta between - * PHYS_OFFSET and PAGE_OFFSET, which is assumed to be 16MiB aligned and - * can be expressed by an immediate shifter operand. The stub instruction - * has a form of '(add|sub) rd, rn, #imm'. - */ - __HEAD -__fixup_pv_table: - adr r0, 1f - ldmia r0, {r3-r7} - mvn ip, #0 - subs r3, r0, r3 @ PHYS_OFFSET - PAGE_OFFSET - add r4, r4, r3 @ adjust table start address - add r5, r5, r3 @ adjust table end address - add r6, r6, r3 @ adjust __pv_phys_pfn_offset address - add r7, r7, r3 @ adjust __pv_offset address - mov r0, r8, lsr #PAGE_SHIFT @ convert to PFN - str r0, [r6] @ save computed PHYS_OFFSET to __pv_phys_pfn_offset - strcc ip, [r7, #HIGH_OFFSET] @ save to __pv_offset high bits - mov r6, r3, lsr #24 @ constant for add/sub instructions - teq r3, r6, lsl #24 @ must be 16MiB aligned -THUMB( it ne @ cross section branch ) - bne __error - str r3, [r7, #LOW_OFFSET] @ save to __pv_offset low bits - b __fixup_a_pv_table -ENDPROC(__fixup_pv_table) - - .align -1: .long . - .long __pv_table_begin - .long __pv_table_end -2: .long __pv_phys_pfn_offset - .long __pv_offset - - .text -__fixup_a_pv_table: - adr r0, 3f - ldr r6, [r0] - add r6, r6, r3 - ldr r0, [r6, #HIGH_OFFSET] @ pv_offset high word - ldr r6, [r6, #LOW_OFFSET] @ pv_offset low word - mov r6, r6, lsr #24 - cmn r0, #1 -#ifdef CONFIG_THUMB2_KERNEL - moveq r0, #0x200000 @ set bit 21, mov to mvn instruction - lsls r6, #24 - beq 2f - clz r7, r6 - lsr r6, #24 - lsl r6, r7 - bic r6, #0x0080 - lsrs r7, #1 - orrcs r6, #0x0080 - orr r6, r6, r7, lsl #12 - orr r6, #0x4000 - b 2f -1: add r7, r3 - ldrh ip, [r7, #2] -ARM_BE8(rev16 ip, ip) - tst ip, #0x4000 - and ip, #0x8f00 - orrne ip, r6 @ mask in offset bits 31-24 - orreq ip, r0 @ mask in offset bits 7-0 -ARM_BE8(rev16 ip, ip) - strh ip, [r7, #2] - bne 2f - ldrh ip, [r7] -ARM_BE8(rev16 ip, ip) - bic ip, #0x20 - orr ip, ip, r0, lsr #16 -ARM_BE8(rev16 ip, ip) - strh ip, [r7] -2: cmp r4, r5 - ldrcc r7, [r4], #4 @ use branch for delay slot - bcc 1b - bx lr -#else -#ifdef CONFIG_CPU_ENDIAN_BE8 - moveq r0, #0x00004000 @ set bit 22, mov to mvn instruction -#else - moveq r0, #0x400000 @ set bit 22, mov to mvn instruction -#endif - b 2f -1: ldr ip, [r7, r3] -#ifdef CONFIG_CPU_ENDIAN_BE8 - @ in BE8, we load data in BE, but instructions still in LE - bic ip, ip, #0xff000000 - tst ip, #0x000f0000 @ check the rotation field - orrne ip, ip, r6, lsl #24 @ mask in offset bits 31-24 - biceq ip, ip, #0x00004000 @ clear bit 22 - orreq ip, ip, r0 @ mask in offset bits 7-0 -#else - bic ip, ip, #0x000000ff - tst ip, #0xf00 @ check the rotation field - orrne ip, ip, r6 @ mask in offset bits 31-24 - biceq ip, ip, #0x400000 @ clear bit 22 - orreq ip, ip, r0 @ mask in offset bits 7-0 -#endif - str ip, [r7, r3] -2: cmp r4, r5 - ldrcc r7, [r4], #4 @ use branch for delay slot - bcc 1b - ret lr -#endif -ENDPROC(__fixup_a_pv_table) - - .align -3: .long __pv_offset - -ENTRY(fixup_pv_table) - stmfd sp!, {r4 - r7, lr} - mov r3, #0 @ no offset - mov r4, r0 @ r0 = table start - add r5, r0, r1 @ r1 = table size - bl __fixup_a_pv_table - ldmfd sp!, {r4 - r7, pc} -ENDPROC(fixup_pv_table) - - .data - .align 2 - .globl __pv_phys_pfn_offset - .type __pv_phys_pfn_offset, %object -__pv_phys_pfn_offset: - .word 0 - .size __pv_phys_pfn_offset, . -__pv_phys_pfn_offset - - .globl __pv_offset - .type __pv_offset, %object -__pv_offset: - .quad 0 - .size __pv_offset, . -__pv_offset -#endif - #include "head-common.S" diff --git a/arch/arm/kernel/hyp-stub.S b/arch/arm/kernel/hyp-stub.S index 26d8e03b1dd3..b699b22a4db1 100644 --- a/arch/arm/kernel/hyp-stub.S +++ b/arch/arm/kernel/hyp-stub.S @@ -24,41 +24,38 @@ ENTRY(__boot_cpu_mode) .text /* - * Save the primary CPU boot mode. Requires 3 scratch registers. + * Save the primary CPU boot mode. Requires 2 scratch registers. */ - .macro store_primary_cpu_mode reg1, reg2, reg3 + .macro store_primary_cpu_mode reg1, reg2 mrs \reg1, cpsr and \reg1, \reg1, #MODE_MASK - adr \reg2, .L__boot_cpu_mode_offset - ldr \reg3, [\reg2] - str \reg1, [\reg2, \reg3] + str_l \reg1, __boot_cpu_mode, \reg2 .endm /* * Compare the current mode with the one saved on the primary CPU. * If they don't match, record that fact. The Z bit indicates * if there's a match or not. - * Requires 3 additionnal scratch registers. + * Requires 2 additional scratch registers. */ - .macro compare_cpu_mode_with_primary mode, reg1, reg2, reg3 - adr \reg2, .L__boot_cpu_mode_offset - ldr \reg3, [\reg2] - ldr \reg1, [\reg2, \reg3] + .macro compare_cpu_mode_with_primary mode, reg1, reg2 + adr_l \reg2, __boot_cpu_mode + ldr \reg1, [\reg2] cmp \mode, \reg1 @ matches primary CPU boot mode? orrne \reg1, \reg1, #BOOT_CPU_MODE_MISMATCH - strne \reg1, [\reg2, \reg3] @ record what happened and give up + strne \reg1, [\reg2] @ record what happened and give up .endm #else /* ZIMAGE */ - .macro store_primary_cpu_mode reg1:req, reg2:req, reg3:req + .macro store_primary_cpu_mode reg1:req, reg2:req .endm /* * The zImage loader only runs on one CPU, so we don't bother with mult-CPU * consistency checking: */ - .macro compare_cpu_mode_with_primary mode, reg1, reg2, reg3 + .macro compare_cpu_mode_with_primary mode, reg1, reg2 cmp \mode, \mode .endm @@ -73,7 +70,7 @@ ENTRY(__boot_cpu_mode) */ @ Call this from the primary CPU ENTRY(__hyp_stub_install) - store_primary_cpu_mode r4, r5, r6 + store_primary_cpu_mode r4, r5 ENDPROC(__hyp_stub_install) @ fall through... @@ -87,7 +84,7 @@ ENTRY(__hyp_stub_install_secondary) * If the secondary has booted with a different mode, give up * immediately. */ - compare_cpu_mode_with_primary r4, r5, r6, r7 + compare_cpu_mode_with_primary r4, r5, r6 retne lr /* @@ -228,12 +225,6 @@ ENTRY(__hyp_soft_restart) ret lr ENDPROC(__hyp_soft_restart) -#ifndef ZIMAGE -.align 2 -.L__boot_cpu_mode_offset: - .long __boot_cpu_mode - . -#endif - .align 5 ENTRY(__hyp_stub_vectors) __hyp_stub_reset: W(b) . diff --git a/arch/arm/kernel/iwmmxt.S b/arch/arm/kernel/iwmmxt.S index 0dcae787b004..d2b4ac06e4ed 100644 --- a/arch/arm/kernel/iwmmxt.S +++ b/arch/arm/kernel/iwmmxt.S @@ -16,6 +16,7 @@ #include <asm/thread_info.h> #include <asm/asm-offsets.h> #include <asm/assembler.h> +#include "iwmmxt.h" #if defined(CONFIG_CPU_PJ4) || defined(CONFIG_CPU_PJ4B) #define PJ4(code...) code @@ -113,33 +114,33 @@ concan_save: concan_dump: - wstrw wCSSF, [r1, #MMX_WCSSF] - wstrw wCASF, [r1, #MMX_WCASF] - wstrw wCGR0, [r1, #MMX_WCGR0] - wstrw wCGR1, [r1, #MMX_WCGR1] - wstrw wCGR2, [r1, #MMX_WCGR2] - wstrw wCGR3, [r1, #MMX_WCGR3] + wstrw wCSSF, r1, MMX_WCSSF + wstrw wCASF, r1, MMX_WCASF + wstrw wCGR0, r1, MMX_WCGR0 + wstrw wCGR1, r1, MMX_WCGR1 + wstrw wCGR2, r1, MMX_WCGR2 + wstrw wCGR3, r1, MMX_WCGR3 1: @ MUP? wRn tst r2, #0x2 beq 2f - wstrd wR0, [r1, #MMX_WR0] - wstrd wR1, [r1, #MMX_WR1] - wstrd wR2, [r1, #MMX_WR2] - wstrd wR3, [r1, #MMX_WR3] - wstrd wR4, [r1, #MMX_WR4] - wstrd wR5, [r1, #MMX_WR5] - wstrd wR6, [r1, #MMX_WR6] - wstrd wR7, [r1, #MMX_WR7] - wstrd wR8, [r1, #MMX_WR8] - wstrd wR9, [r1, #MMX_WR9] - wstrd wR10, [r1, #MMX_WR10] - wstrd wR11, [r1, #MMX_WR11] - wstrd wR12, [r1, #MMX_WR12] - wstrd wR13, [r1, #MMX_WR13] - wstrd wR14, [r1, #MMX_WR14] - wstrd wR15, [r1, #MMX_WR15] + wstrd wR0, r1, MMX_WR0 + wstrd wR1, r1, MMX_WR1 + wstrd wR2, r1, MMX_WR2 + wstrd wR3, r1, MMX_WR3 + wstrd wR4, r1, MMX_WR4 + wstrd wR5, r1, MMX_WR5 + wstrd wR6, r1, MMX_WR6 + wstrd wR7, r1, MMX_WR7 + wstrd wR8, r1, MMX_WR8 + wstrd wR9, r1, MMX_WR9 + wstrd wR10, r1, MMX_WR10 + wstrd wR11, r1, MMX_WR11 + wstrd wR12, r1, MMX_WR12 + wstrd wR13, r1, MMX_WR13 + wstrd wR14, r1, MMX_WR14 + wstrd wR15, r1, MMX_WR15 2: teq r0, #0 @ anything to load? reteq lr @ if not, return @@ -147,30 +148,30 @@ concan_dump: concan_load: @ Load wRn - wldrd wR0, [r0, #MMX_WR0] - wldrd wR1, [r0, #MMX_WR1] - wldrd wR2, [r0, #MMX_WR2] - wldrd wR3, [r0, #MMX_WR3] - wldrd wR4, [r0, #MMX_WR4] - wldrd wR5, [r0, #MMX_WR5] - wldrd wR6, [r0, #MMX_WR6] - wldrd wR7, [r0, #MMX_WR7] - wldrd wR8, [r0, #MMX_WR8] - wldrd wR9, [r0, #MMX_WR9] - wldrd wR10, [r0, #MMX_WR10] - wldrd wR11, [r0, #MMX_WR11] - wldrd wR12, [r0, #MMX_WR12] - wldrd wR13, [r0, #MMX_WR13] - wldrd wR14, [r0, #MMX_WR14] - wldrd wR15, [r0, #MMX_WR15] + wldrd wR0, r0, MMX_WR0 + wldrd wR1, r0, MMX_WR1 + wldrd wR2, r0, MMX_WR2 + wldrd wR3, r0, MMX_WR3 + wldrd wR4, r0, MMX_WR4 + wldrd wR5, r0, MMX_WR5 + wldrd wR6, r0, MMX_WR6 + wldrd wR7, r0, MMX_WR7 + wldrd wR8, r0, MMX_WR8 + wldrd wR9, r0, MMX_WR9 + wldrd wR10, r0, MMX_WR10 + wldrd wR11, r0, MMX_WR11 + wldrd wR12, r0, MMX_WR12 + wldrd wR13, r0, MMX_WR13 + wldrd wR14, r0, MMX_WR14 + wldrd wR15, r0, MMX_WR15 @ Load wCx - wldrw wCSSF, [r0, #MMX_WCSSF] - wldrw wCASF, [r0, #MMX_WCASF] - wldrw wCGR0, [r0, #MMX_WCGR0] - wldrw wCGR1, [r0, #MMX_WCGR1] - wldrw wCGR2, [r0, #MMX_WCGR2] - wldrw wCGR3, [r0, #MMX_WCGR3] + wldrw wCSSF, r0, MMX_WCSSF + wldrw wCASF, r0, MMX_WCASF + wldrw wCGR0, r0, MMX_WCGR0 + wldrw wCGR1, r0, MMX_WCGR1 + wldrw wCGR2, r0, MMX_WCGR2 + wldrw wCGR3, r0, MMX_WCGR3 @ clear CUP/MUP (only if r1 != 0) teq r1, #0 diff --git a/arch/arm/kernel/iwmmxt.h b/arch/arm/kernel/iwmmxt.h new file mode 100644 index 000000000000..fb627286f5bb --- /dev/null +++ b/arch/arm/kernel/iwmmxt.h @@ -0,0 +1,47 @@ +/* SPDX-License-Identifier: GPL-2.0 */ + +#ifndef __IWMMXT_H__ +#define __IWMMXT_H__ + +.irp b, 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15 +.set .LwR\b, \b +.set .Lr\b, \b +.endr + +.set .LwCSSF, 0x2 +.set .LwCASF, 0x3 +.set .LwCGR0, 0x8 +.set .LwCGR1, 0x9 +.set .LwCGR2, 0xa +.set .LwCGR3, 0xb + +.macro wldrd, reg:req, base:req, offset:req +.inst 0xedd00100 | (.L\reg << 12) | (.L\base << 16) | (\offset >> 2) +.endm + +.macro wldrw, reg:req, base:req, offset:req +.inst 0xfd900100 | (.L\reg << 12) | (.L\base << 16) | (\offset >> 2) +.endm + +.macro wstrd, reg:req, base:req, offset:req +.inst 0xedc00100 | (.L\reg << 12) | (.L\base << 16) | (\offset >> 2) +.endm + +.macro wstrw, reg:req, base:req, offset:req +.inst 0xfd800100 | (.L\reg << 12) | (.L\base << 16) | (\offset >> 2) +.endm + +#ifdef __clang__ + +#define wCon c1 + +.macro tmrc, dest:req, control:req +mrc p1, 0, \dest, \control, c0, 0 +.endm + +.macro tmcr, control:req, src:req +mcr p1, 0, \src, \control, c0, 0 +.endm +#endif + +#endif diff --git a/arch/arm/kernel/module.c b/arch/arm/kernel/module.c index e15444b25ca0..beac45e89ba6 100644 --- a/arch/arm/kernel/module.c +++ b/arch/arm/kernel/module.c @@ -185,14 +185,24 @@ apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex, *(u32 *)loc |= offset & 0x7fffffff; break; + case R_ARM_REL32: + *(u32 *)loc += sym->st_value - loc; + break; + case R_ARM_MOVW_ABS_NC: case R_ARM_MOVT_ABS: + case R_ARM_MOVW_PREL_NC: + case R_ARM_MOVT_PREL: offset = tmp = __mem_to_opcode_arm(*(u32 *)loc); offset = ((offset & 0xf0000) >> 4) | (offset & 0xfff); offset = (offset ^ 0x8000) - 0x8000; offset += sym->st_value; - if (ELF32_R_TYPE(rel->r_info) == R_ARM_MOVT_ABS) + if (ELF32_R_TYPE(rel->r_info) == R_ARM_MOVT_PREL || + ELF32_R_TYPE(rel->r_info) == R_ARM_MOVW_PREL_NC) + offset -= loc; + if (ELF32_R_TYPE(rel->r_info) == R_ARM_MOVT_ABS || + ELF32_R_TYPE(rel->r_info) == R_ARM_MOVT_PREL) offset >>= 16; tmp &= 0xfff0f000; @@ -283,6 +293,8 @@ apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex, case R_ARM_THM_MOVW_ABS_NC: case R_ARM_THM_MOVT_ABS: + case R_ARM_THM_MOVW_PREL_NC: + case R_ARM_THM_MOVT_PREL: upper = __mem_to_opcode_thumb16(*(u16 *)loc); lower = __mem_to_opcode_thumb16(*(u16 *)(loc + 2)); @@ -302,7 +314,11 @@ apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex, offset = (offset ^ 0x8000) - 0x8000; offset += sym->st_value; - if (ELF32_R_TYPE(rel->r_info) == R_ARM_THM_MOVT_ABS) + if (ELF32_R_TYPE(rel->r_info) == R_ARM_THM_MOVT_PREL || + ELF32_R_TYPE(rel->r_info) == R_ARM_THM_MOVW_PREL_NC) + offset -= loc; + if (ELF32_R_TYPE(rel->r_info) == R_ARM_THM_MOVT_ABS || + ELF32_R_TYPE(rel->r_info) == R_ARM_THM_MOVT_PREL) offset >>= 16; upper = (u16)((upper & 0xfbf0) | diff --git a/arch/arm/kernel/phys2virt.S b/arch/arm/kernel/phys2virt.S new file mode 100644 index 000000000000..fb53db78fe78 --- /dev/null +++ b/arch/arm/kernel/phys2virt.S @@ -0,0 +1,238 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (C) 1994-2002 Russell King + * Copyright (c) 2003, 2020 ARM Limited + * All Rights Reserved + */ + +#include <linux/init.h> +#include <linux/linkage.h> +#include <asm/assembler.h> +#include <asm/page.h> + +#ifdef __ARMEB__ +#define LOW_OFFSET 0x4 +#define HIGH_OFFSET 0x0 +#else +#define LOW_OFFSET 0x0 +#define HIGH_OFFSET 0x4 +#endif + +/* + * __fixup_pv_table - patch the stub instructions with the delta between + * PHYS_OFFSET and PAGE_OFFSET, which is assumed to be + * 2 MiB aligned. + * + * Called from head.S, which expects the following registers to be preserved: + * r1 = machine no, r2 = atags or dtb, + * r8 = phys_offset, r9 = cpuid, r10 = procinfo + */ + __HEAD +ENTRY(__fixup_pv_table) + mov r0, r8, lsr #PAGE_SHIFT @ convert to PFN + str_l r0, __pv_phys_pfn_offset, r3 + + adr_l r0, __pv_offset + subs r3, r8, #PAGE_OFFSET @ PHYS_OFFSET - PAGE_OFFSET + mvn ip, #0 + strcc ip, [r0, #HIGH_OFFSET] @ save to __pv_offset high bits + str r3, [r0, #LOW_OFFSET] @ save to __pv_offset low bits + + mov r0, r3, lsr #21 @ constant for add/sub instructions + teq r3, r0, lsl #21 @ must be 2 MiB aligned + bne 0f + + adr_l r4, __pv_table_begin + adr_l r5, __pv_table_end + b __fixup_a_pv_table + +0: mov r0, r0 @ deadloop on error + b 0b +ENDPROC(__fixup_pv_table) + + .text +__fixup_a_pv_table: + adr_l r6, __pv_offset + ldr r0, [r6, #HIGH_OFFSET] @ pv_offset high word + ldr r6, [r6, #LOW_OFFSET] @ pv_offset low word + cmn r0, #1 +#ifdef CONFIG_THUMB2_KERNEL + @ + @ The Thumb-2 versions of the patchable sequences are + @ + @ phys-to-virt: movw <reg>, #offset<31:21> + @ lsl <reg>, #21 + @ sub <VA>, <PA>, <reg> + @ + @ virt-to-phys (non-LPAE): movw <reg>, #offset<31:21> + @ lsl <reg>, #21 + @ add <PA>, <VA>, <reg> + @ + @ virt-to-phys (LPAE): movw <reg>, #offset<31:21> + @ lsl <reg>, #21 + @ adds <PAlo>, <VA>, <reg> + @ mov <PAhi>, #offset<39:32> + @ adc <PAhi>, <PAhi>, #0 + @ + @ In the non-LPAE case, all patchable instructions are MOVW + @ instructions, where we need to patch in the offset into the + @ second halfword of the opcode (the 16-bit immediate is encoded + @ as imm4:i:imm3:imm8) + @ + @ 15 11 10 9 4 3 0 15 14 12 11 8 7 0 + @ +-----------+---+-------------+------++---+------+----+------+ + @ MOVW | 1 1 1 1 0 | i | 1 0 0 1 0 0 | imm4 || 0 | imm3 | Rd | imm8 | + @ +-----------+---+-------------+------++---+------+----+------+ + @ + @ In the LPAE case, we also need to patch in the high word of the + @ offset into the immediate field of the MOV instruction, or patch it + @ to a MVN instruction if the offset is negative. In this case, we + @ need to inspect the first halfword of the opcode, to check whether + @ it is MOVW or MOV/MVN, and to perform the MOV to MVN patching if + @ needed. The encoding of the immediate is rather complex for values + @ of i:imm3 != 0b0000, but fortunately, we never need more than 8 lower + @ order bits, which can be patched into imm8 directly (and i:imm3 + @ cleared) + @ + @ 15 11 10 9 5 0 15 14 12 11 8 7 0 + @ +-----------+---+---------------------++---+------+----+------+ + @ MOV | 1 1 1 1 0 | i | 0 0 0 1 0 0 1 1 1 1 || 0 | imm3 | Rd | imm8 | + @ MVN | 1 1 1 1 0 | i | 0 0 0 1 1 0 1 1 1 1 || 0 | imm3 | Rd | imm8 | + @ +-----------+---+---------------------++---+------+----+------+ + @ + moveq r0, #0x200000 @ set bit 21, mov to mvn instruction + lsrs r3, r6, #29 @ isolate top 3 bits of displacement + ubfx r6, r6, #21, #8 @ put bits 28:21 into the MOVW imm8 field + bfi r6, r3, #12, #3 @ put bits 31:29 into the MOVW imm3 field + b .Lnext +.Lloop: add r7, r4 + adds r4, #4 @ clears Z flag +#ifdef CONFIG_ARM_LPAE + ldrh ip, [r7] +ARM_BE8(rev16 ip, ip) + tst ip, #0x200 @ MOVW has bit 9 set, MVN has it clear + bne 0f @ skip to MOVW handling (Z flag is clear) + bic ip, #0x20 @ clear bit 5 (MVN -> MOV) + orr ip, ip, r0, lsr #16 @ MOV -> MVN if offset < 0 +ARM_BE8(rev16 ip, ip) + strh ip, [r7] + @ Z flag is set +0: +#endif + ldrh ip, [r7, #2] +ARM_BE8(rev16 ip, ip) + and ip, #0xf00 @ clear everything except Rd field + orreq ip, r0 @ Z flag set -> MOV/MVN -> patch in high bits + orrne ip, r6 @ Z flag clear -> MOVW -> patch in low bits +ARM_BE8(rev16 ip, ip) + strh ip, [r7, #2] +#else +#ifdef CONFIG_CPU_ENDIAN_BE8 +@ in BE8, we load data in BE, but instructions still in LE +#define PV_BIT24 0x00000001 +#define PV_IMM8_MASK 0xff000000 +#define PV_IMMR_MSB 0x00080000 +#else +#define PV_BIT24 0x01000000 +#define PV_IMM8_MASK 0x000000ff +#define PV_IMMR_MSB 0x00000800 +#endif + + @ + @ The ARM versions of the patchable sequences are + @ + @ phys-to-virt: sub <VA>, <PA>, #offset<31:24>, lsl #24 + @ sub <VA>, <PA>, #offset<23:16>, lsl #16 + @ + @ virt-to-phys (non-LPAE): add <PA>, <VA>, #offset<31:24>, lsl #24 + @ add <PA>, <VA>, #offset<23:16>, lsl #16 + @ + @ virt-to-phys (LPAE): movw <reg>, #offset<31:20> + @ adds <PAlo>, <VA>, <reg>, lsl #20 + @ mov <PAhi>, #offset<39:32> + @ adc <PAhi>, <PAhi>, #0 + @ + @ In the non-LPAE case, all patchable instructions are ADD or SUB + @ instructions, where we need to patch in the offset into the + @ immediate field of the opcode, which is emitted with the correct + @ rotation value. (The effective value of the immediate is imm12<7:0> + @ rotated right by [2 * imm12<11:8>] bits) + @ + @ 31 28 27 23 22 20 19 16 15 12 11 0 + @ +------+-----------------+------+------+-------+ + @ ADD | cond | 0 0 1 0 1 0 0 0 | Rn | Rd | imm12 | + @ SUB | cond | 0 0 1 0 0 1 0 0 | Rn | Rd | imm12 | + @ MOV | cond | 0 0 1 1 1 0 1 0 | Rn | Rd | imm12 | + @ MVN | cond | 0 0 1 1 1 1 1 0 | Rn | Rd | imm12 | + @ +------+-----------------+------+------+-------+ + @ + @ In the LPAE case, we use a MOVW instruction to carry the low offset + @ word, and patch in the high word of the offset into the immediate + @ field of the subsequent MOV instruction, or patch it to a MVN + @ instruction if the offset is negative. We can distinguish MOVW + @ instructions based on bits 23:22 of the opcode, and ADD/SUB can be + @ distinguished from MOV/MVN (all using the encodings above) using + @ bit 24. + @ + @ 31 28 27 23 22 20 19 16 15 12 11 0 + @ +------+-----------------+------+------+-------+ + @ MOVW | cond | 0 0 1 1 0 0 0 0 | imm4 | Rd | imm12 | + @ +------+-----------------+------+------+-------+ + @ + moveq r0, #0x400000 @ set bit 22, mov to mvn instruction + mov r3, r6, lsr #16 @ put offset bits 31-16 into r3 + mov r6, r6, lsr #24 @ put offset bits 31-24 into r6 + and r3, r3, #0xf0 @ only keep offset bits 23-20 in r3 + b .Lnext +.Lloop: ldr ip, [r7, r4] +#ifdef CONFIG_ARM_LPAE + tst ip, #PV_BIT24 @ ADD/SUB have bit 24 clear + beq 1f +ARM_BE8(rev ip, ip) + tst ip, #0xc00000 @ MOVW has bits 23:22 clear + bic ip, ip, #0x400000 @ clear bit 22 + bfc ip, #0, #12 @ clear imm12 field of MOV[W] instruction + orreq ip, ip, r6, lsl #4 @ MOVW -> mask in offset bits 31-24 + orreq ip, ip, r3, lsr #4 @ MOVW -> mask in offset bits 23-20 + orrne ip, ip, r0 @ MOV -> mask in offset bits 7-0 (or bit 22) +ARM_BE8(rev ip, ip) + b 2f +1: +#endif + tst ip, #PV_IMMR_MSB @ rotation value >= 16 ? + bic ip, ip, #PV_IMM8_MASK + orreq ip, ip, r6 ARM_BE8(, lsl #24) @ mask in offset bits 31-24 + orrne ip, ip, r3 ARM_BE8(, lsl #24) @ mask in offset bits 23-20 +2: + str ip, [r7, r4] + add r4, r4, #4 +#endif + +.Lnext: + cmp r4, r5 + ldrcc r7, [r4] @ use branch for delay slot + bcc .Lloop + ret lr +ENDPROC(__fixup_a_pv_table) + +ENTRY(fixup_pv_table) + stmfd sp!, {r4 - r7, lr} + mov r4, r0 @ r0 = table start + add r5, r0, r1 @ r1 = table size + bl __fixup_a_pv_table + ldmfd sp!, {r4 - r7, pc} +ENDPROC(fixup_pv_table) + + .data + .align 2 + .globl __pv_phys_pfn_offset + .type __pv_phys_pfn_offset, %object +__pv_phys_pfn_offset: + .word 0 + .size __pv_phys_pfn_offset, . -__pv_phys_pfn_offset + + .globl __pv_offset + .type __pv_offset, %object +__pv_offset: + .quad 0 + .size __pv_offset, . -__pv_offset diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index 3f65d0ac9f63..1a5edf562e85 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -18,6 +18,7 @@ #include <linux/of_platform.h> #include <linux/init.h> #include <linux/kexec.h> +#include <linux/libfdt.h> #include <linux/of_fdt.h> #include <linux/cpu.h> #include <linux/interrupt.h> @@ -58,6 +59,7 @@ #include <asm/unwind.h> #include <asm/memblock.h> #include <asm/virt.h> +#include <asm/kasan.h> #include "atags.h" @@ -763,7 +765,7 @@ int __init arm_add_memory(u64 start, u64 size) #ifndef CONFIG_PHYS_ADDR_T_64BIT if (aligned_start > ULONG_MAX) { pr_crit("Ignoring memory at 0x%08llx outside 32-bit physical address space\n", - (long long)start); + start); return -EINVAL; } @@ -1081,19 +1083,27 @@ void __init hyp_mode_check(void) void __init setup_arch(char **cmdline_p) { - const struct machine_desc *mdesc; + const struct machine_desc *mdesc = NULL; + void *atags_vaddr = NULL; + + if (__atags_pointer) + atags_vaddr = FDT_VIRT_BASE(__atags_pointer); setup_processor(); - mdesc = setup_machine_fdt(__atags_pointer); + if (atags_vaddr) { + mdesc = setup_machine_fdt(atags_vaddr); + if (mdesc) + memblock_reserve(__atags_pointer, + fdt_totalsize(atags_vaddr)); + } if (!mdesc) - mdesc = setup_machine_tags(__atags_pointer, __machine_arch_type); + mdesc = setup_machine_tags(atags_vaddr, __machine_arch_type); if (!mdesc) { early_print("\nError: invalid dtb and unrecognized/unsupported machine ID\n"); early_print(" r1=0x%08x, r2=0x%08x\n", __machine_arch_type, __atags_pointer); if (__atags_pointer) - early_print(" r2[]=%*ph\n", 16, - phys_to_virt(__atags_pointer)); + early_print(" r2[]=%*ph\n", 16, atags_vaddr); dump_machine_table(); } @@ -1126,7 +1136,7 @@ void __init setup_arch(char **cmdline_p) efi_init(); /* * Make sure the calculation for lowmem/highmem is set appropriately - * before reserving/allocating any mmeory + * before reserving/allocating any memory */ adjust_lowmem_bounds(); arm_memblock_init(mdesc); @@ -1136,6 +1146,7 @@ void __init setup_arch(char **cmdline_p) early_ioremap_reset(); paging_init(mdesc); + kasan_init(); request_standard_resources(mdesc); if (mdesc->restart) diff --git a/arch/arm/kernel/sleep.S b/arch/arm/kernel/sleep.S index 5dc8b80bb693..43077e11dafd 100644 --- a/arch/arm/kernel/sleep.S +++ b/arch/arm/kernel/sleep.S @@ -72,8 +72,9 @@ ENTRY(__cpu_suspend) ldr r3, =sleep_save_sp stmfd sp!, {r0, r1} @ save suspend func arg and pointer ldr r3, [r3, #SLEEP_SAVE_SP_VIRT] - ALT_SMP(ldr r0, =mpidr_hash) + ALT_SMP(W(nop)) @ don't use adr_l inside ALT_SMP() ALT_UP_B(1f) + adr_l r0, mpidr_hash /* This ldmia relies on the memory layout of the mpidr_hash struct */ ldmia r0, {r1, r6-r8} @ r1 = mpidr mask (r6,r7,r8) = l[0,1,2] shifts compute_mpidr_hash r0, r6, r7, r8, r2, r1 @@ -147,9 +148,8 @@ no_hyp: mov r1, #0 ALT_SMP(mrc p15, 0, r0, c0, c0, 5) ALT_UP_B(1f) - adr r2, mpidr_hash_ptr - ldr r3, [r2] - add r2, r2, r3 @ r2 = struct mpidr_hash phys address + adr_l r2, mpidr_hash @ r2 = struct mpidr_hash phys address + /* * This ldmia relies on the memory layout of the mpidr_hash * struct mpidr_hash. @@ -157,10 +157,7 @@ no_hyp: ldmia r2, { r3-r6 } @ r3 = mpidr mask (r4,r5,r6) = l[0,1,2] shifts compute_mpidr_hash r1, r4, r5, r6, r0, r3 1: - adr r0, _sleep_save_sp - ldr r2, [r0] - add r0, r0, r2 - ldr r0, [r0, #SLEEP_SAVE_SP_PHYS] + ldr_l r0, sleep_save_sp + SLEEP_SAVE_SP_PHYS ldr r0, [r0, r1, lsl #2] @ load phys pgd, stack, resume fn @@ -177,12 +174,6 @@ ENDPROC(cpu_resume_arm) ENDPROC(cpu_resume_no_hyp) #endif - .align 2 -_sleep_save_sp: - .long sleep_save_sp - . -mpidr_hash_ptr: - .long mpidr_hash - . @ mpidr_hash struct offset - .data .align 2 .type sleep_save_sp, #object diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c index 48099c6e1e4a..6ab2b0ad5f40 100644 --- a/arch/arm/kernel/smp.c +++ b/arch/arm/kernel/smp.c @@ -524,14 +524,13 @@ void __init smp_prepare_cpus(unsigned int max_cpus) } static const char *ipi_types[NR_IPI] __tracepoint_string = { -#define S(x,s) [x] = s - S(IPI_WAKEUP, "CPU wakeup interrupts"), - S(IPI_TIMER, "Timer broadcast interrupts"), - S(IPI_RESCHEDULE, "Rescheduling interrupts"), - S(IPI_CALL_FUNC, "Function call interrupts"), - S(IPI_CPU_STOP, "CPU stop interrupts"), - S(IPI_IRQ_WORK, "IRQ work interrupts"), - S(IPI_COMPLETION, "completion interrupts"), + [IPI_WAKEUP] = "CPU wakeup interrupts", + [IPI_TIMER] = "Timer broadcast interrupts", + [IPI_RESCHEDULE] = "Rescheduling interrupts", + [IPI_CALL_FUNC] = "Function call interrupts", + [IPI_CPU_STOP] = "CPU stop interrupts", + [IPI_IRQ_WORK] = "IRQ work interrupts", + [IPI_COMPLETION] = "completion interrupts", }; static void smp_cross_call(const struct cpumask *target, unsigned int ipinr); diff --git a/arch/arm/kernel/unwind.c b/arch/arm/kernel/unwind.c index d2bd0df2318d..59fdf257bf8b 100644 --- a/arch/arm/kernel/unwind.c +++ b/arch/arm/kernel/unwind.c @@ -18,9 +18,6 @@ #warning Your compiler does not have EABI support. #warning ARM unwind is known to compile only with EABI compilers. #warning Change compiler or disable ARM_UNWIND option. -#elif (__GNUC__ == 4 && __GNUC_MINOR__ <= 2) && !defined(__clang__) -#warning Your compiler is too buggy; it is known to not compile ARM unwind support. -#warning Change compiler or disable ARM_UNWIND option. #endif #endif /* __CHECKER__ */ @@ -236,7 +233,11 @@ static int unwind_pop_register(struct unwind_ctrl_block *ctrl, if (*vsp >= (unsigned long *)ctrl->sp_high) return -URC_FAILURE; - ctrl->vrs[reg] = *(*vsp)++; + /* Use READ_ONCE_NOCHECK here to avoid this memory access + * from being tracked by KASAN. + */ + ctrl->vrs[reg] = READ_ONCE_NOCHECK(*(*vsp)); + (*vsp)++; return URC_OK; } diff --git a/arch/arm/lib/memcpy.S b/arch/arm/lib/memcpy.S index 09a333153dc6..e4caf48c089f 100644 --- a/arch/arm/lib/memcpy.S +++ b/arch/arm/lib/memcpy.S @@ -58,10 +58,12 @@ /* Prototype: void *memcpy(void *dest, const void *src, size_t n); */ +ENTRY(__memcpy) ENTRY(mmiocpy) -ENTRY(memcpy) +WEAK(memcpy) #include "copy_template.S" ENDPROC(memcpy) ENDPROC(mmiocpy) +ENDPROC(__memcpy) diff --git a/arch/arm/lib/memmove.S b/arch/arm/lib/memmove.S index b50e5770fb44..6fecc12a1f51 100644 --- a/arch/arm/lib/memmove.S +++ b/arch/arm/lib/memmove.S @@ -24,12 +24,13 @@ * occurring in the opposite direction. */ -ENTRY(memmove) +ENTRY(__memmove) +WEAK(memmove) UNWIND( .fnstart ) subs ip, r0, r1 cmphi r2, ip - bls memcpy + bls __memcpy stmfd sp!, {r0, r4, lr} UNWIND( .fnend ) @@ -222,3 +223,4 @@ ENTRY(memmove) 18: backward_copy_shift push=24 pull=8 ENDPROC(memmove) +ENDPROC(__memmove) diff --git a/arch/arm/lib/memset.S b/arch/arm/lib/memset.S index 6ca4535c47fb..9817cb258c1a 100644 --- a/arch/arm/lib/memset.S +++ b/arch/arm/lib/memset.S @@ -13,8 +13,9 @@ .text .align 5 +ENTRY(__memset) ENTRY(mmioset) -ENTRY(memset) +WEAK(memset) UNWIND( .fnstart ) ands r3, r0, #3 @ 1 unaligned? mov ip, r0 @ preserve r0 as return value @@ -132,6 +133,7 @@ UNWIND( .fnstart ) UNWIND( .fnend ) ENDPROC(memset) ENDPROC(mmioset) +ENDPROC(__memset) ENTRY(__memset32) UNWIND( .fnstart ) diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index 65e4482e3849..02692fbe2db5 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -743,6 +743,7 @@ config SWP_EMULATE config CPU_BIG_ENDIAN bool "Build big-endian kernel" depends on ARCH_SUPPORTS_BIG_ENDIAN + depends on !LD_IS_LLD help Say Y if you plan on running a kernel in big-endian mode. Note that your board must be properly built and your board diff --git a/arch/arm/mm/Makefile b/arch/arm/mm/Makefile index c4ce477c5261..3510503bc5e6 100644 --- a/arch/arm/mm/Makefile +++ b/arch/arm/mm/Makefile @@ -7,6 +7,7 @@ obj-y := extable.o fault.o init.o iomap.o obj-y += dma-mapping$(MMUEXT).o obj-$(CONFIG_MMU) += fault-armv.o flush.o idmap.o ioremap.o \ mmap.o pgd.o mmu.o pageattr.o +KASAN_SANITIZE_mmu.o := n ifneq ($(CONFIG_MMU),y) obj-y += nommu.o @@ -16,6 +17,7 @@ endif obj-$(CONFIG_ARM_PTDUMP_CORE) += dump.o obj-$(CONFIG_ARM_PTDUMP_DEBUGFS) += ptdump_debugfs.o obj-$(CONFIG_MODULES) += proc-syms.o +KASAN_SANITIZE_physaddr.o := n obj-$(CONFIG_DEBUG_VIRTUAL) += physaddr.o obj-$(CONFIG_ALIGNMENT_TRAP) += alignment.o @@ -110,3 +112,6 @@ obj-$(CONFIG_CACHE_L2X0_PMU) += cache-l2x0-pmu.o obj-$(CONFIG_CACHE_XSC3L2) += cache-xsc3l2.o obj-$(CONFIG_CACHE_TAUROS2) += cache-tauros2.o obj-$(CONFIG_CACHE_UNIPHIER) += cache-uniphier.o + +KASAN_SANITIZE_kasan_init.o := n +obj-$(CONFIG_KASAN) += kasan_init.o diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c index db623d7c30de..828a2561b229 100644 --- a/arch/arm/mm/init.c +++ b/arch/arm/mm/init.c @@ -223,7 +223,6 @@ void __init arm_memblock_init(const struct machine_desc *mdesc) if (mdesc->reserve) mdesc->reserve(); - early_init_fdt_reserve_self(); early_init_fdt_scan_reserved_mem(); /* reserve memory for DMA contiguous allocations */ diff --git a/arch/arm/mm/kasan_init.c b/arch/arm/mm/kasan_init.c new file mode 100644 index 000000000000..9c348042a724 --- /dev/null +++ b/arch/arm/mm/kasan_init.c @@ -0,0 +1,291 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * This file contains kasan initialization code for ARM. + * + * Copyright (c) 2018 Samsung Electronics Co., Ltd. + * Author: Andrey Ryabinin <ryabinin.a.a@gmail.com> + * Author: Linus Walleij <linus.walleij@linaro.org> + */ + +#define pr_fmt(fmt) "kasan: " fmt +#include <linux/kasan.h> +#include <linux/kernel.h> +#include <linux/memblock.h> +#include <linux/sched/task.h> +#include <linux/start_kernel.h> +#include <linux/pgtable.h> +#include <asm/cputype.h> +#include <asm/highmem.h> +#include <asm/mach/map.h> +#include <asm/memory.h> +#include <asm/page.h> +#include <asm/pgalloc.h> +#include <asm/procinfo.h> +#include <asm/proc-fns.h> + +#include "mm.h" + +static pgd_t tmp_pgd_table[PTRS_PER_PGD] __initdata __aligned(PGD_SIZE); + +pmd_t tmp_pmd_table[PTRS_PER_PMD] __page_aligned_bss; + +static __init void *kasan_alloc_block(size_t size) +{ + return memblock_alloc_try_nid(size, size, __pa(MAX_DMA_ADDRESS), + MEMBLOCK_ALLOC_KASAN, NUMA_NO_NODE); +} + +static void __init kasan_pte_populate(pmd_t *pmdp, unsigned long addr, + unsigned long end, bool early) +{ + unsigned long next; + pte_t *ptep = pte_offset_kernel(pmdp, addr); + + do { + pte_t entry; + void *p; + + next = addr + PAGE_SIZE; + + if (!early) { + if (!pte_none(READ_ONCE(*ptep))) + continue; + + p = kasan_alloc_block(PAGE_SIZE); + if (!p) { + panic("%s failed to allocate shadow page for address 0x%lx\n", + __func__, addr); + return; + } + memset(p, KASAN_SHADOW_INIT, PAGE_SIZE); + entry = pfn_pte(virt_to_pfn(p), + __pgprot(pgprot_val(PAGE_KERNEL))); + } else if (pte_none(READ_ONCE(*ptep))) { + /* + * The early shadow memory is mapping all KASan + * operations to one and the same page in memory, + * "kasan_early_shadow_page" so that the instrumentation + * will work on a scratch area until we can set up the + * proper KASan shadow memory. + */ + entry = pfn_pte(virt_to_pfn(kasan_early_shadow_page), + __pgprot(_L_PTE_DEFAULT | L_PTE_DIRTY | L_PTE_XN)); + } else { + /* + * Early shadow mappings are PMD_SIZE aligned, so if the + * first entry is already set, they must all be set. + */ + return; + } + + set_pte_at(&init_mm, addr, ptep, entry); + } while (ptep++, addr = next, addr != end); +} + +/* + * The pmd (page middle directory) is only used on LPAE + */ +static void __init kasan_pmd_populate(pud_t *pudp, unsigned long addr, + unsigned long end, bool early) +{ + unsigned long next; + pmd_t *pmdp = pmd_offset(pudp, addr); + + do { + if (pmd_none(*pmdp)) { + /* + * We attempt to allocate a shadow block for the PMDs + * used by the PTEs for this address if it isn't already + * allocated. + */ + void *p = early ? kasan_early_shadow_pte : + kasan_alloc_block(PAGE_SIZE); + + if (!p) { + panic("%s failed to allocate shadow block for address 0x%lx\n", + __func__, addr); + return; + } + pmd_populate_kernel(&init_mm, pmdp, p); + flush_pmd_entry(pmdp); + } + + next = pmd_addr_end(addr, end); + kasan_pte_populate(pmdp, addr, next, early); + } while (pmdp++, addr = next, addr != end); +} + +static void __init kasan_pgd_populate(unsigned long addr, unsigned long end, + bool early) +{ + unsigned long next; + pgd_t *pgdp; + p4d_t *p4dp; + pud_t *pudp; + + pgdp = pgd_offset_k(addr); + + do { + /* + * Allocate and populate the shadow block of p4d folded into + * pud folded into pmd if it doesn't already exist + */ + if (!early && pgd_none(*pgdp)) { + void *p = kasan_alloc_block(PAGE_SIZE); + + if (!p) { + panic("%s failed to allocate shadow block for address 0x%lx\n", + __func__, addr); + return; + } + pgd_populate(&init_mm, pgdp, p); + } + + next = pgd_addr_end(addr, end); + /* + * We just immediately jump over the p4d and pud page + * directories since we believe ARM32 will never gain four + * nor five level page tables. + */ + p4dp = p4d_offset(pgdp, addr); + pudp = pud_offset(p4dp, addr); + + kasan_pmd_populate(pudp, addr, next, early); + } while (pgdp++, addr = next, addr != end); +} + +extern struct proc_info_list *lookup_processor_type(unsigned int); + +void __init kasan_early_init(void) +{ + struct proc_info_list *list; + + /* + * locate processor in the list of supported processor + * types. The linker builds this table for us from the + * entries in arch/arm/mm/proc-*.S + */ + list = lookup_processor_type(read_cpuid_id()); + if (list) { +#ifdef MULTI_CPU + processor = *list->proc; +#endif + } + + BUILD_BUG_ON((KASAN_SHADOW_END - (1UL << 29)) != KASAN_SHADOW_OFFSET); + /* + * We walk the page table and set all of the shadow memory to point + * to the scratch page. + */ + kasan_pgd_populate(KASAN_SHADOW_START, KASAN_SHADOW_END, true); +} + +static void __init clear_pgds(unsigned long start, + unsigned long end) +{ + for (; start && start < end; start += PMD_SIZE) + pmd_clear(pmd_off_k(start)); +} + +static int __init create_mapping(void *start, void *end) +{ + void *shadow_start, *shadow_end; + + shadow_start = kasan_mem_to_shadow(start); + shadow_end = kasan_mem_to_shadow(end); + + pr_info("Mapping kernel virtual memory block: %px-%px at shadow: %px-%px\n", + start, end, shadow_start, shadow_end); + + kasan_pgd_populate((unsigned long)shadow_start & PAGE_MASK, + PAGE_ALIGN((unsigned long)shadow_end), false); + return 0; +} + +void __init kasan_init(void) +{ + phys_addr_t pa_start, pa_end; + u64 i; + + /* + * We are going to perform proper setup of shadow memory. + * + * At first we should unmap early shadow (clear_pgds() call bellow). + * However, instrumented code can't execute without shadow memory. + * + * To keep the early shadow memory MMU tables around while setting up + * the proper shadow memory, we copy swapper_pg_dir (the initial page + * table) to tmp_pgd_table and use that to keep the early shadow memory + * mapped until the full shadow setup is finished. Then we swap back + * to the proper swapper_pg_dir. + */ + + memcpy(tmp_pgd_table, swapper_pg_dir, sizeof(tmp_pgd_table)); +#ifdef CONFIG_ARM_LPAE + /* We need to be in the same PGD or this won't work */ + BUILD_BUG_ON(pgd_index(KASAN_SHADOW_START) != + pgd_index(KASAN_SHADOW_END)); + memcpy(tmp_pmd_table, + pgd_page_vaddr(*pgd_offset_k(KASAN_SHADOW_START)), + sizeof(tmp_pmd_table)); + set_pgd(&tmp_pgd_table[pgd_index(KASAN_SHADOW_START)], + __pgd(__pa(tmp_pmd_table) | PMD_TYPE_TABLE | L_PGD_SWAPPER)); +#endif + cpu_switch_mm(tmp_pgd_table, &init_mm); + local_flush_tlb_all(); + + clear_pgds(KASAN_SHADOW_START, KASAN_SHADOW_END); + + kasan_populate_early_shadow(kasan_mem_to_shadow((void *)VMALLOC_START), + kasan_mem_to_shadow((void *)-1UL) + 1); + + for_each_mem_range(i, &pa_start, &pa_end) { + void *start = __va(pa_start); + void *end = __va(pa_end); + + /* Do not attempt to shadow highmem */ + if (pa_start >= arm_lowmem_limit) { + pr_info("Skip highmem block at %pa-%pa\n", &pa_start, &pa_end); + continue; + } + if (pa_end > arm_lowmem_limit) { + pr_info("Truncating shadow for memory block at %pa-%pa to lowmem region at %pa\n", + &pa_start, &pa_end, &arm_lowmem_limit); + end = __va(arm_lowmem_limit); + } + if (start >= end) { + pr_info("Skipping invalid memory block %pa-%pa (virtual %p-%p)\n", + &pa_start, &pa_end, start, end); + continue; + } + + create_mapping(start, end); + } + + /* + * 1. The module global variables are in MODULES_VADDR ~ MODULES_END, + * so we need to map this area. + * 2. PKMAP_BASE ~ PKMAP_BASE+PMD_SIZE's shadow and MODULES_VADDR + * ~ MODULES_END's shadow is in the same PMD_SIZE, so we can't + * use kasan_populate_zero_shadow. + */ + create_mapping((void *)MODULES_VADDR, (void *)(PKMAP_BASE + PMD_SIZE)); + + /* + * KAsan may reuse the contents of kasan_early_shadow_pte directly, so + * we should make sure that it maps the zero page read-only. + */ + for (i = 0; i < PTRS_PER_PTE; i++) + set_pte_at(&init_mm, KASAN_SHADOW_START + i*PAGE_SIZE, + &kasan_early_shadow_pte[i], + pfn_pte(virt_to_pfn(kasan_early_shadow_page), + __pgprot(pgprot_val(PAGE_KERNEL) + | L_PTE_RDONLY))); + + cpu_switch_mm(swapper_pg_dir, &init_mm); + local_flush_tlb_all(); + + memset(kasan_early_shadow_page, 0, PAGE_SIZE); + pr_info("Kernel address sanitizer initialized\n"); + init_task.kasan_depth = 0; +} diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index ab69250a86bc..c06ebfbc48c4 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -29,6 +29,7 @@ #include <asm/procinfo.h> #include <asm/memory.h> #include <asm/pgalloc.h> +#include <asm/kasan_def.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -39,6 +40,8 @@ #include "mm.h" #include "tcm.h" +extern unsigned long __atags_pointer; + /* * empty_zero_page is a special page that is used for * zero-initialized data and COW. @@ -946,7 +949,7 @@ static void __init create_mapping(struct map_desc *md) return; } - if ((md->type == MT_DEVICE || md->type == MT_ROM) && + if (md->type == MT_DEVICE && md->virtual >= PAGE_OFFSET && md->virtual < FIXADDR_START && (md->virtual < VMALLOC_START || md->virtual >= VMALLOC_END)) { pr_warn("BUG: mapping for 0x%08llx at 0x%08lx out of vmalloc space\n", @@ -1253,8 +1256,25 @@ static inline void prepare_page_table(void) /* * Clear out all the mappings below the kernel image. */ +#ifdef CONFIG_KASAN + /* + * KASan's shadow memory inserts itself between the TASK_SIZE + * and MODULES_VADDR. Do not clear the KASan shadow memory mappings. + */ + for (addr = 0; addr < KASAN_SHADOW_START; addr += PMD_SIZE) + pmd_clear(pmd_off_k(addr)); + /* + * Skip over the KASan shadow area. KASAN_SHADOW_END is sometimes + * equal to MODULES_VADDR and then we exit the pmd clearing. If we + * are using a thumb-compiled kernel, there there will be 8MB more + * to clear as KASan always offset to 16 MB below MODULES_VADDR. + */ + for (addr = KASAN_SHADOW_END; addr < MODULES_VADDR; addr += PMD_SIZE) + pmd_clear(pmd_off_k(addr)); +#else for (addr = 0; addr < MODULES_VADDR; addr += PMD_SIZE) pmd_clear(pmd_off_k(addr)); +#endif #ifdef CONFIG_XIP_KERNEL /* The XIP kernel is mapped in the module area -- skip over it */ @@ -1333,6 +1353,15 @@ static void __init devicemaps_init(const struct machine_desc *mdesc) for (addr = VMALLOC_START; addr < (FIXADDR_TOP & PMD_MASK); addr += PMD_SIZE) pmd_clear(pmd_off_k(addr)); + if (__atags_pointer) { + /* create a read-only mapping of the device tree */ + map.pfn = __phys_to_pfn(__atags_pointer & SECTION_MASK); + map.virtual = FDT_FIXED_BASE; + map.length = FDT_FIXED_SIZE; + map.type = MT_ROM; + create_mapping(&map); + } + /* * Map the kernel if it is XIP. * It is always first in the modulearea. @@ -1489,8 +1518,7 @@ static void __init map_lowmem(void) } #ifdef CONFIG_ARM_PV_FIXUP -extern unsigned long __atags_pointer; -typedef void pgtables_remap(long long offset, unsigned long pgd, void *bdata); +typedef void pgtables_remap(long long offset, unsigned long pgd); pgtables_remap lpae_pgtables_remap_asm; /* @@ -1503,7 +1531,6 @@ static void __init early_paging_init(const struct machine_desc *mdesc) unsigned long pa_pgd; unsigned int cr, ttbcr; long long offset; - void *boot_data; if (!mdesc->pv_fixup) return; @@ -1520,7 +1547,6 @@ static void __init early_paging_init(const struct machine_desc *mdesc) */ lpae_pgtables_remap = (pgtables_remap *)(unsigned long)__pa(lpae_pgtables_remap_asm); pa_pgd = __pa(swapper_pg_dir); - boot_data = __va(__atags_pointer); barrier(); pr_info("Switching physical address space to 0x%08llx\n", @@ -1556,7 +1582,7 @@ static void __init early_paging_init(const struct machine_desc *mdesc) * needs to be assembly. It's fairly simple, as we're using the * temporary tables setup by the initial assembly code. */ - lpae_pgtables_remap(offset, pa_pgd, boot_data); + lpae_pgtables_remap(offset, pa_pgd); /* Re-enable the caches and cacheable TLB walks */ asm volatile("mcr p15, 0, %0, c2, c0, 2" : : "r" (ttbcr)); diff --git a/arch/arm/mm/pgd.c b/arch/arm/mm/pgd.c index c5e1b27046a8..f8e9bc58a84f 100644 --- a/arch/arm/mm/pgd.c +++ b/arch/arm/mm/pgd.c @@ -66,7 +66,21 @@ pgd_t *pgd_alloc(struct mm_struct *mm) new_pmd = pmd_alloc(mm, new_pud, 0); if (!new_pmd) goto no_pmd; -#endif +#ifdef CONFIG_KASAN + /* + * Copy PMD table for KASAN shadow mappings. + */ + init_pgd = pgd_offset_k(TASK_SIZE); + init_p4d = p4d_offset(init_pgd, TASK_SIZE); + init_pud = pud_offset(init_p4d, TASK_SIZE); + init_pmd = pmd_offset(init_pud, TASK_SIZE); + new_pmd = pmd_offset(new_pud, TASK_SIZE); + memcpy(new_pmd, init_pmd, + (pmd_index(MODULES_VADDR) - pmd_index(TASK_SIZE)) + * sizeof(pmd_t)); + clean_dcache_area(new_pmd, PTRS_PER_PMD * sizeof(pmd_t)); +#endif /* CONFIG_KASAN */ +#endif /* CONFIG_LPAE */ if (!vectors_high()) { /* diff --git a/arch/arm/mm/pv-fixup-asm.S b/arch/arm/mm/pv-fixup-asm.S index 8eade0416739..5c5e1952000a 100644 --- a/arch/arm/mm/pv-fixup-asm.S +++ b/arch/arm/mm/pv-fixup-asm.S @@ -39,8 +39,8 @@ ENTRY(lpae_pgtables_remap_asm) /* Update level 2 entries for the boot data */ add r7, r2, #0x1000 - add r7, r7, r3, lsr #SECTION_SHIFT - L2_ORDER - bic r7, r7, #(1 << L2_ORDER) - 1 + movw r3, #FDT_FIXED_BASE >> (SECTION_SHIFT - L2_ORDER) + add r7, r7, r3 ldrd r4, r5, [r7] adds r4, r4, r0 adc r5, r5, r1 diff --git a/arch/arm/vdso/Makefile b/arch/arm/vdso/Makefile index 150ce6e6a5d3..b558bee0e1f6 100644 --- a/arch/arm/vdso/Makefile +++ b/arch/arm/vdso/Makefile @@ -42,6 +42,8 @@ GCOV_PROFILE := n # Prevents link failures: __sanitizer_cov_trace_pc() is not linked in. KCOV_INSTRUMENT := n +KASAN_SANITIZE := n + # Force dependency $(obj)/vdso.o : $(obj)/vdso.so diff --git a/arch/arm/vfp/entry.S b/arch/arm/vfp/entry.S index 0186cf9da890..27b0a1f27fbd 100644 --- a/arch/arm/vfp/entry.S +++ b/arch/arm/vfp/entry.S @@ -37,20 +37,3 @@ ENDPROC(vfp_null_entry) .align 2 .LCvfp: .word vfp_vector - -@ This code is called if the VFP does not exist. It needs to flag the -@ failure to the VFP initialisation code. - - __INIT -ENTRY(vfp_testing_entry) - dec_preempt_count_ti r10, r4 - ldr r0, VFP_arch_address - str r0, [r0] @ set to non-zero value - ret r9 @ we have handled the fault -ENDPROC(vfp_testing_entry) - - .align 2 -VFP_arch_address: - .word VFP_arch - - __FINIT diff --git a/arch/arm/vfp/vfphw.S b/arch/arm/vfp/vfphw.S index 4fcff9f59947..d5837bf05a9a 100644 --- a/arch/arm/vfp/vfphw.S +++ b/arch/arm/vfp/vfphw.S @@ -79,11 +79,6 @@ ENTRY(vfp_support_entry) DBGSTR3 "instr %08x pc %08x state %p", r0, r2, r10 .fpu vfpv2 - ldr r3, [sp, #S_PSR] @ Neither lazy restore nor FP exceptions - and r3, r3, #MODE_MASK @ are supported in kernel mode - teq r3, #USR_MODE - bne vfp_kmode_exception @ Returns through lr - VFPFMRX r1, FPEXC @ Is the VFP enabled? DBGSTR1 "fpexc %08x", r1 tst r1, #FPEXC_EN diff --git a/arch/arm/vfp/vfpmodule.c b/arch/arm/vfp/vfpmodule.c index 8c9e7f9f0277..2cb355c1b5b7 100644 --- a/arch/arm/vfp/vfpmodule.c +++ b/arch/arm/vfp/vfpmodule.c @@ -23,6 +23,7 @@ #include <asm/cputype.h> #include <asm/system_info.h> #include <asm/thread_notify.h> +#include <asm/traps.h> #include <asm/vfp.h> #include "vfpinstr.h" @@ -31,7 +32,6 @@ /* * Our undef handlers (in entry.S) */ -asmlinkage void vfp_testing_entry(void); asmlinkage void vfp_support_entry(void); asmlinkage void vfp_null_entry(void); @@ -42,7 +42,7 @@ asmlinkage void (*vfp_vector)(void) = vfp_null_entry; * Used in startup: set to non-zero if VFP checks fail * After startup, holds VFP architecture */ -unsigned int VFP_arch; +static unsigned int __initdata VFP_arch; /* * The pointer to the vfpstate structure of the thread which currently @@ -436,7 +436,7 @@ static void vfp_enable(void *unused) * present on all CPUs within a SMP complex. Needs to be called prior to * vfp_init(). */ -void vfp_disable(void) +void __init vfp_disable(void) { if (VFP_arch) { pr_debug("%s: should be called prior to vfp_init\n", __func__); @@ -642,7 +642,9 @@ static int vfp_starting_cpu(unsigned int unused) return 0; } -void vfp_kmode_exception(void) +#ifdef CONFIG_KERNEL_MODE_NEON + +static int vfp_kmode_exception(struct pt_regs *regs, unsigned int instr) { /* * If we reach this point, a floating point exception has been raised @@ -660,9 +662,51 @@ void vfp_kmode_exception(void) pr_crit("BUG: unsupported FP instruction in kernel mode\n"); else pr_crit("BUG: FP instruction issued in kernel mode with FP unit disabled\n"); + pr_crit("FPEXC == 0x%08x\n", fmrx(FPEXC)); + return 1; } -#ifdef CONFIG_KERNEL_MODE_NEON +static struct undef_hook vfp_kmode_exception_hook[] = {{ + .instr_mask = 0xfe000000, + .instr_val = 0xf2000000, + .cpsr_mask = MODE_MASK | PSR_T_BIT, + .cpsr_val = SVC_MODE, + .fn = vfp_kmode_exception, +}, { + .instr_mask = 0xff100000, + .instr_val = 0xf4000000, + .cpsr_mask = MODE_MASK | PSR_T_BIT, + .cpsr_val = SVC_MODE, + .fn = vfp_kmode_exception, +}, { + .instr_mask = 0xef000000, + .instr_val = 0xef000000, + .cpsr_mask = MODE_MASK | PSR_T_BIT, + .cpsr_val = SVC_MODE | PSR_T_BIT, + .fn = vfp_kmode_exception, +}, { + .instr_mask = 0xff100000, + .instr_val = 0xf9000000, + .cpsr_mask = MODE_MASK | PSR_T_BIT, + .cpsr_val = SVC_MODE | PSR_T_BIT, + .fn = vfp_kmode_exception, +}, { + .instr_mask = 0x0c000e00, + .instr_val = 0x0c000a00, + .cpsr_mask = MODE_MASK, + .cpsr_val = SVC_MODE, + .fn = vfp_kmode_exception, +}}; + +static int __init vfp_kmode_exception_hook_init(void) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(vfp_kmode_exception_hook); i++) + register_undef_hook(&vfp_kmode_exception_hook[i]); + return 0; +} +subsys_initcall(vfp_kmode_exception_hook_init); /* * Kernel-side NEON support functions @@ -708,6 +752,21 @@ EXPORT_SYMBOL(kernel_neon_end); #endif /* CONFIG_KERNEL_MODE_NEON */ +static int __init vfp_detect(struct pt_regs *regs, unsigned int instr) +{ + VFP_arch = UINT_MAX; /* mark as not present */ + regs->ARM_pc += 4; + return 0; +} + +static struct undef_hook vfp_detect_hook __initdata = { + .instr_mask = 0x0c000e00, + .instr_val = 0x0c000a00, + .cpsr_mask = MODE_MASK, + .cpsr_val = SVC_MODE, + .fn = vfp_detect, +}; + /* * VFP support code initialisation. */ @@ -728,10 +787,11 @@ static int __init vfp_init(void) * The handler is already setup to just log calls, so * we just need to read the VFPSID register. */ - vfp_vector = vfp_testing_entry; + register_undef_hook(&vfp_detect_hook); barrier(); vfpsid = fmrx(FPSID); barrier(); + unregister_undef_hook(&vfp_detect_hook); vfp_vector = vfp_null_entry; pr_info("VFP support v0.3: "); |