diff options
| author | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2013-03-21 16:07:34 -0700 |
|---|---|---|
| committer | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2013-03-21 16:07:34 -0700 |
| commit | 23a376f98c5dcfc392d47e8d1872884ff44e585d (patch) | |
| tree | dbe476151bbd6530369c40746f2ec2365f7b500a /arch | |
| parent | 8358f6242dd447a4f694c7bc949bbfc842ca5db1 (diff) | |
| parent | a937536b868b8369b98967929045f1df54234323 (diff) | |
Merge 3.9-rc3 into tty-next
Diffstat (limited to 'arch')
101 files changed, 200 insertions, 192 deletions
diff --git a/arch/Kconfig b/arch/Kconfig index 5a1779c93940..1455579791ec 100644 --- a/arch/Kconfig +++ b/arch/Kconfig @@ -319,13 +319,6 @@ config ARCH_WANT_OLD_COMPAT_IPC select ARCH_WANT_COMPAT_IPC_PARSE_VERSION bool -config HAVE_VIRT_TO_BUS - bool - help - An architecture should select this if it implements the - deprecated interface virt_to_bus(). All new architectures - should probably not select this. - config HAVE_ARCH_SECCOMP_FILTER bool help diff --git a/arch/alpha/Kconfig b/arch/alpha/Kconfig index 5833aa441481..8a33ba01301f 100644 --- a/arch/alpha/Kconfig +++ b/arch/alpha/Kconfig @@ -9,7 +9,7 @@ config ALPHA select HAVE_PERF_EVENTS select HAVE_DMA_ATTRS select HAVE_GENERIC_HARDIRQS - select HAVE_VIRT_TO_BUS + select VIRT_TO_BUS select GENERIC_IRQ_PROBE select AUTO_IRQ_AFFINITY if SMP select GENERIC_IRQ_SHOW diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 5b714695b01b..2c3bdce15134 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -49,7 +49,7 @@ config ARM select HAVE_REGS_AND_STACK_ACCESS_API select HAVE_SYSCALL_TRACEPOINTS select HAVE_UID16 - select HAVE_VIRT_TO_BUS + select VIRT_TO_BUS select KTIME_SCALAR select PERF_USE_VMALLOC select RTC_LIB @@ -556,7 +556,6 @@ config ARCH_IXP4XX config ARCH_DOVE bool "Marvell Dove" select ARCH_REQUIRE_GPIOLIB - select COMMON_CLK_DOVE select CPU_V7 select GENERIC_CLOCKEVENTS select MIGHT_HAVE_PCI @@ -1657,13 +1656,16 @@ config LOCAL_TIMERS accounting to be spread across the timer interval, preventing a "thundering herd" at every timer tick. +# The GPIO number here must be sorted by descending number. In case of +# a multiplatform kernel, we just want the highest value required by the +# selected platforms. config ARCH_NR_GPIO int default 1024 if ARCH_SHMOBILE || ARCH_TEGRA - default 355 if ARCH_U8500 - default 264 if MACH_H4700 default 512 if SOC_OMAP5 + default 355 if ARCH_U8500 default 288 if ARCH_VT8500 || ARCH_SUNXI + default 264 if MACH_H4700 default 0 help Maximum number of GPIOs in the system. @@ -1887,8 +1889,9 @@ config XEN_DOM0 config XEN bool "Xen guest support on ARM (EXPERIMENTAL)" - depends on ARM && OF + depends on ARM && AEABI && OF depends on CPU_V7 && !CPU_V6 + depends on !GENERIC_ATOMIC64 help Say Y if you want to run Linux in a Virtual Machine on Xen on ARM. diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index acddddac7ee4..ecfcdba2d17c 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -492,7 +492,7 @@ config DEBUG_IMX_UART_PORT DEBUG_IMX31_UART || \ DEBUG_IMX35_UART || \ DEBUG_IMX51_UART || \ - DEBUG_IMX50_IMX53_UART || \ + DEBUG_IMX53_UART || \ DEBUG_IMX6Q_UART default 1 help diff --git a/arch/arm/boot/Makefile b/arch/arm/boot/Makefile index 71768b8a1ab9..84aa2caf07ed 100644 --- a/arch/arm/boot/Makefile +++ b/arch/arm/boot/Makefile @@ -115,4 +115,4 @@ i: $(CONFIG_SHELL) $(srctree)/$(src)/install.sh $(KERNELRELEASE) \ $(obj)/Image System.map "$(INSTALL_PATH)" -subdir- := bootp compressed +subdir- := bootp compressed dts diff --git a/arch/arm/boot/dts/armada-370-rd.dts b/arch/arm/boot/dts/armada-370-rd.dts index f8e4855bc9a5..070bba4f2585 100644 --- a/arch/arm/boot/dts/armada-370-rd.dts +++ b/arch/arm/boot/dts/armada-370-rd.dts @@ -64,5 +64,13 @@ status = "okay"; /* No CD or WP GPIOs */ }; + + usb@d0050000 { + status = "okay"; + }; + + usb@d0051000 { + status = "okay"; + }; }; }; diff --git a/arch/arm/boot/dts/armada-370-xp.dtsi b/arch/arm/boot/dts/armada-370-xp.dtsi index 6f1acc75e155..5b708208b607 100644 --- a/arch/arm/boot/dts/armada-370-xp.dtsi +++ b/arch/arm/boot/dts/armada-370-xp.dtsi @@ -31,7 +31,6 @@ mpic: interrupt-controller@d0020000 { compatible = "marvell,mpic"; #interrupt-cells = <1>; - #address-cells = <1>; #size-cells = <1>; interrupt-controller; }; @@ -54,7 +53,7 @@ reg = <0xd0012000 0x100>; reg-shift = <2>; interrupts = <41>; - reg-io-width = <4>; + reg-io-width = <1>; status = "disabled"; }; serial@d0012100 { @@ -62,7 +61,7 @@ reg = <0xd0012100 0x100>; reg-shift = <2>; interrupts = <42>; - reg-io-width = <4>; + reg-io-width = <1>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/armada-xp.dtsi index 1443949c165e..ca00d8326c87 100644 --- a/arch/arm/boot/dts/armada-xp.dtsi +++ b/arch/arm/boot/dts/armada-xp.dtsi @@ -46,7 +46,7 @@ reg = <0xd0012200 0x100>; reg-shift = <2>; interrupts = <43>; - reg-io-width = <4>; + reg-io-width = <1>; status = "disabled"; }; serial@d0012300 { @@ -54,7 +54,7 @@ reg = <0xd0012300 0x100>; reg-shift = <2>; interrupts = <44>; - reg-io-width = <4>; + reg-io-width = <1>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/bcm2835.dtsi b/arch/arm/boot/dts/bcm2835.dtsi index 4bf2a8774aa7..7e0481e2441a 100644 --- a/arch/arm/boot/dts/bcm2835.dtsi +++ b/arch/arm/boot/dts/bcm2835.dtsi @@ -105,7 +105,7 @@ compatible = "fixed-clock"; reg = <1>; #clock-cells = <0>; - clock-frequency = <150000000>; + clock-frequency = <250000000>; }; }; }; diff --git a/arch/arm/boot/dts/dbx5x0.dtsi b/arch/arm/boot/dts/dbx5x0.dtsi index 69140ba99f46..9de93096601a 100644 --- a/arch/arm/boot/dts/dbx5x0.dtsi +++ b/arch/arm/boot/dts/dbx5x0.dtsi @@ -319,9 +319,8 @@ }; }; - ab8500@5 { + ab8500 { compatible = "stericsson,ab8500"; - reg = <5>; /* mailbox 5 is i2c */ interrupt-parent = <&intc>; interrupts = <0 40 0x4>; interrupt-controller; diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/dove.dtsi index 67dbe20868a2..f7509cafc377 100644 --- a/arch/arm/boot/dts/dove.dtsi +++ b/arch/arm/boot/dts/dove.dtsi @@ -197,6 +197,11 @@ status = "disabled"; }; + rtc@d8500 { + compatible = "marvell,orion-rtc"; + reg = <0xd8500 0x20>; + }; + crypto: crypto@30000 { compatible = "marvell,orion-crypto"; reg = <0x30000 0x10000>, diff --git a/arch/arm/boot/dts/href.dtsi b/arch/arm/boot/dts/href.dtsi index 592fb9dc35bd..379128eb9d98 100644 --- a/arch/arm/boot/dts/href.dtsi +++ b/arch/arm/boot/dts/href.dtsi @@ -221,7 +221,7 @@ }; }; - ab8500@5 { + ab8500 { ab8500-regulators { ab8500_ldo_aux1_reg: ab8500_ldo_aux1 { regulator-name = "V-DISPLAY"; diff --git a/arch/arm/boot/dts/hrefv60plus.dts b/arch/arm/boot/dts/hrefv60plus.dts index 55f4191a626e..2b587a74b813 100644 --- a/arch/arm/boot/dts/hrefv60plus.dts +++ b/arch/arm/boot/dts/hrefv60plus.dts @@ -158,7 +158,7 @@ }; }; - ab8500@5 { + ab8500 { ab8500-regulators { ab8500_ldo_aux1_reg: ab8500_ldo_aux1 { regulator-name = "V-DISPLAY"; diff --git a/arch/arm/boot/dts/imx53-mba53.dts b/arch/arm/boot/dts/imx53-mba53.dts index e54fffd48369..468c0a1d48d9 100644 --- a/arch/arm/boot/dts/imx53-mba53.dts +++ b/arch/arm/boot/dts/imx53-mba53.dts @@ -42,10 +42,9 @@ fsl,pins = <689 0x10000 /* DISP1_DRDY */ 482 0x10000 /* DISP1_HSYNC */ 489 0x10000 /* DISP1_VSYNC */ - 684 0x10000 /* DISP1_DAT_0 */ 515 0x10000 /* DISP1_DAT_22 */ 523 0x10000 /* DISP1_DAT_23 */ - 543 0x10000 /* DISP1_DAT_21 */ + 545 0x10000 /* DISP1_DAT_21 */ 553 0x10000 /* DISP1_DAT_20 */ 558 0x10000 /* DISP1_DAT_19 */ 564 0x10000 /* DISP1_DAT_18 */ diff --git a/arch/arm/boot/dts/kirkwood-dns320.dts b/arch/arm/boot/dts/kirkwood-dns320.dts index 5bb0bf39d3b8..c9c44b2f62d7 100644 --- a/arch/arm/boot/dts/kirkwood-dns320.dts +++ b/arch/arm/boot/dts/kirkwood-dns320.dts @@ -42,12 +42,10 @@ ocp@f1000000 { serial@12000 { - clock-frequency = <166666667>; status = "okay"; }; serial@12100 { - clock-frequency = <166666667>; status = "okay"; }; }; diff --git a/arch/arm/boot/dts/kirkwood-dns325.dts b/arch/arm/boot/dts/kirkwood-dns325.dts index d430713ea9b9..e4e4930dc5cf 100644 --- a/arch/arm/boot/dts/kirkwood-dns325.dts +++ b/arch/arm/boot/dts/kirkwood-dns325.dts @@ -50,7 +50,6 @@ }; }; serial@12000 { - clock-frequency = <200000000>; status = "okay"; }; }; diff --git a/arch/arm/boot/dts/kirkwood-dockstar.dts b/arch/arm/boot/dts/kirkwood-dockstar.dts index 2e3dd34e21a5..0196cf6b0ef2 100644 --- a/arch/arm/boot/dts/kirkwood-dockstar.dts +++ b/arch/arm/boot/dts/kirkwood-dockstar.dts @@ -37,7 +37,6 @@ }; }; serial@12000 { - clock-frequency = <200000000>; status = "ok"; }; diff --git a/arch/arm/boot/dts/kirkwood-dreamplug.dts b/arch/arm/boot/dts/kirkwood-dreamplug.dts index ef2d8c705709..289e51d86372 100644 --- a/arch/arm/boot/dts/kirkwood-dreamplug.dts +++ b/arch/arm/boot/dts/kirkwood-dreamplug.dts @@ -38,7 +38,6 @@ }; }; serial@12000 { - clock-frequency = <200000000>; status = "ok"; }; diff --git a/arch/arm/boot/dts/kirkwood-goflexnet.dts b/arch/arm/boot/dts/kirkwood-goflexnet.dts index 1b133e0c566e..bd83b8fc7c83 100644 --- a/arch/arm/boot/dts/kirkwood-goflexnet.dts +++ b/arch/arm/boot/dts/kirkwood-goflexnet.dts @@ -73,7 +73,6 @@ }; }; serial@12000 { - clock-frequency = <200000000>; status = "ok"; }; diff --git a/arch/arm/boot/dts/kirkwood-ib62x0.dts b/arch/arm/boot/dts/kirkwood-ib62x0.dts index 71902da33d63..5335b1aa8601 100644 --- a/arch/arm/boot/dts/kirkwood-ib62x0.dts +++ b/arch/arm/boot/dts/kirkwood-ib62x0.dts @@ -51,7 +51,6 @@ }; }; serial@12000 { - clock-frequency = <200000000>; status = "okay"; }; diff --git a/arch/arm/boot/dts/kirkwood-iconnect.dts b/arch/arm/boot/dts/kirkwood-iconnect.dts index 504f16be8b54..12ccf74ac3c4 100644 --- a/arch/arm/boot/dts/kirkwood-iconnect.dts +++ b/arch/arm/boot/dts/kirkwood-iconnect.dts @@ -78,7 +78,6 @@ }; }; serial@12000 { - clock-frequency = <200000000>; status = "ok"; }; diff --git a/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts b/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts index 6cae4599c4b3..93c3afbef9ee 100644 --- a/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts +++ b/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts @@ -115,7 +115,6 @@ }; serial@12000 { - clock-frequency = <200000000>; status = "ok"; }; diff --git a/arch/arm/boot/dts/kirkwood-km_kirkwood.dts b/arch/arm/boot/dts/kirkwood-km_kirkwood.dts index 8db3123ac80f..5bbd0542cdd3 100644 --- a/arch/arm/boot/dts/kirkwood-km_kirkwood.dts +++ b/arch/arm/boot/dts/kirkwood-km_kirkwood.dts @@ -34,7 +34,6 @@ }; serial@12000 { - clock-frequency = <200000000>; status = "ok"; }; diff --git a/arch/arm/boot/dts/kirkwood-lschlv2.dts b/arch/arm/boot/dts/kirkwood-lschlv2.dts index 9510c9ea666c..9f55d95f35f5 100644 --- a/arch/arm/boot/dts/kirkwood-lschlv2.dts +++ b/arch/arm/boot/dts/kirkwood-lschlv2.dts @@ -13,7 +13,6 @@ ocp@f1000000 { serial@12000 { - clock-frequency = <166666667>; status = "okay"; }; }; diff --git a/arch/arm/boot/dts/kirkwood-lsxhl.dts b/arch/arm/boot/dts/kirkwood-lsxhl.dts index 739019c4cba9..5c84c118ed8d 100644 --- a/arch/arm/boot/dts/kirkwood-lsxhl.dts +++ b/arch/arm/boot/dts/kirkwood-lsxhl.dts @@ -13,7 +13,6 @@ ocp@f1000000 { serial@12000 { - clock-frequency = <200000000>; status = "okay"; }; }; diff --git a/arch/arm/boot/dts/kirkwood-mplcec4.dts b/arch/arm/boot/dts/kirkwood-mplcec4.dts index 662dfd81b1ce..758824118a9a 100644 --- a/arch/arm/boot/dts/kirkwood-mplcec4.dts +++ b/arch/arm/boot/dts/kirkwood-mplcec4.dts @@ -90,7 +90,6 @@ }; serial@12000 { - clock-frequency = <200000000>; status = "ok"; }; diff --git a/arch/arm/boot/dts/kirkwood-ns2-common.dtsi b/arch/arm/boot/dts/kirkwood-ns2-common.dtsi index e8e7ecef1650..6affd924fe11 100644 --- a/arch/arm/boot/dts/kirkwood-ns2-common.dtsi +++ b/arch/arm/boot/dts/kirkwood-ns2-common.dtsi @@ -23,7 +23,6 @@ }; serial@12000 { - clock-frequency = <166666667>; status = "okay"; }; diff --git a/arch/arm/boot/dts/kirkwood-nsa310.dts b/arch/arm/boot/dts/kirkwood-nsa310.dts index 3a178cf708d7..a7412b937a8a 100644 --- a/arch/arm/boot/dts/kirkwood-nsa310.dts +++ b/arch/arm/boot/dts/kirkwood-nsa310.dts @@ -117,7 +117,6 @@ }; serial@12000 { - clock-frequency = <200000000>; status = "ok"; }; diff --git a/arch/arm/boot/dts/kirkwood-openblocks_a6.dts b/arch/arm/boot/dts/kirkwood-openblocks_a6.dts index ede7fe0d7a87..d27f7245f8e7 100644 --- a/arch/arm/boot/dts/kirkwood-openblocks_a6.dts +++ b/arch/arm/boot/dts/kirkwood-openblocks_a6.dts @@ -18,12 +18,10 @@ ocp@f1000000 { serial@12000 { - clock-frequency = <200000000>; status = "ok"; }; serial@12100 { - clock-frequency = <200000000>; status = "ok"; }; diff --git a/arch/arm/boot/dts/kirkwood-topkick.dts b/arch/arm/boot/dts/kirkwood-topkick.dts index 842ff95d60df..66eb45b00b25 100644 --- a/arch/arm/boot/dts/kirkwood-topkick.dts +++ b/arch/arm/boot/dts/kirkwood-topkick.dts @@ -108,7 +108,6 @@ }; serial@12000 { - clock-frequency = <200000000>; status = "ok"; }; diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi index 2c738d9dc82a..fada7e6d24d8 100644 --- a/arch/arm/boot/dts/kirkwood.dtsi +++ b/arch/arm/boot/dts/kirkwood.dtsi @@ -38,6 +38,7 @@ interrupt-controller; #interrupt-cells = <2>; interrupts = <35>, <36>, <37>, <38>; + clocks = <&gate_clk 7>; }; gpio1: gpio@10140 { @@ -49,6 +50,7 @@ interrupt-controller; #interrupt-cells = <2>; interrupts = <39>, <40>, <41>; + clocks = <&gate_clk 7>; }; serial@12000 { @@ -57,7 +59,6 @@ reg-shift = <2>; interrupts = <33>; clocks = <&gate_clk 7>; - /* set clock-frequency in board dts */ status = "disabled"; }; @@ -67,7 +68,6 @@ reg-shift = <2>; interrupts = <34>; clocks = <&gate_clk 7>; - /* set clock-frequency in board dts */ status = "disabled"; }; @@ -75,6 +75,7 @@ compatible = "marvell,kirkwood-rtc", "marvell,orion-rtc"; reg = <0x10300 0x20>; interrupts = <53>; + clocks = <&gate_clk 7>; }; spi@10600 { diff --git a/arch/arm/boot/dts/orion5x-lacie-ethernet-disk-mini-v2.dts b/arch/arm/boot/dts/orion5x-lacie-ethernet-disk-mini-v2.dts index 5a3a58b7e18f..0077fc8510b7 100644 --- a/arch/arm/boot/dts/orion5x-lacie-ethernet-disk-mini-v2.dts +++ b/arch/arm/boot/dts/orion5x-lacie-ethernet-disk-mini-v2.dts @@ -11,7 +11,7 @@ / { model = "LaCie Ethernet Disk mini V2"; - compatible = "lacie,ethernet-disk-mini-v2", "marvell-orion5x-88f5182", "marvell,orion5x"; + compatible = "lacie,ethernet-disk-mini-v2", "marvell,orion5x-88f5182", "marvell,orion5x"; memory { reg = <0x00000000 0x4000000>; /* 64 MB */ diff --git a/arch/arm/boot/dts/snowball.dts b/arch/arm/boot/dts/snowball.dts index 27f31a5fa494..d3ec32f6b790 100644 --- a/arch/arm/boot/dts/snowball.dts +++ b/arch/arm/boot/dts/snowball.dts @@ -298,7 +298,7 @@ }; }; - ab8500@5 { + ab8500 { ab8500-regulators { ab8500_ldo_aux1_reg: ab8500_ldo_aux1 { regulator-name = "V-DISPLAY"; diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi index 936d2306e7e1..7e8769bd5977 100644 --- a/arch/arm/boot/dts/socfpga.dtsi +++ b/arch/arm/boot/dts/socfpga.dtsi @@ -75,6 +75,9 @@ compatible = "arm,pl330", "arm,primecell"; reg = <0xffe01000 0x1000>; interrupts = <0 180 4>; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <32>; }; }; diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi index 9a428931d042..48d00a099ce3 100644 --- a/arch/arm/boot/dts/tegra20.dtsi +++ b/arch/arm/boot/dts/tegra20.dtsi @@ -118,6 +118,7 @@ compatible = "arm,cortex-a9-twd-timer"; reg = <0x50040600 0x20>; interrupts = <1 13 0x304>; + clocks = <&tegra_car 132>; }; intc: interrupt-controller { diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi index 767803e1fd55..9d87a3ffe998 100644 --- a/arch/arm/boot/dts/tegra30.dtsi +++ b/arch/arm/boot/dts/tegra30.dtsi @@ -119,6 +119,7 @@ compatible = "arm,cortex-a9-twd-timer"; reg = <0x50040600 0x20>; interrupts = <1 13 0xf04>; + clocks = <&tegra_car 214>; }; intc: interrupt-controller { diff --git a/arch/arm/configs/mxs_defconfig b/arch/arm/configs/mxs_defconfig index fbbc5bb022d5..6a99e30f81d2 100644 --- a/arch/arm/configs/mxs_defconfig +++ b/arch/arm/configs/mxs_defconfig @@ -116,6 +116,7 @@ CONFIG_SND_SOC=y CONFIG_SND_MXS_SOC=y CONFIG_SND_SOC_MXS_SGTL5000=y CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y CONFIG_USB_CHIPIDEA=y CONFIG_USB_CHIPIDEA_HOST=y CONFIG_USB_STORAGE=y diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig index b16bae2c9a60..bd07864f14a0 100644 --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig @@ -126,6 +126,8 @@ CONFIG_INPUT_MISC=y CONFIG_INPUT_TWL4030_PWRBUTTON=y CONFIG_VT_HW_CONSOLE_BINDING=y # CONFIG_LEGACY_PTYS is not set +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_NR_UARTS=32 CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_MANY_PORTS=y diff --git a/arch/arm/include/asm/xen/events.h b/arch/arm/include/asm/xen/events.h index 5c27696de14f..8b1f37bfeeec 100644 --- a/arch/arm/include/asm/xen/events.h +++ b/arch/arm/include/asm/xen/events.h @@ -2,6 +2,7 @@ #define _ASM_ARM_XEN_EVENTS_H #include <asm/ptrace.h> +#include <asm/atomic.h> enum ipi_vector { XEN_PLACEHOLDER_VECTOR, @@ -15,26 +16,8 @@ static inline int xen_irqs_disabled(struct pt_regs *regs) return raw_irqs_disabled_flags(regs->ARM_cpsr); } -/* - * We cannot use xchg because it does not support 8-byte - * values. However it is safe to use {ldr,dtd}exd directly because all - * platforms which Xen can run on support those instructions. - */ -static inline xen_ulong_t xchg_xen_ulong(xen_ulong_t *ptr, xen_ulong_t val) -{ - xen_ulong_t oldval; - unsigned int tmp; - - wmb(); - asm volatile("@ xchg_xen_ulong\n" - "1: ldrexd %0, %H0, [%3]\n" - " strexd %1, %2, %H2, [%3]\n" - " teq %1, #0\n" - " bne 1b" - : "=&r" (oldval), "=&r" (tmp) - : "r" (val), "r" (ptr) - : "memory", "cc"); - return oldval; -} +#define xchg_xen_ulong(ptr, val) atomic64_xchg(container_of((ptr), \ + atomic64_t, \ + counter), (val)) #endif /* _ASM_ARM_XEN_EVENTS_H */ diff --git a/arch/arm/mach-at91/board-foxg20.c b/arch/arm/mach-at91/board-foxg20.c index 2ea7059b840b..c20a870ea9c9 100644 --- a/arch/arm/mach-at91/board-foxg20.c +++ b/arch/arm/mach-at91/board-foxg20.c @@ -176,6 +176,7 @@ static struct w1_gpio_platform_data w1_gpio_pdata = { /* If you choose to use a pin other than PB16 it needs to be 3.3V */ .pin = AT91_PIN_PB16, .is_open_drain = 1, + .ext_pullup_enable_pin = -EINVAL, }; static struct platform_device w1_device = { diff --git a/arch/arm/mach-at91/board-stamp9g20.c b/arch/arm/mach-at91/board-stamp9g20.c index a033b8df9fb2..869cbecf00b7 100644 --- a/arch/arm/mach-at91/board-stamp9g20.c +++ b/arch/arm/mach-at91/board-stamp9g20.c @@ -188,6 +188,7 @@ static struct spi_board_info portuxg20_spi_devices[] = { static struct w1_gpio_platform_data w1_gpio_pdata = { .pin = AT91_PIN_PA29, .is_open_drain = 1, + .ext_pullup_enable_pin = -EINVAL, }; static struct platform_device w1_device = { diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c index 7b025ee528a5..2f9ff93a4e61 100644 --- a/arch/arm/mach-imx/clk-imx6q.c +++ b/arch/arm/mach-imx/clk-imx6q.c @@ -172,7 +172,7 @@ static struct clk *clk[clk_max]; static struct clk_onecell_data clk_data; static enum mx6q_clks const clks_init_on[] __initconst = { - mmdc_ch0_axi, rom, + mmdc_ch0_axi, rom, pll1_sys, }; static struct clk_div_table clk_enet_ref_table[] = { diff --git a/arch/arm/mach-imx/headsmp.S b/arch/arm/mach-imx/headsmp.S index 921fc1555854..a58c8b0527cc 100644 --- a/arch/arm/mach-imx/headsmp.S +++ b/arch/arm/mach-imx/headsmp.S @@ -26,16 +26,16 @@ ENDPROC(v7_secondary_startup) #ifdef CONFIG_PM /* - * The following code is located into the .data section. This is to - * allow phys_l2x0_saved_regs to be accessed with a relative load - * as we are running on physical address here. + * The following code must assume it is running from physical address + * where absolute virtual addresses to the data section have to be + * turned into relative ones. */ - .data - .align #ifdef CONFIG_CACHE_L2X0 .macro pl310_resume - ldr r2, phys_l2x0_saved_regs + adr r0, l2x0_saved_regs_offset + ldr r2, [r0] + add r2, r2, r0 ldr r0, [r2, #L2X0_R_PHY_BASE] @ get physical base of l2x0 ldr r1, [r2, #L2X0_R_AUX_CTRL] @ get aux_ctrl value str r1, [r0, #L2X0_AUX_CTRL] @ restore aux_ctrl @@ -43,9 +43,9 @@ ENDPROC(v7_secondary_startup) str r1, [r0, #L2X0_CTRL] @ re-enable L2 .endm - .globl phys_l2x0_saved_regs -phys_l2x0_saved_regs: - .long 0 +l2x0_saved_regs_offset: + .word l2x0_saved_regs - . + #else .macro pl310_resume .endm diff --git a/arch/arm/mach-imx/pm-imx6q.c b/arch/arm/mach-imx/pm-imx6q.c index ee42d20cba19..5faba7a3c95f 100644 --- a/arch/arm/mach-imx/pm-imx6q.c +++ b/arch/arm/mach-imx/pm-imx6q.c @@ -22,8 +22,6 @@ #include "common.h" #include "hardware.h" -extern unsigned long phys_l2x0_saved_regs; - static int imx6q_suspend_finish(unsigned long val) { cpu_do_idle(); @@ -57,18 +55,5 @@ static const struct platform_suspend_ops imx6q_pm_ops = { void __init imx6q_pm_init(void) { - /* - * The l2x0 core code provides an infrastucture to save and restore - * l2x0 registers across suspend/resume cycle. But because imx6q - * retains L2 content during suspend and needs to resume L2 before - * MMU is enabled, it can only utilize register saving support and - * have to take care of restoring on its own. So we save physical - * address of the data structure used by l2x0 core to save registers, - * and later restore the necessary ones in imx6q resume entry. - */ -#ifdef CONFIG_CACHE_L2X0 - phys_l2x0_saved_regs = __pa(&l2x0_saved_regs); -#endif - suspend_set_ops(&imx6q_pm_ops); } diff --git a/arch/arm/mach-ixp4xx/vulcan-setup.c b/arch/arm/mach-ixp4xx/vulcan-setup.c index d42730a1d4ab..d599e354ca57 100644 --- a/arch/arm/mach-ixp4xx/vulcan-setup.c +++ b/arch/arm/mach-ixp4xx/vulcan-setup.c @@ -163,6 +163,7 @@ static struct platform_device vulcan_max6369 = { static struct w1_gpio_platform_data vulcan_w1_gpio_pdata = { .pin = 14, + .ext_pullup_enable_pin = -EINVAL, }; static struct platform_device vulcan_w1_gpio = { diff --git a/arch/arm/mach-kirkwood/board-dt.c b/arch/arm/mach-kirkwood/board-dt.c index 2e73e9d53f70..d367aa6b47bb 100644 --- a/arch/arm/mach-kirkwood/board-dt.c +++ b/arch/arm/mach-kirkwood/board-dt.c @@ -41,16 +41,12 @@ static void __init kirkwood_legacy_clk_init(void) struct device_node *np = of_find_compatible_node( NULL, NULL, "marvell,kirkwood-gating-clock"); - struct of_phandle_args clkspec; + struct clk *clk; clkspec.np = np; clkspec.args_count = 1; - clkspec.args[0] = CGC_BIT_GE0; - orion_clkdev_add(NULL, "mv643xx_eth_port.0", - of_clk_get_from_provider(&clkspec)); - clkspec.args[0] = CGC_BIT_PEX0; orion_clkdev_add("0", "pcie", of_clk_get_from_provider(&clkspec)); @@ -59,9 +55,24 @@ static void __init kirkwood_legacy_clk_init(void) orion_clkdev_add("1", "pcie", of_clk_get_from_provider(&clkspec)); - clkspec.args[0] = CGC_BIT_GE1; - orion_clkdev_add(NULL, "mv643xx_eth_port.1", + clkspec.args[0] = CGC_BIT_SDIO; + orion_clkdev_add(NULL, "mvsdio", of_clk_get_from_provider(&clkspec)); + + /* + * The ethernet interfaces forget the MAC address assigned by + * u-boot if the clocks are turned off. Until proper DT support + * is available we always enable them for now. + */ + clkspec.args[0] = CGC_BIT_GE0; + clk = of_clk_get_from_provider(&clkspec); + orion_clkdev_add(NULL, "mv643xx_eth_port.0", clk); + clk_prepare_enable(clk); + + clkspec.args[0] = CGC_BIT_GE1; + clk = of_clk_get_from_provider(&clkspec); + orion_clkdev_add(NULL, "mv643xx_eth_port.1", clk); + clk_prepare_enable(clk); } static void __init kirkwood_of_clk_init(void) diff --git a/arch/arm/mach-mxs/icoll.c b/arch/arm/mach-mxs/icoll.c index 8fb23af154b3..e26eeba46598 100644 --- a/arch/arm/mach-mxs/icoll.c +++ b/arch/arm/mach-mxs/icoll.c @@ -100,7 +100,7 @@ static struct irq_domain_ops icoll_irq_domain_ops = { .xlate = irq_domain_xlate_onecell, }; -void __init icoll_of_init(struct device_node *np, +static void __init icoll_of_init(struct device_node *np, struct device_node *interrupt_parent) { /* diff --git a/arch/arm/mach-mxs/mach-mxs.c b/arch/arm/mach-mxs/mach-mxs.c index 052186713347..3218f1f2c0e0 100644 --- a/arch/arm/mach-mxs/mach-mxs.c +++ b/arch/arm/mach-mxs/mach-mxs.c @@ -402,17 +402,17 @@ static void __init cfa10049_init(void) { enable_clk_enet_out(); update_fec_mac_prop(OUI_CRYSTALFONTZ); + + mxsfb_pdata.mode_list = cfa10049_video_modes; + mxsfb_pdata.mode_count = ARRAY_SIZE(cfa10049_video_modes); + mxsfb_pdata.default_bpp = 32; + mxsfb_pdata.ld_intf_width = STMLCDIF_18BIT; } static void __init cfa10037_init(void) { enable_clk_enet_out(); update_fec_mac_prop(OUI_CRYSTALFONTZ); - - mxsfb_pdata.mode_list = cfa10049_video_modes; - mxsfb_pdata.mode_count = ARRAY_SIZE(cfa10049_video_modes); - mxsfb_pdata.default_bpp = 32; - mxsfb_pdata.ld_intf_width = STMLCDIF_18BIT; } static void __init apf28_init(void) diff --git a/arch/arm/mach-mxs/mm.c b/arch/arm/mach-mxs/mm.c index a4294aa9f301..e63b7d87acbd 100644 --- a/arch/arm/mach-mxs/mm.c +++ b/arch/arm/mach-mxs/mm.c @@ -18,6 +18,7 @@ #include <mach/mx23.h> #include <mach/mx28.h> +#include <mach/common.h> /* * Define the MX23 memory map. diff --git a/arch/arm/mach-mxs/ocotp.c b/arch/arm/mach-mxs/ocotp.c index 54add60f94c9..1dff46703753 100644 --- a/arch/arm/mach-mxs/ocotp.c +++ b/arch/arm/mach-mxs/ocotp.c @@ -19,6 +19,7 @@ #include <asm/processor.h> /* for cpu_relax() */ #include <mach/mxs.h> +#include <mach/common.h> #define OCOTP_WORD_OFFSET 0x20 #define OCOTP_WORD_COUNT 0x20 diff --git a/arch/arm/mach-omap1/common.h b/arch/arm/mach-omap1/common.h index fb18831e88aa..14f7e9920479 100644 --- a/arch/arm/mach-omap1/common.h +++ b/arch/arm/mach-omap1/common.h @@ -31,6 +31,8 @@ #include <plat/i2c.h> +#include <mach/irqs.h> + #if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) void omap7xx_map_io(void); #else diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 49ac3dfebef9..8111cd9ff3e5 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -311,9 +311,6 @@ config MACH_OMAP_ZOOM2 default y select OMAP_PACKAGE_CBB select REGULATOR_FIXED_VOLTAGE if REGULATOR - select SERIAL_8250 - select SERIAL_8250_CONSOLE - select SERIAL_CORE_CONSOLE config MACH_OMAP_ZOOM3 bool "OMAP3630 Zoom3 board" @@ -321,9 +318,6 @@ config MACH_OMAP_ZOOM3 default y select OMAP_PACKAGE_CBP select REGULATOR_FIXED_VOLTAGE if REGULATOR - select SERIAL_8250 - select SERIAL_8250_CONSOLE - select SERIAL_CORE_CONSOLE config MACH_CM_T35 bool "CompuLab CM-T35/CM-T3730 modules" diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c index 0274ff7a2a2b..e54a48060198 100644 --- a/arch/arm/mach-omap2/board-generic.c +++ b/arch/arm/mach-omap2/board-generic.c @@ -102,6 +102,7 @@ DT_MACHINE_START(OMAP3_DT, "Generic OMAP3 (Flattened Device Tree)") .init_irq = omap_intc_of_init, .handle_irq = omap3_intc_handle_irq, .init_machine = omap_generic_init, + .init_late = omap3_init_late, .init_time = omap3_sync32k_timer_init, .dt_compat = omap3_boards_compat, .restart = omap3xxx_restart, @@ -119,6 +120,7 @@ DT_MACHINE_START(OMAP3_GP_DT, "Generic OMAP3-GP (Flattened Device Tree)") .init_irq = omap_intc_of_init, .handle_irq = omap3_intc_handle_irq, .init_machine = omap_generic_init, + .init_late = omap3_init_late, .init_time = omap3_secure_sync32k_timer_init, .dt_compat = omap3_gp_boards_compat, .restart = omap3xxx_restart, diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c index f7c4616cbb60..d2ea68ea678a 100644 --- a/arch/arm/mach-omap2/board-rx51.c +++ b/arch/arm/mach-omap2/board-rx51.c @@ -17,6 +17,7 @@ #include <linux/io.h> #include <linux/gpio.h> #include <linux/leds.h> +#include <linux/usb/phy.h> #include <linux/usb/musb.h> #include <linux/platform_data/spi-omap2-mcspi.h> @@ -98,6 +99,7 @@ static void __init rx51_init(void) sdrc_params = nokia_get_sdram_timings(); omap_sdrc_init(sdrc_params, sdrc_params); + usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb"); usb_musb_init(&musb_board_data); rx51_peripherals_init(); diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h index 0a6b9c7a63da..40f4a03d728f 100644 --- a/arch/arm/mach-omap2/common.h +++ b/arch/arm/mach-omap2/common.h @@ -108,7 +108,6 @@ void omap35xx_init_late(void); void omap3630_init_late(void); void am35xx_init_late(void); void ti81xx_init_late(void); -void omap4430_init_late(void); int omap2_common_pm_late_init(void); #if defined(CONFIG_SOC_OMAP2420) || defined(CONFIG_SOC_OMAP2430) diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c index e4b16c8efe8b..410e1bac7815 100644 --- a/arch/arm/mach-omap2/gpmc.c +++ b/arch/arm/mach-omap2/gpmc.c @@ -1122,9 +1122,6 @@ int gpmc_calc_timings(struct gpmc_timings *gpmc_t, /* TODO: remove, see function definition */ gpmc_convert_ps_to_ns(gpmc_t); - /* Now the GPMC is initialised, unreserve the chip-selects */ - gpmc_cs_map = 0; - return 0; } @@ -1383,6 +1380,9 @@ static int gpmc_probe(struct platform_device *pdev) if (IS_ERR_VALUE(gpmc_setup_irq())) dev_warn(gpmc_dev, "gpmc_setup_irq failed\n"); + /* Now the GPMC is initialised, unreserve the chip-selects */ + gpmc_cs_map = 0; + rc = gpmc_probe_dt(pdev); if (rc < 0) { clk_disable_unprepare(gpmc_l3_clk); diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c index 6a217c98db54..f82cf878d6af 100644 --- a/arch/arm/mach-omap2/mux.c +++ b/arch/arm/mach-omap2/mux.c @@ -211,8 +211,6 @@ static int __init _omap_mux_get_by_name(struct omap_mux_partition *partition, return -EINVAL; } - pr_err("%s: Could not find signal %s\n", __func__, muxname); - return -ENODEV; } @@ -234,6 +232,8 @@ int __init omap_mux_get_by_name(const char *muxname, return mux_mode; } + pr_err("%s: Could not find signal %s\n", __func__, muxname); + return -ENODEV; } @@ -739,8 +739,9 @@ static void __init omap_mux_dbg_create_entry( list_for_each_entry(e, &partition->muxmodes, node) { struct omap_mux *m = &e->mux; - (void)debugfs_create_file(m->muxnames[0], S_IWUSR, mux_dbg_dir, - m, &omap_mux_dbg_signal_fops); + (void)debugfs_create_file(m->muxnames[0], S_IWUSR | S_IRUGO, + mux_dbg_dir, m, + &omap_mux_dbg_signal_fops); } } diff --git a/arch/arm/mach-pxa/raumfeld.c b/arch/arm/mach-pxa/raumfeld.c index af41888acbd6..969b0ba7fa70 100644 --- a/arch/arm/mach-pxa/raumfeld.c +++ b/arch/arm/mach-pxa/raumfeld.c @@ -505,6 +505,7 @@ static struct w1_gpio_platform_data w1_gpio_platform_data = { .pin = GPIO_ONE_WIRE, .is_open_drain = 0, .enable_external_pullup = w1_enable_external_pullup, + .ext_pullup_enable_pin = -EINVAL, }; struct platform_device raumfeld_w1_gpio_device = { diff --git a/arch/arm/mach-spear3xx/spear3xx.c b/arch/arm/mach-spear3xx/spear3xx.c index f9d754f90c59..d2b3937c4014 100644 --- a/arch/arm/mach-spear3xx/spear3xx.c +++ b/arch/arm/mach-spear3xx/spear3xx.c @@ -14,7 +14,7 @@ #define pr_fmt(fmt) "SPEAr3xx: " fmt #include <linux/amba/pl022.h> -#include <linux/amba/pl08x.h> +#include <linux/amba/pl080.h> #include <linux/io.h> #include <plat/pl080.h> #include <mach/generic.h> diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index c7e3759f16d3..e9db6b4bf65a 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -342,6 +342,7 @@ static int __init atomic_pool_init(void) { struct dma_pool *pool = &atomic_pool; pgprot_t prot = pgprot_dmacoherent(pgprot_kernel); + gfp_t gfp = GFP_KERNEL | GFP_DMA; unsigned long nr_pages = pool->size >> PAGE_SHIFT; unsigned long *bitmap; struct page *page; @@ -361,8 +362,8 @@ static int __init atomic_pool_init(void) ptr = __alloc_from_contiguous(NULL, pool->size, prot, &page, atomic_pool_init); else - ptr = __alloc_remap_buffer(NULL, pool->size, GFP_KERNEL, prot, - &page, atomic_pool_init); + ptr = __alloc_remap_buffer(NULL, pool->size, gfp, prot, &page, + atomic_pool_init); if (ptr) { int i; diff --git a/arch/arm/plat-orion/addr-map.c b/arch/arm/plat-orion/addr-map.c index febe3862873c..807ac8e5cbc0 100644 --- a/arch/arm/plat-orion/addr-map.c +++ b/arch/arm/plat-orion/addr-map.c @@ -157,9 +157,12 @@ void __init orion_setup_cpu_mbus_target(const struct orion_addr_map_cfg *cfg, u32 size = readl(ddr_window_cpu_base + DDR_SIZE_CS_OFF(i)); /* - * Chip select enabled? + * We only take care of entries for which the chip + * select is enabled, and that don't have high base + * address bits set (devices can only access the first + * 32 bits of the memory). */ - if (size & 1) { + if ((size & 1) && !(base & 0xF)) { struct mbus_dram_window *w; w = &orion_mbus_dram_info.cs[cs++]; diff --git a/arch/arm/plat-spear/Kconfig b/arch/arm/plat-spear/Kconfig index 739d016eb273..8a08c31b5e20 100644 --- a/arch/arm/plat-spear/Kconfig +++ b/arch/arm/plat-spear/Kconfig @@ -10,7 +10,7 @@ choice config ARCH_SPEAR13XX bool "ST SPEAr13xx with Device Tree" - select ARCH_HAVE_CPUFREQ + select ARCH_HAS_CPUFREQ select ARM_GIC select CPU_V7 select GPIO_SPEAR_SPICS diff --git a/arch/avr32/Kconfig b/arch/avr32/Kconfig index 9b89257b2cfd..c1a868d398bd 100644 --- a/arch/avr32/Kconfig +++ b/arch/avr32/Kconfig @@ -7,7 +7,7 @@ config AVR32 select HAVE_OPROFILE select HAVE_KPROBES select HAVE_GENERIC_HARDIRQS - select HAVE_VIRT_TO_BUS + select VIRT_TO_BUS select GENERIC_IRQ_PROBE select GENERIC_ATOMIC64 select HARDIRQS_SW_RESEND diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig index 600494c70e96..c3f2e0bc644a 100644 --- a/arch/blackfin/Kconfig +++ b/arch/blackfin/Kconfig @@ -33,7 +33,7 @@ config BLACKFIN select ARCH_HAVE_CUSTOM_GPIO_H select ARCH_WANT_OPTIONAL_GPIOLIB select HAVE_UID16 - select HAVE_VIRT_TO_BUS + select VIRT_TO_BUS select ARCH_WANT_IPC_PARSE_VERSION select HAVE_GENERIC_HARDIRQS select GENERIC_ATOMIC64 diff --git a/arch/cris/Kconfig b/arch/cris/Kconfig index bb0ac66cf533..06dd026533e3 100644 --- a/arch/cris/Kconfig +++ b/arch/cris/Kconfig @@ -43,7 +43,7 @@ config CRIS select GENERIC_ATOMIC64 select HAVE_GENERIC_HARDIRQS select HAVE_UID16 - select HAVE_VIRT_TO_BUS + select VIRT_TO_BUS select ARCH_WANT_IPC_PARSE_VERSION select GENERIC_IRQ_SHOW select GENERIC_IOMAP diff --git a/arch/frv/Kconfig b/arch/frv/Kconfig index 12369b194c7b..2ce731f9aa4d 100644 --- a/arch/frv/Kconfig +++ b/arch/frv/Kconfig @@ -6,7 +6,7 @@ config FRV select HAVE_PERF_EVENTS select HAVE_UID16 select HAVE_GENERIC_HARDIRQS - select HAVE_VIRT_TO_BUS + select VIRT_TO_BUS select GENERIC_IRQ_SHOW select HAVE_DEBUG_BUGVERBOSE select ARCH_HAVE_NMI_SAFE_CMPXCHG diff --git a/arch/h8300/Kconfig b/arch/h8300/Kconfig index ae8551eb3736..79250de1b12a 100644 --- a/arch/h8300/Kconfig +++ b/arch/h8300/Kconfig @@ -5,7 +5,7 @@ config H8300 select HAVE_GENERIC_HARDIRQS select GENERIC_ATOMIC64 select HAVE_UID16 - select HAVE_VIRT_TO_BUS + select VIRT_TO_BUS select ARCH_WANT_IPC_PARSE_VERSION select GENERIC_IRQ_SHOW select GENERIC_CPU_DEVICES diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig index 33f3fdc0b214..9a02f71c6b1f 100644 --- a/arch/ia64/Kconfig +++ b/arch/ia64/Kconfig @@ -26,7 +26,7 @@ config IA64 select HAVE_MEMBLOCK select HAVE_MEMBLOCK_NODE_MAP select HAVE_VIRT_CPU_ACCOUNTING - select HAVE_VIRT_TO_BUS + select VIRT_TO_BUS select ARCH_DISCARD_MEMBLOCK select GENERIC_IRQ_PROBE select GENERIC_PENDING_IRQ if SMP diff --git a/arch/m32r/Kconfig b/arch/m32r/Kconfig index 92623818a1fe..bcd17b206571 100644 --- a/arch/m32r/Kconfig +++ b/arch/m32r/Kconfig @@ -10,7 +10,7 @@ config M32R select ARCH_WANT_IPC_PARSE_VERSION select HAVE_DEBUG_BUGVERBOSE select HAVE_GENERIC_HARDIRQS - select HAVE_VIRT_TO_BUS + select VIRT_TO_BUS select GENERIC_IRQ_PROBE select GENERIC_IRQ_SHOW select GENERIC_ATOMIC64 diff --git a/arch/m32r/include/uapi/asm/stat.h b/arch/m32r/include/uapi/asm/stat.h index da4518f82d6d..98470fe483b6 100644 --- a/arch/m32r/include/uapi/asm/stat.h +++ b/arch/m32r/include/uapi/asm/stat.h @@ -63,10 +63,10 @@ struct stat64 { long long st_size; unsigned long st_blksize; -#if defined(__BIG_ENDIAN) +#if defined(__BYTE_ORDER) ? __BYTE_ORDER == __BIG_ENDIAN : defined(__BIG_ENDIAN) unsigned long __pad4; /* future possible st_blocks high bits */ unsigned long st_blocks; /* Number 512-byte blocks allocated. */ -#elif defined(__LITTLE_ENDIAN) +#elif defined(__BYTE_ORDER) ? __BYTE_ORDER == __LITTLE_ENDIAN : defined(__LITTLE_ENDIAN) unsigned long st_blocks; /* Number 512-byte blocks allocated. */ unsigned long __pad4; /* future possible st_blocks high bits */ #else diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig index 0e708c78e01c..6de813370b8c 100644 --- a/arch/m68k/Kconfig +++ b/arch/m68k/Kconfig @@ -8,7 +8,7 @@ config M68K select GENERIC_IRQ_SHOW select GENERIC_ATOMIC64 select HAVE_UID16 - select HAVE_VIRT_TO_BUS + select VIRT_TO_BUS select ARCH_HAVE_NMI_SAFE_CMPXCHG if RMW_INSNS select GENERIC_CPU_DEVICES select GENERIC_STRNCPY_FROM_USER if MMU diff --git a/arch/m68k/Kconfig.machine b/arch/m68k/Kconfig.machine index 7cdf6b010381..7240584d3439 100644 --- a/arch/m68k/Kconfig.machine +++ b/arch/m68k/Kconfig.machine @@ -310,7 +310,6 @@ config COBRA5282 config SOM5282EM bool "EMAC.Inc SOM5282EM board support" depends on M528x - select EMAC_INC help Support for the EMAC.Inc SOM5282EM module. diff --git a/arch/m68k/include/asm/MC68328.h b/arch/m68k/include/asm/MC68328.h index a337e56d09bf..4ebf098b8a1f 100644 --- a/arch/m68k/include/asm/MC68328.h +++ b/arch/m68k/include/asm/MC68328.h @@ -293,7 +293,7 @@ /* * Here go the bitmasks themselves */ -#define IMR_MSPIM (1 << SPIM _IRQ_NUM) /* Mask SPI Master interrupt */ +#define IMR_MSPIM (1 << SPIM_IRQ_NUM) /* Mask SPI Master interrupt */ #define IMR_MTMR2 (1 << TMR2_IRQ_NUM) /* Mask Timer 2 interrupt */ #define IMR_MUART (1 << UART_IRQ_NUM) /* Mask UART interrupt */ #define IMR_MWDT (1 << WDT_IRQ_NUM) /* Mask Watchdog Timer interrupt */ @@ -327,7 +327,7 @@ #define IWR_ADDR 0xfffff308 #define IWR LONG_REF(IWR_ADDR) -#define IWR_SPIM (1 << SPIM _IRQ_NUM) /* SPI Master interrupt */ +#define IWR_SPIM (1 << SPIM_IRQ_NUM) /* SPI Master interrupt */ #define IWR_TMR2 (1 << TMR2_IRQ_NUM) /* Timer 2 interrupt */ #define IWR_UART (1 << UART_IRQ_NUM) /* UART interrupt */ #define IWR_WDT (1 << WDT_IRQ_NUM) /* Watchdog Timer interrupt */ @@ -357,7 +357,7 @@ #define ISR_ADDR 0xfffff30c #define ISR LONG_REF(ISR_ADDR) -#define ISR_SPIM (1 << SPIM _IRQ_NUM) /* SPI Master interrupt */ +#define ISR_SPIM (1 << SPIM_IRQ_NUM) /* SPI Master interrupt */ #define ISR_TMR2 (1 << TMR2_IRQ_NUM) /* Timer 2 interrupt */ #define ISR_UART (1 << UART_IRQ_NUM) /* UART interrupt */ #define ISR_WDT (1 << WDT_IRQ_NUM) /* Watchdog Timer interrupt */ @@ -391,7 +391,7 @@ #define IPR_ADDR 0xfffff310 #define IPR LONG_REF(IPR_ADDR) -#define IPR_SPIM (1 << SPIM _IRQ_NUM) /* SPI Master interrupt */ +#define IPR_SPIM (1 << SPIM_IRQ_NUM) /* SPI Master interrupt */ #define IPR_TMR2 (1 << TMR2_IRQ_NUM) /* Timer 2 interrupt */ #define IPR_UART (1 << UART_IRQ_NUM) /* UART interrupt */ #define IPR_WDT (1 << WDT_IRQ_NUM) /* Watchdog Timer interrupt */ @@ -757,7 +757,7 @@ /* 'EZ328-compatible definitions */ #define TCN_ADDR TCN1_ADDR -#define TCN TCN +#define TCN TCN1 /* * Timer Unit 1 and 2 Status Registers diff --git a/arch/m68k/kernel/setup_no.c b/arch/m68k/kernel/setup_no.c index 71fb29938dba..911ba472e6c4 100644 --- a/arch/m68k/kernel/setup_no.c +++ b/arch/m68k/kernel/setup_no.c @@ -57,6 +57,9 @@ void (*mach_reset)(void); void (*mach_halt)(void); void (*mach_power_off)(void); +#ifdef CONFIG_M68000 +#define CPU_NAME "MC68000" +#endif #ifdef CONFIG_M68328 #define CPU_NAME "MC68328" #endif diff --git a/arch/m68k/mm/init.c b/arch/m68k/mm/init.c index afd8106fd83b..519aad8fa812 100644 --- a/arch/m68k/mm/init.c +++ b/arch/m68k/mm/init.c @@ -188,7 +188,7 @@ void __init mem_init(void) } } -#if !defined(CONFIG_SUN3) && !defined(CONFIG_COLDFIRE) +#if defined(CONFIG_MMU) && !defined(CONFIG_SUN3) && !defined(CONFIG_COLDFIRE) /* insert pointer tables allocated so far into the tablelist */ init_pointer_table((unsigned long)kernel_pg_dir); for (i = 0; i < PTRS_PER_PGD; i++) { diff --git a/arch/m68k/platform/coldfire/m528x.c b/arch/m68k/platform/coldfire/m528x.c index 83b7dad7a84e..b03a9d271837 100644 --- a/arch/m68k/platform/coldfire/m528x.c +++ b/arch/m68k/platform/coldfire/m528x.c @@ -69,7 +69,7 @@ static void __init m528x_uarts_init(void) u8 port; /* make sure PUAPAR is set for UART0 and UART1 */ - port = readb(MCF5282_GPIO_PUAPAR); + port = readb(MCFGPIO_PUAPAR); port |= 0x03 | (0x03 << 2); writeb(port, MCFGPIO_PUAPAR); } diff --git a/arch/microblaze/Kconfig b/arch/microblaze/Kconfig index 7843d11156e6..1323fa2530eb 100644 --- a/arch/microblaze/Kconfig +++ b/arch/microblaze/Kconfig @@ -19,7 +19,7 @@ config MICROBLAZE select HAVE_DEBUG_KMEMLEAK select IRQ_DOMAIN select HAVE_GENERIC_HARDIRQS - select HAVE_VIRT_TO_BUS + select VIRT_TO_BUS select GENERIC_IRQ_PROBE select GENERIC_IRQ_SHOW select GENERIC_PCI_IOMAP diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index ae9c716c46bb..cd2e21ff562a 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -38,7 +38,7 @@ config MIPS select GENERIC_CLOCKEVENTS select GENERIC_CMOS_UPDATE select HAVE_MOD_ARCH_SPECIFIC - select HAVE_VIRT_TO_BUS + select VIRT_TO_BUS select MODULES_USE_ELF_REL if MODULES select MODULES_USE_ELF_RELA if MODULES && 64BIT select CLONE_BACKWARDS diff --git a/arch/mn10300/Kconfig b/arch/mn10300/Kconfig index b06c7360b1c6..428da175d073 100644 --- a/arch/mn10300/Kconfig +++ b/arch/mn10300/Kconfig @@ -8,7 +8,7 @@ config MN10300 select HAVE_ARCH_KGDB select GENERIC_ATOMIC64 select HAVE_NMI_WATCHDOG if MN10300_WD_TIMER - select HAVE_VIRT_TO_BUS + select VIRT_TO_BUS select GENERIC_CLOCKEVENTS select MODULES_USE_ELF_RELA select OLD_SIGSUSPEND3 diff --git a/arch/openrisc/Kconfig b/arch/openrisc/Kconfig index 014a6482ed4c..9ab3bf2eca8d 100644 --- a/arch/openrisc/Kconfig +++ b/arch/openrisc/Kconfig @@ -9,10 +9,9 @@ config OPENRISC select OF_EARLY_FLATTREE select IRQ_DOMAIN select HAVE_MEMBLOCK - select ARCH_WANT_OPTIONAL_GPIOLIB + select ARCH_REQUIRE_GPIOLIB select HAVE_ARCH_TRACEHOOK select HAVE_GENERIC_HARDIRQS - select HAVE_VIRT_TO_BUS select GENERIC_IRQ_CHIP select GENERIC_IRQ_PROBE select GENERIC_IRQ_SHOW diff --git a/arch/parisc/Kconfig b/arch/parisc/Kconfig index a9ff712a2864..0339181bf3ac 100644 --- a/arch/parisc/Kconfig +++ b/arch/parisc/Kconfig @@ -21,7 +21,7 @@ config PARISC select GENERIC_STRNCPY_FROM_USER select SYSCTL_ARCH_UNALIGN_ALLOW select HAVE_MOD_ARCH_SPECIFIC - select HAVE_VIRT_TO_BUS + select VIRT_TO_BUS select MODULES_USE_ELF_RELA select CLONE_BACKWARDS select TTY # Needed for pdc_cons.c diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index b89d7eb730a2..80821512e9cc 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -98,7 +98,7 @@ config PPC select HAVE_FUNCTION_GRAPH_TRACER select SYSCTL_EXCEPTION_TRACE select ARCH_WANT_OPTIONAL_GPIOLIB - select HAVE_VIRT_TO_BUS if !PPC64 + select VIRT_TO_BUS if !PPC64 select HAVE_IDE select HAVE_IOREMAP_PROT select HAVE_EFFICIENT_UNALIGNED_ACCESS diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig index 4b505370a1d5..eb8fb629f00b 100644 --- a/arch/s390/Kconfig +++ b/arch/s390/Kconfig @@ -134,7 +134,7 @@ config S390 select HAVE_SYSCALL_WRAPPERS select HAVE_UID16 if 32BIT select HAVE_VIRT_CPU_ACCOUNTING - select HAVE_VIRT_TO_BUS + select VIRT_TO_BUS select INIT_ALL_POSSIBLE select KTIME_SCALAR if 32BIT select MODULES_USE_ELF_RELA diff --git a/arch/s390/include/asm/cpu_mf.h b/arch/s390/include/asm/cpu_mf.h index f1eddd150dd7..c879fad404c8 100644 --- a/arch/s390/include/asm/cpu_mf.h +++ b/arch/s390/include/asm/cpu_mf.h @@ -12,6 +12,7 @@ #ifndef _ASM_S390_CPU_MF_H #define _ASM_S390_CPU_MF_H +#include <linux/errno.h> #include <asm/facility.h> #define CPU_MF_INT_SF_IAE (1 << 31) /* invalid entry address */ diff --git a/arch/score/Kconfig b/arch/score/Kconfig index e569aa1fd2ba..c8def8bc9020 100644 --- a/arch/score/Kconfig +++ b/arch/score/Kconfig @@ -12,7 +12,7 @@ config SCORE select GENERIC_CPU_DEVICES select GENERIC_CLOCKEVENTS select HAVE_MOD_ARCH_SPECIFIC - select HAVE_VIRT_TO_BUS + select VIRT_TO_BUS select MODULES_USE_ELF_REL select CLONE_BACKWARDS diff --git a/arch/tile/Kconfig b/arch/tile/Kconfig index ff496ab1e794..25877aebc685 100644 --- a/arch/tile/Kconfig +++ b/arch/tile/Kconfig @@ -17,7 +17,7 @@ config TILE select GENERIC_IRQ_SHOW select HAVE_DEBUG_BUGVERBOSE select HAVE_SYSCALL_WRAPPERS if TILEGX - select HAVE_VIRT_TO_BUS + select VIRT_TO_BUS select SYS_HYPERVISOR select ARCH_HAVE_NMI_SAFE_CMPXCHG select GENERIC_CLOCKEVENTS diff --git a/arch/um/drivers/chan.h b/arch/um/drivers/chan.h index 78f1b8999964..c512b0306dd4 100644 --- a/arch/um/drivers/chan.h +++ b/arch/um/drivers/chan.h @@ -37,7 +37,7 @@ extern int console_write_chan(struct chan *chan, const char *buf, extern int console_open_chan(struct line *line, struct console *co); extern void deactivate_chan(struct chan *chan, int irq); extern void reactivate_chan(struct chan *chan, int irq); -extern void chan_enable_winch(struct chan *chan, struct tty_struct *tty); +extern void chan_enable_winch(struct chan *chan, struct tty_port *port); extern int enable_chan(struct line *line); extern void close_chan(struct line *line); extern int chan_window_size(struct line *line, diff --git a/arch/um/drivers/chan_kern.c b/arch/um/drivers/chan_kern.c index bf42825ba54f..acbe6c67afba 100644 --- a/arch/um/drivers/chan_kern.c +++ b/arch/um/drivers/chan_kern.c @@ -122,10 +122,10 @@ static int open_chan(struct list_head *chans) return err; } -void chan_enable_winch(struct chan *chan, struct tty_struct *tty) +void chan_enable_winch(struct chan *chan, struct tty_port *port) { if (chan && chan->primary && chan->ops->winch) - register_winch(chan->fd, tty); + register_winch(chan->fd, port); } static void line_timer_cb(struct work_struct *work) diff --git a/arch/um/drivers/chan_user.c b/arch/um/drivers/chan_user.c index 9be670ad23b5..3fd7c3efdb18 100644 --- a/arch/um/drivers/chan_user.c +++ b/arch/um/drivers/chan_user.c @@ -216,7 +216,7 @@ static int winch_thread(void *arg) } } -static int winch_tramp(int fd, struct tty_struct *tty, int *fd_out, +static int winch_tramp(int fd, struct tty_port *port, int *fd_out, unsigned long *stack_out) { struct winch_data data; @@ -271,7 +271,7 @@ static int winch_tramp(int fd, struct tty_struct *tty, int *fd_out, return err; } -void register_winch(int fd, struct tty_struct *tty) +void register_winch(int fd, struct tty_port *port) { unsigned long stack; int pid, thread, count, thread_fd = -1; @@ -281,17 +281,17 @@ void register_winch(int fd, struct tty_struct *tty) return; pid = tcgetpgrp(fd); - if (is_skas_winch(pid, fd, tty)) { - register_winch_irq(-1, fd, -1, tty, 0); + if (is_skas_winch(pid, fd, port)) { + register_winch_irq(-1, fd, -1, port, 0); return; } if (pid == -1) { - thread = winch_tramp(fd, tty, &thread_fd, &stack); + thread = winch_tramp(fd, port, &thread_fd, &stack); if (thread < 0) return; - register_winch_irq(thread_fd, fd, thread, tty, stack); + register_winch_irq(thread_fd, fd, thread, port, stack); count = write(thread_fd, &c, sizeof(c)); if (count != sizeof(c)) diff --git a/arch/um/drivers/chan_user.h b/arch/um/drivers/chan_user.h index dc693298eb8f..03f1b565c5f9 100644 --- a/arch/um/drivers/chan_user.h +++ b/arch/um/drivers/chan_user.h @@ -38,10 +38,10 @@ extern int generic_window_size(int fd, void *unused, unsigned short *rows_out, unsigned short *cols_out); extern void generic_free(void *data); -struct tty_struct; -extern void register_winch(int fd, struct tty_struct *tty); +struct tty_port; +extern void register_winch(int fd, struct tty_port *port); extern void register_winch_irq(int fd, int tty_fd, int pid, - struct tty_struct *tty, unsigned long stack); + struct tty_port *port, unsigned long stack); #define __channel_help(fn, prefix) \ __uml_help(fn, prefix "[0-9]*=<channel description>\n" \ diff --git a/arch/um/drivers/line.c b/arch/um/drivers/line.c index cc206eda245c..8035145f043b 100644 --- a/arch/um/drivers/line.c +++ b/arch/um/drivers/line.c @@ -299,7 +299,7 @@ static int line_activate(struct tty_port *port, struct tty_struct *tty) return ret; if (!line->sigio) { - chan_enable_winch(line->chan_out, tty); + chan_enable_winch(line->chan_out, port); line->sigio = 1; } @@ -309,8 +309,22 @@ static int line_activate(struct tty_port *port, struct tty_struct *tty) return 0; } +static void unregister_winch(struct tty_struct *tty); + +static void line_destruct(struct tty_port *port) +{ + struct tty_struct *tty = tty_port_tty_get(port); + struct line *line = tty->driver_data; + + if (line->sigio) { + unregister_winch(tty); + line->sigio = 0; + } +} + static const struct tty_port_operations line_port_ops = { .activate = line_activate, + .destruct = line_destruct, }; int line_open(struct tty_struct *tty, struct file *filp) @@ -334,18 +348,6 @@ int line_install(struct tty_driver *driver, struct tty_struct *tty, return 0; } -static void unregister_winch(struct tty_struct *tty); - -void line_cleanup(struct tty_struct *tty) -{ - struct line *line = tty->driver_data; - - if (line->sigio) { - unregister_winch(tty); - line->sigio = 0; - } -} - void line_close(struct tty_struct *tty, struct file * filp) { struct line *line = tty->driver_data; @@ -595,7 +597,7 @@ struct winch { int fd; int tty_fd; int pid; - struct tty_struct *tty; + struct tty_port *port; unsigned long stack; struct work_struct work; }; @@ -649,7 +651,7 @@ static irqreturn_t winch_interrupt(int irq, void *data) goto out; } } - tty = winch->tty; + tty = tty_port_tty_get(winch->port); if (tty != NULL) { line = tty->driver_data; if (line != NULL) { @@ -657,6 +659,7 @@ static irqreturn_t winch_interrupt(int irq, void *data) &tty->winsize.ws_col); kill_pgrp(tty->pgrp, SIGWINCH, 1); } + tty_kref_put(tty); } out: if (winch->fd != -1) @@ -664,7 +667,7 @@ static irqreturn_t winch_interrupt(int irq, void *data) return IRQ_HANDLED; } -void register_winch_irq(int fd, int tty_fd, int pid, struct tty_struct *tty, +void register_winch_irq(int fd, int tty_fd, int pid, struct tty_port *port, unsigned long stack) { struct winch *winch; @@ -679,7 +682,7 @@ void register_winch_irq(int fd, int tty_fd, int pid, struct tty_struct *tty, .fd = fd, .tty_fd = tty_fd, .pid = pid, - .tty = tty, + .port = port, .stack = stack }); if (um_request_irq(WINCH_IRQ, fd, IRQ_READ, winch_interrupt, @@ -708,15 +711,18 @@ static void unregister_winch(struct tty_struct *tty) { struct list_head *ele, *next; struct winch *winch; + struct tty_struct *wtty; spin_lock(&winch_handler_lock); list_for_each_safe(ele, next, &winch_handlers) { winch = list_entry(ele, struct winch, list); - if (winch->tty == tty) { + wtty = tty_port_tty_get(winch->port); + if (wtty == tty) { free_winch(winch); break; } + tty_kref_put(wtty); } spin_unlock(&winch_handler_lock); } diff --git a/arch/um/drivers/net_kern.c b/arch/um/drivers/net_kern.c index d8926c303629..39f186252e02 100644 --- a/arch/um/drivers/net_kern.c +++ b/arch/um/drivers/net_kern.c @@ -218,6 +218,7 @@ static int uml_net_start_xmit(struct sk_buff *skb, struct net_device *dev) spin_lock_irqsave(&lp->lock, flags); len = (*lp->write)(lp->fd, skb, lp); + skb_tx_timestamp(skb); if (len == skb->len) { dev->stats.tx_packets++; @@ -281,6 +282,7 @@ static void uml_net_get_drvinfo(struct net_device *dev, static const struct ethtool_ops uml_net_ethtool_ops = { .get_drvinfo = uml_net_get_drvinfo, .get_link = ethtool_op_get_link, + .get_ts_info = ethtool_op_get_ts_info, }; static void uml_net_user_timer_expire(unsigned long _conn) diff --git a/arch/um/drivers/ssl.c b/arch/um/drivers/ssl.c index 16fdd0a0f9d6..b8d14fa52059 100644 --- a/arch/um/drivers/ssl.c +++ b/arch/um/drivers/ssl.c @@ -105,7 +105,6 @@ static const struct tty_operations ssl_ops = { .throttle = line_throttle, .unthrottle = line_unthrottle, .install = ssl_install, - .cleanup = line_cleanup, .hangup = line_hangup, }; diff --git a/arch/um/drivers/stdio_console.c b/arch/um/drivers/stdio_console.c index 827777af3f6d..7b361f36ca96 100644 --- a/arch/um/drivers/stdio_console.c +++ b/arch/um/drivers/stdio_console.c @@ -110,7 +110,6 @@ static const struct tty_operations console_ops = { .set_termios = line_set_termios, .throttle = line_throttle, .unthrottle = line_unthrottle, - .cleanup = line_cleanup, .hangup = line_hangup, }; diff --git a/arch/um/os-Linux/signal.c b/arch/um/os-Linux/signal.c index b1469fe93295..9d9f1b4bf826 100644 --- a/arch/um/os-Linux/signal.c +++ b/arch/um/os-Linux/signal.c @@ -15,7 +15,7 @@ #include <sysdep/mcontext.h> #include "internal.h" -void (*sig_info[NSIG])(int, siginfo_t *, struct uml_pt_regs *) = { +void (*sig_info[NSIG])(int, struct siginfo *, struct uml_pt_regs *) = { [SIGTRAP] = relay_signal, [SIGFPE] = relay_signal, [SIGILL] = relay_signal, diff --git a/arch/um/os-Linux/start_up.c b/arch/um/os-Linux/start_up.c index da4b9e9999fd..337518c5042a 100644 --- a/arch/um/os-Linux/start_up.c +++ b/arch/um/os-Linux/start_up.c @@ -15,6 +15,8 @@ #include <sys/mman.h> #include <sys/stat.h> #include <sys/wait.h> +#include <sys/time.h> +#include <sys/resource.h> #include <asm/unistd.h> #include <init.h> #include <os.h> diff --git a/arch/unicore32/Kconfig b/arch/unicore32/Kconfig index dc50b157fc83..2943e3acdf0c 100644 --- a/arch/unicore32/Kconfig +++ b/arch/unicore32/Kconfig @@ -9,7 +9,7 @@ config UNICORE32 select GENERIC_ATOMIC64 select HAVE_KERNEL_LZO select HAVE_KERNEL_LZMA - select HAVE_VIRT_TO_BUS + select VIRT_TO_BUS select ARCH_HAVE_CUSTOM_GPIO_H select GENERIC_FIND_FIRST_BIT select GENERIC_IRQ_PROBE diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index a4f24f5b1218..70c0f3da0476 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -112,7 +112,7 @@ config X86 select GENERIC_STRNLEN_USER select HAVE_CONTEXT_TRACKING if X86_64 select HAVE_IRQ_TIME_ACCOUNTING - select HAVE_VIRT_TO_BUS + select VIRT_TO_BUS select MODULES_USE_ELF_REL if X86_32 select MODULES_USE_ELF_RELA if X86_64 select CLONE_BACKWARDS if X86_32 diff --git a/arch/x86/kernel/cpu/perf_event_intel_ds.c b/arch/x86/kernel/cpu/perf_event_intel_ds.c index 826054a4f2ee..b05a575d56f4 100644 --- a/arch/x86/kernel/cpu/perf_event_intel_ds.c +++ b/arch/x86/kernel/cpu/perf_event_intel_ds.c @@ -729,3 +729,13 @@ void intel_ds_init(void) } } } + +void perf_restore_debug_store(void) +{ + struct debug_store *ds = __this_cpu_read(cpu_hw_events.ds); + + if (!x86_pmu.bts && !x86_pmu.pebs) + return; + + wrmsrl(MSR_IA32_DS_AREA, (unsigned long)ds); +} diff --git a/arch/x86/power/cpu.c b/arch/x86/power/cpu.c index 120cee1c3f8d..3c68768d7a75 100644 --- a/arch/x86/power/cpu.c +++ b/arch/x86/power/cpu.c @@ -11,6 +11,7 @@ #include <linux/suspend.h> #include <linux/export.h> #include <linux/smp.h> +#include <linux/perf_event.h> #include <asm/pgtable.h> #include <asm/proto.h> @@ -228,6 +229,7 @@ static void __restore_processor_state(struct saved_context *ctxt) do_fpu_end(); x86_platform.restore_sched_clock_state(); mtrr_bp_restore(); + perf_restore_debug_store(); } /* Needed by apm.c */ diff --git a/arch/xtensa/Kconfig b/arch/xtensa/Kconfig index 35876ffac11d..b09de49dbec5 100644 --- a/arch/xtensa/Kconfig +++ b/arch/xtensa/Kconfig @@ -9,7 +9,7 @@ config XTENSA select HAVE_IDE select GENERIC_ATOMIC64 select HAVE_GENERIC_HARDIRQS - select HAVE_VIRT_TO_BUS + select VIRT_TO_BUS select GENERIC_IRQ_SHOW select GENERIC_CPU_DEVICES select MODULES_USE_ELF_RELA |