diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2016-05-05 15:31:35 -0700 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2016-05-05 15:31:35 -0700 |
commit | c4781a8df9566ca13bf3ac6a65f6aae8d3f6e499 (patch) | |
tree | fe8d1390f67159503c48c89a15d948f3683d9353 /arch | |
parent | 54176cc6803844613b3dca13174c13c47e9686db (diff) | |
parent | ed19ca7fa8bd44936aa3d5284bf38f5d96a28b35 (diff) |
Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Arnd Bergmann:
"Here are a couple last-minute fixes for ARM SoCs. Most of them are
for the OMAP platforms, the rest are all for different platforms.
OMAP:
All dts fixes, mostly affecting voltages and pinctrl for various
device drivers:
- Regulator minimum voltage fixes for omap5
- ISP syscon register offset fix for omap3
- Fix regulator initial modes for n900
- Fix omap5 pinctrl wkup instance size
Allwinner:
Remove incorrect constraints from a dcdc1 regulator
Alltera SoCFPGA:
Fix compilation in thumb2 mode
Samsung exynos:
Fix a potential oops in the pm-domain error handling
Davinci:
Avoid a link error if NVMEM is disabled
Renesas:
Do not mark an external uart clock as disabled, to allow probing
the uarts"
* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
ARM: davinci: only use NVMEM when available
ARM: SoCFPGA: Fix secondary CPU startup in thumb2 kernel
ARM: dts: omap5: fix range of permitted wakeup pinmux registers
ARM: dts: omap3-n900: Specify peripherals LDO regulators initial mode
ARM: dts: omap3: Fix ISP syscon register offset
ARM: dts: omap5-cm-t54: fix ldo1_reg and ldo4_reg ranges
ARM: dts: omap5-board-common: fix ldo1_reg and ldo4_reg ranges
arm64: dts: r8a7795: Don't disable referenced optional scif clock
ARM: EXYNOS: Properly skip unitialized parent clock in power domain on
ARM: dts: sun8i-q8-common: Do not set constraints on dc1sw regulator
Diffstat (limited to 'arch')
-rw-r--r-- | arch/arm/boot/dts/omap3-n900.dts | 9 | ||||
-rw-r--r-- | arch/arm/boot/dts/omap34xx.dtsi | 2 | ||||
-rw-r--r-- | arch/arm/boot/dts/omap5-board-common.dtsi | 4 | ||||
-rw-r--r-- | arch/arm/boot/dts/omap5-cm-t54.dts | 4 | ||||
-rw-r--r-- | arch/arm/boot/dts/omap5.dtsi | 2 | ||||
-rw-r--r-- | arch/arm/boot/dts/sun8i-q8-common.dtsi | 2 | ||||
-rw-r--r-- | arch/arm/mach-davinci/board-mityomapl138.c | 5 | ||||
-rw-r--r-- | arch/arm/mach-davinci/common.c | 5 | ||||
-rw-r--r-- | arch/arm/mach-exynos/pm_domains.c | 2 | ||||
-rw-r--r-- | arch/arm/mach-socfpga/headsmp.S | 1 | ||||
-rw-r--r-- | arch/arm64/boot/dts/renesas/r8a7795.dtsi | 1 |
11 files changed, 27 insertions, 10 deletions
diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts index b3c26a96a726..d9e2d9c6e999 100644 --- a/arch/arm/boot/dts/omap3-n900.dts +++ b/arch/arm/boot/dts/omap3-n900.dts @@ -329,6 +329,7 @@ regulator-name = "V28"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; + regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */ regulator-always-on; /* due to battery cover sensor */ }; @@ -336,30 +337,35 @@ regulator-name = "VCSI"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; + regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */ }; &vaux3 { regulator-name = "VMMC2_30"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <3000000>; + regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */ }; &vaux4 { regulator-name = "VCAM_ANA_28"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; + regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */ }; &vmmc1 { regulator-name = "VMMC1"; regulator-min-microvolt = <1850000>; regulator-max-microvolt = <3150000>; + regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */ }; &vmmc2 { regulator-name = "V28_A"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <3000000>; + regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */ regulator-always-on; /* due VIO leak to AIC34 VDDs */ }; @@ -367,6 +373,7 @@ regulator-name = "VPLL"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; + regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */ regulator-always-on; }; @@ -374,6 +381,7 @@ regulator-name = "VSDI_CSI"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; + regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */ regulator-always-on; }; @@ -381,6 +389,7 @@ regulator-name = "VMMC2_IO_18"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; + regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */ }; &vio { diff --git a/arch/arm/boot/dts/omap34xx.dtsi b/arch/arm/boot/dts/omap34xx.dtsi index 387dc31822fe..96f8ce7bd2af 100644 --- a/arch/arm/boot/dts/omap34xx.dtsi +++ b/arch/arm/boot/dts/omap34xx.dtsi @@ -46,7 +46,7 @@ 0x480bd800 0x017c>; interrupts = <24>; iommus = <&mmu_isp>; - syscon = <&scm_conf 0xdc>; + syscon = <&scm_conf 0x6c>; ti,phy-type = <OMAP3ISP_PHY_TYPE_COMPLEX_IO>; #clock-cells = <1>; ports { diff --git a/arch/arm/boot/dts/omap5-board-common.dtsi b/arch/arm/boot/dts/omap5-board-common.dtsi index 902657d6713b..914bf4c47404 100644 --- a/arch/arm/boot/dts/omap5-board-common.dtsi +++ b/arch/arm/boot/dts/omap5-board-common.dtsi @@ -472,7 +472,7 @@ ldo1_reg: ldo1 { /* VDDAPHY_CAM: vdda_csiport */ regulator-name = "ldo1"; - regulator-min-microvolt = <1500000>; + regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; @@ -498,7 +498,7 @@ ldo4_reg: ldo4 { /* VDDAPHY_DISP: vdda_dsiport/hdmi */ regulator-name = "ldo4"; - regulator-min-microvolt = <1500000>; + regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; diff --git a/arch/arm/boot/dts/omap5-cm-t54.dts b/arch/arm/boot/dts/omap5-cm-t54.dts index ecc591dc0778..4d87d9c6c86d 100644 --- a/arch/arm/boot/dts/omap5-cm-t54.dts +++ b/arch/arm/boot/dts/omap5-cm-t54.dts @@ -513,7 +513,7 @@ ldo1_reg: ldo1 { /* VDDAPHY_CAM: vdda_csiport */ regulator-name = "ldo1"; - regulator-min-microvolt = <1500000>; + regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; @@ -537,7 +537,7 @@ ldo4_reg: ldo4 { /* VDDAPHY_DISP: vdda_dsiport/hdmi */ regulator-name = "ldo4"; - regulator-min-microvolt = <1500000>; + regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index 38805ebbe2ba..120b6b80cd39 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -269,7 +269,7 @@ omap5_pmx_wkup: pinmux@c840 { compatible = "ti,omap5-padconf", "pinctrl-single"; - reg = <0xc840 0x0038>; + reg = <0xc840 0x003c>; #address-cells = <1>; #size-cells = <0>; #interrupt-cells = <1>; diff --git a/arch/arm/boot/dts/sun8i-q8-common.dtsi b/arch/arm/boot/dts/sun8i-q8-common.dtsi index 9d2b7e2f5975..346a49d805a7 100644 --- a/arch/arm/boot/dts/sun8i-q8-common.dtsi +++ b/arch/arm/boot/dts/sun8i-q8-common.dtsi @@ -125,8 +125,6 @@ }; ®_dc1sw { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; regulator-name = "vcc-lcd"; }; diff --git a/arch/arm/mach-davinci/board-mityomapl138.c b/arch/arm/mach-davinci/board-mityomapl138.c index d97c588550ad..bc4e63fa9808 100644 --- a/arch/arm/mach-davinci/board-mityomapl138.c +++ b/arch/arm/mach-davinci/board-mityomapl138.c @@ -121,6 +121,11 @@ static void read_factory_config(struct nvmem_device *nvmem, void *context) const char *partnum = NULL; struct davinci_soc_info *soc_info = &davinci_soc_info; + if (!IS_BUILTIN(CONFIG_NVMEM)) { + pr_warn("Factory Config not available without CONFIG_NVMEM\n"); + goto bad_config; + } + ret = nvmem_device_read(nvmem, 0, sizeof(factory_config), &factory_config); if (ret != sizeof(struct factory_config)) { diff --git a/arch/arm/mach-davinci/common.c b/arch/arm/mach-davinci/common.c index f55ef2ef2f92..742133b7266a 100644 --- a/arch/arm/mach-davinci/common.c +++ b/arch/arm/mach-davinci/common.c @@ -33,6 +33,11 @@ void davinci_get_mac_addr(struct nvmem_device *nvmem, void *context) char *mac_addr = davinci_soc_info.emac_pdata->mac_addr; off_t offset = (off_t)context; + if (!IS_BUILTIN(CONFIG_NVMEM)) { + pr_warn("Cannot read MAC addr from EEPROM without CONFIG_NVMEM\n"); + return; + } + /* Read MAC addr from EEPROM */ if (nvmem_device_read(nvmem, offset, ETH_ALEN, mac_addr) == ETH_ALEN) pr_info("Read MAC addr from EEPROM: %pM\n", mac_addr); diff --git a/arch/arm/mach-exynos/pm_domains.c b/arch/arm/mach-exynos/pm_domains.c index 7c21760f590f..875a2bab64f6 100644 --- a/arch/arm/mach-exynos/pm_domains.c +++ b/arch/arm/mach-exynos/pm_domains.c @@ -92,7 +92,7 @@ static int exynos_pd_power(struct generic_pm_domain *domain, bool power_on) if (IS_ERR(pd->clk[i])) break; - if (IS_ERR(pd->clk[i])) + if (IS_ERR(pd->pclk[i])) continue; /* Skip on first power up */ if (clk_set_parent(pd->clk[i], pd->pclk[i])) pr_err("%s: error setting parent to clock%d\n", diff --git a/arch/arm/mach-socfpga/headsmp.S b/arch/arm/mach-socfpga/headsmp.S index 5d94b7a2fb10..c160fa3007e9 100644 --- a/arch/arm/mach-socfpga/headsmp.S +++ b/arch/arm/mach-socfpga/headsmp.S @@ -13,6 +13,7 @@ #include <asm/assembler.h> .arch armv7-a + .arm ENTRY(secondary_trampoline) /* CPU1 will always fetch from 0x0 when it is brought out of reset. diff --git a/arch/arm64/boot/dts/renesas/r8a7795.dtsi b/arch/arm64/boot/dts/renesas/r8a7795.dtsi index a7315ebe3883..706d2426024f 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a7795.dtsi @@ -120,7 +120,6 @@ compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <0>; - status = "disabled"; }; soc { |