Merge tag 'soc-fixes-6.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC fixes from Arnd Bergmann:
 "The majority of bugfixes is once more for the NXP i.MX platform,
  addressing issue with i.MX8M (UART, watchdog and ethernet) as well as
  imx8dxl power button and the USB modem on an imx7 board.

  The reason that i.MX always shows up here is obviously not that they
  are more buggy than the others, but they have the most boards and are
  good about getting fixes in quickly.

  The other DT fixes are for the Nuvoton wpcm450 flash controller and
  the i2c mux on an ASpeed board.

  Lastly, there are updates to the MAINTAINERS entries for Mediatek,
  AMD/Seattle and NXP SoCs, as well as a lone code fix for error
  handling in the allwinner 'rsb' bus driver"

* tag 'soc-fixes-6.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  ARM: dts: wpcm450: Add nuvoton,shm = <&shm> to FIU node
  MAINTAINERS: Update entry for MediaTek SoC support
  MAINTAINERS: amd: drop inactive Brijesh Singh
  ARM: dts: imx7d-smegw01: Fix USB host over-current polarity
  arm64: dts: imx8mm-verdin: Do not power down eth-phy
  MAINTAINERS: match freescale ARM64 DT directory in i.MX entry
  arm64: dts: imx8mm: Fix pad control for UART1_DTE_RX
  ARM: dts: aspeed: Fix pca9849 compatible
  arm64: dts: freescale: imx8dxl: fix sc_pwrkey's property name linux,keycode
  arm64: dts: imx8m-venice: Remove incorrect 'uart-has-rtscts'
  arm64: dts: imx8mm: Reinstate GPIO watchdog always-running property on eDM SBC
  bus: sunxi-rsb: Fix error handling in sunxi_rsb_init()

15 files changed, 8 insertions, 16 deletions

diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-bonnell.dts b/arch/arm/boot/dts/aspeed-bmc-ibm-bonnell.dts
index d1971ddf06a5..7f755e5a4624 100644
--- a/arch/arm/boot/dts/aspeed-bmc-ibm-bonnell.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-ibm-bonnell.dts
@@ -751,7 +751,7 @@
 	};
 
 	pca9849@75 {
-		compatible = "nxp,pca849";
+		compatible = "nxp,pca9849";
 		reg = <0x75>;
 		#address-cells = <1>;
 		#size-cells = <0>;
diff --git a/arch/arm/boot/dts/imx7d-smegw01.dts b/arch/arm/boot/dts/imx7d-smegw01.dts
index 546268b8d0b1..c0f00f5db11e 100644
--- a/arch/arm/boot/dts/imx7d-smegw01.dts
+++ b/arch/arm/boot/dts/imx7d-smegw01.dts
@@ -198,6 +198,7 @@
 &usbotg2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usbotg2>;
+	over-current-active-low;
 	dr_mode = "host";
 	status = "okay";
 };
@@ -374,7 +375,7 @@
 
 	pinctrl_usbotg2: usbotg2grp {
 		fsl,pins = <
-			MX7D_PAD_UART3_RTS_B__USB_OTG2_OC	0x04
+			MX7D_PAD_UART3_RTS_B__USB_OTG2_OC	0x5c
 		>;
 	};
 
diff --git a/arch/arm/boot/dts/nuvoton-wpcm450.dtsi b/arch/arm/boot/dts/nuvoton-wpcm450.dtsi
index b637241316bb..fd671c7a1e5d 100644
--- a/arch/arm/boot/dts/nuvoton-wpcm450.dtsi
+++ b/arch/arm/boot/dts/nuvoton-wpcm450.dtsi
@@ -480,6 +480,7 @@
 			reg = <0xc8000000 0x1000>, <0xc0000000 0x4000000>;
 			reg-names = "control", "memory";
 			clocks = <&clk 0>;
+			nuvoton,shm = <&shm>;
 			status = "disabled";
 		};
 
diff --git a/arch/arm64/boot/dts/freescale/imx8dxl.dtsi b/arch/arm64/boot/dts/freescale/imx8dxl.dtsi
index 0c64b9194621..214f21bd0cb4 100644
--- a/arch/arm64/boot/dts/freescale/imx8dxl.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8dxl.dtsi
@@ -164,7 +164,7 @@
 
 		sc_pwrkey: keys {
 			compatible = "fsl,imx8qxp-sc-key", "fsl,imx-sc-key";
-			linux,keycode = <KEY_POWER>;
+			linux,keycodes = <KEY_POWER>;
 			wakeup-source;
 		};
 
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-data-modul-edm-sbc.dts b/arch/arm64/boot/dts/freescale/imx8mm-data-modul-edm-sbc.dts
index 752f409a30b1..9889319d4f04 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-data-modul-edm-sbc.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-data-modul-edm-sbc.dts
@@ -88,6 +88,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_watchdog_gpio>;
 		compatible = "linux,wdt-gpio";
+		always-running;
 		gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
 		hw_algo = "level";
 		/* Reset triggers in 2..3 seconds */
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-pinfunc.h b/arch/arm64/boot/dts/freescale/imx8mm-pinfunc.h
index 83c8f715cd90..b1f11098d248 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-pinfunc.h
+++ b/arch/arm64/boot/dts/freescale/imx8mm-pinfunc.h
@@ -602,7 +602,7 @@
 #define MX8MM_IOMUXC_UART1_RXD_GPIO5_IO22                                   0x234 0x49C 0x000 0x5 0x0
 #define MX8MM_IOMUXC_UART1_RXD_TPSMP_HDATA24                                0x234 0x49C 0x000 0x7 0x0
 #define MX8MM_IOMUXC_UART1_TXD_UART1_DCE_TX                                 0x238 0x4A0 0x000 0x0 0x0
-#define MX8MM_IOMUXC_UART1_TXD_UART1_DTE_RX                                 0x238 0x4A0 0x4F4 0x0 0x0
+#define MX8MM_IOMUXC_UART1_TXD_UART1_DTE_RX                                 0x238 0x4A0 0x4F4 0x0 0x1
 #define MX8MM_IOMUXC_UART1_TXD_ECSPI3_MOSI                                  0x238 0x4A0 0x000 0x1 0x0
 #define MX8MM_IOMUXC_UART1_TXD_GPIO5_IO23                                   0x238 0x4A0 0x000 0x5 0x0
 #define MX8MM_IOMUXC_UART1_TXD_TPSMP_HDATA25                                0x238 0x4A0 0x000 0x7 0x0
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-rs232-rts.dtso b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-rs232-rts.dtso
index 3ea73a6886ff..f6ad1a4b8b66 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-rs232-rts.dtso
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-rs232-rts.dtso
@@ -33,7 +33,6 @@
 	pinctrl-0 = <&pinctrl_uart2>;
 	rts-gpios = <&gpio5 29 GPIO_ACTIVE_LOW>;
 	cts-gpios = <&gpio5 28 GPIO_ACTIVE_LOW>;
-	uart-has-rtscts;
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-rs232-rts.dtso b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-rs232-rts.dtso
index 2fa635e1c1a8..1f8ea20dfafc 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-rs232-rts.dtso
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-rs232-rts.dtso
@@ -33,7 +33,6 @@
 	pinctrl-0 = <&pinctrl_uart2>;
 	rts-gpios = <&gpio5 29 GPIO_ACTIVE_LOW>;
 	cts-gpios = <&gpio5 28 GPIO_ACTIVE_LOW>;
-	uart-has-rtscts;
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi
index 244ef8d6cc68..7761d5671cb1 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi
@@ -222,7 +222,6 @@
 	pinctrl-0 = <&pinctrl_uart3>, <&pinctrl_bten>;
 	cts-gpios = <&gpio5 8 GPIO_ACTIVE_LOW>;
 	rts-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
-	uart-has-rtscts;
 	status = "okay";
 
 	bluetooth {
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts
index 6433c205f8dd..64b366e83fa1 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts
@@ -733,7 +733,6 @@
 	dtr-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
 	dsr-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
 	dcd-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
-	uart-has-rtscts;
 	status = "okay";
 };
 
@@ -749,7 +748,6 @@
 	pinctrl-0 = <&pinctrl_uart3>, <&pinctrl_uart3_gpio>;
 	cts-gpios = <&gpio4 10 GPIO_ACTIVE_LOW>;
 	rts-gpios = <&gpio4 9 GPIO_ACTIVE_LOW>;
-	uart-has-rtscts;
 	status = "okay";
 };
 
@@ -758,7 +756,6 @@
 	pinctrl-0 = <&pinctrl_uart4>, <&pinctrl_uart4_gpio>;
 	cts-gpios = <&gpio5 11 GPIO_ACTIVE_LOW>;
 	rts-gpios = <&gpio5 12 GPIO_ACTIVE_LOW>;
-	uart-has-rtscts;
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts
index 32872b0b1aaf..e8bc1fccc47b 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts
@@ -664,7 +664,6 @@
 	pinctrl-0 = <&pinctrl_uart1>, <&pinctrl_uart1_gpio>;
 	rts-gpios = <&gpio4 10 GPIO_ACTIVE_LOW>;
 	cts-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
-	uart-has-rtscts;
 	status = "okay";
 };
 
@@ -681,7 +680,6 @@
 	pinctrl-0 = <&pinctrl_uart3>, <&pinctrl_uart3_gpio>;
 	rts-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
 	cts-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
-	uart-has-rtscts;
 	status = "okay";
 
 	bluetooth {
@@ -699,7 +697,6 @@
 	dtr-gpios = <&gpio4 3 GPIO_ACTIVE_LOW>;
 	dsr-gpios = <&gpio4 4 GPIO_ACTIVE_LOW>;
 	dcd-gpios = <&gpio4 6 GPIO_ACTIVE_LOW>;
-	uart-has-rtscts;
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7903.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7903.dts
index 8ce562246a08..acc2ba8e00a8 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7903.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7903.dts
@@ -581,7 +581,6 @@
 	dtr-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
 	dsr-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
 	dcd-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>;
-	uart-has-rtscts;
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi
index 0d454e0e2f7c..702d87621bb4 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi
@@ -98,6 +98,7 @@
 		off-on-delay = <500000>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_reg_eth>;
+		regulator-always-on;
 		regulator-boot-on;
 		regulator-max-microvolt = <3300000>;
 		regulator-min-microvolt = <3300000>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts b/arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts
index b9444e4a3d2d..7c12518dbc96 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts
@@ -643,7 +643,6 @@
 	pinctrl-0 = <&pinctrl_uart3>, <&pinctrl_uart3_gpio>;
 	rts-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
 	cts-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
-	uart-has-rtscts;
 	status = "okay";
 
 	bluetooth {
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts
index ceeca4966fc5..8eb7d5ee38da 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts
@@ -623,7 +623,6 @@
 	pinctrl-0 = <&pinctrl_uart3>, <&pinctrl_uart3_gpio>;
 	cts-gpios = <&gpio3 21 GPIO_ACTIVE_LOW>;
 	rts-gpios = <&gpio3 22 GPIO_ACTIVE_LOW>;
-	uart-has-rtscts;
 	status = "okay";
 
 	bluetooth {