Merge remote-tracking branch 'agust/next' into next

From Anatolij:
<<
There are cleanups for some mpc5121 specific drivers and DTS files
in preparation to switch mpc5121 clock support to a clock driver
based on common clock framework. Additionally Sebastian fixed the
mpc52xx PIC driver so that it builds when using older gcc versions.
>>

30 files changed, 171 insertions, 138 deletions

diff --git a/arch/arm/boot/dts/msm8960-cdp.dts b/arch/arm/boot/dts/msm8960-cdp.dts
index db2060c46540..9c1167b0459b 100644
--- a/arch/arm/boot/dts/msm8960-cdp.dts
+++ b/arch/arm/boot/dts/msm8960-cdp.dts
@@ -26,7 +26,7 @@
 		cpu-offset = <0x80000>;
 	};
 
-	msmgpio: gpio@fd510000 {
+	msmgpio: gpio@800000 {
 		compatible = "qcom,msm-gpio";
 		gpio-controller;
 		#gpio-cells = <2>;
@@ -34,7 +34,7 @@
 		interrupts = <0 32 0x4>;
 		interrupt-controller;
 		#interrupt-cells = <2>;
-		reg = <0xfd510000 0x4000>;
+		reg = <0x800000 0x4000>;
 	};
 
 	serial@16440000 {
diff --git a/arch/arm/boot/dts/omap5-uevm.dts b/arch/arm/boot/dts/omap5-uevm.dts
index 08b72678abff..65d7b601651c 100644
--- a/arch/arm/boot/dts/omap5-uevm.dts
+++ b/arch/arm/boot/dts/omap5-uevm.dts
@@ -235,7 +235,7 @@
 };
 
 &mmc1 {
-	vmmc-supply = <&vmmcsd_fixed>;
+	vmmc-supply = <&ldo9_reg>;
 	bus-width = <4>;
 };
 
@@ -282,6 +282,7 @@
 
 			regulators {
 				smps123_reg: smps123 {
+					/* VDD_OPP_MPU */
 					regulator-name = "smps123";
 					regulator-min-microvolt = < 600000>;
 					regulator-max-microvolt = <1500000>;
@@ -290,6 +291,7 @@
 				};
 
 				smps45_reg: smps45 {
+					/* VDD_OPP_MM */
 					regulator-name = "smps45";
 					regulator-min-microvolt = < 600000>;
 					regulator-max-microvolt = <1310000>;
@@ -298,6 +300,7 @@
 				};
 
 				smps6_reg: smps6 {
+					/* VDD_DDR3 - over VDD_SMPS6 */
 					regulator-name = "smps6";
 					regulator-min-microvolt = <1200000>;
 					regulator-max-microvolt = <1200000>;
@@ -306,6 +309,7 @@
 				};
 
 				smps7_reg: smps7 {
+					/* VDDS_1v8_OMAP over VDDS_1v8_MAIN */
 					regulator-name = "smps7";
 					regulator-min-microvolt = <1800000>;
 					regulator-max-microvolt = <1800000>;
@@ -314,6 +318,7 @@
 				};
 
 				smps8_reg: smps8 {
+					/* VDD_OPP_CORE */
 					regulator-name = "smps8";
 					regulator-min-microvolt = < 600000>;
 					regulator-max-microvolt = <1310000>;
@@ -322,15 +327,15 @@
 				};
 
 				smps9_reg: smps9 {
+					/* VDDA_2v1_AUD over VDD_2v1 */
 					regulator-name = "smps9";
 					regulator-min-microvolt = <2100000>;
 					regulator-max-microvolt = <2100000>;
-					regulator-always-on;
-					regulator-boot-on;
 					ti,smps-range = <0x80>;
 				};
 
 				smps10_reg: smps10 {
+					/* VBUS_5V_OTG */
 					regulator-name = "smps10";
 					regulator-min-microvolt = <5000000>;
 					regulator-max-microvolt = <5000000>;
@@ -339,38 +344,40 @@
 				};
 
 				ldo1_reg: ldo1 {
+					/* VDDAPHY_CAM: vdda_csiport */
 					regulator-name = "ldo1";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-					regulator-always-on;
-					regulator-boot-on;
+					regulator-min-microvolt = <1500000>;
+					regulator-max-microvolt = <1800000>;
 				};
 
 				ldo2_reg: ldo2 {
+					/* VCC_2V8_DISP: Does not go anywhere */
 					regulator-name = "ldo2";
-					regulator-min-microvolt = <2900000>;
-					regulator-max-microvolt = <2900000>;
-					regulator-always-on;
-					regulator-boot-on;
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+					/* Unused */
+					status = "disabled";
 				};
 
 				ldo3_reg: ldo3 {
+					/* VDDAPHY_MDM: vdda_lli */
 					regulator-name = "ldo3";
-					regulator-min-microvolt = <3000000>;
-					regulator-max-microvolt = <3000000>;
-					regulator-always-on;
+					regulator-min-microvolt = <1500000>;
+					regulator-max-microvolt = <1500000>;
 					regulator-boot-on;
+					/* Only if Modem is used */
+					status = "disabled";
 				};
 
 				ldo4_reg: ldo4 {
+					/* VDDAPHY_DISP: vdda_dsiport/hdmi */
 					regulator-name = "ldo4";
-					regulator-min-microvolt = <2200000>;
-					regulator-max-microvolt = <2200000>;
-					regulator-always-on;
-					regulator-boot-on;
+					regulator-min-microvolt = <1500000>;
+					regulator-max-microvolt = <1800000>;
 				};
 
 				ldo5_reg: ldo5 {
+					/* VDDA_1V8_PHY: usb/sata/hdmi.. */
 					regulator-name = "ldo5";
 					regulator-min-microvolt = <1800000>;
 					regulator-max-microvolt = <1800000>;
@@ -379,38 +386,43 @@
 				};
 
 				ldo6_reg: ldo6 {
+					/* VDDS_1V2_WKUP: hsic/ldo_emu_wkup */
 					regulator-name = "ldo6";
-					regulator-min-microvolt = <1500000>;
-					regulator-max-microvolt = <1500000>;
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
 					regulator-always-on;
 					regulator-boot-on;
 				};
 
 				ldo7_reg: ldo7 {
+					/* VDD_VPP: vpp1 */
 					regulator-name = "ldo7";
-					regulator-min-microvolt = <1500000>;
-					regulator-max-microvolt = <1500000>;
-					regulator-always-on;
-					regulator-boot-on;
+					regulator-min-microvolt = <2000000>;
+					regulator-max-microvolt = <2000000>;
+					/* Only for efuse reprograming! */
+					status = "disabled";
 				};
 
 				ldo8_reg: ldo8 {
+					/* VDD_3v0: Does not go anywhere */
 					regulator-name = "ldo8";
-					regulator-min-microvolt = <1500000>;
-					regulator-max-microvolt = <1500000>;
-					regulator-always-on;
+					regulator-min-microvolt = <3000000>;
+					regulator-max-microvolt = <3000000>;
 					regulator-boot-on;
+					/* Unused */
+					status = "disabled";
 				};
 
 				ldo9_reg: ldo9 {
+					/* VCC_DV_SDIO: vdds_sdcard */
 					regulator-name = "ldo9";
 					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <3300000>;
-					regulator-always-on;
+					regulator-max-microvolt = <3000000>;
 					regulator-boot-on;
 				};
 
 				ldoln_reg: ldoln {
+					/* VDDA_1v8_REF: vdds_osc/mm_l4per.. */
 					regulator-name = "ldoln";
 					regulator-min-microvolt = <1800000>;
 					regulator-max-microvolt = <1800000>;
@@ -419,12 +431,20 @@
 				};
 
 				ldousb_reg: ldousb {
+					/* VDDA_3V_USB: VDDA_USBHS33 */
 					regulator-name = "ldousb";
 					regulator-min-microvolt = <3250000>;
 					regulator-max-microvolt = <3250000>;
 					regulator-always-on;
 					regulator-boot-on;
 				};
+
+				regen3_reg: regen3 {
+					/* REGEN3 controls LDO9 supply to card */
+					regulator-name = "regen3";
+					regulator-always-on;
+					regulator-boot-on;
+				};
 			};
 		};
 	};
diff --git a/arch/arm/boot/dts/stih41x.dtsi b/arch/arm/boot/dts/stih41x.dtsi
index 7321403cab8a..f5b9898d9c6e 100644
--- a/arch/arm/boot/dts/stih41x.dtsi
+++ b/arch/arm/boot/dts/stih41x.dtsi
@@ -6,10 +6,12 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		cpu@0 {
+			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			reg = <0>;
 		};
 		cpu@1 {
+			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			reg = <1>;
 		};
diff --git a/arch/arm/boot/dts/tegra20-colibri-512.dtsi b/arch/arm/boot/dts/tegra20-colibri-512.dtsi
index 2fcb3f2ca160..5592be6f2f7a 100644
--- a/arch/arm/boot/dts/tegra20-colibri-512.dtsi
+++ b/arch/arm/boot/dts/tegra20-colibri-512.dtsi
@@ -457,6 +457,7 @@
 	};
 
 	usb-phy@c5004000 {
+		status = "okay";
 		nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 1)
 			GPIO_ACTIVE_LOW>;
 	};
diff --git a/arch/arm/mach-msm/Kconfig b/arch/arm/mach-msm/Kconfig
index 614e41e7881b..905efc8cac79 100644
--- a/arch/arm/mach-msm/Kconfig
+++ b/arch/arm/mach-msm/Kconfig
@@ -121,8 +121,7 @@ config MSM_SMD
 	bool
 
 config MSM_GPIOMUX
-	depends on !(ARCH_MSM8X60 || ARCH_MSM8960)
-	bool "MSM V1 TLMM GPIOMUX architecture"
+	bool
 	help
 	  Support for MSM V1 TLMM GPIOMUX architecture.
 
diff --git a/arch/arm/mach-msm/gpiomux-v1.c b/arch/arm/mach-msm/gpiomux-v1.c
deleted file mode 100644
index 27de2abd7144..000000000000
--- a/arch/arm/mach-msm/gpiomux-v1.c
+++ /dev/null
@@ -1,33 +0,0 @@
-/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA.
- */
-#include <linux/kernel.h>
-#include "gpiomux.h"
-#include "proc_comm.h"
-
-void __msm_gpiomux_write(unsigned gpio, gpiomux_config_t val)
-{
-	unsigned tlmm_config  = (val & ~GPIOMUX_CTL_MASK) |
-				((gpio & 0x3ff) << 4);
-	unsigned tlmm_disable = 0;
-	int rc;
-
-	rc = msm_proc_comm(PCOM_RPC_GPIO_TLMM_CONFIG_EX,
-			   &tlmm_config, &tlmm_disable);
-	if (rc)
-		pr_err("%s: unexpected proc_comm failure %d: %08x %08x\n",
-		       __func__, rc, tlmm_config, tlmm_disable);
-}
diff --git a/arch/arm/mach-msm/gpiomux.h b/arch/arm/mach-msm/gpiomux.h
index 8e82f41a8923..4410d7766f93 100644
--- a/arch/arm/mach-msm/gpiomux.h
+++ b/arch/arm/mach-msm/gpiomux.h
@@ -73,16 +73,6 @@ extern struct msm_gpiomux_config msm_gpiomux_configs[GPIOMUX_NGPIOS];
 int msm_gpiomux_write(unsigned gpio,
 		      gpiomux_config_t active,
 		      gpiomux_config_t suspended);
-
-/* Architecture-internal function for use by the framework only.
- * This function can assume the following:
- * - the gpio value has passed a bounds-check
- * - the gpiomux spinlock has been obtained
- *
- * This function is not for public consumption.  External users
- * should use msm_gpiomux_write.
- */
-void __msm_gpiomux_write(unsigned gpio, gpiomux_config_t val);
 #else
 static inline int msm_gpiomux_write(unsigned gpio,
 				    gpiomux_config_t active,
diff --git a/arch/arm/mach-omap2/dss-common.c b/arch/arm/mach-omap2/dss-common.c
index 393aeefaebb0..043e5705f2a6 100644
--- a/arch/arm/mach-omap2/dss-common.c
+++ b/arch/arm/mach-omap2/dss-common.c
@@ -42,7 +42,7 @@
 
 /* Using generic display panel */
 static struct tfp410_platform_data omap4_dvi_panel = {
-	.i2c_bus_num		= 3,
+	.i2c_bus_num		= 2,
 	.power_down_gpio	= PANDA_DVI_TFP410_POWER_DOWN_GPIO,
 };
 
diff --git a/arch/arm/mach-omap2/omap_device.c b/arch/arm/mach-omap2/omap_device.c
index 5cc92874be7e..f99f68e1e85b 100644
--- a/arch/arm/mach-omap2/omap_device.c
+++ b/arch/arm/mach-omap2/omap_device.c
@@ -129,6 +129,7 @@ static int omap_device_build_from_dt(struct platform_device *pdev)
 	struct device_node *node = pdev->dev.of_node;
 	const char *oh_name;
 	int oh_cnt, i, ret = 0;
+	bool device_active = false;
 
 	oh_cnt = of_property_count_strings(node, "ti,hwmods");
 	if (oh_cnt <= 0) {
@@ -152,6 +153,8 @@ static int omap_device_build_from_dt(struct platform_device *pdev)
 			goto odbfd_exit1;
 		}
 		hwmods[i] = oh;
+		if (oh->flags & HWMOD_INIT_NO_IDLE)
+			device_active = true;
 	}
 
 	od = omap_device_alloc(pdev, hwmods, oh_cnt);
@@ -172,6 +175,11 @@ static int omap_device_build_from_dt(struct platform_device *pdev)
 
 	pdev->dev.pm_domain = &omap_device_pm_domain;
 
+	if (device_active) {
+		omap_device_enable(pdev);
+		pm_runtime_set_active(&pdev->dev);
+	}
+
 odbfd_exit1:
 	kfree(hwmods);
 odbfd_exit:
@@ -842,6 +850,7 @@ static int __init omap_device_late_idle(struct device *dev, void *data)
 {
 	struct platform_device *pdev = to_platform_device(dev);
 	struct omap_device *od = to_omap_device(pdev);
+	int i;
 
 	if (!od)
 		return 0;
@@ -850,6 +859,15 @@ static int __init omap_device_late_idle(struct device *dev, void *data)
 	 * If omap_device state is enabled, but has no driver bound,
 	 * idle it.
 	 */
+
+	/*
+	 * Some devices (like memory controllers) are always kept
+	 * enabled, and should not be idled even with no drivers.
+	 */
+	for (i = 0; i < od->hwmods_cnt; i++)
+		if (od->hwmods[i]->flags & HWMOD_INIT_NO_IDLE)
+			return 0;
+
 	if (od->_driver_status != BUS_NOTIFY_BOUND_DRIVER) {
 		if (od->_state == OMAP_DEVICE_STATE_ENABLED) {
 			dev_warn(dev, "%s: enabled but no driver.  Idling\n",
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index 7341eff63f56..7f4db12b1459 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -2386,7 +2386,7 @@ static void __init _init_mpu_rt_base(struct omap_hwmod *oh, void *data)
 
 		np = of_dev_hwmod_lookup(of_find_node_by_name(NULL, "ocp"), oh);
 		if (np)
-			va_start = of_iomap(np, 0);
+			va_start = of_iomap(np, oh->mpu_rt_idx);
 	} else {
 		va_start = ioremap(mem->pa_start, mem->pa_end - mem->pa_start);
 	}
diff --git a/arch/arm/mach-omap2/omap_hwmod.h b/arch/arm/mach-omap2/omap_hwmod.h
index aab33fd814c0..e1482a9b3bc2 100644
--- a/arch/arm/mach-omap2/omap_hwmod.h
+++ b/arch/arm/mach-omap2/omap_hwmod.h
@@ -95,6 +95,54 @@ extern struct omap_hwmod_sysc_fields omap_hwmod_sysc_type3;
 #define MODULEMODE_HWCTRL		1
 #define MODULEMODE_SWCTRL		2
 
+#define DEBUG_OMAP2UART1_FLAGS	0
+#define DEBUG_OMAP2UART2_FLAGS	0
+#define DEBUG_OMAP2UART3_FLAGS	0
+#define DEBUG_OMAP3UART3_FLAGS	0
+#define DEBUG_OMAP3UART4_FLAGS	0
+#define DEBUG_OMAP4UART3_FLAGS	0
+#define DEBUG_OMAP4UART4_FLAGS	0
+#define DEBUG_TI81XXUART1_FLAGS	0
+#define DEBUG_TI81XXUART2_FLAGS	0
+#define DEBUG_TI81XXUART3_FLAGS	0
+#define DEBUG_AM33XXUART1_FLAGS	0
+
+#define DEBUG_OMAPUART_FLAGS	(HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET)
+
+#if defined(CONFIG_DEBUG_OMAP2UART1)
+#undef DEBUG_OMAP2UART1_FLAGS
+#define DEBUG_OMAP2UART1_FLAGS DEBUG_OMAPUART_FLAGS
+#elif defined(CONFIG_DEBUG_OMAP2UART2)
+#undef DEBUG_OMAP2UART2_FLAGS
+#define DEBUG_OMAP2UART2_FLAGS DEBUG_OMAPUART_FLAGS
+#elif defined(CONFIG_DEBUG_OMAP2UART3)
+#undef DEBUG_OMAP2UART3_FLAGS
+#define DEBUG_OMAP2UART3_FLAGS DEBUG_OMAPUART_FLAGS
+#elif defined(CONFIG_DEBUG_OMAP3UART3)
+#undef DEBUG_OMAP3UART3_FLAGS
+#define DEBUG_OMAP3UART3_FLAGS DEBUG_OMAPUART_FLAGS
+#elif defined(CONFIG_DEBUG_OMAP3UART4)
+#undef DEBUG_OMAP3UART4_FLAGS
+#define DEBUG_OMAP3UART4_FLAGS DEBUG_OMAPUART_FLAGS
+#elif defined(CONFIG_DEBUG_OMAP4UART3)
+#undef DEBUG_OMAP4UART3_FLAGS
+#define DEBUG_OMAP4UART3_FLAGS DEBUG_OMAPUART_FLAGS
+#elif defined(CONFIG_DEBUG_OMAP4UART4)
+#undef DEBUG_OMAP4UART4_FLAGS
+#define DEBUG_OMAP4UART4_FLAGS DEBUG_OMAPUART_FLAGS
+#elif defined(CONFIG_DEBUG_TI81XXUART1)
+#undef DEBUG_TI81XXUART1_FLAGS
+#define DEBUG_TI81XXUART1_FLAGS DEBUG_OMAPUART_FLAGS
+#elif defined(CONFIG_DEBUG_TI81XXUART2)
+#undef DEBUG_TI81XXUART2_FLAGS
+#define DEBUG_TI81XXUART2_FLAGS DEBUG_OMAPUART_FLAGS
+#elif defined(CONFIG_DEBUG_TI81XXUART3)
+#undef DEBUG_TI81XXUART3_FLAGS
+#define DEBUG_TI81XXUART3_FLAGS DEBUG_OMAPUART_FLAGS
+#elif defined(CONFIG_DEBUG_AM33XXUART1)
+#undef DEBUG_AM33XXUART1_FLAGS
+#define DEBUG_AM33XXUART1_FLAGS DEBUG_OMAPUART_FLAGS
+#endif
 
 /**
  * struct omap_hwmod_mux_info - hwmod specific mux configuration
@@ -568,6 +616,7 @@ struct omap_hwmod_link {
  * @voltdm: pointer to voltage domain (filled in at runtime)
  * @dev_attr: arbitrary device attributes that can be passed to the driver
  * @_sysc_cache: internal-use hwmod flags
+ * @mpu_rt_idx: index of device address space for register target (for DT boot)
  * @_mpu_rt_va: cached register target start address (internal use)
  * @_mpu_port: cached MPU register target slave (internal use)
  * @opt_clks_cnt: number of @opt_clks
@@ -617,6 +666,7 @@ struct omap_hwmod {
 	struct list_head		node;
 	struct omap_hwmod_ocp_if	*_mpu_port;
 	u16				flags;
+	u8				mpu_rt_idx;
 	u8				response_lat;
 	u8				rst_lines_cnt;
 	u8				opt_clks_cnt;
diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c
index d05fc7b54567..56cebb05509e 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c
@@ -512,7 +512,7 @@ struct omap_hwmod omap2xxx_uart1_hwmod = {
 	.mpu_irqs	= omap2_uart1_mpu_irqs,
 	.sdma_reqs	= omap2_uart1_sdma_reqs,
 	.main_clk	= "uart1_fck",
-	.flags		= HWMOD_SWSUP_SIDLE_ACT,
+	.flags		= DEBUG_OMAP2UART1_FLAGS | HWMOD_SWSUP_SIDLE_ACT,
 	.prcm		= {
 		.omap2 = {
 			.module_offs = CORE_MOD,
@@ -532,7 +532,7 @@ struct omap_hwmod omap2xxx_uart2_hwmod = {
 	.mpu_irqs	= omap2_uart2_mpu_irqs,
 	.sdma_reqs	= omap2_uart2_sdma_reqs,
 	.main_clk	= "uart2_fck",
-	.flags		= HWMOD_SWSUP_SIDLE_ACT,
+	.flags		= DEBUG_OMAP2UART2_FLAGS | HWMOD_SWSUP_SIDLE_ACT,
 	.prcm		= {
 		.omap2 = {
 			.module_offs = CORE_MOD,
@@ -552,7 +552,7 @@ struct omap_hwmod omap2xxx_uart3_hwmod = {
 	.mpu_irqs	= omap2_uart3_mpu_irqs,
 	.sdma_reqs	= omap2_uart3_sdma_reqs,
 	.main_clk	= "uart3_fck",
-	.flags		= HWMOD_SWSUP_SIDLE_ACT,
+	.flags		= DEBUG_OMAP2UART3_FLAGS | HWMOD_SWSUP_SIDLE_ACT,
 	.prcm		= {
 		.omap2 = {
 			.module_offs = CORE_MOD,
diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c
index 28bbd56346a9..eb2f3b93b51c 100644
--- a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c
@@ -562,6 +562,7 @@ static struct omap_hwmod am33xx_cpgmac0_hwmod = {
 	.clkdm_name	= "cpsw_125mhz_clkdm",
 	.flags		= (HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY),
 	.main_clk	= "cpsw_125mhz_gclk",
+	.mpu_rt_idx	= 1,
 	.prcm		= {
 		.omap4	= {
 			.clkctrl_offs	= AM33XX_CM_PER_CPGMAC0_CLKCTRL_OFFSET,
@@ -1512,7 +1513,7 @@ static struct omap_hwmod am33xx_uart1_hwmod = {
 	.name		= "uart1",
 	.class		= &uart_class,
 	.clkdm_name	= "l4_wkup_clkdm",
-	.flags		= HWMOD_SWSUP_SIDLE_ACT,
+	.flags		= DEBUG_AM33XXUART1_FLAGS | HWMOD_SWSUP_SIDLE_ACT,
 	.main_clk	= "dpll_per_m2_div4_wkupdm_ck",
 	.prcm		= {
 		.omap4	= {
diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
index f7a3df2fb579..0c3a427da544 100644
--- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
@@ -490,7 +490,7 @@ static struct omap_hwmod omap3xxx_uart1_hwmod = {
 	.mpu_irqs	= omap2_uart1_mpu_irqs,
 	.sdma_reqs	= omap2_uart1_sdma_reqs,
 	.main_clk	= "uart1_fck",
-	.flags		= HWMOD_SWSUP_SIDLE_ACT,
+	.flags		= DEBUG_TI81XXUART1_FLAGS | HWMOD_SWSUP_SIDLE_ACT,
 	.prcm		= {
 		.omap2 = {
 			.module_offs = CORE_MOD,
@@ -509,7 +509,7 @@ static struct omap_hwmod omap3xxx_uart2_hwmod = {
 	.mpu_irqs	= omap2_uart2_mpu_irqs,
 	.sdma_reqs	= omap2_uart2_sdma_reqs,
 	.main_clk	= "uart2_fck",
-	.flags		= HWMOD_SWSUP_SIDLE_ACT,
+	.flags		= DEBUG_TI81XXUART2_FLAGS | HWMOD_SWSUP_SIDLE_ACT,
 	.prcm		= {
 		.omap2 = {
 			.module_offs = CORE_MOD,
@@ -528,7 +528,8 @@ static struct omap_hwmod omap3xxx_uart3_hwmod = {
 	.mpu_irqs	= omap2_uart3_mpu_irqs,
 	.sdma_reqs	= omap2_uart3_sdma_reqs,
 	.main_clk	= "uart3_fck",
-	.flags		= HWMOD_SWSUP_SIDLE_ACT,
+	.flags		= DEBUG_OMAP3UART3_FLAGS | DEBUG_TI81XXUART3_FLAGS |
+				HWMOD_SWSUP_SIDLE_ACT,
 	.prcm		= {
 		.omap2 = {
 			.module_offs = OMAP3430_PER_MOD,
@@ -558,7 +559,7 @@ static struct omap_hwmod omap36xx_uart4_hwmod = {
 	.mpu_irqs	= uart4_mpu_irqs,
 	.sdma_reqs	= uart4_sdma_reqs,
 	.main_clk	= "uart4_fck",
-	.flags		= HWMOD_SWSUP_SIDLE_ACT,
+	.flags		= DEBUG_OMAP3UART4_FLAGS | HWMOD_SWSUP_SIDLE_ACT,
 	.prcm		= {
 		.omap2 = {
 			.module_offs = OMAP3430_PER_MOD,
diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
index d04b5e60fdbe..9c3b504477d7 100644
--- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
@@ -2858,8 +2858,7 @@ static struct omap_hwmod omap44xx_uart3_hwmod = {
 	.name		= "uart3",
 	.class		= &omap44xx_uart_hwmod_class,
 	.clkdm_name	= "l4_per_clkdm",
-	.flags		= HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET |
-				HWMOD_SWSUP_SIDLE_ACT,
+	.flags		= DEBUG_OMAP4UART3_FLAGS | HWMOD_SWSUP_SIDLE_ACT,
 	.main_clk	= "func_48m_fclk",
 	.prcm = {
 		.omap4 = {
@@ -2875,7 +2874,7 @@ static struct omap_hwmod omap44xx_uart4_hwmod = {
 	.name		= "uart4",
 	.class		= &omap44xx_uart_hwmod_class,
 	.clkdm_name	= "l4_per_clkdm",
-	.flags		= HWMOD_SWSUP_SIDLE_ACT,
+	.flags		= DEBUG_OMAP4UART4_FLAGS | HWMOD_SWSUP_SIDLE_ACT,
 	.main_clk	= "func_48m_fclk",
 	.prcm = {
 		.omap4 = {
diff --git a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c
index f37ae96b70a1..3c70f5c1860f 100644
--- a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c
@@ -1375,7 +1375,7 @@ static struct omap_hwmod omap54xx_uart3_hwmod = {
 	.name		= "uart3",
 	.class		= &omap54xx_uart_hwmod_class,
 	.clkdm_name	= "l4per_clkdm",
-	.flags		= HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET,
+	.flags		= DEBUG_OMAP4UART3_FLAGS,
 	.main_clk	= "func_48m_fclk",
 	.prcm = {
 		.omap4 = {
@@ -1391,6 +1391,7 @@ static struct omap_hwmod omap54xx_uart4_hwmod = {
 	.name		= "uart4",
 	.class		= &omap54xx_uart_hwmod_class,
 	.clkdm_name	= "l4per_clkdm",
+	.flags		= DEBUG_OMAP4UART4_FLAGS,
 	.main_clk	= "func_48m_fclk",
 	.prcm = {
 		.omap4 = {
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index 3a674de6cb63..a388f8c1bcb3 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -208,17 +208,6 @@ static int __init omap_serial_early_init(void)
 				pr_info("%s used as console in debug mode: uart%d clocks will not be gated",
 					uart_name, uart->num);
 			}
-
-			/*
-			 * omap-uart can be used for earlyprintk logs
-			 * So if omap-uart is used as console then prevent
-			 * uart reset and idle to get logs from omap-uart
-			 * until uart console driver is available to take
-			 * care for console messages.
-			 * Idling or resetting omap-uart while printing logs
-			 * early boot logs can stall the boot-up.
-			 */
-			oh->flags |= HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET;
 		}
 	} while (1);
 
diff --git a/arch/arm/mach-shmobile/board-armadillo800eva.c b/arch/arm/mach-shmobile/board-armadillo800eva.c
index e115f6742107..c5be60d85e4b 100644
--- a/arch/arm/mach-shmobile/board-armadillo800eva.c
+++ b/arch/arm/mach-shmobile/board-armadillo800eva.c
@@ -1162,9 +1162,6 @@ static void __init eva_init(void)
 	gpio_request_one(61, GPIOF_OUT_INIT_HIGH, NULL); /* LCDDON */
 	gpio_request_one(202, GPIOF_OUT_INIT_LOW, NULL); /* LCD0_LED_CONT */
 
-	/* Touchscreen */
-	gpio_request_one(166, GPIOF_OUT_INIT_HIGH, NULL); /* TP_RST_B */
-
 	/* GETHER */
 	gpio_request_one(18, GPIOF_OUT_INIT_HIGH, NULL); /* PHY_RST */
 
diff --git a/arch/arm/mach-shmobile/board-bockw.c b/arch/arm/mach-shmobile/board-bockw.c
index d5554646916c..3354a85c90f7 100644
--- a/arch/arm/mach-shmobile/board-bockw.c
+++ b/arch/arm/mach-shmobile/board-bockw.c
@@ -167,7 +167,13 @@ static const struct pinctrl_map bockw_pinctrl_map[] = {
 				  "usb1", "usb1"),
 	/* SDHI0 */
 	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7778",
-				  "sdhi0", "sdhi0"),
+				  "sdhi0_data4", "sdhi0"),
+	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7778",
+				  "sdhi0_ctrl", "sdhi0"),
+	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7778",
+				  "sdhi0_cd", "sdhi0"),
+	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7778",
+				  "sdhi0_wp", "sdhi0"),
 };
 
 #define FPGA	0x18200000
diff --git a/arch/arm/mach-shmobile/board-lager.c b/arch/arm/mach-shmobile/board-lager.c
index d73e21d3ea8a..8d6bd5c5efb9 100644
--- a/arch/arm/mach-shmobile/board-lager.c
+++ b/arch/arm/mach-shmobile/board-lager.c
@@ -59,7 +59,7 @@ static __initdata struct gpio_led_platform_data lager_leds_pdata = {
 #define GPIO_KEY(c, g, d, ...) \
 	{ .code = c, .gpio = g, .desc = d, .active_low = 1 }
 
-static __initdata struct gpio_keys_button gpio_buttons[] = {
+static struct gpio_keys_button gpio_buttons[] = {
 	GPIO_KEY(KEY_4,		RCAR_GP_PIN(1, 28),	"SW2-pin4"),
 	GPIO_KEY(KEY_3,		RCAR_GP_PIN(1, 26),	"SW2-pin3"),
 	GPIO_KEY(KEY_2,		RCAR_GP_PIN(1, 24),	"SW2-pin2"),
diff --git a/arch/arm/mach-sti/headsmp.S b/arch/arm/mach-sti/headsmp.S
index 78ebc7559f53..4c09bae86edf 100644
--- a/arch/arm/mach-sti/headsmp.S
+++ b/arch/arm/mach-sti/headsmp.S
@@ -16,8 +16,6 @@
 #include <linux/linkage.h>
 #include <linux/init.h>
 
-	__INIT
-
 /*
  * ST specific entry point for secondary CPUs.  This provides
  * a "holding pen" into which all secondary cores are held until we're
diff --git a/arch/avr32/boards/atngw100/mrmt.c b/arch/avr32/boards/atngw100/mrmt.c
index f91431963452..7de083d19b7e 100644
--- a/arch/avr32/boards/atngw100/mrmt.c
+++ b/arch/avr32/boards/atngw100/mrmt.c
@@ -150,7 +150,6 @@ static struct ac97c_platform_data __initdata ac97c0_data = {
 static struct platform_device rmt_ts_device = {
 	.name	= "ucb1400_ts",
 	.id	= -1,
-	}
 };
 #endif
 
diff --git a/arch/powerpc/boot/dts/ac14xx.dts b/arch/powerpc/boot/dts/ac14xx.dts
index a27a4609bb42..a543c4088cba 100644
--- a/arch/powerpc/boot/dts/ac14xx.dts
+++ b/arch/powerpc/boot/dts/ac14xx.dts
@@ -10,7 +10,7 @@
  */
 
 
-/include/ "mpc5121.dtsi"
+#include <mpc5121.dtsi>
 
 / {
 	model = "ac14xx";
diff --git a/arch/powerpc/boot/dts/include/dt-bindings b/arch/powerpc/boot/dts/include/dt-bindings
new file mode 120000
index 000000000000..08c00e4972fa
--- /dev/null
+++ b/arch/powerpc/boot/dts/include/dt-bindings
@@ -0,0 +1 @@
+../../../../../include/dt-bindings
\ No newline at end of file
diff --git a/arch/powerpc/boot/dts/mpc5121ads.dts b/arch/powerpc/boot/dts/mpc5121ads.dts
index 7d3cb79185cb..c228a0a232a6 100644
--- a/arch/powerpc/boot/dts/mpc5121ads.dts
+++ b/arch/powerpc/boot/dts/mpc5121ads.dts
@@ -9,7 +9,7 @@
  * option) any later version.
  */
 
-/include/ "mpc5121.dtsi"
+#include <mpc5121.dtsi>
 
 / {
 	model = "mpc5121ads";
diff --git a/arch/powerpc/boot/dts/pdm360ng.dts b/arch/powerpc/boot/dts/pdm360ng.dts
index 74337403faee..871c16d1ad5e 100644
--- a/arch/powerpc/boot/dts/pdm360ng.dts
+++ b/arch/powerpc/boot/dts/pdm360ng.dts
@@ -13,7 +13,7 @@
  * option) any later version.
  */
 
-/include/ "mpc5121.dtsi"
+#include <mpc5121.dtsi>
 
 / {
 	model = "pdm360ng";
diff --git a/arch/powerpc/include/asm/mpc5121.h b/arch/powerpc/include/asm/mpc5121.h
index 8ae133eaf9fa..887d3d6133e3 100644
--- a/arch/powerpc/include/asm/mpc5121.h
+++ b/arch/powerpc/include/asm/mpc5121.h
@@ -32,25 +32,11 @@ struct mpc512x_ccm {
 	u32	scfr2;	/* System Clock Frequency Register 2 */
 	u32	scfr2s;	/* System Clock Frequency Shadow Register 2 */
 	u32	bcr;	/* Bread Crumb Register */
-	u32	p0ccr;	/* PSC0 Clock Control Register */
-	u32	p1ccr;	/* PSC1 CCR */
-	u32	p2ccr;	/* PSC2 CCR */
-	u32	p3ccr;	/* PSC3 CCR */
-	u32	p4ccr;	/* PSC4 CCR */
-	u32	p5ccr;	/* PSC5 CCR */
-	u32	p6ccr;	/* PSC6 CCR */
-	u32	p7ccr;	/* PSC7 CCR */
-	u32	p8ccr;	/* PSC8 CCR */
-	u32	p9ccr;	/* PSC9 CCR */
-	u32	p10ccr;	/* PSC10 CCR */
-	u32	p11ccr;	/* PSC11 CCR */
+	u32	psc_ccr[12];	/* PSC Clock Control Registers */
 	u32	spccr;	/* SPDIF Clock Control Register */
 	u32	cccr;	/* CFM Clock Control Register */
 	u32	dccr;	/* DIU Clock Control Register */
-	u32	m1ccr;	/* MSCAN1 CCR */
-	u32	m2ccr;	/* MSCAN2 CCR */
-	u32	m3ccr;	/* MSCAN3 CCR */
-	u32	m4ccr;	/* MSCAN4 CCR */
+	u32	mscan_ccr[4];	/* MSCAN Clock Control Registers */
 	u8	res[0x98]; /* Reserved */
 };
 
diff --git a/arch/powerpc/platforms/52xx/mpc52xx_pic.c b/arch/powerpc/platforms/52xx/mpc52xx_pic.c
index b89ef65392dc..b69221ba07fd 100644
--- a/arch/powerpc/platforms/52xx/mpc52xx_pic.c
+++ b/arch/powerpc/platforms/52xx/mpc52xx_pic.c
@@ -373,8 +373,9 @@ static int mpc52xx_irqhost_map(struct irq_domain *h, unsigned int virq,
 	case MPC52xx_IRQ_L1_PERP: irqchip = &mpc52xx_periph_irqchip; break;
 	case MPC52xx_IRQ_L1_SDMA: irqchip = &mpc52xx_sdma_irqchip; break;
 	case MPC52xx_IRQ_L1_CRIT:
+	default:
 		pr_warn("%s: Critical IRQ #%d is unsupported! Nopping it.\n",
-			__func__, l2irq);
+			__func__, l1irq);
 		irq_set_chip(virq, &no_irq_chip);
 		return 0;
 	}
diff --git a/arch/s390/kvm/kvm-s390.c b/arch/s390/kvm/kvm-s390.c
index ba694d2ba51e..34c1c9a90be2 100644
--- a/arch/s390/kvm/kvm-s390.c
+++ b/arch/s390/kvm/kvm-s390.c
@@ -702,14 +702,25 @@ static int __vcpu_run(struct kvm_vcpu *vcpu)
 		return rc;
 
 	vcpu->arch.sie_block->icptcode = 0;
-	preempt_disable();
-	kvm_guest_enter();
-	preempt_enable();
 	VCPU_EVENT(vcpu, 6, "entering sie flags %x",
 		   atomic_read(&vcpu->arch.sie_block->cpuflags));
 	trace_kvm_s390_sie_enter(vcpu,
 				 atomic_read(&vcpu->arch.sie_block->cpuflags));
+
+	/*
+	 * As PF_VCPU will be used in fault handler, between guest_enter
+	 * and guest_exit should be no uaccess.
+	 */
+	preempt_disable();
+	kvm_guest_enter();
+	preempt_enable();
 	rc = sie64a(vcpu->arch.sie_block, vcpu->run->s.regs.gprs);
+	kvm_guest_exit();
+
+	VCPU_EVENT(vcpu, 6, "exit sie icptcode %d",
+		   vcpu->arch.sie_block->icptcode);
+	trace_kvm_s390_sie_exit(vcpu, vcpu->arch.sie_block->icptcode);
+
 	if (rc > 0)
 		rc = 0;
 	if (rc < 0) {
@@ -721,10 +732,6 @@ static int __vcpu_run(struct kvm_vcpu *vcpu)
 			rc = kvm_s390_inject_program_int(vcpu, PGM_ADDRESSING);
 		}
 	}
-	VCPU_EVENT(vcpu, 6, "exit sie icptcode %d",
-		   vcpu->arch.sie_block->icptcode);
-	trace_kvm_s390_sie_exit(vcpu, vcpu->arch.sie_block->icptcode);
-	kvm_guest_exit();
 
 	memcpy(&vcpu->run->s.regs.gprs[14], &vcpu->arch.sie_block->gg14, 16);
 	return rc;
diff --git a/arch/s390/kvm/priv.c b/arch/s390/kvm/priv.c
index 0da3e6eb6be6..4cdc54e63ebc 100644
--- a/arch/s390/kvm/priv.c
+++ b/arch/s390/kvm/priv.c
@@ -16,6 +16,7 @@
 #include <linux/errno.h>
 #include <linux/compat.h>
 #include <asm/asm-offsets.h>
+#include <asm/facility.h>
 #include <asm/current.h>
 #include <asm/debug.h>
 #include <asm/ebcdic.h>
@@ -532,8 +533,7 @@ static int handle_pfmf(struct kvm_vcpu *vcpu)
 		return kvm_s390_inject_program_int(vcpu, PGM_SPECIFICATION);
 
 	/* Only provide non-quiescing support if the host supports it */
-	if (vcpu->run->s.regs.gprs[reg1] & PFMF_NQ &&
-	    S390_lowcore.stfl_fac_list & 0x00020000)
+	if (vcpu->run->s.regs.gprs[reg1] & PFMF_NQ && !test_facility(14))
 		return kvm_s390_inject_program_int(vcpu, PGM_SPECIFICATION);
 
 	/* No support for conditional-SSKE */