Merge branch 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull x86 core updates from Ingo Molnar:
 "Note that in this cycle most of the x86 topics interacted at a level
  that caused them to be merged into tip:x86/asm - but this should be a
  temporary phenomenon, hopefully we'll back to the usual patterns in
  the next merge window.

  The main changes in this cycle were:

  Hardware enablement:

   - Add support for the Intel UMIP (User Mode Instruction Prevention)
     CPU feature. This is a security feature that disables certain
     instructions such as SGDT, SLDT, SIDT, SMSW and STR. (Ricardo Neri)

     [ Note that this is disabled by default for now, there are some
       smaller enhancements in the pipeline that I'll follow up with in
       the next 1-2 days, which allows this to be enabled by default.]

   - Add support for the AMD SEV (Secure Encrypted Virtualization) CPU
     feature, on top of SME (Secure Memory Encryption) support that was
     added in v4.14. (Tom Lendacky, Brijesh Singh)

   - Enable new SSE/AVX/AVX512 CPU features: AVX512_VBMI2, GFNI, VAES,
     VPCLMULQDQ, AVX512_VNNI, AVX512_BITALG. (Gayatri Kammela)

  Other changes:

   - A big series of entry code simplifications and enhancements (Andy
     Lutomirski)

   - Make the ORC unwinder default on x86 and various objtool
     enhancements. (Josh Poimboeuf)

   - 5-level paging enhancements (Kirill A. Shutemov)

   - Micro-optimize the entry code a bit (Borislav Petkov)

   - Improve the handling of interdependent CPU features in the early
     FPU init code (Andi Kleen)

   - Build system enhancements (Changbin Du, Masahiro Yamada)

   - ... plus misc enhancements, fixes and cleanups"

* 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (118 commits)
  x86/build: Make the boot image generation less verbose
  selftests/x86: Add tests for the STR and SLDT instructions
  selftests/x86: Add tests for User-Mode Instruction Prevention
  x86/traps: Fix up general protection faults caused by UMIP
  x86/umip: Enable User-Mode Instruction Prevention at runtime
  x86/umip: Force a page fault when unable to copy emulated result to user
  x86/umip: Add emulation code for UMIP instructions
  x86/cpufeature: Add User-Mode Instruction Prevention definitions
  x86/insn-eval: Add support to resolve 16-bit address encodings
  x86/insn-eval: Handle 32-bit address encodings in virtual-8086 mode
  x86/insn-eval: Add wrapper function for 32 and 64-bit addresses
  x86/insn-eval: Add support to resolve 32-bit address encodings
  x86/insn-eval: Compute linear address in several utility functions
  resource: Fix resource_size.cocci warnings
  X86/KVM: Clear encryption attribute when SEV is active
  X86/KVM: Decrypt shared per-cpu variables when SEV is active
  percpu: Introduce DEFINE_PER_CPU_DECRYPTED
  x86: Add support for changing memory encryption attribute in early boot
  x86/io: Unroll string I/O when SEV is active
  x86/boot: Add early boot support when running with SEV active
  ...

2 files changed, 1365 insertions, 1 deletions

diff --git a/arch/x86/lib/Makefile b/arch/x86/lib/Makefile
index 457f681ef379..7b181b61170e 100644
--- a/arch/x86/lib/Makefile
+++ b/arch/x86/lib/Makefile
@@ -24,7 +24,7 @@ lib-y := delay.o misc.o cmdline.o cpu.o
 lib-y += usercopy_$(BITS).o usercopy.o getuser.o putuser.o
 lib-y += memcpy_$(BITS).o
 lib-$(CONFIG_RWSEM_XCHGADD_ALGORITHM) += rwsem.o
-lib-$(CONFIG_INSTRUCTION_DECODER) += insn.o inat.o
+lib-$(CONFIG_INSTRUCTION_DECODER) += insn.o inat.o insn-eval.o
 lib-$(CONFIG_RANDOMIZE_BASE) += kaslr.o
 
 obj-y += msr.o msr-reg.o msr-reg-export.o hweight.o
diff --git a/arch/x86/lib/insn-eval.c b/arch/x86/lib/insn-eval.c
new file mode 100644
index 000000000000..35625d279458
--- /dev/null
+++ b/arch/x86/lib/insn-eval.c
@@ -0,0 +1,1364 @@
+/*
+ * Utility functions for x86 operand and address decoding
+ *
+ * Copyright (C) Intel Corporation 2017
+ */
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/ratelimit.h>
+#include <linux/mmu_context.h>
+#include <asm/desc_defs.h>
+#include <asm/desc.h>
+#include <asm/inat.h>
+#include <asm/insn.h>
+#include <asm/insn-eval.h>
+#include <asm/ldt.h>
+#include <asm/vm86.h>
+
+#undef pr_fmt
+#define pr_fmt(fmt) "insn: " fmt
+
+enum reg_type {
+	REG_TYPE_RM = 0,
+	REG_TYPE_INDEX,
+	REG_TYPE_BASE,
+};
+
+/**
+ * is_string_insn() - Determine if instruction is a string instruction
+ * @insn:	Instruction containing the opcode to inspect
+ *
+ * Returns:
+ *
+ * true if the instruction, determined by the opcode, is any of the
+ * string instructions as defined in the Intel Software Development manual.
+ * False otherwise.
+ */
+static bool is_string_insn(struct insn *insn)
+{
+	insn_get_opcode(insn);
+
+	/* All string instructions have a 1-byte opcode. */
+	if (insn->opcode.nbytes != 1)
+		return false;
+
+	switch (insn->opcode.bytes[0]) {
+	case 0x6c ... 0x6f:	/* INS, OUTS */
+	case 0xa4 ... 0xa7:	/* MOVS, CMPS */
+	case 0xaa ... 0xaf:	/* STOS, LODS, SCAS */
+		return true;
+	default:
+		return false;
+	}
+}
+
+/**
+ * get_seg_reg_override_idx() - obtain segment register override index
+ * @insn:	Valid instruction with segment override prefixes
+ *
+ * Inspect the instruction prefixes in @insn and find segment overrides, if any.
+ *
+ * Returns:
+ *
+ * A constant identifying the segment register to use, among CS, SS, DS,
+ * ES, FS, or GS. INAT_SEG_REG_DEFAULT is returned if no segment override
+ * prefixes were found.
+ *
+ * -EINVAL in case of error.
+ */
+static int get_seg_reg_override_idx(struct insn *insn)
+{
+	int idx = INAT_SEG_REG_DEFAULT;
+	int num_overrides = 0, i;
+
+	insn_get_prefixes(insn);
+
+	/* Look for any segment override prefixes. */
+	for (i = 0; i < insn->prefixes.nbytes; i++) {
+		insn_attr_t attr;
+
+		attr = inat_get_opcode_attribute(insn->prefixes.bytes[i]);
+		switch (attr) {
+		case INAT_MAKE_PREFIX(INAT_PFX_CS):
+			idx = INAT_SEG_REG_CS;
+			num_overrides++;
+			break;
+		case INAT_MAKE_PREFIX(INAT_PFX_SS):
+			idx = INAT_SEG_REG_SS;
+			num_overrides++;
+			break;
+		case INAT_MAKE_PREFIX(INAT_PFX_DS):
+			idx = INAT_SEG_REG_DS;
+			num_overrides++;
+			break;
+		case INAT_MAKE_PREFIX(INAT_PFX_ES):
+			idx = INAT_SEG_REG_ES;
+			num_overrides++;
+			break;
+		case INAT_MAKE_PREFIX(INAT_PFX_FS):
+			idx = INAT_SEG_REG_FS;
+			num_overrides++;
+			break;
+		case INAT_MAKE_PREFIX(INAT_PFX_GS):
+			idx = INAT_SEG_REG_GS;
+			num_overrides++;
+			break;
+		/* No default action needed. */
+		}
+	}
+
+	/* More than one segment override prefix leads to undefined behavior. */
+	if (num_overrides > 1)
+		return -EINVAL;
+
+	return idx;
+}
+
+/**
+ * check_seg_overrides() - check if segment override prefixes are allowed
+ * @insn:	Valid instruction with segment override prefixes
+ * @regoff:	Operand offset, in pt_regs, for which the check is performed
+ *
+ * For a particular register used in register-indirect addressing, determine if
+ * segment override prefixes can be used. Specifically, no overrides are allowed
+ * for rDI if used with a string instruction.
+ *
+ * Returns:
+ *
+ * True if segment override prefixes can be used with the register indicated
+ * in @regoff. False if otherwise.
+ */
+static bool check_seg_overrides(struct insn *insn, int regoff)
+{
+	if (regoff == offsetof(struct pt_regs, di) && is_string_insn(insn))
+		return false;
+
+	return true;
+}
+
+/**
+ * resolve_default_seg() - resolve default segment register index for an operand
+ * @insn:	Instruction with opcode and address size. Must be valid.
+ * @regs:	Register values as seen when entering kernel mode
+ * @off:	Operand offset, in pt_regs, for which resolution is needed
+ *
+ * Resolve the default segment register index associated with the instruction
+ * operand register indicated by @off. Such index is resolved based on defaults
+ * described in the Intel Software Development Manual.
+ *
+ * Returns:
+ *
+ * If in protected mode, a constant identifying the segment register to use,
+ * among CS, SS, ES or DS. If in long mode, INAT_SEG_REG_IGNORE.
+ *
+ * -EINVAL in case of error.
+ */
+static int resolve_default_seg(struct insn *insn, struct pt_regs *regs, int off)
+{
+	if (user_64bit_mode(regs))
+		return INAT_SEG_REG_IGNORE;
+	/*
+	 * Resolve the default segment register as described in Section 3.7.4
+	 * of the Intel Software Development Manual Vol. 1:
+	 *
+	 *  + DS for all references involving r[ABCD]X, and rSI.
+	 *  + If used in a string instruction, ES for rDI. Otherwise, DS.
+	 *  + AX, CX and DX are not valid register operands in 16-bit address
+	 *    encodings but are valid for 32-bit and 64-bit encodings.
+	 *  + -EDOM is reserved to identify for cases in which no register
+	 *    is used (i.e., displacement-only addressing). Use DS.
+	 *  + SS for rSP or rBP.
+	 *  + CS for rIP.
+	 */
+
+	switch (off) {
+	case offsetof(struct pt_regs, ax):
+	case offsetof(struct pt_regs, cx):
+	case offsetof(struct pt_regs, dx):
+		/* Need insn to verify address size. */
+		if (insn->addr_bytes == 2)
+			return -EINVAL;
+
+	case -EDOM:
+	case offsetof(struct pt_regs, bx):
+	case offsetof(struct pt_regs, si):
+		return INAT_SEG_REG_DS;
+
+	case offsetof(struct pt_regs, di):
+		if (is_string_insn(insn))
+			return INAT_SEG_REG_ES;
+		return INAT_SEG_REG_DS;
+
+	case offsetof(struct pt_regs, bp):
+	case offsetof(struct pt_regs, sp):
+		return INAT_SEG_REG_SS;
+
+	case offsetof(struct pt_regs, ip):
+		return INAT_SEG_REG_CS;
+
+	default:
+		return -EINVAL;
+	}
+}
+
+/**
+ * resolve_seg_reg() - obtain segment register index
+ * @insn:	Instruction with operands
+ * @regs:	Register values as seen when entering kernel mode
+ * @regoff:	Operand offset, in pt_regs, used to deterimine segment register
+ *
+ * Determine the segment register associated with the operands and, if
+ * applicable, prefixes and the instruction pointed by @insn.
+ *
+ * The segment register associated to an operand used in register-indirect
+ * addressing depends on:
+ *
+ * a) Whether running in long mode (in such a case segments are ignored, except
+ * if FS or GS are used).
+ *
+ * b) Whether segment override prefixes can be used. Certain instructions and
+ *    registers do not allow override prefixes.
+ *
+ * c) Whether segment overrides prefixes are found in the instruction prefixes.
+ *
+ * d) If there are not segment override prefixes or they cannot be used, the
+ *    default segment register associated with the operand register is used.
+ *
+ * The function checks first if segment override prefixes can be used with the
+ * operand indicated by @regoff. If allowed, obtain such overridden segment
+ * register index. Lastly, if not prefixes were found or cannot be used, resolve
+ * the segment register index to use based on the defaults described in the
+ * Intel documentation. In long mode, all segment register indexes will be
+ * ignored, except if overrides were found for FS or GS. All these operations
+ * are done using helper functions.
+ *
+ * The operand register, @regoff, is represented as the offset from the base of
+ * pt_regs.
+ *
+ * As stated, the main use of this function is to determine the segment register
+ * index based on the instruction, its operands and prefixes. Hence, @insn
+ * must be valid. However, if @regoff indicates rIP, we don't need to inspect
+ * @insn at all as in this case CS is used in all cases. This case is checked
+ * before proceeding further.
+ *
+ * Please note that this function does not return the value in the segment
+ * register (i.e., the segment selector) but our defined index. The segment
+ * selector needs to be obtained using get_segment_selector() and passing the
+ * segment register index resolved by this function.
+ *
+ * Returns:
+ *
+ * An index identifying the segment register to use, among CS, SS, DS,
+ * ES, FS, or GS. INAT_SEG_REG_IGNORE is returned if running in long mode.
+ *
+ * -EINVAL in case of error.
+ */
+static int resolve_seg_reg(struct insn *insn, struct pt_regs *regs, int regoff)
+{
+	int idx;
+
+	/*
+	 * In the unlikely event of having to resolve the segment register
+	 * index for rIP, do it first. Segment override prefixes should not
+	 * be used. Hence, it is not necessary to inspect the instruction,
+	 * which may be invalid at this point.
+	 */
+	if (regoff == offsetof(struct pt_regs, ip)) {
+		if (user_64bit_mode(regs))
+			return INAT_SEG_REG_IGNORE;
+		else
+			return INAT_SEG_REG_CS;
+	}
+
+	if (!insn)
+		return -EINVAL;
+
+	if (!check_seg_overrides(insn, regoff))
+		return resolve_default_seg(insn, regs, regoff);
+
+	idx = get_seg_reg_override_idx(insn);
+	if (idx < 0)
+		return idx;
+
+	if (idx == INAT_SEG_REG_DEFAULT)
+		return resolve_default_seg(insn, regs, regoff);
+
+	/*
+	 * In long mode, segment override prefixes are ignored, except for
+	 * overrides for FS and GS.
+	 */
+	if (user_64bit_mode(regs)) {
+		if (idx != INAT_SEG_REG_FS &&
+		    idx != INAT_SEG_REG_GS)
+			idx = INAT_SEG_REG_IGNORE;
+	}
+
+	return idx;
+}
+
+/**
+ * get_segment_selector() - obtain segment selector
+ * @regs:		Register values as seen when entering kernel mode
+ * @seg_reg_idx:	Segment register index to use
+ *
+ * Obtain the segment selector from any of the CS, SS, DS, ES, FS, GS segment
+ * registers. In CONFIG_X86_32, the segment is obtained from either pt_regs or
+ * kernel_vm86_regs as applicable. In CONFIG_X86_64, CS and SS are obtained
+ * from pt_regs. DS, ES, FS and GS are obtained by reading the actual CPU
+ * registers. This done for only for completeness as in CONFIG_X86_64 segment
+ * registers are ignored.
+ *
+ * Returns:
+ *
+ * Value of the segment selector, including null when running in
+ * long mode.
+ *
+ * -EINVAL on error.
+ */
+static short get_segment_selector(struct pt_regs *regs, int seg_reg_idx)
+{
+#ifdef CONFIG_X86_64
+	unsigned short sel;
+
+	switch (seg_reg_idx) {
+	case INAT_SEG_REG_IGNORE:
+		return 0;
+	case INAT_SEG_REG_CS:
+		return (unsigned short)(regs->cs & 0xffff);
+	case INAT_SEG_REG_SS:
+		return (unsigned short)(regs->ss & 0xffff);
+	case INAT_SEG_REG_DS:
+		savesegment(ds, sel);
+		return sel;
+	case INAT_SEG_REG_ES:
+		savesegment(es, sel);
+		return sel;
+	case INAT_SEG_REG_FS:
+		savesegment(fs, sel);
+		return sel;
+	case INAT_SEG_REG_GS:
+		savesegment(gs, sel);
+		return sel;
+	default:
+		return -EINVAL;
+	}
+#else /* CONFIG_X86_32 */
+	struct kernel_vm86_regs *vm86regs = (struct kernel_vm86_regs *)regs;
+
+	if (v8086_mode(regs)) {
+		switch (seg_reg_idx) {
+		case INAT_SEG_REG_CS:
+			return (unsigned short)(regs->cs & 0xffff);
+		case INAT_SEG_REG_SS:
+			return (unsigned short)(regs->ss & 0xffff);
+		case INAT_SEG_REG_DS:
+			return vm86regs->ds;
+		case INAT_SEG_REG_ES:
+			return vm86regs->es;
+		case INAT_SEG_REG_FS:
+			return vm86regs->fs;
+		case INAT_SEG_REG_GS:
+			return vm86regs->gs;
+		case INAT_SEG_REG_IGNORE:
+			/* fall through */
+		default:
+			return -EINVAL;
+		}
+	}
+
+	switch (seg_reg_idx) {
+	case INAT_SEG_REG_CS:
+		return (unsigned short)(regs->cs & 0xffff);
+	case INAT_SEG_REG_SS:
+		return (unsigned short)(regs->ss & 0xffff);
+	case INAT_SEG_REG_DS:
+		return (unsigned short)(regs->ds & 0xffff);
+	case INAT_SEG_REG_ES:
+		return (unsigned short)(regs->es & 0xffff);
+	case INAT_SEG_REG_FS:
+		return (unsigned short)(regs->fs & 0xffff);
+	case INAT_SEG_REG_GS:
+		/*
+		 * GS may or may not be in regs as per CONFIG_X86_32_LAZY_GS.
+		 * The macro below takes care of both cases.
+		 */
+		return get_user_gs(regs);
+	case INAT_SEG_REG_IGNORE:
+		/* fall through */
+	default:
+		return -EINVAL;
+	}
+#endif /* CONFIG_X86_64 */
+}
+
+static int get_reg_offset(struct insn *insn, struct pt_regs *regs,
+			  enum reg_type type)
+{
+	int regno = 0;
+
+	static const int regoff[] = {
+		offsetof(struct pt_regs, ax),
+		offsetof(struct pt_regs, cx),
+		offsetof(struct pt_regs, dx),
+		offsetof(struct pt_regs, bx),
+		offsetof(struct pt_regs, sp),
+		offsetof(struct pt_regs, bp),
+		offsetof(struct pt_regs, si),
+		offsetof(struct pt_regs, di),
+#ifdef CONFIG_X86_64
+		offsetof(struct pt_regs, r8),
+		offsetof(struct pt_regs, r9),
+		offsetof(struct pt_regs, r10),
+		offsetof(struct pt_regs, r11),
+		offsetof(struct pt_regs, r12),
+		offsetof(struct pt_regs, r13),
+		offsetof(struct pt_regs, r14),
+		offsetof(struct pt_regs, r15),
+#endif
+	};
+	int nr_registers = ARRAY_SIZE(regoff);
+	/*
+	 * Don't possibly decode a 32-bit instructions as
+	 * reading a 64-bit-only register.
+	 */
+	if (IS_ENABLED(CONFIG_X86_64) && !insn->x86_64)
+		nr_registers -= 8;
+
+	switch (type) {
+	case REG_TYPE_RM:
+		regno = X86_MODRM_RM(insn->modrm.value);
+
+		/*
+		 * ModRM.mod == 0 and ModRM.rm == 5 means a 32-bit displacement
+		 * follows the ModRM byte.
+		 */
+		if (!X86_MODRM_MOD(insn->modrm.value) && regno == 5)
+			return -EDOM;
+
+		if (X86_REX_B(insn->rex_prefix.value))
+			regno += 8;
+		break;
+
+	case REG_TYPE_INDEX:
+		regno = X86_SIB_INDEX(insn->sib.value);
+		if (X86_REX_X(insn->rex_prefix.value))
+			regno += 8;
+
+		/*
+		 * If ModRM.mod != 3 and SIB.index = 4 the scale*index
+		 * portion of the address computation is null. This is
+		 * true only if REX.X is 0. In such a case, the SIB index
+		 * is used in the address computation.
+		 */
+		if (X86_MODRM_MOD(insn->modrm.value) != 3 && regno == 4)
+			return -EDOM;
+		break;
+
+	case REG_TYPE_BASE:
+		regno = X86_SIB_BASE(insn->sib.value);
+		/*
+		 * If ModRM.mod is 0 and SIB.base == 5, the base of the
+		 * register-indirect addressing is 0. In this case, a
+		 * 32-bit displacement follows the SIB byte.
+		 */
+		if (!X86_MODRM_MOD(insn->modrm.value) && regno == 5)
+			return -EDOM;
+
+		if (X86_REX_B(insn->rex_prefix.value))
+			regno += 8;
+		break;
+
+	default:
+		pr_err_ratelimited("invalid register type: %d\n", type);
+		return -EINVAL;
+	}
+
+	if (regno >= nr_registers) {
+		WARN_ONCE(1, "decoded an instruction with an invalid register");
+		return -EINVAL;
+	}
+	return regoff[regno];
+}
+
+/**
+ * get_reg_offset_16() - Obtain offset of register indicated by instruction
+ * @insn:	Instruction containing ModRM byte
+ * @regs:	Register values as seen when entering kernel mode
+ * @offs1:	Offset of the first operand register
+ * @offs2:	Offset of the second opeand register, if applicable
+ *
+ * Obtain the offset, in pt_regs, of the registers indicated by the ModRM byte
+ * in @insn. This function is to be used with 16-bit address encodings. The
+ * @offs1 and @offs2 will be written with the offset of the two registers
+ * indicated by the instruction. In cases where any of the registers is not
+ * referenced by the instruction, the value will be set to -EDOM.
+ *
+ * Returns:
+ *
+ * 0 on success, -EINVAL on error.
+ */
+static int get_reg_offset_16(struct insn *insn, struct pt_regs *regs,
+			     int *offs1, int *offs2)
+{
+	/*
+	 * 16-bit addressing can use one or two registers. Specifics of
+	 * encodings are given in Table 2-1. "16-Bit Addressing Forms with the
+	 * ModR/M Byte" of the Intel Software Development Manual.
+	 */
+	static const int regoff1[] = {
+		offsetof(struct pt_regs, bx),
+		offsetof(struct pt_regs, bx),
+		offsetof(struct pt_regs, bp),
+		offsetof(struct pt_regs, bp),
+		offsetof(struct pt_regs, si),
+		offsetof(struct pt_regs, di),
+		offsetof(struct pt_regs, bp),
+		offsetof(struct pt_regs, bx),
+	};
+
+	static const int regoff2[] = {
+		offsetof(struct pt_regs, si),
+		offsetof(struct pt_regs, di),
+		offsetof(struct pt_regs, si),
+		offsetof(struct pt_regs, di),
+		-EDOM,
+		-EDOM,
+		-EDOM,
+		-EDOM,
+	};
+
+	if (!offs1 || !offs2)
+		return -EINVAL;
+
+	/* Operand is a register, use the generic function. */
+	if (X86_MODRM_MOD(insn->modrm.value) == 3) {
+		*offs1 = insn_get_modrm_rm_off(insn, regs);
+		*offs2 = -EDOM;
+		return 0;
+	}
+
+	*offs1 = regoff1[X86_MODRM_RM(insn->modrm.value)];
+	*offs2 = regoff2[X86_MODRM_RM(insn->modrm.value)];
+
+	/*
+	 * If ModRM.mod is 0 and ModRM.rm is 110b, then we use displacement-
+	 * only addressing. This means that no registers are involved in
+	 * computing the effective address. Thus, ensure that the first
+	 * register offset is invalild. The second register offset is already
+	 * invalid under the aforementioned conditions.
+	 */
+	if ((X86_MODRM_MOD(insn->modrm.value) == 0) &&
+	    (X86_MODRM_RM(insn->modrm.value) == 6))
+		*offs1 = -EDOM;
+
+	return 0;
+}
+
+/**
+ * get_desc() - Obtain pointer to a segment descriptor
+ * @sel:	Segment selector
+ *
+ * Given a segment selector, obtain a pointer to the segment descriptor.
+ * Both global and local descriptor tables are supported.
+ *
+ * Returns:
+ *
+ * Pointer to segment descriptor on success.
+ *
+ * NULL on error.
+ */
+static struct desc_struct *get_desc(unsigned short sel)
+{
+	struct desc_ptr gdt_desc = {0, 0};
+	unsigned long desc_base;
+
+#ifdef CONFIG_MODIFY_LDT_SYSCALL
+	if ((sel & SEGMENT_TI_MASK) == SEGMENT_LDT) {
+		struct desc_struct *desc = NULL;
+		struct ldt_struct *ldt;
+
+		/* Bits [15:3] contain the index of the desired entry. */
+		sel >>= 3;
+
+		mutex_lock(&current->active_mm->context.lock);
+		ldt = current->active_mm->context.ldt;
+		if (ldt && sel < ldt->nr_entries)
+			desc = &ldt->entries[sel];
+
+		mutex_unlock(&current->active_mm->context.lock);
+
+		return desc;
+	}
+#endif
+	native_store_gdt(&gdt_desc);
+
+	/*
+	 * Segment descriptors have a size of 8 bytes. Thus, the index is
+	 * multiplied by 8 to obtain the memory offset of the desired descriptor
+	 * from the base of the GDT. As bits [15:3] of the segment selector
+	 * contain the index, it can be regarded as multiplied by 8 already.
+	 * All that remains is to clear bits [2:0].
+	 */
+	desc_base = sel & ~(SEGMENT_RPL_MASK | SEGMENT_TI_MASK);
+
+	if (desc_base > gdt_desc.size)
+		return NULL;
+
+	return (struct desc_struct *)(gdt_desc.address + desc_base);
+}
+
+/**
+ * insn_get_seg_base() - Obtain base address of segment descriptor.
+ * @regs:		Register values as seen when entering kernel mode
+ * @seg_reg_idx:	Index of the segment register pointing to seg descriptor
+ *
+ * Obtain the base address of the segment as indicated by the segment descriptor
+ * pointed by the segment selector. The segment selector is obtained from the
+ * input segment register index @seg_reg_idx.
+ *
+ * Returns:
+ *
+ * In protected mode, base address of the segment. Zero in long mode,
+ * except when FS or GS are used. In virtual-8086 mode, the segment
+ * selector shifted 4 bits to the right.
+ *
+ * -1L in case of error.
+ */
+unsigned long insn_get_seg_base(struct pt_regs *regs, int seg_reg_idx)
+{
+	struct desc_struct *desc;
+	short sel;
+
+	sel = get_segment_selector(regs, seg_reg_idx);
+	if (sel < 0)
+		return -1L;
+
+	if (v8086_mode(regs))
+		/*
+		 * Base is simply the segment selector shifted 4
+		 * bits to the right.
+		 */
+		return (unsigned long)(sel << 4);
+
+	if (user_64bit_mode(regs)) {
+		/*
+		 * Only FS or GS will have a base address, the rest of
+		 * the segments' bases are forced to 0.
+		 */
+		unsigned long base;
+
+		if (seg_reg_idx == INAT_SEG_REG_FS)
+			rdmsrl(MSR_FS_BASE, base);
+		else if (seg_reg_idx == INAT_SEG_REG_GS)
+			/*
+			 * swapgs was called at the kernel entry point. Thus,
+			 * MSR_KERNEL_GS_BASE will have the user-space GS base.
+			 */
+			rdmsrl(MSR_KERNEL_GS_BASE, base);
+		else
+			base = 0;
+		return base;
+	}
+
+	/* In protected mode the segment selector cannot be null. */
+	if (!sel)
+		return -1L;
+
+	desc = get_desc(sel);
+	if (!desc)
+		return -1L;
+
+	return get_desc_base(desc);
+}
+
+/**
+ * get_seg_limit() - Obtain the limit of a segment descriptor
+ * @regs:		Register values as seen when entering kernel mode
+ * @seg_reg_idx:	Index of the segment register pointing to seg descriptor
+ *
+ * Obtain the limit of the segment as indicated by the segment descriptor
+ * pointed by the segment selector. The segment selector is obtained from the
+ * input segment register index @seg_reg_idx.
+ *
+ * Returns:
+ *
+ * In protected mode, the limit of the segment descriptor in bytes.
+ * In long mode and virtual-8086 mode, segment limits are not enforced. Thus,
+ * limit is returned as -1L to imply a limit-less segment.
+ *
+ * Zero is returned on error.
+ */
+static unsigned long get_seg_limit(struct pt_regs *regs, int seg_reg_idx)
+{
+	struct desc_struct *desc;
+	unsigned long limit;
+	short sel;
+
+	sel = get_segment_selector(regs, seg_reg_idx);
+	if (sel < 0)
+		return 0;
+
+	if (user_64bit_mode(regs) || v8086_mode(regs))
+		return -1L;
+
+	if (!sel)
+		return 0;
+
+	desc = get_desc(sel);
+	if (!desc)
+		return 0;
+
+	/*
+	 * If the granularity bit is set, the limit is given in multiples
+	 * of 4096. This also means that the 12 least significant bits are
+	 * not tested when checking the segment limits. In practice,
+	 * this means that the segment ends in (limit << 12) + 0xfff.
+	 */
+	limit = get_desc_limit(desc);
+	if (desc->g)
+		limit = (limit << 12) + 0xfff;
+
+	return limit;
+}
+
+/**
+ * insn_get_code_seg_params() - Obtain code segment parameters
+ * @regs:	Structure with register values as seen when entering kernel mode
+ *
+ * Obtain address and operand sizes of the code segment. It is obtained from the
+ * selector contained in the CS register in regs. In protected mode, the default
+ * address is determined by inspecting the L and D bits of the segment
+ * descriptor. In virtual-8086 mode, the default is always two bytes for both
+ * address and operand sizes.
+ *
+ * Returns:
+ *
+ * A signed 8-bit value containing the default parameters on success.
+ *
+ * -EINVAL on error.
+ */
+char insn_get_code_seg_params(struct pt_regs *regs)
+{
+	struct desc_struct *desc;
+	short sel;
+
+	if (v8086_mode(regs))
+		/* Address and operand size are both 16-bit. */
+		return INSN_CODE_SEG_PARAMS(2, 2);
+
+	sel = get_segment_selector(regs, INAT_SEG_REG_CS);
+	if (sel < 0)
+		return sel;
+
+	desc = get_desc(sel);
+	if (!desc)
+		return -EINVAL;
+
+	/*
+	 * The most significant byte of the Type field of the segment descriptor
+	 * determines whether a segment contains data or code. If this is a data
+	 * segment, return error.
+	 */
+	if (!(desc->type & BIT(3)))
+		return -EINVAL;
+
+	switch ((desc->l << 1) | desc->d) {
+	case 0: /*
+		 * Legacy mode. CS.L=0, CS.D=0. Address and operand size are
+		 * both 16-bit.
+		 */
+		return INSN_CODE_SEG_PARAMS(2, 2);
+	case 1: /*
+		 * Legacy mode. CS.L=0, CS.D=1. Address and operand size are
+		 * both 32-bit.
+		 */
+		return INSN_CODE_SEG_PARAMS(4, 4);
+	case 2: /*
+		 * IA-32e 64-bit mode. CS.L=1, CS.D=0. Address size is 64-bit;
+		 * operand size is 32-bit.
+		 */
+		return INSN_CODE_SEG_PARAMS(4, 8);
+	case 3: /* Invalid setting. CS.L=1, CS.D=1 */
+		/* fall through */
+	default:
+		return -EINVAL;
+	}
+}
+
+/**
+ * insn_get_modrm_rm_off() - Obtain register in r/m part of the ModRM byte
+ * @insn:	Instruction containing the ModRM byte
+ * @regs:	Register values as seen when entering kernel mode
+ *
+ * Returns:
+ *
+ * The register indicated by the r/m part of the ModRM byte. The
+ * register is obtained as an offset from the base of pt_regs. In specific
+ * cases, the returned value can be -EDOM to indicate that the particular value
+ * of ModRM does not refer to a register and shall be ignored.
+ */
+int insn_get_modrm_rm_off(struct insn *insn, struct pt_regs *regs)
+{
+	return get_reg_offset(insn, regs, REG_TYPE_RM);
+}
+
+/**
+ * get_seg_base_limit() - obtain base address and limit of a segment
+ * @insn:	Instruction. Must be valid.
+ * @regs:	Register values as seen when entering kernel mode
+ * @regoff:	Operand offset, in pt_regs, used to resolve segment descriptor
+ * @base:	Obtained segment base
+ * @limit:	Obtained segment limit
+ *
+ * Obtain the base address and limit of the segment associated with the operand
+ * @regoff and, if any or allowed, override prefixes in @insn. This function is
+ * different from insn_get_seg_base() as the latter does not resolve the segment
+ * associated with the instruction operand. If a limit is not needed (e.g.,
+ * when running in long mode), @limit can be NULL.
+ *
+ * Returns:
+ *
+ * 0 on success. @base and @limit will contain the base address and of the
+ * resolved segment, respectively.
+ *
+ * -EINVAL on error.
+ */
+static int get_seg_base_limit(struct insn *insn, struct pt_regs *regs,
+			      int regoff, unsigned long *base,
+			      unsigned long *limit)
+{
+	int seg_reg_idx;
+
+	if (!base)
+		return -EINVAL;
+
+	seg_reg_idx = resolve_seg_reg(insn, regs, regoff);
+	if (seg_reg_idx < 0)
+		return seg_reg_idx;
+
+	*base = insn_get_seg_base(regs, seg_reg_idx);
+	if (*base == -1L)
+		return -EINVAL;
+
+	if (!limit)
+		return 0;
+
+	*limit = get_seg_limit(regs, seg_reg_idx);
+	if (!(*limit))
+		return -EINVAL;
+
+	return 0;
+}
+
+/**
+ * get_eff_addr_reg() - Obtain effective address from register operand
+ * @insn:	Instruction. Must be valid.
+ * @regs:	Register values as seen when entering kernel mode
+ * @regoff:	Obtained operand offset, in pt_regs, with the effective address
+ * @eff_addr:	Obtained effective address
+ *
+ * Obtain the effective address stored in the register operand as indicated by
+ * the ModRM byte. This function is to be used only with register addressing
+ * (i.e.,  ModRM.mod is 3). The effective address is saved in @eff_addr. The
+ * register operand, as an offset from the base of pt_regs, is saved in @regoff;
+ * such offset can then be used to resolve the segment associated with the
+ * operand. This function can be used with any of the supported address sizes
+ * in x86.
+ *
+ * Returns:
+ *
+ * 0 on success. @eff_addr will have the effective address stored in the
+ * operand indicated by ModRM. @regoff will have such operand as an offset from
+ * the base of pt_regs.
+ *
+ * -EINVAL on error.
+ */
+static int get_eff_addr_reg(struct insn *insn, struct pt_regs *regs,
+			    int *regoff, long *eff_addr)
+{
+	insn_get_modrm(insn);
+
+	if (!insn->modrm.nbytes)
+		return -EINVAL;
+
+	if (X86_MODRM_MOD(insn->modrm.value) != 3)
+		return -EINVAL;
+
+	*regoff = get_reg_offset(insn, regs, REG_TYPE_RM);
+	if (*regoff < 0)
+		return -EINVAL;
+
+	/* Ignore bytes that are outside the address size. */
+	if (insn->addr_bytes == 2)
+		*eff_addr = regs_get_register(regs, *regoff) & 0xffff;
+	else if (insn->addr_bytes == 4)
+		*eff_addr = regs_get_register(regs, *regoff) & 0xffffffff;
+	else /* 64-bit address */
+		*eff_addr = regs_get_register(regs, *regoff);
+
+	return 0;
+}
+
+/**
+ * get_eff_addr_modrm() - Obtain referenced effective address via ModRM
+ * @insn:	Instruction. Must be valid.
+ * @regs:	Register values as seen when entering kernel mode
+ * @regoff:	Obtained operand offset, in pt_regs, associated with segment
+ * @eff_addr:	Obtained effective address
+ *
+ * Obtain the effective address referenced by the ModRM byte of @insn. After
+ * identifying the registers involved in the register-indirect memory reference,
+ * its value is obtained from the operands in @regs. The computed address is
+ * stored @eff_addr. Also, the register operand that indicates the associated
+ * segment is stored in @regoff, this parameter can later be used to determine
+ * such segment.
+ *
+ * Returns:
+ *
+ * 0 on success. @eff_addr will have the referenced effective address. @regoff
+ * will have a register, as an offset from the base of pt_regs, that can be used
+ * to resolve the associated segment.
+ *
+ * -EINVAL on error.
+ */
+static int get_eff_addr_modrm(struct insn *insn, struct pt_regs *regs,
+			      int *regoff, long *eff_addr)
+{
+	long tmp;
+
+	if (insn->addr_bytes != 8 && insn->addr_bytes != 4)
+		return -EINVAL;
+
+	insn_get_modrm(insn);
+
+	if (!insn->modrm.nbytes)
+		return -EINVAL;
+
+	if (X86_MODRM_MOD(insn->modrm.value) > 2)
+		return -EINVAL;
+
+	*regoff = get_reg_offset(insn, regs, REG_TYPE_RM);
+
+	/*
+	 * -EDOM means that we must ignore the address_offset. In such a case,
+	 * in 64-bit mode the effective address relative to the rIP of the
+	 * following instruction.
+	 */
+	if (*regoff == -EDOM) {
+		if (user_64bit_mode(regs))
+			tmp = regs->ip + insn->length;
+		else
+			tmp = 0;
+	} else if (*regoff < 0) {
+		return -EINVAL;
+	} else {
+		tmp = regs_get_register(regs, *regoff);
+	}
+
+	if (insn->addr_bytes == 4) {
+		int addr32 = (int)(tmp & 0xffffffff) + insn->displacement.value;
+
+		*eff_addr = addr32 & 0xffffffff;
+	} else {
+		*eff_addr = tmp + insn->displacement.value;
+	}
+
+	return 0;
+}
+
+/**
+ * get_eff_addr_modrm_16() - Obtain referenced effective address via ModRM
+ * @insn:	Instruction. Must be valid.
+ * @regs:	Register values as seen when entering kernel mode
+ * @regoff:	Obtained operand offset, in pt_regs, associated with segment
+ * @eff_addr:	Obtained effective address
+ *
+ * Obtain the 16-bit effective address referenced by the ModRM byte of @insn.
+ * After identifying the registers involved in the register-indirect memory
+ * reference, its value is obtained from the operands in @regs. The computed
+ * address is stored @eff_addr. Also, the register operand that indicates
+ * the associated segment is stored in @regoff, this parameter can later be used
+ * to determine such segment.
+ *
+ * Returns:
+ *
+ * 0 on success. @eff_addr will have the referenced effective address. @regoff
+ * will have a register, as an offset from the base of pt_regs, that can be used
+ * to resolve the associated segment.
+ *
+ * -EINVAL on error.
+ */
+static int get_eff_addr_modrm_16(struct insn *insn, struct pt_regs *regs,
+				 int *regoff, short *eff_addr)
+{
+	int addr_offset1, addr_offset2, ret;
+	short addr1 = 0, addr2 = 0, displacement;
+
+	if (insn->addr_bytes != 2)
+		return -EINVAL;
+
+	insn_get_modrm(insn);
+
+	if (!insn->modrm.nbytes)
+		return -EINVAL;
+
+	if (X86_MODRM_MOD(insn->modrm.value) > 2)
+		return -EINVAL;
+
+	ret = get_reg_offset_16(insn, regs, &addr_offset1, &addr_offset2);
+	if (ret < 0)
+		return -EINVAL;
+
+	/*
+	 * Don't fail on invalid offset values. They might be invalid because
+	 * they cannot be used for this particular value of ModRM. Instead, use
+	 * them in the computation only if they contain a valid value.
+	 */
+	if (addr_offset1 != -EDOM)
+		addr1 = regs_get_register(regs, addr_offset1) & 0xffff;
+
+	if (addr_offset2 != -EDOM)
+		addr2 = regs_get_register(regs, addr_offset2) & 0xffff;
+
+	displacement = insn->displacement.value & 0xffff;
+	*eff_addr = addr1 + addr2 + displacement;
+
+	/*
+	 * The first operand register could indicate to use of either SS or DS
+	 * registers to obtain the segment selector.  The second operand
+	 * register can only indicate the use of DS. Thus, the first operand
+	 * will be used to obtain the segment selector.
+	 */
+	*regoff = addr_offset1;
+
+	return 0;
+}
+
+/**
+ * get_eff_addr_sib() - Obtain referenced effective address via SIB
+ * @insn:	Instruction. Must be valid.
+ * @regs:	Register values as seen when entering kernel mode
+ * @regoff:	Obtained operand offset, in pt_regs, associated with segment
+ * @eff_addr:	Obtained effective address
+ *
+ * Obtain the effective address referenced by the SIB byte of @insn. After
+ * identifying the registers involved in the indexed, register-indirect memory
+ * reference, its value is obtained from the operands in @regs. The computed
+ * address is stored @eff_addr. Also, the register operand that indicates the
+ * associated segment is stored in @regoff, this parameter can later be used to
+ * determine such segment.
+ *
+ * Returns:
+ *
+ * 0 on success. @eff_addr will have the referenced effective address.
+ * @base_offset will have a register, as an offset from the base of pt_regs,
+ * that can be used to resolve the associated segment.
+ *
+ * -EINVAL on error.
+ */
+static int get_eff_addr_sib(struct insn *insn, struct pt_regs *regs,
+			    int *base_offset, long *eff_addr)
+{
+	long base, indx;
+	int indx_offset;
+
+	if (insn->addr_bytes != 8 && insn->addr_bytes != 4)
+		return -EINVAL;
+
+	insn_get_modrm(insn);
+
+	if (!insn->modrm.nbytes)
+		return -EINVAL;
+
+	if (X86_MODRM_MOD(insn->modrm.value) > 2)
+		return -EINVAL;
+
+	insn_get_sib(insn);
+
+	if (!insn->sib.nbytes)
+		return -EINVAL;
+
+	*base_offset = get_reg_offset(insn, regs, REG_TYPE_BASE);
+	indx_offset = get_reg_offset(insn, regs, REG_TYPE_INDEX);
+
+	/*
+	 * Negative values in the base and index offset means an error when
+	 * decoding the SIB byte. Except -EDOM, which means that the registers
+	 * should not be used in the address computation.
+	 */
+	if (*base_offset == -EDOM)
+		base = 0;
+	else if (*base_offset < 0)
+		return -EINVAL;
+	else
+		base = regs_get_register(regs, *base_offset);
+
+	if (indx_offset == -EDOM)
+		indx = 0;
+	else if (indx_offset < 0)
+		return -EINVAL;
+	else
+		indx = regs_get_register(regs, indx_offset);
+
+	if (insn->addr_bytes == 4) {
+		int addr32, base32, idx32;
+
+		base32 = base & 0xffffffff;
+		idx32 = indx & 0xffffffff;
+
+		addr32 = base32 + idx32 * (1 << X86_SIB_SCALE(insn->sib.value));
+		addr32 += insn->displacement.value;
+
+		*eff_addr = addr32 & 0xffffffff;
+	} else {
+		*eff_addr = base + indx * (1 << X86_SIB_SCALE(insn->sib.value));
+		*eff_addr += insn->displacement.value;
+	}
+
+	return 0;
+}
+
+/**
+ * get_addr_ref_16() - Obtain the 16-bit address referred by instruction
+ * @insn:	Instruction containing ModRM byte and displacement
+ * @regs:	Register values as seen when entering kernel mode
+ *
+ * This function is to be used with 16-bit address encodings. Obtain the memory
+ * address referred by the instruction's ModRM and displacement bytes. Also, the
+ * segment used as base is determined by either any segment override prefixes in
+ * @insn or the default segment of the registers involved in the address
+ * computation. In protected mode, segment limits are enforced.
+ *
+ * Returns:
+ *
+ * Linear address referenced by the instruction operands on success.
+ *
+ * -1L on error.
+ */
+static void __user *get_addr_ref_16(struct insn *insn, struct pt_regs *regs)
+{
+	unsigned long linear_addr = -1L, seg_base, seg_limit;
+	int ret, regoff;
+	short eff_addr;
+	long tmp;
+
+	insn_get_modrm(insn);
+	insn_get_displacement(insn);
+
+	if (insn->addr_bytes != 2)
+		goto out;
+
+	if (X86_MODRM_MOD(insn->modrm.value) == 3) {
+		ret = get_eff_addr_reg(insn, regs, &regoff, &tmp);
+		if (ret)
+			goto out;
+
+		eff_addr = tmp;
+	} else {
+		ret = get_eff_addr_modrm_16(insn, regs, &regoff, &eff_addr);
+		if (ret)
+			goto out;
+	}
+
+	ret = get_seg_base_limit(insn, regs, regoff, &seg_base, &seg_limit);
+	if (ret)
+		goto out;
+
+	/*
+	 * Before computing the linear address, make sure the effective address
+	 * is within the limits of the segment. In virtual-8086 mode, segment
+	 * limits are not enforced. In such a case, the segment limit is -1L to
+	 * reflect this fact.
+	 */
+	if ((unsigned long)(eff_addr & 0xffff) > seg_limit)
+		goto out;
+
+	linear_addr = (unsigned long)(eff_addr & 0xffff) + seg_base;
+
+	/* Limit linear address to 20 bits */
+	if (v8086_mode(regs))
+		linear_addr &= 0xfffff;
+
+out:
+	return (void __user *)linear_addr;
+}
+
+/**
+ * get_addr_ref_32() - Obtain a 32-bit linear address
+ * @insn:	Instruction with ModRM, SIB bytes and displacement
+ * @regs:	Register values as seen when entering kernel mode
+ *
+ * This function is to be used with 32-bit address encodings to obtain the
+ * linear memory address referred by the instruction's ModRM, SIB,
+ * displacement bytes and segment base address, as applicable. If in protected
+ * mode, segment limits are enforced.
+ *
+ * Returns:
+ *
+ * Linear address referenced by instruction and registers on success.
+ *
+ * -1L on error.
+ */
+static void __user *get_addr_ref_32(struct insn *insn, struct pt_regs *regs)
+{
+	unsigned long linear_addr = -1L, seg_base, seg_limit;
+	int eff_addr, regoff;
+	long tmp;
+	int ret;
+
+	if (insn->addr_bytes != 4)
+		goto out;
+
+	if (X86_MODRM_MOD(insn->modrm.value) == 3) {
+		ret = get_eff_addr_reg(insn, regs, &regoff, &tmp);
+		if (ret)
+			goto out;
+
+		eff_addr = tmp;
+
+	} else {
+		if (insn->sib.nbytes) {
+			ret = get_eff_addr_sib(insn, regs, &regoff, &tmp);
+			if (ret)
+				goto out;
+
+			eff_addr = tmp;
+		} else {
+			ret = get_eff_addr_modrm(insn, regs, &regoff, &tmp);
+			if (ret)
+				goto out;
+
+			eff_addr = tmp;
+		}
+	}
+
+	ret = get_seg_base_limit(insn, regs, regoff, &seg_base, &seg_limit);
+	if (ret)
+		goto out;
+
+	/*
+	 * In protected mode, before computing the linear address, make sure
+	 * the effective address is within the limits of the segment.
+	 * 32-bit addresses can be used in long and virtual-8086 modes if an
+	 * address override prefix is used. In such cases, segment limits are
+	 * not enforced. When in virtual-8086 mode, the segment limit is -1L
+	 * to reflect this situation.
+	 *
+	 * After computed, the effective address is treated as an unsigned
+	 * quantity.
+	 */
+	if (!user_64bit_mode(regs) && ((unsigned int)eff_addr > seg_limit))
+		goto out;
+
+	/*
+	 * Even though 32-bit address encodings are allowed in virtual-8086
+	 * mode, the address range is still limited to [0x-0xffff].
+	 */
+	if (v8086_mode(regs) && (eff_addr & ~0xffff))
+		goto out;
+
+	/*
+	 * Data type long could be 64 bits in size. Ensure that our 32-bit
+	 * effective address is not sign-extended when computing the linear
+	 * address.
+	 */
+	linear_addr = (unsigned long)(eff_addr & 0xffffffff) + seg_base;
+
+	/* Limit linear address to 20 bits */
+	if (v8086_mode(regs))
+		linear_addr &= 0xfffff;
+
+out:
+	return (void __user *)linear_addr;
+}
+
+/**
+ * get_addr_ref_64() - Obtain a 64-bit linear address
+ * @insn:	Instruction struct with ModRM and SIB bytes and displacement
+ * @regs:	Structure with register values as seen when entering kernel mode
+ *
+ * This function is to be used with 64-bit address encodings to obtain the
+ * linear memory address referred by the instruction's ModRM, SIB,
+ * displacement bytes and segment base address, as applicable.
+ *
+ * Returns:
+ *
+ * Linear address referenced by instruction and registers on success.
+ *
+ * -1L on error.
+ */
+#ifndef CONFIG_X86_64
+static void __user *get_addr_ref_64(struct insn *insn, struct pt_regs *regs)
+{
+	return (void __user *)-1L;
+}
+#else
+static void __user *get_addr_ref_64(struct insn *insn, struct pt_regs *regs)
+{
+	unsigned long linear_addr = -1L, seg_base;
+	int regoff, ret;
+	long eff_addr;
+
+	if (insn->addr_bytes != 8)
+		goto out;
+
+	if (X86_MODRM_MOD(insn->modrm.value) == 3) {
+		ret = get_eff_addr_reg(insn, regs, &regoff, &eff_addr);
+		if (ret)
+			goto out;
+
+	} else {
+		if (insn->sib.nbytes) {
+			ret = get_eff_addr_sib(insn, regs, &regoff, &eff_addr);
+			if (ret)
+				goto out;
+		} else {
+			ret = get_eff_addr_modrm(insn, regs, &regoff, &eff_addr);
+			if (ret)
+				goto out;
+		}
+
+	}
+
+	ret = get_seg_base_limit(insn, regs, regoff, &seg_base, NULL);
+	if (ret)
+		goto out;
+
+	linear_addr = (unsigned long)eff_addr + seg_base;
+
+out:
+	return (void __user *)linear_addr;
+}
+#endif /* CONFIG_X86_64 */
+
+/**
+ * insn_get_addr_ref() - Obtain the linear address referred by instruction
+ * @insn:	Instruction structure containing ModRM byte and displacement
+ * @regs:	Structure with register values as seen when entering kernel mode
+ *
+ * Obtain the linear address referred by the instruction's ModRM, SIB and
+ * displacement bytes, and segment base, as applicable. In protected mode,
+ * segment limits are enforced.
+ *
+ * Returns:
+ *
+ * Linear address referenced by instruction and registers on success.
+ *
+ * -1L on error.
+ */
+void __user *insn_get_addr_ref(struct insn *insn, struct pt_regs *regs)
+{
+	if (!insn || !regs)
+		return (void __user *)-1L;
+
+	switch (insn->addr_bytes) {
+	case 2:
+		return get_addr_ref_16(insn, regs);
+	case 4:
+		return get_addr_ref_32(insn, regs);
+	case 8:
+		return get_addr_ref_64(insn, regs);
+	default:
+		return (void __user *)-1L;
+	}
+}