Merge branch 'x86/core' into tracing/textedit

Conflicts:
	arch/x86/Kconfig
	block/blktrace.c
	kernel/irq/handle.c

Semantic conflict:
	kernel/trace/blktrace.c

Signed-off-by: Ingo Molnar <mingo@elte.hu>

1 files changed, 557 insertions, 0 deletions

diff --git a/arch/x86/kernel/apic/numaq_32.c b/arch/x86/kernel/apic/numaq_32.c
new file mode 100644
index 000000000000..ba2fc6465534
--- /dev/null
+++ b/arch/x86/kernel/apic/numaq_32.c
@@ -0,0 +1,557 @@
+/*
+ * Written by: Patricia Gaughen, IBM Corporation
+ *
+ * Copyright (C) 2002, IBM Corp.
+ * Copyright (C) 2009, Red Hat, Inc., Ingo Molnar
+ *
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT.  See the GNU General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Send feedback to <gone@us.ibm.com>
+ */
+#include <linux/nodemask.h>
+#include <linux/topology.h>
+#include <linux/bootmem.h>
+#include <linux/threads.h>
+#include <linux/cpumask.h>
+#include <linux/kernel.h>
+#include <linux/mmzone.h>
+#include <linux/module.h>
+#include <linux/string.h>
+#include <linux/init.h>
+#include <linux/numa.h>
+#include <linux/smp.h>
+#include <linux/io.h>
+#include <linux/mm.h>
+
+#include <asm/processor.h>
+#include <asm/fixmap.h>
+#include <asm/mpspec.h>
+#include <asm/numaq.h>
+#include <asm/setup.h>
+#include <asm/apic.h>
+#include <asm/e820.h>
+#include <asm/ipi.h>
+
+#define	MB_TO_PAGES(addr)		((addr) << (20 - PAGE_SHIFT))
+
+int found_numaq;
+
+/*
+ * Have to match translation table entries to main table entries by counter
+ * hence the mpc_record variable .... can't see a less disgusting way of
+ * doing this ....
+ */
+struct mpc_trans {
+	unsigned char			mpc_type;
+	unsigned char			trans_len;
+	unsigned char			trans_type;
+	unsigned char			trans_quad;
+	unsigned char			trans_global;
+	unsigned char			trans_local;
+	unsigned short			trans_reserved;
+};
+
+/* x86_quirks member */
+static int				mpc_record;
+
+static struct mpc_trans			*translation_table[MAX_MPC_ENTRY];
+
+int					mp_bus_id_to_node[MAX_MP_BUSSES];
+int					mp_bus_id_to_local[MAX_MP_BUSSES];
+int					quad_local_to_mp_bus_id[NR_CPUS/4][4];
+
+
+static inline void numaq_register_node(int node, struct sys_cfg_data *scd)
+{
+	struct eachquadmem *eq = scd->eq + node;
+
+	node_set_online(node);
+
+	/* Convert to pages */
+	node_start_pfn[node] =
+		 MB_TO_PAGES(eq->hi_shrd_mem_start - eq->priv_mem_size);
+
+	node_end_pfn[node] =
+		 MB_TO_PAGES(eq->hi_shrd_mem_start + eq->hi_shrd_mem_size);
+
+	e820_register_active_regions(node, node_start_pfn[node],
+						node_end_pfn[node]);
+
+	memory_present(node, node_start_pfn[node], node_end_pfn[node]);
+
+	node_remap_size[node] = node_memmap_size_bytes(node,
+					node_start_pfn[node],
+					node_end_pfn[node]);
+}
+
+/*
+ * Function: smp_dump_qct()
+ *
+ * Description: gets memory layout from the quad config table.  This
+ * function also updates node_online_map with the nodes (quads) present.
+ */
+static void __init smp_dump_qct(void)
+{
+	struct sys_cfg_data *scd;
+	int node;
+
+	scd = (void *)__va(SYS_CFG_DATA_PRIV_ADDR);
+
+	nodes_clear(node_online_map);
+	for_each_node(node) {
+		if (scd->quads_present31_0 & (1 << node))
+			numaq_register_node(node, scd);
+	}
+}
+
+void __cpuinit numaq_tsc_disable(void)
+{
+	if (!found_numaq)
+		return;
+
+	if (num_online_nodes() > 1) {
+		printk(KERN_DEBUG "NUMAQ: disabling TSC\n");
+		setup_clear_cpu_cap(X86_FEATURE_TSC);
+	}
+}
+
+static int __init numaq_pre_time_init(void)
+{
+	numaq_tsc_disable();
+	return 0;
+}
+
+static inline int generate_logical_apicid(int quad, int phys_apicid)
+{
+	return (quad << 4) + (phys_apicid ? phys_apicid << 1 : 1);
+}
+
+/* x86_quirks member */
+static int mpc_apic_id(struct mpc_cpu *m)
+{
+	int quad = translation_table[mpc_record]->trans_quad;
+	int logical_apicid = generate_logical_apicid(quad, m->apicid);
+
+	printk(KERN_DEBUG
+		"Processor #%d %u:%u APIC version %d (quad %d, apic %d)\n",
+		 m->apicid, (m->cpufeature & CPU_FAMILY_MASK) >> 8,
+		(m->cpufeature & CPU_MODEL_MASK) >> 4,
+		 m->apicver, quad, logical_apicid);
+
+	return logical_apicid;
+}
+
+/* x86_quirks member */
+static void mpc_oem_bus_info(struct mpc_bus *m, char *name)
+{
+	int quad = translation_table[mpc_record]->trans_quad;
+	int local = translation_table[mpc_record]->trans_local;
+
+	mp_bus_id_to_node[m->busid] = quad;
+	mp_bus_id_to_local[m->busid] = local;
+
+	printk(KERN_INFO "Bus #%d is %s (node %d)\n", m->busid, name, quad);
+}
+
+/* x86_quirks member */
+static void mpc_oem_pci_bus(struct mpc_bus *m)
+{
+	int quad = translation_table[mpc_record]->trans_quad;
+	int local = translation_table[mpc_record]->trans_local;
+
+	quad_local_to_mp_bus_id[quad][local] = m->busid;
+}
+
+static void __init MP_translation_info(struct mpc_trans *m)
+{
+	printk(KERN_INFO
+	    "Translation: record %d, type %d, quad %d, global %d, local %d\n",
+	       mpc_record, m->trans_type, m->trans_quad, m->trans_global,
+	       m->trans_local);
+
+	if (mpc_record >= MAX_MPC_ENTRY)
+		printk(KERN_ERR "MAX_MPC_ENTRY exceeded!\n");
+	else
+		translation_table[mpc_record] = m; /* stash this for later */
+
+	if (m->trans_quad < MAX_NUMNODES && !node_online(m->trans_quad))
+		node_set_online(m->trans_quad);
+}
+
+static int __init mpf_checksum(unsigned char *mp, int len)
+{
+	int sum = 0;
+
+	while (len--)
+		sum += *mp++;
+
+	return sum & 0xFF;
+}
+
+/*
+ * Read/parse the MPC oem tables
+ */
+static void __init
+ smp_read_mpc_oem(struct mpc_oemtable *oemtable, unsigned short oemsize)
+{
+	int count = sizeof(*oemtable);	/* the header size */
+	unsigned char *oemptr = ((unsigned char *)oemtable) + count;
+
+	mpc_record = 0;
+	printk(KERN_INFO
+		"Found an OEM MPC table at %8p - parsing it ... \n", oemtable);
+
+	if (memcmp(oemtable->signature, MPC_OEM_SIGNATURE, 4)) {
+		printk(KERN_WARNING
+		       "SMP mpc oemtable: bad signature [%c%c%c%c]!\n",
+		       oemtable->signature[0], oemtable->signature[1],
+		       oemtable->signature[2], oemtable->signature[3]);
+		return;
+	}
+
+	if (mpf_checksum((unsigned char *)oemtable, oemtable->length)) {
+		printk(KERN_WARNING "SMP oem mptable: checksum error!\n");
+		return;
+	}
+
+	while (count < oemtable->length) {
+		switch (*oemptr) {
+		case MP_TRANSLATION:
+			{
+				struct mpc_trans *m = (void *)oemptr;
+
+				MP_translation_info(m);
+				oemptr += sizeof(*m);
+				count += sizeof(*m);
+				++mpc_record;
+				break;
+			}
+		default:
+			printk(KERN_WARNING
+			       "Unrecognised OEM table entry type! - %d\n",
+			       (int)*oemptr);
+			return;
+		}
+	}
+}
+
+static int __init numaq_setup_ioapic_ids(void)
+{
+	/* so can skip it */
+	return 1;
+}
+
+static struct x86_quirks numaq_x86_quirks __initdata = {
+	.arch_pre_time_init		= numaq_pre_time_init,
+	.arch_time_init			= NULL,
+	.arch_pre_intr_init		= NULL,
+	.arch_memory_setup		= NULL,
+	.arch_intr_init			= NULL,
+	.arch_trap_init			= NULL,
+	.mach_get_smp_config		= NULL,
+	.mach_find_smp_config		= NULL,
+	.mpc_record			= &mpc_record,
+	.mpc_apic_id			= mpc_apic_id,
+	.mpc_oem_bus_info		= mpc_oem_bus_info,
+	.mpc_oem_pci_bus		= mpc_oem_pci_bus,
+	.smp_read_mpc_oem		= smp_read_mpc_oem,
+	.setup_ioapic_ids		= numaq_setup_ioapic_ids,
+};
+
+static __init void early_check_numaq(void)
+{
+	/*
+	 * Find possible boot-time SMP configuration:
+	 */
+	early_find_smp_config();
+
+	/*
+	 * get boot-time SMP configuration:
+	 */
+	if (smp_found_config)
+		early_get_smp_config();
+
+	if (found_numaq)
+		x86_quirks = &numaq_x86_quirks;
+}
+
+int __init get_memcfg_numaq(void)
+{
+	early_check_numaq();
+	if (!found_numaq)
+		return 0;
+	smp_dump_qct();
+
+	return 1;
+}
+
+#define NUMAQ_APIC_DFR_VALUE	(APIC_DFR_CLUSTER)
+
+static inline unsigned int numaq_get_apic_id(unsigned long x)
+{
+	return (x >> 24) & 0x0F;
+}
+
+static inline void numaq_send_IPI_mask(const struct cpumask *mask, int vector)
+{
+	default_send_IPI_mask_sequence_logical(mask, vector);
+}
+
+static inline void numaq_send_IPI_allbutself(int vector)
+{
+	default_send_IPI_mask_allbutself_logical(cpu_online_mask, vector);
+}
+
+static inline void numaq_send_IPI_all(int vector)
+{
+	numaq_send_IPI_mask(cpu_online_mask, vector);
+}
+
+#define NUMAQ_TRAMPOLINE_PHYS_LOW	(0x8)
+#define NUMAQ_TRAMPOLINE_PHYS_HIGH	(0xa)
+
+/*
+ * Because we use NMIs rather than the INIT-STARTUP sequence to
+ * bootstrap the CPUs, the APIC may be in a weird state. Kick it:
+ */
+static inline void numaq_smp_callin_clear_local_apic(void)
+{
+	clear_local_APIC();
+}
+
+static inline const cpumask_t *numaq_target_cpus(void)
+{
+	return &CPU_MASK_ALL;
+}
+
+static inline unsigned long
+numaq_check_apicid_used(physid_mask_t bitmap, int apicid)
+{
+	return physid_isset(apicid, bitmap);
+}
+
+static inline unsigned long numaq_check_apicid_present(int bit)
+{
+	return physid_isset(bit, phys_cpu_present_map);
+}
+
+static inline int numaq_apic_id_registered(void)
+{
+	return 1;
+}
+
+static inline void numaq_init_apic_ldr(void)
+{
+	/* Already done in NUMA-Q firmware */
+}
+
+static inline void numaq_setup_apic_routing(void)
+{
+	printk(KERN_INFO
+		"Enabling APIC mode:  NUMA-Q.  Using %d I/O APICs\n",
+		nr_ioapics);
+}
+
+/*
+ * Skip adding the timer int on secondary nodes, which causes
+ * a small but painful rift in the time-space continuum.
+ */
+static inline int numaq_multi_timer_check(int apic, int irq)
+{
+	return apic != 0 && irq == 0;
+}
+
+static inline physid_mask_t numaq_ioapic_phys_id_map(physid_mask_t phys_map)
+{
+	/* We don't have a good way to do this yet - hack */
+	return physids_promote(0xFUL);
+}
+
+static inline int numaq_cpu_to_logical_apicid(int cpu)
+{
+	if (cpu >= nr_cpu_ids)
+		return BAD_APICID;
+	return cpu_2_logical_apicid[cpu];
+}
+
+/*
+ * Supporting over 60 cpus on NUMA-Q requires a locality-dependent
+ * cpu to APIC ID relation to properly interact with the intelligent
+ * mode of the cluster controller.
+ */
+static inline int numaq_cpu_present_to_apicid(int mps_cpu)
+{
+	if (mps_cpu < 60)
+		return ((mps_cpu >> 2) << 4) | (1 << (mps_cpu & 0x3));
+	else
+		return BAD_APICID;
+}
+
+static inline int numaq_apicid_to_node(int logical_apicid)
+{
+	return logical_apicid >> 4;
+}
+
+static inline physid_mask_t numaq_apicid_to_cpu_present(int logical_apicid)
+{
+	int node = numaq_apicid_to_node(logical_apicid);
+	int cpu = __ffs(logical_apicid & 0xf);
+
+	return physid_mask_of_physid(cpu + 4*node);
+}
+
+/* Where the IO area was mapped on multiquad, always 0 otherwise */
+void *xquad_portio;
+
+static inline int numaq_check_phys_apicid_present(int boot_cpu_physical_apicid)
+{
+	return 1;
+}
+
+/*
+ * We use physical apicids here, not logical, so just return the default
+ * physical broadcast to stop people from breaking us
+ */
+static inline unsigned int numaq_cpu_mask_to_apicid(const cpumask_t *cpumask)
+{
+	return 0x0F;
+}
+
+static inline unsigned int
+numaq_cpu_mask_to_apicid_and(const struct cpumask *cpumask,
+			     const struct cpumask *andmask)
+{
+	return 0x0F;
+}
+
+/* No NUMA-Q box has a HT CPU, but it can't hurt to use the default code. */
+static inline int numaq_phys_pkg_id(int cpuid_apic, int index_msb)
+{
+	return cpuid_apic >> index_msb;
+}
+
+static int
+numaq_mps_oem_check(struct mpc_table *mpc, char *oem, char *productid)
+{
+	if (strncmp(oem, "IBM NUMA", 8))
+		printk(KERN_ERR "Warning! Not a NUMA-Q system!\n");
+	else
+		found_numaq = 1;
+
+	return found_numaq;
+}
+
+static int probe_numaq(void)
+{
+	/* already know from get_memcfg_numaq() */
+	return found_numaq;
+}
+
+static void numaq_vector_allocation_domain(int cpu, cpumask_t *retmask)
+{
+	/* Careful. Some cpus do not strictly honor the set of cpus
+	 * specified in the interrupt destination when using lowest
+	 * priority interrupt delivery mode.
+	 *
+	 * In particular there was a hyperthreading cpu observed to
+	 * deliver interrupts to the wrong hyperthread when only one
+	 * hyperthread was specified in the interrupt desitination.
+	 */
+	*retmask = (cpumask_t){ { [0] = APIC_ALL_CPUS, } };
+}
+
+static void numaq_setup_portio_remap(void)
+{
+	int num_quads = num_online_nodes();
+
+	if (num_quads <= 1)
+		return;
+
+	printk(KERN_INFO
+		"Remapping cross-quad port I/O for %d quads\n", num_quads);
+
+	xquad_portio = ioremap(XQUAD_PORTIO_BASE, num_quads*XQUAD_PORTIO_QUAD);
+
+	printk(KERN_INFO
+		"xquad_portio vaddr 0x%08lx, len %08lx\n",
+		(u_long) xquad_portio, (u_long) num_quads*XQUAD_PORTIO_QUAD);
+}
+
+struct apic apic_numaq = {
+
+	.name				= "NUMAQ",
+	.probe				= probe_numaq,
+	.acpi_madt_oem_check		= NULL,
+	.apic_id_registered		= numaq_apic_id_registered,
+
+	.irq_delivery_mode		= dest_LowestPrio,
+	/* physical delivery on LOCAL quad: */
+	.irq_dest_mode			= 0,
+
+	.target_cpus			= numaq_target_cpus,
+	.disable_esr			= 1,
+	.dest_logical			= APIC_DEST_LOGICAL,
+	.check_apicid_used		= numaq_check_apicid_used,
+	.check_apicid_present		= numaq_check_apicid_present,
+
+	.vector_allocation_domain	= numaq_vector_allocation_domain,
+	.init_apic_ldr			= numaq_init_apic_ldr,
+
+	.ioapic_phys_id_map		= numaq_ioapic_phys_id_map,
+	.setup_apic_routing		= numaq_setup_apic_routing,
+	.multi_timer_check		= numaq_multi_timer_check,
+	.apicid_to_node			= numaq_apicid_to_node,
+	.cpu_to_logical_apicid		= numaq_cpu_to_logical_apicid,
+	.cpu_present_to_apicid		= numaq_cpu_present_to_apicid,
+	.apicid_to_cpu_present		= numaq_apicid_to_cpu_present,
+	.setup_portio_remap		= numaq_setup_portio_remap,
+	.check_phys_apicid_present	= numaq_check_phys_apicid_present,
+	.enable_apic_mode		= NULL,
+	.phys_pkg_id			= numaq_phys_pkg_id,
+	.mps_oem_check			= numaq_mps_oem_check,
+
+	.get_apic_id			= numaq_get_apic_id,
+	.set_apic_id			= NULL,
+	.apic_id_mask			= 0x0F << 24,
+
+	.cpu_mask_to_apicid		= numaq_cpu_mask_to_apicid,
+	.cpu_mask_to_apicid_and		= numaq_cpu_mask_to_apicid_and,
+
+	.send_IPI_mask			= numaq_send_IPI_mask,
+	.send_IPI_mask_allbutself	= NULL,
+	.send_IPI_allbutself		= numaq_send_IPI_allbutself,
+	.send_IPI_all			= numaq_send_IPI_all,
+	.send_IPI_self			= default_send_IPI_self,
+
+	.wakeup_secondary_cpu		= wakeup_secondary_cpu_via_nmi,
+	.trampoline_phys_low		= NUMAQ_TRAMPOLINE_PHYS_LOW,
+	.trampoline_phys_high		= NUMAQ_TRAMPOLINE_PHYS_HIGH,
+
+	/* We don't do anything here because we use NMI's to boot instead */
+	.wait_for_init_deassert		= NULL,
+
+	.smp_callin_clear_local_apic	= numaq_smp_callin_clear_local_apic,
+	.inquire_remote_apic		= NULL,
+
+	.read				= native_apic_mem_read,
+	.write				= native_apic_mem_write,
+	.icr_read			= native_apic_icr_read,
+	.icr_write			= native_apic_icr_write,
+	.wait_icr_idle			= native_apic_wait_icr_idle,
+	.safe_wait_icr_idle		= native_safe_apic_wait_icr_idle,
+};