Merge tag 'tty-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull tty and serial driver updates from Greg KH:
 "Here is the big set of tty and serial driver updates for 5.19-rc1.

  Lots of tiny cleanups in here, the major stuff is:

   - termbit cleanups and unification by Ilpo. A much needed change that
     goes a long way to making things simpler for all of the different
     arches

   - tty documentation cleanups and movements to their own place in the
     documentation tree

   - old tty driver cleanups and fixes from Jiri to bring some existing
     drivers into the modern world

   - RS485 cleanups and unifications to make it easier for individual
     drivers to support this mode instead of having to duplicate logic
     in each driver

   - Lots of 8250 driver updates and additions

   - new device id additions

   - n_gsm continued fixes and cleanups

   - other minor serial driver updates and cleanups

  All of these have been in linux-next for weeks with no reported issues"

* tag 'tty-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (166 commits)
  tty: Rework receive flow control char logic
  pcmcia: synclink_cs: Don't allow CS5-6
  serial: stm32-usart: Correct CSIZE, bits, and parity
  serial: st-asc: Sanitize CSIZE and correct PARENB for CS7
  serial: sifive: Sanitize CSIZE and c_iflag
  serial: sh-sci: Don't allow CS5-6
  serial: txx9: Don't allow CS5-6
  serial: rda-uart: Don't allow CS5-6
  serial: digicolor-usart: Don't allow CS5-6
  serial: uartlite: Fix BRKINT clearing
  serial: cpm_uart: Fix build error without CONFIG_SERIAL_CPM_CONSOLE
  serial: core: Do stop_rx in suspend path for console if console_suspend is disabled
  tty: serial: qcom-geni-serial: Remove uart frequency table. Instead, find suitable frequency with call to clk_round_rate.
  dt-bindings: serial: renesas,em-uart: Add RZ/V2M clock to access the registers
  serial: 8250_fintek: Check SER_RS485_RTS_* only with RS485
  Revert "serial: 8250_mtk: Make sure to select the right FEATURE_SEL"
  serial: msm_serial: disable interrupts in __msm_console_write()
  serial: meson: acquire port->lock in startup()
  serial: 8250_dw: Use dev_err_probe()
  serial: 8250_dw: Use devm_add_action_or_reset()
  ...

1 files changed, 84 insertions, 139 deletions

diff --git a/arch/sparc/include/uapi/asm/termbits.h b/arch/sparc/include/uapi/asm/termbits.h
index ce5ad5d0f105..4321322701fc 100644
--- a/arch/sparc/include/uapi/asm/termbits.h
+++ b/arch/sparc/include/uapi/asm/termbits.h
@@ -2,15 +2,12 @@
 #ifndef _UAPI_SPARC_TERMBITS_H
 #define _UAPI_SPARC_TERMBITS_H
 
-#include <linux/posix_types.h>
-
-typedef unsigned char   cc_t;
-typedef unsigned int    speed_t;
+#include <asm-generic/termbits-common.h>
 
 #if defined(__sparc__) && defined(__arch64__)
-typedef unsigned int    tcflag_t;
+typedef unsigned int	tcflag_t;
 #else
-typedef unsigned long   tcflag_t;
+typedef unsigned long	tcflag_t;
 #endif
 
 #define NCC 8
@@ -61,21 +58,19 @@ struct ktermios {
 };
 
 /* c_cc characters */
-#define VINTR    0
-#define VQUIT    1
-#define VERASE   2
-#define VKILL    3
-#define VEOF     4
-#define VEOL     5
-#define VEOL2    6
-#define VSWTC    7
-#define VSTART   8
-#define VSTOP    9
-
-
+#define VINTR     0
+#define VQUIT     1
+#define VERASE    2
+#define VKILL     3
+#define VEOF      4
+#define VEOL      5
+#define VEOL2     6
+#define VSWTC     7
+#define VSTART    8
+#define VSTOP     9
 
 #define VSUSP    10
-#define VDSUSP   11  /* SunOS POSIX nicety I do believe... */
+#define VDSUSP   11		/* SunOS POSIX nicety I do believe... */
 #define VREPRINT 12
 #define VDISCARD 13
 #define VWERASE  14
@@ -90,121 +85,83 @@ struct ktermios {
 #endif
 
 /* c_iflag bits */
-#define IGNBRK	0x00000001
-#define BRKINT	0x00000002
-#define IGNPAR	0x00000004
-#define PARMRK	0x00000008
-#define INPCK	0x00000010
-#define ISTRIP	0x00000020
-#define INLCR	0x00000040
-#define IGNCR	0x00000080
-#define ICRNL	0x00000100
-#define IUCLC	0x00000200
-#define IXON	0x00000400
-#define IXANY	0x00000800
-#define IXOFF	0x00001000
-#define IMAXBEL	0x00002000
-#define IUTF8   0x00004000
+#define IUCLC	0x0200
+#define IXON	0x0400
+#define IXOFF	0x1000
+#define IMAXBEL	0x2000
+#define IUTF8   0x4000
 
 /* c_oflag bits */
-#define OPOST	0x00000001
-#define OLCUC	0x00000002
-#define ONLCR	0x00000004
-#define OCRNL	0x00000008
-#define ONOCR	0x00000010
-#define ONLRET	0x00000020
-#define OFILL	0x00000040
-#define OFDEL	0x00000080
-#define NLDLY	0x00000100
-#define   NL0	0x00000000
-#define   NL1	0x00000100
-#define CRDLY	0x00000600
-#define   CR0	0x00000000
-#define   CR1	0x00000200
-#define   CR2	0x00000400
-#define   CR3	0x00000600
-#define TABDLY	0x00001800
-#define   TAB0	0x00000000
-#define   TAB1	0x00000800
-#define   TAB2	0x00001000
-#define   TAB3	0x00001800
-#define   XTABS	0x00001800
-#define BSDLY	0x00002000
-#define   BS0	0x00000000
-#define   BS1	0x00002000
-#define VTDLY	0x00004000
-#define   VT0	0x00000000
-#define   VT1	0x00004000
-#define FFDLY	0x00008000
-#define   FF0	0x00000000
-#define   FF1	0x00008000
-#define PAGEOUT 0x00010000  /* SUNOS specific */
-#define WRAP    0x00020000  /* SUNOS specific */
+#define OLCUC	0x00002
+#define ONLCR	0x00004
+#define NLDLY	0x00100
+#define   NL0	0x00000
+#define   NL1	0x00100
+#define CRDLY	0x00600
+#define   CR0	0x00000
+#define   CR1	0x00200
+#define   CR2	0x00400
+#define   CR3	0x00600
+#define TABDLY	0x01800
+#define   TAB0	0x00000
+#define   TAB1	0x00800
+#define   TAB2	0x01000
+#define   TAB3	0x01800
+#define   XTABS	0x01800
+#define BSDLY	0x02000
+#define   BS0	0x00000
+#define   BS1	0x02000
+#define VTDLY	0x04000
+#define   VT0	0x00000
+#define   VT1	0x04000
+#define FFDLY	0x08000
+#define   FF0	0x00000
+#define   FF1	0x08000
+#define PAGEOUT 0x10000			/* SUNOS specific */
+#define WRAP    0x20000			/* SUNOS specific */
 
 /* c_cflag bit meaning */
-#define CBAUD	  0x0000100f
-#define  B0	  0x00000000   /* hang up */
-#define  B50	  0x00000001
-#define  B75	  0x00000002
-#define  B110	  0x00000003
-#define  B134	  0x00000004
-#define  B150	  0x00000005
-#define  B200	  0x00000006
-#define  B300	  0x00000007
-#define  B600	  0x00000008
-#define  B1200	  0x00000009
-#define  B1800	  0x0000000a
-#define  B2400	  0x0000000b
-#define  B4800	  0x0000000c
-#define  B9600	  0x0000000d
-#define  B19200	  0x0000000e
-#define  B38400	  0x0000000f
-#define EXTA      B19200
-#define EXTB      B38400
-#define  CSIZE    0x00000030
-#define   CS5	  0x00000000
-#define   CS6	  0x00000010
-#define   CS7	  0x00000020
-#define   CS8	  0x00000030
-#define CSTOPB	  0x00000040
-#define CREAD	  0x00000080
-#define PARENB	  0x00000100
-#define PARODD	  0x00000200
-#define HUPCL	  0x00000400
-#define CLOCAL	  0x00000800
-#define CBAUDEX   0x00001000
+#define CBAUD		0x0000100f
+#define CSIZE		0x00000030
+#define   CS5		0x00000000
+#define   CS6		0x00000010
+#define   CS7		0x00000020
+#define   CS8		0x00000030
+#define CSTOPB		0x00000040
+#define CREAD		0x00000080
+#define PARENB		0x00000100
+#define PARODD		0x00000200
+#define HUPCL		0x00000400
+#define CLOCAL		0x00000800
+#define CBAUDEX		0x00001000
 /* We'll never see these speeds with the Zilogs, but for completeness... */
-#define  BOTHER   0x00001000
-#define  B57600   0x00001001
-#define  B115200  0x00001002
-#define  B230400  0x00001003
-#define  B460800  0x00001004
+#define BOTHER		0x00001000
+#define     B57600	0x00001001
+#define    B115200	0x00001002
+#define    B230400	0x00001003
+#define    B460800	0x00001004
 /* This is what we can do with the Zilogs. */
-#define  B76800   0x00001005
+#define     B76800	0x00001005
 /* This is what we can do with the SAB82532. */
-#define  B153600  0x00001006
-#define  B307200  0x00001007
-#define  B614400  0x00001008
-#define  B921600  0x00001009
+#define    B153600	0x00001006
+#define    B307200	0x00001007
+#define    B614400	0x00001008
+#define    B921600	0x00001009
 /* And these are the rest... */
-#define  B500000  0x0000100a
-#define  B576000  0x0000100b
-#define B1000000  0x0000100c
-#define B1152000  0x0000100d
-#define B1500000  0x0000100e
-#define B2000000  0x0000100f
+#define    B500000	0x0000100a
+#define    B576000	0x0000100b
+#define   B1000000	0x0000100c
+#define   B1152000	0x0000100d
+#define   B1500000	0x0000100e
+#define   B2000000	0x0000100f
 /* These have totally bogus values and nobody uses them
    so far. Later on we'd have to use say 0x10000x and
    adjust CBAUD constant and drivers accordingly.
-#define B2500000  0x00001010
-#define B3000000  0x00001011
-#define B3500000  0x00001012
-#define B4000000  0x00001013  */
-#define CIBAUD	  0x100f0000  /* input baud rate (not used) */
-#define CMSPAR	  0x40000000  /* mark or space (stick) parity */
-#define CRTSCTS	  0x80000000  /* flow control */
-
-#define IBSHIFT	  16		/* Shift from CBAUD to CIBAUD */
+#define   B2500000	0x00001010
+#define   B3000000	0x00001011
+#define   B3500000	0x00001012
+#define   B4000000	0x00001013 */
+#define CIBAUD		0x100f0000	/* input baud rate (not used) */
 
 /* c_lflag bits */
 #define ISIG	0x00000001
@@ -219,7 +176,7 @@ struct ktermios {
 #define ECHOCTL	0x00000200
 #define ECHOPRT	0x00000400
 #define ECHOKE	0x00000800
-#define DEFECHO 0x00001000  /* SUNOS thing, what is it? */
+#define DEFECHO 0x00001000		/* SUNOS thing, what is it? */
 #define FLUSHO	0x00002000
 #define PENDIN	0x00004000
 #define IEXTEN	0x00008000
@@ -244,21 +201,9 @@ struct ktermios {
 /* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
 #define TIOCSER_TEMT    0x01	/* Transmitter physically empty */
 
-
-/* tcflow() and TCXONC use these */
-#define	TCOOFF		0
-#define	TCOON		1
-#define	TCIOFF		2
-#define	TCION		3
-
-/* tcflush() and TCFLSH use these */
-#define	TCIFLUSH	0
-#define	TCOFLUSH	1
-#define	TCIOFLUSH	2
-
 /* tcsetattr uses these */
-#define	TCSANOW		0
-#define	TCSADRAIN	1
-#define	TCSAFLUSH	2
+#define TCSANOW		0
+#define TCSADRAIN	1
+#define TCSAFLUSH	2
 
 #endif /* _UAPI_SPARC_TERMBITS_H */