sparc32: switch to NO_BOOTMEM

Each populated sparc_phys_bank is added to memblock.memory. The
reserve_bootmem() calls are replaced with memblock_reserve(), and the
bootmem bitmap initialization is droppped.

Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

2 files changed, 21 insertions, 58 deletions

diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig
index 3ea098ea3d2a..e6f2a38d2e61 100644
--- a/arch/sparc/Kconfig
+++ b/arch/sparc/Kconfig
@@ -45,6 +45,8 @@ config SPARC
 	select LOCKDEP_SMALL if LOCKDEP
 	select NEED_DMA_MAP_STATE
 	select NEED_SG_DMA_LENGTH
+	select HAVE_MEMBLOCK
+	select NO_BOOTMEM
 
 config SPARC32
 	def_bool !64BIT
@@ -62,7 +64,6 @@ config SPARC64
 	select HAVE_KRETPROBES
 	select HAVE_KPROBES
 	select HAVE_RCU_TABLE_FREE if SMP
-	select HAVE_MEMBLOCK
 	select HAVE_MEMBLOCK_NODE_MAP
 	select HAVE_ARCH_TRANSPARENT_HUGEPAGE
 	select HAVE_DYNAMIC_FTRACE
@@ -81,7 +82,6 @@ config SPARC64
 	select IRQ_PREFLOW_FASTEOI
 	select ARCH_HAVE_NMI_SAFE_CMPXCHG
 	select HAVE_C_RECORDMCOUNT
-	select NO_BOOTMEM
 	select HAVE_ARCH_AUDITSYSCALL
 	select ARCH_SUPPORTS_ATOMIC_RMW
 	select HAVE_NMI
diff --git a/arch/sparc/mm/init_32.c b/arch/sparc/mm/init_32.c
index 3ec10b26e8ca..e786fe0f0059 100644
--- a/arch/sparc/mm/init_32.c
+++ b/arch/sparc/mm/init_32.c
@@ -23,6 +23,7 @@
 #include <linux/init.h>
 #include <linux/highmem.h>
 #include <linux/bootmem.h>
+#include <linux/memblock.h>
 #include <linux/pagemap.h>
 #include <linux/poison.h>
 #include <linux/gfp.h>
@@ -103,11 +104,14 @@ static unsigned long calc_max_low_pfn(void)
 
 unsigned long __init bootmem_init(unsigned long *pages_avail)
 {
-	unsigned long bootmap_size, start_pfn;
-	unsigned long end_of_phys_memory = 0UL;
-	unsigned long bootmap_pfn, bytes_avail, size;
+	unsigned long start_pfn, bytes_avail, size;
+	unsigned long end_of_phys_memory = 0;
+	unsigned long high_pages = 0;
 	int i;
 
+	memblock_set_bottom_up(true);
+	memblock_allow_resize();
+
 	bytes_avail = 0UL;
 	for (i = 0; sp_banks[i].num_bytes != 0; i++) {
 		end_of_phys_memory = sp_banks[i].base_addr +
@@ -124,12 +128,15 @@ unsigned long __init bootmem_init(unsigned long *pages_avail)
 				if (sp_banks[i].num_bytes == 0) {
 					sp_banks[i].base_addr = 0xdeadbeef;
 				} else {
+					memblock_add(sp_banks[i].base_addr,
+						     sp_banks[i].num_bytes);
 					sp_banks[i+1].num_bytes = 0;
 					sp_banks[i+1].base_addr = 0xdeadbeef;
 				}
 				break;
 			}
 		}
+		memblock_add(sp_banks[i].base_addr, sp_banks[i].num_bytes);
 	}
 
 	/* Start with page aligned address of last symbol in kernel
@@ -140,8 +147,6 @@ unsigned long __init bootmem_init(unsigned long *pages_avail)
 	/* Now shift down to get the real physical page frame number. */
 	start_pfn >>= PAGE_SHIFT;
 
-	bootmap_pfn = start_pfn;
-
 	max_pfn = end_of_phys_memory >> PAGE_SHIFT;
 
 	max_low_pfn = max_pfn;
@@ -150,12 +155,15 @@ unsigned long __init bootmem_init(unsigned long *pages_avail)
 	if (max_low_pfn > pfn_base + (SRMMU_MAXMEM >> PAGE_SHIFT)) {
 		highstart_pfn = pfn_base + (SRMMU_MAXMEM >> PAGE_SHIFT);
 		max_low_pfn = calc_max_low_pfn();
+		high_pages = calc_highpages();
 		printk(KERN_NOTICE "%ldMB HIGHMEM available.\n",
-		    calc_highpages() >> (20 - PAGE_SHIFT));
+		    high_pages >> (20 - PAGE_SHIFT));
 	}
 
 #ifdef CONFIG_BLK_DEV_INITRD
-	/* Now have to check initial ramdisk, so that bootmap does not overwrite it */
+	/* Now have to check initial ramdisk, so that it won't pass
+	 * the end of memory
+	 */
 	if (sparc_ramdisk_image) {
 		if (sparc_ramdisk_image >= (unsigned long)&_end - 2 * PAGE_SIZE)
 			sparc_ramdisk_image -= KERNBASE;
@@ -167,51 +175,12 @@ unsigned long __init bootmem_init(unsigned long *pages_avail)
 			       initrd_end, end_of_phys_memory);
 			initrd_start = 0;
 		}
-		if (initrd_start) {
-			if (initrd_start >= (start_pfn << PAGE_SHIFT) &&
-			    initrd_start < (start_pfn << PAGE_SHIFT) + 2 * PAGE_SIZE)
-				bootmap_pfn = PAGE_ALIGN (initrd_end) >> PAGE_SHIFT;
-		}
-	}
-#endif	
-	/* Initialize the boot-time allocator. */
-	bootmap_size = init_bootmem_node(NODE_DATA(0), bootmap_pfn, pfn_base,
-					 max_low_pfn);
-
-	/* Now register the available physical memory with the
-	 * allocator.
-	 */
-	*pages_avail = 0;
-	for (i = 0; sp_banks[i].num_bytes != 0; i++) {
-		unsigned long curr_pfn, last_pfn;
-
-		curr_pfn = sp_banks[i].base_addr >> PAGE_SHIFT;
-		if (curr_pfn >= max_low_pfn)
-			break;
-
-		last_pfn = (sp_banks[i].base_addr + sp_banks[i].num_bytes) >> PAGE_SHIFT;
-		if (last_pfn > max_low_pfn)
-			last_pfn = max_low_pfn;
-
-		/*
-		 * .. finally, did all the rounding and playing
-		 * around just make the area go away?
-		 */
-		if (last_pfn <= curr_pfn)
-			continue;
-
-		size = (last_pfn - curr_pfn) << PAGE_SHIFT;
-		*pages_avail += last_pfn - curr_pfn;
-
-		free_bootmem(sp_banks[i].base_addr, size);
 	}
 
-#ifdef CONFIG_BLK_DEV_INITRD
 	if (initrd_start) {
 		/* Reserve the initrd image area. */
 		size = initrd_end - initrd_start;
-		reserve_bootmem(initrd_start, size, BOOTMEM_DEFAULT);
-		*pages_avail -= PAGE_ALIGN(size) >> PAGE_SHIFT;
+		memblock_reserve(initrd_start, size);
 
 		initrd_start = (initrd_start - phys_base) + PAGE_OFFSET;
 		initrd_end = (initrd_end - phys_base) + PAGE_OFFSET;
@@ -219,16 +188,10 @@ unsigned long __init bootmem_init(unsigned long *pages_avail)
 #endif
 	/* Reserve the kernel text/data/bss. */
 	size = (start_pfn << PAGE_SHIFT) - phys_base;
-	reserve_bootmem(phys_base, size, BOOTMEM_DEFAULT);
-	*pages_avail -= PAGE_ALIGN(size) >> PAGE_SHIFT;
+	memblock_reserve(phys_base, size);
 
-	/* Reserve the bootmem map.   We do not account for it
-	 * in pages_avail because we will release that memory
-	 * in free_all_bootmem.
-	 */
-	size = bootmap_size;
-	reserve_bootmem((bootmap_pfn << PAGE_SHIFT), size, BOOTMEM_DEFAULT);
-	*pages_avail -= PAGE_ALIGN(size) >> PAGE_SHIFT;
+	size = memblock_phys_mem_size() - memblock_reserved_size();
+	*pages_avail = (size >> PAGE_SHIFT) - high_pages;
 
 	return max_pfn;
 }