diff options
| author | Pali Rohár <pali@kernel.org> | 2022-07-06 12:10:43 +0200 |
|---|---|---|
| committer | Michael Ellerman <mpe@ellerman.id.au> | 2022-07-27 21:36:03 +1000 |
| commit | 0c551abfa004ce154d487d91777bf221c808a64f (patch) | |
| tree | e751c95be631e23414181f12fbaf52a2710eddf2 /arch/powerpc/sysdev | |
| parent | 9257971377e2fe6e82f41f688651a82a2f160a88 (diff) | |
powerpc/fsl-pci: Fix Class Code of PCIe Root Port
By default old pre-3.0 Freescale PCIe controllers reports invalid PCI Class
Code 0x0b20 for PCIe Root Port. It can be seen by lspci -b output on P2020
board which has this pre-3.0 controller:
$ lspci -bvnn
00:00.0 Power PC [0b20]: Freescale Semiconductor Inc P2020E [1957:0070] (rev 21)
!!! Invalid class 0b20 for header type 01
Capabilities: [4c] Express Root Port (Slot-), MSI 00
Fix this issue by programming correct PCI Class Code 0x0604 for PCIe Root
Port to the Freescale specific PCIe register 0x474.
With this change lspci -b output is:
$ lspci -bvnn
00:00.0 PCI bridge [0604]: Freescale Semiconductor Inc P2020E [1957:0070] (rev 21) (prog-if 00 [Normal decode])
Capabilities: [4c] Express Root Port (Slot-), MSI 00
Without any "Invalid class" error. So class code was properly reflected
into standard (read-only) PCI register 0x08.
Same fix is already implemented in U-Boot pcie_fsl.c driver in commit:
http://source.denx.de/u-boot/u-boot/-/commit/d18d06ac35229345a0af80977a408cfbe1d1015b
Fix activated by U-Boot stay active also after booting Linux kernel.
But boards which use older U-Boot version without that fix are affected and
still require this fix.
So implement this class code fix also in kernel fsl_pci.c driver.
Cc: stable@vger.kernel.org
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220706101043.4867-1-pali@kernel.org
Diffstat (limited to 'arch/powerpc/sysdev')
| -rw-r--r-- | arch/powerpc/sysdev/fsl_pci.c | 8 | ||||
| -rw-r--r-- | arch/powerpc/sysdev/fsl_pci.h | 1 |
2 files changed, 9 insertions, 0 deletions
diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c index e8d072e98b66..af6c8ca824d3 100644 --- a/arch/powerpc/sysdev/fsl_pci.c +++ b/arch/powerpc/sysdev/fsl_pci.c @@ -522,6 +522,7 @@ int fsl_add_bridge(struct platform_device *pdev, int is_primary) struct resource rsrc; const int *bus_range; u8 hdr_type, progif; + u32 class_code; struct device_node *dev; struct ccsr_pci __iomem *pci; u16 temp; @@ -595,6 +596,13 @@ int fsl_add_bridge(struct platform_device *pdev, int is_primary) PPC_INDIRECT_TYPE_SURPRESS_PRIMARY_BUS; if (fsl_pcie_check_link(hose)) hose->indirect_type |= PPC_INDIRECT_TYPE_NO_PCIE_LINK; + /* Fix Class Code to PCI_CLASS_BRIDGE_PCI_NORMAL for pre-3.0 controller */ + if (in_be32(&pci->block_rev1) < PCIE_IP_REV_3_0) { + early_read_config_dword(hose, 0, 0, PCIE_FSL_CSR_CLASSCODE, &class_code); + class_code &= 0xff; + class_code |= PCI_CLASS_BRIDGE_PCI_NORMAL << 8; + early_write_config_dword(hose, 0, 0, PCIE_FSL_CSR_CLASSCODE, class_code); + } } else { /* * Set PBFR(PCI Bus Function Register)[10] = 1 to diff --git a/arch/powerpc/sysdev/fsl_pci.h b/arch/powerpc/sysdev/fsl_pci.h index cdbde2e0c96e..093a875d7d1e 100644 --- a/arch/powerpc/sysdev/fsl_pci.h +++ b/arch/powerpc/sysdev/fsl_pci.h @@ -18,6 +18,7 @@ struct platform_device; #define PCIE_LTSSM 0x0404 /* PCIE Link Training and Status */ #define PCIE_LTSSM_L0 0x16 /* L0 state */ +#define PCIE_FSL_CSR_CLASSCODE 0x474 /* FSL GPEX CSR */ #define PCIE_IP_REV_2_2 0x02080202 /* PCIE IP block version Rev2.2 */ #define PCIE_IP_REV_3_0 0x02080300 /* PCIE IP block version Rev3.0 */ #define PIWAR_EN 0x80000000 /* Enable */ |